diff options
Diffstat (limited to 'drivers/staging/isdn/hysdn')
| -rw-r--r-- | drivers/staging/isdn/hysdn/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/staging/isdn/hysdn/Makefile | 12 | ||||
| -rw-r--r-- | drivers/staging/isdn/hysdn/boardergo.c | 445 | ||||
| -rw-r--r-- | drivers/staging/isdn/hysdn/boardergo.h | 100 | ||||
| -rw-r--r-- | drivers/staging/isdn/hysdn/hycapi.c | 785 | ||||
| -rw-r--r-- | drivers/staging/isdn/hysdn/hysdn_boot.c | 400 | ||||
| -rw-r--r-- | drivers/staging/isdn/hysdn/hysdn_defs.h | 282 | ||||
| -rw-r--r-- | drivers/staging/isdn/hysdn/hysdn_init.c | 213 | ||||
| -rw-r--r-- | drivers/staging/isdn/hysdn/hysdn_net.c | 330 | ||||
| -rw-r--r-- | drivers/staging/isdn/hysdn/hysdn_pof.h | 78 | ||||
| -rw-r--r-- | drivers/staging/isdn/hysdn/hysdn_procconf.c | 411 | ||||
| -rw-r--r-- | drivers/staging/isdn/hysdn/hysdn_proclog.c | 357 | ||||
| -rw-r--r-- | drivers/staging/isdn/hysdn/hysdn_sched.c | 197 | ||||
| -rw-r--r-- | drivers/staging/isdn/hysdn/ince1pc.h | 134 |
14 files changed, 0 insertions, 3759 deletions
diff --git a/drivers/staging/isdn/hysdn/Kconfig b/drivers/staging/isdn/hysdn/Kconfig deleted file mode 100644 index 4c8a9283b9dd..000000000000 --- a/drivers/staging/isdn/hysdn/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config HYSDN - tristate "Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)" - depends on m && PROC_FS && PCI - help - Say Y here if you have one of Hypercope's active PCI ISDN cards - Champ, Ergo and Metro. You will then get a module called hysdn. - Please read the file <file:Documentation/isdn/hysdn.rst> for more - information. - -config HYSDN_CAPI - bool "HYSDN CAPI 2.0 support" - depends on HYSDN && ISDN_CAPI - help - Say Y here if you like to use Hypercope's CAPI 2.0 interface. diff --git a/drivers/staging/isdn/hysdn/Makefile b/drivers/staging/isdn/hysdn/Makefile deleted file mode 100644 index e01f17f22ebb..000000000000 --- a/drivers/staging/isdn/hysdn/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# Makefile for the hysdn ISDN device driver - -# Each configuration option enables a list of files. - -obj-$(CONFIG_HYSDN) += hysdn.o - -# Multipart objects. - -hysdn-y := hysdn_procconf.o hysdn_proclog.o boardergo.o \ - hysdn_boot.o hysdn_sched.o hysdn_net.o hysdn_init.o -hysdn-$(CONFIG_HYSDN_CAPI) += hycapi.o diff --git a/drivers/staging/isdn/hysdn/boardergo.c b/drivers/staging/isdn/hysdn/boardergo.c deleted file mode 100644 index 2aa2a0e08247..000000000000 --- a/drivers/staging/isdn/hysdn/boardergo.c +++ /dev/null @@ -1,445 +0,0 @@ -/* $Id: boardergo.c,v 1.5.6.7 2001/11/06 21:58:19 kai Exp $ - * - * Linux driver for HYSDN cards, specific routines for ergo type boards. - * - * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH - * Copyright 1999 by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * As all Linux supported cards Champ2, Ergo and Metro2/4 use the same - * DPRAM interface and layout with only minor differences all related - * stuff is done here, not in separate modules. - * - */ - -#include <linux/signal.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/vmalloc.h> -#include <linux/delay.h> -#include <asm/io.h> - -#include "hysdn_defs.h" -#include "boardergo.h" - -#define byteout(addr, val) outb(val, addr) -#define bytein(addr) inb(addr) - -/***************************************************/ -/* The cards interrupt handler. Called from system */ -/***************************************************/ -static irqreturn_t -ergo_interrupt(int intno, void *dev_id) -{ - hysdn_card *card = dev_id; /* parameter from irq */ - tErgDpram *dpr; - unsigned long flags; - unsigned char volatile b; - - if (!card) - return IRQ_NONE; /* error -> spurious interrupt */ - if (!card->irq_enabled) - return IRQ_NONE; /* other device interrupting or irq switched off */ - - spin_lock_irqsave(&card->hysdn_lock, flags); /* no further irqs allowed */ - - if (!(bytein(card->iobase + PCI9050_INTR_REG) & PCI9050_INTR_REG_STAT1)) { - spin_unlock_irqrestore(&card->hysdn_lock, flags); /* restore old state */ - return IRQ_NONE; /* no interrupt requested by E1 */ - } - /* clear any pending ints on the board */ - dpr = card->dpram; - b = dpr->ToPcInt; /* clear for ergo */ - b |= dpr->ToPcIntMetro; /* same for metro */ - b |= dpr->ToHyInt; /* and for champ */ - - /* start kernel task immediately after leaving all interrupts */ - if (!card->hw_lock) - schedule_work(&card->irq_queue); - spin_unlock_irqrestore(&card->hysdn_lock, flags); - return IRQ_HANDLED; -} /* ergo_interrupt */ - -/******************************************************************************/ -/* ergo_irq_bh will be called as part of the kernel clearing its shared work */ -/* queue sometime after a call to schedule_work has been made passing our */ -/* work_struct. This task is the only one handling data transfer from or to */ -/* the card after booting. The task may be queued from everywhere */ -/* (interrupts included). */ -/******************************************************************************/ -static void -ergo_irq_bh(struct work_struct *ugli_api) -{ - hysdn_card *card = container_of(ugli_api, hysdn_card, irq_queue); - tErgDpram *dpr; - int again; - unsigned long flags; - - if (card->state != CARD_STATE_RUN) - return; /* invalid call */ - - dpr = card->dpram; /* point to DPRAM */ - - spin_lock_irqsave(&card->hysdn_lock, flags); - if (card->hw_lock) { - spin_unlock_irqrestore(&card->hysdn_lock, flags); /* hardware currently unavailable */ - return; - } - card->hw_lock = 1; /* we now lock the hardware */ - - do { - again = 0; /* assume loop not to be repeated */ - - if (!dpr->ToHyFlag) { - /* we are able to send a buffer */ - - if (hysdn_sched_tx(card, dpr->ToHyBuf, &dpr->ToHySize, &dpr->ToHyChannel, - ERG_TO_HY_BUF_SIZE)) { - dpr->ToHyFlag = 1; /* enable tx */ - again = 1; /* restart loop */ - } - } /* we are able to send a buffer */ - if (dpr->ToPcFlag) { - /* a message has arrived for us, handle it */ - - if (hysdn_sched_rx(card, dpr->ToPcBuf, dpr->ToPcSize, dpr->ToPcChannel)) { - dpr->ToPcFlag = 0; /* we worked the data */ - again = 1; /* restart loop */ - } - } /* a message has arrived for us */ - if (again) { - dpr->ToHyInt = 1; - dpr->ToPcInt = 1; /* interrupt to E1 for all cards */ - } else - card->hw_lock = 0; /* free hardware again */ - } while (again); /* until nothing more to do */ - - spin_unlock_irqrestore(&card->hysdn_lock, flags); -} /* ergo_irq_bh */ - - -/*********************************************************/ -/* stop the card (hardware reset) and disable interrupts */ -/*********************************************************/ -static void -ergo_stopcard(hysdn_card *card) -{ - unsigned long flags; - unsigned char val; - - hysdn_net_release(card); /* first release the net device if existing */ -#ifdef CONFIG_HYSDN_CAPI - hycapi_capi_stop(card); -#endif /* CONFIG_HYSDN_CAPI */ - spin_lock_irqsave(&card->hysdn_lock, flags); - val = bytein(card->iobase + PCI9050_INTR_REG); /* get actual value */ - val &= ~(PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1); /* mask irq */ - byteout(card->iobase + PCI9050_INTR_REG, val); - card->irq_enabled = 0; - byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RESET); /* reset E1 processor */ - card->state = CARD_STATE_UNUSED; - card->err_log_state = ERRLOG_STATE_OFF; /* currently no log active */ - - spin_unlock_irqrestore(&card->hysdn_lock, flags); -} /* ergo_stopcard */ - -/**************************************************************************/ -/* enable or disable the cards error log. The event is queued if possible */ -/**************************************************************************/ -static void -ergo_set_errlog_state(hysdn_card *card, int on) -{ - unsigned long flags; - - if (card->state != CARD_STATE_RUN) { - card->err_log_state = ERRLOG_STATE_OFF; /* must be off */ - return; - } - spin_lock_irqsave(&card->hysdn_lock, flags); - - if (((card->err_log_state == ERRLOG_STATE_OFF) && !on) || - ((card->err_log_state == ERRLOG_STATE_ON) && on)) { - spin_unlock_irqrestore(&card->hysdn_lock, flags); - return; /* nothing to do */ - } - if (on) - card->err_log_state = ERRLOG_STATE_START; /* request start */ - else - card->err_log_state = ERRLOG_STATE_STOP; /* request stop */ - - spin_unlock_irqrestore(&card->hysdn_lock, flags); - schedule_work(&card->irq_queue); -} /* ergo_set_errlog_state */ - -/******************************************/ -/* test the cards RAM and return 0 if ok. */ -/******************************************/ -static const char TestText[36] = "This Message is filler, why read it"; - -static int -ergo_testram(hysdn_card *card) -{ - tErgDpram *dpr = card->dpram; - - memset(dpr->TrapTable, 0, sizeof(dpr->TrapTable)); /* clear all Traps */ - dpr->ToHyInt = 1; /* E1 INTR state forced */ - - memcpy(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText, - sizeof(TestText)); - if (memcmp(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText, - sizeof(TestText))) - return (-1); - - memcpy(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText, - sizeof(TestText)); - if (memcmp(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText, - sizeof(TestText))) - return (-1); - - return (0); -} /* ergo_testram */ - -/*****************************************************************************/ -/* this function is intended to write stage 1 boot image to the cards buffer */ -/* this is done in two steps. First the 1024 hi-words are written (offs=0), */ -/* then the 1024 lo-bytes are written. The remaining DPRAM is cleared, the */ -/* PCI-write-buffers flushed and the card is taken out of reset. */ -/* The function then waits for a reaction of the E1 processor or a timeout. */ -/* Negative return values are interpreted as errors. */ -/*****************************************************************************/ -static int -ergo_writebootimg(struct HYSDN_CARD *card, unsigned char *buf, - unsigned long offs) -{ - unsigned char *dst; - tErgDpram *dpram; - int cnt = (BOOT_IMG_SIZE >> 2); /* number of words to move and swap (byte order!) */ - - if (card->debug_flags & LOG_POF_CARD) - hysdn_addlog(card, "ERGO: write bootldr offs=0x%lx ", offs); - - dst = card->dpram; /* pointer to start of DPRAM */ - dst += (offs + ERG_DPRAM_FILL_SIZE); /* offset in the DPRAM */ - while (cnt--) { - *dst++ = *(buf + 1); /* high byte */ - *dst++ = *buf; /* low byte */ - dst += 2; /* point to next longword */ - buf += 2; /* buffer only filled with words */ - } - - /* if low words (offs = 2) have been written, clear the rest of the DPRAM, */ - /* flush the PCI-write-buffer and take the E1 out of reset */ - if (offs) { - memset(card->dpram, 0, ERG_DPRAM_FILL_SIZE); /* fill the DPRAM still not cleared */ - dpram = card->dpram; /* get pointer to dpram structure */ - dpram->ToHyNoDpramErrLog = 0xFF; /* write a dpram register */ - while (!dpram->ToHyNoDpramErrLog); /* reread volatile register to flush PCI */ - - byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RUN); /* start E1 processor */ - /* the interrupts are still masked */ - - msleep_interruptible(20); /* Timeout 20ms */ - - if (((tDpramBootSpooler *) card->dpram)->Len != DPRAM_SPOOLER_DATA_SIZE) { - if (card->debug_flags & LOG_POF_CARD) - hysdn_addlog(card, "ERGO: write bootldr no answer"); - return (-ERR_BOOTIMG_FAIL); - } - } /* start_boot_img */ - return (0); /* successful */ -} /* ergo_writebootimg */ - -/********************************************************************************/ -/* ergo_writebootseq writes the buffer containing len bytes to the E1 processor */ -/* using the boot spool mechanism. If everything works fine 0 is returned. In */ -/* case of errors a negative error value is returned. */ -/********************************************************************************/ -static int -ergo_writebootseq(struct HYSDN_CARD *card, unsigned char *buf, int len) -{ - tDpramBootSpooler *sp = (tDpramBootSpooler *) card->dpram; - unsigned char *dst; - unsigned char buflen; - int nr_write; - unsigned char tmp_rdptr; - unsigned char wr_mirror; - int i; - - if (card->debug_flags & LOG_POF_CARD) - hysdn_addlog(card, "ERGO: write boot seq len=%d ", len); - - dst = sp->Data; /* point to data in spool structure */ - buflen = sp->Len; /* maximum len of spooled data */ - wr_mirror = sp->WrPtr; /* only once read */ - - /* try until all bytes written or error */ - i = 0x1000; /* timeout value */ - while (len) { - - /* first determine the number of bytes that may be buffered */ - do { - tmp_rdptr = sp->RdPtr; /* first read the pointer */ - i--; /* decrement timeout */ - } while (i && (tmp_rdptr != sp->RdPtr)); /* wait for stable pointer */ - - if (!i) { - if (card->debug_flags & LOG_POF_CARD) - hysdn_addlog(card, "ERGO: write boot seq timeout"); - return (-ERR_BOOTSEQ_FAIL); /* value not stable -> timeout */ - } - if ((nr_write = tmp_rdptr - wr_mirror - 1) < 0) - nr_write += buflen; /* now we got number of free bytes - 1 in buffer */ - - if (!nr_write) - continue; /* no free bytes in buffer */ - - if (nr_write > len) - nr_write = len; /* limit if last few bytes */ - i = 0x1000; /* reset timeout value */ - - /* now we know how much bytes we may put in the puffer */ - len -= nr_write; /* we savely could adjust len before output */ - while (nr_write--) { - *(dst + wr_mirror) = *buf++; /* output one byte */ - if (++wr_mirror >= buflen) - wr_mirror = 0; - sp->WrPtr = wr_mirror; /* announce the next byte to E1 */ - } /* while (nr_write) */ - - } /* while (len) */ - return (0); -} /* ergo_writebootseq */ - -/***********************************************************************************/ -/* ergo_waitpofready waits for a maximum of 10 seconds for the completition of the */ -/* boot process. If the process has been successful 0 is returned otherwise a */ -/* negative error code is returned. */ -/***********************************************************************************/ -static int -ergo_waitpofready(struct HYSDN_CARD *card) -{ - tErgDpram *dpr = card->dpram; /* pointer to DPRAM structure */ - int timecnt = 10000 / 50; /* timeout is 10 secs max. */ - unsigned long flags; - int msg_size; - int i; - - if (card->debug_flags & LOG_POF_CARD) - hysdn_addlog(card, "ERGO: waiting for pof ready"); - while (timecnt--) { - /* wait until timeout */ - - if (dpr->ToPcFlag) { - /* data has arrived */ - - if ((dpr->ToPcChannel != CHAN_SYSTEM) || - (dpr->ToPcSize < MIN_RDY_MSG_SIZE) || - (dpr->ToPcSize > MAX_RDY_MSG_SIZE) || - ((*(unsigned long *) dpr->ToPcBuf) != RDY_MAGIC)) - break; /* an error occurred */ - - /* Check for additional data delivered during SysReady */ - msg_size = dpr->ToPcSize - RDY_MAGIC_SIZE; - if (msg_size > 0) - if (EvalSysrTokData(card, dpr->ToPcBuf + RDY_MAGIC_SIZE, msg_size)) - break; - - if (card->debug_flags & LOG_POF_RECORD) - hysdn_addlog(card, "ERGO: pof boot success"); - spin_lock_irqsave(&card->hysdn_lock, flags); - - card->state = CARD_STATE_RUN; /* now card is running */ - /* enable the cards interrupt */ - byteout(card->iobase + PCI9050_INTR_REG, - bytein(card->iobase + PCI9050_INTR_REG) | - (PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1)); - card->irq_enabled = 1; /* we are ready to receive interrupts */ - - dpr->ToPcFlag = 0; /* reset data indicator */ - dpr->ToHyInt = 1; - dpr->ToPcInt = 1; /* interrupt to E1 for all cards */ - - spin_unlock_irqrestore(&card->hysdn_lock, flags); - if ((hynet_enable & (1 << card->myid)) - && (i = hysdn_net_create(card))) - { - ergo_stopcard(card); - card->state = CARD_STATE_BOOTERR; - return (i); - } -#ifdef CONFIG_HYSDN_CAPI - if ((i = hycapi_capi_create(card))) { - printk(KERN_WARNING "HYSDN: failed to create capi-interface.