diff options
Diffstat (limited to 'drivers/staging/msm/mdp_vsync.c')
-rw-r--r-- | drivers/staging/msm/mdp_vsync.c | 389 |
1 files changed, 389 insertions, 0 deletions
diff --git a/drivers/staging/msm/mdp_vsync.c b/drivers/staging/msm/mdp_vsync.c new file mode 100644 index 000000000000..bbd456044356 --- /dev/null +++ b/drivers/staging/msm/mdp_vsync.c @@ -0,0 +1,389 @@ +/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/time.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/hrtimer.h> +#include <linux/vmalloc.h> +#include <linux/clk.h> + +#include <mach/hardware.h> +#include <linux/io.h> + +#include <asm/system.h> +#include <asm/mach-types.h> +#include <linux/semaphore.h> +#include <linux/uaccess.h> +#include <mach/gpio.h> + +#include "mdp.h" +#include "msm_fb.h" +#include "mddihost.h" + +#ifdef CONFIG_FB_MSM_MDP40 +#define MDP_SYNC_CFG_0 0x100 +#define MDP_SYNC_STATUS_0 0x10c +#define MDP_PRIM_VSYNC_OUT_CTRL 0x118 +#define MDP_PRIM_VSYNC_INIT_VAL 0x128 +#else +#define MDP_SYNC_CFG_0 0x300 +#define MDP_SYNC_STATUS_0 0x30c +#define MDP_PRIM_VSYNC_OUT_CTRL 0x318 +#define MDP_PRIM_VSYNC_INIT_VAL 0x328 +#endif + +extern mddi_lcd_type mddi_lcd_idx; +extern spinlock_t mdp_spin_lock; +extern struct workqueue_struct *mdp_vsync_wq; +extern int lcdc_mode; +extern int vsync_mode; + +#ifdef MDP_HW_VSYNC +int vsync_above_th = 4; +int vsync_start_th = 1; +int vsync_load_cnt; + +struct clk *mdp_vsync_clk; + +void mdp_hw_vsync_clk_enable(struct msm_fb_data_type *mfd) +{ + if (mfd->use_mdp_vsync) + clk_enable(mdp_vsync_clk); +} + +void mdp_hw_vsync_clk_disable(struct msm_fb_data_type *mfd) +{ + if (mfd->use_mdp_vsync) + clk_disable(mdp_vsync_clk); +} +#endif + +static void mdp_set_vsync(unsigned long data) +{ + struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data; + struct msm_fb_panel_data *pdata = NULL; + + pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data; + + if ((pdata) && (pdata->set_vsync_notifier == NULL)) + return; + + init_timer(&mfd->vsync_resync_timer); + mfd->vsync_resync_timer.function = mdp_set_vsync; + mfd->vsync_resync_timer.data = data; + mfd->vsync_resync_timer.expires = + jiffies + mfd->panel_info.lcd.vsync_notifier_period; + add_timer(&mfd->vsync_resync_timer); + + if ((mfd->panel_info.lcd.vsync_enable) && (mfd->panel_power_on) + && (!mfd->vsync_handler_pending)) { + mfd->vsync_handler_pending = TRUE; + if (!queue_work(mdp_vsync_wq, &mfd->vsync_resync_worker)) { + MSM_FB_INFO + ("mdp_set_vsync: can't queue_work! -> needs to increase vsync_resync_timer_duration\n"); + } + } else { + MSM_FB_DEBUG + ("mdp_set_vsync failed! EN:%d PWR:%d PENDING:%d\n", + mfd->panel_info.lcd.vsync_enable, mfd->panel_power_on, + mfd->vsync_handler_pending); + } +} + +static void mdp_vsync_handler(void *data) +{ + struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data; + + if (mfd->use_mdp_vsync) { +#ifdef MDP_HW_VSYNC + if (mfd->panel_power_on) + MDP_OUTP(MDP_BASE + MDP_SYNC_STATUS_0, vsync_load_cnt); + + mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, TRUE); +#endif + } else { + mfd->last_vsync_timetick = ktime_get_real(); + } + + mfd->vsync_handler_pending = FALSE; +} + +irqreturn_t mdp_hw_vsync_handler_proxy(int irq, void *data) +{ + /* + * ToDo: tried enabling/disabling GPIO MDP HW VSYNC interrupt + * but getting inaccurate timing in mdp_vsync_handler() + * disable_irq(MDP_HW_VSYNC_IRQ); + */ + mdp_vsync_handler(data); + + return IRQ_HANDLED; +} + +#ifdef MDP_HW_VSYNC +static void mdp_set_sync_cfg_0(struct msm_fb_data_type *mfd, int vsync_cnt) +{ + unsigned long cfg; + + cfg = mfd->total_lcd_lines - 1; + cfg <<= MDP_SYNCFG_HGT_LOC; + if (mfd->panel_info.lcd.hw_vsync_mode) + cfg |= MDP_SYNCFG_VSYNC_EXT_EN; + cfg |= (MDP_SYNCFG_VSYNC_INT_EN | vsync_cnt); + + MDP_OUTP(MDP_BASE + MDP_SYNC_CFG_0, cfg); +} +#endif + +void mdp_config_vsync(struct msm_fb_data_type *mfd) +{ + + /* vsync on primary lcd only for now */ + if ((mfd->dest != DISPLAY_LCD) || (mfd->panel_info.pdest != DISPLAY_1) + || (!vsync_mode)) { + goto err_handle; + } + + if (mfd->panel_info.lcd.vsync_enable) { + mfd->total_porch_lines = mfd->panel_info.lcd.v_back_porch + + mfd->panel_info.lcd.v_front_porch + + mfd->panel_info.lcd.v_pulse_width; + mfd->total_lcd_lines = + mfd->panel_info.yres + mfd->total_porch_lines; + mfd->lcd_ref_usec_time = + 100000000 / mfd->panel_info.lcd.refx100; + mfd->vsync_handler_pending = FALSE; + mfd->last_vsync_timetick.tv.sec = 0; + mfd->last_vsync_timetick.tv.nsec = 0; + +#ifdef MDP_HW_VSYNC + if (mdp_vsync_clk == NULL) + mdp_vsync_clk = clk_get(NULL, "mdp_vsync_clk"); + + if (IS_ERR(mdp_vsync_clk)) { + printk(KERN_ERR "error: can't get mdp_vsync_clk!\n"); + mfd->use_mdp_vsync = 0; + } else + mfd->use_mdp_vsync = 1; + + if (mfd->use_mdp_vsync) { + uint32 vsync_cnt_cfg, vsync_cnt_cfg_dem; + uint32 mdp_vsync_clk_speed_hz; + + mdp_vsync_clk_speed_hz = clk_get_rate(mdp_vsync_clk); + + if (mdp_vsync_clk_speed_hz == 0) { + mfd->use_mdp_vsync = 0; + } else { + /* + * Do this calculation in 2 steps for + * rounding uint32 properly. + */ + vsync_cnt_cfg_dem = + (mfd->panel_info.lcd.refx100 * + mfd->total_lcd_lines) / 100; + vsync_cnt_cfg = + (mdp_vsync_clk_speed_hz) / + vsync_cnt_cfg_dem; + + /* MDP cmd block enable */ + mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, + FALSE); + mdp_hw_vsync_clk_enable(mfd); + + mdp_set_sync_cfg_0(mfd, vsync_cnt_cfg); + + /* + * load the last line + 1 to be in the + * safety zone + */ + vsync_load_cnt = mfd->panel_info.yres; + + /* line counter init value at the next pulse */ + MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_INIT_VAL, + vsync_load_cnt); + + /* + * external vsync source pulse width and + * polarity flip + */ + MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_OUT_CTRL, + BIT(30) | BIT(0)); + + + /* threshold */ + MDP_OUTP(MDP_BASE + 0x200, + (vsync_above_th << 16) | + (vsync_start_th)); + + mdp_hw_vsync_clk_disable(mfd); + /* MDP cmd block disable */ + mdp_pipe_ctrl(MDP_CMD_BLOCK, + MDP_BLOCK_POWER_OFF, FALSE); + } + } +#else + mfd->use_mdp_vsync = 0; + hrtimer_init(&mfd->dma_hrtimer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + mfd->dma_hrtimer.function = mdp_dma2_vsync_hrtimer_handler; + mfd->vsync_width_boundary = vmalloc(mfd->panel_info.xres * 4); +#endif + + mfd->channel_irq = 0; + if (mfd->panel_info.lcd.hw_vsync_mode) { + u32 vsync_gpio = mfd->vsync_gpio; + u32 ret; + + if (vsync_gpio == -1) { + MSM_FB_INFO("vsync_gpio not defined!