diff options
Diffstat (limited to 'drivers/staging/benet/fwcmd_opcodes.h')
| -rw-r--r-- | drivers/staging/benet/fwcmd_opcodes.h | 244 |
1 files changed, 244 insertions, 0 deletions
diff --git a/drivers/staging/benet/fwcmd_opcodes.h b/drivers/staging/benet/fwcmd_opcodes.h new file mode 100644 index 000000000000..23d569386b46 --- /dev/null +++ b/drivers/staging/benet/fwcmd_opcodes.h @@ -0,0 +1,244 @@ +/* + * Copyright (C) 2005 - 2008 ServerEngines + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. The full GNU General + * Public License is included in this distribution in the file called COPYING. + * + * Contact Information: + * linux-drivers@serverengines.com + * + * ServerEngines + * 209 N. Fair Oaks Ave + * Sunnyvale, CA 94085 + */ +/* + * Autogenerated by srcgen version: 0127 + */ +#ifndef __fwcmd_opcodes_amap_h__ +#define __fwcmd_opcodes_amap_h__ + +/* + * --- FWCMD_SUBSYSTEMS --- + * The commands are grouped into the following subsystems. The subsystem + * code along with the opcode uniquely identify a particular fwcmd. + */ +#define FWCMD_SUBSYSTEM_RSVD (0) /* This subsystem is reserved. It is */ + /* never used. */ +#define FWCMD_SUBSYSTEM_COMMON (1) /* CMDs in this group are common to + * all subsystems. See + * COMMON_SUBSYSTEM_OPCODES for opcodes + * and Common Host Configuration CMDs + * for the FWCMD descriptions. + */ +#define FWCMD_SUBSYSTEM_COMMON_ISCSI (2) /* CMDs in this group are */ + /* + * common to Initiator and Target. See + * COMMON_ISCSI_SUBSYSTEM_OPCODES and + * Common iSCSI Initiator and Target + * CMDs for the command descriptions. + */ +#define FWCMD_SUBSYSTEM_ETH (3) /* This subsystem is used to + execute Ethernet commands. */ + +#define FWCMD_SUBSYSTEM_TPM (4) /* This subsystem is used + to execute TPM commands. */ +#define FWCMD_SUBSYSTEM_PXE_UNDI (5) /* This subsystem is used + * to execute PXE + * and UNDI specific commands. + */ + +#define FWCMD_SUBSYSTEM_ISCSI_INI (6) /* This subsystem is used to + execute ISCSI Initiator + specific commands. + */ +#define FWCMD_SUBSYSTEM_ISCSI_TGT (7) /* This subsystem is used + to execute iSCSI Target + specific commands.between + PTL and ARM firmware. + */ +#define FWCMD_SUBSYSTEM_MILI_PTL (8) /* This subsystem is used to + execute iSCSI Target specific + commands.between MILI + and PTL. */ +#define FWCMD_SUBSYSTEM_MILI_TMD (9) /* This subsystem is used to + execute iSCSI Target specific + commands between MILI + and TMD. */ +#define FWCMD_SUBSYSTEM_PROXY (11) /* This subsystem is used + to execute proxied commands + within the host at the + explicit request of a + non priviledged domain. + This 'subsystem' is entirely + virtual from the controller + and firmware perspective as + it is implemented in host + drivers. + */ + +/* + * --- COMMON_SUBSYSTEM_OPCODES --- + * These opcodes are common to both networking and storage PCI + * functions. They are used to reserve resources and configure + * BladeEngine. These opcodes all use the FWCMD_SUBSYSTEM_COMMON + * subsystem code. + */ +#define OPCODE_COMMON_NTWK_MAC_QUERY (1) +#define SUBSYSTEM_COMMON_NTWK_MAC_QUERY (1) +#define SUBSYSTEM_COMMON_NTWK_MAC_SET (1) +#define SUBSYSTEM_COMMON_NTWK_MULTICAST_SET (1) +#define SUBSYSTEM_COMMON_NTWK_VLAN_CONFIG (1) +#define SUBSYSTEM_COMMON_NTWK_LINK_STATUS_QUERY (1) +#define SUBSYSTEM_COMMON_READ_FLASHROM (1) +#define SUBSYSTEM_COMMON_WRITE_FLASHROM (1) +#define SUBSYSTEM_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (1) +#define SUBSYSTEM_COMMON_ADD_PAGE_TABLES (1) +#define SUBSYSTEM_COMMON_REMOVE_PAGE_TABLES (1) +#define SUBSYSTEM_COMMON_RING_DESTROY (1) +#define SUBSYSTEM_COMMON_CQ_CREATE (1) +#define SUBSYSTEM_COMMON_EQ_CREATE (1) +#define SUBSYSTEM_COMMON_ETH_RX_CREATE (1) +#define SUBSYSTEM_COMMON_ETH_TX_CREATE (1) +#define SUBSYSTEM_COMMON_ISCSI_DEFQ_CREATE (1) +#define SUBSYSTEM_COMMON_ISCSI_WRBQ_CREATE (1) +#define SUBSYSTEM_COMMON_MCC_CREATE (1) +#define SUBSYSTEM_COMMON_JELL_CONFIG (1) +#define SUBSYSTEM_COMMON_FORCE_FAILOVER (1) +#define SUBSYSTEM_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (1) +#define SUBSYSTEM_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (1) +#define SUBSYSTEM_COMMON_POST_ZERO_BUFFER (1) +#define SUBSYSTEM_COMMON_GET_QOS (1) +#define SUBSYSTEM_COMMON_SET_QOS (1) +#define SUBSYSTEM_COMMON_TCP_GET_STATISTICS (1) +#define SUBSYSTEM_COMMON_SEEPROM_READ (1) +#define SUBSYSTEM_COMMON_TCP_STATE_QUERY (1) +#define SUBSYSTEM_COMMON_GET_CNTL_ATTRIBUTES (1) +#define SUBSYSTEM_COMMON_NOP (1) +#define SUBSYSTEM_COMMON_NTWK_RX_FILTER (1) +#define SUBSYSTEM_COMMON_GET_FW_VERSION (1) +#define SUBSYSTEM_COMMON_SET_FLOW_CONTROL (1) +#define SUBSYSTEM_COMMON_GET_FLOW_CONTROL (1) +#define SUBSYSTEM_COMMON_SET_TCP_PARAMETERS (1) +#define SUBSYSTEM_COMMON_SET_FRAME_SIZE (1) +#define SUBSYSTEM_COMMON_GET_FAT (1) +#define SUBSYSTEM_COMMON_MODIFY_EQ_DELAY (1) +#define SUBSYSTEM_COMMON_FIRMWARE_CONFIG (1) +#define SUBSYSTEM_COMMON_ENABLE_DISABLE_DOMAINS (1) +#define SUBSYSTEM_COMMON_GET_DOMAIN_CONFIG (1) +#define SUBSYSTEM_COMMON_SET_VLD_CONFIG (1) +#define SUBSYSTEM_COMMON_GET_VLD_CONFIG (1) +#define SUBSYSTEM_COMMON_GET_PORT_EQUALIZATION (1) +#define SUBSYSTEM_COMMON_SET_PORT_EQUALIZATION (1) +#define SUBSYSTEM_COMMON_RED_CONFIG (1) +#define OPCODE_COMMON_NTWK_MAC_SET (2) +#define OPCODE_COMMON_NTWK_MULTICAST_SET (3) +#define OPCODE_COMMON_NTWK_VLAN_CONFIG (4) +#define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY (5) +#define OPCODE_COMMON_READ_FLASHROM (6) +#define OPCODE_COMMON_WRITE_FLASHROM (7) +#define OPCODE_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (8) +#define OPCODE_COMMON_ADD_PAGE_TABLES (9) +#define OPCODE_COMMON_REMOVE_PAGE_TABLES (10) +#define OPCODE_COMMON_RING_DESTROY (11) +#define OPCODE_COMMON_CQ_CREATE (12) +#define OPCODE_COMMON_EQ_CREATE (13) +#define OPCODE_COMMON_ETH_RX_CREATE (14) +#define OPCODE_COMMON_ETH_TX_CREATE (15) +#define OPCODE_COMMON_NET_RESERVED0 (16) /* Reserved */ +#define OPCODE_COMMON_NET_RESERVED1 (17) /* Reserved */ +#define OPCODE_COMMON_NET_RESERVED2 (18) /* Reserved */ +#define OPCODE_COMMON_ISCSI_DEFQ_CREATE (19) +#define OPCODE_COMMON_ISCSI_WRBQ_CREATE (20) +#define OPCODE_COMMON_MCC_CREATE (21) +#define OPCODE_COMMON_JELL_CONFIG (22) +#define OPCODE_COMMON_FORCE_FAILOVER (23) +#define