aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c')
-rw-r--r--drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c1047
1 files changed, 1047 insertions, 0 deletions
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
new file mode 100644
index 000000000000..c96aee09e1b6
--- /dev/null
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
@@ -0,0 +1,1047 @@
+/*
+ * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
+ *
+ * ADDI-DATA GmbH
+ * Dieselstrasse 3
+ * D-77833 Ottersweier
+ * Tel: +19(0)7223/9493-0
+ * Fax: +49(0)7223/9493-92
+ * http://www.addi-data-com
+ * info@addi-data.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+/*
+ | Description : APCI-1710 82X54 timer module |
+*/
+
+#include "APCI1710_82x54.h"
+
+/*
++----------------------------------------------------------------------------+
+| Function Name : _INT_ i_APCI1710_InitTimer |
+| (BYTE_ b_BoardHandle, |
+| BYTE_ b_ModulNbr, |
+| BYTE_ b_TimerNbr, |
+| BYTE_ b_TimerMode, |
+| ULONG_ ul_ReloadValue, |
+| BYTE_ b_InputClockSelection, |
+| BYTE_ b_InputClockLevel, |
+| BYTE_ b_OutputLevel, |
+| BYTE_ b_HardwareGateLevel)
+INT i_InsnConfig_InitTimer(struct comedi_device *dev,struct comedi_subdevice *s,
+ struct comedi_insn *insn,unsigned int *data)
+|
++----------------------------------------------------------------------------+
+| Task : Configure the Timer (b_TimerNbr) operating mode |
+| (b_TimerMode) from selected module (b_ModulNbr). |
+| You must calling this function be for you call any |
+| other function witch access of the timer. |
+| |
+| |
+| Timer mode description table |
+| |
+|+--------+-----------------------------+--------------+--------------------+|
+||Selected+ Mode description +u_ReloadValue | Hardware gate input||
+|| mode | | description | action ||
+|+--------+-----------------------------+--------------+--------------------+|
+|| |Mode 0 is typically used | | ||
+|| |for event counting. After | | ||
+|| |the initialisation, OUT | | ||
+|| |is initially low, and | | ||
+|| 0 |will remain low until the |Start counting| Hardware gate ||
+|| |counter reaches zero. | value | ||
+|| |OUT then goes high and | | ||
+|| |remains high until a new | | ||
+|| |count is written. See | | ||
+|| |"i_APCI1710_WriteTimerValue" | | ||
+|| |function. | | ||
+|+--------+-----------------------------+--------------+--------------------+|
+|| |Mode 1 is similar to mode 0 | | ||
+|| |except for the gate input | | ||
+|| 1 |action. The gate input is not|Start counting| Hardware trigger ||
+|| |used for enabled or disabled | value | ||
+|| |the timer. | | ||
+|| |The gate input is used for | | ||
+|| |triggered the timer. | | ||
+|+--------+-----------------------------+--------------+--------------------+|
+|| |This mode functions like a | | ||
+|| |divide-by-ul_ReloadValue | | ||
+|| |counter. It is typically used| | ||
+|| |to generate a real time clock| | ||
+|| |interrupt. OUT will initially| | ||
+|| 2 |be high after the | Division | Hardware gate ||
+|| |initialisation. When the | factor | ||
+|| |initial count has decremented| | ||
+|| |to 1, OUT goes low for one | | ||
+|| |CLK pule. OUT then goes high | | ||
+|| |again, the counter reloads | | ||
+|| |the initial count | | ||
+|| |(ul_ReloadValue) and the | | ||
+|| |process is repeated. | | ||
+|| |This action can generated a | | ||
+|| |interrupt. See function | | ||
+|| |"i_APCI1710_SetBoardInt- | | ||
+|| |RoutineX" | | ||
+|| |and "i_APCI1710_EnableTimer" | | ||
+|+--------+-----------------------------+--------------+--------------------+|
+|| |Mode 3 is typically used for | | ||
+|| |baud rate generation. This | | ||
+|| |mode is similar to mode 2 | | ||
+|| |except for the duty cycle of | | ||
+|| 3 |OUT. OUT will initially be | Division | Hardware gate ||
+|| |high after the initialisation| factor | ||
+|| |When half the initial count | | ||
+|| |(ul_ReloadValue) has expired,| | ||
+|| |OUT goes low for the | | ||
+|| |remainder of the count. The | | ||
+|| |mode is periodic; the | | ||
+|| |sequence above is repeated | | ||
+|| |indefinitely. | | ||
+|+--------+-----------------------------+--------------+--------------------+|
+|| |OUT will be initially high | | ||
+|| |after the initialisation. | | ||
+|| |When the initial count | | ||
+|| 4 |expires OUT will go low for |Start counting| Hardware gate ||
+|| |one CLK pulse and then go | value | ||
+|| |high again. | | ||
+|| |The counting sequences is | | ||
+|| |triggered by writing a new | | ||
+|| |value. See | | ||
+|| |"i_APCI1710_WriteTimerValue" | | ||
+|| |function. If a new count is | | ||
+|| |written during counting, | | ||
+|| |it will be loaded on the | | ||
+|| |next CLK pulse | | ||
+|+--------+-----------------------------+--------------+--------------------+|
+|| |Mode 5 is similar to mode 4 | | ||
+|| |except for the gate input | | ||
