diff options
Diffstat (limited to 'drivers/staging/dgap/dgap_fep5.h')
| -rw-r--r-- | drivers/staging/dgap/dgap_fep5.h | 253 |
1 files changed, 0 insertions, 253 deletions
diff --git a/drivers/staging/dgap/dgap_fep5.h b/drivers/staging/dgap/dgap_fep5.h deleted file mode 100644 index c9abc406a1e0..000000000000 --- a/drivers/staging/dgap/dgap_fep5.h +++ /dev/null @@ -1,253 +0,0 @@ -/* - * Copyright 2003 Digi International (www.digi.com) - * Scott H Kilau <Scott_Kilau at digi dot com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!! - * - ************************************************************************ - *** FEP Version 5 dependent definitions - ************************************************************************/ - -#ifndef __DGAP_FEP5_H -#define __DGAP_FEP5_H - -/************************************************************************ - * FEP memory offsets - ************************************************************************/ -#define START 0x0004L /* Execution start address */ - -#define CMDBUF 0x0d10L /* Command (cm_t) structure offset */ -#define CMDSTART 0x0400L /* Start of command buffer */ -#define CMDMAX 0x0800L /* End of command buffer */ - -#define EVBUF 0x0d18L /* Event (ev_t) structure */ -#define EVSTART 0x0800L /* Start of event buffer */ -#define EVMAX 0x0c00L /* End of event buffer */ -#define FEP5_PLUS 0x0E40 /* ASCII '5' and ASCII 'A' is here */ -#define ECS_SEG 0x0E44 /* Segment of the extended channel structure */ -#define LINE_SPEED 0x10 /* Offset into ECS_SEG for line speed */ - /* if the fep has extended capabilities */ - -/* BIOS MAGIC SPOTS */ -#define ERROR 0x0C14L /* BIOS error code */ -#define SEQUENCE 0x0C12L /* BIOS sequence indicator */ -#define POSTAREA 0x0C00L /* POST complete message area */ - -/* FEP MAGIC SPOTS */ -#define FEPSTAT POSTAREA /* OS here when FEP comes up */ -#define NCHAN 0x0C02L /* number of ports FEP sees */ -#define PANIC 0x0C10L /* PANIC area for FEP */ -#define KMEMEM 0x0C30L /* Memory for KME use */ -#define CONFIG 0x0CD0L /* Concentrator configuration info */ -#define CONFIGSIZE 0x0030 /* configuration info size */ -#define DOWNREQ 0x0D00 /* Download request buffer pointer */ - -#define CHANBUF 0x1000L /* Async channel (bs_t) structs */ -#define FEPOSSIZE 0x1FFF /* 8K FEPOS */ - -#define XEMPORTS 0xC02 /* - * Offset in board memory where FEP5 stores - * how many ports it has detected. - * NOTE: FEP5 reports 64 ports when the user - * has the cable in EBI OUT instead of EBI IN. - */ - -#define FEPCLR 0x00 -#define FEPMEM 0x02 -#define FEPRST 0x04 -#define FEPINT 0x08 -#define FEPMASK 0x0e -#define FEPWIN 0x80 - -#define LOWMEM 0x0100 -#define HIGHMEM 0x7f00 - -#define FEPTIMEOUT 200000 - -#define ENABLE_INTR 0x0e04 /* Enable interrupts flag */ -#define FEPPOLL_MIN 1 /* minimum of 1 millisecond */ -#define FEPPOLL_MAX 20 /* maximum of 20 milliseconds */ -#define FEPPOLL 0x0c26 /* Fep event poll interval */ - -#define IALTPIN 0x0080 /* Input flag to swap DSR <-> DCD */ - -/************************************************************************ - * Command structure definition. - ************************************************************************/ -struct cm_t { - volatile unsigned short cm_head; /* Command buffer head offset */ - volatile unsigned short cm_tail; /* Command buffer tail offset */ - volatile unsigned short cm_start; /* start offset of buffer */ - volatile unsigned short cm_max; /* last offset of buffer */ -}; - -/************************************************************************ - * Event structure definition. - ************************************************************************/ -struct ev_t { - volatile unsigned short ev_head; /* Command buffer head offset */ - volatile unsigned short ev_tail; /* Command buffer tail offset */ - volatile unsigned short ev_start; /* start offset of buffer */ - volatile unsigned short ev_max; /* last offset of buffer */ -}; - -/************************************************************************ - * Download buffer structure. - ************************************************************************/ -struct downld_t { - uchar dl_type; /* Header */ - uchar dl_seq; /* Download sequence */ - ushort dl_srev; /* Software revision number */ - ushort dl_lrev; /* Low revision number */ - ushort dl_hrev; /* High revision number */ - ushort dl_seg; /* Start segment address */ - ushort dl_size; /* Number of bytes to download */ - uchar dl_data[1024]; /* Download data */ -}; - -/************************************************************************ - * Per channel buffer structure - ************************************************************************ - * Base Structure Entries Usage Meanings to Host * - * * - * W = read write R = read only * - * C = changed by commands only * - * U = unknown (may be changed w/o notice) * - ************************************************************************/ -struct bs_t { - volatile unsigned short tp_jmp; /* Transmit poll jump */ - volatile unsigned short tc_jmp; /* Cooked procedure jump */ - volatile unsigned short ri_jmp; /* Not currently used */ - volatile unsigned short rp_jmp; /* Receive poll jump */ - - volatile unsigned short tx_seg; /* W Tx segment */ - volatile unsigned short