\n"); + goto err_handle; + } + + ret = gpio_tlmm_config(GPIO_CFG + (vsync_gpio, + (mfd->use_mdp_vsync) ? 1 : 0, + GPIO_INPUT, + GPIO_PULL_DOWN, + GPIO_2MA), + GPIO_ENABLE); + if (ret) + goto err_handle; + + if (!mfd->use_mdp_vsync) { + mfd->channel_irq = MSM_GPIO_TO_INT(vsync_gpio); + if (request_irq + (mfd->channel_irq, + &mdp_hw_vsync_handler_proxy, + IRQF_TRIGGER_FALLING, "VSYNC_GPIO", + (void *)mfd)) { + MSM_FB_INFO + ("irq=%d failed! vsync_gpio=%d\n", + mfd->channel_irq, + vsync_gpio); + goto err_handle; + } + } + } + + mdp_set_vsync((unsigned long)mfd); + } + + return; + +err_handle: + if (mfd->vsync_width_boundary) + vfree(mfd->vsync_width_boundary); + mfd->panel_info.lcd.vsync_enable = FALSE; + printk(KERN_ERR "%s: failed!\n", __func__); +} + +void mdp_vsync_resync_workqueue_handler(struct work_struct *work) +{ + struct msm_fb_data_type *mfd = NULL; + int vsync_fnc_enabled = FALSE; + struct msm_fb_panel_data *pdata = NULL; + + mfd = container_of(work, struct msm_fb_data_type, vsync_resync_worker); + + if (mfd) { + if (mfd->panel_power_on) { + pdata = + (struct msm_fb_panel_data *)mfd->pdev->dev. + platform_data; + + /* + * we need to turn on MDP power if it uses MDP vsync + * HW block in SW mode + */ + if ((!mfd->panel_info.lcd.hw_vsync_mode) && + (mfd->use_mdp_vsync) && + (pdata) && (pdata->set_vsync_notifier != NULL)) { + /* + * enable pwr here since we can't enable it in + * vsync callback in isr mode + */ + mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, + FALSE); + } + + if (pdata->set_vsync_notifier != NULL) { + vsync_fnc_enabled = TRUE; + pdata->set_vsync_notifier(mdp_vsync_handler, + (void *)mfd); + } + } + } + + if ((mfd) && (!vsync_fnc_enabled)) + mfd->vsync_handler_pending = FALSE; +} + +boolean mdp_hw_vsync_set_handler(msm_fb_vsync_handler_type handler, void *data) +{ + /* + * ToDo: tried enabling/disabling GPIO MDP HW VSYNC interrupt + * but getting inaccurate timing in mdp_vsync_handler() + * enable_irq(MDP_HW_VSYNC_IRQ); + */ + + return TRUE; +} + +uint32 mdp_get_lcd_line_counter(struct msm_fb_data_type *mfd) +{ + uint32 elapsed_usec_time; + uint32 lcd_line; + ktime_t last_vsync_timetick_local; + ktime_t curr_time; + unsigned long flag; + + if ((!mfd->panel_info.lcd.vsync_enable) || (!vsync_mode)) + return 0; + + spin_lock_irqsave(&mdp_spin_lock, flag); + last_vsync_timetick_local = mfd->last_vsync_timetick; + spin_unlock_irqrestore(&mdp_spin_lock, flag); + + curr_time = ktime_get_real(); + elapsed_usec_time = + ((curr_time.tv.sec - last_vsync_timetick_local.tv.sec) * 1000000) + + ((curr_time.tv.nsec - last_vsync_timetick_local.tv.nsec) / 1000); + + elapsed_usec_time = elapsed_usec_time % mfd->lcd_ref_usec_time; + + /* lcd line calculation referencing to line counter = 0 */ + lcd_line = + (elapsed_usec_time * mfd->total_lcd_lines) / mfd->lcd_ref_usec_time; + + /* lcd line adjusment referencing to the actual line counter at vsync */ + lcd_line = + (mfd->total_lcd_lines - mfd->panel_info.lcd.v_back_porch + + lcd_line) % (mfd->total_lcd_lines + 1); + + if (lcd_line > mfd->total_lcd_lines) { + MSM_FB_INFO + ("mdp_get_lcd_line_counter: mdp_lcd_rd_cnt >= mfd->total_lcd_lines error!\n"); + } + + return lcd_line; +} |