diff options
Diffstat (limited to 'drivers/staging/comedi/drivers/ni_labpc_cs.c')
| -rw-r--r-- | drivers/staging/comedi/drivers/ni_labpc_cs.c | 95 |
1 files changed, 44 insertions, 51 deletions
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index a1c69ac075d5..3d4d0b9ad4e1 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -1,57 +1,50 @@ /* - comedi/drivers/ni_labpc_cs.c - Driver for National Instruments daqcard-1200 boards - Copyright (C) 2001, 2002, 2003 Frank Mori Hess <fmhess@users.sourceforge.net> - - PCMCIA crap is adapted from dummy_cs.c 1.31 2001/08/24 12:13:13 - from the pcmcia package. - The initial developer of the pcmcia dummy_cs.c code is David A. Hinds - <dahinds@users.sourceforge.net>. Portions created by David A. Hinds - are Copyright (C) 1999 David A. Hinds. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. -*/ -/* -Driver: ni_labpc_cs -Description: National Instruments Lab-PC (& compatibles) -Author: Frank Mori Hess <fmhess@users.sourceforge.net> -Devices: [National Instruments] DAQCard-1200 (daqcard-1200) -Status: works - -Thanks go to Fredrik Lingvall for much testing and perseverance in -helping to debug daqcard-1200 support. - -The 1200 series boards have onboard calibration dacs for correcting -analog input/output offsets and gains. The proper settings for these -caldacs are stored on the board's eeprom. To read the caldac values -from the eeprom and store them into a file that can be then be used by -comedilib, use the comedi_calibrate program. - -Configuration options: - none - -The daqcard-1200 has quirky chanlist requirements -when scanning multiple channels. Multiple channel scan -sequence must start at highest channel, then decrement down to -channel 0. Chanlists consisting of all one channel -are also legal, and allow you to pace conversions in bursts. - -*/ + * Driver for National Instruments daqcard-1200 boards + * Copyright (C) 2001, 2002, 2003 Frank Mori Hess <fmhess@users.sourceforge.net> + * + * PCMCIA crap is adapted from dummy_cs.c 1.31 2001/08/24 12:13:13 + * from the pcmcia package. + * The initial developer of the pcmcia dummy_cs.c code is David A. Hinds + * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * General Public License for more details. + */ /* - -NI manuals: -340988a (daqcard-1200) - -*/ + * Driver: ni_labpc_cs + * Description: National Instruments Lab-PC (& compatibles) + * Author: Frank Mori Hess <fmhess@users.sourceforge.net> + * Devices: [National Instruments] DAQCard-1200 (daqcard-1200) + * Status: works + * + * Thanks go to Fredrik Lingvall for much testing and perseverance in + * helping to debug daqcard-1200 support. + * + * The 1200 series boards have onboard calibration dacs for correcting + * analog input/output offsets and gains. The proper settings for these + * caldacs are stored on the board's eeprom. To read the caldac values + * from the eeprom and store them into a file that can be then be used by + * comedilib, use the comedi_calibrate program. + * + * Configuration options: none + * + * The daqcard-1200 has quirky chanlist requirements when scanning multiple + * channels. Multiple channel scan sequence must start at highest channel, + * then decrement down to channel 0. Chanlists consisting of all one channel + * are also legal, and allow you to pace conversions in bursts. + * + * NI manuals: + * 340988a (daqcard-1200) + */ #include <linux/module.h> |