diff options
Diffstat (limited to 'drivers/staging/media/davinci_vpfe/dm365_isif.c')
-rw-r--r-- | drivers/staging/media/davinci_vpfe/dm365_isif.c | 2097 |
1 files changed, 0 insertions, 2097 deletions
diff --git a/drivers/staging/media/davinci_vpfe/dm365_isif.c b/drivers/staging/media/davinci_vpfe/dm365_isif.c deleted file mode 100644 index 05a997f7aa5d..000000000000 --- a/drivers/staging/media/davinci_vpfe/dm365_isif.c +++ /dev/null @@ -1,2097 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2012 Texas Instruments Inc - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Contributors: - * Manjunath Hadli <manjunath.hadli@ti.com> - * Prabhakar Lad <prabhakar.lad@ti.com> - */ - -#include <linux/delay.h> -#include "dm365_isif.h" -#include "vpfe_mc_capture.h" - -#define MAX_WIDTH 4096 -#define MAX_HEIGHT 4096 - -static const unsigned int isif_fmts[] = { - MEDIA_BUS_FMT_YUYV8_2X8, - MEDIA_BUS_FMT_UYVY8_2X8, - MEDIA_BUS_FMT_YUYV8_1X16, - MEDIA_BUS_FMT_YUYV10_1X20, - MEDIA_BUS_FMT_SGRBG12_1X12, - MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8, - MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8, -}; - -#define ISIF_COLPTN_R_Ye 0x0 -#define ISIF_COLPTN_Gr_Cy 0x1 -#define ISIF_COLPTN_Gb_G 0x2 -#define ISIF_COLPTN_B_Mg 0x3 - -#define ISIF_CCOLP_CP01_0 0 -#define ISIF_CCOLP_CP03_2 2 -#define ISIF_CCOLP_CP05_4 4 -#define ISIF_CCOLP_CP07_6 6 -#define ISIF_CCOLP_CP11_0 8 -#define ISIF_CCOLP_CP13_2 10 -#define ISIF_CCOLP_CP15_4 12 -#define ISIF_CCOLP_CP17_6 14 - -static const u32 isif_sgrbg_pattern = - ISIF_COLPTN_Gr_Cy << ISIF_CCOLP_CP01_0 | - ISIF_COLPTN_R_Ye << ISIF_CCOLP_CP03_2 | - ISIF_COLPTN_B_Mg << ISIF_CCOLP_CP05_4 | - ISIF_COLPTN_Gb_G << ISIF_CCOLP_CP07_6 | - ISIF_COLPTN_Gr_Cy << ISIF_CCOLP_CP11_0 | - ISIF_COLPTN_R_Ye << ISIF_CCOLP_CP13_2 | - ISIF_COLPTN_B_Mg << ISIF_CCOLP_CP15_4 | - ISIF_COLPTN_Gb_G << ISIF_CCOLP_CP17_6; - -static const u32 isif_srggb_pattern = - ISIF_COLPTN_R_Ye << ISIF_CCOLP_CP01_0 | - ISIF_COLPTN_Gr_Cy << ISIF_CCOLP_CP03_2 | - ISIF_COLPTN_Gb_G << ISIF_CCOLP_CP05_4 | - ISIF_COLPTN_B_Mg << ISIF_CCOLP_CP07_6 | - ISIF_COLPTN_R_Ye << ISIF_CCOLP_CP11_0 | - ISIF_COLPTN_Gr_Cy << ISIF_CCOLP_CP13_2 | - ISIF_COLPTN_Gb_G << ISIF_CCOLP_CP15_4 | - ISIF_COLPTN_B_Mg << ISIF_CCOLP_CP17_6; - -static inline u32 isif_read(void __iomem *base_addr, u32 offset) -{ - return readl(base_addr + offset); -} - -static inline void isif_write(void __iomem *base_addr, u32 val, u32 offset) -{ - writel(val, base_addr + offset); -} - -static inline u32 isif_merge(void __iomem *base_addr, u32 mask, u32 val, - u32 offset) -{ - u32 new_val = (isif_read(base_addr, offset) & ~mask) | (val & mask); - - isif_write(base_addr, new_val, offset); - - return new_val; -} - -static void isif_enable_output_to_sdram(struct vpfe_isif_device *isif, int en) -{ - isif_merge(isif->isif_cfg.base_addr, ISIF_SYNCEN_WEN_MASK, - en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN); -} - -static inline void -isif_regw_lin_tbl(struct vpfe_isif_device *isif, u32 val, u32 offset, int i) -{ - if (!i) - writel(val, isif->isif_cfg.linear_tbl0_addr + offset); - else - writel(val, isif->isif_cfg.linear_tbl1_addr + offset); -} - -static void isif_disable_all_modules(struct vpfe_isif_device *isif) -{ - /* disable BC */ - isif_write(isif->isif_cfg.base_addr, 0, CLAMPCFG); - /* disable vdfc */ - isif_write(isif->isif_cfg.base_addr, 0, DFCCTL); - /* disable CSC */ - isif_write(isif->isif_cfg.base_addr, 0, CSCCTL); - /* disable linearization */ - isif_write(isif->isif_cfg.base_addr, 0, LINCFG0); -} - -static void isif_enable(struct vpfe_isif_device *isif, int en) -{ - if (!en) - /* Before disable isif, disable all ISIF modules */ - isif_disable_all_modules(isif); - - /* - * wait for next VD. Assume lowest scan rate is 12 Hz. So - * 100 msec delay is good enough - */ - msleep(100); - isif_merge(isif->isif_cfg.base_addr, ISIF_SYNCEN_VDHDEN_MASK, - en, SYNCEN); -} - -/* - * ISIF helper functions - */ - -#define DM365_ISIF_MDFS_OFFSET 15 -#define DM365_ISIF_MDFS_MASK 0x1 - -/* get field id in isif hardware */ -enum v4l2_field vpfe_isif_get_fid(struct vpfe_device *vpfe_dev) -{ - struct vpfe_isif_device *isif = &vpfe_dev->vpfe_isif; - u32 field_status; - - field_status = isif_read(isif->isif_cfg.base_addr, MODESET); - return (field_status >> DM365_ISIF_MDFS_OFFSET) & - DM365_ISIF_MDFS_MASK; -} - -static int -isif_set_pixel_format(struct vpfe_isif_device *isif, unsigned int pixfmt) -{ - if (isif->formats[ISIF_PAD_SINK].code == MEDIA_BUS_FMT_SGRBG12_1X12) { - if (pixfmt == V4L2_PIX_FMT_SBGGR16) - isif->isif_cfg.data_pack = ISIF_PACK_16BIT; - else if ((pixfmt == V4L2_PIX_FMT_SGRBG10DPCM8) || - (pixfmt == V4L2_PIX_FMT_SGRBG10ALAW8)) - isif->isif_cfg.data_pack = ISIF_PACK_8BIT; - else - return -EINVAL; - - isif->isif_cfg.bayer.pix_fmt = ISIF_PIXFMT_RAW; - isif->isif_cfg.bayer.v4l2_pix_fmt = pixfmt; - } else { - if (pixfmt == V4L2_PIX_FMT_YUYV) - isif->isif_cfg.ycbcr.pix_order = ISIF_PIXORDER_YCBYCR; - else if (pixfmt == V4L2_PIX_FMT_UYVY) - isif->isif_cfg.ycbcr.pix_order = ISIF_PIXORDER_CBYCRY; - else - return -EINVAL; - - isif->isif_cfg.data_pack = ISIF_PACK_8BIT; - isif->isif_cfg.ycbcr.v4l2_pix_fmt = pixfmt; - } - - return 0; -} - -static int -isif_set_frame_format(struct vpfe_isif_device *isif, - enum isif_frmfmt frm_fmt) -{ - if (isif->formats[ISIF_PAD_SINK].code == MEDIA_BUS_FMT_SGRBG12_1X12) - isif->isif_cfg.bayer.frm_fmt = frm_fmt; - else - isif->isif_cfg.ycbcr.frm_fmt = frm_fmt; - - return 0; -} - -static int isif_set_image_window(struct vpfe_isif_device *isif) -{ - struct v4l2_rect *win = &isif->crop; - - if (isif->formats[ISIF_PAD_SINK].code == MEDIA_BUS_FMT_SGRBG12_1X12) { - isif->isif_cfg.bayer.win.top = win->top; - isif->isif_cfg.bayer.win.left = win->left; - isif->isif_cfg.bayer.win.width = win->width; - isif->isif_cfg.bayer.win.height = win->height; - return 0; - } - isif->isif_cfg.ycbcr.win.top = win->top; - isif->isif_cfg.ycbcr.win.left = win->left; - isif->isif_cfg.ycbcr.win.width = win->width; - isif->isif_cfg.ycbcr.win.height = win->height; - - return 0; -} - -static int -isif_set_buftype(struct vpfe_isif_device *isif, enum isif_buftype buf_type) -{ - if (isif->formats[ISIF_PAD_SINK].code == MEDIA_BUS_FMT_SGRBG12_1X12) - isif->isif_cfg.bayer.buf_type = buf_type; - else - isif->isif_cfg.ycbcr.buf_type = buf_type; - - return 0; -} - -/* configure format in isif hardware */ -static int -isif_config_format(struct vpfe_device *vpfe_dev, unsigned int pad) -{ - struct vpfe_isif_device *vpfe_isif = &vpfe_dev->vpfe_isif; - enum isif_frmfmt frm_fmt = ISIF_FRMFMT_INTERLACED; - struct v4l2_pix_format format; - int ret = 0; - - v4l2_fill_pix_format(&format, &vpfe_dev->vpfe_isif.formats[pad]); - mbus_to_pix(&vpfe_dev->vpfe_isif.formats[pad], &format); - - if (isif_set_pixel_format(vpfe_isif, format.pixelformat) < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, - "Failed to set pixel format in isif\n"); - return -EINVAL; - } - - /* call for s_crop will override these values */ - vpfe_isif->crop.left = 0; - vpfe_isif->crop.top = 0; - vpfe_isif->crop.width = format.width; - vpfe_isif->crop.height = format.height; - - /* configure the image window */ - isif_set_image_window(vpfe_isif); - - switch (vpfe_dev->vpfe_isif.formats[pad].field) { - case V4L2_FIELD_INTERLACED: - /* do nothing, since it is default */ - ret = isif_set_buftype(vpfe_isif, ISIF_BUFTYPE_FLD_INTERLEAVED); - break; - - case V4L2_FIELD_NONE: - frm_fmt = ISIF_FRMFMT_PROGRESSIVE; - /* buffer type only applicable for interlaced scan */ - break; - - case V4L2_FIELD_SEQ_TB: - ret = isif_set_buftype(vpfe_isif, ISIF_BUFTYPE_FLD_SEPARATED); - break; - - default: - return -EINVAL; - } - - /* set the frame format */ - if (!ret) - ret = isif_set_frame_format(vpfe_isif, frm_fmt); - - return ret; -} - -/* - * isif_try_format() - Try video format on a pad - * @isif: VPFE isif device - * @cfg: V4L2 subdev pad config - * @fmt: pointer to v4l2 subdev format structure - */ -static void -isif_try_format(struct vpfe_isif_device *isif, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_format *fmt) -{ - unsigned int width = fmt->format.width; - unsigned int height = fmt->format.height; - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(isif_fmts); i++) { - if (fmt->format.code == isif_fmts[i]) - break; - } - - /* If not found, use YUYV8_2x8 as default */ - if (i >= ARRAY_SIZE(isif_fmts)) - fmt->format.code = MEDIA_BUS_FMT_YUYV8_2X8; - - /* Clamp the size. */ - fmt->format.width = clamp_t(u32, width, 32, MAX_WIDTH); - fmt->format.height = clamp_t(u32, height, 32, MAX_HEIGHT); - - /* The data formatter truncates the number of horizontal output - * pixels to a multiple of 16. To avoid clipping data, allow - * callers to request an output size bigger than the input size - * up to the nearest multiple of 16. - */ - if (fmt->pad == ISIF_PAD_SOURCE) - fmt->format.width &= ~15; -} - -/* - * vpfe_isif_buffer_isr() - isif module non-progressive buffer scheduling isr - * @isif: Pointer to isif subdevice. - */ -void vpfe_isif_buffer_isr(struct vpfe_isif_device *isif) -{ - struct vpfe_device *vpfe_dev = to_vpfe_device(isif); - struct vpfe_video_device *video = &isif->video_out; - enum v4l2_field field; - int fid; - - if (!video->started) - return; - - field = video->fmt.fmt.pix.field; - - if (field == V4L2_FIELD_NONE) { - /* handle progressive frame capture */ - if (video->cur_frm != video->next_frm) - vpfe_video_process_buffer_complete(video); - return; - } - - /* interlaced or TB capture check which field we - * are in hardware - */ - fid = vpfe_isif_get_fid(vpfe_dev); - - /* switch the software maintained field id */ - video->field_id ^= 1; - if (fid == video->field_id) { - /* we are in-sync here,continue */ - if (fid == 0) { - /* - * One frame is just being captured. If the - * next frame is available, release the current - * frame and move on - */ - if (video->cur_frm != video->next_frm) - vpfe_video_process_buffer_complete(video); - /* - * based on whether the two fields are stored - * interleavely or separately in memory, - * reconfigure the ISIF memory address - */ - if (field == V4L2_FIELD_SEQ_TB) - vpfe_video_schedule_bottom_field(video); - return; - } - /* - * if one field is just being captured configure - * the next frame get the next frame from the - * empty queue if no frame is available hold on - * to the current buffer - */ - spin_lock(&video->dma_queue_lock); - if (!list_empty(&video->dma_queue) && - video->cur_frm == video->next_frm) - vpfe_video_schedule_next_buffer(video); - spin_unlock(&video->dma_queue_lock); - } else if (fid == 0) { - /* - * out of sync. Recover from any hardware out-of-sync. - * May loose one frame - */ - video->field_id = fid; - } -} - -/* - * vpfe_isif_vidint1_isr() - ISIF module progressive buffer scheduling isr - * @isif: Pointer to isif subdevice. - */ -void vpfe_isif_vidint1_isr(struct vpfe_isif_device *isif) -{ - struct vpfe_video_device *video = &isif->video_out; - - if (!video->started) - return; - - spin_lock(&video->dma_queue_lock); - if (video->fmt.fmt.pix.field == V4L2_FIELD_NONE && - !list_empty(&video->dma_queue) && video->cur_frm == video->next_frm) - vpfe_video_schedule_next_buffer(video); - - spin_unlock(&video->dma_queue_lock); -} - -/* - * VPFE video operations - */ - -static int isif_video_queue(struct vpfe_device *vpfe_dev, unsigned long addr) -{ - struct vpfe_isif_device *isif = &vpfe_dev->vpfe_isif; - - isif_write(isif->isif_cfg.base_addr, (addr >> 21) & - ISIF_CADU_BITS, CADU); - isif_write(isif->isif_cfg.base_addr, (addr >> 5) & - ISIF_CADL_BITS, CADL); - - return 0; -} - -static const struct vpfe_video_operations isif_video_ops = { - .queue = isif_video_queue, -}; - -/* - * V4L2 subdev operations - */ - -/* Parameter operations */ -static int isif_get_params(struct v4l2_subdev *sd, void *params) -{ - struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd); - - /* only raw module parameters can be set through the IOCTL */ - if (isif->formats[ISIF_PAD_SINK].code != MEDIA_BUS_FMT_SGRBG12_1X12) - return -EINVAL; - memcpy(params, &isif->isif_cfg.bayer.config_params, - sizeof(isif->isif_cfg.bayer.config_params)); - return 0; -} - -static int isif_validate_df_csc_params(const struct vpfe_isif_df_csc *df_csc) -{ - const struct vpfe_isif_color_space_conv *csc; - int err = -EINVAL; - int i; - - if (!df_csc->df_or_csc) { - /* csc configuration */ - csc = &df_csc->csc; - if (csc->en) { - for (i = 0; i < VPFE_ISIF_CSC_NUM_COEFF; i++) - if (csc->coeff[i].integer > - ISIF_CSC_COEF_INTEG_MASK || - csc->coeff[i].decimal > - ISIF_CSC_COEF_DECIMAL_MASK) { - pr_err("Invalid CSC coefficients\n"); - return err; - } - } - } - if (df_csc->start_pix > ISIF_DF_CSC_SPH_MASK) { - pr_err("Invalid df_csc start pix value\n"); - return err; - } - - if (df_csc->num_pixels > ISIF_DF_NUMPIX) { - pr_err("Invalid df_csc num pixels value\n"); - return err; - } - - if (df_csc->start_line > ISIF_DF_CSC_LNH_MASK) { - pr_err("Invalid df_csc start_line value\n"); - return err; - } - - if (df_csc->num_lines > ISIF_DF_NUMLINES) { - pr_err("Invalid df_csc num_lines value\n"); - return err; - } - - return 0; -} - -#define DM365_ISIF_MAX_VDFLSFT 4 -#define DM365_ISIF_MAX_VDFSLV 4095 -#define DM365_ISIF_MAX_DFCMEM0 0x1fff -#define DM365_ISIF_MAX_DFCMEM1 0x1fff - -static int isif_validate_dfc_params(const struct vpfe_isif_dfc *dfc) -{ - int err = -EINVAL; - int i; - - if (!dfc->en) - return 0; - - if (dfc->corr_whole_line > 1) { - pr_err("Invalid corr_whole_line value\n"); - return err; - } - - if (dfc->def_level_shift > DM365_ISIF_MAX_VDFLSFT) { - pr_err("Invalid def_level_shift value\n"); - return err; - } - - if (dfc->def_sat_level > DM365_ISIF_MAX_VDFSLV) { - pr_err("Invalid def_sat_level value\n"); - return err; - } - - if (!dfc->num_vdefects || - dfc->num_vdefects > VPFE_ISIF_VDFC_TABLE_SIZE) { - pr_err("Invalid num_vdefects value\n"); - return err; - } - - for (i = 0; i < VPFE_ISIF_VDFC_TABLE_SIZE; i++) { - if (dfc->table[i].pos_vert > DM365_ISIF_MAX_DFCMEM0) { - pr_err("Invalid pos_vert value\n"); - return err; - } - if (dfc->table[i].pos_horz > DM365_ISIF_MAX_DFCMEM1) { - pr_err("Invalid pos_horz value\n"); - return err; - } - } - - return 0; -} - -#define DM365_ISIF_MAX_CLVRV 0xfff -#define DM365_ISIF_MAX_CLDC 0x1fff -#define DM365_ISIF_MAX_CLHSH 0x1fff -#define DM365_ISIF_MAX_CLHSV 0x1fff -#define DM365_ISIF_MAX_CLVSH 0x1fff -#define DM365_ISIF_MAX_CLVSV 0x1fff -#define DM365_ISIF_MAX_HEIGHT_BLACK_REGION 0x1fff - -static int isif_validate_bclamp_params(const struct vpfe_isif_black_clamp *bclamp) -{ - int err = -EINVAL; - - if (bclamp->dc_offset > DM365_ISIF_MAX_CLDC) { - pr_err("Invalid bclamp dc_offset value\n"); - return err; - } - if (!bclamp->en) - return 0; - if (bclamp->horz.clamp_pix_limit > 1) { - pr_err("Invalid bclamp horz clamp_pix_limit value\n"); - return err; - } - if (bclamp->horz.win_count_calc < 1 || - bclamp->horz.win_count_calc > 32) { - pr_err("Invalid bclamp horz win_count_calc value\n"); - return err; - } - if (bclamp->horz.win_start_h_calc > DM365_ISIF_MAX_CLHSH) { - pr_err("Invalid bclamp win_start_v_calc value\n"); - return err; - } - - if (bclamp->horz.win_start_v_calc > DM365_ISIF_MAX_CLHSV) { - pr_err("Invalid