\n"); - } -#endif /* CONFIG_HYSDN_CAPI */ - return (0); /* success */ - } /* data has arrived */ - msleep_interruptible(50); /* Timeout 50ms */ - } /* wait until timeout */ - - if (card->debug_flags & LOG_POF_CARD) - hysdn_addlog(card, "ERGO: pof boot ready timeout"); - return (-ERR_POF_TIMEOUT); -} /* ergo_waitpofready */ - - - -/************************************************************************************/ -/* release the cards hardware. Before releasing do a interrupt disable and hardware */ -/* reset. Also unmap dpram. */ -/* Use only during module release. */ -/************************************************************************************/ -static void -ergo_releasehardware(hysdn_card *card) -{ - ergo_stopcard(card); /* first stop the card if not already done */ - free_irq(card->irq, card); /* release interrupt */ - release_region(card->iobase + PCI9050_INTR_REG, 1); /* release all io ports */ - release_region(card->iobase + PCI9050_USER_IO, 1); - iounmap(card->dpram); - card->dpram = NULL; /* release shared mem */ -} /* ergo_releasehardware */ - - -/*********************************************************************************/ -/* acquire the needed hardware ports and map dpram. If an error occurs a nonzero */ -/* value is returned. */ -/* Use only during module init. */ -/*********************************************************************************/ -int -ergo_inithardware(hysdn_card *card) -{ - if (!request_region(card->iobase + PCI9050_INTR_REG, 1, "HYSDN")) - return (-1); - if (!request_region(card->iobase + PCI9050_USER_IO, 1, "HYSDN")) { - release_region(card->iobase + PCI9050_INTR_REG, 1); - return (-1); /* ports already in use */ - } - card->memend = card->membase + ERG_DPRAM_PAGE_SIZE - 1; - if (!(card->dpram = ioremap(card->membase, ERG_DPRAM_PAGE_SIZE))) { - release_region(card->iobase + PCI9050_INTR_REG, 1); - release_region(card->iobase + PCI9050_USER_IO, 1); - return (-1); - } - - ergo_stopcard(card); /* disable interrupts */ - if (request_irq(card->irq, ergo_interrupt, IRQF_SHARED, "HYSDN", card)) { - ergo_releasehardware(card); /* return the acquired hardware */ - return (-1); - } - /* success, now setup the function pointers */ - card->stopcard = ergo_stopcard; - card->releasehardware = ergo_releasehardware; - card->testram = ergo_testram; - card->writebootimg = ergo_writebootimg; - card->writebootseq = ergo_writebootseq; - card->waitpofready = ergo_waitpofready; - card->set_errlog_state = ergo_set_errlog_state; - INIT_WORK(&card->irq_queue, ergo_irq_bh); - spin_lock_init(&card->hysdn_lock); - - return (0); -} /* ergo_inithardware */ diff --git a/drivers/staging/isdn/hysdn/boardergo.h b/drivers/staging/isdn/hysdn/boardergo.h deleted file mode 100644 index e99bd81c4034..000000000000 --- a/drivers/staging/isdn/hysdn/boardergo.h +++ /dev/null @@ -1,100 +0,0 @@ -/* $Id: boardergo.h,v 1.2.6.1 2001/09/23 22:24:54 kai Exp $ - * - * Linux driver for HYSDN cards, definitions for ergo type boards (buffers..). - * - * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH - * Copyright 1999 by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - - -/************************************************/ -/* defines for the dual port memory of the card */ -/************************************************/ -#define ERG_DPRAM_PAGE_SIZE 0x2000 /* DPRAM occupies a 8K page */ -#define BOOT_IMG_SIZE 4096 -#define ERG_DPRAM_FILL_SIZE (ERG_DPRAM_PAGE_SIZE - BOOT_IMG_SIZE) - -#define ERG_TO_HY_BUF_SIZE 0x0E00 /* 3072 bytes buffer size to card */ -#define ERG_TO_PC_BUF_SIZE 0x0E00 /* 3072 bytes to PC, too */ - -/* following DPRAM layout copied from OS2-driver boarderg.h */ -typedef struct ErgDpram_tag { - /*0000 */ unsigned char ToHyBuf[ERG_TO_HY_BUF_SIZE]; - /*0E00 */ unsigned char ToPcBuf[ERG_TO_PC_BUF_SIZE]; - - /*1C00 */ unsigned char bSoftUart[SIZE_RSV_SOFT_UART]; - /* size 0x1B0 */ - - /*1DB0 *//* tErrLogEntry */ unsigned char volatile ErrLogMsg[64]; - /* size 64 bytes */ - /*1DB0 unsigned long ulErrType; */ - /*1DB4 unsigned long ulErrSubtype; */ - /*1DB8 unsigned long ucTextSize; */ - /*1DB9 unsigned long ucText[ERRLOG_TEXT_SIZE]; *//* ASCIIZ of len ucTextSize-1 */ - /*1DF0 */ - - /*1DF0 */ unsigned short volatile ToHyChannel; - /*1DF2 */ unsigned short volatile ToHySize; - /*1DF4 */ unsigned char volatile ToHyFlag; - /* !=0: msg for Hy waiting */ - /*1DF5 */ unsigned char volatile ToPcFlag; - /* !=0: msg for PC waiting */ - /*1DF6 */ unsigned short volatile ToPcChannel; - /*1DF8 */ unsigned short volatile ToPcSize; - /*1DFA */ unsigned char bRes1DBA[0x1E00 - 0x1DFA]; - /* 6 bytes */ - - /*1E00 */ unsigned char bRestOfEntryTbl[0x1F00 - 0x1E00]; - /*1F00 */ unsigned long TrapTable[62]; - /*1FF8 */ unsigned char bRes1FF8[0x1FFB - 0x1FF8]; - /* low part of reset vetor */ - /*1FFB */ unsigned char ToPcIntMetro; - /* notes: - * - metro has 32-bit boot ram - accessing - * ToPcInt and ToHyInt would be the same; - * so we moved ToPcInt to 1FFB. - * Because on the PC side both vars are - * readonly (reseting on int from E1 to PC), - * we can read both vars on both cards - * without destroying anything. - * - 1FFB is the high byte of the reset vector, - * so E1 side should NOT change this byte - * when writing! - */ - /*1FFC */ unsigned char volatile ToHyNoDpramErrLog; - /* note: ToHyNoDpramErrLog is used to inform - * boot loader, not to use DPRAM based - * ErrLog; when DOS driver is rewritten - * this becomes obsolete - */ - /*1FFD */ unsigned char bRes1FFD; - /*1FFE */ unsigned char ToPcInt; - /* E1_intclear; on CHAMP2: E1_intset */ - /*1FFF */ unsigned char ToHyInt; - /* E1_intset; on CHAMP2: E1_intclear */ -} tErgDpram; - -/**********************************************/ -/* PCI9050 controller local register offsets: */ -/* copied from boarderg.c */ -/**********************************************/ -#define PCI9050_INTR_REG 0x4C /* Interrupt register */ -#define PCI9050_USER_IO 0x51 /* User I/O register */ - -/* bitmask for PCI9050_INTR_REG: */ -#define PCI9050_INTR_REG_EN1 0x01 /* 1= enable (def.), 0= disable */ -#define PCI9050_INTR_REG_POL1 0x02 /* 1= active high (def.), 0= active low */ -#define PCI9050_INTR_REG_STAT1 0x04 /* 1= intr. active, 0= intr. not active (def.) */ -#define PCI9050_INTR_REG_ENPCI 0x40 /* 1= PCI interrupts enable (def.) */ - -/* bitmask for PCI9050_USER_IO: */ -#define PCI9050_USER_IO_EN3 0x02 /* 1= disable , 0= enable (def.) */ -#define PCI9050_USER_IO_DIR3 0x04 /* 1= output (def.), 0= input */ -#define PCI9050_USER_IO_DAT3 0x08 /* 1= high (def.) , 0= low */ - -#define PCI9050_E1_RESET (PCI9050_USER_IO_DIR3) /* 0x04 */ -#define PCI9050_E1_RUN (PCI9050_USER_IO_DAT3 | PCI9050_USER_IO_DIR3) /* 0x0C */ diff --git a/drivers/staging/isdn/hysdn/hycapi.c b/drivers/staging/isdn/hysdn/hycapi.c deleted file mode 100644 index a2c15cd7bf67..000000000000 --- a/drivers/staging/isdn/hysdn/hycapi.c +++ /dev/null @@ -1,785 +0,0 @@ -/* $Id: hycapi.c,v 1.8.6.4 2001/09/23 22:24:54 kai Exp $ - * - * Linux driver for HYSDN cards, CAPI2.0-Interface. - * - * Author Ulrich Albrecht <u.albrecht@hypercope.de> for Hypercope GmbH - * Copyright 2000 by Hypercope GmbH - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include <linux/module.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/signal.h> -#include <linux/kernel.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/slab.h> - -#define VER_DRIVER 0 -#define VER_CARDTYPE 1 -#define VER_HWID 2 -#define VER_SERIAL 3 -#define VER_OPTION 4 -#define VER_PROTO 5 -#define VER_PROFILE 6 -#define VER_CAPI 7 - -#include "hysdn_defs.h" -#include <linux/kernelcapi.h> - -static char hycapi_revision[] = "$Revision: 1.8.6.4 $"; - -unsigned int hycapi_enable = 0xffffffff; -module_param(hycapi_enable, uint, 0); - -typedef struct _hycapi_appl { - unsigned int ctrl_mask; - capi_register_params rp; - struct sk_buff *listen_req[CAPI_MAXCONTR]; -} hycapi_appl; - -static hycapi_appl hycapi_applications[CAPI_MAXAPPL]; - -static u16 hycapi_send_message(struct capi_ctr *ctrl, struct sk_buff *skb); - -static inline int _hycapi_appCheck(int app_id, int ctrl_no) -{ - if ((ctrl_no <= 0) || (ctrl_no > CAPI_MAXCONTR) || (app_id <= 0) || - (app_id > CAPI_MAXAPPL)) - { - printk(KERN_ERR "HYCAPI: Invalid request app_id %d for controller %d", app_id, ctrl_no); - return -1; - } - return ((hycapi_applications[app_id - 1].ctrl_mask & (1 << (ctrl_no-1))) != 0); -} - -/****************************** -Kernel-Capi callback reset_ctr -******************************/ - -static void -hycapi_reset_ctr(struct capi_ctr *ctrl) -{ - hycapictrl_info *cinfo = ctrl->driverdata; - -#ifdef HYCAPI_PRINTFNAMES - printk(KERN_NOTICE "HYCAPI hycapi_reset_ctr\n"); -#endif - capilib_release(&cinfo->ncci_head); - capi_ctr_down(ctrl); -} - -/****************************** -Kernel-Capi callback remove_ctr -******************************/ - -static void -hycapi_remove_ctr(struct capi_ctr *ctrl) -{ - int i; - hycapictrl_info *cinfo = NULL; - hysdn_card *card = NULL; -#ifdef HYCAPI_PRINTFNAMES - printk(KERN_NOTICE "HYCAPI hycapi_remove_ctr\n"); -#endif - cinfo = (hycapictrl_info *)(ctrl->driverdata); - if (!cinfo) { - printk(KERN_ERR "No hycapictrl_info set!"); - return; - } - card = cinfo->card; - capi_ctr_suspend_output(ctrl); - for (i = 0; i < CAPI_MAXAPPL; i++) { - if (hycapi_applications[i].listen_req[ctrl->cnr - 1]) { - kfree_skb(hycapi_applications[i].listen_req[ctrl->cnr - 1]); - hycapi_applications[i].listen_req[ctrl->cnr - 1] = NULL; - } - } - detach_capi_ctr(ctrl); - ctrl->driverdata = NULL; - kfree(card->hyctrlinfo); - - - card->hyctrlinfo = NULL; -} - -/*********************************************************** - -Queue a CAPI-message to the controller. - -***********************************************************/ - -static void -hycapi_sendmsg_internal(struct capi_ctr *ctrl, struct sk_buff *skb) -{ - hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata); - hysdn_card *card = cinfo->card; - - spin_lock_irq(&cinfo->lock); -#ifdef HYCAPI_PRINTFNAMES - printk(KERN_NOTICE "hycapi_send_message\n"); -#endif - cinfo->skbs[cinfo->in_idx++] = skb; /* add to buffer list */ - if (cinfo->in_idx >= HYSDN_MAX_CAPI_SKB) - cinfo->in_idx = 0; /* wrap around */ - cinfo->sk_count++; /* adjust counter */ - if (cinfo->sk_count >= HYSDN_MAX_CAPI_SKB) { - /* inform upper layers we're full */ - printk(KERN_ERR "HYSDN Card%d: CAPI-buffer overrun!\n", - card->myid); - capi_ctr_suspend_output(ctrl); - } - cinfo->tx_skb = skb; - spin_unlock_irq(&cinfo->lock); - schedule_work(&card->irq_queue); -} - -/*********************************************************** -hycapi_register_internal - -Send down the CAPI_REGISTER-Command to the controller. -This functions will also be used if the adapter has been rebooted to -re-register any applications in the private list. - -************************************************************/ - -static void -hycapi_register_internal(struct capi_ctr *ctrl, __u16 appl, - capi_register_params *rp) -{ - char ExtFeatureDefaults[] = "49 /0/0/0/0,*/1,*/2,*/3,*/4,*/5,*/6,*/7,*/8,*/9,*"; - hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata); - hysdn_card *card = cinfo->card; - struct sk_buff *skb; - __u16 len; - __u8 _command = 0xa0, _subcommand = 0x80; - __u16 MessageNumber = 0x0000; - __u16 MessageBufferSize = 0; - int slen = strlen(ExtFeatureDefaults); -#ifdef HYCAPI_PRINTFNAMES - printk(KERN_NOTICE "hycapi_register_appl\n"); -#endif - MessageBufferSize = rp->level3cnt * rp->datablkcnt * rp->datablklen; - - len = CAPI_MSG_BASELEN + 8 + slen + 1; - if (!(skb = alloc_skb(len, GFP_ATOMIC))) { - printk(KERN_ERR "HYSDN card%d: memory squeeze in hycapi_register_appl\n", - card->myid); - return; - } - skb_put_data(skb, &len, sizeof(__u16)); - skb_put_data(skb, &appl, sizeof(__u16)); - skb_put_data(skb, &_command, sizeof(__u8)); - skb_put_data(skb, &_subcommand, sizeof(__u8)); - skb_put_data(skb, &MessageNumber, sizeof(__u16)); - skb_put_data(skb, &MessageBufferSize, sizeof(__u16)); - skb_put_data(skb, &(rp->level3cnt), sizeof(__u16)); - skb_put_data(skb, &(rp->datablkcnt), sizeof(__u16)); - skb_put_data(skb, &(rp->datablklen), sizeof(__u16)); - skb_put_data(skb, ExtFeatureDefaults, slen); - hycapi_applications[appl - 1].ctrl_mask |= (1 << (ctrl->cnr - 1)); - hycapi_send_message(ctrl, skb); -} - -/************************************************************ -hycapi_restart_internal - -After an adapter has been rebootet, re-register all applications and -send a LISTEN_REQ (if there has been such a thing ) - -*************************************************************/ - -static void hycapi_restart_internal(struct capi_ctr *ctrl) -{ - int i; - struct sk_buff *skb; -#ifdef HYCAPI_PRINTFNAMES - printk(KERN_WARNING "HYSDN: hycapi_restart_internal"); -#endif - for (i = 0; i < CAPI_MAXAPPL; i++) { - if (_hycapi_appCheck(i + 1, ctrl->cnr) == 1) { - hycapi_register_internal(ctrl, i + 1, - &hycapi_applications[i].rp); - if (hycapi_applications[i].listen_req[ctrl->cnr - 1]) { - skb = skb_copy(hycapi_applications[i].listen_req[ctrl->cnr - 1], GFP_ATOMIC); - hycapi_sendmsg_internal(ctrl, skb); - } - } - } -} - -/************************************************************* -Register an application. -Error-checking is done for CAPI-compliance. - -The application is recorded in the internal list. -*************************************************************/ - -static void -hycapi_register_appl(struct capi_ctr *ctrl, __u16 appl, - capi_register_params *rp) -{ - int MaxLogicalConnections = 0, MaxBDataBlocks = 0, MaxBDataLen = 0; - hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata); - hysdn_card *card = cinfo->card; - int chk = _hycapi_appCheck(appl, ctrl->cnr); - if (chk < 0) { - return; - } - if (chk == 1) { - printk(KERN_INFO "HYSDN: apl %d already registered\n", appl); - return; - } - MaxBDataBlocks = rp->datablkcnt > CAPI_MAXDATAWINDOW ? CAPI_MAXDATAWINDOW : rp->datablkcnt; - rp->datablkcnt = MaxBDataBlocks; - MaxBDataLen = rp->datablklen < 1024 ? 1024 : rp->datablklen; - rp->datablklen = MaxBDataLen; - - MaxLogicalConnections = rp->level3cnt; - if (MaxLogicalConnections < 0) { - MaxLogicalConnections = card->bchans * -MaxLogicalConnections; - } - if (MaxLogicalConnections == 0) { - MaxLogicalConnections = card->bchans; - } - - rp->level3cnt = MaxLogicalConnections; - memcpy(&hycapi_applications[appl - 1].rp, - rp, sizeof(capi_register_params)); -} - -/********************************************************************* - -hycapi_release_internal - -Send down a CAPI_RELEASE to the controller. -*********************************************************************/ - -static void hycapi_release_internal(struct capi_ctr *ctrl, __u16 appl) -{ - hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata); - hysdn_card *card = cinfo->card; - struct sk_buff *skb; - __u16 len; - __u8 _command = 0xa1, _subcommand = 0x80; - __u16 MessageNumber = 0x0000; - - capilib_release_appl(&cinfo->ncci_head, appl); - -#ifdef HYCAPI_PRINTFNAMES - printk(KERN_NOTICE "hycapi_release_appl\n"); -#endif - len = CAPI_MSG_BASELEN; - if (!