aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/comedi/drivers/mpc624.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/comedi/drivers/mpc624.c')
-rw-r--r--drivers/staging/comedi/drivers/mpc624.c411
1 files changed, 187 insertions, 224 deletions
diff --git a/drivers/staging/comedi/drivers/mpc624.c b/drivers/staging/comedi/drivers/mpc624.c
index 0207b8edfcb4..826e4399c87e 100644
--- a/drivers/staging/comedi/drivers/mpc624.c
+++ b/drivers/staging/comedi/drivers/mpc624.c
@@ -1,55 +1,56 @@
/*
- comedi/drivers/mpc624.c
- Hardware driver for a Micro/sys inc. MPC-624 PC/104 board
-
- COMEDI - Linux Control and Measurement Device Interface
- Copyright (C) 2000 David A. Schleef <ds@schleef.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-*/
+ * mpc624.c
+ * Hardware driver for a Micro/sys inc. MPC-624 PC/104 board
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
/*
-Driver: mpc624
-Description: Micro/sys MPC-624 PC/104 board
-Devices: [Micro/sys] MPC-624 (mpc624)
-Author: Stanislaw Raczynski <sraczynski@op.pl>
-Updated: Thu, 15 Sep 2005 12:01:18 +0200
-Status: working
-
- The Micro/sys MPC-624 board is based on the LTC2440 24-bit sigma-delta
- ADC chip.
-
- Subdevices supported by the driver:
- - Analog In: supported
- - Digital I/O: not supported
- - LEDs: not supported
- - EEPROM: not supported
-
-Configuration Options:
- [0] - I/O base address
- [1] - conversion rate
- Conversion rate RMS noise Effective Number Of Bits
- 0 3.52kHz 23uV 17
- 1 1.76kHz 3.5uV 20
- 2 880Hz 2uV 21.3
- 3 440Hz 1.4uV 21.8
- 4 220Hz 1uV 22.4
- 5 110Hz 750uV 22.9
- 6 55Hz 510nV 23.4
- 7 27.5Hz 375nV 24
- 8 13.75Hz 250nV 24.4
- 9 6.875Hz 200nV 24.6
- [2] - voltage range
- 0 -1.01V .. +1.01V
- 1 -10.1V .. +10.1V
-*/
+ * Driver: mpc624
+ * Description: Micro/sys MPC-624 PC/104 board
+ * Devices: [Micro/sys] MPC-624 (mpc624)
+ * Author: Stanislaw Raczynski <sraczynski@op.pl>
+ * Updated: Thu, 15 Sep 2005 12:01:18 +0200
+ * Status: working
+ *
+ * The Micro/sys MPC-624 board is based on the LTC2440 24-bit sigma-delta
+ * ADC chip.
+ *
+ * Subdevices supported by the driver:
+ * - Analog In: supported
+ * - Digital I/O: not supported
+ * - LEDs: not supported
+ * - EEPROM: not supported
+ *
+ * Configuration Options:
+ * [0] - I/O base address
+ * [1] - conversion rate
+ * Conversion rate RMS noise Effective Number Of Bits
+ * 0 3.52kHz 23uV 17
+ * 1 1.76kHz 3.5uV 20
+ * 2 880Hz 2uV 21.3
+ * 3 440Hz 1.4uV 21.8
+ * 4 220Hz 1uV 22.4
+ * 5 110Hz 750uV 22.9
+ * 6 55Hz 510nV 23.4
+ * 7 27.5Hz 375nV 24
+ * 8 13.75Hz 250nV 24.4
+ * 9 6.875Hz 200nV 24.6
+ * [2] - voltage range
+ * 0 -1.01V .. +1.01V
