diff options
Diffstat (limited to 'drivers/staging/iio/Documentation/dac/max517')
| -rw-r--r-- | drivers/staging/iio/Documentation/dac/max517 | 41 |
1 files changed, 0 insertions, 41 deletions
diff --git a/drivers/staging/iio/Documentation/dac/max517 b/drivers/staging/iio/Documentation/dac/max517 deleted file mode 100644 index e60ec2f91a7a..000000000000 --- a/drivers/staging/iio/Documentation/dac/max517 +++ /dev/null @@ -1,41 +0,0 @@ -Kernel driver max517 -==================== - -Supported chips: - * Maxim MAX517, MAX518, MAX519 - Prefix: 'max517' - Datasheet: Publicly available at the Maxim website - http://www.maxim-ic.com/ - -Author: - Roland Stigge <stigge@antcom.de> - -Description ------------ - -The Maxim MAX517/518/519 is an 8-bit DAC on the I2C bus. The following table -shows the different feature sets of the variants MAX517, MAX518 and MAX519: - -Feature MAX517 MAX518 MAX519 --------------------------------------------------------------------------- -One output channel X -Two output channels X X -Simultaneous output updates X X -Supply voltage as reference X -Separate reference input X -Reference input for each DAC X - -Via the iio sysfs interface, there are three attributes available: out1_raw, -out2_raw and out12_raw. With out1_raw and out2_raw, the current output values -(0..255) of the DACs can be written to the device. out12_raw can be used to set -both output channel values simultaneously. - -With MAX517, only out1_raw is available. - -Via out1_scale (and where appropriate, out2_scale), the current scaling factor -in mV can be read. - -When the operating system goes to a power down state, the Power Down function -of the chip is activated, reducing the supply current to 4uA. - -On power-up, the device is in 0V-output state. |