diff options
Diffstat (limited to 'drivers/staging/i2o/debug.c')
| -rw-r--r-- | drivers/staging/i2o/debug.c | 472 |
1 files changed, 472 insertions, 0 deletions
diff --git a/drivers/staging/i2o/debug.c b/drivers/staging/i2o/debug.c new file mode 100644 index 000000000000..7a16114ed8ea --- /dev/null +++ b/drivers/staging/i2o/debug.c @@ -0,0 +1,472 @@ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include "i2o.h" + +static void i2o_report_util_cmd(u8 cmd); +static void i2o_report_exec_cmd(u8 cmd); +static void i2o_report_fail_status(u8 req_status, u32 * msg); +static void i2o_report_common_status(u8 req_status); +static void i2o_report_common_dsc(u16 detailed_status); + +/* + * Used for error reporting/debugging purposes. + * Report Cmd name, Request status, Detailed Status. + */ +void i2o_report_status(const char *severity, const char *str, + struct i2o_message *m) +{ + u32 *msg = (u32 *) m; + u8 cmd = (msg[1] >> 24) & 0xFF; + u8 req_status = (msg[4] >> 24) & 0xFF; + u16 detailed_status = msg[4] & 0xFFFF; + + if (cmd == I2O_CMD_UTIL_EVT_REGISTER) + return; // No status in this reply + + printk("%s%s: ", severity, str); + + if (cmd < 0x1F) // Utility cmd + i2o_report_util_cmd(cmd); + + else if (cmd >= 0xA0 && cmd <= 0xEF) // Executive cmd + i2o_report_exec_cmd(cmd); + else + printk("Cmd = %0#2x, ", cmd); // Other cmds + + if (msg[0] & MSG_FAIL) { + i2o_report_fail_status(req_status, msg); + return; + } + + i2o_report_common_status(req_status); + + if (cmd < 0x1F || (cmd >= 0xA0 && cmd <= 0xEF)) + i2o_report_common_dsc(detailed_status); + else + printk(" / DetailedStatus = %0#4x.\n", + detailed_status); +} + +/* Used to dump a message to syslog during debugging */ +void i2o_dump_message(struct i2o_message *m) +{ +#ifdef DEBUG + u32 *msg = (u32 *) m; + int i; + printk(KERN_INFO "Dumping I2O message size %d @ %p\n", + msg[0] >> 16 & 0xffff, msg); + for (i = 0; i < ((msg[0] >> 16) & 0xffff); i++) + printk(KERN_INFO " msg[%d] = %0#10x\n", i, msg[i]); +#endif +} + +/* + * Used for error reporting/debugging purposes. + * Following fail status are common to all classes. + * The preserved message must be handled in the reply handler. + */ +static void i2o_report_fail_status(u8 req_status, u32 * msg) +{ + static char *FAIL_STATUS[] = { + "0x80", /* not used */ + "SERVICE_SUSPENDED", /* 0x81 */ + "SERVICE_TERMINATED", /* 0x82 */ + "CONGESTION", + "FAILURE", + "STATE_ERROR", + "TIME_OUT", + "ROUTING_FAILURE", + "INVALID_VERSION", + "INVALID_OFFSET", + "INVALID_MSG_FLAGS", + "FRAME_TOO_SMALL", + "FRAME_TOO_LARGE", + "INVALID_TARGET_ID", + "INVALID_INITIATOR_ID", + "INVALID_INITIATOR_CONTEX", /* 0x8F */ + "UNKNOWN_FAILURE" /* 0xFF */ + }; + + if (req_status == I2O_FSC_TRANSPORT_UNKNOWN_FAILURE) + printk("TRANSPORT_UNKNOWN_FAILURE (%0#2x).\n", + req_status); + else + printk("TRANSPORT_%s.