diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/staging/gma500/mdfld_dsi_dbi_dpu.c | 778 |
1 files changed, 0 insertions, 778 deletions
diff --git a/drivers/staging/gma500/mdfld_dsi_dbi_dpu.c b/drivers/staging/gma500/mdfld_dsi_dbi_dpu.c deleted file mode 100644 index a4e2ff442b1f..000000000000 --- a/drivers/staging/gma500/mdfld_dsi_dbi_dpu.c +++ /dev/null @@ -1,778 +0,0 @@ -/* - * Copyright © 2010-2011 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Jim Liu <jim.liu@intel.com> - * Jackie Li<yaodong.li@intel.com> - */ - -#include "mdfld_dsi_dbi_dpu.h" -#include "mdfld_dsi_dbi.h" - -/* - * NOTE: all mdlfd_x_damage funcs should be called by holding dpu_update_lock - */ - -static int mdfld_cursor_damage(struct mdfld_dbi_dpu_info *dpu_info, - mdfld_plane_t plane, - struct psb_drm_dpu_rect *damaged_rect) -{ - int x, y; - int new_x, new_y; - struct psb_drm_dpu_rect *rect; - struct psb_drm_dpu_rect *pipe_rect; - int cursor_size; - struct mdfld_cursor_info *cursor; - mdfld_plane_t fb_plane; - - if (plane == MDFLD_CURSORA) { - cursor = &dpu_info->cursors[0]; - x = dpu_info->cursors[0].x; - y = dpu_info->cursors[0].y; - cursor_size = dpu_info->cursors[0].size; - pipe_rect = &dpu_info->damage_pipea; - fb_plane = MDFLD_PLANEA; - } else { - cursor = &dpu_info->cursors[1]; - x = dpu_info->cursors[1].x; - y = dpu_info->cursors[1].y; - cursor_size = dpu_info->cursors[1].size; - pipe_rect = &dpu_info->damage_pipec; - fb_plane = MDFLD_PLANEC; - } - new_x = damaged_rect->x; - new_y = damaged_rect->y; - - if (x == new_x && y == new_y) - return 0; - - rect = &dpu_info->damaged_rects[plane]; - /* Move to right */ - if (new_x >= x) { - if (new_y > y) { - rect->x = x; - rect->y = y; - rect->width = (new_x + cursor_size) - x; - rect->height = (new_y + cursor_size) - y; - goto cursor_out; - } else { - rect->x = x; - rect->y = new_y; - rect->width = (new_x + cursor_size) - x; - rect->height = (y - new_y); - goto cursor_out; - } - } else { - if (new_y > y) { - rect->x = new_x; - rect->y = y; - rect->width = (x + cursor_size) - new_x; - rect->height = new_y - y; - goto cursor_out; - } else { - rect->x = new_x; - rect->y = new_y; - rect->width = (x + cursor_size) - new_x; - rect->height = (y + cursor_size) - new_y; - } - } -cursor_out: - if (new_x < 0) - cursor->x = 0; - else if (new_x > 864) - cursor->x = 864; - else - cursor->x = new_x; - - if (new_y < 0) - cursor->y = 0; - else if (new_y > 480) - cursor->y = 480; - else - cursor->y = new_y; - - /* - * FIXME: this is a workaround for cursor plane update, - * remove it later! - */ - rect->x = 0; - rect->y = 0; - rect->width = 864; - rect->height = 480; - - mdfld_check_boundary(dpu_info, rect); - mdfld_dpu_region_extent(pipe_rect, rect); - - /* Update pending status of dpu_info */ - dpu_info->pending |= (1 << plane); - /* Update fb panel as well */ - dpu_info->pending |= (1 << fb_plane); - return 0; -} - -static int mdfld_fb_damage(struct mdfld_dbi_dpu_info *dpu_info, - mdfld_plane_t plane, - struct psb_drm_dpu_rect *damaged_rect) -{ - struct psb_drm_dpu_rect *rect; - - if (plane == MDFLD_PLANEA) - rect = &dpu_info->damage_pipea; - else - rect = &dpu_info->damage_pipec; - - mdfld_check_boundary(dpu_info, damaged_rect); - - /* Add fb damage area to this pipe */ - mdfld_dpu_region_extent(rect, damaged_rect); - - /* Update pending status of dpu_info */ - dpu_info->pending |= (1 << plane); - return 0; -} - -/* Do nothing here, right now */ -static int mdfld_overlay_damage(struct mdfld_dbi_dpu_info *dpu_info, - mdfld_plane_t plane, - struct psb_drm_dpu_rect *damaged_rect) -{ - return 0; -} - -int mdfld_dbi_dpu_report_damage(struct drm_device *dev, - mdfld_plane_t plane, - struct psb_drm_dpu_rect *rect) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - int ret = 0; - - /* DPU not in use, no damage reporting needed */ - if (dpu_info == NULL) - return 0; - - spin_lock(&dpu_info->dpu_update_lock); - - switch (plane) { - case MDFLD_PLANEA: - case MDFLD_PLANEC: - mdfld_fb_damage(dpu_info, plane, rect); - break; - case MDFLD_CURSORA: - case MDFLD_CURSORC: - mdfld_cursor_damage(dpu_info, plane, rect); - break; - case MDFLD_OVERLAYA: - case MDFLD_OVERLAYC: - mdfld_overlay_damage(dpu_info, plane, rect); - break; - default: - DRM_ERROR("Invalid plane type %d\n", plane); - ret = -EINVAL; - } - spin_unlock(&dpu_info->dpu_update_lock); - return ret; -} - -int mdfld_dbi_dpu_report_fullscreen_damage(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv; - struct mdfld_dbi_dpu_info *dpu_info; - struct mdfld_dsi_config *dsi_config; - struct psb_drm_dpu_rect rect; - int i; - - if (!dev) { - DRM_ERROR("Invalid parameter\n"); - return -EINVAL; - } - - dev_priv = dev->dev_private; - dpu_info = dev_priv->dbi_dpu_info; - - /* This is fine - we may be in non DPU mode */ - if (!dpu_info) - return -EINVAL; - - for (i = 0; i < dpu_info->dbi_output_num; i++) { - dsi_config = dev_priv->dsi_configs[i]; - if (dsi_config) { - rect.x = rect.y = 0; - rect.width = dsi_config->fixed_mode->hdisplay; - rect.height = dsi_config->fixed_mode->vdisplay; - mdfld_dbi_dpu_report_damage(dev, - i ? (MDFLD_PLANEC) : (MDFLD_PLANEA), - &rect); - } - } - /* Exit DSR state */ - mdfld_dpu_exit_dsr(dev); - return 0; -} - -int mdfld_dsi_dbi_dsr_off(struct drm_device *dev, - struct psb_drm_dpu_rect *rect) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - - mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEA, rect); - - /* If dual display mode */ - if (dpu_info->dbi_output_num == 2) - mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEC, rect); - - /* Force dsi to exit DSR mode */ - mdfld_dpu_exit_dsr(dev); - return 0; -} - -static void mdfld_dpu_cursor_plane_flush(struct mdfld_dbi_dpu_info *dpu_info, - mdfld_plane_t plane) -{ - struct drm_device *dev = dpu_info->dev; - u32 curpos_reg = CURAPOS; - u32 curbase_reg = CURABASE; - u32 curcntr_reg = CURACNTR; - struct mdfld_cursor_info *cursor = &dpu_info->cursors[0]; - - if (plane == MDFLD_CURSORC) { - curpos_reg = CURCPOS; - curbase_reg = CURCBASE; - curcntr_reg = CURCCNTR; - cursor = &dpu_info->cursors[1]; - } - - REG_WRITE(curcntr_reg, REG_READ(curcntr_reg)); - REG_WRITE(curpos_reg, - (((cursor->x & CURSOR_POS_MASK) << CURSOR_X_SHIFT) | - ((cursor->y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT))); - REG_WRITE(curbase_reg, REG_READ(curbase_reg)); -} - -static void mdfld_dpu_fb_plane_flush(struct mdfld_dbi_dpu_info *dpu_info, - mdfld_plane_t plane) -{ - u32 pipesrc_reg = PIPEASRC; - u32 dspsize_reg = DSPASIZE; - u32 dspoff_reg = DSPALINOFF; - u32 dspsurf_reg = DSPASURF; - u32 dspstride_reg = DSPASTRIDE; - u32 stride; - struct psb_drm_dpu_rect *rect = &dpu_info->damage_pipea; - struct drm_device *dev = dpu_info->dev; - - if (plane == MDFLD_PLANEC) { - pipesrc_reg = PIPECSRC; - dspsize_reg = DSPCSIZE; - dspoff_reg = DSPCLINOFF; - dspsurf_reg = DSPCSURF; - dspstride_reg = DSPCSTRIDE; - rect = &dpu_info->damage_pipec; - } - - stride = REG_READ(dspstride_reg); - /* FIXME: should I do the pipe src update here? */ - REG_WRITE(pipesrc_reg, ((rect->width - 1) << 16) | (rect->height - 1)); - /* Flush plane */ - REG_WRITE(dspsize_reg, ((rect->height - 1) << 16) | (rect->width - 1)); - REG_WRITE(dspoff_reg, ((rect->x * 4) + (rect->y * stride))); - REG_WRITE(dspsurf_reg, REG_READ(dspsurf_reg)); - - /* - * TODO: wait for flip finished and restore the pipesrc reg, - * or cursor will be show at a wrong position - */ -} - -static void mdfld_dpu_overlay_plane_flush(struct mdfld_dbi_dpu_info *dpu_info, - mdfld_plane_t plane) -{ -} - -/* - * TODO: we are still in dbi normal mode now, we will try to use partial - * mode later. - */ -static int mdfld_dbi_prepare_cb(struct mdfld_dsi_dbi_output *dbi_output, - struct mdfld_dbi_dpu_info *dpu_info, int pipe) -{ - u8 *cb_addr = (u8 *)dbi_output->dbi_cb_addr; - u32 *index; - struct psb_drm_dpu_rect *rect = pipe ? - (&dpu_info->damage_pipec) : (&dpu_info->damage_pipea); - - /* FIXME: lock command buffer, this may lead to a deadlock, - as we already hold the dpu_update_lock */ - if (!spin_trylock(&dbi_output->cb_lock)) { - DRM_ERROR("lock command buffer failed, try again\n"); - return -EAGAIN; - } - - index = &dbi_output->cb_write; - - if (*index) { - DRM_ERROR("DBI command buffer unclean\n"); - return -EAGAIN; - } - - /* Column address */ - *(cb_addr + ((*index)++)) = set_column_address; - *(cb_addr + ((*index)++)) = rect->x >> 8; - *(cb_addr + ((*index)++)) = rect->x; - *(cb_addr + ((*index)++)) = (rect->x + rect->width - 1) >> 8; - *(cb_addr + ((*index)++)) = (rect->x + rect->width - 1); - - *index = 8; - - /* Page address */ - *(cb_addr + ((*index)++)) = set_page_addr; - *(cb_addr + ((*index)++)) = rect->y >> 8; - *(cb_addr + ((*index)++)) = rect->y; - *(cb_addr + ((*index)++)) = (rect->y + rect->height - 1) >> 8; - *(cb_addr + ((*index)++)) = (rect->y + rect->height - 1); - - *index = 16; - - /*write memory*/ - *(cb_addr + ((*index)++)) = write_mem_start; - - return 0; -} - -static int mdfld_dbi_flush_cb(struct mdfld_dsi_dbi_output *dbi_output, int pipe) -{ - u32 cmd_phy = dbi_output->dbi_cb_phy; - u32 *index = &dbi_output->cb_write; - int reg_offset = pipe ? MIPIC_REG_OFFSET : 0; - struct drm_device *dev = dbi_output->dev; - - if (*index == 0 || !dbi_output) - return 0; - - REG_WRITE((MIPIA_CMD_LEN_REG + reg_offset), 0x010505); - REG_WRITE((MIPIA_CMD_ADD_REG + reg_offset), cmd_phy | 3); - - *index = 0; - - /* FIXME: unlock command buffer */ - spin_unlock(&dbi_output->cb_lock); - return 0; -} - -static int mdfld_dpu_update_pipe(struct mdfld_dsi_dbi_output *dbi_output, - struct mdfld_dbi_dpu_info *dpu_info, int pipe) -{ - struct drm_device *dev = dbi_output->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - mdfld_plane_t cursor_plane = MDFLD_CURSORA; - mdfld_plane_t fb_plane = MDFLD_PLANEA; - mdfld_plane_t