1 files changed, 448 insertions, 0 deletions
diff --git a/drivers/staging/iio/adc/spear_adc.c b/drivers/staging/iio/adc/spear_adc.c
new file mode 100644
index 000000000000..64d630e6fe29
--- /dev/null
+++ b/drivers/staging/iio/adc/spear_adc.c
@@ -0,0 +1,448 @@
+/*
+ * ST SPEAr ADC driver
+ *
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/*
+ * SPEAR registers definitions
+ */
+
+#define SCAN_RATE_LO(x)		((x) & 0xFFFF)
+#define SCAN_RATE_HI(x)		(((x) >> 0x10) & 0xFFFF)
+#define CLK_LOW(x)		(((x) & 0xf) << 0)
+#define CLK_HIGH(x)		(((x) & 0xf) << 4)
+
+/* Bit definitions for SPEAR_ADC_STATUS */
+#define START_CONVERSION	(1 << 0)
+#define CHANNEL_NUM(x)		((x) << 1)
+#define ADC_ENABLE		(1 << 4)
+#define AVG_SAMPLE(x)		((x) << 5)
+#define VREF_INTERNAL		(1 << 9)
+
+#define DATA_MASK		0x03ff
+#define DATA_BITS		10
+
+#define MOD_NAME "spear-adc"
+
+#define ADC_CHANNEL_NUM		8
+
+#define CLK_MIN			2500000
+#define CLK_MAX			20000000
+
+struct adc_regs_spear3xx {
+	u32 status;
+	u32 average;
+	u32 scan_rate;
+	u32 clk;	/* Not avail for 1340 & 1310 */
+	u32 ch_ctrl[ADC_CHANNEL_NUM];
+	u32 ch_data[ADC_CHANNEL_NUM];
+};
+
+struct chan_data {
+	u32 lsb;
+	u32 msb;
+};
+
+struct adc_regs_spear6xx {
+	u32 status;
+	u32 pad[2];
+	u32 clk;
+	u32 ch_ctrl[ADC_CHANNEL_NUM];
+	struct chan_data ch_data[ADC_CHANNEL_NUM];
+	u32 scan_rate_lo;
+	u32 scan_rate_hi;
+	struct chan_data average;
+};
+
+struct spear_adc_info {
+	struct device_node *np;
+	struct adc_regs_spear3xx __iomem *adc_base_spear3xx;
+	struct adc_regs_spear6xx __iomem *adc_base_spear6xx;
+	struct clk *clk;
+	struct completion completion;
+	u32 current_clk;
+	u32 sampling_freq;
+	u32 avg_samples;
+	u32 vref_external;
+	u32 value;
+};
+
+/*
+ * Functions to access some SPEAr ADC register. Abstracted into
+ * static inline functions, because of different register offsets
+ * on different SoC variants (SPEAr300 vs SPEAr600 etc).
+ */
+static void spear_adc_set_status(struct spear_adc_info *info, u32 val)
+{
+	__raw_writel(val, &info->adc_base_spear6xx->status);
+}
+
+static void spear_adc_set_clk(struct spear_adc_info *info, u32 val)
+{
+	u32 clk_high, clk_low, count;
+	u32 apb_clk = clk_get_rate(info->clk);
+
+	count = (apb_clk + val - 1) / val;
+	clk_low = count / 2;
+	clk_high = count - clk_low;
+	info->current_clk = apb_clk / count;
+
+	__raw_writel(CLK_LOW(clk_low) | CLK_HIGH(clk_high),
+		     &info->adc_base_spear6xx->clk);
+}
+
+static void spear_adc_set_ctrl(struct spear_adc_info *info, int n,
+			       u32 val)
+{
+	__raw_writel(val, &info->adc_base_spear6xx->ch_ctrl[n]);
+}
+
+static u32 spear_adc_get_average(struct spear_adc_info *info)
+{
+	if (of_device_is_compatible(info->np, "st,spear600-adc")) {
+		return __raw_readl(&info->adc_base_spear6xx->average.msb) &
+			DATA_MASK;
+	} else {
+		return __raw_readl(&info->adc_base_spear3xx->average) &
+			DATA_MASK;
+	}
+}
+
+static void spear_adc_set_scanrate(struct spear_adc_info *info, u32 rate)
+{
+	if (of_device_is_compatible(info->np, "st,spear600-adc")) {
+		__raw_writel(SCAN_RATE_LO(rate),
+			     &info->adc_base_spear6xx->scan_rate_lo);
+		__raw_writel(SCAN_RATE_HI(rate),
+			     &info->adc_base_spear6xx->scan_rate_hi);
+	} else {
+		__raw_writel(rate, &info->adc_base_spear3xx->scan_rate);
+	}
+}
+
+static int spear_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val,
+			  int *val2,
+			  long mask)
+{
+	struct spear_adc_info *info = iio_priv(indio_dev);
+	u32 scale_mv;
+	u32 status;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&indio_dev->mlock);
+
+		status = CHANNEL_NUM(chan->channel) |
+			AVG_SAMPLE(info->avg_samples) |