+ * 1 -10.1V .. +10.1V
+ */
#include <linux/module.h>
#include "../comedidev.h"
@@ -58,65 +59,41 @@ Configuration Options:
/* Offsets of different ports */
#define MPC624_MASTER_CONTROL 0 /* not used */
-#define MPC624_GNMUXCH 1 /* Gain, Mux, Channel of ADC */
-#define MPC624_ADC 2 /* read/write to/from ADC */
-#define MPC624_EE 3 /* read/write to/from serial EEPROM via I2C */
-#define MPC624_LEDS 4 /* write to LEDs */
-#define MPC624_DIO 5 /* read/write to/from digital I/O ports */
-#define MPC624_IRQ_MASK 6 /* IRQ masking enable/disable */
+#define MPC624_GNMUXCH 1 /* Gain, Mux, Channel of ADC */
+#define MPC624_ADC 2 /* read/write to/from ADC */
+#define MPC624_EE 3 /* read/write to/from serial EEPROM via I2C */
+#define MPC624_LEDS 4 /* write to LEDs */
+#define MPC624_DIO 5 /* read/write to/from digital I/O ports */
+#define MPC624_IRQ_MASK 6 /* IRQ masking enable/disable */
/* Register bits' names */
-#define MPC624_ADBUSY (1<<5)
-#define MPC624_ADSDO (1<<4)
-#define MPC624_ADFO (1<<3)
-#define MPC624_ADCS (1<<2)
-#define MPC624_ADSCK (1<<1)
-#define MPC624_ADSDI (1<<0)
-
-/* SDI Speed/Resolution Programming bits */
-#define MPC624_OSR4 (1<<31)
-#define MPC624_OSR3 (1<<30)
-#define MPC624_OSR2 (1<<29)
-#define MPC624_OSR1 (1<<28)
-#define MPC624_OSR0 (1<<27)
+#define MPC624_ADBUSY BIT(5)
+#define MPC624_ADSDO BIT(4)
+#define MPC624_ADFO BIT(3)
+#define MPC624_ADCS BIT(2)
+#define MPC624_ADSCK BIT(1)
+#define MPC624_ADSDI BIT(0)
/* 32-bit output value bits' names */
-#define MPC624_EOC_BIT (1<<31)
-#define MPC624_DMY_BIT (1<<30)
-#define MPC624_SGN_BIT (1<<29)
-
-/* Conversion speeds */
-/* OSR4 OSR3 OSR2 OSR1 OSR0 Conversion rate RMS noise ENOB^
- * X 0 0 0 1 3.52kHz 23uV 17
- * X 0 0 1 0 1.76kHz 3.5uV 20
- * X 0 0 1 1 880Hz 2uV 21.3
- * X 0 1 0 0 440Hz 1.4uV 21.8
- * X 0 1 0 1 220Hz 1uV 22.4
- * X 0 1 1 0 110Hz 750uV 22.9
- * X 0 1 1 1 55Hz 510nV 23.4
- * X 1 0 0 0 27.5Hz 375nV 24
- * X 1 0 0 1 13.75Hz 250nV 24.4
- * X 1 1 1 1 6.875Hz 200nV 24.6
- *
- * ^ - Effective Number Of Bits
- */
+#define MPC624_EOC_BIT BIT(31)
+#define MPC624_DMY_BIT BIT(30)
+#define MPC624_SGN_BIT BIT(29)
+
+/* SDI Speed/Resolution Programming bits */
+#define MPC624_OSR(x) (((x) & 0x1f) << 27)
+#define MPC624_SPEED_3_52_KHZ MPC624_OSR(0x11)
+#define MPC624_SPEED_1_76_KHZ MPC624_OSR(0x12)
+#define MPC624_SPEED_880_HZ MPC624_OSR(0x13)
+#define MPC624_SPEED_440_HZ MPC624_OSR(0x14)
+#define MPC624_SPEED_220_HZ MPC624_OSR(0x15)
+#define MPC624_SPEED_110_HZ MPC624_OSR(0x16)
+#define MPC624_SPEED_55_HZ MPC624_OSR(0x17)
+#define MPC624_SPEED_27_5_HZ MPC624_OSR(0x18)