overlay_plane = MDFLD_OVERLAYA; - int ret = 0; - u32 plane_mask = MDFLD_PIPEA_PLANE_MASK; - - /* Damaged rects on this pipe */ - if (pipe) { - cursor_plane = MDFLD_CURSORC; - fb_plane = MDFLD_PLANEC; - overlay_plane = MDFLD_OVERLAYC; - plane_mask = MDFLD_PIPEC_PLANE_MASK; - } - - /*update cursor which assigned to @pipe*/ - if (dpu_info->pending & (1 << cursor_plane)) - mdfld_dpu_cursor_plane_flush(dpu_info, cursor_plane); - - /*update fb which assigned to @pipe*/ - if (dpu_info->pending & (1 << fb_plane)) - mdfld_dpu_fb_plane_flush(dpu_info, fb_plane); - - /* TODO: update overlay */ - if (dpu_info->pending & (1 << overlay_plane)) - mdfld_dpu_overlay_plane_flush(dpu_info, overlay_plane); - - /* Flush damage area to panel fb */ - if (dpu_info->pending & plane_mask) { - ret = mdfld_dbi_prepare_cb(dbi_output, dpu_info, pipe); - /* - * TODO: remove b_dsr_enable later, - * added it so that text console could boot smoothly - */ - /* Clean pending flags on this pipe */ - if (!ret && dev_priv->dsr_enable) { - dpu_info->pending &= ~plane_mask; - /* Reset overlay pipe damage rect */ - mdfld_dpu_init_damage(dpu_info, pipe); - } - } - return ret; -} - -static int mdfld_dpu_update_fb(struct drm_device *dev) -{ - struct drm_crtc *crtc; - struct psb_intel_crtc *psb_crtc; - struct mdfld_dsi_dbi_output **dbi_output; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - bool pipe_updated[2]; - unsigned long irq_flags; - u32 dpll_reg = MRST_DPLL_A; - u32 dspcntr_reg = DSPACNTR; - u32 pipeconf_reg = PIPEACONF; - u32 dsplinoff_reg = DSPALINOFF; - u32 dspsurf_reg = DSPASURF; - u32 mipi_state_reg = MIPIA_INTR_STAT_REG; - u32 reg_offset = 0; - int pipe; - int i; - int ret; - - dbi_output = dpu_info->dbi_outputs; - pipe_updated[0] = pipe_updated[1] = false; - - if (!gma_power_begin(dev, true)) - return -EAGAIN; - - /* Try to prevent any new damage reports */ - if (!spin_trylock_irqsave(&dpu_info->dpu_update_lock, irq_flags)) - return -EAGAIN; - - for (i = 0; i < dpu_info->dbi_output_num; i++) { - crtc = dbi_output[i]->base.base.crtc; - psb_crtc = (crtc) ? to_psb_intel_crtc(crtc) : NULL; - - pipe = dbi_output[i]->channel_num ? 2 : 0; - - if (pipe == 2) { - dspcntr_reg = DSPCCNTR; - pipeconf_reg = PIPECCONF; - dsplinoff_reg = DSPCLINOFF; - dspsurf_reg = DSPCSURF; - reg_offset = MIPIC_REG_OFFSET; - } - - if (!(REG_READ((MIPIA_GEN_FIFO_STAT_REG + reg_offset)) - & (1 << 27)) || - !(REG_READ(dpll_reg) & DPLL_VCO_ENABLE) || - !(REG_READ(dspcntr_reg) & DISPLAY_PLANE_ENABLE) || - !(REG_READ(pipeconf_reg) & DISPLAY_PLANE_ENABLE)) { - dev_err(dev->dev, - "DBI FIFO is busy, DSI %d state %x\n", - pipe, - REG_READ(mipi_state_reg + reg_offset)); - continue; - } - - /* - * If DBI output is in a exclusive state then the pipe - * change won't be updated - */ - if (dbi_output[i]->dbi_panel_on && - !(dbi_output[i]->mode_flags & MODE_SETTING_ON_GOING) && - !(psb_crtc && - psb_crtc->mode_flags & MODE_SETTING_ON_GOING) && - !(dbi_output[i]->mode_flags & MODE_SETTING_IN_DSR)) { - ret = mdfld_dpu_update_pipe(dbi_output[i], - dpu_info, dbi_output[i]->channel_num ? 2 : 0); - if (!ret) - pipe_updated[i] = true; - } - } - - for (i = 0; i < dpu_info->dbi_output_num; i++) - if (pipe_updated[i]) - mdfld_dbi_flush_cb(dbi_output[i], - dbi_output[i]->channel_num ? 