diff options
Diffstat (limited to 'drivers/staging/ft1000/ft1000.h')
| -rw-r--r-- | drivers/staging/ft1000/ft1000.h | 366 |
1 files changed, 0 insertions, 366 deletions
diff --git a/drivers/staging/ft1000/ft1000.h b/drivers/staging/ft1000/ft1000.h deleted file mode 100644 index 8a2e4caa532d..000000000000 --- a/drivers/staging/ft1000/ft1000.h +++ /dev/null @@ -1,366 +0,0 @@ -/* - * Common structures and definitions for FT1000 Flarion Flash OFDM PCMCIA and - * USB devices. - * - * Originally copyright (c) 2002 Flarion Technologies - * - */ - -#define DSPVERSZ 4 -#define HWSERNUMSZ 16 -#define SKUSZ 20 -#define EUISZ 8 -#define MODESZ 2 -#define CALVERSZ 2 -#define CALDATESZ 6 - -#define ELECTRABUZZ_ID 0 /* ASIC ID for Electrabuzz */ -#define MAGNEMITE_ID 0x1a01 /* ASIC ID for Magnemite */ - -/* MEMORY MAP common to both ELECTRABUZZ and MAGNEMITE */ -#define FT1000_REG_DPRAM_ADDR 0x000E /* DPADR - Dual Port Ram Indirect - * Address Register - */ -#define FT1000_REG_SUP_CTRL 0x0020 /* HCTR - Host Control Register */ -#define FT1000_REG_SUP_STAT 0x0022 /* HSTAT - Host Status Register */ -#define FT1000_REG_RESET 0x0024 /* HCTR - Host Control Register */ -#define FT1000_REG_SUP_ISR 0x0026 /* HISR - Host Interrupt Status - * Register - */ -#define FT1000_REG_SUP_IMASK 0x0028 /* HIMASK - Host Interrupt Mask */ -#define FT1000_REG_DOORBELL 0x002a /* DBELL - Door Bell Register */ -#define FT1000_REG_ASIC_ID 0x002e /* ASICID - ASIC Identification - * Number - */ - -/* MEMORY MAP FOR ELECTRABUZZ ASIC */ -#define FT1000_REG_UFIFO_STAT 0x0000 /* UFSR - Uplink FIFO status register */ -#define FT1000_REG_UFIFO_BEG 0x0002 /* UFBR - Uplink FIFO beginning - * register - */ -#define FT1000_REG_UFIFO_MID 0x0004 /* UFMR - Uplink FIFO middle register */ -#define FT1000_REG_UFIFO_END 0x0006 /* UFER - Uplink FIFO end register */ -#define FT1000_REG_DFIFO_STAT 0x0008 /* DFSR - Downlink FIFO status - * register - */ -#define FT1000_REG_DFIFO 0x000A /* DFR - Downlink FIFO Register */ -#define FT1000_REG_DPRAM_DATA 0x000C /* DPRAM - Dual Port Indirect - * Data Register - */ -#define FT1000_REG_WATERMARK 0x0010 /* WMARK - Watermark Register */ - -/* MEMORY MAP FOR MAGNEMITE */ -#define FT1000_REG_MAG_UFDR 0x0000 /* UFDR - Uplink FIFO Data - * Register (32-bits) - */ -#define FT1000_REG_MAG_UFDRL 0x0000 /* UFDRL - Uplink FIFO Data - * Register low-word (16-bits) - */ -#define FT1000_REG_MAG_UFDRH 0x0002 /* UFDRH - Uplink FIFO Data Register - * high-word (16-bits) - */ -#define FT1000_REG_MAG_UFER 0x0004 /* UFER - Uplink FIFO End Register */ -#define FT1000_REG_MAG_UFSR 0x0006 /* UFSR - Uplink FIFO Status Register */ -#define FT1000_REG_MAG_DFR 0x0008 /* DFR - Downlink FIFO Register - * (32-bits) - */ -#define FT1000_REG_MAG_DFRL 0x0008 /* DFRL - Downlink FIFO Register - * low-word (16-bits) - */ -#define FT1000_REG_MAG_DFRH 0x000a /* DFRH - Downlink FIFO Register - * high-word (16-bits) - */ -#define FT1000_REG_MAG_DFSR 0x000c /* DFSR - Downlink FIFO Status - * Register - */ -#define FT1000_REG_MAG_DPDATA 0x0010 /* DPDATA - Dual Port