+|| |action. The gate input is not| | ||
+|| 5 |used for enabled or disabled |Start counting| Hardware trigger ||
+|| |the timer. The gate input is | value | ||
+|| |used for triggered the timer.| | ||
+|+--------+-----------------------------+--------------+--------------------+|
+| |
+| |
+| |
+| Input clock selection table |
+| |
+| +--------------------------------+------------------------------------+ |
+| | b_InputClockSelection | Description | |
+| | parameter | | |
+| +--------------------------------+------------------------------------+ |
+| | APCI1710_PCI_BUS_CLOCK | For the timer input clock, the PCI | |
+| | | bus clock / 4 is used. This PCI bus| |
+| | | clock can be 30MHz or 33MHz. For | |
+| | | Timer 0 only this selection are | |
+| | | available. | |
+| +--------------------------------+------------------------------------+ |
+| | APCI1710_ FRONT_CONNECTOR_INPUT| Of the front connector you have the| |
+| | | possibility to inject a input clock| |
+| | | for Timer 1 or Timer 2. The source | |
+| | | from this clock can eat the output | |
+| | | clock from Timer 0 or any other | |
+| | | clock source. | |
+| +--------------------------------+------------------------------------+ |
+| |
++----------------------------------------------------------------------------+
+| Input Parameters : BYTE_ b_BoardHandle : Handle of board |
+| APCI-1710 |
+| BYTE_ b_ModulNbr : Module number to |
+| configure (0 to 3) |
+| BYTE_ b_TimerNbr : Timer number to |
+| configure (0 to 2) |
+| BYTE_ b_TimerMode : Timer mode selection |
+| (0 to 5) |
+| 0: Interrupt on terminal|
+| count |
+| 1: Hardware |
+| retriggerable one- |
+| shot |
+| 2: Rate generator |
+| 3: Square wave mode |
+| 4: Software triggered |
+| strobe |
+| 5: Hardware triggered |
+| strobe |
+| See timer mode |
+| description table. |
+| ULONG_ ul_ReloadValue : Start counting value |
+| or division factor |
+| See timer mode |
+| description table. |
+| BYTE_ b_InputClockSelection : Selection from input |
+| timer clock. |
+| See input clock |
+| selection table. |
+| BYTE_ b_InputClockLevel : Selection from input |
+| clock level. |
+| 0 : Low active |
+| (Input inverted) |
+| 1 : High active |
+| BYTE_ b_OutputLevel, : Selection from output |
+| clock level. |
+| 0 : Low active |
+| 1 : High active |
+| (Output inverted) |
+| BYTE_ b_HardwareGateLevel : Selection from |
+| hardware gate level. |
+| 0 : Low active |
+| (Input inverted) |
+| 1 : High active |
+| If you will not used |
+| the hardware gate set |
+| this value to 0.
+|b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
+ b_TimerNbr = (BYTE) CR_CHAN(insn->chanspec);
+ b_TimerMode = (BYTE) data[0];
+ ul_ReloadValue = (ULONG) data[1];
+ b_InputClockSelection =(BYTE) data[2];
+ b_InputClockLevel =(BYTE) data[3];
+ b_OutputLevel =(BYTE) data[4];
+ b_HardwareGateLevel =(BYTE) data[5];
++----------------------------------------------------------------------------+
+| Output Parameters : - |
++----------------------------------------------------------------------------+
+| Return Value : 0: No error |
+| -1: The handle parameter of the board is wrong |
+| -2: Module selection wrong |
+| -3: Timer selection wrong |
+| -4: The module is not a TIMER module |
+| -5: Timer mode selection is wrong |
+| -6: Input timer clock selection is wrong |
+| -7: Selection from input clock level is wrong |
+| -8: Selection from output clock level is wrong |
+| -9: Selection from hardware gate level is wrong |
++----------------------------------------------------------------------------+
+*/
+
+INT i_APCI1710_InsnConfigInitTimer(struct comedi_device * dev, struct comedi_subdevice * s,
+ struct comedi_insn * insn, unsigned int * data)
+{
+
+ INT i_ReturnValue = 0;
+ BYTE b_ModulNbr;
+ BYTE b_TimerNbr;
+ BYTE b_TimerMode;
+ ULONG ul_ReloadValue;
+ BYTE b_InputClockSelection;
+ BYTE b_InputClockLevel;
+ BYTE b_OutputLevel;
+ BYTE b_HardwareGateLevel;
+
+ //BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+ DWORD dw_Test = 0;
+ //END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+
+ i_ReturnValue = insn->n;
+ b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
+ b_TimerNbr = (BYTE) CR_CHAN(insn->chanspec);
+ b_TimerMode = (BYTE) data[0];
+ ul_ReloadValue = (ULONG) data[1];
+ b_InputClockSelection = (BYTE) data[2];
+ b_InputClockLevel = (BYTE) data[3];
+ b_OutputLevel = (BYTE) data[4];
+ b_HardwareGateLevel = (BYTE) data[5];
+
+ /* Test the module number */
+ if (b_ModulNbr < 4) {
+ /* Test if 82X54 timer */
+ if ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF0000UL) == APCI1710_82X54_TIMER) {
+ /* Test the timer number */
+
+ if (b_TimerNbr <= 2) {
+ /* Test the timer mode */
+ if (b_TimerMode <= 5) {
+ //BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+ /* Test te imput clock selection */
+ /*
+ if (((b_TimerNbr == 0) && (b_InputClockSelection == 0)) ||
