diff options
Diffstat (limited to 'drivers/staging/iio/accel/adis16204.h')
| -rw-r--r-- | drivers/staging/iio/accel/adis16204.h | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/drivers/staging/iio/accel/adis16204.h b/drivers/staging/iio/accel/adis16204.h index 9ff950c1e8db..0b23f0b5c52f 100644 --- a/drivers/staging/iio/accel/adis16204.h +++ b/drivers/staging/iio/accel/adis16204.h @@ -33,15 +33,15 @@ #define ADIS16204_GLOB_CMD 0x3E /* Operation, system command register */ /* MSC_CTRL */ -#define ADIS16204_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) /* Self-test at power-on: 1 = disabled, 0 = enabled */ -#define ADIS16204_MSC_CTRL_SELF_TEST_EN (1 << 8) /* Self-test enable */ -#define ADIS16204_MSC_CTRL_DATA_RDY_EN (1 << 2) /* Data-ready enable: 1 = enabled, 0 = disabled */ -#define ADIS16204_MSC_CTRL_ACTIVE_HIGH (1 << 1) /* Data-ready polarity: 1 = active high, 0 = active low */ -#define ADIS16204_MSC_CTRL_DATA_RDY_DIO2 (1 << 0) /* Data-ready line selection: 1 = DIO2, 0 = DIO1 */ +#define ADIS16204_MSC_CTRL_PWRUP_SELF_TEST BIT(10) /* Self-test at power-on: 1 = disabled, 0 = enabled */ +#define ADIS16204_MSC_CTRL_SELF_TEST_EN BIT(8) /* Self-test enable */ +#define ADIS16204_MSC_CTRL_DATA_RDY_EN BIT(2) /* Data-ready enable: 1 = enabled, 0 = disabled */ +#define ADIS16204_MSC_CTRL_ACTIVE_HIGH BIT(1) /* Data-ready polarity: 1 = active high, 0 = active low */ +#define ADIS16204_MSC_CTRL_DATA_RDY_DIO2 BIT(0) /* Data-ready line selection: 1 = DIO2, 0 = DIO1 */ /* DIAG_STAT */ -#define ADIS16204_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16204_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ +#define ADIS16204_DIAG_STAT_ALARM2 BIT(9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ +#define ADIS16204_DIAG_STAT_ALARM1 BIT(8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ #define ADIS16204_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag: 1 = error condition, 0 = normal operation */ #define ADIS16204_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications failure */ @@ -50,11 +50,11 @@ #define ADIS16204_DIAG_STAT_POWER_LOW_BIT 0 /* Power supply below 2.975 V */ /* GLOB_CMD */ -#define ADIS16204_GLOB_CMD_SW_RESET (1<<7) -#define ADIS16204_GLOB_CMD_CLEAR_STAT (1<<4) -#define ADIS16204_GLOB_CMD_FACTORY_CAL (1<<1) +#define ADIS16204_GLOB_CMD_SW_RESET BIT(7) +#define ADIS16204_GLOB_CMD_CLEAR_STAT BIT(4) +#define ADIS16204_GLOB_CMD_FACTORY_CAL BIT(1) -#define ADIS16204_ERROR_ACTIVE (1<<14) +#define ADIS16204_ERROR_ACTIVE BIT(14) enum adis16204_scan { ADIS16204_SCAN_ACC_X, |