2 : 0); - - spin_unlock_irqrestore(&dpu_info->dpu_update_lock, irq_flags); - gma_power_end(dev); - return 0; -} - -static int __mdfld_dbi_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output, - int pipe) -{ - struct drm_device *dev = dbi_output->dev; - struct drm_crtc *crtc = dbi_output->base.base.crtc; - struct psb_intel_crtc *psb_crtc = (crtc) ? to_psb_intel_crtc(crtc) - : NULL; - u32 reg_val; - u32 dpll_reg = MRST_DPLL_A; - u32 pipeconf_reg = PIPEACONF; - u32 dspcntr_reg = DSPACNTR; - u32 dspbase_reg = DSPABASE; - u32 dspsurf_reg = DSPASURF; - u32 reg_offset = 0; - - if (!dbi_output) - return 0; - - /* If mode setting on-going, back off */ - if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) || - (psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING)) - return -EAGAIN; - - if (pipe == 2) { - dpll_reg = MRST_DPLL_A; - pipeconf_reg = PIPECCONF; - dspcntr_reg = DSPCCNTR; - dspbase_reg = MDFLD_DSPCBASE; - dspsurf_reg = DSPCSURF; - - reg_offset = MIPIC_REG_OFFSET; - } - - if (!gma_power_begin(dev, true)) - return -EAGAIN; - - /* Enable DPLL */ - reg_val = REG_READ(dpll_reg); - if (!(reg_val & DPLL_VCO_ENABLE)) { - - if (reg_val & MDFLD_PWR_GATE_EN) { - reg_val &= ~MDFLD_PWR_GATE_EN; - REG_WRITE(dpll_reg, reg_val); - REG_READ(dpll_reg); - udelay(500); - } - - reg_val |= DPLL_VCO_ENABLE; - REG_WRITE(dpll_reg, reg_val); - REG_READ(dpll_reg); - udelay(500); - - /* FIXME: add timeout */ - while (!(REG_READ(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) - cpu_relax(); - } - - /* Enable pipe */ - reg_val = REG_READ(pipeconf_reg); - if (!(reg_val & PIPEACONF_ENABLE)) { - reg_val |= PIPEACONF_ENABLE; - REG_WRITE(pipeconf_reg, reg_val); - REG_READ(pipeconf_reg); - udelay(500); - mdfldWaitForPipeEnable(dev, pipe); - } - - /* Enable plane */ - reg_val = REG_READ(dspcntr_reg); - if (!(reg_val & DISPLAY_PLANE_ENABLE)) { - reg_val |= DISPLAY_PLANE_ENABLE; - REG_WRITE(dspcntr_reg, reg_val); - REG_READ(dspcntr_reg); - udelay(500); - } - - gma_power_end(dev); - - /* Clean IN_DSR flag */ - dbi_output->mode_flags &= ~MODE_SETTING_IN_DSR; - - return 0; -} - -int mdfld_dpu_exit_dsr(struct drm_device *dev) -{ - struct mdfld_dsi_dbi_output **dbi_output; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - int i; - int pipe; - - dbi_output = dpu_info->dbi_outputs; - - for (i = 0; i < dpu_info->dbi_output_num; i++) { - /* If this output is not in DSR mode, don't call exit dsr */ - if (dbi_output[i]->mode_flags & MODE_SETTING_IN_DSR) - __mdfld_dbi_exit_dsr(dbi_output[i], - dbi_output[i]->channel_num ? 2 : 0); - } - - /* Enable TE interrupt */ - for (i = 0; i < dpu_info->dbi_output_num; i++) { - /* If this output is not in DSR mode, don't call exit dsr */ - pipe = dbi_output[i]->channel_num ? 2 : 0; - if (dbi_output[i]->dbi_panel_on && pipe) { - mdfld_disable_te(dev, 0); - mdfld_enable_te(dev, 2); - } else if (dbi_output[i]->dbi_panel_on && !pipe) { - mdfld_disable_te(dev, 2); - mdfld_enable_te(dev, 0); - } - } - return 0; -} - -static int mdfld_dpu_enter_dsr(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - struct mdfld_dsi_dbi_output **dbi_output; - int i; - - dbi_output = dpu_info->dbi_outputs; - - for (i = 0; i < dpu_info->dbi_output_num; i++) { - /* If output is off or already in DSR state, don't re-enter */ - if (dbi_output[i]->dbi_panel_on && - !