(skb = alloc_skb(len, GFP_ATOMIC))) { - printk(KERN_ERR "HYSDN card%d: memory squeeze in hycapi_register_appl\n", - card->myid); - return; - } - skb_put_data(skb, &len, sizeof(__u16)); - skb_put_data(skb, &appl, sizeof(__u16)); - skb_put_data(skb, &_command, sizeof(__u8)); - skb_put_data(skb, &_subcommand, sizeof(__u8)); - skb_put_data(skb, &MessageNumber, sizeof(__u16)); - hycapi_send_message(ctrl, skb); - hycapi_applications[appl - 1].ctrl_mask &= ~(1 << (ctrl->cnr - 1)); -} - -/****************************************************************** -hycapi_release_appl - -Release the application from the internal list an remove it's -registration at controller-level -******************************************************************/ - -static void -hycapi_release_appl(struct capi_ctr *ctrl, __u16 appl) -{ - int chk; - - chk = _hycapi_appCheck(appl, ctrl->cnr); - if (chk < 0) { - printk(KERN_ERR "HYCAPI: Releasing invalid appl %d on controller %d\n", appl, ctrl->cnr); - return; - } - if (hycapi_applications[appl - 1].listen_req[ctrl->cnr - 1]) { - kfree_skb(hycapi_applications[appl - 1].listen_req[ctrl->cnr - 1]); - hycapi_applications[appl - 1].listen_req[ctrl->cnr - 1] = NULL; - } - if (chk == 1) - { - hycapi_release_internal(ctrl, appl); - } -} - - -/************************************************************** -Kill a single controller. -**************************************************************/ - -int hycapi_capi_release(hysdn_card *card) -{ - hycapictrl_info *cinfo = card->hyctrlinfo; - struct capi_ctr *ctrl; -#ifdef HYCAPI_PRINTFNAMES - printk(KERN_NOTICE "hycapi_capi_release\n"); -#endif - if (cinfo) { - ctrl = &cinfo->capi_ctrl; - hycapi_remove_ctr(ctrl); - } - return 0; -} - -/************************************************************** -hycapi_capi_stop - -Stop CAPI-Output on a card. (e.g. during reboot) -***************************************************************/ - -int hycapi_capi_stop(hysdn_card *card) -{ - hycapictrl_info *cinfo = card->hyctrlinfo; - struct capi_ctr *ctrl; -#ifdef HYCAPI_PRINTFNAMES - printk(KERN_NOTICE "hycapi_capi_stop\n"); -#endif - if (cinfo) { - ctrl = &cinfo->capi_ctrl; -/* ctrl->suspend_output(ctrl); */ - capi_ctr_down(ctrl); - } - return 0; -} - -/*************************************************************** -hycapi_send_message - -Send a message to the controller. - -Messages are parsed for their Command/Subcommand-type, and appropriate -action's are performed. - -Note that we have to muck around with a 64Bit-DATA_REQ as there are -firmware-releases that do not check the MsgLen-Indication! - -***************************************************************/ - -static u16 hycapi_send_message(struct capi_ctr *ctrl, struct sk_buff *skb) -{ - __u16 appl_id; - int _len, _len2; - __u8 msghead[64]; - hycapictrl_info *cinfo = ctrl->driverdata; - u16 retval = CAPI_NOERROR; - - appl_id = CAPIMSG_APPID(skb->data); - switch (_hycapi_appCheck(appl_id, ctrl->cnr)) - { - case 0: -/* printk(KERN_INFO "Need to register\n"); */ - hycapi_register_internal(ctrl, - appl_id, - &(hycapi_applications[appl_id - 1].rp)); - break; - case 1: - break; - default: - printk(KERN_ERR "HYCAPI: Controller mixup!\n"); - retval = CAPI_ILLAPPNR; - goto out; - } - switch (CAPIMSG_CMD(skb->data)) { - case CAPI_DISCONNECT_B3_RESP: - capilib_free_ncci(&cinfo->ncci_head, appl_id, - CAPIMSG_NCCI(skb->data)); - break; - case CAPI_DATA_B3_REQ: - _len = CAPIMSG_LEN(skb->data); - if (_len > 22) { - _len2 = _len - 22; - skb_copy_from_linear_data(skb, msghead, 22); - skb_copy_to_linear_data_offset(skb, _len2, - msghead, 22); - skb_pull(skb, _len2); - CAPIMSG_SETLEN(skb->data, 22); - retval = capilib_data_b3_req(&cinfo->ncci_head, - CAPIMSG_APPID(skb->data), - CAPIMSG_NCCI(skb->data), - CAPIMSG_MSGID(skb->data)); - } - break; - case CAPI_LISTEN_REQ: - if (hycapi_applications[appl_id - 1].listen_req[ctrl->cnr - 1]) - { - kfree_skb(hycapi_applications[appl_id - 1].listen_req[ctrl->cnr - 1]); - hycapi_applications[appl_id - 1].listen_req[ctrl->cnr - 1] = NULL; - } - if (!(hycapi_applications[appl_id -1].listen_req[ctrl->cnr - 1] = skb_copy(skb, GFP_ATOMIC))) - { - printk(KERN_ERR "HYSDN: memory squeeze in private_listen\n"); - } - break; - default: - break; - } -out: - if (retval == CAPI_NOERROR) - hycapi_sendmsg_internal(ctrl, skb); - else - dev_kfree_skb_any(skb); - - return retval; -} - -static int hycapi_proc_show(struct seq_file *m, void *v) -{ - struct capi_ctr *ctrl = m->private; - hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata); - hysdn_card *card = cinfo->card; - char *s; - - seq_printf(m, "%-16s %s\n", "name", cinfo->cardname); - seq_printf(m, "%-16s 0x%x\n", "io", card->iobase); - seq_printf(m, "%-16s %d\n", "irq", card->irq); - - switch (card->brdtype) { - case BD_PCCARD: s = "HYSDN Hycard"; break; - case BD_ERGO: s = "HYSDN Ergo2"; break; - case BD_METRO: s = "HYSDN Metro4"; break; - case BD_CHAMP2: s = "HYSDN Champ2"; break; - case BD_PLEXUS: s = "HYSDN Plexus30"; break; - default: s = "???"; break; - } - seq_printf(m, "%-16s %s\n", "type", s); - if ((s = cinfo->version[VER_DRIVER]) != NULL) - seq_printf(m, "%-16s %s\n", "ver_driver", s); - if ((s = cinfo->version[VER_CARDTYPE]) != NULL) - seq_printf(m, "%-16s %s\n", "ver_cardtype", s); - if ((s = cinfo->version[VER_SERIAL]) != NULL) - seq_printf(m, "%-16s %s\n", "ver_serial", s); - - seq_printf(m, "%-16s %s\n", "cardname", cinfo->cardname); - - return 0; -} - -/************************************************************** -hycapi_load_firmware - -This does NOT load any firmware, but the callback somehow is needed -on capi-interface registration. - -**************************************************************/ - -static int hycapi_load_firmware(struct capi_ctr *ctrl, capiloaddata *data) -{ -#ifdef HYCAPI_PRINTFNAMES - printk(KERN_NOTICE "hycapi_load_firmware\n"); -#endif - return 0; -} - - -static char *hycapi_procinfo(struct capi_ctr *ctrl) -{ - hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata); -#ifdef HYCAPI_PRINTFNAMES - printk(KERN_NOTICE "%s\n", __func__); -#endif - if (!cinfo) - return ""; - sprintf(cinfo->infobuf, "%s %s 0x%x %d %s", - cinfo->cardname[0] ? cinfo->cardname : "-", - cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-", - cinfo->card ? cinfo->card->iobase : 0x0, - cinfo->card ? cinfo->card->irq : 0, - hycapi_revision - ); - return cinfo->infobuf; -} - -/****************************************************************** -hycapi_rx_capipkt - -Receive a capi-message. - -All B3_DATA_IND are converted to 64K-extension compatible format. -New nccis are created if necessary. -*******************************************************************/ - -void -hycapi_rx_capipkt(hysdn_card *card, unsigned char *buf, unsigned short len) -{ - struct sk_buff *skb; - hycapictrl_info *cinfo = card->hyctrlinfo; - struct capi_ctr *ctrl; - __u16 ApplId; - __u16 MsgLen, info; - __u16 len2, CapiCmd; - __u32 CP64[2] = {0, 0}; -#ifdef HYCAPI_PRINTFNAMES - printk(KERN_NOTICE "hycapi_rx_capipkt\n"); -#endif - if (!cinfo) { - return; - } - ctrl = &cinfo->capi_ctrl; - if (len < CAPI_MSG_BASELEN) { - printk(KERN_ERR "HYSDN Card%d: invalid CAPI-message, length %d!\n", - card->myid, len); - return; - } - MsgLen = CAPIMSG_LEN(buf); - ApplId = CAPIMSG_APPID(buf); - CapiCmd = CAPIMSG_CMD(buf); - - if ((CapiCmd == CAPI_DATA_B3_IND) && (MsgLen < 30)) { - len2 = len + (30 - MsgLen); - if (!(skb = alloc_skb(len2, GFP_ATOMIC))) { - printk(KERN_ERR "HYSDN Card%d: incoming packet dropped\n", - card->myid); - return; - } - skb_put_data(skb, buf, MsgLen); - skb_put_data(skb, CP64, 2 * sizeof(__u32)); - skb_put_data(skb, buf + MsgLen, len - MsgLen); - CAPIMSG_SETLEN(skb->data, 30); - } else { - if (!(skb = alloc_skb(len, GFP_ATOMIC))) { - printk(KERN_ERR "HYSDN Card%d: incoming packet dropped\n", - card->myid); - return; - } - skb_put_data(skb, buf, len); - } - switch (CAPIMSG_CMD(skb->data)) - { - case CAPI_CONNECT_B3_CONF: -/* Check info-field for error-indication: */ - info = CAPIMSG_U16(skb->data, 12); - switch (info) - { - case 0: - capilib_new_ncci(&cinfo->ncci_head, ApplId, CAPIMSG_NCCI(skb->data), - hycapi_applications[ApplId - 1].rp.datablkcnt); - - break; - case 0x0001: - printk(KERN_ERR "HYSDN Card%d: NCPI not supported by current " - "protocol. NCPI ignored.\n", card->myid); - break; - case 0x2001: - printk(KERN_ERR "HYSDN Card%d: Message not supported in" - " current state\n", card->myid); - break; - case 0x2002: - printk(KERN_ERR "HYSDN Card%d: invalid PLCI\n", card->myid); - break; - case 0x2004: - printk(KERN_ERR "HYSDN Card%d: out of NCCI\n", card->myid); - break; - case 0x3008: - printk(KERN_ERR "HYSDN Card%d: NCPI not supported\n", - card->myid); - break; - default: - printk(KERN_ERR "HYSDN Card%d: Info in CONNECT_B3_CONF: %d\n", - card->myid, info); - break; - } - break; - case CAPI_CONNECT_B3_IND: - capilib_new_ncci(&cinfo->ncci_head, ApplId, - CAPIMSG_NCCI(skb->data), - hycapi_applications[ApplId - 1].rp.datablkcnt); - break; - case CAPI_DATA_B3_CONF: - capilib_data_b3_conf(&cinfo->ncci_head, ApplId, - CAPIMSG_NCCI(skb->data), - CAPIMSG_MSGID(skb->data)); - break; - default: - break; - } - capi_ctr_handle_message(ctrl, ApplId, skb); -} - -/****************************************************************** -hycapi_tx_capiack - -Internally acknowledge a msg sent. This will remove the msg from the -internal queue. - -*******************************************************************/ - -void hycapi_tx_capiack(hysdn_card *card) -{ - hycapictrl_info *cinfo = card->hyctrlinfo; -#ifdef HYCAPI_PRINTFNAMES - printk(KERN_NOTICE "hycapi_tx_capiack\n"); -#endif - if (!cinfo) { - return; - } - spin_lock_irq(&cinfo->lock); - kfree_skb(cinfo->skbs[cinfo->out_idx]); /* free skb */ - cinfo->skbs[cinfo->out_idx++] = NULL; - if (cinfo->out_idx >= HYSDN_MAX_CAPI_SKB) - cinfo->out_idx = 0; /* wrap around */ - - if (cinfo->sk_count-- == HYSDN_MAX_CAPI_SKB) /* dec usage count */ - capi_ctr_resume_output(&cinfo->capi_ctrl); - spin_unlock_irq(&cinfo->lock); -} - -/*************************************************************** -hycapi_tx_capiget(hysdn_card *card) - -This is called when polling for messages to SEND. - -****************************************************************/ - -struct sk_buff * -hycapi_tx_capiget(hysdn_card *card) -{ - hycapictrl_info *cinfo = card->hyctrlinfo; - if (!cinfo) { - return (struct sk_buff *)NULL; - } - if (!cinfo->sk_count) - return (struct sk_buff *)NULL; /* nothing available */ - - return (cinfo->skbs[cinfo->out_idx]); /* next packet to send */ -} - - -/********************************************************** -int hycapi_init() - -attach the capi-driver to the kernel-capi. - -***********************************************************/ - -int hycapi_init(void) -{ - int i; - for (i = 0; i < CAPI_MAXAPPL; i++) { - memset(&(hycapi_applications[i]), 0, sizeof(hycapi_appl)); - } - return (0); -} - -/************************************************************** -hycapi_cleanup(void) - -detach the capi-driver to the kernel-capi. Actually this should -free some more ressources. Do that later. -**************************************************************/ - -void -hycapi_cleanup(void) -{ -} - -/******************************************************************** -hycapi_capi_create(hysdn_card *card) - -Attach the card with its capi-ctrl. -*********************************************************************/ - -static void hycapi_fill_profile(hysdn_card *card) -{ - hycapictrl_info *cinfo = NULL; - struct capi_ctr *ctrl = NULL; - cinfo = card->hyctrlinfo; - if (!cinfo) return; - ctrl = &cinfo->capi_ctrl; - strcpy(ctrl->manu, "Hypercope"); - ctrl->version.majorversion = 2; - ctrl->version.minorversion = 0; - ctrl->version.majormanuversion = 3; - ctrl->version.minormanuversion = 2; - ctrl->profile.ncontroller = card->myid; - ctrl->profile.nbchannel = card->bchans; - ctrl->profile.goptions = GLOBAL_OPTION_INTERNAL_CONTROLLER | - GLOBAL_OPTION_B_CHANNEL_OPERATION; - ctrl->profile.support1 = B1_PROT_64KBIT_HDLC | - (card->faxchans ? B1_PROT_T30 : 0) | - B1_PROT_64KBIT_TRANSPARENT; - ctrl->profile.support2 = B2_PROT_ISO7776 | - (card->faxchans ? B2_PROT_T30 : 0) | - B2_PROT_TRANSPARENT; - ctrl->profile.support3 = B3_PROT_TRANSPARENT | - B3_PROT_T90NL | - (card->faxchans ? B3_PROT_T30 : 0) | - (card->faxchans ? B3_PROT_T30EXT : 0) | - B3_PROT_ISO8208; -} - -int -hycapi_capi_create(hysdn_card *card) -{ - hycapictrl_info *cinfo = NULL; - struct capi_ctr *ctrl = NULL; - int retval; -#ifdef HYCAPI_PRINTFNAMES - printk(KERN_NOTICE "hycapi_capi_create\n"); -#endif - if ((hycapi_enable & (1 << card->myid)) == 0) { - return 1; - } - if (!card->hyctrlinfo) { - cinfo = kzalloc(sizeof(hycapictrl_info), GFP_ATOMIC); - if (!cinfo) { - printk(KERN_WARNING "HYSDN: no memory for capi-ctrl.\n"); - return -ENOMEM; - } - card->hyctrlinfo = cinfo; - cinfo->card = card; - spin_lock_init(&cinfo->lock); - INIT_LIST_HEAD(&cinfo->ncci_head); - - switch (card->brdtype) { - case BD_PCCARD: strcpy(cinfo->cardname, "HYSDN Hycard"); break; - case BD_ERGO: strcpy(cinfo->cardname, "HYSDN Ergo2"); break; - case BD_METRO: strcpy(cinfo->cardname, "HYSDN Metro4"); break; - case BD_CHAMP2: strcpy(cinfo->cardname, "HYSDN Champ2"); break; - case BD_PLEXUS: strcpy(cinfo->cardname, "HYSDN Plexus30"); break; - default: strcpy(cinfo->cardname, "HYSDN ???"); break; - } - - ctrl = &cinfo->capi_ctrl; - ctrl->driver_name = "hycapi"; - ctrl->driverdata = cinfo; - ctrl->register_appl = hycapi_register_appl; - ctrl->release_appl = hycapi_release_appl; - ctrl->send_message = hycapi_send_message; - ctrl->load_firmware = hycapi_load_firmware; - ctrl->reset_ctr = hycapi_reset_ctr; - ctrl->procinfo = hycapi_procinfo; - ctrl->proc_show = hycapi_proc_show; - strcpy(ctrl->name, cinfo->cardname); - ctrl->owner = THIS_MODULE; - - retval = attach_capi_ctr(ctrl); - if (retval) { - printk(KERN_ERR "hycapi: attach controller failed.