aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/comedi/drivers/multiq3.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/comedi/drivers/multiq3.c')
-rw-r--r--drivers/staging/comedi/drivers/multiq3.c358
1 files changed, 205 insertions, 153 deletions
diff --git a/drivers/staging/comedi/drivers/multiq3.c b/drivers/staging/comedi/drivers/multiq3.c
index 8471219210b6..b5a26f7b4332 100644
--- a/drivers/staging/comedi/drivers/multiq3.c
+++ b/drivers/staging/comedi/drivers/multiq3.c
@@ -1,79 +1,91 @@
/*
- comedi/drivers/multiq3.c
- Hardware driver for Quanser Consulting MultiQ-3 board
-
- COMEDI - Linux Control and Measurement Device Interface
- Copyright (C) 1999 Anders Blomdell <anders.blomdell@control.lth.se>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ * multiq3.c
+ * Hardware driver for Quanser Consulting MultiQ-3 board
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 1999 Anders Blomdell <anders.blomdell@control.lth.se>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
*/
-/*
-Driver: multiq3
-Description: Quanser Consulting MultiQ-3
-Author: Anders Blomdell <anders.blomdell@control.lth.se>
-Status: works
-Devices: [Quanser Consulting] MultiQ-3 (multiq3)
-
-*/
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include "../comedidev.h"
/*
- * MULTIQ-3 port offsets
+ * Driver: multiq3
+ * Description: Quanser Consulting MultiQ-3
+ * Devices: [Quanser Consulting] MultiQ-3 (multiq3)
+ * Author: Anders Blomdell <anders.blomdell@control.lth.se>
+ * Status: works
+ *
+ * Configuration Options:
+ * [0] - I/O port base address
+ * [1] - IRQ (not used)
+ * [2] - Number of optional encoder chips installed on board
+ * 0 = none
+ * 1 = 2 inputs (Model -2E)
+ * 2 = 4 inputs (Model -4E)
+ * 3 = 6 inputs (Model -6E)
+ * 4 = 8 inputs (Model -8E)
*/
-#define MULTIQ3_DIGIN_PORT 0
-#define MULTIQ3_DIGOUT_PORT 0
-#define MULTIQ3_DAC_DATA 2
-#define MULTIQ3_AD_DATA 4
-#define MULTIQ3_AD_CS 4
-#define MULTIQ3_STATUS 6
-#define MULTIQ3_CONTROL 6
-#define MULTIQ3_CLK_DATA 8
-#define MULTIQ3_ENC_DATA 12
-#define MULTIQ3_ENC_CONTROL 14
-/*
- * flags for CONTROL register
- */
-#define MULTIQ3_AD_MUX_EN 0x0040
-#define MULTIQ3_AD_AUTOZ 0x0080
-#define MULTIQ3_AD_AUTOCAL 0x0100
-#define MULTIQ3_AD_SH 0x0200
-#define MULTIQ3_AD_CLOCK_4M 0x0400
-#define MULTIQ3_DA_LOAD 0x1800
+#include <linux/module.h>
-#define MULTIQ3_CONTROL_MUST 0x0600
+#include "../comedidev.h"
/*
- * flags for STATUS register
+ * Register map
*/
-#define MULTIQ3_STATUS_EOC 0x008
-#define MULTIQ3_STATUS_EOC_I 0x010
+#define MULTIQ3_DI_REG 0x00
+#define MULTIQ3_DO_REG 0x00
+#define MULTIQ3_AO_REG 0x02
+#define MULTIQ3_AI_REG 0x04
+#define MULTIQ3_AI_CONV_REG 0x04
+#define MULTIQ3_STATUS_REG 0x06
+#define MULTIQ3_STATUS_EOC BIT(3)