RAM Indirect - * Data Register (32-bits) - */ -#define FT1000_REG_MAG_DPDATAL 0x0010 /* DPDATAL - Dual Port RAM Indirect - * Data Register low-word (16-bits) - */ -#define FT1000_REG_MAG_DPDATAH 0x0012 /* DPDATAH - Dual Port RAM Indirect Data - * Register high-word (16-bits) - */ -#define FT1000_REG_MAG_WATERMARK 0x002c /* WMARK - Watermark Register */ -#define FT1000_REG_MAG_VERSION 0x0030 /* LLC Version */ - -/* Reserved Dual Port RAM offsets for Electrabuzz */ -#define FT1000_DPRAM_TX_BASE 0x0002 /* Host to PC Card Messaging Area */ -#define FT1000_DPRAM_RX_BASE 0x0800 /* PC Card to Host Messaging Area */ -#define FT1000_FIFO_LEN 0x07FC /* total length for DSP FIFO tracking */ -#define FT1000_HI_HO 0x07FE /* heartbeat with HI/HO */ -#define FT1000_DSP_STATUS 0x0FFE /* dsp status - non-zero is a request - * to reset dsp - */ -#define FT1000_DSP_LED 0x0FFA /* dsp led status for PAD device */ -#define FT1000_DSP_CON_STATE 0x0FF8 /* DSP Connection Status Info */ -#define FT1000_DPRAM_FEFE 0x0002 /* location for dsp ready indicator */ -#define FT1000_DSP_TIMER0 0x1FF0 /* Timer Field from Basestation */ -#define FT1000_DSP_TIMER1 0x1FF2 /* Timer Field from Basestation */ -#define FT1000_DSP_TIMER2 0x1FF4 /* Timer Field from Basestation */ -#define FT1000_DSP_TIMER3 0x1FF6 /* Timer Field from Basestation */ - -/* Reserved Dual Port RAM offsets for Magnemite */ -#define FT1000_DPRAM_MAG_TX_BASE 0x0000 /* Host to PC Card - * Messaging Area - */ -#define FT1000_DPRAM_MAG_RX_BASE 0x0200 /* PC Card to Host - * Messaging Area - */ - -#define FT1000_MAG_FIFO_LEN 0x1FF /* total length for DSP - * FIFO tracking - */ -#define FT1000_MAG_FIFO_LEN_INDX 0x1 /* low-word index */ -#define FT1000_MAG_HI_HO 0x1FF /* heartbeat with HI/HO */ -#define FT1000_MAG_HI_HO_INDX 0x0 /* high-word index */ -#define FT1000_MAG_DSP_LED 0x3FE /* dsp led status for - * PAD device - */ -#define FT1000_MAG_DSP_LED_INDX 0x0 /* dsp led status for - * PAD device - */ -#define FT1000_MAG_DSP_CON_STATE 0x3FE /* DSP Connection Status Info */ -#define FT1000_MAG_DSP_CON_STATE_INDX 0x1 /* DSP Connection Status Info */ -#define FT1000_MAG_DPRAM_FEFE 0x000 /* location for dsp ready - * indicator - */ -#define FT1000_MAG_DPRAM_FEFE_INDX 0x0 /* location for dsp ready - * indicator - */ -#define FT1000_MAG_DSP_TIMER0 0x3FC /* Timer Field from - * Basestation - */ -#define FT1000_MAG_DSP_TIMER0_INDX 0x1 -#define FT1000_MAG_DSP_TIMER1 0x3FC /* Timer Field from - * Basestation - */ -#define FT1000_MAG_DSP_TIMER1_INDX 0x0 -#define FT1000_MAG_DSP_TIMER2 0x3FD /* Timer Field from - * Basestation - */ -#define FT1000_MAG_DSP_TIMER2_INDX 0x1 -#define FT1000_MAG_DSP_TIMER3 0x3FD /* Timer Field from - * Basestation - */ -#define FT1000_MAG_DSP_TIMER3_INDX 0x0 -#define FT1000_MAG_TOTAL_LEN 0x200 -#define FT1000_MAG_TOTAL_LEN_INDX 0x1 -#define FT1000_MAG_PH_LEN 0x200 -#define FT1000_MAG_PH_LEN_INDX 0x0 -#define FT1000_MAG_PORT_ID 0x201 -#define FT1000_MAG_PORT_ID_INDX 0x0 - -#define HOST_INTF_LE 0x0 /* Host interface little endian mode */ -#define HOST_INTF_BE 