\n"); - return -EBUSY; - } - /* fill in the blanks: */ - hycapi_fill_profile(card); - capi_ctr_ready(ctrl); - } else { - /* resume output on stopped ctrl */ - ctrl = &card->hyctrlinfo->capi_ctrl; - hycapi_fill_profile(card); - capi_ctr_ready(ctrl); - hycapi_restart_internal(ctrl); -/* ctrl->resume_output(ctrl); */ - } - return 0; -} diff --git a/drivers/staging/isdn/hysdn/hysdn_boot.c b/drivers/staging/isdn/hysdn/hysdn_boot.c deleted file mode 100644 index ba177c3a621b..000000000000 --- a/drivers/staging/isdn/hysdn/hysdn_boot.c +++ /dev/null @@ -1,400 +0,0 @@ -/* $Id: hysdn_boot.c,v 1.4.6.4 2001/09/23 22:24:54 kai Exp $ - * - * Linux driver for HYSDN cards - * specific routines for booting and pof handling - * - * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH - * Copyright 1999 by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include <linux/vmalloc.h> -#include <linux/slab.h> -#include <linux/uaccess.h> - -#include "hysdn_defs.h" -#include "hysdn_pof.h" - -/********************************/ -/* defines for pof read handler */ -/********************************/ -#define POF_READ_FILE_HEAD 0 -#define POF_READ_TAG_HEAD 1 -#define POF_READ_TAG_DATA 2 - -/************************************************************/ -/* definition of boot specific data area. This data is only */ -/* needed during boot and so allocated dynamically. */ -/************************************************************/ -struct boot_data { - unsigned short Cryptor; /* for use with Decrypt function */ - unsigned short Nrecs; /* records remaining in file */ - unsigned char pof_state;/* actual state of read handler */ - unsigned char is_crypted;/* card data is crypted */ - int BufSize; /* actual number of bytes bufferd */ - int last_error; /* last occurred error */ - unsigned short pof_recid;/* actual pof recid */ - unsigned long pof_reclen;/* total length of pof record data */ - unsigned long pof_recoffset;/* actual offset inside pof record */ - union { - unsigned char BootBuf[BOOT_BUF_SIZE];/* buffer as byte count */ - tPofRecHdr PofRecHdr; /* header for actual record/chunk */ - tPofFileHdr PofFileHdr; /* header from POF file */ - tPofTimeStamp PofTime; /* time information */ - } buf; -}; - -/*****************************************************/ -/* start decryption of successive POF file chuncks. */ -/* */ -/* to be called at start of POF file reading, */ -/* before starting any decryption on any POF record. */ -/*****************************************************/ -static void -StartDecryption(struct boot_data *boot) -{ - boot->Cryptor = CRYPT_STARTTERM; -} /* StartDecryption */ - - -/***************************************************************/ -/* decrypt complete BootBuf */ -/* NOTE: decryption must be applied to all or none boot tags - */ -/* to HI and LO boot loader and (all) seq tags, because */ -/* global Cryptor is started for whole POF. */ -/***************************************************************/ -static void -DecryptBuf(struct boot_data *boot, int cnt) -{ - unsigned char *bufp = boot->buf.BootBuf; - - while (cnt--) { - boot->Cryptor = (boot->Cryptor >> 1) ^ ((boot->Cryptor & 1U) ? CRYPT_FEEDTERM : 0); - *bufp++ ^= (unsigned char)boot->Cryptor; - } -} /* DecryptBuf */ - -/********************************************************************************/ -/* pof_handle_data executes the required actions dependent on the active record */ -/* id. If successful 0 is returned, a negative value shows an error. */ -/********************************************************************************/ -static int -pof_handle_data(hysdn_card *card, int datlen) -{ - struct boot_data *boot = card->boot; /* pointer to boot specific data */ - long l; - unsigned char *imgp; - int img_len; - - /* handle the different record types */ - switch (boot->pof_recid) { - - case TAG_TIMESTMP: - if (card->debug_flags & LOG_POF_RECORD) - hysdn_addlog(card, "POF created %s", boot->buf.PofTime.DateTimeText); - break; - - case TAG_CBOOTDTA: - DecryptBuf(boot, datlen); /* we need to encrypt the buffer */ - /* fall through */ - case TAG_BOOTDTA: - if (card->debug_flags & LOG_POF_RECORD) - hysdn_addlog(card, "POF got %s len=%d offs=0x%lx", - (boot->pof_recid == TAG_CBOOTDTA) ? "CBOOTDATA" : "BOOTDTA", - datlen, boot->pof_recoffset); - - if (boot->pof_reclen != POF_BOOT_LOADER_TOTAL_SIZE) { - boot->last_error = EPOF_BAD_IMG_SIZE; /* invalid length */ - return (boot->last_error); - } - imgp = boot->buf.BootBuf; /* start of buffer */ - img_len = datlen; /* maximum length to transfer */ - - l = POF_BOOT_LOADER_OFF_IN_PAGE - - (boot->pof_recoffset & (POF_BOOT_LOADER_PAGE_SIZE - 1)); - if (l > 0) { - /* buffer needs to be truncated */ - imgp += l; /* advance pointer */ - img_len -= l; /* adjust len */ - } - /* at this point no special handling for data wrapping over buffer */ - /* is necessary, because the boot image always will be adjusted to */ - /* match a page boundary inside the buffer. */ - /* The buffer for the boot image on the card is filled in 2 cycles */ - /* first the 1024 hi-words are put in the buffer, then the low 1024 */ - /* word are handled in the same way with different offset. */ - - if (img_len > 0) { - /* data available for copy */ - if ((boot->last_error = - card->writebootimg(card, imgp, - (boot->pof_recoffset > POF_BOOT_LOADER_PAGE_SIZE) ? 2 : 0)) < 0) - return (boot->last_error); - } - break; /* end of case boot image hi/lo */ - - case TAG_CABSDATA: - DecryptBuf(boot, datlen); /* we need to encrypt the buffer */ - /* fall through */ - case TAG_ABSDATA: - if (card->debug_flags & LOG_POF_RECORD) - hysdn_addlog(card, "POF got %s len=%d offs=0x%lx", - (boot->pof_recid == TAG_CABSDATA) ? "CABSDATA" : "ABSDATA", - datlen, boot->pof_recoffset); - - if ((boot->last_error = card->writebootseq(card, boot->buf.BootBuf, datlen)) < 0) - return (boot->last_error); /* error writing data */ - - if (boot->pof_recoffset + datlen >= boot->pof_reclen) - return (card->waitpofready(card)); /* data completely spooled, wait for ready */ - - break; /* end of case boot seq data */ - - default: - if (card->debug_flags & LOG_POF_RECORD) - hysdn_addlog(card, "POF got data(id=0x%lx) len=%d offs=0x%lx", boot->pof_recid, - datlen, boot->pof_recoffset); - - break; /* simply skip record */ - } /* switch boot->pof_recid */ - - return (0); -} /* pof_handle_data */ - - -/******************************************************************************/ -/* pof_write_buffer is called when the buffer has been filled with the needed */ -/* number of data bytes. The number delivered is additionally supplied for */ -/* verification. The functions handles the data and returns the needed number */ -/* of bytes for the next action. If the returned value is 0 or less an error */ -/* occurred and booting must be aborted. */ -/******************************************************************************/ -int -pof_write_buffer(hysdn_card *card, int datlen) -{ - struct boot_data *boot = card->boot; /* pointer to boot specific data */ - - if (!boot) - return (-EFAULT); /* invalid call */ - if (boot->last_error < 0) - return (boot->last_error); /* repeated error */ - - if (card->debug_flags & LOG_POF_WRITE) - hysdn_addlog(card, "POF write: got %d bytes ", datlen); - - switch (boot->pof_state) { - case POF_READ_FILE_HEAD: - if (card->debug_flags & LOG_POF_WRITE) - hysdn_addlog(card, "POF write: checking file header"); - - if (datlen != sizeof(tPofFileHdr)) { - boot->last_error = -EPOF_INTERNAL; - break; - } - if (boot->buf.PofFileHdr.Magic != TAGFILEMAGIC) { - boot->last_error = -EPOF_BAD_MAGIC; - break; - } - /* Setup the new state and vars */ - boot->Nrecs = (unsigned short)(boot->buf.PofFileHdr.N_PofRecs); /* limited to 65535 */ - boot->pof_state = POF_READ_TAG_HEAD; /* now start with single tags */ - boot->last_error = sizeof(tPofRecHdr); /* new length */ - break; - - case POF_READ_TAG_HEAD: - if (card->debug_flags & LOG_POF_WRITE) - hysdn_addlog(card, "POF write: checking tag header"); - - if (datlen != sizeof(tPofRecHdr)) { - boot->last_error = -EPOF_INTERNAL; - break; - } - boot->pof_recid = boot->buf.PofRecHdr.PofRecId; /* actual pof recid */ - boot->pof_reclen = boot->buf.PofRecHdr.PofRecDataLen; /* total length */ - boot->pof_recoffset = 0; /* no starting offset */ - - if (card->debug_flags & LOG_POF_RECORD) - hysdn_addlog(card, "POF: got record id=0x%lx length=%ld ", - boot->pof_recid, boot->pof_reclen); - - boot->pof_state = POF_READ_TAG_DATA; /* now start with tag data */ - if (boot->pof_reclen < BOOT_BUF_SIZE) - boot->last_error = boot->pof_reclen; /* limit size */ - else - boot->last_error = BOOT_BUF_SIZE; /* maximum */ - - if (!boot->last_error) { /* no data inside record */ - boot->pof_state = POF_READ_TAG_HEAD; /* now start with single tags */ - boot->last_error = sizeof(tPofRecHdr); /* new length */ - } - break; - - case POF_READ_TAG_DATA: - if (card->debug_flags & LOG_POF_WRITE) - hysdn_addlog(card, "POF write: getting tag data"); - - if (datlen != boot->last_error) { - boot->last_error = -EPOF_INTERNAL; - break; - } - if ((boot->last_error = pof_handle_data(card, datlen)) < 0) - return (boot->last_error); /* an error occurred */ - boot->pof_recoffset += datlen; - if (boot->pof_recoffset >= boot->pof_reclen) { - boot->pof_state = POF_READ_TAG_HEAD; /* now start with single tags */ - boot->last_error = sizeof(tPofRecHdr); /* new length */ - } else { - if (boot->pof_reclen - boot->pof_recoffset < BOOT_BUF_SIZE) - boot->last_error = boot->pof_reclen - boot->pof_recoffset; /* limit size */ - else - boot->last_error = BOOT_BUF_SIZE; /* maximum */ - } - break; - - default: - boot->last_error = -EPOF_INTERNAL; /* unknown state */ - break; - } /* switch (boot->pof_state) */ - - return (boot->last_error); -} /* pof_write_buffer */ - - -/*******************************************************************************/ -/* pof_write_open is called when an open for boot on the cardlog device occurs. */ -/* The function returns the needed number of bytes for the next operation. If */ -/* the returned number is less or equal 0 an error specified by this code */ -/* occurred. Additionally the pointer to the buffer data area is set on success */ -/*******************************************************************************/ -int -pof_write_open(hysdn_card *card, unsigned char **bufp) -{ - struct boot_data *boot; /* pointer to boot specific data */ - - if (card->boot) { - if (card->debug_flags & LOG_POF_OPEN) - hysdn_addlog(card, "POF open: already opened for boot"); - return (-ERR_ALREADY_BOOT); /* boot already active */ - } - /* error no mem available */ - if (!(boot = kzalloc(sizeof(struct boot_data), GFP_KERNEL))) { - if (card->debug_flags & LOG_MEM_ERR) - hysdn_addlog(card, "POF open: unable to allocate mem"); - return (-EFAULT); - } - card->boot = boot; - card->state = CARD_STATE_BOOTING; - - card->stopcard(card); /* first stop the card */ - if (card->testram(card)) { - if (card->debug_flags & LOG_POF_OPEN) - hysdn_addlog(card, "POF open: DPRAM test failure"); - boot->last_error = -ERR_BOARD_DPRAM; - card->state = CARD_STATE_BOOTERR; /* show boot error */ - return (boot->last_error); - } - boot->BufSize = 0; /* Buffer is empty */ - boot->pof_state = POF_READ_FILE_HEAD; /* read file header */ - StartDecryption(boot); /* if POF File should be encrypted */ - - if (card->debug_flags & LOG_POF_OPEN) - hysdn_addlog(card, "POF open: success"); - - *bufp = boot->buf.BootBuf; /* point to buffer */ - return (sizeof(tPofFileHdr)); -} /* pof_write_open */ - -/********************************************************************************/ -/* pof_write_close is called when an close of boot on the cardlog device occurs. */ -/* The return value must be 0 if everything has happened as desired. */ -/********************************************************************************/ -int -pof_write_close(hysdn_card *card) -{ - struct boot_data *boot = card->boot; /* pointer to boot specific data */ - - if (!boot) - return (-EFAULT); /* invalid call */ - - card->boot = NULL; /* no boot active */ - kfree(boot); - - if (card->state == CARD_STATE_RUN) - card->set_errlog_state(card, 1); /* activate error log */ - - if (card->debug_flags & LOG_POF_OPEN) - hysdn_addlog(card, "POF close: success"); - - return (0); -} /* pof_write_close */ - -/*********************************************************************************/ -/* EvalSysrTokData checks additional records delivered with the Sysready Message */ -/* when POF has been booted. A return value of 0 is used if no error occurred. */ -/*********************************************************************************/ -int -EvalSysrTokData(hysdn_card *card, unsigned char *cp, int len) -{ - u_char *p; - u_char crc; - - if (card->debug_flags & LOG_POF_RECORD) - hysdn_addlog(card, "SysReady Token data length %d", len); - - if (len < 2) { - hysdn_addlog(card, "SysReady Token Data to short"); - return (1); - } - for (p = cp, crc = 0; p < (cp + len - 2); p++) - if ((crc & 0x80)) - crc = (((u_char) (crc << 1)) + 1) + *p; - else - crc = ((u_char) (crc << 1)) + *p; - crc = ~crc; - if (crc != *(cp + len - 1)) { - hysdn_addlog(card, "SysReady Token Data invalid CRC"); - return (1); - } - len--; /* don't check CRC byte */ - while (len > 0) { - - if (*cp == SYSR_TOK_END) - return (0); /* End of Token stream */ - - if (len < (*(cp + 1) + 2)) { - hysdn_addlog(card, "token 0x%x invalid length %d", *cp, *(cp + 1)); - return (1); - } - switch (*cp) { - case SYSR_TOK_B_CHAN: /* 1 */ - if (*(cp + 1) != 1) - return (1); /* length invalid */ - card->bchans = *(cp + 2); - break; - - case SYSR_TOK_FAX_CHAN: /* 2 */ - if (*(cp + 1) != 1) - return (1); /* length invalid */ - card->faxchans = *(cp + 2); - break; - - case SYSR_TOK_MAC_ADDR: /* 3 */ - if (*(cp + 1) != 6) - return (1); /* length invalid */ - memcpy(card->mac_addr, cp + 2, 6); - break; - - default: - hysdn_addlog(card, "unknown token 0x%02x length %d", *cp, *(cp + 1)); - break; - } - len -= (*(cp + 1) + 2); /* adjust len */ - cp += (*(cp + 1) + 2); /* and pointer */ - } - - hysdn_addlog(card, "no end token found"); - return (1); -} /* EvalSysrTokData */ diff --git a/drivers/staging/isdn/hysdn/hysdn_defs.h b/drivers/staging/isdn/hysdn/hysdn_defs.h deleted file mode 100644 index cdac46a21692..000000000000 --- a/drivers/staging/isdn/hysdn/hysdn_defs.h +++ /dev/null @@ -1,282 +0,0 @@ -/* $Id: hysdn_defs.h,v 1.5.6.3 2001/09/23 22:24:54 kai Exp $ - * - * Linux driver for HYSDN cards - * global definitions and exported vars and functions. - * - * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH - * Copyright 1999 by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#ifndef HYSDN_DEFS_H -#define HYSDN_DEFS_H - -#include <linux/hysdn_if.h> -#include <linux/interrupt.h> -#include <linux/workqueue.h> -#include <linux/skbuff.h> - -#include "ince1pc.h" - -#ifdef CONFIG_HYSDN_CAPI -#include <linux/capi.h> -#include <linux/isdn/capicmd.h> -#include <linux/isdn/capiutil.h> -#include <linux/isdn/capilli.h> - -/***************************/ -/* CAPI-Profile values. */ -/***************************/ - -#define GLOBAL_OPTION_INTERNAL_CONTROLLER 0x0001 -#define GLOBAL_OPTION_EXTERNAL_CONTROLLER 0x0002 -#define GLOBAL_OPTION_HANDSET 0x0004 -#define GLOBAL_OPTION_DTMF 0x0008 -#define GLOBAL_OPTION_SUPPL_SERVICES 0x0010 -#define GLOBAL_OPTION_CHANNEL_ALLOCATION 0x0020 -#define GLOBAL_OPTION_B_CHANNEL_OPERATION 0x0040 - -#define B1_PROT_64KBIT_HDLC 0x0001 -#define B1_PROT_64KBIT_TRANSPARENT 0x0002 -#define B1_PROT_V110_ASYNCH 0x0004 -#define B1_PROT_V110_SYNCH 0x0008 -#define B1_PROT_T30 0x0010 -#define B1_PROT_64KBIT_INV_HDLC 0x0020 -#define B1_PROT_56KBIT_TRANSPARENT 0x0040 - -#define B2_PROT_ISO7776 0x0001 -#define B2_PROT_TRANSPARENT 0x0002 -#define B2_PROT_SDLC 0x0004 -#define B2_PROT_LAPD 0x0008 -#define B2_PROT_T30 0x0010 -#define B2_PROT_PPP 0x0020 -#define B2_PROT_TRANSPARENT_IGNORE_B1_FRAMING_ERRORS 0x0040 - -#define B3_PROT_TRANSPARENT 0x0001 -#define B3_PROT_T90NL 0x0002 -#define B3_PROT_ISO8208 0x0004 -#define B3_PROT_X25_DCE 0x0008 -#define B3_PROT_T30 0x0010 -#define B3_PROT_T30EXT 0x0020 - -#define HYSDN_MAXVERSION 8 - -/* Number of sendbuffers in CAPI-queue */ -#define HYSDN_MAX_CAPI_SKB 20 - -#endif /* CONFIG_HYSDN_CAPI*/ - -/************************************************/ -/* constants and bits for debugging/log outputs */ -/************************************************/ -#define LOG_MAX_LINELEN 120 -#define DEB_OUT_SYSLOG 0x80000000 /* output to syslog instead of proc fs */ -#define LOG_MEM_ERR 0x00000001 /* log memory errors like kmalloc failure */ -#define LOG_POF_OPEN 0x00000010 /* log pof open and close activities */ -#define LOG_POF_RECORD 0x00000020 /* log pof record parser */ -#define LOG_POF_WRITE 0x00000040 /* log detailed pof write operation */ -#define LOG_POF_CARD 0x00000080 /* log pof related card functions */ -#define LOG_CNF_LINE 0x00000100 /* all conf lines are put to procfs */ -#define LOG_CNF_DATA 0x00000200 /* non comment conf lines are shown with channel */ -#define LOG_CNF_MISC 0x00000400 /* additional conf line debug outputs */ -#define LOG_SCHED_ASYN 0x00001000 /* debug schedulers async tx routines */ -#define LOG_PROC_OPEN 0x00100000 /* open and close from procfs are logged */ -#define LOG_PROC_ALL 0x00200000 /* all actions from procfs are logged */ -#define LOG_NET_INIT 0x00010000 /* network init and deinit logging */ - -#define DEF_DEB_FLAGS 0x7fff000f /* everything is logged to procfs */ - -/**********************************/ -/* proc filesystem name constants */ -/**********************************/ -#define PROC_SUBDIR_NAME "hysdn" -#define PROC_CONF_BASENAME "cardconf" -#define PROC_LOG_BASENAME "cardlog" - -/***********************************/ -/* PCI 32 bit parms for IO and MEM */ -/***********************************/ -#define PCI_REG_PLX_MEM_BASE 0 -#define PCI_REG_PLX_IO_BASE 1 -#define PCI_REG_MEMORY_BASE 3 - -/**************/ -/* card types */ -/**************/ -#define BD_NONE 0U -#define BD_PERFORMANCE 1U -#define BD_VALUE 2U -#define BD_PCCARD 3U -#define BD_ERGO 4U -#define BD_METRO 5U -#define BD_CHAMP2 6U -#define BD_PLEXUS 7U - -/******************************************************/ -/* defined states for cards shown by reading cardconf */ -/******************************************************/ -#define CARD_STATE_UNUSED 0 /* never been used or booted */ -#define CARD_STATE_BOOTING 1 /* booting is in progress */ -#define CARD_STATE_BOOTERR 2 /* a previous boot was aborted */ -#define CARD_STATE_RUN 3 /* card is active */ - -/*******************************/ -/* defines for error_log_state */ -/*******************************/ -#define ERRLOG_STATE_OFF 0 /* error log is switched off, nothing to do */ -#define ERRLOG_STATE_ON 1 /* error log is switched on, wait for data */ -#define ERRLOG_STATE_START 2 /* start error logging */ -#define ERRLOG_STATE_STOP 3 /* stop error logging */ - -/*******************************/ -/* data structure for one card */ -/*******************************/ -typedef struct HYSDN_CARD { - - /* general variables for the cards */ - int myid; /* own driver card id */ - unsigned char bus; /* pci bus the card is connected to */ - unsigned char devfn; /* slot+function bit encoded */ - unsigned short subsysid;/* PCI subsystem id */ - unsigned char brdtype; /* type of card */ - unsigned int bchans; /* number of available B-channels */ - unsigned int faxchans; /* number of available fax-channels */ - unsigned char mac_addr[6];/* MAC Address read from card */ - unsigned int irq; /* interrupt number */ - unsigned int iobase; /* IO-port base address */ - unsigned long plxbase; /* PLX memory base */ - unsigned long membase; /* DPRAM memory base */ - unsigned long memend; /* DPRAM memory end */ - void *dpram; /* mapped dpram */ - int state; /* actual state of card -> CARD_STATE_** */ - struct HYSDN_CARD *next; /* pointer to next card */ - - /* data areas for the /proc file system */ - void *proclog; /* pointer to proclog filesystem specific data */ - void *procconf; /* pointer to procconf filesystem specific data */ - - /* debugging and logging */ - unsigned char err_log_state;/* actual error log state of the card */ - unsigned long debug_flags;/* tells what should be debugged and where */ - void (*set_errlog_state) (struct HYSDN_CARD *, int); - - /* interrupt handler + interrupt synchronisation */ - struct work_struct irq_queue; /* interrupt task queue */ - unsigned char volatile irq_enabled;/* interrupt enabled if != 0 */ - unsigned char volatile hw_lock;/* hardware is currently locked -> no access */ - - /* boot process */ - void *boot; /* pointer to boot private data */ - int (*writebootimg) (struct HYSDN_CARD *, unsigned char *, unsigned long); - int (*writebootseq) (struct HYSDN_CARD *, unsigned char *, int); - int (*waitpofready) (struct HYSDN_CARD *); - int (*testram) (struct HYSDN_CARD *); - - /* scheduler for data transfer (only async parts) */ - unsigned char async_data[256];/* async data to be sent (normally for config) */ - unsigned short volatile async_len;/* length of data to sent */ - unsigned short volatile async_channel;/* channel number for async transfer */ - int volatile async_busy; /* flag != 0 sending in progress */ - int volatile net_tx_busy; /* a network packet tx is in progress */ - - /* network interface */ - void *netif; /* pointer to network structure */ - - /* init and deinit stopcard for booting, too */ - void (*stopcard) (struct HYSDN_CARD *); - void (*releasehardware) (struct HYSDN_CARD *); - - spinlock_t hysdn_lock; -#ifdef CONFIG_HYSDN_CAPI - struct hycapictrl_info { - char cardname[32]; - spinlock_t lock; - int versionlen; - char versionbuf[1024]; - char *version[HYSDN_MAXVERSION]; - - char infobuf[128]; /* for function procinfo */ - - struct HYSDN_CARD *card; - struct capi_ctr capi_ctrl; - struct sk_buff *skbs[HYSDN_MAX_CAPI_SKB]; - int in_idx, out_idx; /* indexes to buffer ring */ - int sk_count; /* number of buffers currently in ring */ - struct sk_buff *tx_skb; /* buffer for tx operation */ - - struct list_head ncci_head; - } *hyctrlinfo; -#endif /* CONFIG_HYSDN_CAPI */ -} hysdn_card; - -#ifdef CONFIG_HYSDN_CAPI -typedef struct hycapictrl_info hycapictrl_info; -#endif /* CONFIG_HYSDN_CAPI */ - - -/*****************/ -/* exported vars */ -/*****************/ -extern hysdn_card *card_root; /* pointer to first card */ - - - -/*************************/ -/* im/exported functions */ -/*************************/ - -/* hysdn_procconf.c */ -extern int hysdn_procconf_init(void); /* init proc config filesys */ -extern void hysdn_procconf_release(void); /* deinit proc config filesys */ - -/* hysdn_proclog.c */ -extern int hysdn_proclog_init(hysdn_card *); /* init proc log entry */ -extern void hysdn_proclog_release(hysdn_card *); /* deinit proc log entry */ -extern void hysdn_addlog(hysdn_card *, char *, ...); /* output data to log */ -extern void hysdn_card_errlog(hysdn_card *, tErrLogEntry *, int); /* output card log */ - -/* boardergo.c */ -extern int ergo_inithardware(hysdn_card *card); /* get hardware -> module init */ - -/* hysdn_boot.c */ -extern int pof_write_close(hysdn_card *); /* close proc file after writing pof */ -extern int pof_write_open(hysdn_card *, unsigned char **); /* open proc file for writing pof */ -extern int pof_write_buffer(hysdn_card *, int); /* write boot data to card */ -extern int EvalSysrTokData(hysdn_card *, unsigned char *, int); /* Check Sysready Token Data */ - -/* hysdn_sched.c */ -extern int hysdn_sched_tx(hysdn_card *, unsigned char *, - unsigned short volatile *, unsigned short volatile *, - unsigned short); -extern int hysdn_sched_rx(hysdn_card *, unsigned char *, unsigned short, - unsigned short); -extern int hysdn_tx_cfgline(hysdn_card *, unsigned char *, - unsigned short); /* send one cfg line */ - -/* hysdn_net.c */ -extern unsigned int hynet_enable; -extern int hysdn_net_create(hysdn_card *); /* create a new net device */ -extern int hysdn_net_release(hysdn_card *); /* delete the device */ -extern char *hysdn_net_getname(hysdn_card *); /* get name of net interface */ -extern void hysdn_tx_netack(hysdn_card *); /* acknowledge a packet tx */ -extern struct sk_buff *hysdn_tx_netget(hysdn_card *); /* get next network packet */ -extern void hysdn_rx_netpkt(hysdn_card *, unsigned char *, - unsigned short); /* rxed packet from network */ - -#ifdef CONFIG_HYSDN_CAPI -extern unsigned int hycapi_enable; -extern int hycapi_capi_create(hysdn_card *); /* create a new capi device */ -extern int hycapi_capi_release(hysdn_card *); /* delete the device */ -extern int hycapi_capi_stop(hysdn_card *card); /* suspend */ -extern void hycapi_rx_capipkt(hysdn_card *card, unsigned char *buf, - unsigned short len); -extern void hycapi_tx_capiack(hysdn_card *card); -extern struct sk_buff *hycapi_tx_capiget(hysdn_card *card); -extern int hycapi_init(void); -extern void hycapi_cleanup(void); -#endif /* CONFIG_HYSDN_CAPI */ - -#endif /* HYSDN_DEFS_H */ diff --git a/drivers/staging/isdn/hysdn/hysdn_init.c b/drivers/staging/isdn/hysdn/hysdn_init.c deleted file mode 100644 index 0db2f7506250..000000000000 --- a/drivers/staging/isdn/hysdn/hysdn_init.c +++ /dev/null @@ -1,213 +0,0 @@ -/* $Id: hysdn_init.c,v 1.6.6.6 2001/09/23 22:24:54 kai Exp $ - * - * Linux driver for HYSDN cards, init functions. - * - * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH - * Copyright 1999 by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/vmalloc.h> -#include <linux/slab.h> -#include <linux/pci.h> - -#include "hysdn_defs.h" - -static struct pci_device_id hysdn_pci_tbl[] = { - { PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX, - PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_METRO, 0, 0, BD_METRO }, - { PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX, - PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2, 0, 0, BD_CHAMP2 }, - { PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX, - PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_ERGO, 0, 0, BD_ERGO }, - { PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX, - PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO, 0, 0, BD_ERGO }, - - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(pci, hysdn_pci_tbl); -MODULE_DESCRIPTION("ISDN4Linux: Driver for HYSDN cards"); -MODULE_AUTHOR("Werner Cornelius"); -MODULE_LICENSE("GPL"); - -static int cardmax; /* number of found cards */ -hysdn_card *card_root = NULL; /* pointer to first card */ -static hysdn_card *card_last = NULL; /* pointer to first card */ - - -/****************************************************************************/ -/* The module startup and shutdown code. Only compiled when used as module. */ -/* Using the driver as module is always advisable, because the booting */ -/* image becomes smaller and the driver code is only loaded when needed. */ -/* Additionally newer versions may be activated without rebooting. */ -/****************************************************************************/ - -/****************************************************************************/ -/* init_module is called once when the module is loaded to do all necessary */ -/* things like autodetect... */ -/* If the return value of this function is 0 the init has been successful */ -/* and the module is added to the list in /proc/modules, otherwise an error */ -/* is assumed and the module will not be kept in memory. */ -/****************************************************************************/ - -static int hysdn_pci_init_one(struct pci_dev *akt_pcidev, - const struct pci_device_id *ent) -{ - hysdn_card *card; - int rc; - - rc = pci_enable_device(akt_pcidev); - if (rc) - return rc; - - if (!(card = kzalloc(sizeof(hysdn_card), GFP_KERNEL))) { - printk(KERN_ERR "HYSDN: unable to alloc device mem \n"); - rc = -ENOMEM; - goto err_out; - } - card->myid = cardmax; /* set own id */ - card->bus = akt_pcidev->bus->number; - card->devfn = akt_pcidev->devfn; /* slot + function */ - card->subsysid = akt_pcidev->subsystem_device; - card->irq = akt_pcidev->irq; - card->iobase = pci_resource_start(akt_pcidev, PCI_REG_PLX_IO_BASE); - card->plxbase = pci_resource_start(akt_pcidev, PCI_REG_PLX_MEM_BASE); - card->membase = pci_resource_start(akt_pcidev, PCI_REG_MEMORY_BASE); - card->brdtype = BD_NONE; /* unknown */ - card->debug_flags = DEF_DEB_FLAGS; /* set default debug */ - card->faxchans = 0; /* default no fax channels */ - card->bchans = 2; /* and 2 b-channels */ - card->brdtype = ent->driver_data; - - if (ergo_inithardware(card)) { - printk(KERN_WARNING "HYSDN: card at io 0x%04x already in use\n", card->iobase); - rc = -EBUSY; - goto err_out_card; - } - - cardmax++; - card->next = NULL; /*end of chain */ - if (card_last) - card_last->next = card; /* pointer to next card */ - else - card_root = card; - card_last = card; /* new chain end */ - - pci_set_drvdata(akt_pcidev, card); - return 0; - -err_out_card: - kfree(card); -err_out: - pci_disable_device(akt_pcidev); - return rc; -} - -static void hysdn_pci_remove_one(struct pci_dev *akt_pcidev) -{ - hysdn_card *card = pci_get_drvdata(akt_pcidev); - - pci_set_drvdata(akt_pcidev, NULL); - - if (card->stopcard) - card->stopcard(card); - -#ifdef CONFIG_HYSDN_CAPI - hycapi_capi_release(card); -#endif - - if (card->releasehardware) - card->releasehardware(card); /* free all hardware resources */ - - if (card == card_root) { - card_root = card_root->next; - if (!card_root) - card_last = NULL; - } else { - hysdn_card *tmp = card_root; - while (tmp) { - if (tmp->next == card) - tmp->next = card->next; - card_last = tmp; - tmp = tmp->next; - } - } - - kfree(card); - pci_disable_device(akt_pcidev); -} - -static struct pci_driver hysdn_pci_driver = { - .name = "hysdn", - .id_table = hysdn_pci_tbl, - .probe = hysdn_pci_init_one, - .remove = hysdn_pci_remove_one, -}; - -static int hysdn_have_procfs; - -static int __init -hysdn_init(void) -{ - int rc; - - printk(KERN_NOTICE "HYSDN: module loaded\n"); - - rc = pci_register_driver(&hysdn_pci_driver); - if (rc) - return rc; - - printk(KERN_INFO "HYSDN: %d card(s) found.\n", cardmax); - - if (!hysdn_procconf_init()) - hysdn_have_procfs = 1; - -#ifdef CONFIG_HYSDN_CAPI - if (cardmax > 0) { - if (hycapi_init()) { - printk(KERN_ERR "HYCAPI: init failed\n"); - - if (hysdn_have_procfs) - hysdn_procconf_release(); - - pci_unregister_driver(&hysdn_pci_driver); - return -ESPIPE; - } - } -#endif /* CONFIG_HYSDN_CAPI */ - - return 0; /* no error */ -} /* init_module */ - - -/***********************************************************************/ -/* cleanup_module is called when the module is released by the kernel. */ -/* The routine is only called if init_module has been successful and */ -/* the module counter has a value of 0. Otherwise this function will */ -/* not be called. This function must release all resources still allo- */ -/* cated as after the return from this function the module code will */ -/* be removed from memory. */ -/***********************************************************************/ -static void __exit -hysdn_exit(void) -{ - if (hysdn_have_procfs) - hysdn_procconf_release(); - - pci_unregister_driver(&hysdn_pci_driver); - -#ifdef CONFIG_HYSDN_CAPI - hycapi_cleanup(); -#endif /* CONFIG_HYSDN_CAPI */ - - printk(KERN_NOTICE "HYSDN: module unloaded\n"); -} /* cleanup_module */ - -module_init(hysdn_init); -module_exit(hysdn_exit); diff --git a/drivers/staging/isdn/hysdn/hysdn_net.c b/drivers/staging/isdn/hysdn/hysdn_net.c deleted file mode 100644 index dcb9ef7a2651..000000000000 --- a/drivers/staging/isdn/hysdn/hysdn_net.c +++ /dev/null @@ -1,330 +0,0 @@ -/* $Id: hysdn_net.c,v 1.8.6.4 2001/09/23 22:24:54 kai Exp $ - * - * Linux driver for HYSDN cards, net (ethernet type) handling routines. - * - * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH - * Copyright 1999 by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * This net module has been inspired by the skeleton driver from - * Donald Becker (becker@CESDIS.gsfc.nasa.gov) - * - */ - -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/kernel.