diff options
Diffstat (limited to 'drivers/staging/benet/fwcmd_opcodes.h')
| -rw-r--r-- | drivers/staging/benet/fwcmd_opcodes.h | 244 |
1 files changed, 0 insertions, 244 deletions
diff --git a/drivers/staging/benet/fwcmd_opcodes.h b/drivers/staging/benet/fwcmd_opcodes.h deleted file mode 100644 index 23d569386b46..000000000000 --- a/drivers/staging/benet/fwcmd_opcodes.h +++ /dev/null @@ -1,244 +0,0 @@ -/* - * Copyright (C) 2005 - 2008 ServerEngines - * All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. The full GNU General - * Public License is included in this distribution in the file called COPYING. - * - * Contact Information: - * linux-drivers@serverengines.com - * - * ServerEngines - * 209 N. Fair Oaks Ave - * Sunnyvale, CA 94085 - */ -/* - * Autogenerated by srcgen version: 0127 - */ -#ifndef __fwcmd_opcodes_amap_h__ -#define __fwcmd_opcodes_amap_h__ - -/* - * --- FWCMD_SUBSYSTEMS --- - * The commands are grouped into the following subsystems. The subsystem - * code along with the opcode uniquely identify a particular fwcmd. - */ -#define FWCMD_SUBSYSTEM_RSVD (0) /* This subsystem is reserved. It is */ - /* never used. */ -#define FWCMD_SUBSYSTEM_COMMON (1) /* CMDs in this group are common to - * all subsystems. See - * COMMON_SUBSYSTEM_OPCODES for opcodes - * and Common Host Configuration CMDs - * for the FWCMD descriptions. - */ -#define FWCMD_SUBSYSTEM_COMMON_ISCSI (2) /* CMDs in this group are */ - /* - * common to Initiator and Target. See - * COMMON_ISCSI_SUBSYSTEM_OPCODES and - * Common iSCSI Initiator and Target - * CMDs for the command descriptions. - */ -#define FWCMD_SUBSYSTEM_ETH (3) /* This subsystem is used to - execute Ethernet commands. */ - -#define FWCMD_SUBSYSTEM_TPM (4) /* This subsystem is used - to execute TPM commands. */ -#define FWCMD_SUBSYSTEM_PXE_UNDI (5) /* This subsystem is used - * to execute PXE - * and UNDI specific commands. - */ - -#define FWCMD_SUBSYSTEM_ISCSI_INI (6) /* This subsystem is used to - execute ISCSI Initiator - specific commands. - */ -#define FWCMD_SUBSYSTEM_ISCSI_TGT (7) /* This subsystem is used - to execute iSCSI Target - specific commands.between - PTL and ARM firmware. - */ -#define FWCMD_SUBSYSTEM_MILI_PTL (8) /* This subsystem is used to - execute iSCSI Target specific - commands.between MILI - and PTL. */ -#define FWCMD_SUBSYSTEM_MILI_TMD (9) /* This subsystem is used to - execute iSCSI Target specific - commands between MILI - and TMD. */ -#define FWCMD_SUBSYSTEM_PROXY (11) /* This subsystem is used - to execute proxied commands - within the host at the - explicit request of a - non priviledged domain. - This 'subsystem' is entirely - virtual from the controller - and firmware perspective as - it is implemented in host - drivers. - */ - -/* - * --- COMMON_SUBSYSTEM_OPCODES --- - * These opcodes are common to both networking and storage PCI - * functions. They are used to reserve resources and configure - * BladeEngine. These opcodes all use the FWCMD_SUBSYSTEM_COMMON - * subsystem code. - */ -#define OPCODE_COMMON_NTWK_MAC_QUERY (1) -#define SUBSYSTEM_COMMON_NTWK_MAC_QUERY (1) -#define SUBSYSTEM_COMMON_NTWK_MAC_SET (1) -#define SUBSYSTEM_COMMON_NTWK_MULTICAST_SET (1) -#define SUBSYSTEM_COMMON_NTWK_VLAN_CONFIG (1) -#define SUBSYSTEM_COMMON_NTWK_LINK_STATUS_QUERY (1) -#define SUBSYSTEM_COMMON_READ_FLASHROM (1) -#define SUBSYSTEM_COMMON_WRITE_FLASHROM (1) -#define SUBSYSTEM_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (1) -#define SUBSYSTEM_COMMON_ADD_PAGE_TABLES (1) -#define SUBSYSTEM_COMMON_REMOVE_PAGE_TABLES (1) -#define SUBSYSTEM_COMMON_RING_DESTROY (1) -#define SUBSYSTEM_COMMON_CQ_CREATE (1) -#define SUBSYSTEM_COMMON_EQ_CREATE (1) -#define SUBSYSTEM_COMMON_ETH_RX_CREATE (1) -#define SUBSYSTEM_COMMON_ETH_TX_CREATE (1) -#define SUBSYSTEM_COMMON_ISCSI_DEFQ_CREATE (1) -#define SUBSYSTEM_COMMON_ISCSI_WRBQ_CREATE (1) -#define SUBSYSTEM_COMMON_MCC_CREATE (1) -#define SUBSYSTEM_COMMON_JELL_CONFIG (1) -#define SUBSYSTEM_COMMON_FORCE_FAILOVER (1) -#define SUBSYSTEM_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (1) -#define SUBSYSTEM_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (1) -#define SUBSYSTEM_COMMON_POST_ZERO_BUFFER (1) -#define SUBSYSTEM_COMMON_GET_QOS (1) -#define SUBSYSTEM_COMMON_SET_QOS (1) -#define SUBSYSTEM_COMMON_TCP_GET_STATISTICS (1) -#define SUBSYSTEM_COMMON_SEEPROM_READ (1) -#define SUBSYSTEM_COMMON_TCP_STATE_QUERY (1) -#define SUBSYSTEM_COMMON_GET_CNTL_ATTRIBUTES (1) -#define SUBSYSTEM_COMMON_NOP (1) -#define SUBSYSTEM_COMMON_NTWK_RX_FILTER (1) -#define SUBSYSTEM_COMMON_GET_FW_VERSION (1) -#define SUBSYSTEM_COMMON_SET_FLOW_CONTROL (1) -#define SUBSYSTEM_COMMON_GET_FLOW_CONTROL (1) -#define SUBSYSTEM_COMMON_SET_TCP_PARAMETERS (1) -#define SUBSYSTEM_COMMON_SET_FRAME_SIZE (1) -#define SUBSYSTEM_COMMON_GET_FAT (1) -#define SUBSYSTEM_COMMON_MODIFY_EQ_DELAY (1) -#define SUBSYSTEM_COMMON_FIRMWARE_CONFIG (1) -#define SUBSYSTEM_COMMON_ENABLE_DISABLE_DOMAINS (1) -#define SUBSYSTEM_COMMON_GET_DOMAIN_CONFIG (1) -#define SUBSYSTEM_COMMON_SET_VLD_CONFIG (1) -#define SUBSYSTEM_COMMON_GET_VLD_CONFIG (1) -#define SUBSYSTEM_COMMON_GET_PORT_EQUALIZATION (1) -#define SUBSYSTEM_COMMON_SET_PORT_EQUALIZATION (1) -#define SUBSYSTEM_COMMON_RED_CONFIG (1) -#define OPCODE_COMMON_NTWK_MAC_SET (2) -#define OPCODE_COMMON_NTWK_MULTICAST_SET (3) -#define OPCODE_COMMON_NTWK_VLAN_CONFIG (4) -#define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY (5) -#define OPCODE_COMMON_READ_FLASHROM (6) -#define OPCODE_COMMON_WRITE_FLASHROM (7) -#define OPCODE_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (8) -#define OPCODE_COMMON_ADD_PAGE_TABLES (9) -#define OPCODE_COMMON_REMOVE_PAGE_TABLES (10) -#define OPCODE_COMMON_RING_DESTROY (11) -#define OPCODE_COMMON_CQ_CREATE (12) -#define OPCODE_COMMON_EQ_CREATE (13) -#define OPCODE_COMMON_ETH_RX_CREATE (14) -#define OPCODE_COMMON_ETH_TX_CREATE (15) -#define OPCODE_COMMON_NET_RESERVED0 (16) /* Reserved */ -#define OPCODE_COMMON_NET_RESERVED1 (17) /* Reserved */ -#define OPCODE_COMMON_NET_RESERVED2 (18) /* Reserved */ -#define OPCODE_COMMON_ISCSI_DEFQ_CREATE (19) -#define OPCODE_COMMON_ISCSI_WRBQ_CREATE (20) -#define OPCODE_COMMON_MCC_CREATE (21) -#define OPCODE_COMMON_JELL_CONFIG (22) -#define OPCODE_COMMON_FORCE_FAILOVER (23) -#define