+			START_CONVERSION | ADC_ENABLE;
+		if (info->vref_external == 0)
+			status |= VREF_INTERNAL;
+
+		spear_adc_set_status(info, status);
+		wait_for_completion(&info->completion); /* set by ISR */
+		*val = info->value;
+
+		mutex_unlock(&indio_dev->mlock);
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		scale_mv = (info->vref_external * 1000) >> DATA_BITS;
+		*val =  scale_mv / 1000;
+		*val2 = (scale_mv % 1000) * 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+
+	return -EINVAL;
+}
+
+#define SPEAR_ADC_CHAN(idx) {				\
+	.type = IIO_VOLTAGE,				\
+	.indexed = 1,					\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+	IIO_CHAN_INFO_SCALE_SHARED_BIT,			\
+	.channel = idx,					\
+	.scan_type = {					\
+		.sign = 'u',				\
+		.storagebits = 16,			\
+	},						\
+}
+
+static struct iio_chan_spec spear_adc_iio_channels[] = {
+	SPEAR_ADC_CHAN(0),
+	SPEAR_ADC_CHAN(1),
+	SPEAR_ADC_CHAN(2),
+	SPEAR_ADC_CHAN(3),
+	SPEAR_ADC_CHAN(4),
+	SPEAR_ADC_CHAN(5),
+	SPEAR_ADC_CHAN(6),
+	SPEAR_ADC_CHAN(7),
+};
+
+static irqreturn_t spear_adc_isr(int irq, void *dev_id)
+{
+	struct spear_adc_info *info = (struct spear_adc_info *)dev_id;
+
+	/* Read value to clear IRQ */
+	info->value = spear_adc_get_average(info);
+	complete(&info->completion);
+
+	return IRQ_HANDLED;
+}
+
+static int spear_adc_configure(struct spear_adc_info *info)
+{
+	int i;
+
+	/* Reset ADC core */
+	spear_adc_set_status(info, 0);
+	__raw_writel(0, &info->adc_base_spear6xx->clk);
+	for (i = 0; i < 8; i++)
+		spear_adc_set_ctrl(info, i, 0);
+	spear_adc_set_scanrate(info, 0);
+
+	spear_adc_set_clk(info, info->sampling_freq);
+
+	return 0;
+}
+
+static ssize_t spear_adc_read_frequency(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct spear_adc_info *info = iio_priv(indio_dev);
+
+	return sprintf(buf, "%d\n", info->current_clk);
+}
+
+static ssize_t spear_adc_write_frequency(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf,
+					 size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct spear_adc_info *info = iio_priv(indio_dev);
+	u32 clk_high, clk_low, count;
+	u32 apb_clk = clk_get_rate(info->clk);
+	unsigned long lval;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &lval);
+	if (ret)
+		return ret;
+
+	mutex_lock(&indio_dev->mlock);
+
+	if ((lval < CLK_MIN) || (lval > CLK_MAX)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	count = (apb_clk + lval - 1) / lval;
+	clk_low = count / 2;
+	clk_high = count - clk_low;
+	info->current_clk = apb_clk / count;
+	spear_adc_set_clk(info, lval);
+
+out:
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret ? ret : len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+			      spear_adc_read_frequency,
+			      spear_adc_write_frequency);
+
+static struct attribute *spear_attributes[] = {
+	&iio_dev_attr_sampling_frequency.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group spear_attribute_group = {
+	.attrs = spear_attributes,
+};
+
+static const struct iio_info spear_adc_iio_info = {
+	.read_raw = &spear_read_raw,
+	.attrs = &spear_attribute_group,
+	.driver_module = THIS_MODULE,
+};
+
+static int __devinit spear_adc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct spear_adc_info *info;
+	struct iio_dev *iodev = NULL;
+	int ret = -ENODEV;
+	int irq;
+
+	iodev = iio_device_alloc(sizeof(struct spear_adc_info));
+	if (!iodev) {
+		dev_err(dev, "failed allocating iio device\n");
+		ret = -ENOMEM;
+		goto errout1;
+	}
+
+	info = iio_priv(iodev);
+	info->np = np;
+
+	/*
+	 * SPEAr600 has a different register layout than other SPEAr SoC's
+	 * (e.g. SPEAr3xx). Let's provide two register base addresses
+	 * to support multi-arch kernels.