+#define MPC624_SPEED_13_75_HZ MPC624_OSR(0x19)
+#define MPC624_SPEED_6_875_HZ MPC624_OSR(0x1f)
-#define MPC624_SPEED_3_52_kHz (MPC624_OSR4 | MPC624_OSR0)
-#define MPC624_SPEED_1_76_kHz (MPC624_OSR4 | MPC624_OSR1)
-#define MPC624_SPEED_880_Hz (MPC624_OSR4 | MPC624_OSR1 | MPC624_OSR0)
-#define MPC624_SPEED_440_Hz (MPC624_OSR4 | MPC624_OSR2)
-#define MPC624_SPEED_220_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR0)
-#define MPC624_SPEED_110_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1)
-#define MPC624_SPEED_55_Hz \
- (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
-#define MPC624_SPEED_27_5_Hz (MPC624_OSR4 | MPC624_OSR3)
-#define MPC624_SPEED_13_75_Hz (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR0)
-#define MPC624_SPEED_6_875_Hz \
- (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
-/* -------------------------------------------------------------------------- */
struct mpc624_private {
- /* set by mpc624_attach() from driver's parameters */
- unsigned long int ulConvertionRate;
+ unsigned int ai_speed;
};
/* -------------------------------------------------------------------------- */
@@ -138,6 +115,85 @@ static const struct comedi_lrange range_mpc624_bipolar10 = {
}
};
+static unsigned int mpc624_ai_get_sample(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ struct mpc624_private *devpriv = dev->private;
+ unsigned int data_out = devpriv->ai_speed;
+ unsigned int data_in = 0;
+ unsigned int bit;
+ int i;
+
+ /* Start reading data */
+ udelay(1);
+ for (i = 0; i < 32; i++) {
+ /* Set the clock low */
+ outb(0, dev->iobase + MPC624_ADC);
+ udelay(1);
+
+ /* Set the ADSDI line for the next bit (send to MPC624) */
+ bit = (data_out & BIT(31)) ? MPC624_ADSDI : 0;
+ outb(bit, dev->iobase + MPC624_ADC);
+ udelay(1);
+
+ /* Set the clock high */
+ outb(MPC624_ADSCK | bit, dev->iobase + MPC624_ADC);
+ udelay(1);
+
+ /* Read ADSDO on high clock (receive from MPC624) */
+ data_in <<= 1;
+ data_in |= (inb(dev->iobase + MPC624_ADC) & MPC624_ADSDO) >> 4;
+ udelay(1);
+
+ data_out <<= 1;
+ }
+
+ /*
+ * Received 32-bit long value consist of:
+ * 31: EOC - (End Of Transmission) bit - should be 0
+ * 30: DMY - (Dummy) bit - should be 0
+ * 29: SIG - (Sign) bit - 1 if positive, 0 if negative
+ * 28: MSB - (Most Significant Bit) - the first bit of the
+ * conversion result
+ * ....
+ * 05: LSB - (Least Significant Bit)- the last bit of the
+ * conversion result
+ * 04-00: sub-LSB - sub-LSBs are basically noise, but when
+ * averaged properly, they can increase
+ * conversion precision up to 29 bits;
+ * they can be discarded without loss of
+ * resolution.
