diff options
Diffstat (limited to 'drivers/staging/iio/light/tsl2583.c')
| -rw-r--r-- | drivers/staging/iio/light/tsl2583.c | 963 |
1 files changed, 0 insertions, 963 deletions
diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c deleted file mode 100644 index 08f1583ee34e..000000000000 --- a/drivers/staging/iio/light/tsl2583.c +++ /dev/null @@ -1,963 +0,0 @@ -/* - * Device driver for monitoring ambient light intensity (lux) - * within the TAOS tsl258x family of devices (tsl2580, tsl2581). - * - * Copyright (c) 2011, TAOS Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/mutex.h> -#include <linux/unistd.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/iio/iio.h> - -#define TSL258X_MAX_DEVICE_REGS 32 - -/* Triton register offsets */ -#define TSL258X_REG_MAX 8 - -/* Device Registers and Masks */ -#define TSL258X_CNTRL 0x00 -#define TSL258X_ALS_TIME 0X01 -#define TSL258X_INTERRUPT 0x02 -#define TSL258X_GAIN 0x07 -#define TSL258X_REVID 0x11 -#define TSL258X_CHIPID 0x12 -#define TSL258X_ALS_CHAN0LO 0x14 -#define TSL258X_ALS_CHAN0HI 0x15 -#define TSL258X_ALS_CHAN1LO 0x16 -#define TSL258X_ALS_CHAN1HI 0x17 -#define TSL258X_TMR_LO 0x18 -#define TSL258X_TMR_HI 0x19 - -/* tsl2583 cmd reg masks */ -#define TSL258X_CMD_REG 0x80 -#define TSL258X_CMD_SPL_FN 0x60 -#define TSL258X_CMD_ALS_INT_CLR 0X01 - -/* tsl2583 cntrl reg masks */ -#define TSL258X_CNTL_ADC_ENBL 0x02 -#define TSL258X_CNTL_PWR_ON 0x01 - -/* tsl2583 status reg masks */ -#define TSL258X_STA_ADC_VALID 0x01 -#define TSL258X_STA_ADC_INTR 0x10 - -/* Lux calculation constants */ -#define TSL258X_LUX_CALC_OVER_FLOW 65535 - -enum { - TSL258X_CHIP_UNKNOWN = 0, - TSL258X_CHIP_WORKING = 1, - TSL258X_CHIP_SUSPENDED = 2 -}; - -/* Per-device data */ -struct taos_als_info { - u16 als_ch0; - u16 als_ch1; - u16 lux; -}; - -struct taos_settings { - int als_time; - int als_gain; - int als_gain_trim; - int als_cal_target; -}; - -struct tsl2583_chip { - struct mutex als_mutex; - struct i2c_client *client; - struct taos_als_info als_cur_info; - struct taos_settings taos_settings; - int als_time_scale; - int als_saturation; - int taos_chip_status; - u8 taos_config[8]; -}; - -/* - * Initial values for device - this values can/will be changed by driver. - * and applications as needed. - * These values are dynamic. - */ -static const u8 taos_config[8] = { - 0x00, 0xee, 0x00, 0x03, 0x00, 0xFF, 0xFF, 0x00 -}; /* cntrl atime intC Athl0 Athl1 Athh0 Athh1 gain */ - -struct taos_lux { - unsigned int ratio; - unsigned int ch0; - unsigned int ch1; -}; - -/* This structure is intentionally large to accommodate updates via sysfs. */ -/* Sized to 11 = max 10 segments + 1 termination segment */ -/* Assumption is one and only one type of glass used */ -static struct taos_lux taos_device_lux[11] = { - { 9830, 8520, 15729 }, - { 12452, 10807, 23344 }, - { 14746, 6383, 11705 }, - { 17695, 4063, 6554 }, -}; - -struct gainadj { - s16 ch0; - s16 ch1; -}; - -/* Index = (0 - 3) Used to validate the gain selection index */ -static const struct gainadj gainadj[] = { - { 1, 1 }, - { 8, 8 }, - { 16, 16 }, - { 107, 115 } -}; - -/* - * Provides initial operational parameter defaults. - * These defaults may be changed through the device's sysfs files. - */ -static void taos_defaults(struct tsl2583_chip *chip) -{ - /* Operational parameters */ - chip->taos_settings.als_time = 100; - /* must be a multiple of 50mS */ - chip->taos_settings.als_gain = 0; - /* this is actually an index into the gain table */ - /* assume clear glass as default */ - chip->taos_settings.als_gain_trim = 1000; - /* default gain trim to account for aperture effects */ - chip->taos_settings.als_cal_target = 130; - /* Known external ALS reading used for calibration */ -} - -/* - * Read a number of bytes starting at register (reg) location. - * Return 0, or i2c_smbus_write_byte ERROR code. - */ -static int -taos_i2c_read(struct i2c_client *client, u8 reg, u8 *val, unsigned int len) -{ - int i, ret; - - for (i = 0; i < len; i++) { - /* select register to write */ - ret = i2c_smbus_write_byte(client, (TSL258X_CMD_REG | reg)); - if (ret < 0) { - dev_err(&client->dev, - "taos_i2c_read failed to write register %x\n", - reg); - return ret; - } - /* read the data */ - *val = i2c_smbus_read_byte(client); - val++; - reg++; - } - return 0; -} - -/* - * Reads and calculates current lux value. - * The raw ch0 and ch1 values of the ambient light sensed in the last - * integration cycle are read from the device. - * Time scale factor array values are adjusted based on the integration time. - * The raw values are multiplied by a scale factor, and device gain is obtained - * using gain index. Limit checks are done next, then the ratio of a multiple - * of ch1 value, to the ch0 value, is calculated. The array taos_device_lux[] - * declared above is then scanned to find the first ratio value that is just - * above the ratio we just calculated. The ch0 and ch1 multiplier constants in - * the array are then used along with the time scale factor array values, to - * calculate the lux. - */ -static int taos_get_lux(struct iio_dev *indio_dev) -{ - u16 ch0, ch1; /* separated ch0/ch1 data from device */ - u32 lux; /* raw lux calculated from device data */ - u64 lux64; - u32 ratio; - u8 buf[5]; - struct taos_lux *p; - struct tsl2583_chip *chip = iio_priv(indio_dev); - int i, ret; - u32 ch0lux = 0; - u32 ch1lux = 0; - - if (mutex_trylock(&chip->als_mutex) == 0) { - dev_info(&chip->client->dev, "taos_get_lux device is busy\n"); - return chip->als_cur_info.lux; /* busy, so return LAST VALUE */ - } - - if (chip->taos_chip_status != TSL258X_CHIP_WORKING) { - /* device is not enabled */ - dev_err(&chip->client->dev, "taos_get_lux device is not enabled\n"); - ret = -EBUSY; - goto out_unlock; - } - - ret = taos_i2c_read(chip->client, (TSL258X_CMD_REG), &buf[0], 1); - if (ret < 0) { - dev_err(&chip->client->dev, "taos_get_lux failed to read CMD_REG\n"); - goto out_unlock; - } - /* is data new & valid */ - if (!(buf[0] & TSL258X_STA_ADC_INTR)) { - dev_err(&chip->client->dev, "taos_get_lux data not valid\n"); - ret = chip->als_cur_info.lux; /* return LAST VALUE */ - goto out_unlock; - } - - for (i = 0; i < 4; i++) { - int reg = TSL258X_CMD_REG | (TSL258X_ALS_CHAN0LO + i); - - ret = taos_i2c_read(chip->client, reg, &buf[i], 1); - if (ret < 0) { - dev_err(&chip->client->dev, - "taos_get_lux failed to read register %x\n", - reg); - goto out_unlock; - } - } - - /* - * clear status, really interrupt status (interrupts are off), but - * we use the bit anyway - don't forget 0x80 - this is a command - */ - ret = i2c_smbus_write_byte(chip->client, - (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN | - TSL258X_CMD_ALS_INT_CLR)); - - if (ret < 0) { - dev_err(&chip->client->dev, - "taos_i2c_write_command