+ ((b_TimerNbr != 0) && ((b_InputClockSelection == 0) || (b_InputClockSelection == 1))))
+ */
+
+ if (((b_TimerNbr == 0) &&
+ (b_InputClockSelection == APCI1710_PCI_BUS_CLOCK)) ||
+ ((b_TimerNbr == 0) &&
+ (b_InputClockSelection == APCI1710_10MHZ)) ||
+ ((b_TimerNbr != 0) &&
+ ((b_InputClockSelection == APCI1710_PCI_BUS_CLOCK) ||
+ (b_InputClockSelection == APCI1710_FRONT_CONNECTOR_INPUT) ||
+ (b_InputClockSelection == APCI1710_10MHZ)))) {
+ //BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+ if (((b_InputClockSelection == APCI1710_10MHZ) &&
+ ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0x0000FFFFUL) >= 0x3131)) ||
+ (b_InputClockSelection != APCI1710_10MHZ)) {
+ //END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz
+ /* Test the input clock level selection */
+
+ if ((b_InputClockLevel == 0) ||
+ (b_InputClockLevel == 1)) {
+ /* Test the output clock level selection */
+ if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) {
+ /* Test the hardware gate level selection */
+ if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) {
+ //BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+ /* Test if version > 1.1 and clock selection = 10MHz */
+ if ((b_InputClockSelection == APCI1710_10MHZ) && ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0x0000FFFFUL) > 0x3131)) {
+ /* Test if 40MHz quartz on board */
+ dw_Test = inl(devpriv->s_BoardInfos.ui_Address + (16 + (b_TimerNbr * 4) + (64 * b_ModulNbr)));
+
+ dw_Test = (dw_Test >> 16) & 1;
+ } else {
+ dw_Test = 1;
+ }
+
+ /* Test if detection OK */
+ if (dw_Test == 1) {
+ //END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+ /* Initialisation OK */
+ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_82X54Init = 1;
+
+ /* Save the input clock selection */
+ devpriv-> s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_InputClockSelection = b_InputClockSelection;
+
+ /* Save the input clock level */
+ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_InputClockLevel = ~b_InputClockLevel & 1;
+
+ /* Save the output level */
+ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_OutputLevel = ~b_OutputLevel & 1;
+
+ /* Save the gate level */
+ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_HardwareGateLevel = b_HardwareGateLevel;
+
+ /* Set the configuration word and disable the timer */
+ //BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+ /*
+ devpriv->s_ModuleInfo [b_ModulNbr].
+ s_82X54ModuleInfo.
+ s_82X54TimerInfo [b_TimerNbr].
+ dw_ConfigurationWord = (DWORD) (((b_HardwareGateLevel << 0) & 0x1) |
+ ((b_InputClockLevel << 1) & 0x2) |
+ (((~b_OutputLevel & 1) << 2) & 0x4) |
+ ((b_InputClockSelection << 4) & 0x10));
+ */
+ /* Test if 10MHz selected */
+ if (b_InputClockSelection == APCI1710_10MHZ) {
+ b_InputClockSelection = 2;
+ }
+
+ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord = (DWORD)(((b_HardwareGateLevel << 0) & 0x1) | ((b_InputClockLevel << 1) & 0x2) | (((~b_OutputLevel & 1) << 2) & 0x4) | ((b_InputClockSelection << 4) & 0x30));
+ //END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+ outl(devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord, devpriv->s_BoardInfos.ui_Address + 32 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
+
+ /* Initialise the 82X54 Timer */
+ outl((DWORD) b_TimerMode, devpriv->s_BoardInfos.ui_Address + 16 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
+
+ /* Write the reload value */
+ outl(ul_ReloadValue, devpriv->s_BoardInfos.ui_Address + 0 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
+ //BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+ } // if (dw_Test == 1)
+ else {
+ /* Input timer clock selection is wrong */
+ i_ReturnValue = -6;
+ } // if (dw_Test == 1)
+ //END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz
+ } // if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1))
+ else {
+ /* Selection from hardware gate level is wrong */
+ DPRINTK("Selection from hardware gate level is wrong\n");
+ i_ReturnValue = -9;
+ } // if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1))
+ } // if ((b_OutputLevel == 0) || (b_OutputLevel == 1))
+ else {
+ /* Selection from output clock level is wrong */
+ DPRINTK("Selection from output clock level is wrong\n");
+ i_ReturnValue = -8;
+ } // if ((b_OutputLevel == 0) || (b_OutputLevel == 1))
+ } // if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1))
+ else {
+ /* Selection from input clock level is wrong */
+ DPRINTK("Selection from input clock level is wrong\n");
+ i_ReturnValue = -7;
+ } // if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1))
+ } else {
+ /* Input timer clock selection is wrong */
+ DPRINTK("Input timer clock selection is wrong\n");
+ i_ReturnValue = -6;
+ }
+ } else {
+ /* Input timer clock selection is wrong */
+ DPRINTK("Input timer clock selection is wrong\n");
+ i_ReturnValue = -6;
+ }