bclamp win_start_v_calc value\n"); - return err; - } - if (bclamp->vert.reset_clamp_val > DM365_ISIF_MAX_CLVRV) { - pr_err("Invalid bclamp reset_clamp_val value\n"); - return err; - } - if (bclamp->vert.ob_v_sz_calc > DM365_ISIF_MAX_HEIGHT_BLACK_REGION) { - pr_err("Invalid bclamp ob_v_sz_calc value\n"); - return err; - } - if (bclamp->vert.ob_start_h > DM365_ISIF_MAX_CLVSH) { - pr_err("Invalid bclamp ob_start_h value\n"); - return err; - } - if (bclamp->vert.ob_start_v > DM365_ISIF_MAX_CLVSV) { - pr_err("Invalid bclamp ob_start_h value\n"); - return err; - } - return 0; -} - -static int -isif_validate_raw_params(const struct vpfe_isif_raw_config *params) -{ - int ret; - - ret = isif_validate_df_csc_params(¶ms->df_csc); - if (ret) - return ret; - ret = isif_validate_dfc_params(¶ms->dfc); - if (ret) - return ret; - return isif_validate_bclamp_params(¶ms->bclamp); -} - -static int isif_set_params(struct v4l2_subdev *sd, const struct vpfe_isif_raw_config *params) -{ - struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd); - int ret = -EINVAL; - - /* only raw module parameters can be set through the IOCTL */ - if (isif->formats[ISIF_PAD_SINK].code != MEDIA_BUS_FMT_SGRBG12_1X12) - return ret; - - if (!isif_validate_raw_params(params)) { - memcpy(&isif->isif_cfg.bayer.config_params, params, - sizeof(*params)); - ret = 0; - } - return ret; -} -/* - * isif_ioctl() - isif module private ioctl's - * @sd: VPFE isif V4L2 subdevice - * @cmd: ioctl command - * @arg: ioctl argument - * - * Return 0 on success or a negative error code otherwise. - */ -static long isif_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) -{ - switch (cmd) { - case VIDIOC_VPFE_ISIF_S_RAW_PARAMS: - return isif_set_params(sd, arg); - - case VIDIOC_VPFE_ISIF_G_RAW_PARAMS: - return isif_get_params(sd, arg); - - default: - return -ENOIOCTLCMD; - } -} - -static void isif_config_gain_offset(struct vpfe_isif_device *isif) -{ - struct vpfe_isif_gain_offsets_adj *gain_off_ptr = - &isif->isif_cfg.bayer.config_params.gain_offset; - void __iomem *base = isif->isif_cfg.base_addr; - u32 val; - - val = ((gain_off_ptr->gain_sdram_en & 1) << GAIN_SDRAM_EN_SHIFT) | - ((gain_off_ptr->gain_ipipe_en & 1) << GAIN_IPIPE_EN_SHIFT) | - ((gain_off_ptr->gain_h3a_en & 1) << GAIN_H3A_EN_SHIFT) | - ((gain_off_ptr->offset_sdram_en & 1) << OFST_SDRAM_EN_SHIFT) | - ((gain_off_ptr->offset_ipipe_en & 1) << OFST_IPIPE_EN_SHIFT) | - ((gain_off_ptr->offset_h3a_en & 1) << OFST_H3A_EN_SHIFT); - isif_merge(base, GAIN_OFFSET_EN_MASK, val, CGAMMAWD); - - isif_write(base, isif->isif_cfg.isif_gain_params.cr_gain, CRGAIN); - isif_write(base, isif->isif_cfg.isif_gain_params.cgr_gain, CGRGAIN); - isif_write(base, isif->isif_cfg.isif_gain_params.cgb_gain, CGBGAIN); - isif_write(base, isif->isif_cfg.isif_gain_params.cb_gain, CBGAIN); - isif_write(base, isif->isif_cfg.isif_gain_params.offset & OFFSET_MASK, - COFSTA); - -} - -static void isif_config_bclamp(struct vpfe_isif_device *isif, - struct vpfe_isif_black_clamp *bc) -{ - u32 val; - - /** - * DC Offset is always added to image data irrespective of bc enable - * status - */ - val = bc->dc_offset & ISIF_BC_DCOFFSET_MASK; - isif_write(isif->isif_cfg.base_addr, val, CLDCOFST); - - if (!bc->en) - return; - - val = (bc->bc_mode_color & ISIF_BC_MODE_COLOR_MASK) << - ISIF_BC_MODE_COLOR_SHIFT; - - /* Enable BC and horizontal clamp calculation parameters */ - val = val | 1 | ((bc->horz.mode & ISIF_HORZ_BC_MODE_MASK) << - ISIF_HORZ_BC_MODE_SHIFT); - - isif_write(isif->isif_cfg.base_addr, val, CLAMPCFG); - - if (bc->horz.mode != VPFE_ISIF_HORZ_BC_DISABLE) { - /* - * Window count for calculation - * Base window selection - * pixel limit - * Horizontal size of window - * vertical size of the window - * Horizontal start position of the window - * Vertical start position of the window - */ - val = (bc->horz.win_count_calc & ISIF_HORZ_BC_WIN_COUNT_MASK) | - ((bc->horz.base_win_sel_calc & 1) << - ISIF_HORZ_BC_WIN_SEL_SHIFT) | - ((bc->horz.clamp_pix_limit & 1) << - ISIF_HORZ_BC_PIX_LIMIT_SHIFT) | - ((bc->horz.win_h_sz_calc & - ISIF_HORZ_BC_WIN_H_SIZE_MASK) << - ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) | - ((bc->horz.win_v_sz_calc & - ISIF_HORZ_BC_WIN_V_SIZE_MASK) << - ISIF_HORZ_BC_WIN_V_SIZE_SHIFT); - - isif_write(isif->isif_cfg.base_addr, val, CLHWIN0); - - val = bc->horz.win_start_h_calc & ISIF_HORZ_BC_WIN_START_H_MASK; - isif_write(isif->isif_cfg.base_addr, val, CLHWIN1); - - val = bc->horz.win_start_v_calc & ISIF_HORZ_BC_WIN_START_V_MASK; - isif_write(isif->isif_cfg.base_addr, val, CLHWIN2); - } - - /* vertical clamp calculation parameters */ - /* OB H Valid */ - val = bc->vert.ob_h_sz_calc & ISIF_VERT_BC_OB_H_SZ_MASK; - - /* Reset clamp value sel for previous line */ - val |= (bc->vert.reset_val_sel & ISIF_VERT_BC_RST_VAL_SEL_MASK) << - ISIF_VERT_BC_RST_VAL_SEL_SHIFT; - - /* Line average coefficient */ - val |= bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT; - isif_write(isif->isif_cfg.base_addr, val, CLVWIN0); - - /* Configured reset value */ - if (bc->vert.reset_val_sel == VPFE_ISIF_VERT_BC_USE_CONFIG_CLAMP_VAL) { - val = bc->vert.reset_clamp_val & ISIF_VERT_BC_RST_VAL_MASK; - isif_write(isif->isif_cfg.base_addr, val, CLVRV); - } - - /* Optical Black horizontal start position */ - val = bc->vert.ob_start_h & ISIF_VERT_BC_OB_START_HORZ_MASK; - isif_write(isif->isif_cfg.base_addr, val, CLVWIN1); - - /* Optical Black vertical start position */ - val = bc->vert.ob_start_v & ISIF_VERT_BC_OB_START_VERT_MASK; - isif_write(isif->isif_cfg.base_addr, val, CLVWIN2); - - val = bc->vert.ob_v_sz_calc & ISIF_VERT_BC_OB_VERT_SZ_MASK; - isif_write(isif->isif_cfg.base_addr, val, CLVWIN3); - - /* Vertical start position for BC subtraction */ - val = bc->vert_start_sub & ISIF_BC_VERT_START_SUB_V_MASK; - isif_write(isif->isif_cfg.base_addr, val, CLSV); -} - -/* This function will configure the window size to be capture in ISIF reg */ -static void -isif_setwin(struct vpfe_isif_device *isif, struct v4l2_rect *image_win, - enum isif_frmfmt frm_fmt, int ppc, int mode) -{ - int horz_nr_pixels; - int vert_nr_lines; - int horz_start; - int vert_start; - int mid_img; - - /* - * ppc - per pixel count. indicates how many pixels per cell - * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. - * raw capture this is 1 - */ - horz_start = image_win->left << (ppc - 1); - horz_nr_pixels = (image_win->width << (ppc - 1)) - 1; - - /* Writing the horizontal info into the registers */ - isif_write(isif->isif_cfg.base_addr, - horz_start & START_PX_HOR_MASK, SPH); - isif_write(isif->isif_cfg.base_addr, - horz_nr_pixels & NUM_PX_HOR_MASK, LNH); - vert_start = image_win->top; - - if (frm_fmt == ISIF_FRMFMT_INTERLACED) { - vert_nr_lines = (image_win->height >> 1) - 1; - vert_start >>= 1; - /* To account for VD since line 0 doesn't have any data */ - vert_start += 1; - } else { - /* To account for VD since line 0 doesn't have any data */ - vert_start += 1; - vert_nr_lines = image_win->height - 1; - /* configure VDINT0 and VDINT1 */ - mid_img = vert_start + (image_win->height / 2); - isif_write(isif->isif_cfg.base_addr, mid_img, VDINT1); - } - - if (!mode) - isif_write(isif->isif_cfg.base_addr, 0, VDINT0); - else - isif_write(isif->isif_cfg.base_addr, vert_nr_lines, VDINT0); - isif_write(isif->isif_cfg.base_addr, - vert_start & START_VER_ONE_MASK, SLV0); - isif_write(isif->isif_cfg.base_addr, - vert_start & START_VER_TWO_MASK, SLV1); - isif_write(isif->isif_cfg.base_addr, - vert_nr_lines & NUM_LINES_VER, LNV); -} - -#define DM365_ISIF_DFCMWR_MEMORY_WRITE 1 -#define