\n", + FAIL_STATUS[req_status & 0x0F]); + + /* Dump some details */ + + printk(KERN_ERR " InitiatorId = %d, TargetId = %d\n", + (msg[1] >> 12) & 0xFFF, msg[1] & 0xFFF); + printk(KERN_ERR " LowestVersion = 0x%02X, HighestVersion = 0x%02X\n", + (msg[4] >> 8) & 0xFF, msg[4] & 0xFF); + printk(KERN_ERR " FailingHostUnit = 0x%04X, FailingIOP = 0x%03X\n", + msg[5] >> 16, msg[5] & 0xFFF); + + printk(KERN_ERR " Severity: 0x%02X\n", (msg[4] >> 16) & 0xFF); + if (msg[4] & (1 << 16)) + printk(KERN_DEBUG "(FormatError), " + "this msg can never be delivered/processed.\n"); + if (msg[4] & (1 << 17)) + printk(KERN_DEBUG "(PathError), " + "this msg can no longer be delivered/processed.\n"); + if (msg[4] & (1 << 18)) + printk(KERN_DEBUG "(PathState), " + "the system state does not allow delivery.\n"); + if (msg[4] & (1 << 19)) + printk(KERN_DEBUG + "(Congestion), resources temporarily not available;" + "do not retry immediately.\n"); +} + +/* + * Used for error reporting/debugging purposes. + * Following reply status are common to all classes. + */ +static void i2o_report_common_status(u8 req_status) +{ + static char *REPLY_STATUS[] = { + "SUCCESS", + "ABORT_DIRTY", + "ABORT_NO_DATA_TRANSFER", + "ABORT_PARTIAL_TRANSFER", + "ERROR_DIRTY", + "ERROR_NO_DATA_TRANSFER", + "ERROR_PARTIAL_TRANSFER", + "PROCESS_ABORT_DIRTY", + "PROCESS_ABORT_NO_DATA_TRANSFER", + "PROCESS_ABORT_PARTIAL_TRANSFER", + "TRANSACTION_ERROR", + "PROGRESS_REPORT" + }; + + if (req_status >= ARRAY_SIZE(REPLY_STATUS)) + printk("RequestStatus = %0#2x", req_status); + else + printk("%s", REPLY_STATUS[req_status]); +} + +/* + * Used for error reporting/debugging purposes. + * Following detailed status are valid for executive class, + * utility class, DDM class and for transaction error replies. + */ +static void i2o_report_common_dsc(u16 detailed_status) +{ + static char *COMMON_DSC[] = { + "SUCCESS", + "0x01", // not used + "BAD_KEY", + "TCL_ERROR", + "REPLY_BUFFER_FULL", + "NO_SUCH_PAGE", + "INSUFFICIENT_RESOURCE_SOFT", + "INSUFFICIENT_RESOURCE_HARD", + "0x08", // not used + "CHAIN_BUFFER_TOO_LARGE", + "UNSUPPORTED_FUNCTION", + "DEVICE_LOCKED", + "DEVICE_RESET", + "INAPPROPRIATE_FUNCTION", + "INVALID_INITIATOR_ADDRESS", + "INVALID_MESSAGE_FLAGS", + "INVALID_OFFSET", + "INVALID_PARAMETER", + "INVALID_REQUEST", + "INVALID_TARGET_ADDRESS", + "MESSAGE_TOO_LARGE", + "MESSAGE_TOO_SMALL", + "MISSING_PARAMETER", + "TIMEOUT", + "UNKNOWN_ERROR", + "UNKNOWN_FUNCTION", + "UNSUPPORTED_VERSION", + "DEVICE_BUSY", + "DEVICE_NOT_AVAILABLE" + }; + + if (detailed_status > I2O_DSC_DEVICE_NOT_AVAILABLE) + printk(" / DetailedStatus = %0#4x.\n", + detailed_status); + else + printk(" / %s.