0x1 /* Host interface big endian mode */ - -/* FT1000 to Host Doorbell assignments */ -#define FT1000_DB_DPRAM_RX 0x0001 /* this value indicates that DSP - * has data for host in DPRAM - */ -#define FT1000_DB_DNLD_RX 0x0002 /* Downloader handshake doorbell */ -#define FT1000_ASIC_RESET_REQ 0x0004 /* DSP requesting host to - * reset the ASIC - */ -#define FT1000_DSP_ASIC_RESET 0x0008 /* DSP indicating host that - * it will reset the ASIC - */ -#define FT1000_DB_COND_RESET 0x0010 /* DSP request for a card reset. */ - -/* Host to FT1000 Doorbell assignments */ -#define FT1000_DB_DPRAM_TX 0x0100 /* this value indicates that host - * has data for DSP in DPRAM. - */ -#define FT1000_DB_DNLD_TX 0x0200 /* Downloader handshake doorbell */ -#define FT1000_ASIC_RESET_DSP 0x0400 /* Responds to FT1000_ASIC_RESET_REQ */ -#define FT1000_DB_HB 0x1000 /* Indicates that supervisor has a - * heartbeat message for DSP. - */ - -#define hi 0x6869 /* PC Card heartbeat values */ -#define ho 0x686f /* PC Card heartbeat values */ - -/* Magnemite specific defines */ -#define hi_mag 0x6968 /* Byte swap hi to avoid - * additional system call - */ -#define ho_mag 0x6f68 /* Byte swap ho to avoid - * additional system call - */ - -/* Bit field definitions for Host Interrupt Status Register */ -/* Indicate the cause of an interrupt. */ -#define ISR_EMPTY 0x00 /* no bits set */ -#define ISR_DOORBELL_ACK 0x01 /* Doorbell acknowledge from DSP */ -#define ISR_DOORBELL_PEND 0x02 /* Doorbell pending from DSP */ -#define ISR_RCV 0x04 /* Packet available in Downlink FIFO */ -#define ISR_WATERMARK 0x08 /* Watermark requirements satisfied */ - -/* Bit field definition for Host Interrupt Mask */ -#define ISR_MASK_NONE 0x0000 /* no bits set */ -#define ISR_MASK_DOORBELL_ACK 0x0001 /* Doorbell acknowledge mask */ -#define ISR_MASK_DOORBELL_PEND 0x0002 /* Doorbell pending mask */ -#define ISR_MASK_RCV 0x0004 /* Downlink Packet available mask */ -#define ISR_MASK_WATERMARK 0x0008 /* Watermark interrupt mask */ -#define ISR_MASK_ALL 0xffff /* Mask all interrupts */ -/* Default interrupt mask - * (Enable Doorbell pending and Packet available interrupts) - */ -#define ISR_DEFAULT_MASK 0x7ff9 - -/* Bit field definition for Host Control Register */ -#define DSP_RESET_BIT 0x0001 /* Bit field to control - * dsp reset state - */ - /* (0 = out of reset 1 = reset) */ -#define ASIC_RESET_BIT 0x0002 /* Bit field to control - * ASIC reset state - */ - /* (0 = out of reset 1 = reset) */ -#define DSP_UNENCRYPTED 0x0004 -#define DSP_ENCRYPTED 0x0008 -#define EFUSE_MEM_DISABLE 0x0040 - -/* Application specific IDs */ -#define DSPID 0x20 -#define HOSTID 0x10 -#define DSPAIRID 0x90 -#define DRIVERID 0x00 -#define NETWORKID 0x20 - -/* Size of DPRAM Message */ -#define MAX_CMD_SQSIZE 1780 - -#define ENET_MAX_SIZE 1514 -#define ENET_HEADER_SIZE 14 - -#define SLOWQ_TYPE 0 -#define FASTQ_TYPE 1 - -#define MAX_DSP_SESS_REC 1024 - -#define DSP_QID_OFFSET 4 - -/* Driver message types */ -#define MEDIA_STATE 0x0010 -#define TIME_UPDATE 0x0020 -#define DSP_PROVISION 0x0030 -#define