+ } // if ((b_TimerMode >= 0) && (b_TimerMode <= 5))
+ else {
+ /* Timer mode selection is wrong */
+ DPRINTK("Timer mode selection is wrong\n");
+ i_ReturnValue = -5;
+ } // if ((b_TimerMode >= 0) && (b_TimerMode <= 5))
+ } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ else {
+ /* Timer selection wrong */
+ DPRINTK("Timer selection wrong\n");
+ i_ReturnValue = -3;
+ } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ } else {
+ /* The module is not a TIMER module */
+ DPRINTK("The module is not a TIMER module\n");
+ i_ReturnValue = -4;
+ }
+ } else {
+ /* Module number error */
+ DPRINTK("Module number error\n");
+ i_ReturnValue = -2;
+ }
+
+ return (i_ReturnValue);
+}
+
+/*
++----------------------------------------------------------------------------+
+| Function Name : _INT_ i_APCI1710_EnableTimer |
+| (BYTE_ b_BoardHandle, |
+| BYTE_ b_ModulNbr, |
+| BYTE_ b_TimerNbr, |
+| BYTE_ b_InterruptEnable)
+INT i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device *dev,struct comedi_subdevice *s,
+ struct comedi_insn *insn,unsigned int *data) |
++----------------------------------------------------------------------------+
+| Task : Enable OR Disable the Timer (b_TimerNbr) from selected module |
+| (b_ModulNbr). You must calling the |
+| "i_APCI1710_InitTimer" function be for you call this |
+| function. If you enable the timer interrupt, the timer |
+| generate a interrupt after the timer value reach |
+| the zero. See function "i_APCI1710_SetBoardIntRoutineX"|
++----------------------------------------------------------------------------+
+| Input Parameters : BYTE_ b_BoardHandle : Handle of board |
+| APCI-1710 |
+| BYTE_ b_ModulNbr : Selected module number |
+| (0 to 3) |
+| BYTE_ b_TimerNbr : Timer number to enable |
+| (0 to 2) |
+| BYTE_ b_InterruptEnable : Enable or disable the |
+| timer interrupt. |
+| APCI1710_ENABLE : |
+| Enable the timer interrupt |
+| APCI1710_DISABLE : |
+| Disable the timer interrupt|
+i_ReturnValue=insn->n;
+ b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
+ b_TimerNbr = (BYTE) CR_CHAN(insn->chanspec);
+ b_ActionType = (BYTE) data[0]; // enable disable
++----------------------------------------------------------------------------+
+| Output Parameters : - |
++----------------------------------------------------------------------------+
+| Return Value : 0: No error |
+| -1: The handle parameter of the board is wrong |
+| -2: Module selection wrong |
+| -3: Timer selection wrong |
+| -4: The module is not a TIMER module |
+| -5: Timer not initialised see function |
+| "i_APCI1710_InitTimer" |
+| -6: Interrupt parameter is wrong |
+| -7: Interrupt function not initialised. |
+| See function "i_APCI1710_SetBoardIntRoutineX" |
++----------------------------------------------------------------------------+
+*/
+
+INT i_APCI1710_InsnWriteEnableDisableTimer(struct comedi_device * dev,
+ struct comedi_subdevice * s,
+ struct comedi_insn * insn, unsigned int * data)
+{
+ INT i_ReturnValue = 0;
+ DWORD dw_DummyRead;
+ BYTE b_ModulNbr;
+ BYTE b_TimerNbr;
+ BYTE b_ActionType;
+ BYTE b_InterruptEnable;
+
+ i_ReturnValue = insn->n;
+ b_ModulNbr = (BYTE) CR_AREF(insn->chanspec);
+ b_TimerNbr = (BYTE) CR_CHAN(insn->chanspec);
+ b_ActionType = (BYTE) data[0]; // enable disable
+
+ /* Test the module number */
+ if (b_ModulNbr < 4) {
+ /* Test if 82X54 timer */
+ if ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF0000UL) == APCI1710_82X54_TIMER) {
+ /* Test the timer number */
+ if (b_TimerNbr <= 2) {
+ /* Test if timer initialised */
+ if (devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_82X54Init == 1) {
+
+ switch (b_ActionType) {
+ case APCI1710_ENABLE:
+ b_InterruptEnable = (BYTE) data[1];
+ /* Test the interrupt selection */
+ if ((b_InterruptEnable == APCI1710_ENABLE) ||
+ (b_InterruptEnable == APCI1710_DISABLE)) {
+ if (b_InterruptEnable == APCI1710_ENABLE) {
+
+ dw_DummyRead = inl(devpriv->s_BoardInfos.ui_Address + 12 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
+
+ /* Enable the interrupt */
+ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord | 0x8;
+
+ outl(devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord, devpriv->s_BoardInfos.ui_Address + 32 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
+ devpriv->tsk_Current = current; // Save the current process task structure
+
+ } // if (b_InterruptEnable == APCI1710_ENABLE)
+ else {
+ /* Disable the interrupt */
+ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord & 0xF7;
+
+ outl(devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord, devpriv->s_BoardInfos.ui_Address + 32 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
+
+ /* Save the interrupt flag */
+ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.b_InterruptMask = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.b_InterruptMask & (0xFF - (1 << b_TimerNbr));