\n", COMMON_DSC[detailed_status]); +} + +/* + * Used for error reporting/debugging purposes + */ +static void i2o_report_util_cmd(u8 cmd) +{ + switch (cmd) { + case I2O_CMD_UTIL_NOP: + printk("UTIL_NOP, "); + break; + case I2O_CMD_UTIL_ABORT: + printk("UTIL_ABORT, "); + break; + case I2O_CMD_UTIL_CLAIM: + printk("UTIL_CLAIM, "); + break; + case I2O_CMD_UTIL_RELEASE: + printk("UTIL_CLAIM_RELEASE, "); + break; + case I2O_CMD_UTIL_CONFIG_DIALOG: + printk("UTIL_CONFIG_DIALOG, "); + break; + case I2O_CMD_UTIL_DEVICE_RESERVE: + printk("UTIL_DEVICE_RESERVE, "); + break; + case I2O_CMD_UTIL_DEVICE_RELEASE: + printk("UTIL_DEVICE_RELEASE, "); + break; + case I2O_CMD_UTIL_EVT_ACK: + printk("UTIL_EVENT_ACKNOWLEDGE, "); + break; + case I2O_CMD_UTIL_EVT_REGISTER: + printk("UTIL_EVENT_REGISTER, "); + break; + case I2O_CMD_UTIL_LOCK: + printk("UTIL_LOCK, "); + break; + case I2O_CMD_UTIL_LOCK_RELEASE: + printk("UTIL_LOCK_RELEASE, "); + break; + case I2O_CMD_UTIL_PARAMS_GET: + printk("UTIL_PARAMS_GET, "); + break; + case I2O_CMD_UTIL_PARAMS_SET: + printk("UTIL_PARAMS_SET, "); + break; + case I2O_CMD_UTIL_REPLY_FAULT_NOTIFY: + printk("UTIL_REPLY_FAULT_NOTIFY, "); + break; + default: + printk("Cmd = %0#2x, ", cmd); + } +} + +/* + * Used for error reporting/debugging purposes + */ +static void i2o_report_exec_cmd(u8 cmd) +{ + switch (cmd) { + case I2O_CMD_ADAPTER_ASSIGN: + printk("EXEC_ADAPTER_ASSIGN, "); + break; + case I2O_CMD_ADAPTER_READ: + printk("EXEC_ADAPTER_READ, "); + break; + case I2O_CMD_ADAPTER_RELEASE: + printk("EXEC_ADAPTER_RELEASE, "); + break; + case I2O_CMD_BIOS_INFO_SET: + printk("EXEC_BIOS_INFO_SET, "); + break; + case I2O_CMD_BOOT_DEVICE_SET: + printk("EXEC_BOOT_DEVICE_SET, "); + break; + case I2O_CMD_CONFIG_VALIDATE: + printk("EXEC_CONFIG_VALIDATE, "); + break; + case I2O_CMD_CONN_SETUP: + printk("EXEC_CONN_SETUP, "); + break; + case I2O_CMD_DDM_DESTROY: + printk("EXEC_DDM_DESTROY, "); + break; + case I2O_CMD_DDM_ENABLE: + printk("EXEC_DDM_ENABLE, "); + break; + case I2O_CMD_DDM_QUIESCE: + printk("EXEC_DDM_QUIESCE, "); + break; + case I2O_CMD_DDM_RESET: + printk("EXEC_DDM_RESET, "); + break; + case I2O_CMD_DDM_SUSPEND: + printk("EXEC_DDM_SUSPEND, "); + break; + case I2O_CMD_DEVICE_ASSIGN: + printk("EXEC_DEVICE_ASSIGN, "); + break; + case I2O_CMD_DEVICE_RELEASE: + printk("EXEC_DEVICE_RELEASE, "); + break; + case I2O_CMD_HRT_GET: + printk("EXEC_HRT_GET, "); + break; + case I2O_CMD_ADAPTER_CLEAR: + printk("EXEC_IOP_CLEAR, "); + break; + case I2O_CMD_ADAPTER_CONNECT: + printk("EXEC_IOP_CONNECT, "); + break; + case I2O_CMD_ADAPTER_RESET: + printk("EXEC_IOP_RESET, "); + break; + case I2O_CMD_LCT_NOTIFY: + printk("EXEC_LCT_NOTIFY, "); + break; + case I2O_CMD_OUTBOUND_INIT: + printk("EXEC_OUTBOUND_INIT, "); + break; + case I2O_CMD_PATH_ENABLE: + printk("EXEC_PATH_ENABLE, "); + break; + case I2O_CMD_PATH_QUIESCE: + printk("EXEC_PATH_QUIESCE, "); + break; + case I2O_CMD_PATH_RESET: + printk("EXEC_PATH_RESET, "); + break; + case I2O_CMD_STATIC_MF_CREATE: + printk("EXEC_STATIC_MF_CREATE, "); + break; + case I2O_CMD_STATIC_MF_RELEASE: + printk("EXEC_STATIC_MF_RELEASE, "); + break; + case I2O_CMD_STATUS_GET: + printk("EXEC_STATUS_GET, "); + break; + case