diff options
Diffstat (limited to 'drivers/staging/et131x/et131x_config.c')
| -rw-r--r-- | drivers/staging/et131x/et131x_config.c | 325 |
1 files changed, 0 insertions, 325 deletions
diff --git a/drivers/staging/et131x/et131x_config.c b/drivers/staging/et131x/et131x_config.c deleted file mode 100644 index 0adbaa6ca078..000000000000 --- a/drivers/staging/et131x/et131x_config.c +++ /dev/null @@ -1,325 +0,0 @@ -/* - * Agere Systems Inc. - * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * http://www.agere.com - * - *------------------------------------------------------------------------------ - * - * et131x_config.c - Handles parsing of configuration data during - * initialization. - * - *------------------------------------------------------------------------------ - * - * SOFTWARE LICENSE - * - * This software is provided subject to the following terms and conditions, - * which you should read carefully before using the software. Using this - * software indicates your acceptance of these terms and conditions. If you do - * not agree with these terms and conditions, do not use the software. - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * - * Redistribution and use in source or binary forms, with or without - * modifications, are permitted provided that the following conditions are met: - * - * . Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following Disclaimer as comments in the code as - * well as in the documentation and/or other materials provided with the - * distribution. - * - * . Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following Disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * . Neither the name of Agere Systems Inc. nor the names of the contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * Disclaimer - * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY - * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN - * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - */ - -#include "et131x_version.h" -#include "et131x_debug.h" -#include "et131x_defs.h" - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include <linux/sched.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/in.h> -#include <linux/delay.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/bitops.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/if_arp.h> -#include <linux/ioport.h> - -#include "et1310_phy.h" -#include "et1310_pm.h" -#include "et1310_jagcore.h" - -#include "et131x_adapter.h" -#include "et131x_initpci.h" -#include "et131x_config.h" - -#include "et1310_tx.h" - -/* Data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -extern dbg_info_t *et131x_dbginfo; -#endif /* CONFIG_ET131X_DEBUG */ - -/* Defines for Parameter Default/Min/Max vaules */ -#define PARM_SPEED_DUPLEX_DEF 0 -#define PARM_SPEED_DUPLEX_MIN 0 -#define PARM_SPEED_DUPLEX_MAX 5 - -#define PARM_VLAN_TAG_DEF 0 -#define PARM_VLAN_TAG_MIN 0 -#define PARM_VLAN_TAG_MAX 4095 - -#define PARM_FLOW_CTL_DEF 0 -#define PARM_FLOW_CTL_MIN 0 -#define PARM_FLOW_CTL_MAX 3 - -#define PARM_WOL_LINK_DEF 3 -#define PARM_WOL_LINK_MIN 0 -#define PARM_WOL_LINK_MAX 3 - -#define PARM_WOL_MATCH_DEF 7 -#define PARM_WOL_MATCH_MIN 0 -#define PARM_WOL_MATCH_MAX 7 - -#define PARM_JUMBO_PKT_DEF 1514 -#define PARM_JUMBO_PKT_MIN 1514 -#define PARM_JUMBO_PKT_MAX 9216 - -#define PARM_PHY_COMA_DEF 0 -#define PARM_PHY_COMA_MIN 0 -#define PARM_PHY_COMA_MAX 1 - -#define PARM_RX_NUM_BUFS_DEF 4 -#define PARM_RX_NUM_BUFS_MIN 1 -#define PARM_RX_NUM_BUFS_MAX 64 - -#define PARM_RX_TIME_INT_DEF 10 -#define PARM_RX_TIME_INT_MIN 2 -#define PARM_RX_TIME_INT_MAX 320 - -#define PARM_TX_NUM_BUFS_DEF 4 -#define PARM_TX_NUM_BUFS_MIN 1 -#define PARM_TX_NUM_BUFS_MAX 40 - -#define PARM_TX_TIME_INT_DEF 40 -#define PARM_TX_TIME_INT_MIN 1 -#define PARM_TX_TIME_INT_MAX 140 - -#define PARM_RX_MEM_END_DEF 0x2bc -#define PARM_RX_MEM_END_MIN 0 -#define PARM_RX_MEM_END_MAX 0x3ff - -#define PARM_MAC_STAT_DEF 1 -#define PARM_MAC_STAT_MIN 0 -#define PARM_MAC_STAT_MAX 1 - -#define PARM_SC_GAIN_DEF 7 -#define PARM_SC_GAIN_MIN 0 -#define PARM_SC_GAIN_MAX 7 - -#define PARM_PM_WOL_DEF 0 -#define PARM_PM_WOL_MIN 0 -#define PARM_PM_WOL_MAX 1 - -#define PARM_NMI_DISABLE_DEF 0 -#define PARM_NMI_DISABLE_MIN 0 -#define PARM_NMI_DISABLE_MAX 2 - -#define PARM_DMA_CACHE_DEF 0 -#define PARM_DMA_CACHE_MIN 0 -#define PARM_DMA_CACHE_MAX 15 - -#define PARM_PHY_LOOPBK_DEF 0 -#define PARM_PHY_LOOPBK_MIN 0 -#define PARM_PHY_LOOPBK_MAX 1 - -#define PARM_MAC_ADDRESS_DEF { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 } - -/* Module parameter for disabling NMI - * et131x_speed_set : - * Set Link speed and dublex manually (0-5) [0] - * 1 : 10Mb Half-Duplex - * 2 : 10Mb Full-Duplex - * 3 : 100Mb Half-Duplex - * 4 : 100Mb