OPCODE_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (24) +#define OPCODE_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (25) +#define OPCODE_COMMON_POST_ZERO_BUFFER (26) +#define OPCODE_COMMON_GET_QOS (27) +#define OPCODE_COMMON_SET_QOS (28) +#define OPCODE_COMMON_TCP_GET_STATISTICS (29) +#define OPCODE_COMMON_SEEPROM_READ (30) +#define OPCODE_COMMON_TCP_STATE_QUERY (31) +#define OPCODE_COMMON_GET_CNTL_ATTRIBUTES (32) +#define OPCODE_COMMON_NOP (33) +#define OPCODE_COMMON_NTWK_RX_FILTER (34) +#define OPCODE_COMMON_GET_FW_VERSION (35) +#define OPCODE_COMMON_SET_FLOW_CONTROL (36) +#define OPCODE_COMMON_GET_FLOW_CONTROL (37) +#define OPCODE_COMMON_SET_TCP_PARAMETERS (38) +#define OPCODE_COMMON_SET_FRAME_SIZE (39) +#define OPCODE_COMMON_GET_FAT (40) +#define OPCODE_COMMON_MODIFY_EQ_DELAY (41) +#define OPCODE_COMMON_FIRMWARE_CONFIG (42) +#define OPCODE_COMMON_ENABLE_DISABLE_DOMAINS (43) +#define OPCODE_COMMON_GET_DOMAIN_CONFIG (44) +#define OPCODE_COMMON_SET_VLD_CONFIG (45) +#define OPCODE_COMMON_GET_VLD_CONFIG (46) +#define OPCODE_COMMON_GET_PORT_EQUALIZATION (47) +#define OPCODE_COMMON_SET_PORT_EQUALIZATION (48) +#define OPCODE_COMMON_RED_CONFIG (49) + + + +/* + * --- ETH_SUBSYSTEM_OPCODES --- + * These opcodes are used for configuring the Ethernet interfaces. These + * opcodes all use the FWCMD_SUBSYSTEM_ETH subsystem code. + */ +#define OPCODE_ETH_RSS_CONFIG (1) +#define OPCODE_ETH_ACPI_CONFIG (2) +#define SUBSYSTEM_ETH_RSS_CONFIG (3) +#define SUBSYSTEM_ETH_ACPI_CONFIG (3) +#define OPCODE_ETH_PROMISCUOUS (3) +#define SUBSYSTEM_ETH_PROMISCUOUS (3) +#define SUBSYSTEM_ETH_GET_STATISTICS (3) +#define SUBSYSTEM_ETH_GET_RX_FRAG_SIZE (3) +#define SUBSYSTEM_ETH_SET_RX_FRAG_SIZE (3) +#define OPCODE_ETH_GET_STATISTICS (4) +#define OPCODE_ETH_GET_RX_FRAG_SIZE (5) +#define OPCODE_ETH_SET_RX_FRAG_SIZE (6) + + + + + +/* + * --- MCC_STATUS_CODE --- + * These are the global status codes used by all subsystems + */ +#define MCC_STATUS_SUCCESS (0) /* Indicates a successful + completion of the command */ +#define MCC_STATUS_INSUFFICIENT_PRIVILEGES (1) /* The client does not have + sufficient privileges to + execute the command */ +#define MCC_STATUS_INVALID_PARAMETER (2) /* A parameter in the command + was invalid. The extended + status contains the index + of the parameter */ +#define MCC_STATUS_INSUFFICIENT_RESOURCES (3) /* There are insufficient + chip resources to execute + the command */ +#define MCC_STATUS_QUEUE_FLUSHING (4) /* The command is completing + because the queue was + getting flushed */ +#define MCC_STATUS_DMA_FAILED (5) /* The command is completing + with a DMA error */ + +/* + * --- MGMT_ERROR_CODES --- + * Error Codes returned in the status field of the FWCMD response header + */ +#define MGMT_STATUS_SUCCESS (0) /* The FWCMD completed + without errors */ +#define MGMT_STATUS_FAILED (1) /* Error status in the Status + field of the + struct FWCMD_RESPONSE_HEADER */ +#define MGMT_STATUS_ILLEGAL_REQUEST (2) /* Invalid FWCMD opcode */ +#define MGMT_STATUS_ILLEGAL_FIELD (3) /* Invalid parameter in + the FWCMD payload */ + +#endif /* __fwcmd_opcodes_amap_h__ */ |