DSP_INIT_MSG 0x0050 -#define DSP_HIBERNATE 0x0060 -#define DSP_STORE_INFO 0x0070 -#define DSP_GET_INFO 0x0071 -#define GET_DRV_ERR_RPT_MSG 0x0073 -#define RSP_DRV_ERR_RPT_MSG 0x0074 - -/* Driver Error Messages for DSP */ -#define DSP_HB_INFO 0x7ef0 -#define DSP_FIFO_INFO 0x7ef1 -#define DSP_CONDRESET_INFO 0x7ef2 -#define DSP_CMDLEN_INFO 0x7ef3 -#define DSP_CMDPHCKSUM_INFO 0x7ef4 -#define DSP_PKTPHCKSUM_INFO 0x7ef5 -#define DSP_PKTLEN_INFO 0x7ef6 -#define DSP_USER_RESET 0x7ef7 -#define FIFO_FLUSH_MAXLIMIT 0x7ef8 -#define FIFO_FLUSH_BADCNT 0x7ef9 -#define FIFO_ZERO_LEN 0x7efa - -/* Pseudo Header structure */ -struct pseudo_hdr { - unsigned short length; /* length of msg body */ - unsigned char source; /* hardware source id */ - /* Host = 0x10 */ - /* Dsp = 0x20 */ - unsigned char destination; /* hardware destination id - * (refer to source) - */ - unsigned char portdest; /* software destination port id */ - /* Host = 0x00 */ - /* Applicaton Broadcast = 0x10 */ - /* Network Stack = 0x20 */ - /* Dsp OAM = 0x80 */ - /* Dsp Airlink = 0x90 */ - /* Dsp Loader = 0xa0 */ - /* Dsp MIP = 0xb0 */ - unsigned char portsrc; /* software source port id - * (refer to portdest) - */ - unsigned short sh_str_id; /* not used */ - unsigned char control; /* not used */ - unsigned char rsvd1; - unsigned char seq_num; /* message sequence number */ - unsigned char rsvd2; - unsigned short qos_class; /* not used */ - unsigned short checksum; /* pseudo header checksum */ -} __packed; - -struct drv_msg { - struct pseudo_hdr pseudo; - u16 type; - u16 length; - u8 data[0]; -} __packed; - -struct media_msg { - struct pseudo_hdr pseudo; - u16 type; - u16 length; - u16 state; - u32 ip_addr; - u32 net_mask; - u32 gateway; - u32 dns_1; - u32 dns_2; -} __packed; - -struct dsp_init_msg { - struct pseudo_hdr pseudo; - u16 type; - u16 length; - u8 DspVer[DSPVERSZ]; /* DSP version number */ - u8 HwSerNum[HWSERNUMSZ]; /* Hardware Serial Number */ - u8 Sku[SKUSZ]; /* SKU */ - u8 eui64[EUISZ]; /* EUI64 */ - u8 ProductMode[MODESZ]; /* Product Mode (Market/Production) */ - u8 RfCalVer[CALVERSZ]; /* Rf Calibration version */ - u8 RfCalDate[CALDATESZ]; /* Rf Calibration date */ -} __packed; - -struct prov_record { - struct list_head list; - u8 *pprov_data; -}; - -struct ft1000_info { - void *priv; - struct net_device_stats stats; - u16 DrvErrNum; - u16 AsicID; - int CardReady; - int registered; - int mediastate; - u8 squeseqnum; /* sequence number on slow queue */ - spinlock_t dpram_lock; - u16 fifo_cnt; - u8 DspVer[DSPVERSZ]; /* DSP version number */ - u8 HwSerNum[HWSERNUMSZ]; /* Hardware Serial Number */ - u8 Sku[SKUSZ]; /* SKU */ - u8 eui64[EUISZ]; /* EUI64 */ - time_t ConTm; /* Connection Time */ - u8 ProductMode[MODESZ]; - u8 RfCalVer[CALVERSZ]; - u8 RfCalDate[CALDATESZ]; - u16 DSP_TIME[4]; - u16 LedStat; - u16 ConStat; - u16 ProgConStat; - struct list_head prov_list; - u16 DSPInfoBlklen; - int (*ft1000_reset)(void *); - u16 DSPInfoBlk[MAX_DSP_SESS_REC]; - union { - u16 Rec[MAX_DSP_SESS_REC]; - u32 MagRec[MAX_DSP_SESS_REC/2]; - } DSPSess; -}; |