Full-Duplex - * 5 : 1000Mb Full-Duplex - * 0 : Auto Speed Auto Dublex // default - */ -static u32 et131x_nmi_disable = PARM_NMI_DISABLE_DEF; -module_param(et131x_nmi_disable, uint, 0); -MODULE_PARM_DESC(et131x_nmi_disable, "Disable NMI (0-2) [0]"); - -/* Module parameter for manual speed setting - * et131x_nmi_disable : - * Disable NMI (0-2) [0] - * 0 : - * 1 : - * 2 : - */ -static u32 et131x_speed_set = PARM_SPEED_DUPLEX_DEF; -module_param(et131x_speed_set, uint, 0); -MODULE_PARM_DESC(et131x_speed_set, - "Set Link speed and dublex manually (0-5) [0] \n 1 : 10Mb Half-Duplex \n 2 : 10Mb Full-Duplex \n 3 : 100Mb Half-Duplex \n 4 : 100Mb Full-Duplex \n 5 : 1000Mb Full-Duplex \n 0 : Auto Speed Auto Dublex"); - -/** - * et131x_config_parse - * @pAdapter: pointer to the private adapter struct - * - * Parses a configuration from some location (module parameters, for example) - * into the private adapter struct - */ -void et131x_config_parse(struct et131x_adapter *pAdapter) -{ - uint8_t macAddrDef[] = PARM_MAC_ADDRESS_DEF; - - DBG_ENTER(et131x_dbginfo); - - /* - * The NDIS driver uses the registry to store persistent per-device - * configuration, and reads this configuration into the appropriate - * elements of the private adapter structure on initialization. - * Because Linux has no analog to the registry, use this function to - * initialize the private adapter structure with a default - * configuration. - * - * One other possibility is to use a series of module parameters which - * can be passed in by the caller when the module is initialized. - * However, this implementation does not allow for seperate - * configurations in the event multiple devices are present, and hence - * will not suffice. - * - * If another method is derived which addresses this problem, this is - * where it should be implemented. - */ - - /* Set the private adapter struct with default values for the - * corresponding parameters - */ - if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF) { - DBG_VERBOSE(et131x_dbginfo, "Speed set manually to : %d \n", - et131x_speed_set); - pAdapter->SpeedDuplex = et131x_speed_set; - } else { - pAdapter->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; - } - - // pAdapter->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; - - pAdapter->RegistryVlanTag = PARM_VLAN_TAG_DEF; - pAdapter->RegistryFlowControl = PARM_FLOW_CTL_DEF; - pAdapter->RegistryWOLLink = PARM_WOL_LINK_DEF; - pAdapter->RegistryWOLMatch = PARM_WOL_MATCH_DEF; - pAdapter->RegistryJumboPacket = PARM_JUMBO_PKT_DEF; - pAdapter->RegistryPhyComa = PARM_PHY_COMA_DEF; - pAdapter->RegistryRxNumBuffers = PARM_RX_NUM_BUFS_DEF; - pAdapter->RegistryRxTimeInterval = PARM_RX_TIME_INT_DEF; - pAdapter->RegistryTxNumBuffers = PARM_TX_NUM_BUFS_DEF; - pAdapter->RegistryTxTimeInterval = PARM_TX_TIME_INT_DEF; - pAdapter->RegistryRxMemEnd = PARM_RX_MEM_END_DEF; - pAdapter->RegistryMACStat = PARM_MAC_STAT_DEF; - pAdapter->RegistrySCGain = PARM_SC_GAIN_DEF; - pAdapter->RegistryPMWOL = PARM_PM_WOL_DEF; - - if (et131x_nmi_disable != PARM_NMI_DISABLE_DEF) { - pAdapter->RegistryNMIDisable = et131x_nmi_disable; - } else { - pAdapter->RegistryNMIDisable = PARM_NMI_DISABLE_DEF; - } - - pAdapter->RegistryDMACache = PARM_DMA_CACHE_DEF; - pAdapter->RegistryPhyLoopbk = PARM_PHY_LOOPBK_DEF; - - /* Set the MAC address to a default */ - memcpy(pAdapter->CurrentAddress, macAddrDef, ETH_ALEN); - pAdapter->bOverrideAddress = false; - - DBG_TRACE(et131x_dbginfo, - "Default MAC Address : %02x:%02x:%02x:%02x:%02x:%02x\n", - pAdapter->CurrentAddress[0], pAdapter->CurrentAddress[1], - pAdapter->CurrentAddress[2], pAdapter->CurrentAddress[3], - pAdapter->CurrentAddress[4], pAdapter->CurrentAddress[5]); - - /* Decode SpeedDuplex - * - * Set up as if we are auto negotiating always and then change if we - * go into force mode - */ - pAdapter->AiForceSpeed = 0; // Auto speed - pAdapter->AiForceDpx = 0; // Auto FDX - - /* If we are the 10/100 device, and gigabit is somehow requested then - * knock it down to 100 full. - */ - if ((pAdapter->DeviceID == ET131X_PCI_DEVICE_ID_FAST) && - (pAdapter->SpeedDuplex == 5)) { - pAdapter->SpeedDuplex = 4; - } - - switch (pAdapter->SpeedDuplex) { - case 1: // 10Mb Half-Duplex - pAdapter->AiForceSpeed = 10; - pAdapter->AiForceDpx = 1; - break; - - case 2: // 10Mb Full-Duplex - pAdapter->AiForceSpeed = 10; - pAdapter->AiForceDpx = 2; - break; - - case 3: // 100Mb Half-Duplex - pAdapter->AiForceSpeed = 100; - pAdapter->AiForceDpx = 1; - break; - - case 4: // 100Mb Full-Duplex - pAdapter->AiForceSpeed = 100; - pAdapter->AiForceDpx = 2; - break; - - case 5: // 1000Mb Full-Duplex - pAdapter->AiForceSpeed = 1000; - pAdapter->AiForceDpx = 2; - break; - } - - DBG_LEAVE(et131x_dbginfo); -} |