failed in taos_get_lux, err = %d\n", - ret); - goto out_unlock; /* have no data, so return failure */ - } - - /* extract ALS/lux data */ - ch0 = le16_to_cpup((const __le16 *)&buf[0]); - ch1 = le16_to_cpup((const __le16 *)&buf[2]); - - chip->als_cur_info.als_ch0 = ch0; - chip->als_cur_info.als_ch1 = ch1; - - if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation)) - goto return_max; - - if (!ch0) { - /* have no data, so return LAST VALUE */ - ret = 0; - chip->als_cur_info.lux = 0; - goto out_unlock; - } - /* calculate ratio */ - ratio = (ch1 << 15) / ch0; - /* convert to unscaled lux using the pointer to the table */ - for (p = (struct taos_lux *)taos_device_lux; - p->ratio != 0 && p->ratio < ratio; p++) - ; - - if (p->ratio == 0) { - lux = 0; - } else { - ch0lux = ((ch0 * p->ch0) + - (gainadj[chip->taos_settings.als_gain].ch0 >> 1)) - / gainadj[chip->taos_settings.als_gain].ch0; - ch1lux = ((ch1 * p->ch1) + - (gainadj[chip->taos_settings.als_gain].ch1 >> 1)) - / gainadj[chip->taos_settings.als_gain].ch1; - lux = ch0lux - ch1lux; - } - - /* note: lux is 31 bit max at this point */ - if (ch1lux > ch0lux) { - dev_dbg(&chip->client->dev, "No Data - Return last value\n"); - ret = 0; - chip->als_cur_info.lux = 0; - goto out_unlock; - } - - /* adjust for active time scale */ - if (chip->als_time_scale == 0) - lux = 0; - else - lux = (lux + (chip->als_time_scale >> 1)) / - chip->als_time_scale; - - /* Adjust for active gain scale. - * The taos_device_lux tables above have a factor of 8192 built in, - * so we need to shift right. - * User-specified gain provides a multiplier. - * Apply user-specified gain before shifting right to retain precision. - * Use 64 bits to avoid overflow on multiplication. - * Then go back to 32 bits before division to avoid using div_u64(). - */ - lux64 = lux; - lux64 = lux64 * chip->taos_settings.als_gain_trim; - lux64 >>= 13; - lux = lux64; - lux = (lux + 500) / 1000; - if (lux > TSL258X_LUX_CALC_OVER_FLOW) { /* check for overflow */ -return_max: - lux = TSL258X_LUX_CALC_OVER_FLOW; - } - - /* Update the structure with the latest VALID lux. */ - chip->als_cur_info.lux = lux; - ret = lux; - -out_unlock: - mutex_unlock(&chip->als_mutex); - return ret; -} - -/* - * Obtain single reading and calculate the als_gain_trim (later used - * to derive actual lux). - * Return updated gain_trim value. - */ -static int taos_als_calibrate(struct iio_dev *indio_dev) -{ - struct tsl2583_chip *chip = iio_priv(indio_dev); - u8 reg_val; - unsigned int gain_trim_val; - int ret; - int lux_val; - - ret = i2c_smbus_write_byte(chip->client, - (TSL258X_CMD_REG | TSL258X_CNTRL)); - if (ret < 0) { - dev_err(&chip->client->dev, - "taos_als_calibrate failed to reach the CNTRL register, ret=%d\n", - ret); - return ret; - } - - reg_val = i2c_smbus_read_byte(chip->client); - if ((reg_val & (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON)) - != (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON)) { - dev_err(&chip->client->dev, - "taos_als_calibrate failed: device not powered on with ADC enabled\n"); - return -1; - } - - ret = i2c_smbus_write_byte(chip->client, - (TSL258X_CMD_REG | TSL258X_CNTRL)); - if (ret < 0) { - dev_err(&chip->client->dev, - "taos_als_calibrate failed to reach the STATUS register, ret=%d\n", - ret); - return ret; - } - reg_val = i2c_smbus_read_byte(chip->client); - - if ((reg_val & TSL258X_STA_ADC_VALID) != TSL258X_STA_ADC_VALID) { - dev_err(&chip->client->dev, - "taos_als_calibrate failed: STATUS - ADC not valid.