diff options
Diffstat (limited to 'drivers/staging/comedi/drivers/das08_cs.c')
| -rw-r--r-- | drivers/staging/comedi/drivers/das08_cs.c | 129 |
1 files changed, 8 insertions, 121 deletions
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index 48d9fb1227df..0b32a2df7768 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -48,7 +48,6 @@ Command support does not exist, but could be added for this board. #include "das08.h" /* pcmcia includes */ -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -115,40 +114,15 @@ static void das08_pcmcia_release(struct pcmcia_device *link); static int das08_pcmcia_suspend(struct pcmcia_device *p_dev); static int das08_pcmcia_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int das08_pcmcia_attach(struct pcmcia_device *); static void das08_pcmcia_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - das08_pcmcia_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int das08_pcmcia_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -162,16 +136,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - cur_dev = link; das08_pcmcia_config(link); @@ -179,15 +143,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) return 0; } /* das08_pcmcia_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void das08_pcmcia_detach(struct pcmcia_device *link) { @@ -203,46 +158,13 @@ static void das08_pcmcia_detach(struct pcmcia_device *link) static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev); - } - return 0; -} - - -/*====================================================================== - - das08_pcmcia_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. + if (p_dev->config_index == 0) + return -EINVAL; -======================================================================*/ + return pcmcia_request_io(p_dev); +} static void das08_pcmcia_config(struct pcmcia_device *link) { @@ -250,6 +172,8 @@ static void das08_pcmcia_config(struct pcmcia_device *link) dev_dbg(&link->dev, "das08_pcmcia_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, das08_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -259,25 +183,10 @@ static void das08_pcmcia_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -285,32 +194,12 @@ failed: } /* das08_pcmcia_config */ -/*====================================================================== - - After a card is removed, das08_pcmcia_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void das08_pcmcia_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "das08_pcmcia_release\n"); pcmcia_disable_device(link); } /* das08_pcmcia_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int das08_pcmcia_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -348,9 +237,7 @@ struct pcmcia_driver das08_cs_driver = { .resume = das08_pcmcia_resume, .id_table = das08_cs_id_table, .owner = THIS_MODULE, - .drv = { - .name = "pcm-das08", - }, + .name = "pcm-das08", }; static int __init init_das08_pcmcia_cs(void) |