diff options
Diffstat (limited to 'drivers/staging/net')
-rw-r--r-- | drivers/staging/net/Kconfig | 38 | ||||
-rw-r--r-- | drivers/staging/net/Makefile | 5 | ||||
-rw-r--r-- | drivers/staging/net/TODO | 5 | ||||
-rw-r--r-- | drivers/staging/net/pc300-falc-lh.h | 1238 | ||||
-rw-r--r-- | drivers/staging/net/pc300.h | 436 | ||||
-rw-r--r-- | drivers/staging/net/pc300_drv.c | 3670 | ||||
-rw-r--r-- | drivers/staging/net/pc300_tty.c | 1079 |
7 files changed, 6471 insertions, 0 deletions
diff --git a/drivers/staging/net/Kconfig b/drivers/staging/net/Kconfig new file mode 100644 index 000000000000..a64e56b1898a --- /dev/null +++ b/drivers/staging/net/Kconfig @@ -0,0 +1,38 @@ +if NETDEVICES + +if WAN + +config PC300 + tristate "Cyclades-PC300 support (RS-232/V.35, X.21, T1/E1 boards)" + depends on HDLC && PCI && BROKEN + ---help--- + This driver is broken because of struct tty_driver change. + + Driver for the Cyclades-PC300 synchronous communication boards. + + These boards provide synchronous serial interfaces to your + Linux box (interfaces currently available are RS-232/V.35, X.21 and + T1/E1). If you wish to support Multilink PPP, please select the + option later and read the file README.mlppp provided by PC300 + package. + + To compile this as a module, choose M here: the module + will be called pc300. + + If unsure, say N. + +config PC300_MLPPP + bool "Cyclades-PC300 MLPPP support" + depends on PC300 && PPP_MULTILINK && PPP_SYNC_TTY && HDLC_PPP + help + Multilink PPP over the PC300 synchronous communication boards. + +comment "Cyclades-PC300 MLPPP support is disabled." + depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP) + +comment "Refer to the file README.mlppp, provided by PC300 package." + depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP) + +endif # WAN + +endif # NETDEVICES diff --git a/drivers/staging/net/Makefile b/drivers/staging/net/Makefile new file mode 100644 index 000000000000..0799c43d5114 --- /dev/null +++ b/drivers/staging/net/Makefile @@ -0,0 +1,5 @@ +pc300-y := pc300_drv.o +pc300-$(CONFIG_PC300_MLPPP) += pc300_tty.o +pc300-objs := $(pc300-y) + +obj-$(CONFIG_PC300) += pc300.o diff --git a/drivers/staging/net/TODO b/drivers/staging/net/TODO new file mode 100644 index 000000000000..e3446f2ad7c7 --- /dev/null +++ b/drivers/staging/net/TODO @@ -0,0 +1,5 @@ +PC300 +The driver is very broken and cannot work with the current TTY layer. It is +inevitable to convert it to the new TTY API. + +If no one steps in to adopt the driver, it will be removed in the 3.7 release. diff --git a/drivers/staging/net/pc300-falc-lh.h b/drivers/staging/net/pc300-falc-lh.h new file mode 100644 index 000000000000..01ed23ca76c7 --- /dev/null +++ b/drivers/staging/net/pc300-falc-lh.h @@ -0,0 +1,1238 @@ +/* + * falc.h Description of the Siemens FALC T1/E1 framer. + * + * Author: Ivan Passos <ivan@cyclades.com> + * + * Copyright: (c) 2000-2001 Cyclades Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * $Log: falc-lh.h,v $ + * Revision 3.1 2001/06/15 12:41:10 regina + * upping major version number + * + * Revision 1.1.1.1 2001/06/13 20:24:47 daniela + * PC300 initial CVS version (3.4.0-pre1) + * + * Revision 1.1 2000/05/15 ivan + * Included DJA bits for the LIM2 register. + * + * Revision 1.0 2000/02/22 ivan + * Initial version. + * + */ + +#ifndef _FALC_LH_H +#define _FALC_LH_H + +#define NUM_OF_T1_CHANNELS 24 +#define NUM_OF_E1_CHANNELS 32 + +/*>>>>>>>>>>>>>>>>> FALC Register Bits (Transmit Mode) <<<<<<<<<<<<<<<<<<< */ + +/* CMDR (Command Register) + ---------------- E1 & T1 ------------------------------ */ +#define CMDR_RMC 0x80 +#define CMDR_RRES 0x40 +#define CMDR_XREP 0x20 +#define CMDR_XRES 0x10 +#define CMDR_XHF 0x08 +#define CMDR_XTF 0x04 +#define CMDR_XME 0x02 +#define CMDR_SRES 0x01 + +/* MODE (Mode Register) + ----------------- E1 & T1 ----------------------------- */ +#define MODE_MDS2 0x80 +#define MODE_MDS1 0x40 +#define MODE_MDS0 0x20 +#define MODE_BRAC 0x10 +#define MODE_HRAC 0x08 + +/* IPC (Interrupt Port Configuration) + ----------------- E1 & T1 ----------------------------- */ +#define IPC_VIS 0x80 +#define IPC_SCI 0x04 +#define IPC_IC1 0x02 +#define IPC_IC0 0x01 + +/* CCR1 (Common Configuration Register 1) + ----------------- E1 & T1 ----------------------------- */ +#define CCR1_SFLG 0x80 +#define CCR1_XTS16RA 0x40 +#define CCR1_BRM 0x40 +#define CCR1_CASSYM 0x20 +#define CCR1_EDLX 0x20 +#define CCR1_EITS 0x10 +#define CCR1_ITF 0x08 +#define CCR1_RFT1 0x02 +#define CCR1_RFT0 0x01 + +/* CCR3 (Common Configuration Register 3) + ---------------- E1 & T1 ------------------------------ */ + +#define CCR3_PRE1 0x80 +#define CCR3_PRE0 0x40 +#define CCR3_EPT 0x20 +#define CCR3_RADD 0x10 +#define CCR3_RCRC 0x04 +#define CCR3_XCRC 0x02 + + +/* RTR1-4 (Receive Timeslot Register 1-4) + ---------------- E1 & T1 ------------------------------ */ + +#define RTR1_TS0 0x80 +#define RTR1_TS1 0x40 +#define RTR1_TS2 0x20 +#define RTR1_TS3 0x10 +#define RTR1_TS4 0x08 +#define RTR1_TS5 0x04 +#define RTR1_TS6 0x02 +#define RTR1_TS7 0x01 + +#define RTR2_TS8 0x80 +#define RTR2_TS9 0x40 +#define RTR2_TS10 0x20 +#define RTR2_TS11 0x10 +#define RTR2_TS12 0x08 +#define RTR2_TS13 0x04 +#define RTR2_TS14 0x02 +#define RTR2_TS15 0x01 + +#define RTR3_TS16 0x80 +#define RTR3_TS17 0x40 +#define RTR3_TS18 0x20 +#define RTR3_TS19 0x10 +#define RTR3_TS20 0x08 +#define RTR3_TS21 0x04 +#define RTR3_TS22 0x02 +#define RTR3_TS23 0x01 + +#define RTR4_TS24 0x80 +#define RTR4_TS25 0x40 +#define RTR4_TS26 0x20 +#define RTR4_TS27 0x10 +#define RTR4_TS28 0x08 +#define RTR4_TS29 0x04 +#define RTR4_TS30 0x02 +#define RTR4_TS31 0x01 + + +/* TTR1-4 (Transmit Timeslot Register 1-4) + ---------------- E1 & T1 ------------------------------ */ + +#define TTR1_TS0 0x80 +#define TTR1_TS1 0x40 +#define TTR1_TS2 0x20 +#define TTR1_TS3 0x10 +#define TTR1_TS4 0x08 +#define TTR1_TS5 0x04 +#define TTR1_TS6 0x02 +#define TTR1_TS7 0x01 + +#define TTR2_TS8 0x80 +#define TTR2_TS9 0x40 +#define TTR2_TS10 0x20 +#define TTR2_TS11 0x10 +#define TTR2_TS12 0x08 +#define TTR2_TS13 0x04 +#define TTR2_TS14 0x02 +#define TTR2_TS15 0x01 + +#define TTR3_TS16 0x80 +#define TTR3_TS17 0x40 +#define TTR3_TS18 0x20 +#define TTR3_TS19 0x10 +#define TTR3_TS20 0x08 +#define TTR3_TS21 0x04 +#define TTR3_TS22 0x02 +#define TTR3_TS23 0x01 + +#define TTR4_TS24 0x80 +#define TTR4_TS25 0x40 +#define TTR4_TS26 0x20 +#define TTR4_TS27 0x10 +#define TTR4_TS28 0x08 +#define TTR4_TS29 0x04 +#define TTR4_TS30 0x02 +#define TTR4_TS31 0x01 + + + +/* IMR0-4 (Interrupt Mask Register 0-4) + + ----------------- E1 & T1 ----------------------------- */ + +#define IMR0_RME 0x80 +#define IMR0_RFS 0x40 +#define IMR0_T8MS 0x20 +#define IMR0_ISF 0x20 +#define IMR0_RMB 0x10 +#define IMR0_CASC 0x08 +#define IMR0_RSC 0x08 +#define IMR0_CRC6 0x04 +#define IMR0_CRC4 0x04 +#define IMR0_PDEN 0x02 +#define IMR0_RPF 0x01 + +#define IMR1_CASE 0x80 +#define IMR1_RDO 0x40 +#define IMR1_ALLS 0x20 +#define IMR1_XDU 0x10 +#define IMR1_XMB 0x08 +#define IMR1_XLSC 0x02 +#define IMR1_XPR 0x01 +#define IMR1_LLBSC 0x80 + +#define IMR2_FAR 0x80 +#define IMR2_LFA 0x40 +#define IMR2_MFAR 0x20 +#define IMR2_T400MS 0x10 +#define IMR2_LMFA 0x10 +#define IMR2_AIS 0x08 +#define IMR2_LOS 0x04 +#define IMR2_RAR 0x02 +#define IMR2_RA 0x01 + +#define IMR3_ES 0x80 +#define IMR3_SEC 0x40 +#define IMR3_LMFA16 0x20 +#define IMR3_AIS16 0x10 +#define IMR3_RA16 0x08 +#define IMR3_API 0x04 +#define IMR3_XSLP 0x20 +#define IMR3_XSLN 0x10 +#define IMR3_LLBSC 0x08 +#define IMR3_XRS 0x04 +#define IMR3_SLN 0x02 +#define IMR3_SLP 0x01 + +#define IMR4_LFA 0x80 +#define IMR4_FER 0x40 +#define IMR4_CER 0x20 +#define IMR4_AIS 0x10 +#define IMR4_LOS 0x08 +#define IMR4_CVE 0x04 +#define IMR4_SLIP 0x02 +#define IMR4_EBE 0x01 + +/* FMR0-5 for E1 and T1 (Framer Mode Register ) */ + +#define FMR0_XC1 0x80 +#define FMR0_XC0 0x40 +#define FMR0_RC1 0x20 +#define FMR0_RC0 0x10 +#define FMR0_EXTD 0x08 +#define FMR0_ALM 0x04 +#define E1_FMR0_FRS 0x02 +#define T1_FMR0_FRS 0x08 +#define FMR0_SRAF 0x04 +#define FMR0_EXLS 0x02 +#define FMR0_SIM 0x01 + +#define FMR1_MFCS 0x80 +#define FMR1_AFR 0x40 +#define FMR1_ENSA 0x20 +#define FMR1_CTM 0x80 +#define FMR1_SIGM 0x40 +#define FMR1_EDL 0x20 +#define FMR1_PMOD 0x10 +#define FMR1_XFS 0x08 +#define FMR1_CRC 0x08 +#define FMR1_ECM 0x04 +#define FMR1_IMOD 0x02 +#define FMR1_XAIS 0x01 + +#define FMR2_RFS1 0x80 +#define FMR2_RFS0 0x40 +#define FMR2_MCSP 0x40 +#define FMR2_RTM 0x20 +#define FMR2_SSP 0x20 +#define FMR2_DAIS 0x10 +#define FMR2_SAIS 0x08 +#define FMR2_PLB 0x04 +#define FMR2_AXRA 0x02 +#define FMR2_ALMF 0x01 +#define FMR2_EXZE 0x01 + +#define LOOP_RTM 0x40 +#define LOOP_SFM 0x40 +#define LOOP_ECLB 0x20 +#define LOOP_CLA 0x1f + +/*--------------------- E1 ----------------------------*/ +#define FMR3_XLD 0x20 +#define FMR3_XLU 0x10 + +/*--------------------- T1 ----------------------------*/ +#define FMR4_AIS3 0x80 +#define FMR4_TM 0x40 +#define FMR4_XRA 0x20 +#define FMR4_SSC1 0x10 +#define FMR4_SSC0 0x08 +#define FMR4_AUTO 0x04 +#define FMR4_FM1 0x02 +#define FMR4_FM0 0x01 + +#define FMR5_SRS 0x80 +#define FMR5_EIBR 0x40 +#define FMR5_XLD 0x20 +#define FMR5_XLU 0x10 + + +/* LOOP (Channel Loop Back) + + ------------------ E1 & T1 ---------------------------- */ + +#define LOOP_SFM 0x40 +#define LOOP_ECLB 0x20 +#define LOOP_CLA4 0x10 +#define LOOP_CLA3 0x08 +#define LOOP_CLA2 0x04 +#define LOOP_CLA1 0x02 +#define LOOP_CLA0 0x01 + + + +/* XSW (Transmit Service Word Pulseframe) + + ------------------- E1 --------------------------- */ + +#define XSW_XSIS 0x80 +#define XSW_XTM 0x40 +#define XSW_XRA 0x20 +#define XSW_XY0 0x10 +#define XSW_XY1 0x08 +#define XSW_XY2 0x04 +#define XSW_XY3 0x02 +#define XSW_XY4 0x01 + + +/* XSP (Transmit Spare Bits) + + ------------------- E1 --------------------------- */ + +#define XSP_XAP 0x80 +#define XSP_CASEN 0x40 +#define XSP_TT0 0x20 +#define XSP_EBP 0x10 +#define XSP_AXS 0x08 +#define XSP_XSIF 0x04 +#define XSP_XS13 0x02 +#define XSP_XS15 0x01 + + +/* XC0/1 (Transmit Control 0/1) + ------------------ E1 & T1 ---------------------------- */ + +#define XC0_SA8E 0x80 +#define XC0_SA7E 0x40 +#define XC0_SA6E 0x20 +#define XC0_SA5E 0x10 +#define XC0_SA4E 0x08 +#define XC0_BRM 0x80 +#define XC0_MFBS 0x40 +#define XC0_SFRZ 0x10 +#define XC0_XCO2 0x04 +#define XC0_XCO1 0x02 +#define XC0_XCO0 0x01 + +#define XC1_XTO5 0x20 +#define XC1_XTO4 0x10 +#define XC1_XTO3 0x08 +#define XC1_XTO2 0x04 +#define XC1_XTO1 0x02 +#define XC1_XTO0 0x01 + + +/* RC0/1 (Receive Control 0/1) + ------------------ E1 & T1 ---------------------------- */ + +#define RC0_SICS 0x40 +#define RC0_CRCI 0x20 +#define RC0_XCRCI 0x10 +#define RC0_RDIS 0x08 +#define RC0_RCO2 0x04 +#define RC0_RCO1 0x02 +#define RC0_RCO0 0x01 + +#define RC1_SWD 0x80 +#define RC1_ASY4 0x40 +#define RC1_RRAM 0x40 +#define RC1_RTO5 0x20 +#define RC1_RTO4 0x10 +#define RC1_RTO3 0x08 +#define RC1_RTO2 0x04 +#define RC1_RTO1 0x02 +#define RC1_RTO0 0x01 + + + +/* XPM0-2 (Transmit Pulse Mask 0-2) + --------------------- E1 & T1 ------------------------- */ + +#define XPM0_XP12 0x80 +#define XPM0_XP11 0x40 +#define XPM0_XP10 0x20 +#define XPM0_XP04 0x10 +#define XPM0_XP03 0x08 +#define XPM0_XP02 0x04 +#define XPM0_XP01 0x02 +#define XPM0_XP00 0x01 + +#define XPM1_XP30 0x80 +#define XPM1_XP24 0x40 +#define XPM1_XP23 0x20 +#define XPM1_XP22 0x10 +#define XPM1_XP21 0x08 +#define XPM1_XP20 0x04 +#define XPM1_XP14 0x02 +#define XPM1_XP13 0x01 + +#define XPM2_XLHP 0x80 +#define XPM2_XLT 0x40 +#define XPM2_DAXLT 0x20 +#define XPM2_XP34 0x08 +#define XPM2_XP33 0x04 +#define XPM2_XP32 0x02 +#define XPM2_XP31 0x01 + + +/* TSWM (Transparent Service Word Mask) + ------------------ E1 ---------------------------- */ + +#define TSWM_TSIS 0x80 +#define TSWM_TSIF 0x40 +#define TSWM_TRA 0x20 +#define TSWM_TSA4 0x10 +#define TSWM_TSA5 0x08 +#define TSWM_TSA6 0x04 +#define TSWM_TSA7 0x02 +#define TSWM_TSA8 0x01 + +/* IDLE <Idle Channel Code Register> + + ------------------ E1 & T1 ----------------------- */ + +#define IDLE_IDL7 0x80 +#define IDLE_IDL6 0x40 +#define IDLE_IDL5 0x20 +#define IDLE_IDL4 0x10 +#define IDLE_IDL3 0x08 +#define IDLE_IDL2 0x04 +#define IDLE_IDL1 0x02 +#define IDLE_IDL0 0x01 + + +/* XSA4-8 <Transmit SA4-8 Register(Read/Write) > + -------------------E1 ----------------------------- */ + +#define XSA4_XS47 0x80 +#define XSA4_XS46 0x40 +#define XSA4_XS45 0x20 +#define XSA4_XS44 0x10 +#define XSA4_XS43 0x08 +#define XSA4_XS42 0x04 +#define XSA4_XS41 0x02 +#define XSA4_XS40 0x01 + +#define XSA5_XS57 0x80 +#define XSA5_XS56 0x40 +#define XSA5_XS55 0x20 +#define XSA5_XS54 0x10 +#define XSA5_XS53 0x08 +#define XSA5_XS52 0x04 +#define XSA5_XS51 0x02 +#define XSA5_XS50 0x01 + +#define XSA6_XS67 0x80 +#define XSA6_XS66 0x40 +#define XSA6_XS65 0x20 +#define XSA6_XS64 0x10 +#define XSA6_XS63 0x08 +#define XSA6_XS62 0x04 +#define XSA6_XS61 0x02 +#define XSA6_XS60 0x01 + +#define XSA7_XS77 0x80 +#define XSA7_XS76 0x40 +#define XSA7_XS75 0x20 +#define XSA7_XS74 0x10 +#define XSA7_XS73 0x08 +#define XSA7_XS72 0x04 +#define XSA7_XS71 0x02 +#define XSA7_XS70 0x01 + +#define XSA8_XS87 0x80 +#define XSA8_XS86 0x40 +#define XSA8_XS85 0x20 +#define XSA8_XS84 0x10 +#define XSA8_XS83 0x08 +#define XSA8_XS82 0x04 +#define XSA8_XS81 0x02 +#define XSA8_XS80 0x01 + + +/* XDL1-3 (Transmit DL-Bit Register1-3 (read/write)) + ----------------------- T1 --------------------- */ + +#define XDL1_XDL17 0x80 +#define XDL1_XDL16 0x40 +#define XDL1_XDL15 0x20 +#define XDL1_XDL14 0x10 +#define XDL1_XDL13 0x08 +#define XDL1_XDL12 0x04 +#define XDL1_XDL11 0x02 +#define XDL1_XDL10 0x01 + +#define XDL2_XDL27 0x80 +#define XDL2_XDL26 0x40 +#define XDL2_XDL25 0x20 +#define XDL2_XDL24 0x10 +#define XDL2_XDL23 0x08 +#define XDL2_XDL22 0x04 +#define XDL2_XDL21 0x02 +#define XDL2_XDL20 0x01 + +#define XDL3_XDL37 0x80 +#define XDL3_XDL36 0x40 +#define XDL3_XDL35 0x20 +#define XDL3_XDL34 0x10 +#define XDL3_XDL33 0x08 +#define XDL3_XDL32 0x04 +#define XDL3_XDL31 0x02 +#define XDL3_XDL30 0x01 + + +/* ICB1-4 (Idle Channel Register 1-4) + ------------------ E1 ---------------------------- */ + +#define E1_ICB1_IC0 0x80 +#define E1_ICB1_IC1 0x40 +#define E1_ICB1_IC2 0x20 +#define E1_ICB1_IC3 0x10 +#define E1_ICB1_IC4 0x08 +#define E1_ICB1_IC5 0x04 +#define E1_ICB1_IC6 0x02 +#define E1_ICB1_IC7 0x01 + +#define E1_ICB2_IC8 0x80 +#define E1_ICB2_IC9 0x40 +#define E1_ICB2_IC10 0x20 +#define E1_ICB2_IC11 0x10 +#define E1_ICB2_IC12 0x08 +#define E1_ICB2_IC13 0x04 +#define E1_ICB2_IC14 0x02 +#define E1_ICB2_IC15 0x01 + +#define E1_ICB3_IC16 0x80 +#define E1_ICB3_IC17 0x40 +#define E1_ICB3_IC18 0x20 +#define E1_ICB3_IC19 0x10 +#define E1_ICB3_IC20 0x08 +#define E1_ICB3_IC21 0x04 +#define E1_ICB3_IC22 0x02 +#define E1_ICB3_IC23 0x01 + +#define E1_ICB4_IC24 0x80 +#define E1_ICB4_IC25 0x40 +#define E1_ICB4_IC26 0x20 +#define E1_ICB4_IC27 0x10 +#define E1_ICB4_IC28 0x08 +#define E1_ICB4_IC29 0x04 +#define E1_ICB4_IC30 0x02 +#define E1_ICB4_IC31 0x01 + +/* ICB1-4 (Idle Channel Register 1-4) + ------------------ T1 ---------------------------- */ + +#define T1_ICB1_IC1 0x80 +#define T1_ICB1_IC2 0x40 +#define T1_ICB1_IC3 0x20 +#define T1_ICB1_IC4 0x10 +#define T1_ICB1_IC5 0x08 +#define T1_ICB1_IC6 0x04 +#define T1_ICB1_IC7 0x02 +#define T1_ICB1_IC8 0x01 + +#define T1_ICB2_IC9 0x80 +#define T1_ICB2_IC10 0x40 +#define T1_ICB2_IC11 0x20 +#define T1_ICB2_IC12 0x10 +#define T1_ICB2_IC13 0x08 +#define T1_ICB2_IC14 0x04 +#define T1_ICB2_IC15 0x02 +#define T1_ICB2_IC16 0x01 + +#define T1_ICB3_IC17 0x80 +#define T1_ICB3_IC18 0x40 +#define T1_ICB3_IC19 0x20 +#define T1_ICB3_IC20 0x10 +#define T1_ICB3_IC21 0x08 +#define T1_ICB3_IC22 0x04 +#define T1_ICB3_IC23 0x02 +#define T1_ICB3_IC24 0x01 + +/* FMR3 (Framer Mode Register 3) + --------------------E1------------------------ */ + +#define FMR3_CMI 0x08 +#define FMR3_SYNSA 0x04 +#define FMR3_CFRZ 0x02 +#define FMR3_EXTIW 0x01 + + + +/* CCB1-3 (Clear Channel Register) + ------------------- T1 ----------------------- */ + +#define CCB1_CH1 0x80 +#define CCB1_CH2 0x40 +#define CCB1_CH3 0x20 +#define CCB1_CH4 0x10 +#define CCB1_CH5 0x08 +#define CCB1_CH6 0x04 +#define CCB1_CH7 0x02 +#define CCB1_CH8 0x01 + +#define CCB2_CH9 0x80 +#define CCB2_CH10 0x40 +#define CCB2_CH11 0x20 +#define CCB2_CH12 0x10 +#define CCB2_CH13 0x08 +#define CCB2_CH14 0x04 +#define CCB2_CH15 0x02 +#define CCB2_CH16 0x01 + +#define CCB3_CH17 0x80 +#define CCB3_CH18 0x40 +#define CCB3_CH19 0x20 +#define CCB3_CH20 0x10 +#define CCB3_CH21 0x08 +#define CCB3_CH22 0x04 +#define CCB3_CH23 0x02 +#define CCB3_CH24 0x01 + + +/* LIM0/1 (Line Interface Mode 0/1) + ------------------- E1 & T1 --------------------------- */ + +#define LIM0_XFB 0x80 +#define LIM0_XDOS 0x40 +#define LIM0_SCL1 0x20 +#define LIM0_SCL0 0x10 +#define LIM0_EQON 0x08 +#define LIM0_ELOS 0x04 +#define LIM0_LL 0x02 +#define LIM0_MAS 0x01 + +#define LIM1_EFSC 0x80 +#define LIM1_RIL2 0x40 +#define LIM1_RIL1 0x20 +#define LIM1_RIL0 0x10 +#define LIM1_DCOC 0x08 +#define LIM1_JATT 0x04 +#define LIM1_RL 0x02 +#define LIM1_DRS 0x01 + + +/* PCDR (Pulse Count Detection Register(Read/Write)) + ------------------ E1 & T1 ------------------------- */ + +#define PCDR_PCD7 0x80 +#define PCDR_PCD6 0x40 +#define PCDR_PCD5 0x20 +#define PCDR_PCD4 0x10 +#define PCDR_PCD3 