+ } // if (b_InterruptEnable == APCI1710_ENABLE)
+
+ /* Test if error occur */
+ if (i_ReturnValue >= 0) {
+ /* Save the interrupt flag */
+ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.b_InterruptMask = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.b_InterruptMask | ((1 & b_InterruptEnable) << b_TimerNbr);
+
+ /* Enable the timer */
+ outl(1, devpriv->s_BoardInfos.ui_Address + 44 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
+ }
+ } else {
+ /* Interrupt parameter is wrong */
+ DPRINTK("\n");
+ i_ReturnValue = -6;
+ }
+ break;
+ case APCI1710_DISABLE:
+ /* Test the interrupt flag */
+ if (((devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.b_InterruptMask >> b_TimerNbr) & 1) == 1) {
+ /* Disable the interrupt */
+
+ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr]. dw_ConfigurationWord = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord & 0xF7;
+
+ outl(devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord, devpriv->s_BoardInfos.ui_Address + 32 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
+
+ /* Save the interrupt flag */
+ devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.b_InterruptMask = devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.b_InterruptMask & (0xFF - (1 << b_TimerNbr));
+ }
+
+ /* Disable the timer */
+ outl(0, devpriv->s_BoardInfos.ui_Address + 44 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
+ break;
+ } // Switch end
+ } else {
+ /* Timer not initialised see function */
+ DPRINTK ("Timer not initialised see function\n");
+ i_ReturnValue = -5;
+ }
+ } else {
+ /* Timer selection wrong */
+ DPRINTK("Timer selection wrong\n");
+ i_ReturnValue = -3;
+ } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ } else {
+ /* The module is not a TIMER module */
+ DPRINTK("The module is not a TIMER module\n");
+ i_ReturnValue = -4;
+ }
+ } else {
+ /* Module number error */
+ DPRINTK("Module number error\n");
+ i_ReturnValue = -2;
+ }
+
+ return (i_ReturnValue);
+}
+
+/*
++----------------------------------------------------------------------------+
+| Function Name : _INT_ i_APCI1710_ReadAllTimerValue |
+| (BYTE_ b_BoardHandle, |
+| BYTE_ b_ModulNbr, |
+| PULONG_ pul_TimerValueArray)
+INT i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev,struct comedi_subdevice *s,
+ struct comedi_insn *insn,unsigned int *data) |
++----------------------------------------------------------------------------+
+| Task : Return the all timer values from selected timer |
+| module (b_ModulNbr). |
++----------------------------------------------------------------------------+
+| Input Parameters : BYTE_ b_BoardHandle : Handle of board |
+| APCI-1710 |
+| BYTE_ b_ModulNbr : Selected module number |
+| (0 to 3) |
++----------------------------------------------------------------------------+
+| Output Parameters : PULONG_ pul_TimerValueArray : Timer value array. |
+| Element 0 contain the timer 0 value. |
+| Element 1 contain the timer 1 value. |
+| Element 2 contain the timer 2 value. |
++----------------------------------------------------------------------------+
+| Return Value : 0: No error |
+| -1: The handle parameter of the board is wrong |
+| -2: Module selection wrong |
+| -3: The module is not a TIMER module |
+| -4: Timer 0 not initialised see function |
+| "i_APCI1710_InitTimer" |
+| -5: Timer 1 not initialised see function |
+| "i_APCI1710_InitTimer" |
+| -6: Timer 2 not initialised see function |
+| "i_APCI1710_InitTimer" |
++----------------------------------------------------------------------------+
+*/
+
+INT i_APCI1710_InsnReadAllTimerValue(struct comedi_device *dev, struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
+{
+ INT i_ReturnValue = 0;
+ BYTE b_ModulNbr, b_ReadType;
+ PULONG pul_TimerValueArray;
+
+ b_ModulNbr = CR_AREF(insn->chanspec);
+ b_ReadType = CR_CHAN(insn->chanspec);
+ pul_TimerValueArray = (PULONG) data;
+ i_ReturnValue = insn->n;
+
+ switch (b_ReadType) {
+ case APCI1710_TIMER_READINTERRUPT:
+
+ data[0] = devpriv->s_InterruptParameters.s_FIFOInterruptParameters[devpriv->s_InterruptParameters.ui_Read].b_OldModuleMask;
+ data[1] = devpriv->s_InterruptParameters.s_FIFOInterruptParameters[devpriv->s_InterruptParameters.ui_Read].ul_OldInterruptMask;
+ data[2] = devpriv->s_InterruptParameters.s_FIFOInterruptParameters[devpriv->s_InterruptParameters.ui_Read].ul_OldCounterLatchValue;
+
+ /* Increment the read FIFO */
+ devpriv->s_InterruptParameters.ui_Read = (devpriv->s_InterruptParameters.ui_Read + 1) % APCI1710_SAVE_INTERRUPT;
+
+ break;
+
+ case APCI1710_TIMER_READALLTIMER:
+ /* Test the module number */
+ if (b_ModulNbr < 4) {
+ /* Test if 82X54 timer */
+ if ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF0000UL) == APCI1710_82X54_TIMER) {
+ /* Test if timer 0 iniutialised */
+ if (devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[0].b_82X54Init == 1) {