I2O_CMD_SW_DOWNLOAD: + printk("EXEC_SW_DOWNLOAD, "); + break; + case I2O_CMD_SW_UPLOAD: + printk("EXEC_SW_UPLOAD, "); + break; + case I2O_CMD_SW_REMOVE: + printk("EXEC_SW_REMOVE, "); + break; + case I2O_CMD_SYS_ENABLE: + printk("EXEC_SYS_ENABLE, "); + break; + case I2O_CMD_SYS_MODIFY: + printk("EXEC_SYS_MODIFY, "); + break; + case I2O_CMD_SYS_QUIESCE: + printk("EXEC_SYS_QUIESCE, "); + break; + case I2O_CMD_SYS_TAB_SET: + printk("EXEC_SYS_TAB_SET, "); + break; + default: + printk("Cmd = %#02x, ", cmd); + } +} + +void i2o_debug_state(struct i2o_controller *c) +{ + printk(KERN_INFO "%s: State = ", c->name); + switch (((i2o_status_block *) c->status_block.virt)->iop_state) { + case 0x01: + printk("INIT\n"); + break; + case 0x02: + printk("RESET\n"); + break; + case 0x04: + printk("HOLD\n"); + break; + case 0x05: + printk("READY\n"); + break; + case 0x08: + printk("OPERATIONAL\n"); + break; + case 0x10: + printk("FAILED\n"); + break; + case 0x11: + printk("FAULTED\n"); + break; + default: + printk("%x (unknown !!)\n", + ((i2o_status_block *) c->status_block.virt)->iop_state); + } +}; + +void i2o_dump_hrt(struct i2o_controller *c) +{ + u32 *rows = (u32 *) c->hrt.virt; + u8 *p = (u8 *) c->hrt.virt; + u8 *d; + int count; + int length; + int i; + int state; + + if (p[3] != 0) { + printk(KERN_ERR + "%s: HRT table for controller is too new a version.\n", + c->name); + return; + } + + count = p[0] | (p[1] << 8); + length = p[2]; + + printk(KERN_INFO "%s: HRT has %d entries of %d bytes each.\n", + c->name, count, length << 2); + + rows += 2; + + for (i = 0; i < count; i++) { + printk(KERN_INFO "Adapter %08X: ", rows[0]); + p = (u8 *) (rows + 1); + d = (u8 *) (rows + 2); + state = p[1] << 8 | p[0]; + + printk("TID %04X:[", state & 0xFFF); + state >>= 12; + if (state & (1 << 0)) + printk("H"); /* Hidden */ + if (state & (1 << 2)) { + printk("P"); /* Present */ + if (state & (1 << 1)) + printk("C"); /* Controlled */ + } + if (state > 9) + printk("*"); /* Hard */ + + printk("]:"); + + switch (p[3] & 0xFFFF) { + case 0: + /* Adapter private bus - easy */ + printk("Local bus %d: I/O at 0x%04X Mem 0x%08X", p[2], + d[1] << 8 | d[0], *(u32 *) (d + 4)); + break; + case 1: + /* ISA bus */ + printk("ISA %d: CSN %d I/O at 0x%04X Mem 0x%08X", p[2], + d[2], d[1] << 8 | d[0], *(u32 *) (d + 4)); + break; + + case 2: /* EISA bus */ + printk("EISA %d: Slot %d I/O at 0x%04X Mem 0x%08X", + p[2], d[3], d[1] << 8 | d[0], *(u32 *) (d + 4)); + break; + + case 3: /* MCA bus */ + printk("MCA %d: Slot %d I/O at 0x%04X Mem 0x%08X", p[2], + d[3], d[1] << 8 | d[0], *(u32 *) (d + 4)); + break; + + case 4: /* PCI bus */ + printk("PCI %d: Bus %d Device %d Function %d", p[2], + d[2], d[1], d[0]); + break; + + case 0x80: /* Other */ + default: + printk("Unsupported bus type."); + break; + } + printk("\n"); + rows += length; + } +} + +EXPORT_SYMBOL(i2o_dump_message); |