5 files changed, 28 insertions, 357 deletions

diff --git a/drivers/staging/media/lirc/lirc_igorplugusb.c b/drivers/staging/media/lirc/lirc_igorplugusb.c
index 44b0d0766084..431d1e86ebf9 100644
--- a/drivers/staging/media/lirc/lirc_igorplugusb.c
+++ b/drivers/staging/media/lirc/lirc_igorplugusb.c
@@ -209,12 +209,6 @@ static int unregister_from_lirc(struct igorplug *ir)
 	struct lirc_driver *d;
 	int devnum;
 
-	if (!ir) {
-		dev_err(&ir->usbdev->dev,
-			"%s: called with NULL device struct!\n", __func__);
-		return -EINVAL;
-	}
-
 	devnum = ir->devnum;
 	d = ir->d;
 
diff --git a/drivers/staging/media/lirc/lirc_imon.c b/drivers/staging/media/lirc/lirc_imon.c
index a5b62eec5e21..96c76b33770b 100644
--- a/drivers/staging/media/lirc/lirc_imon.c
+++ b/drivers/staging/media/lirc/lirc_imon.c
@@ -189,6 +189,7 @@ MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes(default: no)");
 static void free_imon_context(struct imon_context *context)
 {
 	struct device *dev = context->driver->dev;
+
 	usb_free_urb(context->tx_urb);
 	usb_free_urb(context->rx_urb);
 	lirc_buffer_free(context->driver->rbuf);
@@ -481,8 +482,6 @@ static void usb_tx_callback(struct urb *urb)
 	/* notify waiters that write has finished */
 	atomic_set(&context->tx.busy, 0);
 	complete(&context->tx.finished);
-
-	return;
 }
 
 /**
@@ -547,7 +546,6 @@ static void ir_close(void *data)
 	}
 
 	mutex_unlock(&context->ctx_lock);
-	return;
 }
 
 /**
@@ -572,7 +570,6 @@ static void submit_data(struct imon_context *context)
 
 	lirc_buffer_write(context->driver->rbuf, buf);
 	wake_up(&context->driver->rbuf->wait_poll);
-	return;
 }
 
 static inline int tv2int(const struct timeval *a, const struct timeval *b)
@@ -656,6 +653,7 @@ static void imon_incoming_packet(struct imon_context *context,
 		mask = 0x80;
 		for (bit = 0; bit < 8; ++bit) {
 			int curr_bit = !(buf[octet] & mask);
+
 			if (curr_bit != context->rx.prev_bit) {
 				if (context->rx.count) {
 					submit_data(context);
@@ -707,8 +705,6 @@ static void usb_rx_callback(struct urb *urb)
 	}
 
 	usb_submit_urb(context->rx_urb, GFP_ATOMIC);
-
-	return;
 }
 
 /**
@@ -775,6 +771,7 @@ static int imon_probe(struct usb_interface *interface,
 		struct usb_endpoint_descriptor *ep;
 		int ep_dir;
 		int ep_type;
+
 		ep = &iface_desc->endpoint[i].desc;
 		ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
 		ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
diff --git a/drivers/staging/media/lirc/lirc_parallel.c b/drivers/staging/media/lirc/lirc_parallel.c
index 1394f020e46b..672858a089f3 100644
--- a/drivers/staging/media/lirc/lirc_parallel.c
+++ b/drivers/staging/media/lirc/lirc_parallel.c
@@ -169,23 +169,22 @@ static unsigned int init_lirc_timer(void)
 			newtimer = (1000000*count)/timeelapsed;
 			pr_info("%u Hz timer detected\n", newtimer);
 			return newtimer;
-		}  else {
-			newtimer = (1000000*count)/timeelapsed;
-			if (abs(newtimer - default_timer) > default_timer/10) {
-				/* bad timer */
-				pr_notice("bad timer: %u Hz\n", newtimer);
-				pr_notice("using default timer: %u Hz\n",
-					  default_timer);
-				return default_timer;
-			} else {
-				pr_info("%u Hz timer detected\n", newtimer);
-				return newtimer; /* use detected value */
-			}
 		}
-	} else {
-		pr_notice("no timer detected\n");
-		return 0;
+		newtimer = (1000000*count)/timeelapsed;
+		if (abs(newtimer - default_timer) > default_timer/10) {
+			/* bad timer */
+			pr_notice("bad timer: %u Hz\n", newtimer);
+			pr_notice("using default timer: %u Hz\n",
+				  default_timer);
+			return default_timer;
+		} else {
+			pr_info("%u Hz timer detected\n", newtimer);
+			return newtimer; /* use detected value */
+		}
 	}
+
+	pr_notice("no timer detected\n");
+	return 0;
 }
 