+ /* Test if timer 1 iniutialised */
+ if (devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[1].b_82X54Init == 1) {
+ /* Test if timer 2 iniutialised */
+ if (devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[2].b_82X54Init == 1) {
+ /* Latch all counter */
+ outl(0x17, devpriv->s_BoardInfos.ui_Address + 12 + (64 * b_ModulNbr));
+
+ /* Read the timer 0 value */
+ pul_TimerValueArray[0] = inl(devpriv->s_BoardInfos.ui_Address + 0 + (64 * b_ModulNbr));
+
+ /* Read the timer 1 value */
+ pul_TimerValueArray[1] = inl(devpriv->s_BoardInfos.ui_Address + 4 + (64 * b_ModulNbr));
+
+ /* Read the timer 2 value */
+ pul_TimerValueArray[2] = inl(devpriv->s_BoardInfos.ui_Address + 8 + (64 * b_ModulNbr));
+ } else {
+ /* Timer 2 not initialised see function */
+ DPRINTK("Timer 2 not initialised see function\n");
+ i_ReturnValue = -6;
+ }
+ } else {
+ /* Timer 1 not initialised see function */
+ DPRINTK("Timer 1 not initialised see function\n");
+ i_ReturnValue = -5;
+ }
+ } else {
+ /* Timer 0 not initialised see function */
+ DPRINTK("Timer 0 not initialised see function\n");
+ i_ReturnValue = -4;
+ }
+ } else {
+ /* The module is not a TIMER module */
+ DPRINTK("The module is not a TIMER module\n");
+ i_ReturnValue = -3;
+ }
+ } else {
+ /* Module number error */
+ DPRINTK("Module number error\n");
+ i_ReturnValue = -2;
+ }
+
+ } // End of Switch
+ return (i_ReturnValue);
+}
+
+/*
++----------------------------------------------------------------------------+
+| Function Name :INT i_APCI1710_InsnBitsTimer(struct comedi_device *dev,
+struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
++----------------------------------------------------------------------------+
+| Task : Read write functions for Timer |
++----------------------------------------------------------------------------+
+| Input Parameters :
++----------------------------------------------------------------------------+
+| Output Parameters : - |
++----------------------------------------------------------------------------+
+| Return Value :
++----------------------------------------------------------------------------+
+*/
+
+INT i_APCI1710_InsnBitsTimer(struct comedi_device * dev, struct comedi_subdevice * s,
+ struct comedi_insn * insn, unsigned int * data)
+{
+ BYTE b_BitsType;
+ INT i_ReturnValue = 0;
+ b_BitsType = data[0];
+
+ printk("\n82X54");
+
+ switch (b_BitsType) {
+ case APCI1710_TIMER_READVALUE:
+ i_ReturnValue = i_APCI1710_ReadTimerValue(dev,
+ (BYTE)CR_AREF(insn->chanspec),
+ (BYTE)CR_CHAN(insn->chanspec),
+ (PULONG) & data[0]);
+ break;
+
+ case APCI1710_TIMER_GETOUTPUTLEVEL:
+ i_ReturnValue = i_APCI1710_GetTimerOutputLevel(dev,
+ (BYTE)CR_AREF(insn->chanspec),
+ (BYTE)CR_CHAN(insn->chanspec),
+ (PBYTE) &data[0]);
+ break;
+
+ case APCI1710_TIMER_GETPROGRESSSTATUS:
+ i_ReturnValue = i_APCI1710_GetTimerProgressStatus(dev,
+ (BYTE)CR_AREF(insn->chanspec),
+ (BYTE)CR_CHAN(insn->chanspec),
+ (PBYTE)&data[0]);
+ break;
+
+ case APCI1710_TIMER_WRITEVALUE:
+ i_ReturnValue = i_APCI1710_WriteTimerValue(dev,
+ (BYTE)CR_AREF(insn->chanspec),
+ (BYTE)CR_CHAN(insn->chanspec),
+ (ULONG)data[1]);
+
+ break;
+
+ default:
+ printk("Bits Config Parameter Wrong\n");
+ i_ReturnValue = -1;
+ }
+
+ if (i_ReturnValue >= 0)
+ i_ReturnValue = insn->n;
+ return (i_ReturnValue);
+}
+
+/*
++----------------------------------------------------------------------------+
+| Function Name : _INT_ i_APCI1710_ReadTimerValue |
+| (BYTE_ b_BoardHandle, |
+| BYTE_ b_ModulNbr, |
+| BYTE_ b_TimerNbr, |
+| PULONG_ pul_TimerValue) |
++----------------------------------------------------------------------------+
+| Task : Return the timer value from selected digital timer |
+| (b_TimerNbr) from selected timer module (b_ModulNbr). |
++----------------------------------------------------------------------------+
+| Input Parameters : BYTE_ b_BoardHandle : Handle of board |
+| APCI-1710 |
+| BYTE_ b_ModulNbr : Selected module number |
+| (0 to 3) |
+| BYTE_ b_TimerNbr : Timer number to read |
+| (0 to 2) |
++----------------------------------------------------------------------------+
+| Output Parameters : PULONG_ pul_TimerValue : Timer value |
++----------------------------------------------------------------------------+
+| Return Value : 0: No error |
+| -1: The handle parameter of the board is wrong |
+| -2: Module selection wrong |
+| -3: Timer selection wrong |
+| -4: The module is not a TIMER module |
+| -5: Timer not initialised see function |
+| "i_APCI1710_InitTimer" |
++----------------------------------------------------------------------------+
+*/
+
+INT i_APCI1710_ReadTimerValue(struct comedi_device * dev,
+ BYTE b_ModulNbr, BYTE b_TimerNbr,
+ PULONG pul_TimerValue)
+{
+ INT i_ReturnValue = 0;
+
+ /* Test the module number */
+ if (b_ModulNbr < 4) {
+ /* Test if 82X54 timer */
+ if ((devpriv->s_BoardInfos.