0x08 +#define PCDR_PCD2 0x04 +#define PCDR_PCD1 0x02 +#define PCDR_PCD0 0x01 + +#define PCRR_PCR7 0x80 +#define PCRR_PCR6 0x40 +#define PCRR_PCR5 0x20 +#define PCRR_PCR4 0x10 +#define PCRR_PCR3 0x08 +#define PCRR_PCR2 0x04 +#define PCRR_PCR1 0x02 +#define PCRR_PCR0 0x01 + + +/* LIM2 (Line Interface Mode 2) + + ------------------ E1 & T1 ---------------------------- */ + +#define LIM2_DJA2 0x20 +#define LIM2_DJA1 0x10 +#define LIM2_LOS2 0x02 +#define LIM2_LOS1 0x01 + +/* LCR1 (Loop Code Register 1) */ + +#define LCR1_EPRM 0x80 +#define LCR1_XPRBS 0x40 + +/* SIC1 (System Interface Control 1) */ +#define SIC1_SRSC 0x80 +#define SIC1_RBS1 0x20 +#define SIC1_RBS0 0x10 +#define SIC1_SXSC 0x08 +#define SIC1_XBS1 0x02 +#define SIC1_XBS0 0x01 + +/* DEC (Disable Error Counter) + ------------------ E1 & T1 ---------------------------- */ + +#define DEC_DCEC3 0x20 +#define DEC_DBEC 0x10 +#define DEC_DCEC1 0x08 +#define DEC_DCEC 0x08 +#define DEC_DEBC 0x04 +#define DEC_DCVC 0x02 +#define DEC_DFEC 0x01 + + +/* FALC Register Bits (Receive Mode) + ---------------------------------------------------------------------------- */ + + +/* FRS0/1 (Framer Receive Status Register 0/1) + ----------------- E1 & T1 ---------------------------------- */ + +#define FRS0_LOS 0x80 +#define FRS0_AIS 0x40 +#define FRS0_LFA 0x20 +#define FRS0_RRA 0x10 +#define FRS0_API 0x08 +#define FRS0_NMF 0x04 +#define FRS0_LMFA 0x02 +#define FRS0_FSRF 0x01 + +#define FRS1_TS16RA 0x40 +#define FRS1_TS16LOS 0x20 +#define FRS1_TS16AIS 0x10 +#define FRS1_TS16LFA 0x08 +#define FRS1_EXZD 0x80 +#define FRS1_LLBDD 0x10 +#define FRS1_LLBAD 0x08 +#define FRS1_XLS 0x02 +#define FRS1_XLO 0x01 +#define FRS1_PDEN 0x40 + +/* FRS2/3 (Framer Receive Status Register 2/3) + ----------------- T1 ---------------------------------- */ + +#define FRS2_ESC2 0x80 +#define FRS2_ESC1 0x40 +#define FRS2_ESC0 0x20 + +#define FRS3_FEH5 0x20 +#define FRS3_FEH4 0x10 +#define FRS3_FEH3 0x08 +#define FRS3_FEH2 0x04 +#define FRS3_FEH1 0x02 +#define FRS3_FEH0 0x01 + + +/* RSW (Receive Service Word Pulseframe) + ----------------- E1 ------------------------------ */ + +#define RSW_RSI 0x80 +#define RSW_RRA 0x20 +#define RSW_RYO 0x10 +#define RSW_RY1 0x08 +#define RSW_RY2 0x04 +#define RSW_RY3 0x02 +#define RSW_RY4 0x01 + + +/* RSP (Receive Spare Bits / Additional Status) + ---------------- E1 ------------------------------- */ + +#define RSP_SI1 0x80 +#define RSP_SI2 0x40 +#define RSP_LLBDD 0x10 +#define RSP_LLBAD 0x08 +#define RSP_RSIF 0x04 +#define RSP_RS13 0x02 +#define RSP_RS15 0x01 + + +/* FECL (Framing Error Counter) + ---------------- E1 & T1 -------------------------- */ + +#define FECL_FE7 0x80 +#define FECL_FE6 0x40 +#define FECL_FE5 0x20 +#define FECL_FE4 0x10 +#define FECL_FE3 0x08 +#define FECL_FE2 0x04 +#define FECL_FE1 0x02 +#define FECL_FE0 0x01 + +#define FECH_FE15 0x80 +#define FECH_FE14 0x40 +#define FECH_FE13 0x20 +#define FECH_FE12 0x10 +#define FECH_FE11 0x08 +#define FECH_FE10 0x04 +#define FECH_FE9 0x02 +#define FECH_FE8 0x01 + + +/* CVCl (Code Violation Counter) + ----------------- E1 ------------------------- */ + +#define CVCL_CV7 0x80 +#define CVCL_CV6 0x40 +#define CVCL_CV5 0x20 +#define CVCL_CV4 0x10 +#define CVCL_CV3 0x08 +#define CVCL_CV2 0x04 +#define CVCL_CV1 0x02 +#define CVCL_CV0 0x01 + +#define CVCH_CV15 0x80 +#define CVCH_CV14 0x40 +#define CVCH_CV13 0x20 +#define CVCH_CV12 0x10 +#define CVCH_CV11 0x08 +#define CVCH_CV10 0x04 +#define CVCH_CV9 0x02 +#define CVCH_CV8 0x01 + + +/* CEC1-3L (CRC Error Counter) + ------------------ E1 ----------------------------- */ + +#define CEC1L_CR7 0x80 +#define CEC1L_CR6 0x40 +#define CEC1L_CR5 0x20 +#define CEC1L_CR4 0x10 +#define CEC1L_CR3 0x08 +#define CEC1L_CR2 0x04 +#define CEC1L_CR1 0x02 +#define CEC1L_CR0 0x01 + +#define CEC1H_CR15 0x80 +#define CEC1H_CR14 0x40 +#define CEC1H_CR13 0x20 +#define CEC1H_CR12 0x10 +#define CEC1H_CR11 0x08 +#define CEC1H_CR10 0x04 +#define CEC1H_CR9 0x02 +#define CEC1H_CR8 0x01 + +#define CEC2L_CR7 0x80 +#define CEC2L_CR6 0x40 +#define CEC2L_CR5 0x20 +#define CEC2L_CR4 0x10 +#define CEC2L_CR3 0x08 +#define CEC2L_CR2 0x04 +#define CEC2L_CR1 0x02 +#define CEC2L_CR0 0x01 + +#define CEC2H_CR15 0x80 +#define CEC2H_CR14 0x40 +#define CEC2H_CR13 0x20 +#define CEC2H_CR12 0x10 +#define CEC2H_CR11 0x08 +#define CEC2H_CR10 0x04 +#define CEC2H_CR9 0x02 +#define CEC2H_CR8 0x01 + +#define CEC3L_CR7 0x80 +#define CEC3L_CR6 0x40 +#define CEC3L_CR5 0x20 +#define CEC3L_CR4 0x10 +#define CEC3L_CR3 0x08 +#define CEC3L_CR2 0x04 +#define CEC3L_CR1 0x02 +#define CEC3L_CR0 0x01 + +#define CEC3H_CR15 0x80 +#define CEC3H_CR14 0x40 +#define CEC3H_CR13 0x20 +#define CEC3H_CR12 0x10 +#define CEC3H_CR11 0x08 +#define CEC3H_CR10 0x04 +#define CEC3H_CR9 0x02 +#define CEC3H_CR8 0x01 + + +/* CECL (CRC Error Counter) + + ------------------ T1 ----------------------------- */ + +#define CECL_CR7 0x80 +#define CECL_CR6 0x40 +#define CECL_CR5 0x20 +#define CECL_CR4 0x10 +#define CECL_CR3 0x08 +#define CECL_CR2 0x04 +#define CECL_CR1 0x02 +#define CECL_CR0 0x01 + +#define CECH_CR15 0x80 +#define CECH_CR14 0x40 +#define CECH_CR13 0x20 +#define CECH_CR12 0x10 +#define CECH_CR11 0x08 +#define CECH_CR10 0x04 +#define CECH_CR9 0x02 +#define CECH_CR8 0x01 + +/* EBCL (E Bit Error Counter) + ------------------- E1 & T1 ------------------------- */ + +#define EBCL_EB7 0x80 +#define EBCL_EB6 0x40 +#define EBCL_EB5 0x20 +#define EBCL_EB4 0x10 +#define EBCL_EB3 0x08 +#define EBCL_EB2 0x04 +#define EBCL_EB1 0x02 +#define EBCL_EB0 0x01 + +#define EBCH_EB15 0x80 +#define EBCH_EB14 0x40 +#define EBCH_EB13 0x20 +#define EBCH_EB12 0x10 +#define EBCH_EB11 0x08 +#define EBCH_EB10 0x04 +#define EBCH_EB9 0x02 +#define EBCH_EB8 0x01 + + +/* RSA4-8 (Receive Sa4-8-Bit Register) + -------------------- E1 --------------------------- */ + +#define RSA4_RS47 0x80 +#define RSA4_RS46 0x40 +#define RSA4_RS45 0x20 +#define RSA4_RS44 0x10 +#define RSA4_RS43 0x08 +#define RSA4_RS42 0x04 +#define RSA4_RS41 0x02 +#define RSA4_RS40 0x01 + +#define RSA5_RS57 0x80 +#define RSA5_RS56 0x40 +#define RSA5_RS55 0x20 +#define RSA5_RS54 0x10 +#define RSA5_RS53 0x08 +#define RSA5_RS52 0x04 +#define RSA5_RS51 0x02 +#define RSA5_RS50 0x01 + +#define RSA6_RS67 0x80 +#define RSA6_RS66 0x40 +#define RSA6_RS65 0x20 +#define RSA6_RS64 0x10 +#define RSA6_RS63 0x08 +#define RSA6_RS62 0x04 +#define RSA6_RS61 0x02 +#define RSA6_RS60 0x01 + +#define RSA7_RS77 0x80 +#define RSA7_RS76 0x40 +#define RSA7_RS75 0x20 +#define RSA7_RS74 0x10 +#define RSA7_RS73 0x08 +#define RSA7_RS72 0x04 +#define RSA7_RS71 0x02 +#define RSA7_RS70 0x01 + +#define RSA8_RS87 0x80 +#define RSA8_RS86 0x40 +#define RSA8_RS85 0x20 +#define RSA8_RS84 0x10 +#define RSA8_RS83 0x08 +#define RSA8_RS82 0x04 +#define RSA8_RS81 0x02 +#define RSA8_RS80 0x01 + +/* RSA6S (Receive Sa6 Bit Status Register) + ------------------------ T1 ------------------------- */ + +#define RSA6S_SX 0x20 +#define RSA6S_SF 0x10 +#define RSA6S_SE 0x08 +#define RSA6S_SC 0x04 +#define RSA6S_SA 0x02 +#define RSA6S_S8 0x01 + + +/* RDL1-3 Receive DL-Bit Register1-3) + ------------------------ T1 ------------------------- */ + +#define RDL1_RDL17 0x80 +#define RDL1_RDL16 0x40 +#define RDL1_RDL15 0x20 +#define RDL1_RDL14 0x10 +#define RDL1_RDL13 0x08 +#define RDL1_RDL12 0x04 +#define RDL1_RDL11 0x02 +#define RDL1_RDL10 0x01 + +#define RDL2_RDL27 0x80 +#define RDL2_RDL26 0x40 +#define RDL2_RDL25 0x20 +#define RDL2_RDL24 0x10 +#define RDL2_RDL23 0x08 +#define RDL2_RDL22 0x04 +#define RDL2_RDL21 0x02 +#define RDL2_RDL20 0x01 + +#define RDL3_RDL37 0x80 +#define RDL3_RDL36 0x40 +#define RDL3_RDL35 0x20 +#define RDL3_RDL34 0x10 +#define RDL3_RDL33 0x08 +#define RDL3_RDL32 0x04 +#define RDL3_RDL31 0x02 +#define RDL3_RDL30 0x01 + + +/* SIS (Signaling Status Register) + + -------------------- E1 & T1 -------------------------- */ + +#define SIS_XDOV 0x80 +#define SIS_XFW 0x40 +#define SIS_XREP 0x20 +#define SIS_RLI 0x08 +#define SIS_CEC 0x04 +#define SIS_BOM 0x01 + + +/* RSIS (Receive Signaling Status Register) + + -------------------- E1 & T1 --------------------------- */ + +#define RSIS_VFR 0x80 +#define RSIS_RDO 0x40 +#define RSIS_CRC16 0x20 +#define RSIS_RAB 0x10 +#define RSIS_HA1 0x08 +#define RSIS_HA0 0x04 +#define RSIS_HFR 0x02 +#define RSIS_LA 0x01 + + +/* RBCL/H (Receive Byte Count Low/High) + + ------------------- E1 & T1 ----------------------- */ + +#define RBCL_RBC7 0x80 +#define RBCL_RBC6 0x40 +#define RBCL_RBC5 0x20 +#define RBCL_RBC4 0x10 +#define RBCL_RBC3 0x08 +#define RBCL_RBC2 0x04 +#define RBCL_RBC1 0x02 +#define RBCL_RBC0 0x01 + +#define RBCH_OV 0x10 +#define RBCH_RBC11 0x08 +#define RBCH_RBC10 0x04 +#define RBCH_RBC9 0x02 +#define RBCH_RBC8 0x01 + + +/* ISR1-3 (Interrupt Status Register 1-3) + + ------------------ E1 & T1 ------------------------------ */ + +#define FISR0_RME 0x80 +#define FISR0_RFS 0x40 +#define FISR0_T8MS 0x20 +#define FISR0_ISF 0x20 +#define FISR0_RMB 0x10 +#define FISR0_CASC 0x08 +#define FISR0_RSC 0x08 +#define FISR0_CRC6 0x04 +#define FISR0_CRC4 0x04 +#define FISR0_PDEN 0x02 +#define FISR0_RPF 0x01 + +#define FISR1_CASE 0x80 +#define FISR1_LLBSC 0x80 +#define FISR1_RDO 0x40 +#define FISR1_ALLS 0x20 +#define FISR1_XDU 0x10 +#define FISR1_XMB 0x08 +#define FISR1_XLSC 0x02 +#define FISR1_XPR 0x01 + +#define FISR2_FAR 0x80 +#define FISR2_LFA 0x40 +#define FISR2_MFAR 0x20 +#define FISR2_T400MS 0x10 +#define FISR2_LMFA 0x10 +#define FISR2_AIS 0x08 +#define FISR2_LOS 0x04 +#define FISR2_RAR 0x02 +#define FISR2_RA 0x01 + +#define FISR3_ES 0x80 +#define FISR3_SEC 0x40 +#define FISR3_LMFA16 0x20 +#define FISR3_AIS16 0x10 +#define FISR3_RA16 0x08 +#define FISR3_API 0x04 +#define FISR3_XSLP 0x20 +#define FISR3_XSLN 0x10 +#define FISR3_LLBSC 0x08 +#define FISR3_XRS 0x04 +#define FISR3_SLN 0x02 +#define FISR3_SLP 0x01 + + +/* GIS (Global Interrupt Status Register) + + --------------------- E1 & T1 --------------------- */ + +#define GIS_ISR3 0x08 +#define GIS_ISR2 0x04 +#define GIS_ISR1 0x02 +#define GIS_ISR0 0x01 + + +/* VSTR (Version Status Register) + + --------------------- E1 & T1 --------------------- */ + +#define VSTR_VN3 0x08 +#define VSTR_VN2 0x04 +#define VSTR_VN1 0x02 +#define VSTR_VN0 0x01 + + +/*>>>>>>>>>>>>>>>>>>>>> Local Control Structures <<<<<<<<<<<<<<<<<<<<<<<<< */ + +/* Write-only Registers (E1/T1 control mode write registers) */ +#define XFIFOH 0x00 /* Tx FIFO High Byte */ +#define XFIFOL 0x01 /* Tx FIFO Low Byte */ +#define CMDR 0x02 /* Command Reg */ +#define DEC 0x60 /* Disable Error Counter */ +#define TEST2 0x62 /* Manuf. Test Reg 2 */ +#define XS(nbr) (0x70 + (nbr)) /* Tx CAS Reg (0 to 15) */ + +/* Read-write Registers (E1/T1 status mode read registers) */ +#define MODE 0x03 /* Mode Reg */ +#define RAH1 0x04 /* Receive Address High 1 */ +#define RAH2 0x05 /* Receive Address High 2 */ +#define RAL1 0x06 /* Receive Address Low 1 */ +#define RAL2 0x07 /* Receive Address Low 2 */ +#define IPC 0x08 /* Interrupt Port Configuration */ +#define CCR1 0x09 /* Common Configuration Reg 1 */ +#define CCR3 0x0A /* Common Configuration Reg 3 */ +#define PRE 0x0B /* Preamble Reg */ +#define RTR1 0x0C /* Receive Timeslot Reg 1 */ +#define RTR2 0x0D /* Receive Timeslot Reg 2 */ +#define RTR3 0x0E /* Receive Timeslot Reg 3 */ +#define RTR4 0x0F /* Receive Timeslot Reg 4 */ +#define TTR1 0x10 /* Transmit Timeslot Reg 1 */ +#define TTR2 0x11 /* Transmit Timeslot Reg 2 */ +#define TTR3 0x12 /* Transmit Timeslot Reg 3 */ +#define TTR4 0x13 /* Transmit Timeslot Reg 4 */ +#define IMR0 0x14 /* Interrupt Mask Reg 0 */ +#define IMR1 0x15 /* Interrupt Mask Reg 1 */ +#define IMR2 0x16 /* Interrupt Mask Reg 2 */ +#define IMR3 0x17 /* Interrupt Mask Reg 3 */ +#define IMR4 0x18 /* Interrupt Mask Reg 4 */ +#define IMR5 0x19 /* Interrupt Mask Reg 5 */ +#define FMR0 0x1A /* Framer Mode Reigster 0 */ +#define FMR1 0x1B /* Framer Mode Reigster 1 */ +#define FMR2 0x1C /* Framer Mode Reigster 2 */ +#define LOOP 0x1D /* Channel Loop Back */ +#define XSW 0x1E /* Transmit Service Word */ +#define FMR4 0x1E /* Framer Mode Reg 4 */ +#define XSP 0x1F /* Transmit Spare Bits */ +#define FMR5 0x1F /* Framer Mode Reg 5 */ +#define XC0 0x20 /* Transmit Control 0 */ +#define XC1 0x21 /* Transmit Control 1 */ +#define RC0 0x22 /* Receive Control 0 */ +#define RC1 0x23 /* Receive Control 1 */ +#define XPM0 0x24 /* Transmit Pulse Mask 0 */ +#define XPM1 0x25 /* Transmit Pulse Mask 1 */ +#define XPM2 0x26 /* Transmit Pulse Mask 2 */ +#define TSWM 0x27 /* Transparent Service Word Mask */ +#define TEST1 0x28 /* Manuf. Test Reg 1 */ +#define IDLE 0x29 /* Idle Channel Code */ +#define XSA4 0x2A /* Transmit SA4 Bit Reg */ +#define XDL1 0x2A /* Transmit DL-Bit Reg 2 */ +#define XSA5 0x2B /* Transmit SA4 Bit Reg */ +#define XDL2 0x2B /* Transmit DL-Bit Reg 2 */ +#define XSA6 0x2C /* Transmit SA4 Bit Reg */ +#define XDL3 0x2C /* Transmit DL-Bit Reg 2 */ +#define XSA7 0x2D /* Transmit SA4 Bit Reg */ +#define CCB1 0x2D /* Clear Channel Reg 1 */ +#define XSA8 0x2E /* Transmit SA4 Bit Reg */ +#define CCB2 0x2E /* Clear Channel Reg 2 */ +#define FMR3 0x2F /* Framer Mode Reg. 3 */ +#define CCB3 0x2F /* Clear Channel Reg 3 */ +#define ICB1 0x30 /* Idle Channel Reg 1 */ +#define ICB2 0x31 /* Idle Channel Reg 2 */ +#define ICB3 0x32 /* Idle Channel Reg 3 */ +#define ICB4 0x33 /* Idle Channel Reg 4 */ +#define LIM0 0x34 /* Line Interface Mode 0 */ +#define LIM1 0x35 /* Line Interface Mode 1 */ +#define PCDR 0x36 /* Pulse Count Detection */ +#define PCRR 0x37 /* Pulse Count Recovery */ +#define LIM2 0x38 /* Line Interface Mode Reg 2 */ +#define LCR1 0x39 /* Loop Code Reg 1 */ +#define LCR2 0x3A /* Loop Code Reg 2 */ +#define LCR3 0x3B /* Loop Code Reg 3 */ +#define SIC1 0x3C /* System Interface Control 1 */ + +/* Read-only Registers (E1/T1 control mode read registers) */ +#define RFIFOH 0x00 /* Receive FIFO */ +#define RFIFOL 0x01 /* Receive FIFO */ +#define FRS0 0x4C /* Framer Receive Status 0 */ +#define FRS1 0x4D /* Framer Receive Status 1 */ +#define RSW 0x4E /* Receive Service Word */ +#define FRS2 0x4E /* Framer Receive Status 2 */ +#define RSP 0x4F /* Receive Spare Bits */ +#define FRS3 0x4F /* Framer Receive Status 3 */ +#define FECL 0x50 /* Framing Error Counter */ +#define FECH 0x51 /* Framing Error Counter */ +#define CVCL 0x52 /* Code Violation Counter */ +#define CVCH 0x53 /* Code Violation Counter */ +#define CECL 0x54 /* CRC Error Counter 1 */ +#define CECH 0x55 /* CRC Error Counter 1 */ +#define EBCL 0x56 /* E-Bit Error Counter */ +#define EBCH 0x57 /* E-Bit Error Counter */ +#define BECL 0x58 /* Bit Error Counter Low */ +#define BECH 0x59 /* Bit Error Counter Low */ +#define CEC3 0x5A /* CRC Error Counter 3 (16-bit) */ +#define RSA4 0x5C /* Receive SA4 Bit Reg */ +#define RDL1 0x5C /* Receive DL-Bit Reg 1 */ +#define RSA5 0x5D /* Receive SA5 Bit Reg */ +#define RDL2 0x5D /* Receive DL-Bit Reg 2 */ +#define RSA6 0x5E /* Receive SA6 Bit Reg */ +#define RDL3 0x5E /* Receive DL-Bit Reg 3 */ +#define RSA7 0x5F /* Receive SA7 Bit Reg */ +#define RSA8 0x60 /* Receive SA8 Bit Reg */ +#define RSA6S 0x61 /* Receive SA6 Bit Status Reg */ +#define TSR0 0x62 /* Manuf. Test Reg 0 */ +#define TSR1 0x63 /* Manuf. Test Reg 1 */ +#define SIS 0x64 /* Signaling Status Reg */ +#define RSIS 0x65 /* Receive Signaling Status Reg */ +#define RBCL 0x66 /* Receive Byte Control */ +#define RBCH 0x67 /* Receive Byte Control */ +#define FISR0 0x68 /* Interrupt Status Reg 0 */ +#define FISR1 0x69 /* Interrupt Status Reg 1 */ +#define FISR2 0x6A /* Interrupt Status Reg 2 */ +#define FISR3 0x6B /* Interrupt Status Reg 3 */ +#define GIS 0x6E /* Global Interrupt Status */ +#define VSTR 0x6F /* Version Status */ +#define RS(nbr) (0x70 + (nbr)) /* Rx CAS Reg (0 to 15) */ + +#endif /* _FALC_LH_H */ + diff --git a/drivers/staging/net/pc300.h b/drivers/staging/net/pc300.h new file mode 100644 index 000000000000..2e4f84f6cad4 --- /dev/null +++ b/drivers/staging/net/pc300.h @@ -0,0 +1,436 @@ +/* + * pc300.h Cyclades-PC300(tm) Kernel API Definitions. + * + * Author: Ivan Passos <ivan@cyclades.com> + * + * Copyright: (c) 1999-2002 Cyclades Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * $Log: pc300.h,v $ + * Revision 3.12 2002/03/07 14:17:09 henrique + * License data fixed + * + * Revision 3.11 2002/01/28 21:09:39 daniela + * Included ';' after pc300hw.bus. + * + * Revision 3.10 2002/01/17 17:58:52 ivan + * Support for PC300-TE/M (PMC). + * + * Revision 3.9 2001/09/28 13:30:53 daniela + * Renamed dma_start routine to rx_dma_start. + * + * Revision 3.8 2001/09/24 13:03:45 daniela + * Fixed BOF interrupt treatment. Created dma_start routine. + * + * Revision 3.7 2001/08/10 17:19:58 daniela + * Fixed IOCTLs defines. + * + * Revision 3.6 2001/07/18 19:24:42 daniela + * Included kernel version. + * + * Revision 3.5 2001/07/05 18:38:08 daniela + * DMA transmission bug fix. + * + * Revision 3.4 2001/06/26 17:10:40 daniela + * New configuration parameters (line code, CRC calculation and clock). + * + * Revision 3.3 2001/06/22 13:13:02 regina + * MLPPP implementation + * + * Revision 3.2 2001/06/18 17:56:09 daniela + * Increased DEF_MTU and TX_QUEUE_LEN. + * + * Revision 3.1 2001/06/15 12:41:10 regina + * upping major version number + * + * Revision 1.1.1.1 2001/06/13 20:25:06 daniela + * PC300 initial CVS