 static int lirc_claim(void)
@@ -661,7 +660,8 @@ static int __init lirc_parallel_init(void)
 		goto exit_device_put;
 	}
 	ppdevice = parport_register_device(pport, LIRC_DRIVER_NAME,
-					   pf, kf, lirc_lirc_irq_handler, 0, NULL);
+					   pf, kf, lirc_lirc_irq_handler, 0,
+					   NULL);
 	parport_put_port(pport);
 	if (ppdevice == NULL) {
 		pr_notice("parport_register_device() failed\n");
diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c
index efe561cd0935..bae0d467093e 100644
--- a/drivers/staging/media/lirc/lirc_serial.c
+++ b/drivers/staging/media/lirc/lirc_serial.c
@@ -782,7 +782,7 @@ static int lirc_serial_probe(struct platform_device *dev)
 {
 	int i, nlow, nhigh, result;
 
-	result = request_irq(irq, lirc_irq_handler,
+	result = devm_request_irq(&dev->dev, irq, lirc_irq_handler,
 			     (share_irq ? IRQF_SHARED : 0),
 			     LIRC_DRIVER_NAME, (void *)&hardware);
 	if (result < 0) {
@@ -800,22 +800,22 @@ static int lirc_serial_probe(struct platform_device *dev)
 	 * for the NSLU2 it's done in boot code.
 	 */
 	if (((iommap != 0)
-	     && (request_mem_region(iommap, 8 << ioshift,
-				    LIRC_DRIVER_NAME) == NULL))
+	     && (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
+					 LIRC_DRIVER_NAME) == NULL))
 	   || ((iommap == 0)
-	       && (request_region(io, 8, LIRC_DRIVER_NAME) == NULL))) {
+	       && (devm_request_region(&dev->dev, io, 8,
+				       LIRC_DRIVER_NAME) == NULL))) {
 		dev_err(&dev->dev, "port %04x already in use\n", io);
 		dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
 		dev_warn(&dev->dev,
 			 "or compile the serial port driver as module and\n");
 		dev_warn(&dev->dev, "make sure this module is loaded first\n");
-		result = -EBUSY;
-		goto exit_free_irq;
+		return -EBUSY;
 	}
 
 	result = hardware_init_port();
 	if (result < 0)
-		goto exit_release_region;
+		return result;
 
 	/* Initialize pulse/space widths */
 	init_timing_params(duty_cycle, freq);
@@ -847,28 +847,6 @@ static int lirc_serial_probe(struct platform_device *dev)
 
 	dprintk("Interrupt %d, port %04x obtained\n", irq, io);
 	return 0;
-
-exit_release_region:
-	if (iommap != 0)
-		release_mem_region(iommap, 8 << ioshift);
-	else
-		release_region(io, 8);
-exit_free_irq:
-	free_irq(irq, (void *)&hardware);
-
-	return result;
-}
-
-static int lirc_serial_remove(struct platform_device *dev)
-{
-	free_irq(irq, (void *)&hardware);
-
-	if (iommap != 0)
-		release_mem_region(iommap, 8 << ioshift);
-	else
-		release_region(io, 8);
-
-	return 0;
 }
 
 static int set_use_inc(void *data)
@@ -1081,7 +1059,6 @@ static int lirc_serial_resume(struct platform_device *dev)
 
 static struct platform_driver lirc_serial_driver = {
 	.probe		= lirc_serial_probe,
-	.remove		= lirc_serial_remove,
 	.suspend	= lirc_serial_suspend,
 	.resume		= lirc_serial_resume,
 	.driver		= {
diff --git a/drivers/staging/media/lirc/lirc_sir.c b/drivers/staging/media/lirc/lirc_sir.c
index e31cbb81f059..79da3adf1bd5 100644
--- a/drivers/staging/media/lirc/lirc_sir.c
+++ b/drivers/staging/media/lirc/lirc_sir.c
@@ -55,13 +55,6 @@
 #include <asm/irq.h>
 #include <linux/fcntl.h>
 #include <linux/platform_device.h>
-#ifdef LIRC_ON_SA1100
-#include <asm/hardware.h>
-#ifdef CONFIG_SA1100_COLLIE
-#include <asm/arch/tc35143.h>
-#include <asm/ucb1200.h>
-#endif
-#endif
 