+ dw_MolduleConfiguration[b_ModulNbr] &
+ 0xFFFF0000UL) == APCI1710_82X54_TIMER) {
+ /* Test the timer number */
+ if (b_TimerNbr <= 2) {
+ /* Test if timer initialised */
+ if (devpriv->
+ s_ModuleInfo[b_ModulNbr].
+ s_82X54ModuleInfo.
+ s_82X54TimerInfo[b_TimerNbr].
+ b_82X54Init == 1) {
+ /* Latch the timer value */
+ outl((2 << b_TimerNbr) | 0xD0,
+ devpriv->s_BoardInfos.
+ ui_Address + 12 +
+ (64 * b_ModulNbr));
+
+ /* Read the counter value */
+ *pul_TimerValue =
+ inl(devpriv->s_BoardInfos.
+ ui_Address + (b_TimerNbr * 4) +
+ (64 * b_ModulNbr));
+ } else {
+ /* Timer not initialised see function */
+ DPRINTK("Timer not initialised see function\n");
+ i_ReturnValue = -5;
+ }
+ } else {
+ /* Timer selection wrong */
+ DPRINTK("Timer selection wrong\n");
+ i_ReturnValue = -3;
+ } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ } else {
+ /* The module is not a TIMER module */
+ DPRINTK("The module is not a TIMER module\n");
+ i_ReturnValue = -4;
+ }
+ } else {
+ /* Module number error */
+ DPRINTK("Module number error\n");
+ i_ReturnValue = -2;
+ }
+
+ return (i_ReturnValue);
+}
+
+ /*
+ +----------------------------------------------------------------------------+
+ | Function Name : _INT_ i_APCI1710_GetTimerOutputLevel |
+ | (BYTE_ b_BoardHandle, |
+ | BYTE_ b_ModulNbr, |
+ | BYTE_ b_TimerNbr, |
+ | PBYTE_ pb_OutputLevel) |
+ +----------------------------------------------------------------------------+
+ | Task : Return the output signal level (pb_OutputLevel) from |
+ | selected digital timer (b_TimerNbr) from selected timer|
+ | module (b_ModulNbr). |
+ +----------------------------------------------------------------------------+
+ | Input Parameters : BYTE_ b_BoardHandle : Handle of board |
+ | APCI-1710 |
+ | BYTE_ b_ModulNbr : Selected module number |
+ | (0 to 3) |
+ | BYTE_ b_TimerNbr : Timer number to test |
+ | (0 to 2) |
+ +----------------------------------------------------------------------------+
+ | Output Parameters : PBYTE_ pb_OutputLevel : Output signal level |
+ | 0 : The output is low |
+ | 1 : The output is high |
+ +----------------------------------------------------------------------------+
+ | Return Value : 0: No error |
+ | -1: The handle parameter of the board is wrong |
+ | -2: Module selection wrong |
+ | -3: Timer selection wrong |
+ | -4: The module is not a TIMER module |
+ | -5: Timer not initialised see function |
+ | "i_APCI1710_InitTimer" |
+ +----------------------------------------------------------------------------+
+ */
+
+INT i_APCI1710_GetTimerOutputLevel(struct comedi_device * dev,
+ BYTE b_ModulNbr, BYTE b_TimerNbr,
+ PBYTE pb_OutputLevel)
+{
+ INT i_ReturnValue = 0;
+ DWORD dw_TimerStatus;
+
+ /* Test the module number */
+ if (b_ModulNbr < 4) {
+ /* Test if 82X54 timer */
+ if ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF0000UL) == APCI1710_82X54_TIMER) {
+ /* Test the timer number */
+ if (b_TimerNbr <= 2) {
+ /* Test if timer initialised */
+ if (devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_82X54Init == 1) {
+ /* Latch the timer value */
+ outl((2 << b_TimerNbr) | 0xE0, devpriv->s_BoardInfos.ui_Address + 12 + (64 * b_ModulNbr));
+
+ /* Read the timer status */
+ dw_TimerStatus = inl(devpriv->s_BoardInfos.ui_Address + 16 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
+
+ *pb_OutputLevel = (BYTE) (((dw_TimerStatus >> 7) & 1) ^ devpriv-> s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_OutputLevel);
+ } else {
+ /* Timer not initialised see function */
+ DPRINTK("Timer not initialised see function\n");
+ i_ReturnValue = -5;
+ }
+ } else {
+ /* Timer selection wrong */
+ DPRINTK("Timer selection wrong\n");
+ i_ReturnValue = -3;
+ } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ } else {
+ /* The module is not a TIMER module */
+ DPRINTK("The module is not a TIMER module\n");
+ i_ReturnValue = -4;
+ }
+ } else {
+ /* Module number error */
+ DPRINTK("Module number error\n");
+ i_ReturnValue = -2;
+ }
+
+ return (i_ReturnValue);
+}
+
+/*
++----------------------------------------------------------------------------+
+| Function Name : _INT_ i_APCI1710_GetTimerProgressStatus |
+| (BYTE_ b_BoardHandle, |
+| BYTE_ b_ModulNbr, |
+| BYTE_ b_TimerNbr, |
+| PBYTE_ pb_TimerStatus) |
++----------------------------------------------------------------------------+
+| Task : Return the progress status (pb_TimerStatus) from |
+| selected digital timer (b_TimerNbr) from selected timer|
+| module (b_ModulNbr). |
++----------------------------------------------------------------------------+
+| Input Parameters : BYTE_ b_BoardHandle : Handle of board |
+| APCI-1710 |