version (3.4.0-pre1) + * + * Revision 2.3 2001/03/05 daniela + * Created struct pc300conf, to provide the hardware information to pc300util. + * Inclusion of 'alloc_ramsize' field on structure 'pc300hw'. + * + * Revision 2.2 2000/12/22 daniela + * Structures and defines to support pc300util: statistics, status, + * loopback tests, trace. + * + * Revision 2.1 2000/09/28 ivan + * Inclusion of 'iophys' and 'iosize' fields on structure 'pc300hw', to + * allow release of I/O region at module unload. + * Changed location of include files. + * + * Revision 2.0 2000/03/27 ivan + * Added support for the PC300/TE cards. + * + * Revision 1.1 2000/01/31 ivan + * Replaced 'pc300[drv|sca].h' former PC300 driver include files. + * + * Revision 1.0 1999/12/16 ivan + * First official release. + * Inclusion of 'nchan' field on structure 'pc300hw', to allow variable + * number of ports per card. + * Inclusion of 'if_ptr' field on structure 'pc300dev'. + * + * Revision 0.6 1999/11/17 ivan + * Changed X.25-specific function names to comply with adopted convention. + * + * Revision 0.5 1999/11/16 Daniela Squassoni + * X.25 support. + * + * Revision 0.4 1999/11/15 ivan + * Inclusion of 'clock' field on structure 'pc300hw'. + * + * Revision 0.3 1999/11/10 ivan + * IOCTL name changing. + * Inclusion of driver function prototypes. + * + * Revision 0.2 1999/11/03 ivan + * Inclusion of 'tx_skb' and union 'ifu' on structure 'pc300dev'. + * + * Revision 0.1 1999/01/15 ivan + * Initial version. + * + */ + +#ifndef _PC300_H +#define _PC300_H + +#include <linux/hdlc.h> +#include "hd64572.h" +#include "pc300-falc-lh.h" + +#define PC300_PROTO_MLPPP 1 + +#define PC300_MAXCHAN 2 /* Number of channels per card */ + +#define PC300_RAMSIZE 0x40000 /* RAM window size (256Kb) */ +#define PC300_FALCSIZE 0x400 /* FALC window size (1Kb) */ + +#define PC300_OSC_CLOCK 24576000 +#define PC300_PCI_CLOCK 33000000 + +#define BD_DEF_LEN 0x0800 /* DMA buffer length (2KB) */ +#define DMA_TX_MEMSZ 0x8000 /* Total DMA Tx memory size (32KB/ch) */ +#define DMA_RX_MEMSZ 0x10000 /* Total DMA Rx memory size (64KB/ch) */ + +#define N_DMA_TX_BUF (DMA_TX_MEMSZ / BD_DEF_LEN) /* DMA Tx buffers */ +#define N_DMA_RX_BUF (DMA_RX_MEMSZ / BD_DEF_LEN) /* DMA Rx buffers */ + +/* DMA Buffer Offsets */ +#define DMA_TX_BASE ((N_DMA_TX_BUF + N_DMA_RX_BUF) * \ + PC300_MAXCHAN * sizeof(pcsca_bd_t)) +#define DMA_RX_BASE (DMA_TX_BASE + PC300_MAXCHAN*DMA_TX_MEMSZ) + +/* DMA Descriptor Offsets */ +#define DMA_TX_BD_BASE 0x0000 +#define DMA_RX_BD_BASE (DMA_TX_BD_BASE + ((PC300_MAXCHAN*DMA_TX_MEMSZ / \ + BD_DEF_LEN) * sizeof(pcsca_bd_t))) + +/* DMA Descriptor Macros */ +#define TX_BD_ADDR(chan, n) (DMA_TX_BD_BASE + \ + ((N_DMA_TX_BUF*chan) + n) * sizeof(pcsca_bd_t)) +#define RX_BD_ADDR(chan, n) (DMA_RX_BD_BASE + \ + ((N_DMA_RX_BUF*chan) + n) * sizeof(pcsca_bd_t)) + +/* Macro to access the FALC registers (TE only) */ +#define F_REG(reg, chan) (0x200*(chan) + ((reg)<<2)) + +/*************************************** + * Memory access functions/macros * + * (required to support Alpha systems) * + ***************************************/ +#define cpc_writeb(port,val) {writeb((u8)(val),(port)); mb();} +#define cpc_writew(port,val) {writew((ushort)(val),(port)); mb();} +#define cpc_writel(port,val) {writel((u32)(val),(port)); mb();} + +#define cpc_readb(port) readb(port) +#define cpc_readw(port) readw(port) +#define cpc_readl(port) readl(port) + +/****** Data Structures *****************************************************/ + +/* + * RUNTIME_9050 - PLX PCI9050-1 local configuration and shared runtime + * registers. This structure can be used to access the 9050 registers + * (memory mapped). + */ +struct RUNTIME_9050 { + u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */ + u32 loc_rom_range; /* 10h : Local ROM Range */ + u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */ + u32 loc_rom_base; /* 24h : Local ROM Base */ + u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */ + u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */ + u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */ + u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */ + u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */ +}; + +#define PLX_9050_LINT1_ENABLE 0x01 +#define PLX_9050_LINT1_POL 0x02 +#define PLX_9050_LINT1_STATUS 0x04 +#define PLX_9050_LINT2_ENABLE 0x08 +#define PLX_9050_LINT2_POL 0x10 +#define PLX_9050_LINT2_STATUS 0x20 +#define PLX_9050_INTR_ENABLE 0x40 +#define PLX_9050_SW_INTR 0x80 + +/* Masks to access the init_ctrl PLX register */ +#define PC300_CLKSEL_MASK (0x00000004UL) +#define PC300_CHMEDIA_MASK(chan) (0x00000020UL<<(chan*3)) +#define PC300_CTYPE_MASK (0x00000800UL) + +/* CPLD Registers (base addr = falcbase, TE only) */ +/* CPLD v. 0 */ +#define CPLD_REG1 0x140 /* Chip resets, DCD/CTS status */ +#define CPLD_REG2 0x144 /* Clock enable , LED control */ +/* CPLD v. 2 or higher */ +#define CPLD_V2_REG1 0x100 /* Chip resets, DCD/CTS status */ +#define CPLD_V2_REG2 0x104 /* Clock enable , LED control */ +#define CPLD_ID_REG 0x108 /* CPLD version */ + +/* CPLD Register bit description: for the FALC bits, they should always be + set based on the channel (use (bit<<(2*ch)) to access the correct bit for + that channel) */ +#define CPLD_REG1_FALC_RESET 0x01 +#define CPLD_REG1_SCA_RESET 0x02 +#define CPLD_REG1_GLOBAL_CLK 0x08 +#define CPLD_REG1_FALC_DCD 0x10 +#define CPLD_REG1_FALC_CTS 0x20 + +#define CPLD_REG2_FALC_TX_CLK 0x01 +#define CPLD_REG2_FALC_RX_CLK 0x02 +#define CPLD_REG2_FALC_LED1 0x10 +#define CPLD_REG2_FALC_LED2 0x20 + +/* Structure with FALC-related fields (TE only) */ +#define PC300_FALC_MAXLOOP 0x0000ffff /* for falc_issue_cmd() */ + +typedef struct falc { + u8 sync; /* If true FALC is synchronized */ + u8 active; /* if TRUE then already active */ + u8 loop_active; /* if TRUE a line loopback UP was received */ + u8 loop_gen; /* if TRUE a line loopback UP was issued */ + + u8 num_channels; + u8 offset; /* 1 for T1, 0 for E1 */ + u8 full_bandwidth; + + u8 xmb_cause; + u8 multiframe_mode; + + /* Statistics */ + u16 pden; /* Pulse Density violation count */ + u16 los; /* Loss of Signal count */ + u16 losr; /* Loss of Signal recovery count */ + u16 lfa; /* Loss of frame alignment count */ + u16 farec; /* Frame Alignment Recovery count */ + u16 lmfa; /* Loss of multiframe alignment count */ + u16 ais; /* Remote Alarm indication Signal count */ + u16 sec; /* One-second timer */ + u16 es; /* Errored second */ + u16 rai; /* remote alarm received */ + u16 bec; + u16 fec; + u16 cvc; + u16 cec; + u16 ebc; + + /* Status */ + u8 red_alarm; + u8 blue_alarm; + u8 loss_fa; + u8 yellow_alarm; + u8 loss_mfa; + u8 prbs; +} falc_t; + +typedef struct falc_status { + u8 sync; /* If true FALC is synchronized */ + u8 red_alarm; + u8 blue_alarm; + u8 loss_fa; + u8 yellow_alarm; + u8 loss_mfa; + u8 prbs; +} falc_status_t; + +typedef struct rsv_x21_status { + u8 dcd; + u8 dsr; + u8 cts; + u8 rts; + u8 dtr; +} rsv_x21_status_t; + +typedef struct pc300stats { + int hw_type; + u32 line_on; + u32 line_off; + struct net_device_stats gen_stats; + falc_t te_stats; +} pc300stats_t; + +typedef struct pc300status { + int hw_type; + rsv_x21_status_t gen_status; + falc_status_t te_status; +} pc300status_t; + +typedef struct pc300loopback { + char loop_type; + char loop_on; +} pc300loopback_t; + +typedef struct pc300patterntst { + char patrntst_on; /* 0 - off; 1 - on; 2 - read num_errors */ + u16 num_errors; +} pc300patterntst_t; + +typedef struct pc300dev { + struct pc300ch *chan; + u8 trace_on; + u32 line_on; /* DCD(X.21, RSV) / sync(TE) change counters */ + u32 line_off; + char name[16]; + struct net_device *dev; +#ifdef CONFIG_PC300_MLPPP + void *cpc_tty; /* information to PC300 TTY driver */ +#endif +}pc300dev_t; + +typedef struct pc300hw { + int type; /* RSV, X21, etc. */ + int bus; /* Bus (PCI, PMC, etc.) */ + int nchan; /* number of channels */ + int irq; /* interrupt request level */ + u32 clock; /* Board clock */ + u8 cpld_id; /* CPLD ID (TE only) */ + u16 cpld_reg1; /* CPLD reg 1 (TE only) */ + u16 cpld_reg2; /* CPLD reg 2 (TE only) */ + u16 gpioc_reg; /* PLX GPIOC reg */ + u16 intctl_reg; /* PLX Int Ctrl/Status reg */ + u32 iophys; /* PLX registers I/O base */ + u32 iosize; /* PLX registers I/O size */ + u32 plxphys; /* PLX registers MMIO base (physical) */ + void __iomem * plxbase; /* PLX registers MMIO base (virtual) */ + u32 plxsize; /* PLX registers MMIO size */ + u32 scaphys; /* SCA registers MMIO base (physical) */ + void __iomem * scabase; /* SCA registers MMIO base (virtual) */ + u32 scasize; /* SCA registers MMIO size */ + u32 ramphys; /* On-board RAM MMIO base (physical) */ + void __iomem * rambase; /* On-board RAM MMIO base (virtual) */ + u32 alloc_ramsize; /* RAM MMIO size allocated by the PCI bridge */ + u32 ramsize; /* On-board RAM MMIO size */ + u32 falcphys; /* FALC registers MMIO base (physical) */ + void __iomem * falcbase;/* FALC registers MMIO base (virtual) */ + u32 falcsize; /* FALC registers MMIO size */ +} pc300hw_t; + +typedef struct pc300chconf { + sync_serial_settings phys_settings; /* Clock type/rate (in bps), + loopback mode */ + raw_hdlc_proto proto_settings; /* Encoding, parity (CRC) */ + u32 media; /* HW media (RS232, V.35, etc.) */ + u32 proto; /* Protocol (PPP, X.25, etc.) */ + + /* TE-specific parameters */ + u8 lcode; /* Line Code (AMI, B8ZS, etc.) */ + u8 fr_mode; /* Frame Mode (ESF, D4, etc.) */ + u8 lbo; /* Line Build Out */ + u8 rx_sens; /* Rx Sensitivity (long- or short-haul) */ + u32 tslot_bitmap; /* bit[i]=1 => timeslot _i_ is active */ +} pc300chconf_t; + +typedef struct pc300ch { + struct pc300 *card; + int channel; + pc300dev_t d; + pc300chconf_t conf; + u8 tx_first_bd; /* First TX DMA block descr. w/ data */ + u8 tx_next_bd; /* Next free TX DMA block descriptor */ + u8 rx_first_bd; /* First free RX DMA block descriptor */ + u8 rx_last_bd; /* Last free RX DMA block descriptor */ + u8 nfree_tx_bd; /* Number of free TX DMA block descriptors */ + falc_t falc; /* FALC structure (TE only) */ +} pc300ch_t; + +typedef struct pc300 { + pc300hw_t hw; /* hardware config. */ + pc300ch_t chan[PC300_MAXCHAN]; + spinlock_t card_lock; +} pc300_t; + +typedef struct pc300conf { + pc300hw_t hw; + pc300chconf_t conf; +} pc300conf_t; + +/* DEV ioctl() commands */ +#define N_SPPP_IOCTLS 2 + +enum pc300_ioctl_cmds { + SIOCCPCRESERVED = (SIOCDEVPRIVATE + N_SPPP_IOCTLS), + SIOCGPC300CONF, + SIOCSPC300CONF, + SIOCGPC300STATUS, + SIOCGPC300FALCSTATUS, + SIOCGPC300UTILSTATS, + SIOCGPC300UTILSTATUS, + SIOCSPC300TRACE, + SIOCSPC300LOOPBACK, + SIOCSPC300PATTERNTEST, +}; + +/* Loopback types - PC300/TE boards */ +enum pc300_loopback_cmds { + PC300LOCLOOP = 1, + PC300REMLOOP, + PC300PAYLOADLOOP, + PC300GENLOOPUP, + PC300GENLOOPDOWN, +}; + +/* Control Constant Definitions */ +#define PC300_RSV 0x01 +#define PC300_X21 0x02 +#define PC300_TE 0x03 + +#define PC300_PCI 0x00 +#define PC300_PMC 0x01 + +#define PC300_LC_AMI 0x01 +#define PC300_LC_B8ZS 0x02 +#define PC300_LC_NRZ 0x03 +#define PC300_LC_HDB3 0x04 + +/* Framing (T1) */ +#define PC300_FR_ESF 0x01 +#define PC300_FR_D4 0x02 +#define PC300_FR_ESF_JAPAN 0x03 + +/* Framing (E1) */ +#define PC300_FR_MF_CRC4 0x04 +#define PC300_FR_MF_NON_CRC4 0x05 +#define PC300_FR_UNFRAMED 0x06 + +#define PC300_LBO_0_DB 0x00 +#define PC300_LBO_7_5_DB 0x01 +#define PC300_LBO_15_DB 0x02 +#define PC300_LBO_22_5_DB 0x03 + +#define PC300_RX_SENS_SH 0x01 +#define PC300_RX_SENS_LH 0x02 + +#define PC300_TX_TIMEOUT (2*HZ) +#define PC300_TX_QUEUE_LEN 100 +#define PC300_DEF_MTU 1600 + +/* Function Prototypes */ +int cpc_open(struct net_device *dev); + +#endif /* _PC300_H */ diff --git a/drivers/staging/net/pc300_drv.c b/drivers/staging/net/pc300_drv.c new file mode 100644 index 000000000000..cb0f8d932b0c --- /dev/null +++ b/drivers/staging/net/pc300_drv.c @@ -0,0 +1,3670 @@ +#define USE_PCI_CLOCK +static const char rcsid[] = +"Revision: 3.4.5 Date: 2002/03/07 "; + +/* + * pc300.c Cyclades-PC300(tm) Driver. + * + * Author: Ivan Passos <ivan@cyclades.com> + * Maintainer: PC300 Maintainer <pc300@cyclades.com> + * + * Copyright: (c) 1999-2003 Cyclades Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Using tabstop = 4. + * + * $Log: pc300_drv.c,v $ + * Revision 3.23 2002/03/20 13:58:40 henrique + * Fixed ortographic mistakes + * + * Revision 3.22 2002/03/13 16:56:56 henrique + * Take out the debug messages + * + * Revision 3.21 2002/03/07 14:17:09 henrique + * License data fixed + * + * Revision 3.20 2002/01/17 17:58:52 ivan + * Support for PC300-TE/M (PMC). + * + * Revision 3.19 2002/01/03 17:08:47 daniela + * Enables DMA reception when the SCA-II disables it improperly. + * + * Revision 3.18 2001/12/03 18:47:50 daniela + * Esthetic changes. + * + * Revision 3.17 2001/10/19 16:50:13 henrique + * Patch to kernel 2.4.12 and new generic hdlc. + * + * Revision 3.16 2001/10/16 15:12:31 regina + * clear statistics + * + * Revision 3.11 to 3.15 2001/10/11 20:26:04 daniela + * More DMA fixes for noisy lines. + * Return the size of bad frames in dma_get_rx_frame_size, so that the Rx buffer + * descriptors can be cleaned by dma_buf_read (called in cpc_net_rx). + * Renamed dma_start routine to rx_dma_start. Improved Rx statistics. + * Fixed BOF interrupt treatment. Created dma_start routine. + * Changed min and max to cpc_min and cpc_max. + * + * Revision 3.10 2001/08/06 12:01:51 regina + * Fixed problem in DSR_DE bit. + * + * Revision 3.9 2001/07/18 19:27:26 daniela + * Added some history comments. + * + * Revision 3.8 2001/07/12 13:11:19 regina + * bug fix - DCD-OFF in pc300 tty driver + * + * Revision 3.3 to 3.7 2001/07/06 15:00:20 daniela + * Removing kernel 2.4.3 and previous support. + * DMA transmission bug fix. + * MTU check in cpc_net_rx fixed. + * Boot messages reviewed. + * New configuration parameters (line code, CRC calculation and clock). + * + * Revision 3.2 2001/06/22 13:13:02 regina + * MLPPP implementation. Changed the header of message trace to include + * the device name. New format : "hdlcX[R/T]: ". + * Default configuration changed. + * + * Revision 3.1 2001/06/15 regina + * in cpc_queue_xmit, netif_stop_queue is called if don't have free descriptor + * upping major version number + * + * Revision 1.1.1.1 2001/06/13 20:25:04 daniela + * PC300 initial CVS version (3.4.0-pre1) + * + * Revision 3.0.1.2 2001/06/08 daniela + * Did some changes in the DMA programming implementation to avoid the + * occurrence of a SCA-II bug when CDA is accessed during a DMA transfer. + * + * Revision 3.0.1.1 2001/05/02 daniela + * Added kernel 2.4.3 support. + * + * Revision 3.0.1.0 2001/03/13 daniela, henrique + * Added Frame Relay Support. + * Driver now uses HDLC generic driver to provide protocol support. + * + * Revision 3.0.0.8 2001/03/02 daniela + * Fixed ram size detection. + * Changed SIOCGPC300CONF ioctl, to give hw information to pc300util. + * + * Revision 3.0.0.7 2001/02/23 daniela + * netif_stop_queue called before the SCA-II transmition commands in + * cpc_queue_xmit, and with interrupts disabled to avoid race conditions with + * transmition interrupts. + * Fixed falc_check_status for Unframed E1. + * + * Revision 3.0.0.6 2000/12/13 daniela + * Implemented pc300util support: trace, statistics, status and loopback + * tests for the PC300 TE boards. + * + * Revision 3.0.0.5 2000/12/12 ivan + * Added support for Unframed E1. + * Implemented monitor mode. + * Fixed DCD sensitivity on the second channel. + * Driver now complies with new PCI kernel architecture. + * + * Revision 3.0.0.4 2000/09/28 ivan + * Implemented DCD sensitivity. + * Moved hardware-specific open to the end of cpc_open, to avoid race + * conditions with early reception interrupts. + * Included code for [request|release]_mem_region(). + * Changed location of pc300.h . + * Minor code revision (contrib. of Jeff Garzik). + * + * Revision 3.0.0.3 2000/07/03 ivan + * Previous bugfix for the framing errors with external clock made X21 + * boards stop working. This version fixes it. + * + * Revision 3.0.0.2 2000/06/23 ivan + * Revisited cpc_queue_xmit to prevent race conditions on Tx DMA buffer + * handling when Tx timeouts occur. + * Revisited Rx statistics. + * Fixed a bug in the SCA-II programming that would cause framing errors + * when external clock was configured. + * + * Revision 3.0.0.1 2000/05/26 ivan + * Added logic in the SCA interrupt handler so that no board can monopolize + * the driver. + * Request PLX I/O region, although driver doesn't use it, to avoid + * problems with other drivers accessing it. + * + * Revision 3.0.0.0 2000/05/15 ivan + * Did some changes in the DMA programming implementation to avoid the + * occurrence of a SCA-II bug in the second channel. + * Implemented workaround for PLX9050 bug that would cause a system lockup + * in certain systems, depending on the MMIO addresses allocated to the + * board. + * Fixed the FALC chip programming to avoid synchronization problems in the + * second channel (TE only). + * Implemented a cleaner and faster Tx DMA descriptor cleanup procedure in + * cpc_queue_xmit(). + * Changed the built-in driver implementation so that the driver can use the + * general 'hdlcN' naming convention instead of proprietary device names. + * Driver load messages are now