+#define MULTIQ3_STATUS_EOC_I BIT(4)
+#define MULTIQ3_CTRL_REG 0x06
+#define MULTIQ3_CTRL_AO_CHAN(x) (((x) & 0x7) << 0)
+#define MULTIQ3_CTRL_RC(x) (((x) & 0x3) << 0)
+#define MULTIQ3_CTRL_AI_CHAN(x) (((x) & 0x7) << 3)
+#define MULTIQ3_CTRL_E_CHAN(x) (((x) & 0x7) << 3)
+#define MULTIQ3_CTRL_EN BIT(6)
+#define MULTIQ3_CTRL_AZ BIT(7)
+#define MULTIQ3_CTRL_CAL BIT(8)
+#define MULTIQ3_CTRL_SH BIT(9)
+#define MULTIQ3_CTRL_CLK BIT(10)
+#define MULTIQ3_CTRL_LD (3 << 11)
+#define MULTIQ3_CLK_REG 0x08
+#define MULTIQ3_ENC_DATA_REG 0x0c
+#define MULTIQ3_ENC_CTRL_REG 0x0e
/*
- * flags for encoder control
+ * Encoder chip commands (from the programming manual)
*/
-#define MULTIQ3_CLOCK_DATA 0x00
-#define MULTIQ3_CLOCK_SETUP 0x18
-#define MULTIQ3_INPUT_SETUP 0x41
-#define MULTIQ3_QUAD_X4 0x38
-#define MULTIQ3_BP_RESET 0x01
-#define MULTIQ3_CNTR_RESET 0x02
-#define MULTIQ3_TRSFRPR_CTR 0x08
-#define MULTIQ3_TRSFRCNTR_OL 0x10
-#define MULTIQ3_EFLAG_RESET 0x06
-
-#define MULTIQ3_TIMEOUT 30
+#define MULTIQ3_CLOCK_DATA 0x00 /* FCK frequency divider */
+#define MULTIQ3_CLOCK_SETUP 0x18 /* xfer PR0 to PSC */
+#define MULTIQ3_INPUT_SETUP 0x41 /* enable inputs A and B */
+#define MULTIQ3_QUAD_X4 0x38 /* quadrature */
+#define MULTIQ3_BP_RESET 0x01 /* reset byte pointer */
+#define MULTIQ3_CNTR_RESET 0x02 /* reset counter */
+#define MULTIQ3_TRSFRPR_CTR 0x08 /* xfre preset reg to counter */
+#define MULTIQ3_TRSFRCNTR_OL 0x10 /* xfer CNTR to OL (x and y) */
+#define MULTIQ3_EFLAG_RESET 0x06 /* reset E bit of flag reg */
+
+static void multiq3_set_ctrl(struct comedi_device *dev, unsigned int bits)
+{
+ /*
+ * According to the programming manual, the SH and CLK bits should
+ * be kept high at all times.
+ */
+ outw(MULTIQ3_CTRL_SH | MULTIQ3_CTRL_CLK | bits,
+ dev->iobase + MULTIQ3_CTRL_REG);
+}
static int multiq3_ai_status(struct comedi_device *dev,
struct comedi_subdevice *s,
@@ -82,7 +94,7 @@ static int multiq3_ai_status(struct comedi_device *dev,
{
unsigned int status;
- status = inw(dev->iobase + MULTIQ3_STATUS);
+ status = inw(dev->iobase + MULTIQ3_STATUS_REG);
if (status & context)
return 0;
return -EBUSY;
@@ -90,36 +102,39 @@ static int multiq3_ai_status(struct comedi_device *dev,
static int multiq3_ai_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- int n;
- int chan;
- unsigned int hi, lo;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ unsigned int val;
int ret;
+ int i;
- chan = CR_CHAN(insn->chanspec);
- outw(MULTIQ3_CONTROL_MUST | MULTIQ3_AD_MUX_EN | (chan << 3),
- dev->iobase + MULTIQ3_CONTROL);
+ multiq3_set_ctrl(dev, MULTIQ3_CTRL_EN | MULTIQ3_CTRL_AI_CHAN(chan));
ret = comedi_timeout(dev, s, insn, multiq3_ai_status,
MULTIQ3_STATUS_EOC);
if (ret)
return ret;
- for (n = 0; n < insn->n; n++) {