+| BYTE_ b_ModulNbr : Selected module number |
+| (0 to 3) |
+| BYTE_ b_TimerNbr : Timer number to test |
+| (0 to 2) |
++----------------------------------------------------------------------------+
+| Output Parameters : PBYTE_ pb_TimerStatus : Output signal level |
+| 0 : Timer not in progress |
+| 1 : Timer in progress |
++----------------------------------------------------------------------------+
+| Return Value : 0: No error |
+| -1: The handle parameter of the board is wrong |
+| -2: Module selection wrong |
+| -3: Timer selection wrong |
+| -4: The module is not a TIMER module |
+| -5: Timer not initialised see function |
+| "i_APCI1710_InitTimer" |
++----------------------------------------------------------------------------+
+*/
+
+INT i_APCI1710_GetTimerProgressStatus(struct comedi_device *dev,
+ BYTE b_ModulNbr, BYTE b_TimerNbr,
+ PBYTE pb_TimerStatus)
+{
+ INT i_ReturnValue = 0;
+ DWORD dw_TimerStatus;
+
+ /* Test the module number */
+ if (b_ModulNbr < 4) {
+ /* Test if 82X54 timer */
+
+ if ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF0000UL) == APCI1710_82X54_TIMER) {
+ /* Test the timer number */
+ if (b_TimerNbr <= 2) {
+ /* Test if timer initialised */
+ if (devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_82X54Init == 1) {
+ /* Latch the timer value */
+ outl((2 << b_TimerNbr) | 0xE0, devpriv->s_BoardInfos.ui_Address + 12 + (64 * b_ModulNbr));
+
+ /* Read the timer status */
+ dw_TimerStatus = inl(devpriv->s_BoardInfos.ui_Address + 16 + (b_TimerNbr * 4) + (64 * b_ModulNbr));
+
+ *pb_TimerStatus = (BYTE) ((dw_TimerStatus) >> 8) & 1;
+ printk("ProgressStatus : %d", *pb_TimerStatus);
+ } else {
+ /* Timer not initialised see function */
+ i_ReturnValue = -5;
+ }
+ } else {
+ /* Timer selection wrong */
+ i_ReturnValue = -3;
+ } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ } else {
+ /* The module is not a TIMER module */
+
+ i_ReturnValue = -4;
+ }
+ } else {
+ /* Module number error */
+
+ i_ReturnValue = -2;
+ }
+
+ return i_ReturnValue;
+}
+
+/*
++----------------------------------------------------------------------------+
+| Function Name : _INT_ i_APCI1710_WriteTimerValue |
+| (BYTE_ b_BoardHandle, |
+| BYTE_ b_ModulNbr, |
+| BYTE_ b_TimerNbr, |
+| ULONG_ ul_WriteValue) |
++----------------------------------------------------------------------------+
+| Task : Write the value (ul_WriteValue) into the selected timer|
+| (b_TimerNbr) from selected timer module (b_ModulNbr). |
+| The action in depend of the time mode selection. |
+| See timer mode description table. |
++----------------------------------------------------------------------------+
+| Input Parameters : BYTE_ b_BoardHandle : Handle of board |
+| APCI-1710 |
+| BYTE_ b_ModulNbr : Selected module number |
+| (0 to 3) |
+| BYTE_ b_TimerNbr : Timer number to write |
+| (0 to 2) |
+| ULONG_ ul_WriteValue : Value to write |
++----------------------------------------------------------------------------+
+| Output Parameters : - |
++----------------------------------------------------------------------------+
+| Return Value : 0: No error |
+| -1: The handle parameter of the board is wrong |
+| -2: Module selection wrong |
+| -3: Timer selection wrong |
+| -4: The module is not a TIMER module |
+| -5: Timer not initialised see function |
+| "i_APCI1710_InitTimer" |
++----------------------------------------------------------------------------+
+*/
+
+INT i_APCI1710_WriteTimerValue(struct comedi_device * dev,
+ BYTE b_ModulNbr, BYTE b_TimerNbr,
+ ULONG ul_WriteValue)
+{
+ INT i_ReturnValue = 0;
+
+ /* Test the module number */
+ if (b_ModulNbr < 4) {
+ /* Test if 82X54 timer */
+ if ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF0000UL) == APCI1710_82X54_TIMER) {
+ /* Test the timer number */
+ if (b_TimerNbr <= 2) {
+ /* Test if timer initialised */
+ if (devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].b_82X54Init == 1) {
+ /* Write the value */
+ outl(ul_WriteValue, devpriv->s_BoardInfos.ui_Address + (b_TimerNbr * 4) + (64 * b_ModulNbr));
+ } else {
+ /* Timer not initialised see function */
+ DPRINTK("Timer not initialised see function\n");
+ i_ReturnValue = -5;
+ }
+ } else {
+ /* Timer selection wrong */
+ DPRINTK("Timer selection wrong\n");
+ i_ReturnValue = -3;
+ } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2))
+ } else {
+ /* The module is not a TIMER module */
+ DPRINTK("The module is not a TIMER module\n");
+ i_ReturnValue = -4;
+ }
+ } else {
+ /* Module number error */
+ DPRINTK("Module number error\n");
+ i_ReturnValue = -2;
+ }
+
+ return i_ReturnValue;
+}
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.