device-centric, instead of board-centric. + * Dynamic allocation of net_device structures. + * Code is now compliant with the new module interface (module_[init|exit]). + * Make use of the PCI helper functions to access PCI resources. + * + * Revision 2.0.0.0 2000/04/15 ivan + * Added support for the PC300/TE boards (T1/FT1/E1/FE1). + * + * Revision 1.1.0.0 2000/02/28 ivan + * Major changes in the driver architecture. + * Softnet compliancy implemented. + * Driver now reports physical instead of virtual memory addresses. + * Added cpc_change_mtu function. + * + * Revision 1.0.0.0 1999/12/16 ivan + * First official release. + * Support for 1- and 2-channel boards (which use distinct PCI Device ID's). + * Support for monolythic installation (i.e., drv built into the kernel). + * X.25 additional checking when lapb_[dis]connect_request returns an error. + * SCA programming now covers X.21 as well. + * + * Revision 0.3.1.0 1999/11/18 ivan + * Made X.25 support configuration-dependent (as it depends on external + * modules to work). + * Changed X.25-specific function names to comply with adopted convention. + * Fixed typos in X.25 functions that would cause compile errors (Daniela). + * Fixed bug in ch_config that would disable interrupts on a previously + * enabled channel if the other channel on the same board was enabled later. + * + * Revision 0.3.0.0 1999/11/16 daniela + * X.25 support. + * + * Revision 0.2.3.0 1999/11/15 ivan + * Function cpc_ch_status now provides more detailed information. + * Added support for X.21 clock configuration. + * Changed TNR1 setting in order to prevent Tx FIFO overaccesses by the SCA. + * Now using PCI clock instead of internal oscillator clock for the SCA. + * + * Revision 0.2.2.0 1999/11/10 ivan + * Changed the *_dma_buf_check functions so that they would print only + * the useful info instead of the whole buffer descriptor bank. + * Fixed bug in cpc_queue_xmit that would eventually crash the system + * in case of a packet drop. + * Implemented TX underrun handling. + * Improved SCA fine tuning to boost up its performance. + * + * Revision 0.2.1.0 1999/11/03 ivan + * Added functions *dma_buf_pt_init to allow independent initialization + * of the next-descr. and DMA buffer pointers on the DMA descriptors. + * Kernel buffer release and tbusy clearing is now done in the interrupt + * handler. + * Fixed bug in cpc_open that would cause an interface reopen to fail. + * Added a protocol-specific code section in cpc_net_rx. + * Removed printk level defs (they might be added back after the beta phase). + * + * Revision 0.2.0.0 1999/10/28 ivan + * Revisited the code so that new protocols can be easily added / supported. + * + * Revision 0.1.0.1 1999/10/20 ivan + * Mostly "esthetic" changes. + * + * Revision 0.1.0.0 1999/10/11 ivan + * Initial version. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/net.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/spinlock.h> +#include <linux/if.h> +#include <linux/slab.h> +#include <net/arp.h> + +#include <asm/io.h> +#include <asm/uaccess.h> + +#include "pc300.h" + +#define CPC_LOCK(card,flags) \ + do { \ + spin_lock_irqsave(&card->card_lock, flags); \ + } while (0) + +#define CPC_UNLOCK(card,flags) \ + do { \ + spin_unlock_irqrestore(&card->card_lock, flags); \ + } while (0) + +#undef PC300_DEBUG_PCI +#undef PC300_DEBUG_INTR +#undef PC300_DEBUG_TX +#undef PC300_DEBUG_RX +#undef PC300_DEBUG_OTHER + +static DEFINE_PCI_DEVICE_TABLE(cpc_pci_dev_id) = { + /* PC300/RSV or PC300/X21, 2 chan */ + {0x120e, 0x300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x300}, + /* PC300/RSV or PC300/X21, 1 chan */ + {0x120e, 0x301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x301}, + /* PC300/TE, 2 chan */ + {0x120e, 0x310, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x310}, + /* PC300/TE, 1 chan */ + {0x120e, 0x311, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x311}, + /* PC300/TE-M, 2 chan */ + {0x120e, 0x320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x320}, + /* PC300/TE-M, 1 chan */ + {0x120e, 0x321, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x321}, + /* End of table */ + {0,}, +}; +MODULE_DEVICE_TABLE(pci, cpc_pci_dev_id); + +#ifndef cpc_min +#define cpc_min(a,b) (((a)<(b))?(a):(b)) +#endif +#ifndef cpc_max +#define cpc_max(a,b) (((a)>(b))?(a):(b)) +#endif + +/* prototypes */ +static void tx_dma_buf_pt_init(pc300_t *, int); +static void tx_dma_buf_init(pc300_t *, int); +static void rx_dma_buf_pt_init(pc300_t *, int); +static void rx_dma_buf_init(pc300_t *, int); +static void tx_dma_buf_check(pc300_t *, int); +static void rx_dma_buf_check(pc300_t *, int); +static irqreturn_t cpc_intr(int, void *); +static int clock_rate_calc(u32, u32, int *); +static u32 detect_ram(pc300_t *); +static void plx_init(pc300_t *); +static void cpc_trace(struct net_device *, struct sk_buff *, char); +static int cpc_attach(struct net_device *, unsigned short, unsigned short); +static int cpc_close(struct net_device *dev); + +#ifdef CONFIG_PC300_MLPPP +void cpc_tty_init(pc300dev_t * dev); +void cpc_tty_unregister_service(pc300dev_t * pc300dev); +void cpc_tty_receive(pc300dev_t * pc300dev); +void cpc_tty_trigger_poll(pc300dev_t * pc300dev); +#endif + +/************************/ +/*** DMA Routines ***/ +/************************/ +static void tx_dma_buf_pt_init(pc300_t * card, int ch) +{ + int i; + int ch_factor = ch * N_DMA_TX_BUF; + volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase + + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); + + for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) { + cpc_writel(&ptdescr->next, (u32)(DMA_TX_BD_BASE + + (ch_factor + ((i + 1) & (N_DMA_TX_BUF - 1))) * sizeof(pcsca_bd_t))); + cpc_writel(&ptdescr->ptbuf, + (u32)(DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN)); + } +} + +static void tx_dma_buf_init(pc300_t * card, int ch) +{ + int i; + int ch_factor = ch * N_DMA_TX_BUF; + volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase + + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); + + for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) { + memset_io(ptdescr, 0, sizeof(pcsca_bd_t)); + cpc_writew(&ptdescr->len, 0); + cpc_writeb(&ptdescr->status, DST_OSB); + } + tx_dma_buf_pt_init(card, ch); +} + +static void rx_dma_buf_pt_init(pc300_t * card, int ch) +{ + int i; + int ch_factor = ch * N_DMA_RX_BUF; + volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase + + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); + + for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) { + cpc_writel(&ptdescr->next, (u32)(DMA_RX_BD_BASE + + (ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t))); + cpc_writel(&ptdescr->ptbuf, + (u32)(DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN)); + } +} + +static void rx_dma_buf_init(pc300_t * card, int ch) +{ + int i; + int ch_factor = ch * N_DMA_RX_BUF; + volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase + + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); + + for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) { + memset_io(ptdescr, 0, sizeof(pcsca_bd_t)); + cpc_writew(&ptdescr->len, 0); + cpc_writeb(&ptdescr->status, 0); + } + rx_dma_buf_pt_init(card, ch); +} + +static void tx_dma_buf_check(pc300_t * card, int ch) +{ + volatile pcsca_bd_t __iomem *ptdescr; + int i; + u16 first_bd = card->chan[ch].tx_first_bd; + u16 next_bd = card->chan[ch].tx_next_bd; + + printk("#CH%d: f_bd = %d(0x%08zx), n_bd = %d(0x%08zx)\n", ch, + first_bd, TX_BD_ADDR(ch, first_bd), + next_bd, TX_BD_ADDR(ch, next_bd)); + for (i = first_bd, + ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, first_bd)); + i != ((next_bd + 1) & (N_DMA_TX_BUF - 1)); + i = (i + 1) & (N_DMA_TX_BUF - 1), + ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, i))) { + printk("\n CH%d TX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d", + ch, i, cpc_readl(&ptdescr->next), + cpc_readl(&ptdescr->ptbuf), + cpc_readb(&ptdescr->status), cpc_readw(&ptdescr->len)); + } + printk("\n"); +} + +#ifdef PC300_DEBUG_OTHER +/* Show all TX buffer descriptors */ +static void tx1_dma_buf_check(pc300_t * card, int ch) +{ + volatile pcsca_bd_t __iomem *ptdescr; + int i; + u16 first_bd = card->chan[ch].tx_first_bd; + u16 next_bd = card->chan[ch].tx_next_bd; + u32 scabase = card->hw.scabase; + + printk ("\nnfree_tx_bd = %d\n", card->chan[ch].nfree_tx_bd); + printk("#CH%d: f_bd = %d(0x%08x), n_bd = %d(0x%08x)\n", ch, + first_bd, TX_BD_ADDR(ch, first_bd), + next_bd, TX_BD_ADDR(ch, next_bd)); + printk("TX_CDA=0x%08x, TX_EDA=0x%08x\n", + cpc_readl(scabase + DTX_REG(CDAL, ch)), + cpc_readl(scabase + DTX_REG(EDAL, ch))); + for (i = 0; i < N_DMA_TX_BUF; i++) { + ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, i)); + printk("\n CH%d TX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d", + ch, i, cpc_readl(&ptdescr->next), + cpc_readl(&ptdescr->ptbuf), + cpc_readb(&ptdescr->status), cpc_readw(&ptdescr->len)); + } + printk("\n"); +} +#endif + +static void rx_dma_buf_check(pc300_t * card, int ch) +{ + volatile pcsca_bd_t __iomem *ptdescr; + int i; + u16 first_bd = card->chan[ch].rx_first_bd; + u16 last_bd = card->chan[ch].rx_last_bd; + int ch_factor; + + ch_factor = ch * N_DMA_RX_BUF; + printk("#CH%d: f_bd = %d, l_bd = %d\n", ch, first_bd, last_bd); + for (i = 0, ptdescr = (card->hw.rambase + + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); + i < N_DMA_RX_BUF; i++, ptdescr++) { + if (cpc_readb(&ptdescr->status) & DST_OSB) + printk ("\n CH%d RX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d", + ch, i, cpc_readl(&ptdescr->next), + cpc_readl(&ptdescr->ptbuf), + cpc_readb(&ptdescr->status), + cpc_readw(&ptdescr->len)); + } + printk("\n"); +} + +static int dma_get_rx_frame_size(pc300_t * card, int ch) +{ + volatile pcsca_bd_t __iomem *ptdescr; + u16 first_bd = card->chan[ch].rx_first_bd; + int rcvd = 0; + volatile u8 status; + + ptdescr = (card->hw.rambase + RX_BD_ADDR(ch, first_bd)); + while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) { + rcvd += cpc_readw(&ptdescr->len); + first_bd = (first_bd + 1) & (N_DMA_RX_BUF - 1); + if ((status & DST_EOM) || (first_bd == card->chan[ch].rx_last_bd)) { + /* Return the size of a good frame or incomplete bad frame + * (dma_buf_read will clean the buffer descriptors in this case). */ + return rcvd; + } + ptdescr = (card->hw.rambase + cpc_readl(&ptdescr->next)); + } + return -1; +} + +/* + * dma_buf_write: writes a frame to the Tx DMA buffers + * NOTE: this function writes one frame at a time. + */ +static int dma_buf_write(pc300_t *card, int ch, u8 *ptdata, int len) +{ + int i, nchar; + volatile pcsca_bd_t __iomem *ptdescr; + int tosend = len; + u8 nbuf = ((len - 1) / BD_DEF_LEN) + 1; + + if (nbuf >= card->chan[ch].nfree_tx_bd) { + return -ENOMEM; + } + + for (i = 0; i < nbuf; i++) { + ptdescr = (card->hw.rambase + + TX_BD_ADDR(ch, card->chan[ch].tx_next_bd)); + nchar = cpc_min(BD_DEF_LEN, tosend); + if (cpc_readb(&ptdescr->status) & DST_OSB) { + memcpy_toio((card->hw.rambase + cpc_readl(&ptdescr->ptbuf)), + &ptdata[len - tosend], nchar); + cpc_writew(&ptdescr->len, nchar); + card->chan[ch].nfree_tx_bd--; + if ((i + 1) == nbuf) { + /* This must be the last BD to be used */ + cpc_writeb(&ptdescr->status, DST_EOM); + } else { + cpc_writeb(&ptdescr->status, 0); + } + } else { + return -ENOMEM; + } + tosend -= nchar; + card->chan[ch].tx_next_bd = + (card->chan[ch].tx_next_bd + 1) & (N_DMA_TX_BUF - 1); + } + /* If it gets to here, it means we have sent the whole frame */ + return 0; +} + +/* + * dma_buf_read: reads a frame from the Rx DMA buffers + * NOTE: this function reads one frame at a time. + */ +static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb) +{ + int nchar; + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + volatile pcsca_bd_t __iomem *ptdescr; + int rcvd = 0; + volatile u8 status; + + ptdescr = (card->hw.rambase + + RX_BD_ADDR(ch, chan->rx_first_bd)); + while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) { + nchar = cpc_readw(&ptdescr->len); + if ((status & (DST_OVR | DST_CRC | DST_RBIT | DST_SHRT | DST_ABT)) || + (nchar > BD_DEF_LEN)) { + + if (nchar > BD_DEF_LEN) + status |= DST_RBIT; + rcvd = -status; + /* Discard remaining descriptors used by the bad frame */ + while (chan->rx_first_bd != chan->rx_last_bd) { + cpc_writeb(&ptdescr->status, 0); + chan->rx_first_bd = (chan->rx_first_bd+1) & (N_DMA_RX_BUF-1); + if (status & DST_EOM) + break; + ptdescr = (card->hw.rambase + + cpc_readl(&ptdescr->next)); + status = cpc_readb(&ptdescr->status); + } + break; + } + if (nchar != 0) { + if (skb) { + memcpy_fromio(skb_put(skb, nchar), + (card->hw.rambase+cpc_readl(&ptdescr->ptbuf)),nchar); + } + rcvd += nchar; + } + cpc_writeb(&ptdescr->status, 0); + cpc_writeb(&ptdescr->len, 0); + chan->rx_first_bd = (chan->rx_first_bd + 1) & (N_DMA_RX_BUF - 1); + + if (status & DST_EOM) + break; + + ptdescr = (card->hw.rambase + cpc_readl(&ptdescr->next)); + } + + if (rcvd != 0) { + /* Update pointer */ + chan->rx_last_bd = (chan->rx_first_bd - 1) & (N_DMA_RX_BUF - 1); + /* Update EDA */ + cpc_writel(card->hw.scabase + DRX_REG(EDAL, ch), + RX_BD_ADDR(ch, chan->rx_last_bd)); + } + return rcvd; +} + +static void tx_dma_stop(pc300_t * card, int ch) +{ + void __iomem *scabase = card->hw.scabase; + u8 drr_ena_bit = 1 << (5 + 2 * ch); + u8 drr_rst_bit = 1 << (1 + 2 * ch); + + /* Disable DMA */ + cpc_writeb(scabase + DRR, drr_ena_bit); + cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit); +} + +static void rx_dma_stop(pc300_t * card, int ch) +{ + void __iomem *scabase = card->hw.scabase; + u8 drr_ena_bit = 1 << (4 + 2 * ch); + u8 drr_rst_bit = 1 << (2 * ch); + + /* Disable DMA */ + cpc_writeb(scabase + DRR, drr_ena_bit); + cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit); +} + +static void rx_dma_start(pc300_t * card, int ch) +{ + void __iomem *scabase = card->hw.scabase; + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + + /* Start DMA */ + cpc_writel(scabase + DRX_REG(CDAL, ch), + RX_BD_ADDR(ch, chan->rx_first_bd)); + if (cpc_readl(scabase + DRX_REG(CDAL,ch)) != + RX_BD_ADDR(ch, chan->rx_first_bd)) { + cpc_writel(scabase + DRX_REG(CDAL, ch), + RX_BD_ADDR(ch, chan->rx_first_bd)); + } + cpc_writel(scabase + DRX_REG(EDAL, ch), + RX_BD_ADDR(ch, chan->rx_last_bd)); + cpc_writew(scabase + DRX_REG(BFLL, ch), BD_DEF_LEN); + cpc_writeb(scabase + DSR_RX(ch), DSR_DE); + if (!(cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) { + cpc_writeb(scabase + DSR_RX(ch), DSR_DE); + } +} + +/*************************/ +/*** FALC Routines ***/ +/*************************/ +static void falc_issue_cmd(pc300_t *card, int ch, u8 cmd) +{ + void __iomem *falcbase = card->hw.falcbase; + unsigned long i = 0; + + while (cpc_readb(falcbase + F_REG(SIS, ch)) & SIS_CEC) { + if (i++ >= PC300_FALC_MAXLOOP) { + printk("%s: FALC command locked(cmd=0x%x).