(dbi_output[i]->mode_flags & MODE_SETTING_IN_DSR)) { - mdfld_dsi_dbi_enter_dsr(dbi_output[i], - dbi_output[i]->channel_num ? 2 : 0); - } - } - - return 0; -} - -static void mdfld_dbi_dpu_timer_func(unsigned long data) -{ - struct drm_device *dev = (struct drm_device *)data; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - struct timer_list *dpu_timer = &dpu_info->dpu_timer; - unsigned long flags; - - if (dpu_info->pending) { - dpu_info->idle_count = 0; - /* Update panel fb with damaged area */ - mdfld_dpu_update_fb(dev); - } else { - dpu_info->idle_count++; - } - - if (dpu_info->idle_count >= MDFLD_MAX_IDLE_COUNT) { - mdfld_dpu_enter_dsr(dev); - /* Stop timer by return */ - return; - } - - spin_lock_irqsave(&dpu_info->dpu_timer_lock, flags); - if (!timer_pending(dpu_timer)) { - dpu_timer->expires = jiffies + MDFLD_DSR_DELAY; - add_timer(dpu_timer); - } - spin_unlock_irqrestore(&dpu_info->dpu_timer_lock, flags); -} - -void mdfld_dpu_update_panel(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - - if (dpu_info->pending) { - dpu_info->idle_count = 0; - - /*update panel fb with damaged area*/ - mdfld_dpu_update_fb(dev); - } else { - dpu_info->idle_count++; - } - - if (dpu_info->idle_count >= MDFLD_MAX_IDLE_COUNT) { - /*enter dsr*/ - mdfld_dpu_enter_dsr(dev); - } -} - -static int mdfld_dbi_dpu_timer_init(struct drm_device *dev, - struct mdfld_dbi_dpu_info *dpu_info) -{ - struct timer_list *dpu_timer = &dpu_info->dpu_timer; - unsigned long flags; - - spin_lock_init(&dpu_info->dpu_timer_lock); - spin_lock_irqsave(&dpu_info->dpu_timer_lock, flags); - - init_timer(dpu_timer); - - dpu_timer->data = (unsigned long)dev; - dpu_timer->function = mdfld_dbi_dpu_timer_func; - dpu_timer->expires = jiffies + MDFLD_DSR_DELAY; - - spin_unlock_irqrestore(&dpu_info->dpu_timer_lock, flags); - - return 0; -} - -void mdfld_dbi_dpu_timer_start(struct mdfld_dbi_dpu_info *dpu_info) -{ - struct timer_list *dpu_timer = &dpu_info->dpu_timer; - unsigned long flags; - - spin_lock_irqsave(&dpu_info->dpu_timer_lock, flags); - if (!timer_pending(dpu_timer)) { - dpu_timer->expires = jiffies + MDFLD_DSR_DELAY; - add_timer(dpu_timer); - } - spin_unlock_irqrestore(&dpu_info->dpu_timer_lock, flags); -} - -int mdfld_dbi_dpu_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - - if (!dpu_info || IS_ERR(dpu_info)) { - dpu_info = kzalloc(sizeof(struct mdfld_dbi_dpu_info), - GFP_KERNEL); - if (!dpu_info) { - DRM_ERROR("No memory\n"); - return -ENOMEM; - } - dev_priv->dbi_dpu_info = dpu_info; - } - - dpu_info->dev = dev; - - dpu_info->cursors[0].size = MDFLD_CURSOR_SIZE; - dpu_info->cursors[1].size = MDFLD_CURSOR_SIZE; - - /*init dpu_update_lock*/ - spin_lock_init(&dpu_info->dpu_update_lock); - - /*init dpu refresh timer*/ - mdfld_dbi_dpu_timer_init(dev, dpu_info); - - /*init pipe damage area*/ - mdfld_dpu_init_damage(dpu_info, 0); - mdfld_dpu_init_damage(dpu_info, 2); - - return 0; -} - -void mdfld_dbi_dpu_exit(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dpu_info *dpu_info = dev_priv->dbi_dpu_info; - - if (!dpu_info) - return; - - del_timer_sync(&dpu_info->dpu_timer); - kfree(dpu_info); - dev_priv->dbi_dpu_info = NULL; -} - - |