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/inetdevice.h> - -#include "hysdn_defs.h" - -unsigned int hynet_enable = 0xffffffff; -module_param(hynet_enable, uint, 0); - -#define MAX_SKB_BUFFERS 20 /* number of buffers for keeping TX-data */ - -/****************************************************************************/ -/* structure containing the complete network data. The structure is aligned */ -/* in a way that both, the device and statistics are kept inside it. */ -/* for proper access, the device structure MUST be the first var/struct */ -/* inside the definition. */ -/****************************************************************************/ -struct net_local { - /* Tx control lock. This protects the transmit buffer ring - * state along with the "tx full" state of the driver. This - * means all netif_queue flow control actions are protected - * by this lock as well. - */ - struct net_device *dev; - spinlock_t lock; - struct sk_buff *skbs[MAX_SKB_BUFFERS]; /* pointers to tx-skbs */ - int in_idx, out_idx; /* indexes to buffer ring */ - int sk_count; /* number of buffers currently in ring */ -}; /* net_local */ - - - -/*********************************************************************/ -/* Open/initialize the board. This is called (in the current kernel) */ -/* sometime after booting when the 'ifconfig' program is run. */ -/* This routine should set everything up anew at each open, even */ -/* registers that "should" only need to be set once at boot, so that */ -/* there is non-reboot way to recover if something goes wrong. */ -/*********************************************************************/ -static int -net_open(struct net_device *dev) -{ - struct in_device *in_dev; - hysdn_card *card = dev->ml_priv; - int i; - - netif_start_queue(dev); /* start tx-queueing */ - - /* Fill in the MAC-level header (if not already set) */ - if (!card->mac_addr[0]) { - for (i = 0; i < ETH_ALEN; i++) - dev->dev_addr[i] = 0xfc; - if ((in_dev = dev->ip_ptr) != NULL) { - const struct in_ifaddr *ifa; - - rcu_read_lock(); - ifa = rcu_dereference(in_dev->ifa_list); - if (ifa != NULL) - memcpy(dev->dev_addr + (ETH_ALEN - sizeof(ifa->ifa_local)), &ifa->ifa_local, sizeof(ifa->ifa_local)); - rcu_read_unlock(); - } - } else - memcpy(dev->dev_addr, card->mac_addr, ETH_ALEN); - - return (0); -} /* net_open */ - -/*******************************************/ -/* flush the currently occupied tx-buffers */ -/* must only be called when device closed */ -/*******************************************/ -static void -flush_tx_buffers(struct net_local *nl) -{ - - while (nl->sk_count) { - dev_kfree_skb(nl->skbs[nl->out_idx++]); /* free skb */ - if (nl->out_idx >= MAX_SKB_BUFFERS) - nl->out_idx = 0; /* wrap around */ - nl->sk_count--; - } -} /* flush_tx_buffers */ - - -/*********************************************************************/ -/* close/decativate the device. The device is not removed, but only */ -/* deactivated. */ -/*********************************************************************/ -static int -net_close(struct net_device *dev) -{ - - netif_stop_queue(dev); /* disable queueing */ - - flush_tx_buffers((struct net_local *) dev); - - return (0); /* success */ -} /* net_close */ - -/************************************/ -/* send a packet on this interface. */ -/* new style for kernel >= 2.3.33 */ -/************************************/ -static netdev_tx_t -net_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - struct net_local *lp = (struct net_local *) dev; - - spin_lock_irq(&lp->lock); - - lp->skbs[lp->in_idx++] = skb; /* add to buffer list */ - if (lp->in_idx >= MAX_SKB_BUFFERS) - lp->in_idx = 0; /* wrap around */ - lp->sk_count++; /* adjust counter */ - netif_trans_update(dev); - - /* If we just used up the very last entry in the - * TX ring on this device, tell the queueing - * layer to send no more. - */ - if (lp->sk_count >= MAX_SKB_BUFFERS) - netif_stop_queue(dev); - - /* When the TX completion hw interrupt arrives, this - * is when the transmit statistics are updated. - */ - - spin_unlock_irq(&lp->lock); - - if (lp->sk_count <= 3) { - schedule_work(&((hysdn_card *) dev->ml_priv)->irq_queue); - } - return NETDEV_TX_OK; /* success */ -} /* net_send_packet */ - - - -/***********************************************************************/ -/* acknowlegde a packet send. The network layer will be informed about */ -/* completion */ -/***********************************************************************/ -void -hysdn_tx_netack(hysdn_card *card) -{ - struct net_local *lp = card->netif; - - if (!lp) - return; /* non existing device */ - - - if (!lp->sk_count) - return; /* error condition */ - - lp->dev->stats.tx_packets++; - lp->dev->stats.tx_bytes += lp->skbs[lp->out_idx]->len; - - dev_kfree_skb(lp->skbs[lp->out_idx++]); /* free skb */ - if (lp->out_idx >= MAX_SKB_BUFFERS) - lp->out_idx = 0; /* wrap around */ - - if (lp->sk_count-- == MAX_SKB_BUFFERS) /* dec usage count */ - netif_start_queue((struct net_device *) lp); -} /* hysdn_tx_netack */ - -/*****************************************************/ -/* we got a packet from the network, go and queue it */ -/*****************************************************/ -void -hysdn_rx_netpkt(hysdn_card *card, unsigned char *buf, unsigned short len) -{ - struct net_local *lp = card->netif; - struct net_device *dev; - struct sk_buff *skb; - - if (!lp) - return; /* non existing device */ - - dev = lp->dev; - dev->stats.rx_bytes += len; - - skb = dev_alloc_skb(len); - if (skb == NULL) { - printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", - dev->name); - dev->stats.rx_dropped++; - return; - } - /* copy the data */ - skb_put_data(skb, buf, len); - - /* determine the used protocol */ - skb->protocol = eth_type_trans(skb, dev); - - dev->stats.rx_packets++; /* adjust packet count */ - - netif_rx(skb); -} /* hysdn_rx_netpkt */ - -/*****************************************************/ -/* return the pointer to a network packet to be send */ -/*****************************************************/ -struct sk_buff * -hysdn_tx_netget(hysdn_card *card) -{ - struct net_local *lp = card->netif; - - if (!lp) - return (NULL); /* non existing device */ - - if (!lp->sk_count) - return (NULL); /* nothing available */ - - return (lp->skbs[lp->out_idx]); /* next packet to send */ -} /* hysdn_tx_netget */ - -static const struct net_device_ops hysdn_netdev_ops = { - .ndo_open = net_open, - .ndo_stop = net_close, - .ndo_start_xmit = net_send_packet, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - - -/*****************************************************************************/ -/* hysdn_net_create creates a new net device for the given card. If a device */ -/* already exists, it will be deleted and created a new one. The return value */ -/* 0 announces success, else a negative error code will be returned. */ -/*****************************************************************************/ -int -hysdn_net_create(hysdn_card *card) -{ - struct net_device *dev; - int i; - struct net_local *lp; - - if (!card) { - printk(KERN_WARNING "No card-pt in hysdn_net_create!\n"); - return (-ENOMEM); - } - hysdn_net_release(card); /* release an existing net device */ - - dev = alloc_etherdev(sizeof(struct net_local)); - if (!dev) { - printk(KERN_WARNING "HYSDN: unable to allocate mem\n"); - return (-ENOMEM); - } - - lp = netdev_priv(dev); - lp->dev = dev; - - dev->netdev_ops = &hysdn_netdev_ops; - spin_lock_init(&((struct net_local *) dev)->lock); - - /* initialise necessary or informing fields */ - dev->base_addr = card->iobase; /* IO address */ - dev->irq = card->irq; /* irq */ - - dev->netdev_ops = &hysdn_netdev_ops; - if ((i = register_netdev(dev))) { - printk(KERN_WARNING "HYSDN: unable to create network device\n"); - free_netdev(dev); - return (i); - } - dev->ml_priv = card; /* remember pointer to own data structure */ - card->netif = dev; /* setup the local pointer */ - - if (card->debug_flags & LOG_NET_INIT) - hysdn_addlog(card, "network device created"); - return 0; /* and return success */ -} /* hysdn_net_create */ - -/***************************************************************************/ -/* hysdn_net_release deletes the net device for the given card. The return */ -/* value 0 announces success, else a negative error code will be returned. */ -/***************************************************************************/ -int -hysdn_net_release(hysdn_card *card) -{ - struct net_device *dev = card->netif; - - if (!dev) - return (0); /* non existing */ - - card->netif = NULL; /* clear out pointer */ - net_close(dev); - - flush_tx_buffers((struct net_local *) dev); /* empty buffers */ - - unregister_netdev(dev); /* release the device */ - free_netdev(dev); /* release the memory allocated */ - if (card->debug_flags & LOG_NET_INIT) - hysdn_addlog(card, "network device deleted"); - - return (0); /* always successful */ -} /* hysdn_net_release */ - -/*****************************************************************************/ -/* hysdn_net_getname returns a pointer to the name of the network interface. */ -/* if the interface is not existing, a "-" is returned. */ -/*****************************************************************************/ -char * -hysdn_net_getname(hysdn_card *card) -{ - struct net_device *dev = card->netif; - - if (!dev) - return ("-"); /* non existing */ - - return (dev->name); -} /* hysdn_net_getname */ diff --git a/drivers/staging/isdn/hysdn/hysdn_pof.h b/drivers/staging/isdn/hysdn/hysdn_pof.h deleted file mode 100644 index f63f5fa59d7e..000000000000 --- a/drivers/staging/isdn/hysdn/hysdn_pof.h +++ /dev/null @@ -1,78 +0,0 @@ -/* $Id: hysdn_pof.h,v 1.2.6.1 2001/09/23 22:24:54 kai Exp $ - * - * Linux driver for HYSDN cards, definitions used for handling pof-files. - * - * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH - * Copyright 1999 by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -/************************/ -/* POF specific defines */ -/************************/ -#define BOOT_BUF_SIZE 0x1000 /* =4096, maybe moved to other h file */ -#define CRYPT_FEEDTERM 0x8142 -#define CRYPT_STARTTERM 0x81a5 -/* max. timeout time in seconds - * from end of booting to POF is ready - */ -#define POF_READY_TIME_OUT_SEC 10 - -/**********************************/ -/* defines for 1.stage boot image */ -/**********************************/ - -/* the POF file record containing the boot loader image - * has 2 pages a 16KB: - * 1. page contains the high 16-bit part of the 32-bit E1 words - * 2. page contains the low 16-bit part of the 32-bit E1 words - * - * In each 16KB page we assume the start of the boot loader code - * in the highest 2KB part (at offset 0x3800); - * the rest (0x0000..0x37FF) is assumed to contain 0 bytes. - */ - -#define POF_BOOT_LOADER_PAGE_SIZE 0x4000 /* =16384U */ -#define POF_BOOT_LOADER_TOTAL_SIZE (2U * POF_BOOT_LOADER_PAGE_SIZE) - -#define POF_BOOT_LOADER_CODE_SIZE 0x0800 /* =2KB =2048U */ - -/* offset in boot page, where loader code may start */ -/* =0x3800= 14336U */ -#define POF_BOOT_LOADER_OFF_IN_PAGE (POF_BOOT_LOADER_PAGE_SIZE-POF_BOOT_LOADER_CODE_SIZE) - - -/*--------------------------------------POF file record structs------------*/ -typedef struct PofFileHdr_tag { /* Pof file header */ - /*00 */ unsigned long Magic __attribute__((packed)); - /*04 */ unsigned long N_PofRecs __attribute__((packed)); -/*08 */ -} tPofFileHdr; - -typedef struct PofRecHdr_tag { /* Pof record header */ - /*00 */ unsigned short PofRecId __attribute__((packed)); - /*02 */ unsigned long PofRecDataLen __attribute__((packed)); -/*06 */ -} tPofRecHdr; - -typedef struct PofTimeStamp_tag { - /*00 */ unsigned long UnixTime __attribute__((packed)); - /*04 */ unsigned char DateTimeText[0x28]; - /* =40 */ -/*2C */ -} tPofTimeStamp; - -/* tPofFileHdr.Magic value: */ -#define TAGFILEMAGIC 0x464F501AUL -/* tPofRecHdr.PofRecId values: */ -#define TAG_ABSDATA 0x1000 /* abs. data */ -#define TAG_BOOTDTA 0x1001 /* boot data */ -#define TAG_COMMENT 0x0020 -#define TAG_SYSCALL 0x0021 -#define TAG_FLOWCTRL 0x0022 -#define TAG_TIMESTMP 0x0010 /* date/time stamp of version */ -#define TAG_CABSDATA 0x1100 /* crypted abs. data */ -#define TAG_CBOOTDTA 0x1101 /* crypted boot data */ diff --git a/drivers/staging/isdn/hysdn/hysdn_procconf.c b/drivers/staging/isdn/hysdn/hysdn_procconf.c deleted file mode 100644 index 48afd9f5316e..000000000000 --- a/drivers/staging/isdn/hysdn/hysdn_procconf.c +++ /dev/null @@ -1,411 +0,0 @@ -/* $Id: hysdn_procconf.c,v 1.8.6.4 2001/09/23 22:24:54 kai Exp $ - * - * Linux driver for HYSDN cards, /proc/net filesystem dir and conf functions. - * - * written by Werner Cornelius (werner@titro.de) for Hypercope GmbH - * - * Copyright 1999 by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include <linux/cred.h> -#include <linux/module.h> -#include <linux/poll.h> -#include <linux/proc_fs.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <net/net_namespace.h> - -#include "hysdn_defs.h" - -static DEFINE_MUTEX(hysdn_conf_mutex); - -#define INFO_OUT_LEN 80 /* length of info line including lf */ - -/********************************************************/ -/* defines and data structure for conf write operations */ -/********************************************************/ -#define CONF_STATE_DETECT 0 /* waiting for detect */ -#define CONF_STATE_CONF 1 /* writing config data */ -#define CONF_STATE_POF 2 /* writing pof data */ -#define CONF_LINE_LEN 255 /* 255 chars max */ - -struct conf_writedata { - hysdn_card *card; /* card the device is connected to */ - int buf_size; /* actual number of bytes in the buffer */ - int needed_size; /* needed size when reading pof */ - int state; /* actual interface states from above constants */ - unsigned char conf_line[CONF_LINE_LEN]; /* buffered conf line */ - unsigned short channel; /* active channel number */ - unsigned char *pof_buffer; /* buffer when writing pof */ -}; - -/***********************************************************************/ -/* process_line parses one config line and transfers it to the card if */ -/* necessary. */ -/* if the return value is negative an error occurred. */ -/***********************************************************************/ -static int -process_line(struct conf_writedata *cnf) -{ - unsigned char *cp = cnf->conf_line; - int i; - - if (cnf->card->debug_flags & LOG_CNF_LINE) - hysdn_addlog(cnf->card, "conf line: %s", cp); - - if (*cp == '-') { /* option */ - cp++; /* point to option char */ - - if (*cp++ != 'c') - return (0); /* option unknown or used */ - i = 0; /* start value for channel */ - while ((*cp <= '9') && (*cp >= '0')) - i = i * 10 + *cp++ - '0'; /* get decimal number */ - if (i > 65535) { - if (cnf->card->debug_flags & LOG_CNF_MISC) - hysdn_addlog(cnf->card, "conf channel invalid %d", i); - return (-ERR_INV_CHAN); /* invalid channel */ - } - cnf->channel = i & 0xFFFF; /* set new channel number */ - return (0); /* success */ - } /* option */ - if (*cp == '*') { /* line to send */ - if (cnf->card->debug_flags & LOG_CNF_DATA) - hysdn_addlog(cnf->card, "conf chan=%d %s", cnf->channel, cp); - return (hysdn_tx_cfgline(cnf->card, cnf->conf_line + 1, - cnf->channel)); /* send the line without * */ - } /* line to send */ - return (0); -} /* process_line */ - -/***********************************/ -/* conf file operations and tables */ -/***********************************/ - -/****************************************************/ -/* write conf file -> boot or send cfg line to card */ -/****************************************************/ -static ssize_t -hysdn_conf_write(struct file *file, const char __user *buf, size_t count, loff_t *off) -{ - struct conf_writedata *cnf; - int i; - unsigned char ch, *cp; - - if (!count) - return (0); /* nothing to handle */ - - if (!