- outw(0, dev->iobase + MULTIQ3_AD_CS);
+ for (i = 0; i < insn->n; i++) {
+ outw(0, dev->iobase + MULTIQ3_AI_CONV_REG);
ret = comedi_timeout(dev, s, insn, multiq3_ai_status,
MULTIQ3_STATUS_EOC_I);
if (ret)
return ret;
- hi = inb(dev->iobase + MULTIQ3_AD_CS);
- lo = inb(dev->iobase + MULTIQ3_AD_CS);
- data[n] = (((hi << 8) | lo) + 0x1000) & 0x1fff;
+ /* get a 16-bit sample; mask it to the subdevice resolution */
+ val = inb(dev->iobase + MULTIQ3_AI_REG) << 8;
+ val |= inb(dev->iobase + MULTIQ3_AI_REG);
+ val &= s->maxdata;
+
+ /* munge the 2's complement value to offset binary */
+ data[i] = comedi_offset_munge(s, val);
}
- return n;
+ return insn->n;
}
static int multiq3_ao_insn_write(struct comedi_device *dev,
@@ -133,10 +148,10 @@ static int multiq3_ao_insn_write(struct comedi_device *dev,
for (i = 0; i < insn->n; i++) {
val = data[i];
- outw(MULTIQ3_CONTROL_MUST | MULTIQ3_DA_LOAD | chan,
- dev->iobase + MULTIQ3_CONTROL);
- outw(val, dev->iobase + MULTIQ3_DAC_DATA);
- outw(MULTIQ3_CONTROL_MUST, dev->iobase + MULTIQ3_CONTROL);
+ multiq3_set_ctrl(dev, MULTIQ3_CTRL_LD |
+ MULTIQ3_CTRL_AO_CHAN(chan));
+ outw(val, dev->iobase + MULTIQ3_AO_REG);
+ multiq3_set_ctrl(dev, 0);
}
s->readback[chan] = val;
@@ -147,7 +162,7 @@ static int multiq3_di_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
- data[1] = inw(dev->iobase + MULTIQ3_DIGIN_PORT);
+ data[1] = inw(dev->iobase + MULTIQ3_DI_REG);
return insn->n;
}
@@ -158,7 +173,7 @@ static int multiq3_do_insn_bits(struct comedi_device *dev,
unsigned int *data)
{
if (comedi_dio_update_state(s, data))
- outw(s->state, dev->iobase + MULTIQ3_DIGOUT_PORT);
+ outw(s->state, dev->iobase + MULTIQ3_DO_REG);
data[1] = s->state;
@@ -170,41 +185,76 @@ static int multiq3_encoder_insn_read(struct comedi_device *dev,
struct comedi_insn *insn,
unsigned int *data)
{
- int chan = CR_CHAN(insn->chanspec);
- int control = MULTIQ3_CONTROL_MUST | MULTIQ3_AD_MUX_EN | (chan << 3);
- int value;
- int n;
-
- for (n = 0; n < insn->n; n++) {
- outw(control, dev->iobase + MULTIQ3_CONTROL);
- outb(MULTIQ3_BP_RESET, dev->iobase + MULTIQ3_ENC_CONTROL);
- outb(MULTIQ3_TRSFRCNTR_OL, dev->iobase + MULTIQ3_ENC_CONTROL);
- value = inb(dev->iobase + MULTIQ3_ENC_DATA);
- value |= (inb(dev->iobase + MULTIQ3_ENC_DATA) << 8);
- value |= (inb(dev->iobase + MULTIQ3_ENC_DATA) << 16);
- data[n] = (value + 0x800000) & 0xffffff;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ unsigned int val;
+ int i;
+
+ for (i = 0; i < insn->n; i++) {
+ /* select encoder channel */
+ multiq3_set_ctrl(dev, MULTIQ3_CTRL_EN |
+ MULTIQ3_CTRL_E_CHAN(chan));
+
+ /* reset the byte pointer */
+ outb(MULTIQ3_BP_RESET, dev->iobase + MULTIQ3_ENC_CTRL_REG);
+
+ /* latch the data */
+ outb(MULTIQ3_TRSFRCNTR_OL, dev->iobase + MULTIQ3_ENC_CTRL_REG);