+ */
+ if (data_in & MPC624_EOC_BIT)
+ dev_dbg(dev->class_dev, "EOC bit is set!");
+ if (data_in & MPC624_DMY_BIT)
+ dev_dbg(dev->class_dev, "DMY bit is set!");
+
+ if (data_in & MPC624_SGN_BIT) {
+ /*
+ * Voltage is positive
+ *
+ * comedi operates on unsigned numbers, so mask off EOC
+ * and DMY and don't clear the SGN bit
+ */
+ data_in &= 0x3fffffff;
+ } else {
+ /*
+ * The voltage is negative
+ *
+ * data_in contains a number in 30-bit two's complement
+ * code and we must deal with it
+ */
+ data_in |= MPC624_SGN_BIT;
+ data_in = ~data_in;
+ data_in += 1;
+ /* clear EOC and DMY bits */
+ data_in &= ~(MPC624_EOC_BIT | MPC624_DMY_BIT);
+ data_in = 0x20000000 - data_in;
+ }
+ return data_in;
+}
+
static int mpc624_ai_eoc(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
@@ -151,14 +207,13 @@ static int mpc624_ai_eoc(struct comedi_device *dev,
return -EBUSY;
}
-static int mpc624_ai_rinsn(struct comedi_device *dev,
- struct comedi_subdevice *s, struct comedi_insn *insn,
- unsigned int *data)
+static int mpc624_ai_insn_read(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- struct mpc624_private *devpriv = dev->private;
- int n, i;
- unsigned long int data_in, data_out;
int ret;
+ int i;
/*
* WARNING:
@@ -166,7 +221,7 @@ static int mpc624_ai_rinsn(struct comedi_device *dev,
*/
outb(insn->chanspec, dev->iobase + MPC624_GNMUXCH);
- for (n = 0; n < insn->n; n++) {
+ for (i = 0; i < insn->n; i++) {
/* Trigger the conversion */
outb(MPC624_ADSCK, dev->iobase + MPC624_ADC);
udelay(1);
@@ -180,93 +235,10 @@ static int mpc624_ai_rinsn(struct comedi_device *dev,
if (ret)
return ret;
- /* Start reading data */
- data_in = 0;
- data_out = devpriv->ulConvertionRate;
- udelay(1);
- for (i = 0; i < 32; i++) {
- /* Set the clock low */
- outb(0, dev->iobase + MPC624_ADC);
- udelay(1);
-
- if (data_out & (1 << 31)) { /* the next bit is a 1 */
- /* Set the ADSDI line (send to MPC624) */
- outb(MPC624_ADSDI, dev->iobase + MPC624_ADC);
- udelay(1);
- /* Set the clock high */
- outb(MPC624_ADSCK | MPC624_ADSDI,
- dev->iobase + MPC624_ADC);
- } else { /* the next bit is a 0 */
-
- /* Set the ADSDI line (send to MPC624) */
- outb(0, dev->iobase + MPC624_ADC);
- udelay(1);
- /* Set the clock high */
- outb(MPC624_ADSCK, dev->iobase + MPC624_ADC);
- }
- /* Read ADSDO on high clock (receive from MPC624) */
- udelay(1);
- data_in <<= 1;
- data_in |=
- (inb(dev->iobase + MPC624_ADC) & MPC624_ADSDO) >> 4;
- udelay(1);
-
- data_out <<= 1;
- }
-
- /*
- * Received 32-bit long value consist of:
- * 31: EOC -
- * (End Of Transmission) bit - should be 0
- * 30: DMY
- * (Dummy) bit - should be 0
- * 29: SIG
- * (Sign) bit- 1 if the voltage is positive,
- * 0 if negative
- * 28: MSB
- * (Most Significant Bit) - the first bit of
- * the conversion result
- * ....
- * 05: LSB
- * (Least Significant Bit)- the last bit of the
- * conversion result
- * 04-00: sub-LSB
- * - sub-LSBs are basically noise, but when
- * averaged properly, they can increase conversion
- * precision up to 29 bits; they can be discarded
- * without loss of resolution.