\n"); - return -ENODATA; - } - lux_val = taos_get_lux(indio_dev); - if (lux_val < 0) { - dev_err(&chip->client->dev, "taos_als_calibrate failed to get lux\n"); - return lux_val; - } - gain_trim_val = (unsigned int)(((chip->taos_settings.als_cal_target) - * chip->taos_settings.als_gain_trim) / lux_val); - - if ((gain_trim_val < 250) || (gain_trim_val > 4000)) { - dev_err(&chip->client->dev, - "taos_als_calibrate failed: trim_val of %d is out of range\n", - gain_trim_val); - return -ENODATA; - } - chip->taos_settings.als_gain_trim = (int)gain_trim_val; - - return (int)gain_trim_val; -} - -/* - * Turn the device on. - * Configuration must be set before calling this function. - */ -static int taos_chip_on(struct iio_dev *indio_dev) -{ - int i; - int ret; - u8 *uP; - u8 utmp; - int als_count; - int als_time; - struct tsl2583_chip *chip = iio_priv(indio_dev); - - /* and make sure we're not already on */ - if (chip->taos_chip_status == TSL258X_CHIP_WORKING) { - /* if forcing a register update - turn off, then on */ - dev_info(&chip->client->dev, "device is already enabled\n"); - return -EINVAL; - } - - /* determine als integration register */ - als_count = (chip->taos_settings.als_time * 100 + 135) / 270; - if (!als_count) - als_count = 1; /* ensure at least one cycle */ - - /* convert back to time (encompasses overrides) */ - als_time = (als_count * 27 + 5) / 10; - chip->taos_config[TSL258X_ALS_TIME] = 256 - als_count; - - /* Set the gain based on taos_settings struct */ - chip->taos_config[TSL258X_GAIN] = chip->taos_settings.als_gain; - - /* set chip struct re scaling and saturation */ - chip->als_saturation = als_count * 922; /* 90% of full scale */ - chip->als_time_scale = (als_time + 25) / 50; - - /* - * TSL258x Specific power-on / adc enable sequence - * Power on the device 1st. - */ - utmp = TSL258X_CNTL_PWR_ON; - ret = i2c_smbus_write_byte_data(chip->client, - TSL258X_CMD_REG | TSL258X_CNTRL, utmp); - if (ret < 0) { - dev_err(&chip->client->dev, "taos_chip_on failed on CNTRL reg.\n"); - return ret; - } - - /* - * Use the following shadow copy for our delay before enabling ADC. - * Write all the registers. - */ - for (i = 0, uP = chip->taos_config; i < TSL258X_REG_MAX; i++) { - ret = i2c_smbus_write_byte_data(chip->client, - TSL258X_CMD_REG + i, - *uP++); - if (ret < 0) { - dev_err(&chip->client->dev, - "taos_chip_on failed on reg %d.\n", i); - return ret; - } - } - - usleep_range(3000, 3500); - /* - * NOW enable the ADC - * initialize the desired mode of operation - */ - utmp = TSL258X_CNTL_PWR_ON | TSL258X_CNTL_ADC_ENBL; - ret = i2c_smbus_write_byte_data(chip->client, - TSL258X_CMD_REG | TSL258X_CNTRL, - utmp); - if (ret < 0) { - dev_err(&chip->client->dev, "taos_chip_on failed on 2nd CTRL reg.\n"); - return ret; - } - chip->taos_chip_status = TSL258X_CHIP_WORKING; - - return ret; -} - -static int taos_chip_off(struct iio_dev *indio_dev) -{ - struct tsl2583_chip *chip = iio_priv(indio_dev); - - /* turn device off */ - chip->taos_chip_status = TSL258X_CHIP_SUSPENDED; - return i2c_smbus_write_byte_data(chip->client, - TSL258X_CMD_REG | TSL258X_CNTRL, - 0x00); -} - -/* Sysfs Interface Functions */ - -static ssize_t taos_power_state_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", chip->taos_chip_status); -} - -static