 #include <linux/timer.h>
 
@@ -94,35 +87,6 @@ static void init_act200(void);
 static void init_act220(void);
 #endif
 
-/*** SA1100 ***/
-#ifdef LIRC_ON_SA1100
-struct sa1100_ser2_registers {
-	/* HSSP control register */
-	unsigned char hscr0;
-	/* UART registers */
-	unsigned char utcr0;
-	unsigned char utcr1;
-	unsigned char utcr2;
-	unsigned char utcr3;
-	unsigned char utcr4;
-	unsigned char utdr;
-	unsigned char utsr0;
-	unsigned char utsr1;
-} sr;
-
-static int irq = IRQ_Ser2ICP;
-
-#define LIRC_ON_SA1100_TRANSMITTER_LATENCY 0
-
-/* pulse/space ratio of 50/50 */
-static unsigned long pulse_width = (13-LIRC_ON_SA1100_TRANSMITTER_LATENCY);
-/* 1000000/freq-pulse_width */
-static unsigned long space_width = (13-LIRC_ON_SA1100_TRANSMITTER_LATENCY);
-static unsigned int freq = 38000;      /* modulation frequency */
-static unsigned int duty_cycle = 50;   /* duty cycle of 50% */
-
-#endif
-
 #define RBUF_LEN 1024
 #define WBUF_LEN 1024
 
@@ -205,17 +169,6 @@ static void drop_hardware(void);
 static int init_port(void);
 static void drop_port(void);
 
-#ifdef LIRC_ON_SA1100
-static void on(void)
-{
-	PPSR |= PPC_TXD2;
-}
-
-static void off(void)
-{
-	PPSR &= ~PPC_TXD2;
-}
-#else
 static inline unsigned int sinp(int offset)
 {
 	return inb(io + offset);
@@ -225,7 +178,6 @@ static inline void soutp(int offset, int value)
 {
 	outb(value, io + offset);
 }
-#endif
 
 #ifndef MAX_UDELAY_MS
 #define MAX_UDELAY_US 5000
@@ -305,10 +257,6 @@ static ssize_t lirc_write(struct file *file, const char __user *buf, size_t n,
 	if (IS_ERR(tx_buf))
 		return PTR_ERR(tx_buf);
 	i = 0;
-#ifdef LIRC_ON_SA1100
-	/* disable receiver */
-	Ser2UTCR3 = 0;
-#endif
 	local_irq_save(flags);
 	while (1) {
 		if (i >= count)
@@ -323,15 +271,6 @@ static ssize_t lirc_write(struct file *file, const char __user *buf, size_t n,
 		i++;
 	}
 	local_irq_restore(flags);
-#ifdef LIRC_ON_SA1100
-	off();
-	udelay(1000); /* wait 1ms for IR diode to recover */
-	Ser2UTCR3 = 0;
-	/* clear status register to prevent unwanted interrupts */
-	Ser2UTSR0 &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
-	/* enable receiver */
-	Ser2UTCR3 = UTCR3_RXE|UTCR3_RIE;
-#endif
 	kfree(tx_buf);
 	return count;
 }
@@ -341,25 +280,12 @@ static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
 	u32 __user *uptr = (u32 __user *)arg;
 	int retval = 0;
 	u32 value = 0;
-#ifdef LIRC_ON_SA1100
-
-	if (cmd == LIRC_GET_FEATURES)
-		value = LIRC_CAN_SEND_PULSE |
-			LIRC_CAN_SET_SEND_DUTY_CYCLE |
-			LIRC_CAN_SET_SEND_CARRIER |
-			LIRC_CAN_REC_MODE2;
-	else if (cmd == LIRC_GET_SEND_MODE)
-		value = LIRC_MODE_PULSE;
-	else if (cmd == LIRC_GET_REC_MODE)
-		value = LIRC_MODE_MODE2;
-#else
 	if (cmd == LIRC_GET_FEATURES)
 		value = LIRC_CAN_SEND_PULSE | LIRC_CAN_REC_MODE2;
 	else if (cmd == LIRC_GET_SEND_MODE)
 		value = LIRC_MODE_PULSE;
 	else if (cmd == LIRC_GET_REC_MODE)
 		value = LIRC_MODE_MODE2;
-#endif
 