DM365_ISIF_DFCMRD_MEMORY_READ 0x2 - -static void -isif_config_dfc(struct vpfe_isif_device *isif, struct vpfe_isif_dfc *vdfc) -{ -#define DFC_WRITE_WAIT_COUNT 1000 - u32 count = DFC_WRITE_WAIT_COUNT; - u32 val; - int i; - - if (!vdfc->en) - return; - - /* Correction mode */ - val = (vdfc->corr_mode & ISIF_VDFC_CORR_MOD_MASK) << - ISIF_VDFC_CORR_MOD_SHIFT; - - /* Correct whole line or partial */ - if (vdfc->corr_whole_line) - val |= BIT(ISIF_VDFC_CORR_WHOLE_LN_SHIFT); - - /* level shift value */ - val |= (vdfc->def_level_shift & ISIF_VDFC_LEVEL_SHFT_MASK) << - ISIF_VDFC_LEVEL_SHFT_SHIFT; - - isif_write(isif->isif_cfg.base_addr, val, DFCCTL); - - /* Defect saturation level */ - val = vdfc->def_sat_level & ISIF_VDFC_SAT_LEVEL_MASK; - isif_write(isif->isif_cfg.base_addr, val, VDFSATLV); - - isif_write(isif->isif_cfg.base_addr, vdfc->table[0].pos_vert & - ISIF_VDFC_POS_MASK, DFCMEM0); - isif_write(isif->isif_cfg.base_addr, vdfc->table[0].pos_horz & - ISIF_VDFC_POS_MASK, DFCMEM1); - if (vdfc->corr_mode == VPFE_ISIF_VDFC_NORMAL || - vdfc->corr_mode == VPFE_ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { - isif_write(isif->isif_cfg.base_addr, - vdfc->table[0].level_at_pos, DFCMEM2); - isif_write(isif->isif_cfg.base_addr, - vdfc->table[0].level_up_pixels, DFCMEM3); - isif_write(isif->isif_cfg.base_addr, - vdfc->table[0].level_low_pixels, DFCMEM4); - } - - val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL); - /* set DFCMARST and set DFCMWR */ - val |= BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT); - val |= 1; - isif_write(isif->isif_cfg.base_addr, val, DFCMEMCTL); - - while (count && (isif_read(isif->isif_cfg.base_addr, DFCMEMCTL) & 0x01)) - count--; - - val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL); - if (!count) { - pr_debug("defect table write timeout !!\n"); - return; - } - - for (i = 1; i < vdfc->num_vdefects; i++) { - isif_write(isif->isif_cfg.base_addr, vdfc->table[i].pos_vert & - ISIF_VDFC_POS_MASK, DFCMEM0); - - isif_write(isif->isif_cfg.base_addr, vdfc->table[i].pos_horz & - ISIF_VDFC_POS_MASK, DFCMEM1); - - if (vdfc->corr_mode == VPFE_ISIF_VDFC_NORMAL || - vdfc->corr_mode == VPFE_ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { - isif_write(isif->isif_cfg.base_addr, - vdfc->table[i].level_at_pos, DFCMEM2); - isif_write(isif->isif_cfg.base_addr, - vdfc->table[i].level_up_pixels, DFCMEM3); - isif_write(isif->isif_cfg.base_addr, - vdfc->table[i].level_low_pixels, DFCMEM4); - } - val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL); - /* clear DFCMARST and set DFCMWR */ - val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT); - val |= 1; - isif_write(isif->isif_cfg.base_addr, val, DFCMEMCTL); - - count = DFC_WRITE_WAIT_COUNT; - while (count && (isif_read(isif->isif_cfg.base_addr, - DFCMEMCTL) & 0x01)) - count--; - - val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL); - if (!count) { - pr_debug("defect table write timeout !!\n"); - return; - } - } - if (vdfc->num_vdefects < VPFE_ISIF_VDFC_TABLE_SIZE) { - /* Extra cycle needed */ - isif_write(isif->isif_cfg.base_addr, 0, DFCMEM0); - isif_write(isif->isif_cfg.base_addr, - DM365_ISIF_MAX_DFCMEM1, DFCMEM1); - isif_write(isif->isif_cfg.base_addr, - DM365_ISIF_DFCMWR_MEMORY_WRITE, DFCMEMCTL); - } - /* enable VDFC */ - isif_merge(isif->isif_cfg.base_addr, (1 << ISIF_VDFC_EN_SHIFT), - (1 << ISIF_VDFC_EN_SHIFT), DFCCTL); - - isif_merge(isif->isif_cfg.base_addr, (1 << ISIF_VDFC_EN_SHIFT), - (0 << ISIF_VDFC_EN_SHIFT), DFCCTL); - - isif_write(isif->isif_cfg.base_addr, 0x6, DFCMEMCTL); - for (i = 0; i < vdfc->num_vdefects; i++) { - count = DFC_WRITE_WAIT_COUNT; - while (count && - (isif_read(isif->isif_cfg.base_addr, DFCMEMCTL) & 0x2)) - count--; - val = isif_read(isif->isif_cfg.base_addr, DFCMEMCTL); - if (!count) { - pr_debug("defect table write timeout !!\n"); - return; - } - isif_write(isif->isif_cfg.base_addr, - DM365_ISIF_DFCMRD_MEMORY_READ, DFCMEMCTL); - } -} - -static void -isif_config_csc(struct vpfe_isif_device *isif, struct vpfe_isif_df_csc *df_csc) -{ - u32 val1; - u32 val2; - u32 i; - - if (!df_csc->csc.en) { - isif_write(isif->isif_cfg.base_addr, 0, CSCCTL); - return; - } - /* initialize all bits to 0 */ - val1 = 0; - for (i = 0; i < VPFE_ISIF_CSC_NUM_COEFF; i++) { - if ((i % 2) == 0) { - /* CSCM - LSB */ - val1 = ((df_csc->csc.coeff[i].integer & - ISIF_CSC_COEF_INTEG_MASK) << - ISIF_CSC_COEF_INTEG_SHIFT) | - ((df_csc->csc.coeff[i].decimal & - ISIF_CSC_COEF_DECIMAL_MASK)); - } else { - - /* CSCM - MSB */ - val2 = ((df_csc->csc.coeff[i].integer & - ISIF_CSC_COEF_INTEG_MASK) << - ISIF_CSC_COEF_INTEG_SHIFT) | - ((df_csc->csc.coeff[i].decimal & - ISIF_CSC_COEF_DECIMAL_MASK)); - val2 <<= ISIF_CSCM_MSB_SHIFT; - val2 |= val1; - isif_write(isif->isif_cfg.base_addr, val2, - (CSCM0 + ((i-1) << 1))); - } - } - /* program the active area */ - isif_write(isif->isif_cfg.base_addr, df_csc->start_pix & - ISIF_DF_CSC_SPH_MASK, FMTSPH); - /* - * one extra pixel as required for CSC. Actually number of - * pixel - 1 should be configured in this register. So we - * need to subtract 1 before writing to FMTSPH, but we will - * not do this since csc requires one extra pixel - */ - isif_write(isif->isif_cfg.base_addr, df_csc->num_pixels & - ISIF_DF_CSC_SPH_MASK, FMTLNH); - isif_write(isif->isif_cfg.base_addr, df_csc->start_line & - ISIF_DF_CSC_SPH_MASK, FMTSLV); - /* - * one extra line as required for CSC. See reason documented for - * num_pixels - */ - isif_write(isif->isif_cfg.base_addr, df_csc->num_lines & - ISIF_DF_CSC_SPH_MASK, FMTLNV); - /* Enable CSC */ - isif_write(isif->isif_cfg.base_addr, 1, CSCCTL); -} - -static void -isif_config_linearization(struct vpfe_isif_device *isif, - struct vpfe_isif_linearize *linearize) -{ - u32 val; - u32 i; - - if (!linearize->en) { - isif_write(isif->isif_cfg.base_addr, 0, LINCFG0); - return; - } - /* shift value for correction */ - val = (linearize->corr_shft & ISIF_LIN_CORRSFT_MASK) << - ISIF_LIN_CORRSFT_SHIFT; - /* enable */ - val |= 1; - isif_write(isif->isif_cfg.base_addr, val, LINCFG0); - /* Scale factor */ - val = (linearize->scale_fact.integer & 1) << - ISIF_LIN_SCALE_FACT_INTEG_SHIFT; - val |= linearize->scale_fact.decimal & ISIF_LIN_SCALE_FACT_DECIMAL_MASK; - isif_write(isif->isif_cfg.base_addr, val, LINCFG1); - - for (i = 0; i < VPFE_ISIF_LINEAR_TAB_SIZE; i++) { - val = linearize->table[i] & ISIF_LIN_ENTRY_MASK; - if (i%2) - isif_regw_lin_tbl(isif, val, ((i >> 1) << 2), 1); - else - isif_regw_lin_tbl(isif, val, ((i >> 1) << 2), 0); - } -} - -static void -isif_config_culling(struct vpfe_isif_device *isif, struct vpfe_isif_cul *cul) -{ - u32 val; - - /* Horizontal pattern */ - val = cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT; - val |= cul->hcpat_odd; - isif_write(isif->isif_cfg.base_addr, val, CULH); - /* vertical pattern */ - isif_write(isif->isif_cfg.base_addr, cul->vcpat, CULV); - /* LPF */ - isif_merge(isif->isif_cfg.base_addr, ISIF_LPF_MASK << ISIF_LPF_SHIFT, - cul->en_lpf << ISIF_LPF_SHIFT, MODESET); -} - -static int isif_get_pix_fmt(u32 mbus_code) -{ - switch (mbus_code) { - case MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8: - case MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8: - case MEDIA_BUS_FMT_SGRBG12_1X12: - return ISIF_PIXFMT_RAW; - - case MEDIA_BUS_FMT_YUYV8_2X8: - case MEDIA_BUS_FMT_UYVY8_2X8: - case MEDIA_BUS_FMT_YUYV10_2X10: - case MEDIA_BUS_FMT_Y8_1X8: - return ISIF_PIXFMT_YCBCR_8BIT; - - case MEDIA_BUS_FMT_YUYV8_1X16: - case MEDIA_BUS_FMT_YUYV10_1X20: - return ISIF_PIXFMT_YCBCR_16BIT; - - default: - break; - } - return -EINVAL; -} - -#define