+	 */
+	info->adc_base_spear6xx = of_iomap(np, 0);
+	if (!info->adc_base_spear6xx) {
+		dev_err(dev, "failed mapping memory\n");
+		ret = -ENOMEM;
+		goto errout2;
+	}
+	info->adc_base_spear3xx =
+		(struct adc_regs_spear3xx *)info->adc_base_spear6xx;
+
+	info->clk = clk_get(dev, NULL);
+	if (IS_ERR(info->clk)) {
+		dev_err(dev, "failed getting clock\n");
+		goto errout3;
+	}
+
+	ret = clk_prepare(info->clk);
+	if (ret) {
+		dev_err(dev, "failed preparing clock\n");
+		goto errout4;
+	}
+
+	ret = clk_enable(info->clk);
+	if (ret) {
+		dev_err(dev, "failed enabling clock\n");
+		goto errout5;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if ((irq < 0) || (irq >= NR_IRQS)) {
+		dev_err(dev, "failed getting interrupt resource\n");
+		ret = -EINVAL;
+		goto errout6;
+	}
+
+	ret = devm_request_irq(dev, irq, spear_adc_isr, 0, MOD_NAME, info);
+	if (ret < 0) {
+		dev_err(dev, "failed requesting interrupt\n");
+		goto errout6;
+	}
+
+	if (of_property_read_u32(np, "sampling-frequency",
+				 &info->sampling_freq)) {
+		dev_err(dev, "sampling-frequency missing in DT\n");
+		ret = -EINVAL;
+		goto errout6;
+	}
+
+	/*
+	 * Optional avg_samples defaults to 0, resulting in single data
+	 * conversion
+	 */
+	of_property_read_u32(np, "average-samples", &info->avg_samples);
+
+	/*
+	 * Optional vref_external defaults to 0, resulting in internal vref
+	 * selection
+	 */
+	of_property_read_u32(np, "vref-external", &info->vref_external);
+
+	spear_adc_configure(info);
+
+	platform_set_drvdata(pdev, iodev);
+
+	init_completion(&info->completion);
+
+	iodev->name = MOD_NAME;
+	iodev->dev.parent = dev;
+	iodev->info = &spear_adc_iio_info;
+	iodev->modes = INDIO_DIRECT_MODE;
+	iodev->channels = spear_adc_iio_channels;
+	iodev->num_channels = ARRAY_SIZE(spear_adc_iio_channels);
+
+	ret = iio_device_register(iodev);
+	if (ret)
+		goto errout6;
+
+	dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq);
+
+	return 0;
+
+errout6:
+	clk_disable(info->clk);
+errout5:
+	clk_unprepare(info->clk);
+errout4:
+	clk_put(info->clk);
+errout3:
+	iounmap(info->adc_base_spear6xx);
+errout2:
+	iio_device_free(iodev);
+errout1:
+	return ret;
+}
+
+static int __devexit spear_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *iodev = platform_get_drvdata(pdev);
+	struct spear_adc_info *info = iio_priv(iodev);
+
+	iio_device_unregister(iodev);
+	platform_set_drvdata(pdev, NULL);
+	clk_disable(info->clk);
+	clk_unprepare(info->clk);
+	clk_put(info->clk);
+	iounmap(info->adc_base_spear6xx);
+	iio_device_free(iodev);
+
+	return 0;
+}
+
+static const struct of_device_id spear_adc_dt_ids[] = {
+	{ .compatible = "st,spear600-adc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, spear_adc_dt_ids);
+
+static struct platform_driver spear_adc_driver = {
+	.probe		= spear_adc_probe,
+	.remove		= __devexit_p(spear_adc_remove),
+	.driver		= {
+		.name	= MOD_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(spear_adc_dt_ids),
+	},
+};
+
+module_platform_driver(spear_adc_driver);
+
+MODULE_AUTHOR("Stefan Roese <sr@denx.de>");
+MODULE_DESCRIPTION("SPEAr ADC driver");
+MODULE_LICENSE("GPL");