 	switch (cmd) {
 	case LIRC_GET_FEATURES:
@@ -372,37 +298,6 @@ static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
 	case LIRC_SET_REC_MODE:
 		retval = get_user(value, uptr);
 		break;
-#ifdef LIRC_ON_SA1100
-	case LIRC_SET_SEND_DUTY_CYCLE:
-		retval = get_user(value, uptr);
-		if (retval)
-			return retval;
-		if (value <= 0 || value > 100)
-			return -EINVAL;
-		/* (value/100)*(1000000/freq) */
-		duty_cycle = value;
-		pulse_width = (unsigned long) duty_cycle*10000/freq;
-		space_width = (unsigned long) 1000000L/freq-pulse_width;
-		if (pulse_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY)
-			pulse_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY;
-		if (space_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY)
-			space_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY;
-		break;
-	case LIRC_SET_SEND_CARRIER:
-		retval = get_user(value, uptr);
-		if (retval)
-			return retval;
-		if (value > 500000 || value < 20000)
-			return -EINVAL;
-		freq = value;
-		pulse_width = (unsigned long) duty_cycle*10000/freq;
-		space_width = (unsigned long) 1000000L/freq-pulse_width;
-		if (pulse_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY)
-			pulse_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY;
-		if (space_width >= LIRC_ON_SA1100_TRANSMITTER_LATENCY)
-			space_width -= LIRC_ON_SA1100_TRANSMITTER_LATENCY;
-		break;
-#endif
 	default:
 		retval = -ENOIOCTLCMD;
 
@@ -539,10 +434,8 @@ static void sir_timeout(unsigned long data)
 	/* avoid interference with interrupt */
 	spin_lock_irqsave(&timer_lock, flags);
 	if (last_value) {
-#ifndef LIRC_ON_SA1100
 		/* clear unread bits in UART and restart */
 		outb(UART_FCR_CLEAR_RCVR, io + UART_FCR);
-#endif
 		/* determine 'virtual' pulse end: */
 		pulse_end = delta(&last_tv, &last_intr_tv);
 		dprintk("timeout add %d for %lu usec\n", last_value, pulse_end);
@@ -558,62 +451,6 @@ static irqreturn_t sir_interrupt(int irq, void *dev_id)
 	unsigned char data;
 	struct timeval curr_tv;
 	static unsigned long deltv;
-#ifdef LIRC_ON_SA1100
-	int status;
-	static int n;
-
-	status = Ser2UTSR0;
-	/*
-	 * Deal with any receive errors first.  The bytes in error may be
-	 * the only bytes in the receive FIFO, so we do this first.
-	 */
-	while (status & UTSR0_EIF) {
-		int bstat;
-
-		if (debug) {
-			dprintk("EIF\n");
-			bstat = Ser2UTSR1;
-
-			if (bstat & UTSR1_FRE)
-				dprintk("frame error\n");
-			if (bstat & UTSR1_ROR)
-				dprintk("receive fifo overrun\n");
-			if (bstat & UTSR1_PRE)
-				dprintk("parity error\n");
-		}
-
-		bstat = Ser2UTDR;
-		n++;
-		status = Ser2UTSR0;
-	}
-
-	if (status & (UTSR0_RFS | UTSR0_RID)) {
-		do_gettimeofday(&curr_tv);
-		deltv = delta(&last_tv, &curr_tv);
-		do {
-			data = Ser2UTDR;
-			dprintk("%d data: %u\n", n, (unsigned int) data);
-			n++;
-		} while (status & UTSR0_RID && /* do not empty fifo in order to
-						* get UTSR0_RID in any case */
-		      Ser2UTSR1 & UTSR1_RNE); /* data ready */
-
-		if (status&UTSR0_RID) {
-			add_read_queue(0 , deltv - n * TIME_CONST); /*space*/
-			add_read_queue(1, n * TIME_CONST); /*pulse*/
-			n = 0;
-			last_tv = curr_tv;
-		}
-	}
-
-	if (status & UTSR0_TFS)
-		pr_err("transmit fifo not full, shouldn't happen\n");
-
-	/* We must clear certain bits. */
-	status &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
-	if (status)
-		Ser2UTSR0 = status;
-#else
 	unsigned long deltintrtv;
 	unsigned long flags;
 	int iir, lsr;
@@ -698,44 +535,9 @@ static irqreturn_t sir_interrupt(int irq, void *dev_id)
 			break;
 		}
 	}
-#endif
 	return IRQ_RETVAL(IRQ_HANDLED);
 }
 