ssize_t taos_power_state_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - int value; - - if (kstrtoint(buf, 0, &value)) - return -EINVAL; - - if (!value) - taos_chip_off(indio_dev); - else - taos_chip_on(indio_dev); - - return len; -} - -static ssize_t taos_gain_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - char gain[4] = {0}; - - switch (chip->taos_settings.als_gain) { - case 0: - strcpy(gain, "001"); - break; - case 1: - strcpy(gain, "008"); - break; - case 2: - strcpy(gain, "016"); - break; - case 3: - strcpy(gain, "111"); - break; - } - - return sprintf(buf, "%s\n", gain); -} - -static ssize_t taos_gain_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int value; - - if (kstrtoint(buf, 0, &value)) - return -EINVAL; - - switch (value) { - case 1: - chip->taos_settings.als_gain = 0; - break; - case 8: - chip->taos_settings.als_gain = 1; - break; - case 16: - chip->taos_settings.als_gain = 2; - break; - case 111: - chip->taos_settings.als_gain = 3; - break; - default: - dev_err(dev, "Invalid Gain Index (must be 1,8,16,111)\n"); - return -1; - } - - return len; -} - -static ssize_t taos_gain_available_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sprintf(buf, "%s\n", "1 8 16 111"); -} - -static ssize_t taos_als_time_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", chip->taos_settings.als_time); -} - -static ssize_t taos_als_time_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int value; - - if (kstrtoint(buf, 0, &value)) - return -EINVAL; - - if ((value < 50) || (value > 650)) - return -EINVAL; - - if (value % 50) - return -EINVAL; - - chip->taos_settings.als_time = value; - - return len; -} - -static ssize_t taos_als_time_available_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sprintf(buf, "%s\n", - "50 100 150 200 250 300 350 400 450 500 550 600 650"); -} - -static ssize_t taos_als_trim_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", chip->taos_settings.als_gain_trim); -} - -static ssize_t taos_als_trim_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int value; - - if (kstrtoint(buf, 0, &value)) - return -EINVAL; - - if (value) - chip->taos_settings.als_gain_trim = value; - - return len; -} - -static ssize_t taos_als_cal_target_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", chip->taos_settings.als_cal_target); -} - -static ssize_t taos_als_cal_target_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int value; - - if (kstrtoint(buf, 0, &value)) - return -EINVAL; - - if (value) - chip->taos_settings.als_cal_target = value; - - return len; -} - -static ssize_t taos_lux_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - int ret; - - ret = taos_get_lux(dev_to_iio_dev(dev)); - if (ret < 0) - return ret; - - return sprintf(buf, "%d\n", ret); -} - -static ssize_t taos_do_calibrate(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - int value; - - if (kstrtoint(buf, 0, &value)) - return -EINVAL; - - if (value == 1) - taos_als_calibrate(indio_dev); - - return len; -} - -static ssize_t taos_luxtable_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - int i; - int offset = 0; - - for (i = 0; i < ARRAY_SIZE(taos_device_lux); i++) { - offset += sprintf(buf + offset, "%u,%u,%u,", - taos_device_lux[i].ratio, - taos_device_lux[i].ch0, - taos_device_lux[i].ch1); - if (taos_device_lux[i].ratio == 0) { - /* - * We just printed the first "0" entry. - * Now