ISIF_INTERLACE_INVERSE_MODE 0x4b6d -#define ISIF_INTERLACE_NON_INVERSE_MODE 0x0b6d -#define ISIF_PROGRESSIVE_INVERSE_MODE 0x4000 -#define ISIF_PROGRESSIVE_NON_INVERSE_MODE 0x0000 - -static int isif_config_raw(struct v4l2_subdev *sd, int mode) -{ - struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd); - struct isif_params_raw *params = &isif->isif_cfg.bayer; - struct vpfe_isif_raw_config *module_params = - &isif->isif_cfg.bayer.config_params; - struct v4l2_mbus_framefmt *format; - int pix_fmt; - u32 val; - - format = &isif->formats[ISIF_PAD_SINK]; - - /* In case of user has set BT656IF earlier, it should be reset - * when configuring for raw input. - */ - isif_write(isif->isif_cfg.base_addr, 0, REC656IF); - /* Configure CCDCFG register - * Set CCD Not to swap input since input is RAW data - * Set FID detection function to Latch at V-Sync - * Set WENLOG - isif valid area - * Set TRGSEL - * Set EXTRG - * Packed to 8 or 16 bits - */ - val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC | - ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN | - ISIF_CCDCFG_EXTRG_DISABLE | (isif->isif_cfg.data_pack & - ISIF_DATA_PACK_MASK); - isif_write(isif->isif_cfg.base_addr, val, CCDCFG); - - pix_fmt = isif_get_pix_fmt(format->code); - if (pix_fmt < 0) { - pr_debug("Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - /* - * Configure the vertical sync polarity(MODESET.VDPOL) - * Configure the horizontal sync polarity (MODESET.HDPOL) - * Configure frame id polarity (MODESET.FLDPOL) - * Configure data polarity - * Configure External WEN Selection - * Configure frame format(progressive or interlace) - * Configure pixel format (Input mode) - * Configure the data shift - */ - val = ISIF_VDHDOUT_INPUT | ((params->vd_pol & ISIF_VD_POL_MASK) << - ISIF_VD_POL_SHIFT) | ((params->hd_pol & ISIF_HD_POL_MASK) << - ISIF_HD_POL_SHIFT) | ((params->fid_pol & ISIF_FID_POL_MASK) << - ISIF_FID_POL_SHIFT) | ((ISIF_DATAPOL_NORMAL & - ISIF_DATAPOL_MASK) << ISIF_DATAPOL_SHIFT) | ((ISIF_EXWEN_DISABLE & - ISIF_EXWEN_MASK) << ISIF_EXWEN_SHIFT) | ((params->frm_fmt & - ISIF_FRM_FMT_MASK) << ISIF_FRM_FMT_SHIFT) | ((pix_fmt & - ISIF_INPUT_MASK) << ISIF_INPUT_SHIFT); - - /* currently only MEDIA_BUS_FMT_SGRBG12_1X12 is - * supported. shift appropriately depending on - * different MBUS fmt's added - */ - if (format->code == MEDIA_BUS_FMT_SGRBG12_1X12) - val |= ((VPFE_ISIF_NO_SHIFT & - ISIF_DATASFT_MASK) << ISIF_DATASFT_SHIFT); - - isif_write(isif->isif_cfg.base_addr, val, MODESET); - /* - * Configure GAMMAWD register - * CFA pattern setting - */ - val = (params->cfa_pat & ISIF_GAMMAWD_CFA_MASK) << - ISIF_GAMMAWD_CFA_SHIFT; - /* Gamma msb */ - if (params->v4l2_pix_fmt == V4L2_PIX_FMT_SGRBG10ALAW8) - val = val | ISIF_ALAW_ENABLE; - - val = val | ((params->data_msb & ISIF_ALAW_GAMA_WD_MASK) << - ISIF_ALAW_GAMA_WD_SHIFT); - - isif_write(isif->isif_cfg.base_addr, val, CGAMMAWD); - /* Configure DPCM compression settings */ - if (params->v4l2_pix_fmt == V4L2_PIX_FMT_SGRBG10DPCM8) { - val = BIT(ISIF_DPCM_EN_SHIFT); - val |= (params->dpcm_predictor & - ISIF_DPCM_PREDICTOR_MASK) << ISIF_DPCM_PREDICTOR_SHIFT; - } - isif_write(isif->isif_cfg.base_addr, val, MISC); - /* Configure Gain & Offset */ - isif_config_gain_offset(isif); - /* Configure Color pattern */ - if (format->code == MEDIA_BUS_FMT_SGRBG12_1X12) - val = isif_sgrbg_pattern; - else - /* default set to rggb */ - val = isif_srggb_pattern; - - isif_write(isif->isif_cfg.base_addr, val, CCOLP); - - /* Configure HSIZE register */ - val = (params->horz_flip_en & ISIF_HSIZE_FLIP_MASK) << - ISIF_HSIZE_FLIP_SHIFT; - - /* calculate line offset in 32 bytes based on pack value */ - if (isif->isif_cfg.data_pack == ISIF_PACK_8BIT) - val |= ((params->win.width + 31) >> 5) & ISIF_LINEOFST_MASK; - else if (isif->isif_cfg.data_pack == ISIF_PACK_12BIT) - val |= ((((params->win.width + (params->win.width >> 2)) + - 31) >> 5) & ISIF_LINEOFST_MASK); - else - val |= (((params->win.width * 2) + 31) >> 5) & - ISIF_LINEOFST_MASK; - isif_write(isif->isif_cfg.base_addr, val, HSIZE); - /* Configure SDOFST register */ - if (params->frm_fmt == ISIF_FRMFMT_INTERLACED) { - if (params->image_invert_en) - /* For interlace inverse mode */ - isif_write(isif->isif_cfg.base_addr, - ISIF_INTERLACE_INVERSE_MODE, SDOFST); - else - /* For interlace non inverse mode */ - isif_write(isif->isif_cfg.base_addr, - ISIF_INTERLACE_NON_INVERSE_MODE, SDOFST); - } else if (params->frm_fmt == ISIF_FRMFMT_PROGRESSIVE) { - if (params->image_invert_en) - isif_write(isif->isif_cfg.base_addr, - ISIF_PROGRESSIVE_INVERSE_MODE, SDOFST); - else - /* For progessive non inverse mode */ - isif_write(isif->isif_cfg.base_addr, - ISIF_PROGRESSIVE_NON_INVERSE_MODE, SDOFST); - } - /* Configure video window */ - isif_setwin(isif, ¶ms->win, params->frm_fmt, 1, mode); - /* Configure Black Clamp */ - isif_config_bclamp(isif, &module_params->bclamp); - /* Configure Vertical Defection Pixel Correction */ - isif_config_dfc(isif, &module_params->dfc); - if (!module_params->df_csc.df_or_csc) - /* Configure Color Space Conversion */ - isif_config_csc(isif, &module_params->df_csc); - - isif_config_linearization(isif, &module_params->linearize); - /* Configure Culling */ - isif_config_culling(isif, &module_params->culling); - /* Configure Horizontal and vertical offsets(DFC,LSC,Gain) */ - val = module_params->horz_offset & ISIF_DATA_H_OFFSET_MASK; - isif_write(isif->isif_cfg.base_addr, val, DATAHOFST); - - val = module_params->vert_offset & ISIF_DATA_V_OFFSET_MASK; - isif_write(isif->isif_cfg.base_addr, val, DATAVOFST); - - return 0; -} - -#define DM365_ISIF_HSIZE_MASK 0xffffffe0 -#define DM365_ISIF_SDOFST_2_LINES 0x00000249 - -/* This function will configure ISIF for YCbCr parameters. */ -static int isif_config_ycbcr(struct v4l2_subdev *sd, int mode) -{ - struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd); - struct isif_ycbcr_config *params = &isif->isif_cfg.ycbcr; - struct v4l2_mbus_framefmt *format; - int pix_fmt; - u32 modeset; - u32 ccdcfg; - - format = &isif->formats[ISIF_PAD_SINK]; - /* - * first reset the ISIF - * all registers have default values after reset - * This is important since we assume default values to be set in - * a lot of registers that we didn't touch - */ - /* start with all bits zero */ - ccdcfg = 0; - modeset = 0; - pix_fmt = isif_get_pix_fmt(format->code); - if (pix_fmt < 0) { - pr_debug("Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - /* configure pixel format or input mode */ - modeset = modeset | ((pix_fmt & ISIF_INPUT_MASK) << - ISIF_INPUT_SHIFT) | ((params->frm_fmt & ISIF_FRM_FMT_MASK) << - ISIF_FRM_FMT_SHIFT) | (((params->fid_pol & - ISIF_FID_POL_MASK) << ISIF_FID_POL_SHIFT)) | - (((params->hd_pol & ISIF_HD_POL_MASK) << ISIF_HD_POL_SHIFT)) | - (((params->vd_pol & ISIF_VD_POL_MASK) << ISIF_VD_POL_SHIFT)); - /* pack the data to 8-bit CCDCCFG */ - switch (format->code) { - case MEDIA_BUS_FMT_YUYV8_2X8: - case MEDIA_BUS_FMT_UYVY8_2X8: - if (pix_fmt != ISIF_PIXFMT_YCBCR_8BIT) { - pr_debug("Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - modeset |= ((VPFE_PINPOL_NEGATIVE & ISIF_VD_POL_MASK) << - ISIF_VD_POL_SHIFT); - isif_write(isif->isif_cfg.base_addr, 3, REC656IF); - ccdcfg = ccdcfg | ISIF_PACK_8BIT | ISIF_YCINSWP_YCBCR; - break; - - case MEDIA_BUS_FMT_YUYV10_2X10: - if (pix_fmt != ISIF_PIXFMT_YCBCR_8BIT) { - pr_debug("Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - /* setup BT.656, embedded sync */ - isif_write(isif->isif_cfg.base_addr, 3, REC656IF); - /* enable 10 bit mode in ccdcfg */ - ccdcfg = ccdcfg | ISIF_PACK_8BIT | ISIF_YCINSWP_YCBCR | - ISIF_BW656_ENABLE; - break; - - case MEDIA_BUS_FMT_YUYV10_1X20: - if (pix_fmt != ISIF_PIXFMT_YCBCR_16BIT) { - pr_debug("Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - isif_write(isif->isif_cfg.base_addr, 3, REC656IF); - break; - - case MEDIA_BUS_FMT_Y8_1X8: - ccdcfg |= ISIF_PACK_8BIT; - ccdcfg |= ISIF_YCINSWP_YCBCR; - if (pix_fmt != ISIF_PIXFMT_YCBCR_8BIT) { - pr_debug("Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - break; - - case MEDIA_BUS_FMT_YUYV8_1X16: - if (pix_fmt != ISIF_PIXFMT_YCBCR_16BIT) { - pr_debug("Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - break; - - default: - /* should never come here */ - pr_debug("Invalid interface type\n"); - return -EINVAL; - } - isif_write(isif->isif_cfg.base_addr, modeset, MODESET); - /* Set up pix order */ - ccdcfg |= (params->pix_order & ISIF_PIX_ORDER_MASK) << - ISIF_PIX_ORDER_SHIFT; - isif_write(isif->isif_cfg.base_addr, ccdcfg, CCDCFG); - /* configure video window */ - if (format->code == MEDIA_BUS_FMT_YUYV10_1X20 || - format->code == MEDIA_BUS_FMT_YUYV8_1X16) - isif_setwin(isif, ¶ms->win, params->frm_fmt, 1, mode); - else - isif_setwin(isif, ¶ms->win, params->frm_fmt, 2, mode); - - /* - * configure the horizontal line offset - * this is done by rounding up width to a multiple of 16 pixels - * and multiply by two to account for y:cb:cr 4:2:2 data - */ - isif_write(isif->isif_cfg.base_addr, - ((((params->win.width * 2) + 31) & - DM365_ISIF_HSIZE_MASK) >> 5), HSIZE); - - /* configure the memory line offset */ - if (params->frm_fmt == ISIF_FRMFMT_INTERLACED && - params->buf_type == ISIF_BUFTYPE_FLD_INTERLEAVED) - /* two fields are interleaved in memory */ - isif_write(isif->isif_cfg.base_addr, - DM365_ISIF_SDOFST_2_LINES, SDOFST); - return 0; -} - -static int isif_configure(struct v4l2_subdev *sd, int mode) -{ - struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd); - struct v4l2_mbus_framefmt *format; - - format = &isif->formats[ISIF_PAD_SINK]; - - switch (format->code) { - case MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8: - case MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8: - case MEDIA_BUS_FMT_SGRBG12_1X12: - return isif_config_raw(sd, mode); - - case MEDIA_BUS_FMT_YUYV8_2X8: - case MEDIA_BUS_FMT_UYVY8_2X8: - case MEDIA_BUS_FMT_YUYV10_2X10: - case MEDIA_BUS_FMT_Y8_1X8: - case MEDIA_BUS_FMT_YUYV8_1X16: - case MEDIA_BUS_FMT_YUYV10_1X20: - return isif_config_ycbcr(sd, mode); - - default: - break; - } - return -EINVAL; -} - -/* - * isif_set_stream() - Enable/Disable streaming on the ISIF module - * @sd: VPFE ISIF V4L2 subdevice - * @enable: Enable/disable stream - */ -static int isif_set_stream(struct v4l2_subdev *sd, int enable) -{ - struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd); - int ret; - - if (enable) { - ret = isif_configure(sd, - (isif->output == ISIF_OUTPUT_MEMORY) ? 0 : 1); - if (ret) - return ret; - if (isif->output == ISIF_OUTPUT_MEMORY) - isif_enable_output_to_sdram(isif, 1); - isif_enable(isif, 1); - } else { - isif_enable(isif, 0); - isif_enable_output_to_sdram(isif, 0); - } - - return 0; -} - -/* - * __isif_get_format() - helper function for getting isif format - * @isif: pointer to isif private structure. - * @pad: pad number. - * @cfg: V4L2 subdev pad config - * @which: wanted subdev format. - */ -static struct v4l2_mbus_framefmt * -__isif_get_format(struct vpfe_isif_device *isif, - struct v4l2_subdev_pad_config *cfg, unsigned int pad, - enum v4l2_subdev_format_whence which) -{ - if (which == V4L2_SUBDEV_FORMAT_TRY) - return v4l2_subdev_get_try_format(&isif->subdev, cfg, pad); - - return &isif->formats[pad]; -} - -/* - * isif_set_format() - set format on pad - * @sd : VPFE ISIF device - * @cfg : V4L2 subdev pad config - * @fmt : pointer to v4l2 subdev format structure - * - * Return 0 on success or -EINVAL if format or pad is invalid - */ -static int -isif_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_format *fmt) -{ - struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd); - struct vpfe_device *vpfe_dev = to_vpfe_device(isif); - struct v4l2_mbus_framefmt *format; - - format = __isif_get_format(isif, cfg, fmt->pad, fmt->which); - if (format == NULL) - return -EINVAL; - - isif_try_format(isif, cfg, fmt); - memcpy(format, &fmt->format, sizeof(*format)); - - if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) - return 0; - - if (fmt->pad == ISIF_PAD_SOURCE) - return isif_config_format(vpfe_dev, fmt->pad); - - return 0; -} - -/* - * isif_get_format() - Retrieve the video format on a pad - * @sd: VPFE ISIF V4L2 subdevice - * @cfg: V4L2 subdev pad config - * @fmt: pointer to v4l2 subdev format structure - * - * Return 0 on success or -EINVAL if the pad is invalid or doesn't correspond - * to the format type. - */ -static int -isif_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_format *fmt) -{ - struct vpfe_isif_device *vpfe_isif = v4l2_get_subdevdata(sd); - struct v4l2_mbus_framefmt *format; - - format = __isif_get_format(vpfe_isif, cfg, fmt->pad, fmt->which); - if (format == NULL) - return -EINVAL; - - memcpy(&fmt->format, format, sizeof(fmt->format)); - - return 0; -} - -/* - * isif_enum_frame_size() - enum frame sizes on pads - * @sd: VPFE isif V4L2 subdevice - * @cfg: V4L2 subdev pad config - * @code: pointer to v4l2_subdev_frame_size_enum structure - */ -static int -isif_enum_frame_size(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_frame_size_enum *fse) -{ - struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd); - struct v4l2_subdev_format format; - - if (fse->index != 0) - return -EINVAL; - - format.pad = fse->pad; - format.format.code = fse->code; - format.format.width = 1; - format.format.height = 1; - format.which = fse->which; - isif_try_format(isif, cfg, &format); - fse->min_width = format.format.width; - fse->min_height = format.format.height; - - if (format.format.code != fse->code) - return -EINVAL; - - format.pad = fse->pad; - format.format.code = fse->code; - format.format.width = -1; - format.format.height = -1; - format.which = fse->which; - isif_try_format(isif, cfg, &format); - fse->max_width = format.format.width; - fse->max_height = format.format.height; - - return 0; -} - -/* - * isif_enum_mbus_code() - enum mbus codes for pads - * @sd: VPFE isif V4L2 subdevice - * @cfg: V4L2 subdev pad config - * @code: pointer to v4l2_subdev_mbus_code_enum structure - */ -static int -isif_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_mbus_code_enum *code) -{ - switch (code->pad) { - case ISIF_PAD_SINK: - case ISIF_PAD_SOURCE: - if (code->index >= ARRAY_SIZE(isif_fmts)) - return -EINVAL; - code->code = isif_fmts[code->index]; - break; - - default: - return -EINVAL; - } - - return 0; -} - -/* - * isif_pad_set_selection() - set crop rectangle on pad - * @sd: VPFE isif V4L2 subdevice - * @cfg: V4L2 subdev pad config - * @code: pointer to v4l2_subdev_mbus_code_enum structure - * - * Return 0 on success, -EINVAL if pad is invalid - */ -static int -isif_pad_set_selection(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_selection *sel) -{ - struct vpfe_isif_device *vpfe_isif = v4l2_get_subdevdata(sd); - struct v4l2_mbus_framefmt *format; - - /* check whether it's a valid pad and target */ - if (sel->pad != ISIF_PAD_SINK || sel->target != V4L2_SEL_TGT_CROP) - return -EINVAL; - - format = __isif_get_format(vpfe_isif, cfg, sel->pad, sel->which); - if (format == NULL) - return -EINVAL; - - /* check wether crop rect is within limits */ - if (sel->r.top < 0 || sel->r.left < 0 || - (sel->r.left + sel->r.width > - vpfe_isif->formats[ISIF_PAD_SINK].width) || - (sel->r.top + sel->r.height > - vpfe_isif->formats[ISIF_PAD_SINK].height)) { - sel->r.left = 0; - sel->r.top = 0; - sel->r.width = format->width; - sel->r.height = format->height; - } - /* adjust the width to 16 pixel boundary */ - sel->r.width = (sel->r.width + 15) & ~0xf; - vpfe_isif->crop = sel->r; - if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) { - isif_set_image_window(vpfe_isif); - } else { - struct v4l2_rect *rect; - - rect = v4l2_subdev_get_try_crop(sd, cfg, ISIF_PAD_SINK); - memcpy(rect, &vpfe_isif->crop, sizeof(*rect)); - } - return 0; -} - -/* - * isif_pad_get_selection() - get crop rectangle on pad - * @sd: VPFE isif V4L2 subdevice - * @cfg: V4L2 subdev pad config - * @code: pointer to v4l2_subdev_mbus_code_enum structure - * - * Return 0 on success, -EINVAL if pad is invalid - */ -static int -isif_pad_get_selection(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_selection *sel) -{ - struct vpfe_isif_device *vpfe_isif = v4l2_get_subdevdata(sd); - - /* check whether it's a valid pad and target */ - if (sel->pad != ISIF_PAD_SINK || sel->target != V4L2_SEL_TGT_CROP) - return -EINVAL; - - if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { - struct v4l2_rect *rect; - - rect = v4l2_subdev_get_try_crop(sd, cfg, ISIF_PAD_SINK); - memcpy(&sel->r, rect, sizeof(*rect)); - } else { - sel->r = vpfe_isif->crop; - } - - return 0; -} - -/* - * isif_init_formats() - Initialize formats on all pads - * @sd: VPFE isif V4L2 subdevice - * @fh: V4L2 subdev file handle - * - * Initialize all pad formats with default values. Try formats are initialized - * on the file handle. - */ -static int -isif_init_formats(struct v4l2_subdev *sd, - struct v4l2_subdev_fh *fh) -{ - struct v4l2_subdev_format format; - struct v4l2_subdev_selection sel; - - memset(&format, 0, sizeof(format)); - format.pad = ISIF_PAD_SINK; - format.which = V4L2_SUBDEV_FORMAT_TRY; - format.format.code = MEDIA_BUS_FMT_SGRBG12_1X12; - format.format.width = MAX_WIDTH; - format.format.height = MAX_HEIGHT; - isif_set_format(sd, fh->pad, &format); - - memset(&format, 0, sizeof(format)); - format.pad = ISIF_PAD_SOURCE; - format.which = V4L2_SUBDEV_FORMAT_TRY; - format.format.code = MEDIA_BUS_FMT_SGRBG12_1X12; - format.format.width = MAX_WIDTH; - format.format.height = MAX_HEIGHT; - isif_set_format(sd, fh->pad, &format); - - memset(&sel, 0, sizeof(sel)); - sel.pad = ISIF_PAD_SINK; - sel.which = V4L2_SUBDEV_FORMAT_TRY; - sel.target = V4L2_SEL_TGT_CROP; - sel.r.width = MAX_WIDTH; - sel.r.height = MAX_HEIGHT; - isif_pad_set_selection(sd, fh->pad, &sel); - - return 0; -} - -/* subdev core operations */ -static const struct v4l2_subdev_core_ops isif_v4l2_core_ops = { - .ioctl = isif_ioctl, -}; - -/* subdev file operations */ -static const struct v4l2_subdev_internal_ops isif_v4l2_internal_ops = { - .open = isif_init_formats, -}; - -/* subdev video operations */ -static const struct v4l2_subdev_video_ops isif_v4l2_video_ops = { - .s_stream = isif_set_stream, -}; - -/* subdev pad operations */ -static const struct v4l2_subdev_pad_ops isif_v4l2_pad_ops = { - .enum_mbus_code = isif_enum_mbus_code, - .enum_frame_size = isif_enum_frame_size, - .get_fmt = isif_get_format, - .set_fmt = isif_set_format, - .set_selection = isif_pad_set_selection, - .get_selection = isif_pad_get_selection, -}; - -/* subdev operations */ -static const struct v4l2_subdev_ops isif_v4l2_ops = { - .core = &isif_v4l2_core_ops, - .video = &isif_v4l2_video_ops, - .pad = &isif_v4l2_pad_ops, -}; - -/* - * Media entity operations - */ - -/* - * isif_link_setup() - Setup isif connections - * @entity: isif media entity - * @local: Pad at the local end of the link - * @remote: Pad at the remote end of the link - * @flags: Link flags - * - * return -EINVAL or zero on success - */ -static int -isif_link_setup(struct media_entity *entity, const struct media_pad *local, - const struct media_pad *remote, u32 flags) -{ - struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); - struct vpfe_isif_device *isif = v4l2_get_subdevdata(sd); - unsigned int index = local->index; - - /* FIXME: this is actually a hack! */ - if (is_media_entity_v4l2_subdev(remote->entity)) - index |= 2 << 16; - - switch (index) { - case ISIF_PAD_SINK | 2 << 16: - /* read from decoder/sensor */ - if (!(flags & MEDIA_LNK_FL_ENABLED)) { - isif->input = ISIF_INPUT_NONE; - break; - } - if (isif->input != ISIF_INPUT_NONE) - return -EBUSY; - isif->input = ISIF_INPUT_PARALLEL; - break; - - case ISIF_PAD_SOURCE: - /* write to memory */ - if (flags & MEDIA_LNK_FL_ENABLED) - isif->output = ISIF_OUTPUT_MEMORY; - else - isif->output = ISIF_OUTPUT_NONE; - break; - - case ISIF_PAD_SOURCE | 2 << 16: - if (flags & MEDIA_LNK_FL_ENABLED) - isif->output = ISIF_OUTPUT_IPIPEIF; - else - isif->output = ISIF_OUTPUT_NONE; - break; - - default: - return -EINVAL; - } - - return 0; -} -static const struct media_entity_operations isif_media_ops = { - .link_setup = isif_link_setup, -}; - -/* - * vpfe_isif_unregister_entities() - isif unregister entity - * @isif - pointer to isif subdevice structure. - */ -void vpfe_isif_unregister_entities(struct vpfe_isif_device *isif) -{ - vpfe_video_unregister(&isif->video_out); - /* unregister subdev */ - v4l2_device_unregister_subdev(&isif->subdev); - /* cleanup entity */ - media_entity_cleanup(&isif->subdev.entity); -} - -static void isif_restore_defaults(struct vpfe_isif_device *isif) -{ - enum vpss_ccdc_source_sel source = VPSS_CCDCIN; - int i; - - memset(&isif->isif_cfg.bayer.config_params, 0, - sizeof(struct vpfe_isif_raw_config)); - - isif->isif_cfg.bayer.config_params.linearize.corr_shft = - VPFE_ISIF_NO_SHIFT; - isif->isif_cfg.bayer.config_params.linearize.scale_fact.integer = 1; - isif->isif_cfg.bayer.config_params.culling.hcpat_odd = - ISIF_CULLING_HCAPT_ODD; - isif->isif_cfg.bayer.config_params.culling.hcpat_even = - ISIF_CULLING_HCAPT_EVEN; - isif->isif_cfg.bayer.config_params.culling.vcpat = ISIF_CULLING_VCAPT; - /* Enable clock to ISIF, IPIPEIF and BL */ - vpss_enable_clock(VPSS_CCDC_CLOCK, 1); - vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1); - vpss_enable_clock(VPSS_BL_CLOCK, 1); - - /* set all registers to default value */ - for (i = 0; i <= 0x1f8; i += 4) - isif_write(isif->isif_cfg.base_addr, 0, i); - /* no culling support */ - isif_write(isif->isif_cfg.base_addr, 0xffff, CULH); - isif_write(isif->isif_cfg.base_addr, 0xff, CULV); - - /* Set default offset and gain */ - isif_config_gain_offset(isif); - vpss_select_ccdc_source(source); -} - -/* - * vpfe_isif_register_entities() - isif register entity - * @isif - pointer to isif subdevice structure. - * @vdev: pointer to v4l2 device structure. - */ -int vpfe_isif_register_entities(struct vpfe_isif_device *isif, - struct v4l2_device *vdev) -{ - struct vpfe_device *vpfe_dev = to_vpfe_device(isif); - unsigned int flags; - int ret; - - /* Register the subdev */ - ret = v4l2_device_register_subdev(vdev, &isif->subdev); - if (ret < 0) - return ret; - - isif_restore_defaults(isif); - ret = vpfe_video_register(&isif->video_out, vdev); - if (ret) { - pr_err("Failed to register isif video out device\n"); - goto out_video_register; - } - isif->video_out.vpfe_dev = vpfe_dev; - flags = 0; - /* connect isif to video node */ - ret = media_create_pad_link(&isif->subdev.entity, 1, - &isif->video_out.video_dev.entity, - 0, flags); - if (ret < 0) - goto out_create_link; - return 0; -out_create_link: - vpfe_video_unregister(&isif->video_out); -out_video_register: - v4l2_device_unregister_subdev(&isif->subdev); - return