\n", + card->chan[ch].d.name, cmd); + break; + } + } + cpc_writeb(falcbase + F_REG(CMDR, ch), cmd); +} + +static void falc_intr_enable(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + + /* Interrupt pins are open-drain */ + cpc_writeb(falcbase + F_REG(IPC, ch), + cpc_readb(falcbase + F_REG(IPC, ch)) & ~IPC_IC0); + /* Conters updated each second */ + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_ECM); + /* Enable SEC and ES interrupts */ + cpc_writeb(falcbase + F_REG(IMR3, ch), + cpc_readb(falcbase + F_REG(IMR3, ch)) & ~(IMR3_SEC | IMR3_ES)); + if (conf->fr_mode == PC300_FR_UNFRAMED) { + cpc_writeb(falcbase + F_REG(IMR4, ch), + cpc_readb(falcbase + F_REG(IMR4, ch)) & ~(IMR4_LOS)); + } else { + cpc_writeb(falcbase + F_REG(IMR4, ch), + cpc_readb(falcbase + F_REG(IMR4, ch)) & + ~(IMR4_LFA | IMR4_AIS | IMR4_LOS | IMR4_SLIP)); + } + if (conf->media == IF_IFACE_T1) { + cpc_writeb(falcbase + F_REG(IMR3, ch), + cpc_readb(falcbase + F_REG(IMR3, ch)) & ~IMR3_LLBSC); + } else { + cpc_writeb(falcbase + F_REG(IPC, ch), + cpc_readb(falcbase + F_REG(IPC, ch)) | IPC_SCI); + if (conf->fr_mode == PC300_FR_UNFRAMED) { + cpc_writeb(falcbase + F_REG(IMR2, ch), + cpc_readb(falcbase + F_REG(IMR2, ch)) & ~(IMR2_LOS)); + } else { + cpc_writeb(falcbase + F_REG(IMR2, ch), + cpc_readb(falcbase + F_REG(IMR2, ch)) & + ~(IMR2_FAR | IMR2_LFA | IMR2_AIS | IMR2_LOS)); + if (pfalc->multiframe_mode) { + cpc_writeb(falcbase + F_REG(IMR2, ch), + cpc_readb(falcbase + F_REG(IMR2, ch)) & + ~(IMR2_T400MS | IMR2_MFAR)); + } else { + cpc_writeb(falcbase + F_REG(IMR2, ch), + cpc_readb(falcbase + F_REG(IMR2, ch)) | + IMR2_T400MS | IMR2_MFAR); + } + } + } +} + +static void falc_open_timeslot(pc300_t * card, int ch, int timeslot) +{ + void __iomem *falcbase = card->hw.falcbase; + u8 tshf = card->chan[ch].falc.offset; + + cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch), + cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) & + ~(0x80 >> ((timeslot - tshf) & 0x07))); + cpc_writeb(falcbase + F_REG((TTR1 + timeslot / 8), ch), + cpc_readb(falcbase + F_REG((TTR1 + timeslot / 8), ch)) | + (0x80 >> (timeslot & 0x07))); + cpc_writeb(falcbase + F_REG((RTR1 + timeslot / 8), ch), + cpc_readb(falcbase + F_REG((RTR1 + timeslot / 8), ch)) | + (0x80 >> (timeslot & 0x07))); +} + +static void falc_close_timeslot(pc300_t * card, int ch, int timeslot) +{ + void __iomem *falcbase = card->hw.falcbase; + u8 tshf = card->chan[ch].falc.offset; + + cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch), + cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) | + (0x80 >> ((timeslot - tshf) & 0x07))); + cpc_writeb(falcbase + F_REG((TTR1 + timeslot / 8), ch), + cpc_readb(falcbase + F_REG((TTR1 + timeslot / 8), ch)) & + ~(0x80 >> (timeslot & 0x07))); + cpc_writeb(falcbase + F_REG((RTR1 + timeslot / 8), ch), + cpc_readb(falcbase + F_REG((RTR1 + timeslot / 8), ch)) & + ~(0x80 >> (timeslot & 0x07))); +} + +static void falc_close_all_timeslots(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + void __iomem *falcbase = card->hw.falcbase; + + cpc_writeb(falcbase + F_REG(ICB1, ch), 0xff); + cpc_writeb(falcbase + F_REG(TTR1, ch), 0); + cpc_writeb(falcbase + F_REG(RTR1, ch), 0); + cpc_writeb(falcbase + F_REG(ICB2, ch), 0xff); + cpc_writeb(falcbase + F_REG(TTR2, ch), 0); + cpc_writeb(falcbase + F_REG(RTR2, ch), 0); + cpc_writeb(falcbase + F_REG(ICB3, ch), 0xff); + cpc_writeb(falcbase + F_REG(TTR3, ch), 0); + cpc_writeb(falcbase + F_REG(RTR3, ch), 0); + if (conf->media == IF_IFACE_E1) { + cpc_writeb(falcbase + F_REG(ICB4, ch), 0xff); + cpc_writeb(falcbase + F_REG(TTR4, ch), 0); + cpc_writeb(falcbase + F_REG(RTR4, ch), 0); + } +} + +static void falc_open_all_timeslots(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + void __iomem *falcbase = card->hw.falcbase; + + cpc_writeb(falcbase + F_REG(ICB1, ch), 0); + if (conf->fr_mode == PC300_FR_UNFRAMED) { + cpc_writeb(falcbase + F_REG(TTR1, ch), 0xff); + cpc_writeb(falcbase + F_REG(RTR1, ch), 0xff); + } else { + /* Timeslot 0 is never enabled */ + cpc_writeb(falcbase + F_REG(TTR1, ch), 0x7f); + cpc_writeb(falcbase + F_REG(RTR1, ch), 0x7f); + } + cpc_writeb(falcbase + F_REG(ICB2, ch), 0); + cpc_writeb(falcbase + F_REG(TTR2, ch), 0xff); + cpc_writeb(falcbase + F_REG(RTR2, ch), 0xff); + cpc_writeb(falcbase + F_REG(ICB3, ch), 0); + cpc_writeb(falcbase + F_REG(TTR3, ch), 0xff); + cpc_writeb(falcbase + F_REG(RTR3, ch), 0xff); + if (conf->media == IF_IFACE_E1) { + cpc_writeb(falcbase + F_REG(ICB4, ch), 0); + cpc_writeb(falcbase + F_REG(TTR4, ch), 0xff); + cpc_writeb(falcbase + F_REG(RTR4, ch), 0xff); + } else { + cpc_writeb(falcbase + F_REG(ICB4, ch), 0xff); + cpc_writeb(falcbase + F_REG(TTR4, ch), 0x80); + cpc_writeb(falcbase + F_REG(RTR4, ch), 0x80); + } +} + +static void falc_init_timeslot(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + falc_t *pfalc = (falc_t *) & chan->falc; + int tslot; + + for (tslot = 0; tslot < pfalc->num_channels; tslot++) { + if (conf->tslot_bitmap & (1 << tslot)) { + // Channel enabled + falc_open_timeslot(card, ch, tslot + 1); + } else { + // Channel disabled + falc_close_timeslot(card, ch, tslot + 1); + } + } +} + +static void falc_enable_comm(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + falc_t *pfalc = (falc_t *) & chan->falc; + + if (pfalc->full_bandwidth) { + falc_open_all_timeslots(card, ch); + } else { + falc_init_timeslot(card, ch); + } + // CTS/DCD ON + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) & + ~((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch))); +} + +static void falc_disable_comm(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + falc_t *pfalc = (falc_t *) & chan->falc; + + if (pfalc->loop_active != 2) { + falc_close_all_timeslots(card, ch); + } + // CTS/DCD OFF + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) | + ((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch))); +} + +static void falc_init_t1(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); + + /* Switch to T1 mode (PCM 24) */ + cpc_writeb(falcbase + F_REG(FMR1, ch), FMR1_PMOD); + + /* Wait 20 us for setup */ + udelay(20); + + /* Transmit Buffer Size (1 frame) */ + cpc_writeb(falcbase + F_REG(SIC1, ch), SIC1_XBS0); + + /* Clock mode */ + if (conf->phys_settings.clock_type == CLOCK_INT) { /* Master mode */ + cpc_writeb(falcbase + F_REG(LIM0, ch), + cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_MAS); + } else { /* Slave mode */ + cpc_writeb(falcbase + F_REG(LIM0, ch), + cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_MAS); + cpc_writeb(falcbase + F_REG(LOOP, ch), + cpc_readb(falcbase + F_REG(LOOP, ch)) & ~LOOP_RTM); + } + + cpc_writeb(falcbase + F_REG(IPC, ch), IPC_SCI); + cpc_writeb(falcbase + F_REG(FMR0, ch), + cpc_readb(falcbase + F_REG(FMR0, ch)) & + ~(FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1)); + + switch (conf->lcode) { + case PC300_LC_AMI: + cpc_writeb(falcbase + F_REG(FMR0, ch), + cpc_readb(falcbase + F_REG(FMR0, ch)) | + FMR0_XC1 | FMR0_RC1); + /* Clear Channel register to ON for all channels */ + cpc_writeb(falcbase + F_REG(CCB1, ch), 0xff); + cpc_writeb(falcbase + F_REG(CCB2, ch), 0xff); + cpc_writeb(falcbase + F_REG(CCB3, ch), 0xff); + break; + + case PC300_LC_B8ZS: + cpc_writeb(falcbase + F_REG(FMR0, ch), + cpc_readb(falcbase + F_REG(FMR0, ch)) | + FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1); + break; + + case PC300_LC_NRZ: + cpc_writeb(falcbase + F_REG(FMR0, ch), + cpc_readb(falcbase + F_REG(FMR0, ch)) | 0x00); + break; + } + + cpc_writeb(falcbase + F_REG(LIM0, ch), + cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_ELOS); + cpc_writeb(falcbase + F_REG(LIM0, ch), + cpc_readb(falcbase + F_REG(LIM0, ch)) & ~(LIM0_SCL1 | LIM0_SCL0)); + /* Set interface mode to 2 MBPS */ + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_IMOD); + + switch (conf->fr_mode) { + case PC300_FR_ESF: + pfalc->multiframe_mode = 0; + cpc_writeb(falcbase + F_REG(FMR4, ch), + cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_FM1); + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) | + FMR1_CRC | FMR1_EDL); + cpc_writeb(falcbase + F_REG(XDL1, ch), 0); + cpc_writeb(falcbase + F_REG(XDL2, ch), 0); + cpc_writeb(falcbase + F_REG(XDL3, ch), 0); + cpc_writeb(falcbase + F_REG(FMR0, ch), + cpc_readb(falcbase + F_REG(FMR0, ch)) & ~FMR0_SRAF); + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2,ch)) | FMR2_MCSP | FMR2_SSP); + break; + + case PC300_FR_D4: + pfalc->multiframe_mode = 1; + cpc_writeb(falcbase + F_REG(FMR4, ch), + cpc_readb(falcbase + F_REG(FMR4, ch)) & + ~(FMR4_FM1 | FMR4_FM0)); + cpc_writeb(falcbase + F_REG(FMR0, ch), + cpc_readb(falcbase + F_REG(FMR0, ch)) | FMR0_SRAF); + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_SSP); + break; + } + + /* Enable Automatic Resynchronization */ + cpc_writeb(falcbase + F_REG(FMR4, ch), + cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_AUTO); + + /* Transmit Automatic Remote Alarm */ + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA); + + /* Channel translation mode 1 : one to one */ + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_CTM); + + /* No signaling */ + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_SIGM); + cpc_writeb(falcbase + F_REG(FMR5, ch), + cpc_readb(falcbase + F_REG(FMR5, ch)) & + ~(FMR5_EIBR | FMR5_SRS)); + cpc_writeb(falcbase + F_REG(CCR1, ch), 0); + + cpc_writeb(falcbase + F_REG(LIM1, ch), + cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RIL0 | LIM1_RIL1); + + switch (conf->lbo) { + /* Provides proper Line Build Out */ + case PC300_LBO_0_DB: + cpc_writeb(falcbase + F_REG(LIM2, ch), (LIM2_LOS1 | dja)); + cpc_writeb(falcbase + F_REG(XPM0, ch), 0x5a); + cpc_writeb(falcbase + F_REG(XPM1, ch), 0x8f); + cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20); + break; + case PC300_LBO_7_5_DB: + cpc_writeb(falcbase + F_REG(LIM2, ch), (0x40 | LIM2_LOS1 | dja)); + cpc_writeb(falcbase + F_REG(XPM0, ch), 0x11); + cpc_writeb(falcbase + F_REG(XPM1, ch), 0x02); + cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20); + break; + case PC300_LBO_15_DB: + cpc_writeb(falcbase + F_REG(LIM2, ch), (0x80 | LIM2_LOS1 | dja)); + cpc_writeb(falcbase + F_REG(XPM0, ch), 0x8e); + cpc_writeb(falcbase + F_REG(XPM1, ch), 0x01); + cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20); + break; + case PC300_LBO_22_5_DB: + cpc_writeb(falcbase + F_REG(LIM2, ch), (0xc0 | LIM2_LOS1 | dja)); + cpc_writeb(falcbase + F_REG(XPM0, ch), 0x09); + cpc_writeb(falcbase + F_REG(XPM1, ch), 0x01); + cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20); + break; + } + + /* Transmit Clock-Slot Offset */ + cpc_writeb(falcbase + F_REG(XC0, ch), + cpc_readb(falcbase + F_REG(XC0, ch)) | 0x01); + /* Transmit Time-slot Offset */ + cpc_writeb(falcbase + F_REG(XC1, ch), 0x3e); + /* Receive Clock-Slot offset */ + cpc_writeb(falcbase + F_REG(RC0, ch), 0x05); + /* Receive Time-slot offset */ + cpc_writeb(falcbase + F_REG(RC1, ch), 0x00); + + /* LOS Detection after 176 consecutive 0s */ + cpc_writeb(falcbase + F_REG(PCDR, ch), 0x0a); + /* LOS Recovery after 22 ones in the time window of PCD */ + cpc_writeb(falcbase + F_REG(PCRR, ch), 0x15); + + cpc_writeb(falcbase + F_REG(IDLE, ch), 0x7f); + + if (conf->fr_mode == PC300_FR_ESF_JAPAN) { + cpc_writeb(falcbase + F_REG(RC1, ch), + cpc_readb(falcbase + F_REG(RC1, ch)) | 0x80); + } + + falc_close_all_timeslots(card, ch); +} + +static void falc_init_e1(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); + + /* Switch to E1 mode (PCM 30) */ + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_PMOD); + + /* Clock mode */ + if (conf->phys_settings.clock_type == CLOCK_INT) { /* Master mode */ + cpc_writeb(falcbase + F_REG(LIM0, ch), + cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_MAS); + } else { /* Slave mode */ + cpc_writeb(falcbase + F_REG(LIM0, ch), + cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_MAS); + } + cpc_writeb(falcbase + F_REG(LOOP, ch), + cpc_readb(falcbase + F_REG(LOOP, ch)) & ~LOOP_SFM); + + cpc_writeb(falcbase + F_REG(IPC, ch), IPC_SCI); + cpc_writeb(falcbase + F_REG(FMR0, ch), + cpc_readb(falcbase + F_REG(FMR0, ch)) & + ~(FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1)); + + switch (conf->lcode) { + case PC300_LC_AMI: + cpc_writeb(falcbase + F_REG(FMR0, ch), + cpc_readb(falcbase + F_REG(FMR0, ch)) | + FMR0_XC1 | FMR0_RC1); + break; + + case PC300_LC_HDB3: + cpc_writeb(falcbase + F_REG(FMR0, ch), + cpc_readb(falcbase + F_REG(FMR0, ch)) | + FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1); + break; + + case PC300_LC_NRZ: + break; + } + + cpc_writeb(falcbase + F_REG(LIM0, ch), + cpc_readb(falcbase + F_REG(LIM0, ch)) & ~(LIM0_SCL1 | LIM0_SCL0)); + /* Set interface mode to 2 MBPS */ + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_IMOD); + + cpc_writeb(falcbase + F_REG(XPM0, ch), 0x18); + cpc_writeb(falcbase + F_REG(XPM1, ch), 0x03); + cpc_writeb(falcbase + F_REG(XPM2, ch), 0x00); + + switch (conf->fr_mode) { + case PC300_FR_MF_CRC4: + pfalc->multiframe_mode = 1; + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_XFS); + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_RFS1); + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_RFS0); + cpc_writeb(falcbase + F_REG(FMR3, ch), + cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_EXTIW); + + /* MultiFrame Resynchronization */ + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_MFCS); + + /* Automatic Loss of Multiframe > 914 CRC errors */ + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_ALMF); + + /* S1 and SI1/SI2 spare Bits set to 1 */ + cpc_writeb(falcbase + F_REG(XSP, ch), + cpc_readb(falcbase + F_REG(XSP, ch)) & ~XSP_AXS); + cpc_writeb(falcbase + F_REG(XSP, ch), + cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_EBP); + cpc_writeb(falcbase + F_REG(XSP, ch), + cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_XS13 | XSP_XS15); + + /* Automatic Force Resynchronization */ + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_AFR); + + /* Transmit Automatic Remote Alarm */ + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA); + + /* Transmit Spare Bits for National Use (Y, Sn, Sa) */ + cpc_writeb(falcbase + F_REG(XSW, ch), + cpc_readb(falcbase + F_REG(XSW, ch)) | + XSW_XY0 | XSW_XY1 | XSW_XY2 | XSW_XY3 | XSW_XY4); + break; + + case PC300_FR_MF_NON_CRC4: + case PC300_FR_D4: + pfalc->multiframe_mode = 0; + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_XFS); + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2, ch)) & + ~(FMR2_RFS1 | FMR2_RFS0)); + cpc_writeb(falcbase + F_REG(XSW, ch), + cpc_readb(falcbase + F_REG(XSW, ch)) | XSW_XSIS); + cpc_writeb(falcbase + F_REG(XSP, ch), + cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_XSIF); + + /* Automatic Force Resynchronization */ + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_AFR); + + /* Transmit Automatic Remote Alarm */ + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA); + + /* Transmit Spare Bits for National Use (Y, Sn, Sa) */ + cpc_writeb(falcbase + F_REG(XSW, ch), + cpc_readb(falcbase + F_REG(XSW, ch)) | + XSW_XY0 | XSW_XY1 | XSW_XY2 | XSW_XY3 | XSW_XY4); + break; + + case PC300_FR_UNFRAMED: + pfalc->multiframe_mode = 0; + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_XFS); + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2, ch)) & + ~(FMR2_RFS1 | FMR2_RFS0)); + cpc_writeb(falcbase + F_REG(XSP, ch), + cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_TT0); + cpc_writeb(falcbase + F_REG(XSW, ch), + cpc_readb(falcbase + F_REG(XSW, ch)) & + ~(XSW_XTM|XSW_XY0|XSW_XY1|XSW_XY2|XSW_XY3|XSW_XY4)); + cpc_writeb(falcbase + F_REG(TSWM, ch), 0xff); + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2, ch)) | + (FMR2_RTM | FMR2_DAIS)); + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_AXRA); + cpc_writeb(falcbase + F_REG(FMR1, ch), + cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_AFR); + pfalc->sync = 1; + cpc_writeb(falcbase + card->hw.cpld_reg2, + cpc_readb(falcbase + card->hw.cpld_reg2) | + (CPLD_REG2_FALC_LED2 << (2 * ch))); + break; + } + + /* No signaling */ + cpc_writeb(falcbase + F_REG(XSP, ch), + cpc_readb(falcbase + F_REG(XSP, ch)) & ~XSP_CASEN); + cpc_writeb(falcbase + F_REG(CCR1, ch), 0); + + cpc_writeb(falcbase + F_REG(LIM1, ch), + cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RIL0 | LIM1_RIL1); + cpc_writeb(falcbase + F_REG(LIM2, ch), (LIM2_LOS1 | dja)); + + /* Transmit Clock-Slot Offset */ + cpc_writeb(falcbase + F_REG(XC0, ch), + cpc_readb(falcbase + F_REG(XC0, ch)) | 0x01); + /* Transmit Time-slot Offset */ + cpc_writeb(falcbase + F_REG(XC1, ch), 0x3e); + /* Receive Clock-Slot offset */ + cpc_writeb(falcbase + F_REG(RC0, ch), 0x05); + /* Receive Time-slot offset */ + cpc_writeb(falcbase + F_REG(RC1, ch), 0x00); + + /* LOS Detection after 176 consecutive 0s */ + cpc_writeb(falcbase + F_REG(PCDR, ch), 0x0a); + /* LOS Recovery after 22 ones in the time window of PCD */ + cpc_writeb(falcbase + F_REG(PCRR, ch), 0x15); + + cpc_writeb(falcbase + F_REG(IDLE, ch), 0x7f); + + falc_close_all_timeslots(card, ch); +} + +static void falc_init_hdlc(pc300_t * card, int ch) +{ + void __iomem *falcbase = card->hw.falcbase; + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + + /* Enable transparent data transfer */ + if (conf->fr_mode == PC300_FR_UNFRAMED) { + cpc_writeb(falcbase + F_REG(MODE, ch), 0); + } else { + cpc_writeb(falcbase + F_REG(MODE, ch), + cpc_readb(falcbase + F_REG(MODE, ch)) | + (MODE_HRAC | MODE_MDS2)); + cpc_writeb(falcbase + F_REG(RAH2, ch), 0xff); + cpc_writeb(falcbase + F_REG(RAH1, ch), 0xff); + cpc_writeb(falcbase + F_REG(RAL2, ch), 0xff); + cpc_writeb(falcbase + F_REG(RAL1, ch), 0xff); + } + + /* Tx/Rx reset */ + falc_issue_cmd(card, ch, CMDR_RRES | CMDR_XRES | CMDR_SRES); + + /* Enable interrupt sources */ + falc_intr_enable(card, ch); +} + +static void te_config(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + u8 dummy; + unsigned long flags; + + memset(pfalc, 0, sizeof(falc_t)); + switch (conf->media) { + case IF_IFACE_T1: + pfalc->num_channels = NUM_OF_T1_CHANNELS; + pfalc->offset = 1; + break; + case IF_IFACE_E1: + pfalc->num_channels = NUM_OF_E1_CHANNELS; + pfalc->offset = 0; + break; + } + if (conf->tslot_bitmap == 0xffffffffUL) + pfalc->full_bandwidth = 1; + else + pfalc->full_bandwidth = 0; + + CPC_LOCK(card, flags); + /* Reset the FALC chip */ + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) | + (CPLD_REG1_FALC_RESET << (2 * ch))); + udelay(10000); + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) & + ~(CPLD_REG1_FALC_RESET << (2 * ch))); + + if (conf->media == IF_IFACE_T1) { + falc_init_t1(card, ch); + } else { + falc_init_e1(card, ch); + } + falc_init_hdlc(card, ch); + if (conf->rx_sens == PC300_RX_SENS_SH) { + cpc_writeb(falcbase + F_REG(LIM0, ch), + cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_EQON); + } else { + cpc_writeb(falcbase + F_REG(LIM0, ch), + cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_EQON); + } + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) | + ((CPLD_REG2_FALC_TX_CLK | CPLD_REG2_FALC_RX_CLK) << (2 * ch))); + + /* Clear all interrupt registers */ + dummy = cpc_readb(falcbase + F_REG(FISR0, ch)) + + cpc_readb(falcbase + F_REG(FISR1, ch)) + + cpc_readb(falcbase + F_REG(FISR2, ch)) + + cpc_readb(falcbase + F_REG(FISR3, ch)); + CPC_UNLOCK(card, flags); +} + +static void falc_check_status(pc300_t * card, int ch, unsigned char frs0) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + + /* Verify LOS */ + if (frs0 & FRS0_LOS) { + if (!pfalc->red_alarm) { + pfalc->red_alarm = 1; + pfalc->los++; + if (!pfalc->blue_alarm) { + // EVENT_FALC_ABNORMAL + if (conf->media == IF_IFACE_T1) { + /* Disable this interrupt as it may otherwise interfere + * with other