-#ifdef LIRC_ON_SA1100
-static void send_pulse(unsigned long length)
-{
-	unsigned long k, delay;
-	int flag;
-
-	if (length == 0)
-		return;
-	/*
-	 * this won't give us the carrier frequency we really want
-	 * due to integer arithmetic, but we can accept this inaccuracy
-	 */
-
-	for (k = flag = 0; k < length; k += delay, flag = !flag) {
-		if (flag) {
-			off();
-			delay = space_width;
-		} else {
-			on();
-			delay = pulse_width;
-		}
-		safe_udelay(delay);
-	}
-	off();
-}
-
-static void send_space(unsigned long length)
-{
-	if (length == 0)
-		return;
-	off();
-	safe_udelay(length);
-}
-#else
 static void send_space(unsigned long len)
 {
 	safe_udelay(len);
@@ -755,31 +557,6 @@ static void send_pulse(unsigned long len)
 			;
 	}
 }
-#endif
-
-#ifdef CONFIG_SA1100_COLLIE
-static int sa1100_irda_set_power_collie(int state)
-{
-	if (state) {
-		/*
-		 *  0 - off
-		 *  1 - short range, lowest power
-		 *  2 - medium range, medium power
-		 *  3 - maximum range, high power
-		 */
-		ucb1200_set_io_direction(TC35143_GPIO_IR_ON,
-					 TC35143_IODIR_OUTPUT);
-		ucb1200_set_io(TC35143_GPIO_IR_ON, TC35143_IODAT_LOW);
-		udelay(100);
-	} else {
-		/* OFF */
-		ucb1200_set_io_direction(TC35143_GPIO_IR_ON,
-					 TC35143_IODIR_OUTPUT);
-		ucb1200_set_io(TC35143_GPIO_IR_ON, TC35143_IODAT_HIGH);
-	}
-	return 0;
-}
-#endif
 
 static int init_hardware(void)
 {
@@ -787,51 +564,7 @@ static int init_hardware(void)
 
 	spin_lock_irqsave(&hardware_lock, flags);
 	/* reset UART */
-#ifdef LIRC_ON_SA1100
-#ifdef CONFIG_SA1100_COLLIE
-	sa1100_irda_set_power_collie(3);	/* power on */
-#endif
-	sr.hscr0 = Ser2HSCR0;
-
-	sr.utcr0 = Ser2UTCR0;
-	sr.utcr1 = Ser2UTCR1;
-	sr.utcr2 = Ser2UTCR2;
-	sr.utcr3 = Ser2UTCR3;
-	sr.utcr4 = Ser2UTCR4;
-
-	sr.utdr = Ser2UTDR;
-	sr.utsr0 = Ser2UTSR0;
-	sr.utsr1 = Ser2UTSR1;
-
-	/* configure GPIO */
-	/* output */
-	PPDR |= PPC_TXD2;
-	PSDR |= PPC_TXD2;
-	/* set output to 0 */
-	off();
-
-	/* Enable HP-SIR modulation, and ensure that the port is disabled. */
-	Ser2UTCR3 = 0;
-	Ser2HSCR0 = sr.hscr0 & (~HSCR0_HSSP);
-
-	/* clear status register to prevent unwanted interrupts */
-	Ser2UTSR0 &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
-
-	/* 7N1 */
-	Ser2UTCR0 = UTCR0_1StpBit|UTCR0_7BitData;
-	/* 115200 */
-	Ser2UTCR1 = 0;
-	Ser2UTCR2 = 1;
-	/* use HPSIR, 1.6 usec pulses */
-	Ser2UTCR4 = UTCR4_HPSIR|UTCR4_Z1_6us;
-
-	/* enable receiver, receive fifo interrupt */
-	Ser2UTCR3 = UTCR3_RXE|UTCR3_RIE;
-
-	/* clear status register to prevent unwanted interrupts */
-	Ser2UTSR0 &= (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
-
-#elif defined(LIRC_SIR_TEKRAM)
+#if defined(LIRC_SIR_TEKRAM)
 	/* disable FIFO */
 	soutp(UART_FCR,
 	      UART_FCR_CLEAR_RCVR|
@@ -927,23 +660,9 @@ static void drop_hardware(void)
 