(cnf = file->private_data)) - return (-EFAULT); /* should never happen */ - - if (cnf->state == CONF_STATE_DETECT) { /* auto detect cnf or pof data */ - if (copy_from_user(&ch, buf, 1)) /* get first char for detect */ - return (-EFAULT); - - if (ch == 0x1A) { - /* we detected a pof file */ - if ((cnf->needed_size = pof_write_open(cnf->card, &cnf->pof_buffer)) <= 0) - return (cnf->needed_size); /* an error occurred -> exit */ - cnf->buf_size = 0; /* buffer is empty */ - cnf->state = CONF_STATE_POF; /* new state */ - } else { - /* conf data has been detected */ - cnf->buf_size = 0; /* buffer is empty */ - cnf->state = CONF_STATE_CONF; /* requested conf data write */ - if (cnf->card->state != CARD_STATE_RUN) - return (-ERR_NOT_BOOTED); - cnf->conf_line[CONF_LINE_LEN - 1] = 0; /* limit string length */ - cnf->channel = 4098; /* default channel for output */ - } - } /* state was auto detect */ - if (cnf->state == CONF_STATE_POF) { /* pof write active */ - i = cnf->needed_size - cnf->buf_size; /* bytes still missing for write */ - if (i <= 0) - return (-EINVAL); /* size error handling pof */ - - if (i < count) - count = i; /* limit requested number of bytes */ - if (copy_from_user(cnf->pof_buffer + cnf->buf_size, buf, count)) - return (-EFAULT); /* error while copying */ - cnf->buf_size += count; - - if (cnf->needed_size == cnf->buf_size) { - cnf->needed_size = pof_write_buffer(cnf->card, cnf->buf_size); /* write data */ - if (cnf->needed_size <= 0) { - cnf->card->state = CARD_STATE_BOOTERR; /* show boot error */ - return (cnf->needed_size); /* an error occurred */ - } - cnf->buf_size = 0; /* buffer is empty again */ - } - } - /* pof write active */ - else { /* conf write active */ - - if (cnf->card->state != CARD_STATE_RUN) { - if (cnf->card->debug_flags & LOG_CNF_MISC) - hysdn_addlog(cnf->card, "cnf write denied -> not booted"); - return (-ERR_NOT_BOOTED); - } - i = (CONF_LINE_LEN - 1) - cnf->buf_size; /* bytes available in buffer */ - if (i > 0) { - /* copy remaining bytes into buffer */ - - if (count > i) - count = i; /* limit transfer */ - if (copy_from_user(cnf->conf_line + cnf->buf_size, buf, count)) - return (-EFAULT); /* error while copying */ - - i = count; /* number of chars in buffer */ - cp = cnf->conf_line + cnf->buf_size; - while (i) { - /* search for end of line */ - if ((*cp < ' ') && (*cp != 9)) - break; /* end of line found */ - cp++; - i--; - } /* search for end of line */ - - if (i) { - /* delimiter found */ - *cp++ = 0; /* string termination */ - count -= (i - 1); /* subtract remaining bytes from count */ - while ((i) && (*cp < ' ') && (*cp != 9)) { - i--; /* discard next char */ - count++; /* mark as read */ - cp++; /* next char */ - } - cnf->buf_size = 0; /* buffer is empty after transfer */ - if ((i = process_line(cnf)) < 0) /* handle the line */ - count = i; /* return the error */ - } - /* delimiter found */ - else { - cnf->buf_size += count; /* add chars to string */ - if (cnf->buf_size >= CONF_LINE_LEN - 1) { - if (cnf->card->debug_flags & LOG_CNF_MISC) - hysdn_addlog(cnf->card, "cnf line too long %d chars pos %d", cnf->buf_size, count); - return (-ERR_CONF_LONG); - } - } /* not delimited */ - - } - /* copy remaining bytes into buffer */ - else { - if (cnf->card->debug_flags & LOG_CNF_MISC) - hysdn_addlog(cnf->card, "cnf line too long"); - return (-ERR_CONF_LONG); - } - } /* conf write active */ - - return (count); -} /* hysdn_conf_write */ - -/*******************************************/ -/* read conf file -> output card info data */ -/*******************************************/ -static ssize_t -hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t *off) -{ - char *cp; - - if (!(file->f_mode & FMODE_READ)) - return -EPERM; /* no permission to read */ - - if (!(cp = file->private_data)) - return -EFAULT; /* should never happen */ - - return simple_read_from_buffer(buf, count, off, cp, strlen(cp)); -} /* hysdn_conf_read */ - -/******************/ -/* open conf file */ -/******************/ -static int -hysdn_conf_open(struct inode *ino, struct file *filep) -{ - hysdn_card *card; - struct conf_writedata *cnf; - char *cp, *tmp; - - /* now search the addressed card */ - mutex_lock(&hysdn_conf_mutex); - card = PDE_DATA(ino); - if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL)) - hysdn_addlog(card, "config open for uid=%d gid=%d mode=0x%x", - filep->f_cred->fsuid, filep->f_cred->fsgid, - filep->f_mode); - - if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) { - /* write only access -> write boot file or conf line */ - - if (!(cnf = kmalloc(sizeof(struct conf_writedata), GFP_KERNEL))) { - mutex_unlock(&hysdn_conf_mutex); - return (-EFAULT); - } - cnf->card = card; - cnf->buf_size = 0; /* nothing buffered */ - cnf->state = CONF_STATE_DETECT; /* start auto detect */ - filep->private_data = cnf; - - } else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) { - /* read access -> output card info data */ - - if (!(tmp = kmalloc(INFO_OUT_LEN * 2 + 2, GFP_KERNEL))) { - mutex_unlock(&hysdn_conf_mutex); - return (-EFAULT); /* out of memory */ - } - filep->private_data = tmp; /* start of string */ - - /* first output a headline */ - sprintf(tmp, "id bus slot type irq iobase dp-mem b-chans fax-chans state device"); - cp = tmp; /* start of string */ - while (*cp) - cp++; - while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN) - *cp++ = ' '; - *cp++ = '\n'; - - /* and now the data */ - sprintf(cp, "%d %3d %4d %4d %3d 0x%04x 0x%08lx %7d %9d %3d %s", - card->myid, - card->bus, - PCI_SLOT(card->devfn), - card->brdtype, - card->irq, - card->iobase, - card->membase, - card->bchans, - card->faxchans, - card->state, - hysdn_net_getname(card)); - while (*cp) - cp++; - while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN) - *cp++ = ' '; - *cp++ = '\n'; - *cp = 0; /* end of string */ - } else { /* simultaneous read/write access forbidden ! */ - mutex_unlock(&hysdn_conf_mutex); - return (-EPERM); /* no permission this time */ - } - mutex_unlock(&hysdn_conf_mutex); - return nonseekable_open(ino, filep); -} /* hysdn_conf_open */ - -/***************************/ -/* close a config file. */ -/***************************/ -static int -hysdn_conf_close(struct inode *ino, struct file *filep) -{ - hysdn_card *card; - struct conf_writedata *cnf; - int retval = 0; - - mutex_lock(&hysdn_conf_mutex); - card = PDE_DATA(ino); - if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL)) - hysdn_addlog(card, "config close for uid=%d gid=%d mode=0x%x", - filep->f_cred->fsuid, filep->f_cred->fsgid, - filep->f_mode); - - if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) { - /* write only access -> write boot file or conf line */ - if (filep->private_data) { - cnf = filep->private_data; - - if (cnf->state == CONF_STATE_POF) - retval = pof_write_close(cnf->card); /* close the pof write */ - kfree(filep->private_data); /* free allocated memory for buffer */ - - } /* handle write private data */ - } else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) { - /* read access -> output card info data */ - - kfree(filep->private_data); /* release memory */ - } - mutex_unlock(&hysdn_conf_mutex); - return (retval); -} /* hysdn_conf_close */ - -/******************************************************/ -/* table for conf filesystem functions defined above. */ -/******************************************************/ -static const struct file_operations conf_fops = -{ - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = hysdn_conf_read, - .write = hysdn_conf_write, - .open = hysdn_conf_open, - .release = hysdn_conf_close, -}; - -/*****************************/ -/* hysdn subdir in /proc/net */ -/*****************************/ -struct proc_dir_entry *hysdn_proc_entry = NULL; - -/*******************************************************************************/ -/* hysdn_procconf_init is called when the module is loaded and after the cards */ -/* have been detected. The needed proc dir and card config files are created. */ -/* The log init is called at last. */ -/*******************************************************************************/ -int -hysdn_procconf_init(void) -{ - hysdn_card *card; - unsigned char conf_name[20]; - - hysdn_proc_entry = proc_mkdir(PROC_SUBDIR_NAME, init_net.proc_net); - if (!hysdn_proc_entry) { - printk(KERN_ERR "HYSDN: unable to create hysdn subdir\n"); - return (-1); - } - card = card_root; /* point to first card */ - while (card) { - - sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid); - if ((card->procconf = (void *) proc_create_data(conf_name, - S_IFREG | S_IRUGO | S_IWUSR, - hysdn_proc_entry, - &conf_fops, - card)) != NULL) { - hysdn_proclog_init(card); /* init the log file entry */ - } - card = card->next; /* next entry */ - } - - printk(KERN_NOTICE "HYSDN: procfs initialised\n"); - return 0; -} /* hysdn_procconf_init */ - -/*************************************************************************************/ -/* hysdn_procconf_release is called when the module is unloaded and before the cards */ -/* resources are released. The module counter is assumed to be 0 ! */ -/*************************************************************************************/ -void -hysdn_procconf_release(void) -{ - hysdn_card *card; - unsigned char conf_name[20]; - - card = card_root; /* start with first card */ - while (card) { - - sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid); - if (card->procconf) - remove_proc_entry(conf_name, hysdn_proc_entry); - - hysdn_proclog_release(card); /* init the log file entry */ - - card = card->next; /* point to next card */ - } - - remove_proc_entry(PROC_SUBDIR_NAME, init_net.proc_net); -} diff --git a/drivers/staging/isdn/hysdn/hysdn_proclog.c b/drivers/staging/isdn/hysdn/hysdn_proclog.c deleted file mode 100644 index 6e898b90e86e..000000000000 --- a/drivers/staging/isdn/hysdn/hysdn_proclog.c +++ /dev/null @@ -1,357 +0,0 @@ -/* $Id: hysdn_proclog.c,v 1.9.6.3 2001/09/23 22:24:54 kai Exp $ - * - * Linux driver for HYSDN cards, /proc/net filesystem log functions. - * - * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH - * Copyright 1999 by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include <linux/module.h> -#include <linux/poll.h> -#include <linux/proc_fs.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <linux/kernel.h> - -#include "hysdn_defs.h" - -/* the proc subdir for the interface is defined in the procconf module */ -extern struct proc_dir_entry *hysdn_proc_entry; - -static DEFINE_MUTEX(hysdn_log_mutex); -static void put_log_buffer(hysdn_card *card, char *cp); - -/*************************************************/ -/* structure keeping ascii log for device output */ -/*************************************************/ -struct log_data { - struct log_data *next; - unsigned long usage_cnt;/* number of files still to work */ - void *proc_ctrl; /* pointer to own control procdata structure */ - char log_start[2]; /* log string start (final len aligned by size) */ -}; - -/**********************************************/ -/* structure holding proc entrys for one card */ -/**********************************************/ -struct procdata { - struct proc_dir_entry *log; /* log entry */ - char log_name[15]; /* log filename */ - struct log_data *log_head, *log_tail; /* head and tail for queue */ - int if_used; /* open count for interface */ - unsigned char logtmp[LOG_MAX_LINELEN]; - wait_queue_head_t rd_queue; -}; - - -/**********************************************/ -/* log function for cards error log interface */ -/**********************************************/ -void -hysdn_card_errlog(hysdn_card *card, tErrLogEntry *logp, int maxsize) -{ - char buf[ERRLOG_TEXT_SIZE + 40]; - - sprintf(buf, "LOG 0x%08lX 0x%08lX : %s\n", logp->ulErrType, logp->ulErrSubtype, logp->ucText); - put_log_buffer(card, buf); /* output the string */ -} /* hysdn_card_errlog */ - -/***************************************************/ -/* Log function using format specifiers for output */ -/***************************************************/ -void -hysdn_addlog(hysdn_card *card, char *fmt, ...) -{ - struct procdata *pd = card->proclog; - char *cp; - va_list args; - - if (!pd) - return; /* log structure non existent */ - - cp = pd->logtmp; - cp += sprintf(cp, "HYSDN: card %d ", card->myid); - - va_start(args, fmt); - cp += vsprintf(cp, fmt, args); - va_end(args); - *cp++ = '\n'; - *cp = 0; - - if (card->debug_flags & DEB_OUT_SYSLOG) - printk(KERN_INFO "%s", pd->logtmp); - else - put_log_buffer(card, pd->logtmp); - -} /* hysdn_addlog */ - -/********************************************/ -/* put an log buffer into the log queue. */ -/* This buffer will be kept until all files */ -/* opened for read got the contents. */ -/* Flushes buffers not longer in use. */ -/********************************************/ -static void -put_log_buffer(hysdn_card *card, char *cp) -{ - struct log_data *ib; - struct procdata *pd = card->proclog; - unsigned long flags; - - if (!pd) - return; - if (!cp) - return; - if (!*cp) - return; - if (pd->if_used <= 0) - return; /* no open file for read */ - - if (!(ib = kmalloc(sizeof(struct log_data) + strlen(cp), GFP_ATOMIC))) - return; /* no memory */ - strcpy(ib->log_start, cp); /* set output string */ - ib->next = NULL; - ib->proc_ctrl = pd; /* point to own control structure */ - spin_lock_irqsave(&card->hysdn_lock, flags); - ib->usage_cnt = pd->if_used; - if (!pd->log_head) - pd->log_head = ib; /* new head */ - else - pd->log_tail->next = ib; /* follows existing messages */ - pd->log_tail = ib; /* new tail */ - - /* delete old entrys */ - while (pd->log_head->next) { - if ((pd->log_head->usage_cnt <= 0) && - (pd->log_head->next->usage_cnt <= 0)) { - ib = pd->log_head; - pd->log_head = pd->log_head->next; - kfree(ib); - } else { - break; - } - } /* pd->log_head->next */ - - spin_unlock_irqrestore(&card->hysdn_lock, flags); - - wake_up_interruptible(&(pd->rd_queue)); /* announce new entry */ -} /* put_log_buffer */ - - -/******************************/ -/* file operations and tables */ -/******************************/ - -/****************************************/ -/* write log file -> set log level bits */ -/****************************************/ -static ssize_t -hysdn_log_write(struct file *file, const char __user *buf, size_t count, loff_t *off) -{ - int rc; - hysdn_card *card = file->private_data; - - rc = kstrtoul_from_user(buf, count, 0, &card->debug_flags); - if (rc < 0) - return rc; - hysdn_addlog(card, "debug set to 0x%lx", card->debug_flags); - return (count); -} /* hysdn_log_write */ - -/******************/ -/* read log file */ -/******************/ -static ssize_t -hysdn_log_read(struct file *file, char __user *buf, size_t count, loff_t *off) -{ - struct log_data *inf; - int len; - hysdn_card *card = PDE_DATA(file_inode(file)); - - if (!