+
+ /* read the 24-bit encoder data (lsb/mid/msb) */
+ val = inb(dev->iobase + MULTIQ3_ENC_DATA_REG);
+ val |= (inb(dev->iobase + MULTIQ3_ENC_DATA_REG) << 8);
+ val |= (inb(dev->iobase + MULTIQ3_ENC_DATA_REG) << 16);
+
+ /*
+ * Munge the data so that the reset value is in the middle
+ * of the maxdata range, i.e.:
+ *
+ * real value comedi value
+ * 0xffffff 0x7fffff 1 negative count
+ * 0x000000 0x800000 reset value
+ * 0x000001 0x800001 1 positive count
+ *
+ * It's possible for the 24-bit counter to overflow but it
+ * would normally take _quite_ a few turns. A 2000 line
+ * encoder in quadrature results in 8000 counts/rev. So about
+ * 1048 turns in either direction can be measured without
+ * an overflow.
+ */
+ data[i] = (val + ((s->maxdata + 1) >> 1)) & s->maxdata;
}
- return n;
+ return insn->n;
}
-static void encoder_reset(struct comedi_device *dev)
+static void multiq3_encoder_reset(struct comedi_device *dev,
+ unsigned int chan)
{
- struct comedi_subdevice *s = &dev->subdevices[4];
- int chan;
-
- for (chan = 0; chan < s->n_chan; chan++) {
- int control =
- MULTIQ3_CONTROL_MUST | MULTIQ3_AD_MUX_EN | (chan << 3);
- outw(control, dev->iobase + MULTIQ3_CONTROL);
- outb(MULTIQ3_EFLAG_RESET, dev->iobase + MULTIQ3_ENC_CONTROL);
- outb(MULTIQ3_BP_RESET, dev->iobase + MULTIQ3_ENC_CONTROL);
- outb(MULTIQ3_CLOCK_DATA, dev->iobase + MULTIQ3_ENC_DATA);
- outb(MULTIQ3_CLOCK_SETUP, dev->iobase + MULTIQ3_ENC_CONTROL);
- outb(MULTIQ3_INPUT_SETUP, dev->iobase + MULTIQ3_ENC_CONTROL);
- outb(MULTIQ3_QUAD_X4, dev->iobase + MULTIQ3_ENC_CONTROL);
- outb(MULTIQ3_CNTR_RESET, dev->iobase + MULTIQ3_ENC_CONTROL);
+ multiq3_set_ctrl(dev, MULTIQ3_CTRL_EN | MULTIQ3_CTRL_E_CHAN(chan));
+ outb(MULTIQ3_EFLAG_RESET, dev->iobase + MULTIQ3_ENC_CTRL_REG);
+ outb(MULTIQ3_BP_RESET, dev->iobase + MULTIQ3_ENC_CTRL_REG);
+ outb(MULTIQ3_CLOCK_DATA, dev->iobase + MULTIQ3_ENC_DATA_REG);
+ outb(MULTIQ3_CLOCK_SETUP, dev->iobase + MULTIQ3_ENC_CTRL_REG);
+ outb(MULTIQ3_INPUT_SETUP, dev->iobase + MULTIQ3_ENC_CTRL_REG);
+ outb(MULTIQ3_QUAD_X4, dev->iobase + MULTIQ3_ENC_CTRL_REG);
+ outb(MULTIQ3_CNTR_RESET, dev->iobase + MULTIQ3_ENC_CTRL_REG);
+}
+
+static int multiq3_encoder_insn_config(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ unsigned int chan = CR_CHAN(insn->chanspec);
+
+ switch (data[0]) {
+ case INSN_CONFIG_RESET:
+ multiq3_encoder_reset(dev, chan);
+ break;
+ default:
+ return -EINVAL;
}
+
+ return insn->n;
}
static int multiq3_attach(struct comedi_device *dev,
@@ -212,6 +262,7 @@ static int multiq3_attach(struct comedi_device *dev,
{
struct comedi_subdevice *s;
int ret;
+ int i;
ret = comedi_request_region(dev, it->options[0], 0x10);
if (ret)
@@ -221,57 +272,58 @@ static int multiq3_attach(struct comedi_device *dev,