 	spin_lock_irqsave(&hardware_lock, flags);
 
-#ifdef LIRC_ON_SA1100
-	Ser2UTCR3 = 0;
-
-	Ser2UTCR0 = sr.utcr0;
-	Ser2UTCR1 = sr.utcr1;
-	Ser2UTCR2 = sr.utcr2;
-	Ser2UTCR4 = sr.utcr4;
-	Ser2UTCR3 = sr.utcr3;
-
-	Ser2HSCR0 = sr.hscr0;
-#ifdef CONFIG_SA1100_COLLIE
-	sa1100_irda_set_power_collie(0);	/* power off */
-#endif
-#else
 	/* turn off interrupts */
 	outb(0, io + UART_IER);
-#endif
+
 	spin_unlock_irqrestore(&hardware_lock, flags);
 }
 
@@ -954,24 +673,18 @@ static int init_port(void)
 	int retval;
 
 	/* get I/O port access and IRQ line */
-#ifndef LIRC_ON_SA1100
 	if (request_region(io, 8, LIRC_DRIVER_NAME) == NULL) {
 		pr_err("i/o port 0x%.4x already in use.\n", io);
 		return -EBUSY;
 	}
-#endif
 	retval = request_irq(irq, sir_interrupt, 0,
 			     LIRC_DRIVER_NAME, NULL);
 	if (retval < 0) {
-#               ifndef LIRC_ON_SA1100
 		release_region(io, 8);
-#               endif
 		pr_err("IRQ %d already in use.\n", irq);
 		return retval;
 	}
-#ifndef LIRC_ON_SA1100
 	pr_info("I/O port 0x%.4x, IRQ %d.\n", io, irq);
-#endif
 
 	init_timer(&timerlist);
 	timerlist.function = sir_timeout;
@@ -984,9 +697,7 @@ static void drop_port(void)
 {
 	free_irq(irq, NULL);
 	del_timer_sync(&timerlist);
-#ifndef LIRC_ON_SA1100
 	release_region(io, 8);
-#endif
 }
 
 #ifdef LIRC_SIR_ACTISYS_ACT200L
@@ -1284,9 +995,6 @@ module_exit(lirc_sir_exit);
 #ifdef LIRC_SIR_TEKRAM
 MODULE_DESCRIPTION("Infrared receiver driver for Tekram Irmate 210");
 MODULE_AUTHOR("Christoph Bartelmus");
-#elif defined(LIRC_ON_SA1100)
-MODULE_DESCRIPTION("LIRC driver for StrongARM SA1100 embedded microprocessor");
-MODULE_AUTHOR("Christoph Bartelmus");
 #elif defined(LIRC_SIR_ACTISYS_ACT200L)
 MODULE_DESCRIPTION("LIRC driver for Actisys Act200L");
 MODULE_AUTHOR("Karl Bongers");
@@ -1299,10 +1007,6 @@ MODULE_AUTHOR("Milan Pikula");
 #endif
 MODULE_LICENSE("GPL");
 
-#ifdef LIRC_ON_SA1100
-module_param(irq, int, S_IRUGO);
-MODULE_PARM_DESC(irq, "Interrupt (16)");
-#else
 module_param(io, int, S_IRUGO);
 MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)");
 
@@ -1311,7 +1015,6 @@ MODULE_PARM_DESC(irq, "Interrupt (4 or 3)");
 
 module_param(threshold, int, S_IRUGO);
 MODULE_PARM_DESC(threshold, "space detection threshold (3)");
-#endif
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Enable debugging messages");