get rid of the extra "," and break. - */ - offset--; - break; - } - } - - offset += sprintf(buf + offset, "\n"); - return offset; -} - -static ssize_t taos_luxtable_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int value[ARRAY_SIZE(taos_device_lux) * 3 + 1]; - int n; - - get_options(buf, ARRAY_SIZE(value), value); - - /* We now have an array of ints starting at value[1], and - * enumerated by value[0]. - * We expect each group of three ints is one table entry, - * and the last table entry is all 0. - */ - n = value[0]; - if ((n % 3) || n < 6 || n > ((ARRAY_SIZE(taos_device_lux) - 1) * 3)) { - dev_info(dev, "LUX TABLE INPUT ERROR 1 Value[0]=%d\n", n); - return -EINVAL; - } - if ((value[(n - 2)] | value[(n - 1)] | value[n]) != 0) { - dev_info(dev, "LUX TABLE INPUT ERROR 2 Value[0]=%d\n", n); - return -EINVAL; - } - - if (chip->taos_chip_status == TSL258X_CHIP_WORKING) - taos_chip_off(indio_dev); - - /* Zero out the table */ - memset(taos_device_lux, 0, sizeof(taos_device_lux)); - memcpy(taos_device_lux, &value[1], (value[0] * 4)); - - taos_chip_on(indio_dev); - - return len; -} - -static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR, - taos_power_state_show, taos_power_state_store); - -static DEVICE_ATTR(illuminance0_calibscale, S_IRUGO | S_IWUSR, - taos_gain_show, taos_gain_store); -static DEVICE_ATTR(illuminance0_calibscale_available, S_IRUGO, - taos_gain_available_show, NULL); - -static DEVICE_ATTR(illuminance0_integration_time, S_IRUGO | S_IWUSR, - taos_als_time_show, taos_als_time_store); -static DEVICE_ATTR(illuminance0_integration_time_available, S_IRUGO, - taos_als_time_available_show, NULL); - -static DEVICE_ATTR(illuminance0_calibbias, S_IRUGO | S_IWUSR, - taos_als_trim_show, taos_als_trim_store); - -static DEVICE_ATTR(illuminance0_input_target, S_IRUGO | S_IWUSR, - taos_als_cal_target_show, taos_als_cal_target_store); - -static DEVICE_ATTR(illuminance0_input, S_IRUGO, taos_lux_show, NULL); -static DEVICE_ATTR(illuminance0_calibrate, S_IWUSR, NULL, taos_do_calibrate); -static DEVICE_ATTR(illuminance0_lux_table, S_IRUGO | S_IWUSR, - taos_luxtable_show, taos_luxtable_store); - -static struct attribute *sysfs_attrs_ctrl[] = { - &dev_attr_power_state.attr, - &dev_attr_illuminance0_calibscale.attr, /* Gain */ - &dev_attr_illuminance0_calibscale_available.attr, - &dev_attr_illuminance0_integration_time.attr, /* I time*/ - &dev_attr_illuminance0_integration_time_available.attr, - &dev_attr_illuminance0_calibbias.attr, /* trim */ - &dev_attr_illuminance0_input_target.attr, - &dev_attr_illuminance0_input.attr, - &dev_attr_illuminance0_calibrate.attr, - &dev_attr_illuminance0_lux_table.attr, - NULL -}; - -static const struct attribute_group tsl2583_attribute_group = { - .attrs = sysfs_attrs_ctrl, -}; - -/* Use the default register values to identify the Taos device */ -static int taos_tsl258x_device(unsigned char *bufp) -{ - return ((bufp[TSL258X_CHIPID] & 0xf0) == 0x90); -} - -static const struct iio_info tsl2583_info = { - .attrs = &tsl2583_attribute_group, - .driver_module = THIS_MODULE, -}; - -/* - * Client probe function - When a valid device is found, the driver's device - * data structure is updated, and initialization completes successfully. - */ -static int taos_probe(struct i2c_client *clientp, - const struct i2c_device_id *idp) -{ - int i, ret; - unsigned char buf[TSL258X_MAX_DEVICE_REGS]; - struct