working boards. */ + cpc_writeb(falcbase + F_REG(IMR0, ch), + cpc_readb(falcbase + F_REG(IMR0, ch)) + | IMR0_PDEN); + } + falc_disable_comm(card, ch); + // EVENT_FALC_ABNORMAL + } + } + } else { + if (pfalc->red_alarm) { + pfalc->red_alarm = 0; + pfalc->losr++; + } + } + + if (conf->fr_mode != PC300_FR_UNFRAMED) { + /* Verify AIS alarm */ + if (frs0 & FRS0_AIS) { + if (!pfalc->blue_alarm) { + pfalc->blue_alarm = 1; + pfalc->ais++; + // EVENT_AIS + if (conf->media == IF_IFACE_T1) { + /* Disable this interrupt as it may otherwise interfere with other working boards. */ + cpc_writeb(falcbase + F_REG(IMR0, ch), + cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN); + } + falc_disable_comm(card, ch); + // EVENT_AIS + } + } else { + pfalc->blue_alarm = 0; + } + + /* Verify LFA */ + if (frs0 & FRS0_LFA) { + if (!pfalc->loss_fa) { + pfalc->loss_fa = 1; + pfalc->lfa++; + if (!pfalc->blue_alarm && !pfalc->red_alarm) { + // EVENT_FALC_ABNORMAL + if (conf->media == IF_IFACE_T1) { + /* Disable this interrupt as it may otherwise + * interfere with other working boards. */ + cpc_writeb(falcbase + F_REG(IMR0, ch), + cpc_readb(falcbase + F_REG(IMR0, ch)) + | IMR0_PDEN); + } + falc_disable_comm(card, ch); + // EVENT_FALC_ABNORMAL + } + } + } else { + if (pfalc->loss_fa) { + pfalc->loss_fa = 0; + pfalc->farec++; + } + } + + /* Verify LMFA */ + if (pfalc->multiframe_mode && (frs0 & FRS0_LMFA)) { + /* D4 or CRC4 frame mode */ + if (!pfalc->loss_mfa) { + pfalc->loss_mfa = 1; + pfalc->lmfa++; + if (!pfalc->blue_alarm && !pfalc->red_alarm && + !pfalc->loss_fa) { + // EVENT_FALC_ABNORMAL + if (conf->media == IF_IFACE_T1) { + /* Disable this interrupt as it may otherwise + * interfere with other working boards. */ + cpc_writeb(falcbase + F_REG(IMR0, ch), + cpc_readb(falcbase + F_REG(IMR0, ch)) + | IMR0_PDEN); + } + falc_disable_comm(card, ch); + // EVENT_FALC_ABNORMAL + } + } + } else { + pfalc->loss_mfa = 0; + } + + /* Verify Remote Alarm */ + if (frs0 & FRS0_RRA) { + if (!pfalc->yellow_alarm) { + pfalc->yellow_alarm = 1; + pfalc->rai++; + if (pfalc->sync) { + // EVENT_RAI + falc_disable_comm(card, ch); + // EVENT_RAI + } + } + } else { + pfalc->yellow_alarm = 0; + } + } /* if !PC300_UNFRAMED */ + + if (pfalc->red_alarm || pfalc->loss_fa || + pfalc->loss_mfa || pfalc->blue_alarm) { + if (pfalc->sync) { + pfalc->sync = 0; + chan->d.line_off++; + cpc_writeb(falcbase + card->hw.cpld_reg2, + cpc_readb(falcbase + card->hw.cpld_reg2) & + ~(CPLD_REG2_FALC_LED2 << (2 * ch))); + } + } else { + if (!pfalc->sync) { + pfalc->sync = 1; + chan->d.line_on++; + cpc_writeb(falcbase + card->hw.cpld_reg2, + cpc_readb(falcbase + card->hw.cpld_reg2) | + (CPLD_REG2_FALC_LED2 << (2 * ch))); + } + } + + if (pfalc->sync && !pfalc->yellow_alarm) { + if (!pfalc->active) { + // EVENT_FALC_NORMAL + if (pfalc->loop_active) { + return; + } + if (conf->media == IF_IFACE_T1) { + cpc_writeb(falcbase + F_REG(IMR0, ch), + cpc_readb(falcbase + F_REG(IMR0, ch)) & ~IMR0_PDEN); + } + falc_enable_comm(card, ch); + // EVENT_FALC_NORMAL + pfalc->active = 1; + } + } else { + if (pfalc->active) { + pfalc->active = 0; + } + } +} + +static void falc_update_stats(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + u16 counter; + + counter = cpc_readb(falcbase + F_REG(FECL, ch)); + counter |= cpc_readb(falcbase + F_REG(FECH, ch)) << 8; + pfalc->fec += counter; + + counter = cpc_readb(falcbase + F_REG(CVCL, ch)); + counter |= cpc_readb(falcbase + F_REG(CVCH, ch)) << 8; + pfalc->cvc += counter; + + counter = cpc_readb(falcbase + F_REG(CECL, ch)); + counter |= cpc_readb(falcbase + F_REG(CECH, ch)) << 8; + pfalc->cec += counter; + + counter = cpc_readb(falcbase + F_REG(EBCL, ch)); + counter |= cpc_readb(falcbase + F_REG(EBCH, ch)) << 8; + pfalc->ebc += counter; + + if (cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) { + mdelay(10); + counter = cpc_readb(falcbase + F_REG(BECL, ch)); + counter |= cpc_readb(falcbase + F_REG(BECH, ch)) << 8; + pfalc->bec += counter; + + if (((conf->media == IF_IFACE_T1) && + (cpc_readb(falcbase + F_REG(FRS1, ch)) & FRS1_LLBAD) && + (!(cpc_readb(falcbase + F_REG(FRS1, ch)) & FRS1_PDEN))) || + ((conf->media == IF_IFACE_E1) && + (cpc_readb(falcbase + F_REG(RSP, ch)) & RSP_LLBAD))) { + pfalc->prbs = 2; + } else { + pfalc->prbs = 1; + } + } +} + +/*---------------------------------------------------------------------------- + * falc_remote_loop + *---------------------------------------------------------------------------- + * Description: In the remote loopback mode the clock and data recovered + * from the line inputs RL1/2 or RDIP/RDIN are routed back + * to the line outputs XL1/2 or XDOP/XDON via the analog + * transmitter. As in normal mode they are processed by + * the synchronizer and then sent to the system interface. + *---------------------------------------------------------------------------- + */ +static void falc_remote_loop(pc300_t * card, int ch, int loop_on) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + + if (loop_on) { + // EVENT_FALC_ABNORMAL + if (conf->media == IF_IFACE_T1) { + /* Disable this interrupt as it may otherwise interfere with + * other working boards. */ + cpc_writeb(falcbase + F_REG(IMR0, ch), + cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN); + } + falc_disable_comm(card, ch); + // EVENT_FALC_ABNORMAL + cpc_writeb(falcbase + F_REG(LIM1, ch), + cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RL); + pfalc->loop_active = 1; + } else { + cpc_writeb(falcbase + F_REG(LIM1, ch), + cpc_readb(falcbase + F_REG(LIM1, ch)) & ~LIM1_RL); + pfalc->sync = 0; + cpc_writeb(falcbase + card->hw.cpld_reg2, + cpc_readb(falcbase + card->hw.cpld_reg2) & + ~(CPLD_REG2_FALC_LED2 << (2 * ch))); + pfalc->active = 0; + falc_issue_cmd(card, ch, CMDR_XRES); + pfalc->loop_active = 0; + } +} + +/*---------------------------------------------------------------------------- + * falc_local_loop + *---------------------------------------------------------------------------- + * Description: The local loopback mode disconnects the receive lines + * RL1/RL2 resp. RDIP/RDIN from the receiver. Instead of the + * signals coming from the line the data provided by system + * interface are routed through the analog receiver back to + * the system interface. The unipolar bit stream will be + * undisturbed transmitted on the line. Receiver and transmitter + * coding must be identical. + *---------------------------------------------------------------------------- + */ +static void falc_local_loop(pc300_t * card, int ch, int loop_on) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + + if (loop_on) { + cpc_writeb(falcbase + F_REG(LIM0, ch), + cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_LL); + pfalc->loop_active = 1; + } else { + cpc_writeb(falcbase + F_REG(LIM0, ch), + cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_LL); + pfalc->loop_active = 0; + } +} + +/*---------------------------------------------------------------------------- + * falc_payload_loop + *---------------------------------------------------------------------------- + * Description: This routine allows to enable/disable payload loopback. + * When the payload loop is activated, the received 192 bits + * of payload data will be looped back to the transmit + * direction. The framing bits, CRC6 and DL bits are not + * looped. They are originated by the FALC-LH transmitter. + *---------------------------------------------------------------------------- + */ +static void falc_payload_loop(pc300_t * card, int ch, int loop_on) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + + if (loop_on) { + // EVENT_FALC_ABNORMAL + if (conf->media == IF_IFACE_T1) { + /* Disable this interrupt as it may otherwise interfere with + * other working boards. */ + cpc_writeb(falcbase + F_REG(IMR0, ch), + cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN); + } + falc_disable_comm(card, ch); + // EVENT_FALC_ABNORMAL + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_PLB); + if (conf->media == IF_IFACE_T1) { + cpc_writeb(falcbase + F_REG(FMR4, ch), + cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_TM); + } else { + cpc_writeb(falcbase + F_REG(FMR5, ch), + cpc_readb(falcbase + F_REG(FMR5, ch)) | XSP_TT0); + } + falc_open_all_timeslots(card, ch); + pfalc->loop_active = 2; + } else { + cpc_writeb(falcbase + F_REG(FMR2, ch), + cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_PLB); + if (conf->media == IF_IFACE_T1) { + cpc_writeb(falcbase + F_REG(FMR4, ch), + cpc_readb(falcbase + F_REG(FMR4, ch)) & ~FMR4_TM); + } else { + cpc_writeb(falcbase + F_REG(FMR5, ch), + cpc_readb(falcbase + F_REG(FMR5, ch)) & ~XSP_TT0); + } + pfalc->sync = 0; + cpc_writeb(falcbase + card->hw.cpld_reg2, + cpc_readb(falcbase + card->hw.cpld_reg2) & + ~(CPLD_REG2_FALC_LED2 << (2 * ch))); + pfalc->active = 0; + falc_issue_cmd(card, ch, CMDR_XRES); + pfalc->loop_active = 0; + } +} + +/*---------------------------------------------------------------------------- + * turn_off_xlu + *---------------------------------------------------------------------------- + * Description: Turns XLU bit off in the proper register + *---------------------------------------------------------------------------- + */ +static void turn_off_xlu(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + void __iomem *falcbase = card->hw.falcbase; + + if (conf->media == IF_IFACE_T1) { + cpc_writeb(falcbase + F_REG(FMR5, ch), + cpc_readb(falcbase + F_REG(FMR5, ch)) & ~FMR5_XLU); + } else { + cpc_writeb(falcbase + F_REG(FMR3, ch), + cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_XLU); + } +} + +/*---------------------------------------------------------------------------- + * turn_off_xld + *---------------------------------------------------------------------------- + * Description: Turns XLD bit off in the proper register + *---------------------------------------------------------------------------- + */ +static void turn_off_xld(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + void __iomem *falcbase = card->hw.falcbase; + + if (conf->media == IF_IFACE_T1) { + cpc_writeb(falcbase + F_REG(FMR5, ch), + cpc_readb(falcbase + F_REG(FMR5, ch)) & ~FMR5_XLD); + } else { + cpc_writeb(falcbase + F_REG(FMR3, ch), + cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_XLD); + } +} + +/*---------------------------------------------------------------------------- + * falc_generate_loop_up_code + *---------------------------------------------------------------------------- + * Description: This routine writes the proper FALC chip register in order + * to generate a LOOP activation code over a T1/E1 line. + *---------------------------------------------------------------------------- + */ +static void falc_generate_loop_up_code(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + + if (conf->media == IF_IFACE_T1) { + cpc_writeb(falcbase + F_REG(FMR5, ch), + cpc_readb(falcbase + F_REG(FMR5, ch)) | FMR5_XLU); + } else { + cpc_writeb(falcbase + F_REG(FMR3, ch), + cpc_readb(falcbase + F_REG(FMR3, ch)) | FMR3_XLU); + } + // EVENT_FALC_ABNORMAL + if (conf->media == IF_IFACE_T1) { + /* Disable this interrupt as it may otherwise interfere with + * other working boards. */ + cpc_writeb(falcbase + F_REG(IMR0, ch), + cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN); + } + falc_disable_comm(card, ch); + // EVENT_FALC_ABNORMAL + pfalc->loop_gen = 1; +} + +/*---------------------------------------------------------------------------- + * falc_generate_loop_down_code + *---------------------------------------------------------------------------- + * Description: This routine writes the proper FALC chip register in order + * to generate a LOOP deactivation code over a T1/E1 line. + *---------------------------------------------------------------------------- + */ +static void falc_generate_loop_down_code(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + + if (conf->media == IF_IFACE_T1) { + cpc_writeb(falcbase + F_REG(FMR5, ch), + cpc_readb(falcbase + F_REG(FMR5, ch)) | FMR5_XLD); + } else { + cpc_writeb(falcbase + F_REG(FMR3, ch), + cpc_readb(falcbase + F_REG(FMR3, ch)) | FMR3_XLD); + } + pfalc->sync = 0; + cpc_writeb(falcbase + card->hw.cpld_reg2, + cpc_readb(falcbase + card->hw.cpld_reg2) & + ~(CPLD_REG2_FALC_LED2 << (2 * ch))); + pfalc->active = 0; +//? falc_issue_cmd(card, ch, CMDR_XRES); + pfalc->loop_gen = 0; +} + +/*---------------------------------------------------------------------------- + * falc_pattern_test + *---------------------------------------------------------------------------- + * Description: This routine generates a pattern code and checks + * it on the reception side. + *---------------------------------------------------------------------------- + */ +static void falc_pattern_test(pc300_t * card, int ch, unsigned int activate) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + + if (activate) { + pfalc->prbs = 1; + pfalc->bec = 0; + if (conf->media == IF_IFACE_T1) { + /* Disable local loop activation/deactivation detect */ + cpc_writeb(falcbase + F_REG(IMR3, ch), + cpc_readb(falcbase + F_REG(IMR3, ch)) | IMR3_LLBSC); + } else { + /* Disable local loop activation/deactivation detect */ + cpc_writeb(falcbase + F_REG(IMR1, ch), + cpc_readb(falcbase + F_REG(IMR1, ch)) | IMR1_LLBSC); + } + /* Activates generation and monitoring of PRBS + * (Pseudo Random Bit Sequence) */ + cpc_writeb(falcbase + F_REG(LCR1, ch), + cpc_readb(falcbase + F_REG(LCR1, ch)) | LCR1_EPRM | LCR1_XPRBS); + } else { + pfalc->prbs = 0; + /* Deactivates generation and monitoring of PRBS + * (Pseudo Random Bit Sequence) */ + cpc_writeb(falcbase + F_REG(LCR1, ch), + cpc_readb(falcbase+F_REG(LCR1,ch)) & ~(LCR1_EPRM | LCR1_XPRBS)); + if (conf->media == IF_IFACE_T1) { + /* Enable local loop activation/deactivation detect */ + cpc_writeb(falcbase + F_REG(IMR3, ch), + cpc_readb(falcbase + F_REG(IMR3, ch)) & ~IMR3_LLBSC); + } else { + /* Enable local loop activation/deactivation detect */ + cpc_writeb(falcbase + F_REG(IMR1, ch), + cpc_readb(falcbase + F_REG(IMR1, ch)) & ~IMR1_LLBSC); + } + } +} + +/*---------------------------------------------------------------------------- + * falc_pattern_test_error + *---------------------------------------------------------------------------- + * Description: This routine returns the bit error counter value + *---------------------------------------------------------------------------- + */ +static u16 falc_pattern_test_error(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + falc_t *pfalc = (falc_t *) & chan->falc; + + return pfalc->bec; +} + +/**********************************/ +/*** Net Interface Routines ***/ +/**********************************/ + +static void +cpc_trace(struct net_device *dev, struct sk_buff *skb_main, char rx_tx) +{ + struct sk_buff *skb; + + if ((skb = dev_alloc_skb(10 + skb_main->len)) == NULL) { + printk("%s: out of memory\n", dev->name); + return; + } + skb_put(skb, 10 + skb_main->len); + + skb->dev = dev; + skb->protocol = htons(ETH_P_CUST); + skb_reset_mac_header(skb); + skb->pkt_type = PACKET_HOST; + skb->len = 10 + skb_main->len; + + skb_copy_to_linear_data(skb, dev->name, 5); + skb->data[5] = '['; + skb->data[6] = rx_tx; + skb->data[7] = ']'; + skb->data[8] = ':'; + skb->data[9] = ' '; + skb_copy_from_linear_data(skb_main, &skb->data[10], skb_main->len); + + netif_rx(skb); +} + +static void cpc_tx_timeout(struct net_device *dev) +{ + pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv; + pc300ch_t *chan = (pc300ch_t *) d->chan; + pc300_t *card = (pc300_t *) chan->card; + int ch = chan->channel; + unsigned long flags; + u8 ilar; + + dev->stats.tx_errors++; + dev->stats.tx_aborted_errors++; + CPC_LOCK(card, flags); + if ((ilar = cpc_readb(card->hw.scabase + ILAR)) != 0) { + printk("%s: ILAR=0x%x\n", dev->name, ilar); + cpc_writeb(card->hw.scabase + ILAR, ilar); + cpc_writeb(card->hw.scabase + DMER, 0x80); + } + if (card->hw.type == PC300_TE) { + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) & + ~(CPLD_REG2_FALC_LED1 << (2 * ch))); + } + dev->trans_start = jiffies; /* prevent tx timeout */ + CPC_UNLOCK(card, flags); + netif_wake_queue(dev); +} + +static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev) +{ + pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv; + pc300ch_t *chan = (pc300ch_t *) d->chan; + pc300_t *card = (pc300_t *) chan->card; + int ch = chan->channel; + unsigned long flags; +#ifdef PC300_DEBUG_TX + int i; +#endif + + if (!netif_carrier_ok(dev)) { + /* DCD must be OFF: drop packet */ + dev_kfree_skb(skb); + dev->stats.tx_errors++; + dev->stats.tx_carrier_errors++; + return 0; + } else if (cpc_readb(card->hw.scabase + M_REG(ST3, ch)) & ST3_DCD) { + printk("%s: DCD is OFF. Going administrative down.\n", dev->name); + dev->stats.tx_errors++; + dev->stats.tx_carrier_errors++; + dev_kfree_skb(skb); + netif_carrier_off(dev); + CPC_LOCK(card, flags); + cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_BUF_CLR); + if (card->hw.type == PC300_TE) { + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) & + ~(CPLD_REG2_FALC_LED1 << (2 * ch))); + } + CPC_UNLOCK(card, flags); + netif_wake_queue(dev); + return 0; + } + + /* Write buffer to DMA buffers */ + if (dma_buf_write(card, ch, (u8 *)skb->data, skb->len) != 0) { +// printk("%s: write error. Dropping TX packet.