OPCODE_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (24) -#define OPCODE_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (25) -#define OPCODE_COMMON_POST_ZERO_BUFFER (26) -#define OPCODE_COMMON_GET_QOS (27) -#define OPCODE_COMMON_SET_QOS (28) -#define OPCODE_COMMON_TCP_GET_STATISTICS (29) -#define OPCODE_COMMON_SEEPROM_READ (30) -#define OPCODE_COMMON_TCP_STATE_QUERY (31) -#define OPCODE_COMMON_GET_CNTL_ATTRIBUTES (32) -#define OPCODE_COMMON_NOP (33) -#define OPCODE_COMMON_NTWK_RX_FILTER (34) -#define OPCODE_COMMON_GET_FW_VERSION (35) -#define OPCODE_COMMON_SET_FLOW_CONTROL (36) -#define OPCODE_COMMON_GET_FLOW_CONTROL (37) -#define OPCODE_COMMON_SET_TCP_PARAMETERS (38) -#define OPCODE_COMMON_SET_FRAME_SIZE (39) -#define OPCODE_COMMON_GET_FAT (40) -#define OPCODE_COMMON_MODIFY_EQ_DELAY (41) -#define OPCODE_COMMON_FIRMWARE_CONFIG (42) -#define OPCODE_COMMON_ENABLE_DISABLE_DOMAINS (43) -#define OPCODE_COMMON_GET_DOMAIN_CONFIG (44) -#define OPCODE_COMMON_SET_VLD_CONFIG (45) -#define OPCODE_COMMON_GET_VLD_CONFIG (46) -#define OPCODE_COMMON_GET_PORT_EQUALIZATION (47) -#define OPCODE_COMMON_SET_PORT_EQUALIZATION (48) -#define OPCODE_COMMON_RED_CONFIG (49) - - - -/* - * --- ETH_SUBSYSTEM_OPCODES --- - * These opcodes are used for configuring the Ethernet interfaces. These - * opcodes all use the FWCMD_SUBSYSTEM_ETH subsystem code. - */ -#define OPCODE_ETH_RSS_CONFIG (1) -#define OPCODE_ETH_ACPI_CONFIG (2) -#define SUBSYSTEM_ETH_RSS_CONFIG (3) -#define SUBSYSTEM_ETH_ACPI_CONFIG (3) -#define OPCODE_ETH_PROMISCUOUS (3) -#define SUBSYSTEM_ETH_PROMISCUOUS (3) -#define SUBSYSTEM_ETH_GET_STATISTICS (3) -#define SUBSYSTEM_ETH_GET_RX_FRAG_SIZE (3) -#define SUBSYSTEM_ETH_SET_RX_FRAG_SIZE (3) -#define OPCODE_ETH_GET_STATISTICS (4) -#define OPCODE_ETH_GET_RX_FRAG_SIZE (5) -#define OPCODE_ETH_SET_RX_FRAG_SIZE (6) - - - - - -/* - * --- MCC_STATUS_CODE --- - * These are the global status codes used by all subsystems - */ -#define MCC_STATUS_SUCCESS (0) /* Indicates a successful - completion of the command */ -#define MCC_STATUS_INSUFFICIENT_PRIVILEGES (1) /* The client does not have - sufficient privileges to - execute the command */ -#define MCC_STATUS_INVALID_PARAMETER (2) /* A parameter in the command - was invalid. The extended - status contains the index - of the parameter */ -#define MCC_STATUS_INSUFFICIENT_RESOURCES (3) /* There are insufficient - chip resources to execute - the command */ -#define MCC_STATUS_QUEUE_FLUSHING (4) /* The command is completing - because the queue was - getting flushed */ -#define MCC_STATUS_DMA_FAILED (5) /* The command is completing - with a DMA error */ - -/* - * --- MGMT_ERROR_CODES --- - * Error Codes returned in the status field of the FWCMD response header - */ -#define MGMT_STATUS_SUCCESS (0) /* The FWCMD completed - without errors */ -#define MGMT_STATUS_FAILED (1) /* Error status in the Status - field of the - struct FWCMD_RESPONSE_HEADER */ -#define MGMT_STATUS_ILLEGAL_REQUEST (2) /* Invalid FWCMD opcode */ -#define MGMT_STATUS_ILLEGAL_FIELD (3) /* Invalid parameter in - the FWCMD payload */ - -#endif /* __fwcmd_opcodes_amap_h__ */ |