tsl2583_chip *chip; - struct iio_dev *indio_dev; - - if (!i2c_check_functionality(clientp->adapter, - I2C_FUNC_SMBUS_BYTE_DATA)) { - dev_err(&clientp->dev, "taos_probe() - i2c smbus byte data func unsupported\n"); - return -EOPNOTSUPP; - } - - indio_dev = devm_iio_device_alloc(&clientp->dev, sizeof(*chip)); - if (!indio_dev) - return -ENOMEM; - chip = iio_priv(indio_dev); - chip->client = clientp; - i2c_set_clientdata(clientp, indio_dev); - - mutex_init(&chip->als_mutex); - chip->taos_chip_status = TSL258X_CHIP_UNKNOWN; - memcpy(chip->taos_config, taos_config, sizeof(chip->taos_config)); - - for (i = 0; i < TSL258X_MAX_DEVICE_REGS; i++) { - ret = i2c_smbus_write_byte(clientp, - (TSL258X_CMD_REG | (TSL258X_CNTRL + i))); - if (ret < 0) { - dev_err(&clientp->dev, - "i2c_smbus_write_byte to cmd reg failed in taos_probe(), err = %d\n", - ret); - return ret; - } - ret = i2c_smbus_read_byte(clientp); - if (ret < 0) { - dev_err(&clientp->dev, - "i2c_smbus_read_byte from reg failed in taos_probe(), err = %d\n", - ret); - return ret; - } - buf[i] = ret; - } - - if (!taos_tsl258x_device(buf)) { - dev_info(&clientp->dev, - "i2c device found but does not match expected id in taos_probe()\n"); - return -EINVAL; - } - - ret = i2c_smbus_write_byte(clientp, (TSL258X_CMD_REG | TSL258X_CNTRL)); - if (ret < 0) { - dev_err(&clientp->dev, - "i2c_smbus_write_byte() to cmd reg failed in taos_probe(), err = %d\n", - ret); - return ret; - } - - indio_dev->info = &tsl2583_info; - indio_dev->dev.parent = &clientp->dev; - indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->name = chip->client->name; - ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev); - if (ret) { - dev_err(&clientp->dev, "iio registration failed\n"); - return ret; - } - - /* Load up the V2 defaults (these are hard coded defaults for now) */ - taos_defaults(chip); - - /* Make sure the chip is on */ - taos_chip_on(indio_dev); - - dev_info(&clientp->dev, "Light sensor found.\n"); - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int taos_suspend(struct device *dev) -{ - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int ret = 0; - - mutex_lock(&chip->als_mutex); - - if (chip->taos_chip_status == TSL258X_CHIP_WORKING) { - ret = taos_chip_off(indio_dev); - chip->taos_chip_status = TSL258X_CHIP_SUSPENDED; - } - - mutex_unlock(&chip->als_mutex); - return ret; -} - -static int taos_resume(struct device *dev) -{ - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); - struct tsl2583_chip *chip = iio_priv(indio_dev); - int ret = 0; - - mutex_lock(&chip->als_mutex); - - if (chip->taos_chip_status == TSL258X_CHIP_SUSPENDED) - ret = taos_chip_on(indio_dev); - - mutex_unlock(&chip->als_mutex); - return ret; -} - -static SIMPLE_DEV_PM_OPS(taos_pm_ops, taos_suspend, taos_resume); -#define TAOS_PM_OPS (&taos_pm_ops) -#else -#define TAOS_PM_OPS NULL -#endif - -static struct i2c_device_id taos_idtable[] = { - { "tsl2580", 0 }, - { "tsl2581", 1 }, - { "tsl2583", 2 }, - {} -}; -MODULE_DEVICE_TABLE(i2c, taos_idtable); - -/* Driver definition */ -static struct i2c_driver taos_driver = { - .driver = { - .name = "tsl2583", - .pm = TAOS_PM_OPS, - }, - .id_table = taos_idtable, - .probe = taos_probe, -}; -module_i2c_driver(taos_driver); - -MODULE_AUTHOR("J. August Brenner<jbrenner@taosinc.com>"); -MODULE_DESCRIPTION("TAOS tsl2583 ambient light sensor driver"); -MODULE_LICENSE("GPL"); |