tx_head; /* W Tx buffer head offset */ - volatile unsigned short tx_tail; /* R Tx buffer tail offset */ - volatile unsigned short tx_max; /* W Tx buffer size - 1 */ - - volatile unsigned short rx_seg; /* W Rx segment */ - volatile unsigned short rx_head; /* W Rx buffer head offset */ - volatile unsigned short rx_tail; /* R Rx buffer tail offset */ - volatile unsigned short rx_max; /* W Rx buffer size - 1 */ - - volatile unsigned short tx_lw; /* W Tx buffer low water mark */ - volatile unsigned short rx_lw; /* W Rx buffer low water mark */ - volatile unsigned short rx_hw; /* W Rx buffer high water mark */ - volatile unsigned short incr; /* W Increment to next channel */ - - volatile unsigned short fepdev; /* U SCC device base address */ - volatile unsigned short edelay; /* W Exception delay */ - volatile unsigned short blen; /* W Break length */ - volatile unsigned short btime; /* U Break complete time */ - - volatile unsigned short iflag; /* C UNIX input flags */ - volatile unsigned short oflag; /* C UNIX output flags */ - volatile unsigned short cflag; /* C UNIX control flags */ - volatile unsigned short wfill[13]; /* U Reserved for expansion */ - - volatile unsigned char num; /* U Channel number */ - volatile unsigned char ract; /* U Receiver active counter */ - volatile unsigned char bstat; /* U Break status bits */ - volatile unsigned char tbusy; /* W Transmit busy */ - volatile unsigned char iempty; /* W Transmit empty event enable */ - volatile unsigned char ilow; /* W Transmit low-water event enable */ - volatile unsigned char idata; /* W Receive data interrupt enable */ - volatile unsigned char eflag; /* U Host event flags */ - - volatile unsigned char tflag; /* U Transmit flags */ - volatile unsigned char rflag; /* U Receive flags */ - volatile unsigned char xmask; /* U Transmit ready flags */ - volatile unsigned char xval; /* U Transmit ready value */ - volatile unsigned char m_stat; /* RC Modem status bits */ - volatile unsigned char m_change; /* U Modem bits which changed */ - volatile unsigned char m_int; /* W Modem interrupt enable bits */ - volatile unsigned char m_last; /* U Last modem status */ - - volatile unsigned char mtran; /* C Unreported modem trans */ - volatile unsigned char orun; /* C Buffer overrun occurred */ - volatile unsigned char astartc; /* W Auxiliary Xon char */ - volatile unsigned char astopc; /* W Auxiliary Xoff char */ - volatile unsigned char startc; /* W Xon character */ - volatile unsigned char stopc; /* W Xoff character */ - volatile unsigned char vnextc; /* W Vnext character */ - volatile unsigned char hflow; /* C Software flow control */ - - volatile unsigned char fillc; /* U Delay Fill character */ - volatile unsigned char ochar; /* U Saved output character */ - volatile unsigned char omask; /* U Output character mask */ - - volatile unsigned char bfill[13]; /* U Reserved for expansion */ - - volatile unsigned char scc[16]; /* U SCC registers */ -}; - - -/************************************************************************ - * FEP supported functions - ************************************************************************/ -#define SRLOW 0xe0 /* Set receive low water */ -#define SRHIGH 0xe1 /* Set receive high water */ -#define FLUSHTX 0xe2 /* Flush transmit buffer */ -#define PAUSETX 0xe3 /* Pause data transmission */ -#define RESUMETX 0xe4 /* Resume data transmission */ -#define SMINT 0xe5 /* Set Modem Interrupt */ -#define SAFLOWC 0xe6 /* Set Aux. flow control chars */ -#define SBREAK 0xe8 /* Send break */ -#define SMODEM 0xe9 /* Set 8530 modem control lines */ -#define SIFLAG 0xea /* Set UNIX iflags */ -#define SFLOWC 0xeb /* Set flow control characters */ -#define STLOW 0xec /* Set transmit low water mark */ -#define RPAUSE 0xee /* Pause receive */ -#define RRESUME 0xef /* Resume receive */ -#define CHRESET 0xf0 /* Reset Channel */ -#define BUFSETALL 0xf2 /* Set Tx & Rx buffer size avail*/ -#define SOFLAG 0xf3 /* Set UNIX oflags */ -#define SHFLOW 0xf4 /* Set hardware handshake */ -#define SCFLAG 0xf5 /* Set UNIX cflags */ -#define SVNEXT 0xf6 /* Set VNEXT character */ -#define SPINTFC 0xfc /* Reserved */ -#define SCOMMODE 0xfd /* Set RS232/422 mode */ - - -/************************************************************************ - * Modes for SCOMMODE - ************************************************************************/ -#define MODE_232 0x00 -#define MODE_422 0x01 - - -/************************************************************************ - * Event flags. - ************************************************************************/ -#define IFBREAK 0x01 /* Break received */ -#define IFTLW 0x02 /* Transmit low water */ -#define IFTEM 0x04 /* Transmitter empty */ -#define IFDATA 0x08 /* Receive data present */ -#define IFMODEM 0x20 /* Modem status change */ - -/************************************************************************ - * Modem flags - ************************************************************************/ -# define DM_RTS 0x02 /* Request to send */ -# define DM_CD 0x80 /* Carrier detect */ -# define DM_DSR 0x20 /* Data set ready */ -# define DM_CTS 0x10 /* Clear to send */ -# define DM_RI 0x40 /* Ring indicator */ -# define DM_DTR 0x01 /* Data terminal ready */ - - -#endif |