- */
-
- if (data_in & MPC624_EOC_BIT)
- dev_dbg(dev->class_dev,
- "EOC bit is set (data_in=%lu)!", data_in);
- if (data_in & MPC624_DMY_BIT)
- dev_dbg(dev->class_dev,
- "DMY bit is set (data_in=%lu)!", data_in);
- if (data_in & MPC624_SGN_BIT) { /* Volatge is positive */
- /*
- * comedi operates on unsigned numbers, so mask off EOC
- * and DMY and don't clear the SGN bit
- */
- data_in &= 0x3FFFFFFF;
- data[n] = data_in;
- } else { /* The voltage is negative */
- /*
- * data_in contains a number in 30-bit two's complement
- * code and we must deal with it
- */
- data_in |= MPC624_SGN_BIT;
- data_in = ~data_in;
- data_in += 1;
- data_in &= ~(MPC624_EOC_BIT | MPC624_DMY_BIT);
- /* clear EOC and DMY bits */
- data_in = 0x20000000 - data_in;
- data[n] = data_in;
- }
+ data[i] = mpc624_ai_get_sample(dev, s);
}
- /* Return the number of samples read/written */
- return n;
+ return insn->n;
}
static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
@@ -285,61 +257,52 @@ static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
switch (it->options[1]) {
case 0:
- devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
+ devpriv->ai_speed = MPC624_SPEED_3_52_KHZ;
break;
case 1:
- devpriv->ulConvertionRate = MPC624_SPEED_1_76_kHz;
+ devpriv->ai_speed = MPC624_SPEED_1_76_KHZ;
break;
case 2:
- devpriv->ulConvertionRate = MPC624_SPEED_880_Hz;
+ devpriv->ai_speed = MPC624_SPEED_880_HZ;
break;
case 3:
- devpriv->ulConvertionRate = MPC624_SPEED_440_Hz;
+ devpriv->ai_speed = MPC624_SPEED_440_HZ;
break;
case 4:
- devpriv->ulConvertionRate = MPC624_SPEED_220_Hz;
+ devpriv->ai_speed = MPC624_SPEED_220_HZ;
break;
case 5:
- devpriv->ulConvertionRate = MPC624_SPEED_110_Hz;
+ devpriv->ai_speed = MPC624_SPEED_110_HZ;
break;
case 6:
- devpriv->ulConvertionRate = MPC624_SPEED_55_Hz;
+ devpriv->ai_speed = MPC624_SPEED_55_HZ;
break;
case 7:
- devpriv->ulConvertionRate = MPC624_SPEED_27_5_Hz;
+ devpriv->ai_speed = MPC624_SPEED_27_5_HZ;
break;
case 8:
- devpriv->ulConvertionRate = MPC624_SPEED_13_75_Hz;
+ devpriv->ai_speed = MPC624_SPEED_13_75_HZ;
break;
case 9:
- devpriv->ulConvertionRate = MPC624_SPEED_6_875_Hz;
+ devpriv->ai_speed = MPC624_SPEED_6_875_HZ;
break;
default:
- devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
+ devpriv->ai_speed = MPC624_SPEED_3_52_KHZ;
}
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
return ret;
+ /* Analog Input subdevice */
s = &dev->subdevices[0];
- s->type = COMEDI_SUBD_AI;
- s->subdev_flags = SDF_READABLE | SDF_DIFF;
- s->n_chan = 8;
- switch (it->options[1]) {
- default:
- s->maxdata = 0x3FFFFFFF;
- }
-
- switch (it->options[1]) {
- case 0:
- s->range_table = &range_mpc624_bipolar1;
- break;
- default:
- s->range_table = &range_mpc624_bipolar10;
- }
- s->len_chanlist = 1;
- s->insn_read = mpc624_ai_rinsn;
+ s->type = COMEDI_SUBD_AI;
+ s->subdev_flags = SDF_READABLE | SDF_DIFF;
+ s->n_chan = 4;
+ s->maxdata = 0x3fffffff;
+ s->range_table = (it->options[1] == 0) ? &range_mpc624_bipolar1
+ : &range_mpc624_bipolar10;
+ s->insn_read = mpc624_ai_insn_read;
return 0;
}
@@ -353,5 +316,5 @@ static struct comedi_driver mpc624_driver = {
module_comedi_driver(mpc624_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_DESCRIPTION("Comedi driver for Micro/sys MPC-624 PC/104 board");
MODULE_LICENSE("GPL");
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.