if (ret)
return ret;
+ /* Analog Input subdevice */
s = &dev->subdevices[0];
- /* ai subdevice */
- s->type = COMEDI_SUBD_AI;
- s->subdev_flags = SDF_READABLE | SDF_GROUND;
- s->n_chan = 8;
- s->insn_read = multiq3_ai_insn_read;
- s->maxdata = 0x1fff;
- s->range_table = &range_bipolar5;
-
+ s->type = COMEDI_SUBD_AI;
+ s->subdev_flags = SDF_READABLE | SDF_GROUND;
+ s->n_chan = 8;
+ s->maxdata = 0x1fff;
+ s->range_table = &range_bipolar5;
+ s->insn_read = multiq3_ai_insn_read;
+
+ /* Analog Output subdevice */
s = &dev->subdevices[1];
- /* ao subdevice */
- s->type = COMEDI_SUBD_AO;
- s->subdev_flags = SDF_WRITABLE;
- s->n_chan = 8;
- s->maxdata = 0xfff;
- s->range_table = &range_bipolar5;
- s->insn_write = multiq3_ao_insn_write;
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = 8;
+ s->maxdata = 0x0fff;
+ s->range_table = &range_bipolar5;
+ s->insn_write = multiq3_ao_insn_write;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
+ /* Digital Input subdevice */
s = &dev->subdevices[2];
- /* di subdevice */
- s->type = COMEDI_SUBD_DI;
- s->subdev_flags = SDF_READABLE;
- s->n_chan = 16;
- s->insn_bits = multiq3_di_insn_bits;
- s->maxdata = 1;
- s->range_table = &range_digital;
-
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = 16;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = multiq3_di_insn_bits;
+
+ /* Digital Output subdevice */
s = &dev->subdevices[3];
- /* do subdevice */
- s->type = COMEDI_SUBD_DO;
- s->subdev_flags = SDF_WRITABLE;
- s->n_chan = 16;
- s->insn_bits = multiq3_do_insn_bits;
- s->maxdata = 1;
- s->range_table = &range_digital;
- s->state = 0;
-
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = 16;
+ s->maxdata = 1;
+ s->range_table = &range_digital;
+ s->insn_bits = multiq3_do_insn_bits;
+
+ /* Encoder (Counter) subdevice */
s = &dev->subdevices[4];
- /* encoder (counter) subdevice */
- s->type = COMEDI_SUBD_COUNTER;
- s->subdev_flags = SDF_READABLE | SDF_LSAMPL;
- s->n_chan = it->options[2] * 2;
- s->insn_read = multiq3_encoder_insn_read;
- s->maxdata = 0xffffff;
- s->range_table = &range_unknown;
+ s->type = COMEDI_SUBD_COUNTER;
+ s->subdev_flags = SDF_READABLE | SDF_LSAMPL;
+ s->n_chan = it->options[2] * 2;
+ s->maxdata = 0x00ffffff;
+ s->range_table = &range_unknown;
+ s->insn_read = multiq3_encoder_insn_read;
+ s->insn_config = multiq3_encoder_insn_config;
- encoder_reset(dev);
+ for (i = 0; i < s->n_chan; i++)
+ multiq3_encoder_reset(dev, i);
return 0;
}
@@ -285,5 +337,5 @@ static struct comedi_driver multiq3_driver = {
module_comedi_driver(multiq3_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_DESCRIPTION("Comedi driver for Quanser Consulting MultiQ-3 board");
MODULE_LICENSE("GPL");
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.