(inf = *((struct log_data **) file->private_data))) { - struct procdata *pd = card->proclog; - if (file->f_flags & O_NONBLOCK) - return (-EAGAIN); - - wait_event_interruptible(pd->rd_queue, (inf = - *((struct log_data **) file->private_data))); - } - if (!inf) - return (0); - - inf->usage_cnt--; /* new usage count */ - file->private_data = &inf->next; /* next structure */ - if ((len = strlen(inf->log_start)) <= count) { - if (copy_to_user(buf, inf->log_start, len)) - return -EFAULT; - *off += len; - return (len); - } - return (0); -} /* hysdn_log_read */ - -/******************/ -/* open log file */ -/******************/ -static int -hysdn_log_open(struct inode *ino, struct file *filep) -{ - hysdn_card *card = PDE_DATA(ino); - - mutex_lock(&hysdn_log_mutex); - if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) { - /* write only access -> write log level only */ - filep->private_data = card; /* remember our own card */ - } else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) { - struct procdata *pd = card->proclog; - unsigned long flags; - - /* read access -> log/debug read */ - spin_lock_irqsave(&card->hysdn_lock, flags); - pd->if_used++; - if (pd->log_head) - filep->private_data = &pd->log_tail->next; - else - filep->private_data = &pd->log_head; - spin_unlock_irqrestore(&card->hysdn_lock, flags); - } else { /* simultaneous read/write access forbidden ! */ - mutex_unlock(&hysdn_log_mutex); - return (-EPERM); /* no permission this time */ - } - mutex_unlock(&hysdn_log_mutex); - return nonseekable_open(ino, filep); -} /* hysdn_log_open */ - -/*******************************************************************************/ -/* close a cardlog file. If the file has been opened for exclusive write it is */ -/* assumed as pof data input and the pof loader is noticed about. */ -/* Otherwise file is handled as log output. In this case the interface usage */ -/* count is decremented and all buffers are noticed of closing. If this file */ -/* was the last one to be closed, all buffers are freed. */ -/*******************************************************************************/ -static int -hysdn_log_close(struct inode *ino, struct file *filep) -{ - struct log_data *inf; - struct procdata *pd; - hysdn_card *card; - int retval = 0; - - mutex_lock(&hysdn_log_mutex); - if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) { - /* write only access -> write debug level written */ - retval = 0; /* success */ - } else { - /* read access -> log/debug read, mark one further file as closed */ - - inf = *((struct log_data **) filep->private_data); /* get first log entry */ - if (inf) - pd = (struct procdata *) inf->proc_ctrl; /* still entries there */ - else { - /* no info available -> search card */ - card = PDE_DATA(file_inode(filep)); - pd = card->proclog; /* pointer to procfs log */ - } - if (pd) - pd->if_used--; /* decrement interface usage count by one */ - - while (inf) { - inf->usage_cnt--; /* decrement usage count for buffers */ - inf = inf->next; - } - - if (pd) - if (pd->if_used <= 0) /* delete buffers if last file closed */ - while (pd->log_head) { - inf = pd->log_head; - pd->log_head = pd->log_head->next; - kfree(inf); - } - } /* read access */ - mutex_unlock(&hysdn_log_mutex); - - return (retval); -} /* hysdn_log_close */ - -/*************************************************/ -/* select/poll routine to be able using select() */ -/*************************************************/ -static __poll_t -hysdn_log_poll(struct file *file, poll_table *wait) -{ - __poll_t mask = 0; - hysdn_card *card = PDE_DATA(file_inode(file)); - struct procdata *pd = card->proclog; - - if ((file->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) - return (mask); /* no polling for write supported */ - - poll_wait(file, &(pd->rd_queue), wait); - - if (*((struct log_data **) file->private_data)) - mask |= EPOLLIN | EPOLLRDNORM; - - return mask; -} /* hysdn_log_poll */ - -/**************************************************/ -/* table for log filesystem functions defined above. */ -/**************************************************/ -static const struct file_operations log_fops = -{ - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = hysdn_log_read, - .write = hysdn_log_write, - .poll = hysdn_log_poll, - .open = hysdn_log_open, - .release = hysdn_log_close, -}; - - -/***********************************************************************************/ -/* hysdn_proclog_init is called when the module is loaded after creating the cards */ -/* conf files. */ -/***********************************************************************************/ -int -hysdn_proclog_init(hysdn_card *card) -{ - struct procdata *pd; - - /* create a cardlog proc entry */ - - if ((pd = kzalloc(sizeof(struct procdata), GFP_KERNEL)) != NULL) { - sprintf(pd->log_name, "%s%d", PROC_LOG_BASENAME, card->myid); - pd->log = proc_create_data(pd->log_name, - S_IFREG | S_IRUGO | S_IWUSR, hysdn_proc_entry, - &log_fops, card); - - init_waitqueue_head(&(pd->rd_queue)); - - card->proclog = (void *) pd; /* remember procfs structure */ - } - return (0); -} /* hysdn_proclog_init */ - -/************************************************************************************/ -/* hysdn_proclog_release is called when the module is unloaded and before the cards */ -/* conf file is released */ -/* The module counter is assumed to be 0 ! */ -/************************************************************************************/ -void -hysdn_proclog_release(hysdn_card *card) -{ - struct procdata *pd; - - if ((pd = (struct procdata *) card->proclog) != NULL) { - if (pd->log) - remove_proc_entry(pd->log_name, hysdn_proc_entry); - kfree(pd); /* release memory */ - card->proclog = NULL; - } -} /* hysdn_proclog_release */ diff --git a/drivers/staging/isdn/hysdn/hysdn_sched.c b/drivers/staging/isdn/hysdn/hysdn_sched.c deleted file mode 100644 index 31d7c1415543..000000000000 --- a/drivers/staging/isdn/hysdn/hysdn_sched.c +++ /dev/null @@ -1,197 +0,0 @@ -/* $Id: hysdn_sched.c,v 1.5.6.4 2001/11/06 21:58:19 kai Exp $ - * - * Linux driver for HYSDN cards - * scheduler routines for handling exchange card <-> pc. - * - * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH - * Copyright 1999 by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include <linux/signal.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <asm/io.h> - -#include "hysdn_defs.h" - -/*****************************************************************************/ -/* hysdn_sched_rx is called from the cards handler to announce new data is */ -/* available from the card. The routine has to handle the data and return */ -/* with a nonzero code if the data could be worked (or even thrown away), if */ -/* no room to buffer the data is available a zero return tells the card */ -/* to keep the data until later. */ -/*****************************************************************************/ -int -hysdn_sched_rx(hysdn_card *card, unsigned char *buf, unsigned short len, - unsigned short chan) -{ - - switch (chan) { - case CHAN_NDIS_DATA: - if (hynet_enable & (1 << card->myid)) { - /* give packet to network handler */ - hysdn_rx_netpkt(card, buf, len); - } - break; - - case CHAN_ERRLOG: - hysdn_card_errlog(card, (tErrLogEntry *) buf, len); - if (card->err_log_state == ERRLOG_STATE_ON) - card->err_log_state = ERRLOG_STATE_START; /* start new fetch */ - break; -#ifdef CONFIG_HYSDN_CAPI - case CHAN_CAPI: -/* give packet to CAPI handler */ - if (hycapi_enable & (1 << card->myid)) { - hycapi_rx_capipkt(card, buf, len); - } - break; -#endif /* CONFIG_HYSDN_CAPI */ - default: - printk(KERN_INFO "irq message channel %d len %d unhandled \n", chan, len); - break; - - } /* switch rx channel */ - - return (1); /* always handled */ -} /* hysdn_sched_rx */ - -/*****************************************************************************/ -/* hysdn_sched_tx is called from the cards handler to announce that there is */ -/* room in the tx-buffer to the card and data may be sent if needed. */ -/* If the routine wants to send data it must fill buf, len and chan with the */ -/* appropriate data and return a nonzero value. With a zero return no new */ -/* data to send is assumed. maxlen specifies the buffer size available for */ -/* sending. */ -/*****************************************************************************/ -int -hysdn_sched_tx(hysdn_card *card, unsigned char *buf, - unsigned short volatile *len, unsigned short volatile *chan, - unsigned short maxlen) -{ - struct sk_buff *skb; - - if (card->net_tx_busy) { - card->net_tx_busy = 0; /* reset flag */ - hysdn_tx_netack(card); /* acknowledge packet send */ - } /* a network packet has completely been transferred */ - /* first of all async requests are handled */ - if (card->async_busy) { - if (card->async_len <= maxlen) { - memcpy(buf, card->async_data, card->async_len); - *len = card->async_len; - *chan = card->async_channel; - card->async_busy = 0; /* reset request */ - return (1); - } - card->async_busy = 0; /* in case of length error */ - } /* async request */ - if ((card->err_log_state == ERRLOG_STATE_START) && - (maxlen >= ERRLOG_CMD_REQ_SIZE)) { - strcpy(buf, ERRLOG_CMD_REQ); /* copy the command */ - *len = ERRLOG_CMD_REQ_SIZE; /* buffer length */ - *chan = CHAN_ERRLOG; /* and channel */ - card->err_log_state = ERRLOG_STATE_ON; /* new state is on */ - return (1); /* tell that data should be send */ - } /* error log start and able to send */ - if ((card->err_log_state == ERRLOG_STATE_STOP) && - (maxlen >= ERRLOG_CMD_STOP_SIZE)) { - strcpy(buf, ERRLOG_CMD_STOP); /* copy the command */ - *len = ERRLOG_CMD_STOP_SIZE; /* buffer length */ - *chan = CHAN_ERRLOG; /* and channel */ - card->err_log_state = ERRLOG_STATE_OFF; /* new state is off */ - return (1); /* tell that data should be send */ - } /* error log start and able to send */ - /* now handle network interface packets */ - if ((hynet_enable & (1 << card->myid)) && - (skb = hysdn_tx_netget(card)) != NULL) - { - if (skb->len <= maxlen) { - /* copy the packet to the buffer */ - skb_copy_from_linear_data(skb, buf, skb->len); - *len = skb->len; - *chan = CHAN_NDIS_DATA; - card->net_tx_busy = 1; /* we are busy sending network data */ - return (1); /* go and send the data */ - } else - hysdn_tx_netack(card); /* aknowledge packet -> throw away */ - } /* send a network packet if available */ -#ifdef CONFIG_HYSDN_CAPI - if (((hycapi_enable & (1 << card->myid))) && - ((skb = hycapi_tx_capiget(card)) != NULL)) - { - if (skb->len <= maxlen) { - skb_copy_from_linear_data(skb, buf, skb->len); - *len = skb->len; - *chan = CHAN_CAPI; - hycapi_tx_capiack(card); - return (1); /* go and send the data */ - } - } -#endif /* CONFIG_HYSDN_CAPI */ - return (0); /* nothing to send */ -} /* hysdn_sched_tx */ - - -/*****************************************************************************/ -/* send one config line to the card and return 0 if successful, otherwise a */ -/* negative error code. */ -/* The function works with timeouts perhaps not giving the greatest speed */ -/* sending the line, but this should be meaningless because only some lines */ -/* are to be sent and this happens very seldom. */ -/*****************************************************************************/ -int -hysdn_tx_cfgline(hysdn_card *card, unsigned char *line, unsigned short chan) -{ - int cnt = 50; /* timeout intervalls */ - unsigned long flags; - - if (card->debug_flags & LOG_SCHED_ASYN) - hysdn_addlog(card, "async tx-cfg chan=%d len=%d", chan, strlen(line) + 1); - - while (card->async_busy) { - - if (card->debug_flags & LOG_SCHED_ASYN) - hysdn_addlog(card, "async tx-cfg delayed"); - - msleep_interruptible(20); /* Timeout 20ms */ - if (!--cnt) - return (-ERR_ASYNC_TIME); /* timed out */ - } /* wait for buffer to become free */ - - spin_lock_irqsave(&card->hysdn_lock, flags); - strcpy(card->async_data, line); - card->async_len = strlen(line) + 1; - card->async_channel = chan; - card->async_busy = 1; /* request transfer */ - - /* now queue the task */ - schedule_work(&card->irq_queue); - spin_unlock_irqrestore(&card->hysdn_lock, flags); - - if (card->debug_flags & LOG_SCHED_ASYN) - hysdn_addlog(card, "async tx-cfg data queued"); - - cnt++; /* short delay */ - - while (card->async_busy) { - - if (card->debug_flags & LOG_SCHED_ASYN) - hysdn_addlog(card, "async tx-cfg waiting for tx-ready"); - - msleep_interruptible(20); /* Timeout 20ms */ - if (!--cnt) - return (-ERR_ASYNC_TIME); /* timed out */ - } /* wait for buffer to become free again */ - - if (card->debug_flags & LOG_SCHED_ASYN) - hysdn_addlog(card, "async tx-cfg data send"); - - return (0); /* line send correctly */ -} /* hysdn_tx_cfgline */ diff --git a/drivers/staging/isdn/hysdn/ince1pc.h b/drivers/staging/isdn/hysdn/ince1pc.h deleted file mode 100644 index cab68361de65..000000000000 --- a/drivers/staging/isdn/hysdn/ince1pc.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * Linux driver for HYSDN cards - * common definitions for both sides of the bus: - * - conventions both spoolers must know - * - channel numbers agreed upon - * - * Author M. Steinkopf - * Copyright 1999 by M. Steinkopf - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#ifndef __INCE1PC_H__ -#define __INCE1PC_H__ - -/* basic scalar definitions have same meanning, - * but their declaration location depends on environment - */ - -/*--------------------------------------channel numbers---------------------*/ -#define CHAN_SYSTEM 0x0001 /* system channel (spooler to spooler) */ -#define CHAN_ERRLOG 0x0005 /* error logger */ -#define CHAN_CAPI 0x0064 /* CAPI interface */ -#define CHAN_NDIS_DATA 0x1001 /* NDIS data transfer */ - -/*--------------------------------------POF ready msg-----------------------*/ -/* NOTE: after booting POF sends system ready message to PC: */ -#define RDY_MAGIC 0x52535953UL /* 'SYSR' reversed */ -#define RDY_MAGIC_SIZE 4 /* size in bytes */ - -#define MAX_N_TOK_BYTES 255 - -#define MIN_RDY_MSG_SIZE RDY_MAGIC_SIZE -#define MAX_RDY_MSG_SIZE (RDY_MAGIC_SIZE + MAX_N_TOK_BYTES) - -#define SYSR_TOK_END 0 -#define SYSR_TOK_B_CHAN 1 /* nr. of B-Channels; DataLen=1; def: 2 */ -#define SYSR_TOK_FAX_CHAN 2 /* nr. of FAX Channels; DataLen=1; def: 0 */ -#define SYSR_TOK_MAC_ADDR 3 /* MAC-Address; DataLen=6; def: auto */ -#define SYSR_TOK_ESC 255 /* undefined data size yet */ -/* default values, if not corrected by token: */ -#define SYSR_TOK_B_CHAN_DEF 2 /* assume 2 B-Channels */ -#define SYSR_TOK_FAX_CHAN_DEF 1 /* assume 1 FAX Channel */ - -/* syntax of new SYSR token stream: - * channel: CHAN_SYSTEM - * msgsize: MIN_RDY_MSG_SIZE <= x <= MAX_RDY_MSG_SIZE - * RDY_MAGIC_SIZE <= x <= (RDY_MAGIC_SIZE+MAX_N_TOK_BYTES) - * msg : 0 1 2 3 {4 5 6 ..} - * S Y S R MAX_N_TOK_BYTES bytes of TokenStream - * - * TokenStream := empty - * | {NonEndTokenChunk} EndToken RotlCRC - * NonEndTokenChunk:= NonEndTokenId DataLen [Data] - * NonEndTokenId := 0x01 .. 0xFE 1 BYTE - * DataLen := 0x00 .. 0xFF 1 BYTE - * Data := DataLen bytes - * EndToken := 0x00 - * RotlCRC := special 1 byte CRC over all NonEndTokenChunk bytes - * s. RotlCRC algorithm - * - * RotlCRC algorithm: - * ucSum= 0 1 unsigned char - * for all NonEndTokenChunk bytes: - * ROTL(ucSum,1) rotate left by 1 - * ucSum += Char; add current byte with swap around - * RotlCRC= ~ucSum; invert all bits for result - * - * note: - * - for 16-bit FIFO add padding 0 byte to achieve even token data bytes! - */ - -/*--------------------------------------error logger------------------------*/ -/* note: pof needs final 0 ! */ -#define ERRLOG_CMD_REQ "ERRLOG ON" -#define ERRLOG_CMD_REQ_SIZE 10 /* with final 0 byte ! */ -#define ERRLOG_CMD_STOP "ERRLOG OFF" -#define ERRLOG_CMD_STOP_SIZE 11 /* with final 0 byte ! */ - -#define ERRLOG_ENTRY_SIZE 64 /* sizeof(tErrLogEntry) */ - /* remaining text size = 55 */ -#define ERRLOG_TEXT_SIZE (ERRLOG_ENTRY_SIZE - 2 * 4 - 1) - -typedef struct ErrLogEntry_tag { - - /*00 */ unsigned long ulErrType; - - /*04 */ unsigned long ulErrSubtype; - - /*08 */ unsigned char ucTextSize; - - /*09 */ unsigned char ucText[ERRLOG_TEXT_SIZE]; - /* ASCIIZ of len ucTextSize-1 */ - -/*40 */ -} tErrLogEntry; - - -#if defined(__TURBOC__) -#if sizeof(tErrLogEntry) != ERRLOG_ENTRY_SIZE -#error size of tErrLogEntry != ERRLOG_ENTRY_SIZE -#endif /* */ -#endif /* */ - -/*--------------------------------------DPRAM boot spooler------------------*/ -/* this is the struture used between pc and - * hyperstone to exchange boot data - */ -#define DPRAM_SPOOLER_DATA_SIZE 0x20 -typedef struct DpramBootSpooler_tag { - - /*00 */ unsigned char Len; - - /*01 */ volatile unsigned char RdPtr; - - /*02 */ unsigned char WrPtr; - - /*03 */ unsigned char Data[DPRAM_SPOOLER_DATA_SIZE]; - -/*23 */ -} tDpramBootSpooler; - - -#define DPRAM_SPOOLER_MIN_SIZE 5 /* Len+RdPtr+Wrptr+2*data */ -#define DPRAM_SPOOLER_DEF_SIZE 0x23 /* current default size */ - -/*--------------------------------------HYCARD/ERGO DPRAM SoftUart----------*/ -/* at DPRAM offset 0x1C00: */ -#define SIZE_RSV_SOFT_UART 0x1B0 /* 432 bytes reserved for SoftUart */ - - -#endif /* __INCE1PC_H__ */ |