ret; -} - -/* ------------------------------------------------------------------- - * V4L2 subdev control operations - */ - -static int vpfe_isif_s_ctrl(struct v4l2_ctrl *ctrl) -{ - struct vpfe_isif_device *isif = - container_of(ctrl->handler, struct vpfe_isif_device, ctrls); - struct isif_oper_config *config = &isif->isif_cfg; - - switch (ctrl->id) { - case VPFE_CID_DPCM_PREDICTOR: - config->bayer.dpcm_predictor = ctrl->val; - break; - - case VPFE_ISIF_CID_CRGAIN: - config->isif_gain_params.cr_gain = ctrl->val; - break; - - case VPFE_ISIF_CID_CGRGAIN: - config->isif_gain_params.cgr_gain = ctrl->val; - break; - - case VPFE_ISIF_CID_CGBGAIN: - config->isif_gain_params.cgb_gain = ctrl->val; - break; - - case VPFE_ISIF_CID_CBGAIN: - config->isif_gain_params.cb_gain = ctrl->val; - break; - - case VPFE_ISIF_CID_GAIN_OFFSET: - config->isif_gain_params.offset = ctrl->val; - break; - - default: - return -EINVAL; - } - return 0; -} - -static const struct v4l2_ctrl_ops vpfe_isif_ctrl_ops = { - .s_ctrl = vpfe_isif_s_ctrl, -}; - -static const struct v4l2_ctrl_config vpfe_isif_dpcm_pred = { - .ops = &vpfe_isif_ctrl_ops, - .id = VPFE_CID_DPCM_PREDICTOR, - .name = "DPCM Predictor", - .type = V4L2_CTRL_TYPE_INTEGER, - .min = 0, - .max = 1, - .step = 1, - .def = 0, -}; - -static const struct v4l2_ctrl_config vpfe_isif_crgain = { - .ops = &vpfe_isif_ctrl_ops, - .id = VPFE_ISIF_CID_CRGAIN, - .name = "CRGAIN", - .type = V4L2_CTRL_TYPE_INTEGER, - .min = 0, - .max = (1 << 12) - 1, - .step = 1, - .def = 0, -}; - -static const struct v4l2_ctrl_config vpfe_isif_cgrgain = { - .ops = &vpfe_isif_ctrl_ops, - .id = VPFE_ISIF_CID_CGRGAIN, - .name = "CGRGAIN", - .type = V4L2_CTRL_TYPE_INTEGER, - .min = 0, - .max = (1 << 12) - 1, - .step = 1, - .def = 0, -}; - -static const struct v4l2_ctrl_config vpfe_isif_cgbgain = { - .ops = &vpfe_isif_ctrl_ops, - .id = VPFE_ISIF_CID_CGBGAIN, - .name = "CGBGAIN", - .type = V4L2_CTRL_TYPE_INTEGER, - .min = 0, - .max = (1 << 12) - 1, - .step = 1, - .def = 0, -}; - -static const struct v4l2_ctrl_config vpfe_isif_cbgain = { - .ops = &vpfe_isif_ctrl_ops, - .id = VPFE_ISIF_CID_CBGAIN, - .name = "CBGAIN", - .type = V4L2_CTRL_TYPE_INTEGER, - .min = 0, - .max = (1 << 12) - 1, - .step = 1, - .def = 0, -}; - -static const struct v4l2_ctrl_config vpfe_isif_gain_offset = { - .ops = &vpfe_isif_ctrl_ops, - .id = VPFE_ISIF_CID_GAIN_OFFSET, - .name = "Gain Offset", - .type = V4L2_CTRL_TYPE_INTEGER, - .min = 0, - .max = (1 << 12) - 1, - .step = 1, - .def = 0, -}; - -static void isif_remove(struct vpfe_isif_device *isif, - struct platform_device *pdev) -{ - struct resource *res; - int i = 0; - - iounmap(isif->isif_cfg.base_addr); - iounmap(isif->isif_cfg.linear_tbl0_addr); - iounmap(isif->isif_cfg.linear_tbl1_addr); - - while (i < 3) { - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - if (res) - release_mem_region(res->start, - resource_size(res)); - i++; - } -} - -static void isif_config_defaults(struct vpfe_isif_device *isif) -{ - isif->isif_cfg.ycbcr.v4l2_pix_fmt = V4L2_PIX_FMT_UYVY; - isif->isif_cfg.ycbcr.pix_fmt = ISIF_PIXFMT_YCBCR_8BIT; - isif->isif_cfg.ycbcr.frm_fmt = ISIF_FRMFMT_INTERLACED; - isif->isif_cfg.ycbcr.fid_pol = VPFE_PINPOL_POSITIVE; - isif->isif_cfg.ycbcr.vd_pol = VPFE_PINPOL_POSITIVE; - isif->isif_cfg.ycbcr.hd_pol = VPFE_PINPOL_POSITIVE; - isif->isif_cfg.ycbcr.pix_order = ISIF_PIXORDER_CBYCRY; - isif->isif_cfg.ycbcr.buf_type = ISIF_BUFTYPE_FLD_INTERLEAVED; - - isif->isif_cfg.bayer.v4l2_pix_fmt = V4L2_PIX_FMT_SGRBG10ALAW8; - isif->isif_cfg.bayer.pix_fmt = ISIF_PIXFMT_RAW; - isif->isif_cfg.bayer.frm_fmt = ISIF_FRMFMT_PROGRESSIVE; - isif->isif_cfg.bayer.fid_pol = VPFE_PINPOL_POSITIVE; - isif->isif_cfg.bayer.vd_pol = VPFE_PINPOL_POSITIVE; - isif->isif_cfg.bayer.hd_pol = VPFE_PINPOL_POSITIVE; - isif->isif_cfg.bayer.cfa_pat = ISIF_CFA_PAT_MOSAIC; - isif->isif_cfg.bayer.data_msb = ISIF_BIT_MSB_11; - isif->isif_cfg.data_pack = ISIF_PACK_8BIT; -} -/* - * vpfe_isif_init() - Initialize V4L2 subdev and media entity - * @isif: VPFE isif module - * @pdev: Pointer to platform device structure. - * Return 0 on success and a negative error code on failure. - */ -int vpfe_isif_init(struct vpfe_isif_device *isif, struct platform_device *pdev) -{ - struct v4l2_subdev *sd = &isif->subdev; - struct media_pad *pads = &isif->pads[0]; - struct media_entity *me = &sd->entity; - static resource_size_t res_len; - struct resource *res; - void __iomem *addr; - int status; - int i = 0; - - /* Get the ISIF base address, linearization table0 and table1 addr. */ - while (i < 3) { - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - if (!res) { - status = -ENOENT; - goto fail_nobase_res; - } - res_len = resource_size(res); - res = request_mem_region(res->start, res_len, res->name); - if (!res) { - status = -EBUSY; - goto fail_nobase_res; - } - addr = ioremap_nocache(res->start, res_len); - if (!addr) { - status = -EBUSY; - goto fail_base_iomap; - } - switch (i) { - case 0: - /* ISIF base address */ - isif->isif_cfg.base_addr = addr; - break; - case 1: - /* ISIF linear tbl0 address */ - isif->isif_cfg.linear_tbl0_addr = addr; - break; - default: - /* ISIF linear tbl0 address */ - isif->isif_cfg.linear_tbl1_addr = addr; - break; - } - i++; - } - davinci_cfg_reg(DM365_VIN_CAM_WEN); - davinci_cfg_reg(DM365_VIN_CAM_VD); - davinci_cfg_reg(DM365_VIN_CAM_HD); - davinci_cfg_reg(DM365_VIN_YIN4_7_EN); - davinci_cfg_reg(DM365_VIN_YIN0_3_EN); - - /* queue ops */ - isif->video_out.ops = &isif_video_ops; - v4l2_subdev_init(sd, &isif_v4l2_ops); - sd->internal_ops = &isif_v4l2_internal_ops; - strscpy(sd->name, "DAVINCI ISIF", sizeof(sd->name)); - sd->grp_id = 1 << 16; /* group ID for davinci subdevs */ - v4l2_set_subdevdata(sd, isif); - sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE; - pads[ISIF_PAD_SINK].flags = MEDIA_PAD_FL_SINK; - pads[ISIF_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; - - isif->input = ISIF_INPUT_NONE; - isif->output = ISIF_OUTPUT_NONE; - me->ops = &isif_media_ops; - status = media_entity_pads_init(me, ISIF_PADS_NUM, pads); - if (status) - goto isif_fail; - isif->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - status = vpfe_video_init(&isif->video_out, "ISIF"); - if (status) { - pr_err("Failed to init isif-out video device\n"); - goto isif_fail; - } - v4l2_ctrl_handler_init(&isif->ctrls, 6); - v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_crgain, NULL); - v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_cgrgain, NULL); - v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_cgbgain, NULL); - v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_cbgain, NULL); - v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_gain_offset, NULL); - v4l2_ctrl_new_custom(&isif->ctrls, &vpfe_isif_dpcm_pred, NULL); - - v4l2_ctrl_handler_setup(&isif->ctrls); - sd->ctrl_handler = &isif->ctrls; - isif_config_defaults(isif); - return 0; -fail_base_iomap: - release_mem_region(res->start, res_len); - i--; -fail_nobase_res: - if (isif->isif_cfg.base_addr) - iounmap(isif->isif_cfg.base_addr); - if (isif->isif_cfg.linear_tbl0_addr) - iounmap(isif->isif_cfg.linear_tbl0_addr); - - while (i >= 0) { - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - release_mem_region(res->start, res_len); - i--; - } - return status; -isif_fail: - v4l2_ctrl_handler_free(&isif->ctrls); - isif_remove(isif, pdev); - return status; -} - -/* - * vpfe_isif_cleanup - isif module cleanup - * @isif: pointer to isif subdevice - * @dev: pointer to platform device structure - */ -void -vpfe_isif_cleanup(struct vpfe_isif_device *isif, struct platform_device *pdev) -{ - isif_remove(isif, pdev); -} |