\n", dev->name); + netif_stop_queue(dev); + dev_kfree_skb(skb); + dev->stats.tx_errors++; + dev->stats.tx_dropped++; + return 0; + } +#ifdef PC300_DEBUG_TX + printk("%s T:", dev->name); + for (i = 0; i < skb->len; i++) + printk(" %02x", *(skb->data + i)); + printk("\n"); +#endif + + if (d->trace_on) { + cpc_trace(dev, skb, 'T'); + } + + /* Start transmission */ + CPC_LOCK(card, flags); + /* verify if it has more than one free descriptor */ + if (card->chan[ch].nfree_tx_bd <= 1) { + /* don't have so stop the queue */ + netif_stop_queue(dev); + } + cpc_writel(card->hw.scabase + DTX_REG(EDAL, ch), + TX_BD_ADDR(ch, chan->tx_next_bd)); + cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_ENA); + cpc_writeb(card->hw.scabase + DSR_TX(ch), DSR_DE); + if (card->hw.type == PC300_TE) { + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) | + (CPLD_REG2_FALC_LED1 << (2 * ch))); + } + CPC_UNLOCK(card, flags); + dev_kfree_skb(skb); + + return 0; +} + +static void cpc_net_rx(struct net_device *dev) +{ + pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv; + pc300ch_t *chan = (pc300ch_t *) d->chan; + pc300_t *card = (pc300_t *) chan->card; + int ch = chan->channel; +#ifdef PC300_DEBUG_RX + int i; +#endif + int rxb; + struct sk_buff *skb; + + while (1) { + if ((rxb = dma_get_rx_frame_size(card, ch)) == -1) + return; + + if (!netif_carrier_ok(dev)) { + /* DCD must be OFF: drop packet */ + printk("%s : DCD is OFF - drop %d rx bytes\n", dev->name, rxb); + skb = NULL; + } else { + if (rxb > (dev->mtu + 40)) { /* add headers */ + printk("%s : MTU exceeded %d\n", dev->name, rxb); + skb = NULL; + } else { + skb = dev_alloc_skb(rxb); + if (skb == NULL) { + printk("%s: Memory squeeze!!\n", dev->name); + return; + } + skb->dev = dev; + } + } + + if (((rxb = dma_buf_read(card, ch, skb)) <= 0) || (skb == NULL)) { +#ifdef PC300_DEBUG_RX + printk("%s: rxb = %x\n", dev->name, rxb); +#endif + if ((skb == NULL) && (rxb > 0)) { + /* rxb > dev->mtu */ + dev->stats.rx_errors++; + dev->stats.rx_length_errors++; + continue; + } + + if (rxb < 0) { /* Invalid frame */ + rxb = -rxb; + if (rxb & DST_OVR) { + dev->stats.rx_errors++; + dev->stats.rx_fifo_errors++; + } + if (rxb & DST_CRC) { + dev->stats.rx_errors++; + dev->stats.rx_crc_errors++; + } + if (rxb & (DST_RBIT | DST_SHRT | DST_ABT)) { + dev->stats.rx_errors++; + dev->stats.rx_frame_errors++; + } + } + if (skb) { + dev_kfree_skb_irq(skb); + } + continue; + } + + dev->stats.rx_bytes += rxb; + +#ifdef PC300_DEBUG_RX + printk("%s R:", dev->name); + for (i = 0; i < skb->len; i++) + printk(" %02x", *(skb->data + i)); + printk("\n"); +#endif + if (d->trace_on) { + cpc_trace(dev, skb, 'R'); + } + dev->stats.rx_packets++; + skb->protocol = hdlc_type_trans(skb, dev); + netif_rx(skb); + } +} + +/************************************/ +/*** PC300 Interrupt Routines ***/ +/************************************/ +static void sca_tx_intr(pc300dev_t *dev) +{ + pc300ch_t *chan = (pc300ch_t *)dev->chan; + pc300_t *card = (pc300_t *)chan->card; + int ch = chan->channel; + volatile pcsca_bd_t __iomem * ptdescr; + + /* Clean up descriptors from previous transmission */ + ptdescr = (card->hw.rambase + + TX_BD_ADDR(ch,chan->tx_first_bd)); + while ((cpc_readl(card->hw.scabase + DTX_REG(CDAL,ch)) != + TX_BD_ADDR(ch,chan->tx_first_bd)) && + (cpc_readb(&ptdescr->status) & DST_OSB)) { + dev->dev->stats.tx_packets++; + dev->dev->stats.tx_bytes += cpc_readw(&ptdescr->len); + cpc_writeb(&ptdescr->status, DST_OSB); + cpc_writew(&ptdescr->len, 0); + chan->nfree_tx_bd++; + chan->tx_first_bd = (chan->tx_first_bd + 1) & (N_DMA_TX_BUF - 1); + ptdescr = (card->hw.rambase + TX_BD_ADDR(ch,chan->tx_first_bd)); + } + +#ifdef CONFIG_PC300_MLPPP + if (chan->conf.proto == PC300_PROTO_MLPPP) { + cpc_tty_trigger_poll(dev); + } else { +#endif + /* Tell the upper layer we are ready to transmit more packets */ + netif_wake_queue(dev->dev); +#ifdef CONFIG_PC300_MLPPP + } +#endif +} + +static void sca_intr(pc300_t * card) +{ + void __iomem *scabase = card->hw.scabase; + volatile u32 status; + int ch; + int intr_count = 0; + unsigned char dsr_rx; + + while ((status = cpc_readl(scabase + ISR0)) != 0) { + for (ch = 0; ch < card->hw.nchan; ch++) { + pc300ch_t *chan = &card->chan[ch]; + pc300dev_t *d = &chan->d; + struct net_device *dev = d->dev; + + spin_lock(&card->card_lock); + + /**** Reception ****/ + if (status & IR0_DRX((IR0_DMIA | IR0_DMIB), ch)) { + u8 drx_stat = cpc_readb(scabase + DSR_RX(ch)); + + /* Clear RX interrupts */ + cpc_writeb(scabase + DSR_RX(ch), drx_stat | DSR_DWE); + +#ifdef PC300_DEBUG_INTR + printk ("sca_intr: RX intr chan[%d] (st=0x%08lx, dsr=0x%02x)\n", + ch, status, drx_stat); +#endif + if (status & IR0_DRX(IR0_DMIA, ch)) { + if (drx_stat & DSR_BOF) { +#ifdef CONFIG_PC300_MLPPP + if (chan->conf.proto == PC300_PROTO_MLPPP) { + /* verify if driver is TTY */ + if ((cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) { + rx_dma_stop(card, ch); + } + cpc_tty_receive(d); + rx_dma_start(card, ch); + } else +#endif + { + if ((cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) { + rx_dma_stop(card, ch); + } + cpc_net_rx(dev); + /* Discard invalid frames */ + dev->stats.rx_errors++; + dev->stats.rx_over_errors++; + chan->rx_first_bd = 0; + chan->rx_last_bd = N_DMA_RX_BUF - 1; + rx_dma_start(card, ch); + } + } + } + if (status & IR0_DRX(IR0_DMIB, ch)) { + if (drx_stat & DSR_EOM) { + if (card->hw.type == PC300_TE) { + cpc_writeb(card->hw.falcbase + + card->hw.cpld_reg2, + cpc_readb (card->hw.falcbase + + card->hw.cpld_reg2) | + (CPLD_REG2_FALC_LED1 << (2 * ch))); + } +#ifdef CONFIG_PC300_MLPPP + if (chan->conf.proto == PC300_PROTO_MLPPP) { + /* verify if driver is TTY */ + cpc_tty_receive(d); + } else { + cpc_net_rx(dev); + } +#else + cpc_net_rx(dev); +#endif + if (card->hw.type == PC300_TE) { + cpc_writeb(card->hw.falcbase + + card->hw.cpld_reg2, + cpc_readb (card->hw.falcbase + + card->hw.cpld_reg2) & + ~ (CPLD_REG2_FALC_LED1 << (2 * ch))); + } + } + } + if (!(dsr_rx = cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) { +#ifdef PC300_DEBUG_INTR + printk("%s: RX intr chan[%d] (st=0x%08lx, dsr=0x%02x, dsr2=0x%02x)\n", + dev->name, ch, status, drx_stat, dsr_rx); +#endif + cpc_writeb(scabase + DSR_RX(ch), (dsr_rx | DSR_DE) & 0xfe); + } + } + + /**** Transmission ****/ + if (status & IR0_DTX((IR0_EFT | IR0_DMIA | IR0_DMIB), ch)) { + u8 dtx_stat = cpc_readb(scabase + DSR_TX(ch)); + + /* Clear TX interrupts */ + cpc_writeb(scabase + DSR_TX(ch), dtx_stat | DSR_DWE); + +#ifdef PC300_DEBUG_INTR + printk ("sca_intr: TX intr chan[%d] (st=0x%08lx, dsr=0x%02x)\n", + ch, status, dtx_stat); +#endif + if (status & IR0_DTX(IR0_EFT, ch)) { + if (dtx_stat & DSR_UDRF) { + if (cpc_readb (scabase + M_REG(TBN, ch)) != 0) { + cpc_writeb(scabase + M_REG(CMD,ch), CMD_TX_BUF_CLR); + } + if (card->hw.type == PC300_TE) { + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, + cpc_readb (card->hw.falcbase + + card->hw.cpld_reg2) & + ~ (CPLD_REG2_FALC_LED1 << (2 * ch))); + } + dev->stats.tx_errors++; + dev->stats.tx_fifo_errors++; + sca_tx_intr(d); + } + } + if (status & IR0_DTX(IR0_DMIA, ch)) { + if (dtx_stat & DSR_BOF) { + } + } + if (status & IR0_DTX(IR0_DMIB, ch)) { + if (dtx_stat & DSR_EOM) { + if (card->hw.type == PC300_TE) { + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, + cpc_readb (card->hw.falcbase + + card->hw.cpld_reg2) & + ~ (CPLD_REG2_FALC_LED1 << (2 * ch))); + } + sca_tx_intr(d); + } + } + } + + /**** MSCI ****/ + if (status & IR0_M(IR0_RXINTA, ch)) { + u8 st1 = cpc_readb(scabase + M_REG(ST1, ch)); + + /* Clear MSCI interrupts */ + cpc_writeb(scabase + M_REG(ST1, ch), st1); + +#ifdef PC300_DEBUG_INTR + printk("sca_intr: MSCI intr chan[%d] (st=0x%08lx, st1=0x%02x)\n", + ch, status, st1); +#endif + if (st1 & ST1_CDCD) { /* DCD changed */ + if (cpc_readb(scabase + M_REG(ST3, ch)) & ST3_DCD) { + printk ("%s: DCD is OFF. Going administrative down.\n", + dev->name); +#ifdef CONFIG_PC300_MLPPP + if (chan->conf.proto != PC300_PROTO_MLPPP) { + netif_carrier_off(dev); + } +#else + netif_carrier_off(dev); + +#endif + card->chan[ch].d.line_off++; + } else { /* DCD = 1 */ + printk ("%s: DCD is ON. Going administrative up.\n", + dev->name); +#ifdef CONFIG_PC300_MLPPP + if (chan->conf.proto != PC300_PROTO_MLPPP) + /* verify if driver is not TTY */ +#endif + netif_carrier_on(dev); + card->chan[ch].d.line_on++; + } + } + } + spin_unlock(&card->card_lock); + } + if (++intr_count == 10) + /* Too much work at this board. Force exit */ + break; + } +} + +static void falc_t1_loop_detection(pc300_t *card, int ch, u8 frs1) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + + if (((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_XPRBS) == 0) && + !pfalc->loop_gen) { + if (frs1 & FRS1_LLBDD) { + // A Line Loop Back Deactivation signal detected + if (pfalc->loop_active) { + falc_remote_loop(card, ch, 0); + } + } else { + if ((frs1 & FRS1_LLBAD) && + ((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) == 0)) { + // A Line Loop Back Activation signal detected + if (!pfalc->loop_active) { + falc_remote_loop(card, ch, 1); + } + } + } + } +} + +static void falc_e1_loop_detection(pc300_t *card, int ch, u8 rsp) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + + if (((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_XPRBS) == 0) && + !pfalc->loop_gen) { + if (rsp & RSP_LLBDD) { + // A Line Loop Back Deactivation signal detected + if (pfalc->loop_active) { + falc_remote_loop(card, ch, 0); + } + } else { + if ((rsp & RSP_LLBAD) && + ((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) == 0)) { + // A Line Loop Back Activation signal detected + if (!pfalc->loop_active) { + falc_remote_loop(card, ch, 1); + } + } + } + } +} + +static void falc_t1_intr(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + u8 isr0, isr3, gis; + u8 dummy; + + while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) { + if (gis & GIS_ISR0) { + isr0 = cpc_readb(falcbase + F_REG(FISR0, ch)); + if (isr0 & FISR0_PDEN) { + /* Read the bit to clear the situation */ + if (cpc_readb(falcbase + F_REG(FRS1, ch)) & + FRS1_PDEN) { + pfalc->pden++; + } + } + } + + if (gis & GIS_ISR1) { + dummy = cpc_readb(falcbase + F_REG(FISR1, ch)); + } + + if (gis & GIS_ISR2) { + dummy = cpc_readb(falcbase + F_REG(FISR2, ch)); + } + + if (gis & GIS_ISR3) { + isr3 = cpc_readb(falcbase + F_REG(FISR3, ch)); + if (isr3 & FISR3_SEC) { + pfalc->sec++; + falc_update_stats(card, ch); + falc_check_status(card, ch, + cpc_readb(falcbase + F_REG(FRS0, ch))); + } + if (isr3 & FISR3_ES) { + pfalc->es++; + } + if (isr3 & FISR3_LLBSC) { + falc_t1_loop_detection(card, ch, + cpc_readb(falcbase + F_REG(FRS1, ch))); + } + } + } +} + +static void falc_e1_intr(pc300_t * card, int ch) +{ + pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; + falc_t *pfalc = (falc_t *) & chan->falc; + void __iomem *falcbase = card->hw.falcbase; + u8 isr1, isr2, isr3, gis, rsp; + u8 dummy; + + while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) { + rsp = cpc_readb(falcbase + F_REG(RSP, ch)); + + if (gis & GIS_ISR0) { + dummy = cpc_readb(falcbase + F_REG(FISR0, ch)); + } + if (gis & GIS_ISR1) { + isr1 = cpc_readb(falcbase + F_REG(FISR1, ch)); + if (isr1 & FISR1_XMB) { + if ((pfalc->xmb_cause & 2) && + pfalc->multiframe_mode) { + if (cpc_readb (falcbase + F_REG(FRS0, ch)) & + (FRS0_LOS | FRS0_AIS | FRS0_LFA)) { + cpc_writeb(falcbase + F_REG(XSP, ch), + cpc_readb(falcbase + F_REG(XSP, ch)) + & ~XSP_AXS); + } else { + cpc_writeb(falcbase + F_REG(XSP, ch), + cpc_readb(falcbase + F_REG(XSP, ch)) + | XSP_AXS); + } + } + pfalc->xmb_cause = 0; + cpc_writeb(falcbase + F_REG(IMR1, ch), + cpc_readb(falcbase + F_REG(IMR1, ch)) | IMR1_XMB); + } + if (isr1 & FISR1_LLBSC) { + falc_e1_loop_detection(card, ch, rsp); + } + } + if (gis & GIS_ISR2) { + isr2 = cpc_readb(falcbase + F_REG(FISR2, ch)); + if (isr2 & FISR2_T400MS) { + cpc_writeb(falcbase + F_REG(XSW, ch), + cpc_readb(falcbase + F_REG(XSW, ch)) | XSW_XRA); + } + if (isr2 & FISR2_MFAR) { + cpc_writeb(falcbase + F_REG(XSW, ch), + cpc_readb(falcbase + F_REG(XSW, ch)) & ~XSW_XRA); + } + if (isr2 & (FISR2_FAR | FISR2_LFA | FISR2_AIS | FISR2_LOS)) { + pfalc->xmb_cause |= 2; + cpc_writeb(falcbase + F_REG(IMR1, ch), + cpc_readb(falcbase + F_REG(IMR1, ch)) & ~IMR1_XMB); + } + } + if (gis & GIS_ISR3) { + isr3 = cpc_readb(falcbase + F_REG(FISR3, ch)); + if (isr3 & FISR3_SEC) { + pfalc->sec++; + falc_update_stats(card, ch); + falc_check_status(card, ch, + cpc_readb(falcbase + F_REG(FRS0, ch))); + } + if (isr3 & FISR3_ES) { + pfalc->es++; + } + } + } +} + +static void falc_intr(pc300_t * card) +{ + int ch; + + for (ch = 0; ch < card->hw.nchan; ch++) { + pc300ch_t *chan = &card->chan[ch]; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + + if (conf->media == IF_IFACE_T1) { + falc_t1_intr(card, ch); + } else { + falc_e1_intr(card, ch); + } + } +} + +static irqreturn_t cpc_intr(int irq, void *dev_id) +{ + pc300_t *card = dev_id; + volatile u8 plx_status; + + if (!card) { +#ifdef PC300_DEBUG_INTR + printk("cpc_intr: spurious intr %d\n", irq); +#endif + return IRQ_NONE; /* spurious intr */ + } + + if (!card->hw.rambase) { +#ifdef PC300_DEBUG_INTR + printk("cpc_intr: spurious intr2 %d\n", irq); +#endif + return IRQ_NONE; /* spurious intr */ + } + + switch (card->hw.type) { + case PC300_RSV: + case PC300_X21: + sca_intr(card); + break; + + case PC300_TE: + while ( (plx_status = (cpc_readb(card->hw.plxbase + card->hw.intctl_reg) & + (PLX_9050_LINT1_STATUS | PLX_9050_LINT2_STATUS))) != 0) { + if (plx_status & PLX_9050_LINT1_STATUS) { /* SCA Interrupt */ + sca_intr(card); + } + if (plx_status & PLX_9050_LINT2_STATUS) { /* FALC Interrupt */ + falc_intr(card); + } + } + break; + } + return IRQ_HANDLED; +} + +static void cpc_sca_status(pc300_t * card, int ch) +{ + u8 ilar; + void __iomem *scabase = card->hw.scabase; + unsigned long flags; + + tx_dma_buf_check(card, ch); + rx_dma_buf_check(card, ch); + ilar = cpc_readb(scabase + ILAR); + printk ("ILAR=0x%02x, WCRL=0x%02x, PCR=0x%02x, BTCR=0x%02x, BOLR=0x%02x\n", + ilar, cpc_readb(scabase + WCRL), cpc_readb(scabase + PCR), + cpc_readb(scabase + BTCR), cpc_readb(scabase + BOLR)); + printk("TX_CDA=0x%08x, TX_EDA=0x%08x\n", + cpc_readl(scabase + DTX_REG(CDAL, ch)), + cpc_readl(scabase + DTX_REG(EDAL, ch))); + printk("RX_CDA=0x%08x, RX_EDA=0x%08x, BFL=0x%04x\n", + cpc_readl(scabase + DRX_REG(CDAL, ch)), + cpc_readl(scabase + DRX_REG(EDAL, ch)), + cpc_readw(scabase + DRX_REG(BFLL, ch))); + printk("DMER=0x%02x, DSR_TX=0x%02x, DSR_RX=0x%02x\n", + cpc_readb(scabase + DMER), cpc_readb(scabase + DSR_TX(ch)), + cpc_readb(scabase + DSR_RX(ch))); + printk("DMR_TX=0x%02x, DMR_RX=0x%02x, DIR_TX=0x%02x, DIR_RX=0x%02x\n", + cpc_readb(scabase + DMR_TX(ch)), cpc_readb(scabase + DMR_RX(ch)), + cpc_readb(scabase + DIR_TX(ch)), + cpc_readb(scabase + DIR_RX(ch))); + printk("DCR_TX=0x%02x, DCR_RX=0x%02x, FCT_TX=0x%02x, FCT_RX=0x%02x\n", + cpc_readb(scabase + DCR_TX(ch)), cpc_readb(scabase + DCR_RX(ch)), + cpc_readb(scabase + FCT_TX(ch)), + cpc_readb(scabase + FCT_RX(ch))); + printk("MD0=0x%02x, MD1=0x%02x, MD2=0x%02x, MD3=0x%02x, IDL=0x%02x\n", + cpc_readb(scabase + M_REG(MD0, ch)), + cpc_readb(scabase + M_REG(MD1, ch)), + cpc_readb(scabase + M_REG(MD2, ch)), + cpc_readb(scabase + M_REG(MD3, ch)), + cpc_readb(scabase + M_REG(IDL, ch))); + printk("CMD=0x%02x, SA0=0x%02x, SA1=0x%02x, TFN=0x%02x, CTL=0x%02x\n", + cpc_readb(scabase + M_REG(CMD, ch)), + cpc_readb(scabase + M_REG(SA0, ch)), + cpc_readb(scabase + M_REG(SA1, ch)), + cpc_readb(scabase + M_REG(TFN, ch)), + cpc_readb(scabase + M_REG(CTL, ch))); + printk("ST0=0x%02x, ST1=0x%02x, ST2=0x%02x, ST3=0x%02x, ST4=0x%02x\n", + cpc_readb(scabase + M_REG(ST0, ch)), + cpc_readb(scabase + M_REG(ST1, ch)), + cpc_readb(scabase + M_REG(ST2, ch)), + cpc_readb(scabase + M_REG(ST3, ch)), + cpc_readb(scabase + M_REG(ST4, ch))); + printk ("CST0=0x%02x, CST1=0x%02x, CST2=0x%02x, CST3=0x%02x, FST=0x%02x\n", + cpc_readb(scabase + M_REG(CST0, ch)), + cpc_readb(scabase + M_REG(CST1, ch)), + cpc_readb(scabase + M_REG(CST2, ch)), + cpc_readb(scabase + M_REG(CST3, ch)), + cpc_readb(scabase + M_REG(FST, ch))); + printk("TRC0=0x%02x, TRC1=0x%02x, RRC=0x%02x, TBN=0x%02x, RBN=0x%02x\n", + cpc_readb(scabase + M_REG(TRC0, ch)), + cpc_readb(scabase + M_REG(TRC1, ch)), + cpc_readb(scabase + M_REG(RRC, ch)), + cpc_readb(scabase + M_REG(TBN, ch)), + cpc_readb(scabase + M_REG(RBN, ch))); + printk("TFS=0x%02x, TNR0=0x%02x, TNR1=0x%02x, RNR=0x%02x\n", + cpc_readb(scabase + M_REG(TFS, ch)), + cpc_readb(scabase + M_REG(TNR0, ch)), + cpc_readb(scabase + M_REG(TNR1, ch)), + cpc_readb(scabase + M_REG(RNR, ch))); + printk("TCR=0x%02x, RCR=0x%02x, TNR1=0x%02x, RNR=0x%02x\n", + cpc_readb(scabase + M_REG(TCR, ch)), + cpc_readb(scabase + M_REG(RCR, ch)), + cpc_readb(scabase + M_REG(TNR1, ch)), + cpc_readb(scabase + M_REG(RNR, ch))); + printk("TXS=0x%02x, RXS=0x%02x, EXS=0x%02x, TMCT=0x%02x, TMCR=0x%02x\n", + cpc_readb(scabase + M_REG(TXS, ch)), + cpc_readb(scabase + M_REG(RXS, ch)), + cpc_readb(scabase + M_REG(EXS, ch)), + cpc_readb(scabase + M_REG(TMCT, ch)), + cpc_readb(scabase + M_REG(TMCR, ch))); + printk("IE0=0x%02x, IE1=0x%02x, IE2=0x%02x, IE4=0x%02x, FIE=0x%02x\n", + cpc_readb(scabase + M_REG(IE0, ch)), + cpc_readb(scabase + M_REG(IE1, ch)), + cpc_readb(scabase + M_REG(IE2, ch)), + cpc_readb(scabase + M_REG(IE4, ch)), + cpc_readb(scabase + M_REG(FIE, ch))); + printk("IER0=0x%08x\n", cpc_readl(scabase + IER0)); + + if (ilar != 0) { + CPC_LOCK(card, flags); + cpc_writeb(scabase + ILAR, ilar); + cpc_writeb(scabase + DMER, 0x80); + CPC_UNLOCK(card, flags); + } +} + +static void cpc_falc_status(pc300_t * card, int ch) +{ + pc300ch_t *chan = &card->chan[ch]; + falc_t *pfalc = (falc_t *) & chan->falc; + unsigned long flags; + + CPC_LOCK(card, flags); + printk("CH%d: %s %s %d channels\n", + ch, (pfalc->sync ? "SYNC" : ""), (pfalc->active ? "ACTIVE" : ""), + pfalc->num_channels); + + printk(" pden=%d, los=%d, losr=%d, lfa=%d, farec=%d\n", + pfalc->pden, pfalc->los, pfalc->losr, pfalc->lfa, pfalc->farec); + printk(" lmfa=%d, ais=%d, sec=%d, es=%d, rai=%d\n", + pfalc->lmfa, pfalc->ais, pfalc->sec, pfalc->es, pfalc->rai); + printk(" bec=%d, fec=%d, cvc=%d, cec=%d, ebc=%d\n", + pfalc->bec, pfalc->fec, pfalc->cvc, pfalc->cec, pfalc->ebc); + + printk("\n"); + printk(" STATUS: %s %s %s %s %s %s\n", + (pfalc->red_alarm ? "RED" : ""), + (pfalc->blue_alarm ? "BLU" : ""), + (pfalc->yellow_alarm ? "YEL" : ""), + (pfalc->loss_fa ? "LFA" : ""), + (pfalc->loss_mfa ? "LMF" : ""), (pfalc->prbs ? "PRB" : "")); + CPC_UNLOCK(card, flags); +} + +static int cpc_change_mtu(struct net_device *dev, int new_mtu) +{ + if ((new_mtu < 128) || (new_mtu > PC300_DEF_MTU)) + return -EINVAL; + dev->mtu = new_mtu; + return 0; +} + +static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv; + pc300ch_t *chan = (pc300ch_t *) d->chan; + pc300_t *card = (pc300_t *) chan->card; + pc300conf_t conf_aux; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + int ch = chan->channel; + void __user *arg = ifr->ifr_data; + struct if_settings *settings = &ifr->ifr_settings; + void __iomem *scabase = card->hw.scabase; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + switch (cmd) { + case SIOCGPC300CONF: +#ifdef CONFIG_PC300_MLPPP + if (conf->proto != PC300_PROTO_MLPPP) { + conf->proto = /* FIXME hdlc->proto.id */ 0; + } +#else + conf->proto = /* FIXME hdlc->proto.id */ 0; +#endif + memcpy(&conf_aux.conf, conf, sizeof(pc300chconf_t)); + memcpy(&conf_aux.hw, &card->hw, sizeof(pc300hw_t)); + if (!arg || + copy_to_user(arg, &conf_aux, sizeof(pc300conf_t))) + return -EINVAL; + return 0; + case SIOCSPC300CONF: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (!arg || + copy_from_user(&conf_aux.conf, arg, sizeof(pc300chconf_t))) + return -EINVAL; + if (card->hw.cpld_id < 0x02 && + conf_aux.conf.fr_mode == PC300_FR_UNFRAMED) { + /* CPLD_ID < 0x02 doesn't support Unframed E1 */ + return -EINVAL; + } +#ifdef CONFIG_PC300_MLPPP + if (conf_aux.conf.proto == PC300_PROTO_MLPPP) { + if (conf->proto != PC300_PROTO_MLPPP) { + memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t)); + cpc_tty_init(d); /* init TTY driver */ + } + } else { + if (conf_aux.conf.proto == 0xffff) { + if (conf->proto == PC300_PROTO_MLPPP){ + /* ifdown interface */ + cpc_close(dev); + } + } else { + memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t)); + /* FIXME hdlc->proto.id = conf->proto; */ + } + } +#else + memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t)); + /* FIXME hdlc->proto.id = conf->proto; */ +#endif + return 0; + case SIOCGPC300STATUS: + cpc_sca_status(card, ch); + return 0; + case SIOCGPC300FALCSTATUS: + cpc_falc_status(card, ch); + return 0; + + case SIOCGPC300UTILSTATS: + { + if (!arg) { /* clear statistics */ + memset(&dev->stats, 0, sizeof(dev->stats)); + if (card->hw.type == PC300_TE) { + memset(&chan->falc, 0, sizeof(falc_t)); + } + } else { + pc300stats_t pc300stats; + + memset(&pc300stats, 0, sizeof(pc300stats_t)); + pc300stats.hw_type = card->hw.type; + pc300stats.line_on = card->chan[ch].d.line_on; + pc300stats.line_off = card->chan[ch].d.line_off; + memcpy(&pc300stats.gen_stats, &dev->stats, + sizeof(dev->stats)); + if (card->hw.type == PC300_TE) + memcpy(&pc300stats.te_stats,&chan->falc,sizeof(falc_t)); + if (copy_to_user(arg, &pc300stats, sizeof(pc300stats_t))) + return -EFAULT; + } + return 0; + } + + case SIOCGPC300UTILSTATUS: + { + struct pc300status pc300status; + + pc300status.hw_type = card->hw.type; + if (card->hw.type == PC300_TE) { + pc300status.te_status.sync = chan->falc.sync; + pc300status.te_status.red_alarm = chan->falc.red_alarm; + pc300status.te_status.blue_alarm = chan->falc.blue_alarm; + pc300status.te_status.loss_fa = chan->falc.loss_fa; + pc300status.te_status.yellow_alarm =chan->falc.yellow_alarm; + pc300status.te_status.loss_mfa = chan->falc.loss_mfa; + pc300status.te_status.prbs = chan->falc.prbs; + } else { + pc300status.gen_status.dcd = + !(cpc_readb (scabase + M_REG(ST3, ch)) & ST3_DCD); + pc300status.gen_status.cts = + !(cpc_readb (scabase + M_REG(ST3, ch)) & ST3_CTS); + pc300status.gen_status.rts = + !(cpc_readb (scabase + M_REG(CTL, ch)) & CTL_RTS); + pc300status.gen_status.dtr = + !(cpc_readb (scabase + M_REG(CTL, ch)) & CTL_DTR); + /* There is no DSR in HD64572 */ + } + if (!arg || + copy_to_user(arg, &pc300status, sizeof(pc300status_t))) + return -EINVAL; + return 0; + } + + case SIOCSPC300TRACE: + /* Sets/resets a trace_flag for the respective device */ + if (!arg || copy_from_user(&d->trace_on, arg,sizeof(unsigned char))) + return -EINVAL; + return 0; + + case SIOCSPC300LOOPBACK: + { + struct pc300loopback pc300loop; + + /* TE boards only */ + if (card->hw.type != PC300_TE) + return -EINVAL; + + if (!arg || + copy_from_user(&pc300loop, arg, sizeof(pc300loopback_t))) + return -EINVAL; + switch (pc300loop.loop_type) { + case PC300LOCLOOP: /* Turn the local loop on/off */ + falc_local_loop(card, ch, pc300loop.loop_on); + return 0; + + case PC300REMLOOP: /* Turn the remote loop on/off */ + falc_remote_loop(card, ch, pc300loop.loop_on); + return 0; + + case PC300PAYLOADLOOP: /* Turn the payload loop on/off */ + falc_payload_loop(card, ch, pc300loop.loop_on); + return 0; + + case PC300GENLOOPUP: /* Generate loop UP */ + if (pc300loop.loop_on) { + falc_generate_loop_up_code (card, ch); + } else { + turn_off_xlu(card, ch); + } + return 0; + + case PC300GENLOOPDOWN: /* Generate loop DOWN */ + if (pc300loop.loop_on) { + falc_generate_loop_down_code (card, ch); + } else { + turn_off_xld(card, ch); + } + return 0; + + default: + return -EINVAL; + } + } + + case SIOCSPC300PATTERNTEST: + /* Turn the pattern test on/off and show the errors counter */ + { + struct pc300patterntst pc300patrntst; + + /* TE boards only */ + if (card->hw.type != PC300_TE) + return -EINVAL; + + if (card->hw.cpld_id < 0x02) { + /* CPLD_ID < 0x02 doesn't support pattern test */ + return -EINVAL; + } + + if (!arg || + copy_from_user(&pc300patrntst,arg,sizeof(pc300patterntst_t))) + return -EINVAL; + if (pc300patrntst.patrntst_on == 2) { + if (chan->falc.prbs == 0) { + falc_pattern_test(card, ch, 1); + } + pc300patrntst.num_errors = + falc_pattern_test_error(card, ch); + if (copy_to_user(arg, &pc300patrntst, + sizeof(pc300patterntst_t))) + return -EINVAL; + } else { + falc_pattern_test(card, ch, pc300patrntst.patrntst_on); + } + return 0; + } + + case SIOCWANDEV: + switch (ifr->ifr_settings.type) { + case IF_GET_IFACE: + { + const size_t size = sizeof(sync_serial_settings); + ifr->ifr_settings.type = conf->media; + if (ifr->ifr_settings.size < size) { + /* data size wanted */ + ifr->ifr_settings.size = size; + return -ENOBUFS; + } + + if (copy_to_user(settings->ifs_ifsu.sync, + &conf->phys_settings, size)) { + return -EFAULT; + } + return 0; + } + + case IF_IFACE_V35: + case IF_IFACE_V24: + case IF_IFACE_X21: + { + const size_t size = sizeof(sync_serial_settings); + + if (!capable(CAP_NET_ADMIN)) { + return -EPERM; + } + /* incorrect data len? */ + if (ifr->ifr_settings.size != size) { + return -ENOBUFS; + } + + if (copy_from_user(&conf->phys_settings, + settings->ifs_ifsu.sync, size)) { + return -EFAULT; + } + + if (conf->phys_settings.loopback) { + cpc_writeb(card->hw.scabase + M_REG(MD2, ch), + cpc_readb(card->hw.scabase + M_REG(MD2, ch)) | + MD2_LOOP_MIR); + } + conf->media = ifr->ifr_settings.type; + return 0; + } + + case IF_IFACE_T1: + case IF_IFACE_E1: + { + const size_t te_size = sizeof(te1_settings); + const size_t size = sizeof(sync_serial_settings); + + if (!capable(CAP_NET_ADMIN)) { + return -EPERM; + } + + /* incorrect data len? */ + if (ifr->ifr_settings.size != te_size) { + return -ENOBUFS; + } + + if (copy_from_user(&conf->phys_settings, + settings->ifs_ifsu.te1, size)) { + return -EFAULT; + }/* Ignoring HDLC slot_map for a while */ + + if (conf->phys_settings.loopback) { + cpc_writeb(card->hw.scabase + M_REG(MD2, ch), + cpc_readb(card->hw.scabase + M_REG(MD2, ch)) | + MD2_LOOP_MIR); + } + conf->media = ifr->ifr_settings.type; + return 0; + } + default: + return hdlc_ioctl(dev, ifr, cmd); + } + + default: + return hdlc_ioctl(dev, ifr, cmd); + } +} + +static int clock_rate_calc(u32 rate, u32 clock, int *br_io) +{ + int br, tc; + int br_pwr, error; + + *br_io = 0; + + if (rate == 0) + return 0; + + for (br = 0, br_pwr = 1; br <= 9; br++, br_pwr <<= 1) { + if ((tc = clock / br_pwr / rate) <= 0xff) { + *br_io = br; + break; + } + } + + if (tc <= 0xff) { + error = ((rate - (clock / br_pwr / rate)) / rate) * 1000; + /* Errors bigger than +/- 1% won't be tolerated */ + if (error < -10 || error > 10) + return -1; + else + return tc; + } else { + return -1; + } +} + +static int ch_config(pc300dev_t * d) +{ + pc300ch_t *chan = (pc300ch_t *) d->chan; + pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; + pc300_t *card = (pc300_t *) chan->card; + void __iomem *scabase = card->hw.scabase; + void __iomem *plxbase = card->hw.plxbase; + int ch = chan->channel; + u32 clkrate = chan->conf.phys_settings.clock_rate; + u32 clktype = chan->conf.phys_settings.clock_type; + u16 encoding = chan->conf.proto_settings.encoding; + u16 parity = chan->conf.proto_settings.parity; + u8 md0, md2; + + /* Reset the channel */ + cpc_writeb(scabase + M_REG(CMD, ch), CMD_CH_RST); + + /* Configure the SCA registers */ + switch (parity) { + case PARITY_NONE: + md0 = MD0_BIT_SYNC; + break; + case PARITY_CRC16_PR0: + md0 = MD0_CRC16_0|MD0_CRCC0|MD0_BIT_SYNC; + break; + case PARITY_CRC16_PR1: + md0 = MD0_CRC16_1|MD0_CRCC0|MD0_BIT_SYNC; + break; + case PARITY_CRC32_PR1_CCITT: + md0 = MD0_CRC32|MD0_CRCC0|MD0_BIT_SYNC; + break; + case PARITY_CRC16_PR1_CCITT: + default: + md0 = MD0_CRC_CCITT|MD0_CRCC0|MD0_BIT_SYNC; + break; + } + switch (encoding) { + case ENCODING_NRZI: + md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_NRZI; + break; + case ENCODING_FM_MARK: /* FM1 */ + md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_FM1; + break; + case ENCODING_FM_SPACE: /* FM0 */ + md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_FM0; + break; + case ENCODING_MANCHESTER: /* It's not working... */ + md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_MANCH; + break; + case ENCODING_NRZ: + default: + md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_NRZ; + break; + } + cpc_writeb(scabase + M_REG(MD0, ch), md0); + cpc_writeb(scabase + M_REG(MD1, ch), 0); + cpc_writeb(scabase + M_REG(MD2, ch), md2); + cpc_writeb(scabase + M_REG(IDL, ch), 0x7e); + cpc_writeb(scabase + M_REG(CTL, ch), CTL_URSKP | CTL_IDLC); + + /* Configure HW media */ + switch (card->hw.type) { + case PC300_RSV: + if (conf->media == IF_IFACE_V35) { + cpc_writel((plxbase + card->hw.gpioc_reg), + cpc_readl(plxbase + card->hw.gpioc_reg) | PC300_CHMEDIA_MASK(ch)); + } else { + cpc_writel((plxbase + card->hw.gpioc_reg), + cpc_readl(plxbase + card->hw.gpioc_reg) & ~PC300_CHMEDIA_MASK(ch)); + } + break; + + case PC300_X21: + break; + + case PC300_TE: + te_config(card, ch); + break; + } + + switch (card->hw.type) { + case PC300_RSV: + case PC300_X21: + if (clktype == CLOCK_INT || clktype == CLOCK_TXINT) { + int tmc, br; + + /* Calculate the clkrate parameters */ + tmc = clock_rate_calc(clkrate, card->hw.clock, &br); + if (tmc < 0) + return -EIO; + cpc_writeb(scabase + M_REG(TMCT, ch), tmc); + cpc_writeb(scabase + M_REG(TXS, ch), + (TXS_DTRXC | TXS_IBRG | br)); + if (clktype == CLOCK_INT) { + cpc_writeb(scabase + M_REG(TMCR, ch), tmc); + cpc_writeb(scabase + M_REG(RXS, ch), + (RXS_IBRG | br)); + } else { + cpc_writeb(scabase + M_REG(TMCR, ch), 1); + cpc_writeb(scabase + M_REG(RXS, ch), 0); + } + if (card->hw.type == PC300_X21) { + cpc_writeb(scabase + M_REG(GPO, ch), 1); + cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1 | EXS_RES1); + } else { + cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1); + } + } else { + cpc_writeb(scabase + M_REG(TMCT, ch), 1); + if (clktype == CLOCK_EXT) { + cpc_writeb(scabase + M_REG(TXS, ch), + TXS_DTRXC); + } else { + cpc_writeb(scabase + M_REG(TXS, ch), + TXS_DTRXC|TXS_RCLK); + } + cpc_writeb(scabase + M_REG(TMCR, ch), 1); + cpc_writeb(scabase + M_REG(RXS, ch), 0); + if (card->hw.type == PC300_X21) { + cpc_writeb(scabase + M_REG(GPO, ch), 0); + cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1 | EXS_RES1); + } else { + cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1); + } + } + break; + + case PC300_TE: + /* SCA always receives clock from the FALC chip */ + cpc_writeb(scabase + M_REG(TMCT, ch), 1); + cpc_writeb(scabase + M_REG(TXS, ch), 0); + cpc_writeb(scabase + M_REG(TMCR, ch), 1); + cpc_writeb(scabase + M_REG(RXS, ch), 0); + cpc_writeb(scabase + M_REG(EXS, ch), 0); + break; + } + + /* Enable Interrupts */ + cpc_writel(scabase + IER0, + cpc_readl(scabase + IER0) | + IR0_M(IR0_RXINTA, ch) | + IR0_DRX(IR0_EFT | IR0_DMIA | IR0_DMIB, ch) | + IR0_DTX(IR0_EFT | IR0_DMIA | IR0_DMIB, ch)); + cpc_writeb(scabase + M_REG(IE0, ch), + cpc_readl(scabase + M_REG(IE0, ch)) | IE0_RXINTA); + cpc_writeb(scabase + M_REG(IE1, ch), + cpc_readl(scabase + M_REG(IE1, ch)) | IE1_CDCD); + + return 0; +} + +static int rx_config(pc300dev_t * d) +{ + pc300ch_t *chan = (pc300ch_t *) d->chan; + pc300_t *card = (pc300_t *) chan->card; + void __iomem *scabase = card->hw.scabase; + int ch = chan->channel; + + cpc_writeb(scabase + DSR_RX(ch), 0); + + /* General RX settings */ + cpc_writeb(scabase + M_REG(RRC, ch), 0); + cpc_writeb(scabase + M_REG(RNR, ch), 16); + + /* Enable reception */ + cpc_writeb(scabase + M_REG(CMD, ch), CMD_RX_CRC_INIT); + cpc_writeb(scabase + M_REG(CMD, ch), CMD_RX_ENA); + + /* Initialize DMA stuff */ + chan->rx_first_bd = 0; + chan->rx_last_bd = N_DMA_RX_BUF - 1; + rx_dma_buf_init(card, ch); + cpc_writeb(scabase + DCR_RX(ch), DCR_FCT_CLR); + cpc_writeb(scabase + DMR_RX(ch), (DMR_TMOD | DMR_NF)); + cpc_writeb(scabase + DIR_RX(ch), (DIR_EOM | DIR_BOF)); + + /* Start DMA */ + rx_dma_start(card, ch); + + return 0; +} + +static int tx_config(pc300dev_t * d) +{ + pc300ch_t *chan = (pc300ch_t *) d->chan; + pc300_t *card = (pc300_t *) chan->card; + void __iomem *scabase = card->hw.scabase; + int ch = chan->channel; + + cpc_writeb(scabase + DSR_TX(ch), 0); + + /* General TX settings */ + cpc_writeb(scabase + M_REG(TRC0, ch), 0); + cpc_writeb(scabase + M_REG(TFS, ch), 32); + cpc_writeb(scabase + M_REG(TNR0, ch), 20); + cpc_writeb(scabase + M_REG(TNR1, ch), 48); + cpc_writeb(scabase + M_REG(TCR, ch), 8); + + /* Enable transmission */ + cpc_writeb(scabase + M_REG(CMD, ch), CMD_TX_CRC_INIT); + + /* Initialize DMA stuff */ + chan->tx_first_bd = 0; + chan->tx_next_bd = 0; + tx_dma_buf_init(card, ch); + cpc_writeb(scabase + DCR_TX(ch), DCR_FCT_CLR); + cpc_writeb(scabase + DMR_TX(ch), (DMR_TMOD | DMR_NF)); + cpc_writeb(scabase + DIR_TX(ch), (DIR_EOM | DIR_BOF | DIR_UDRF)); + cpc_writel(scabase + DTX_REG(CDAL, ch), TX_BD_ADDR(ch, chan->tx_first_bd)); + cpc_writel(scabase + DTX_REG(EDAL, ch), TX_BD_ADDR(ch, chan->tx_next_bd)); + + return 0; +} + +static int cpc_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) +{ + pc300dev_t *d = (pc300dev_t *)dev_to_hdlc(dev)->priv; + pc300ch_t *chan = (pc300ch_t *)d->chan; + pc300_t *card = (pc300_t *)chan->card; + pc300chconf_t *conf = (pc300chconf_t *)&chan->conf; + + if (card->hw.type == PC300_TE) { + if (encoding != ENCODING_NRZ && encoding != ENCODING_NRZI) { + return -EINVAL; + } + } else { + if (encoding != ENCODING_NRZ && encoding != ENCODING_NRZI && + encoding != ENCODING_FM_MARK && encoding != ENCODING_FM_SPACE) { + /* Driver doesn't support ENCODING_MANCHESTER yet */ + return -EINVAL; + } + } + + if (parity != PARITY_NONE && parity != PARITY_CRC16_PR0 && + parity != PARITY_CRC16_PR1 && parity != PARITY_CRC32_PR1_CCITT && + parity != PARITY_CRC16_PR1_CCITT) { + return -EINVAL; + } + + conf->proto_settings.encoding = encoding; + conf->proto_settings.parity = parity; + return 0; +} + +static int cpc_opench(pc300dev_t * d) +{ + pc300ch_t *chan = (pc300ch_t *) d->chan; + pc300_t *card = (pc300_t *) chan->card; + int ch = chan->channel, rc; + void __iomem *scabase = card->hw.scabase; + + rc = ch_config(d); + if (rc) + return rc; + + rx_config(d); + + tx_config(d); + + /* Assert RTS and DTR */ + cpc_writeb(scabase + M_REG(CTL, ch), + cpc_readb(scabase + M_REG(CTL, ch)) & ~(CTL_RTS | CTL_DTR)); + + return 0; +} + +static void cpc_closech(pc300dev_t * d) +{ + pc300ch_t *chan = (pc300ch_t *) d->chan; + pc300_t *card = (pc300_t *) chan->card; + falc_t *pfalc = (falc_t *) & chan->falc; + int ch = chan->channel; + + cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_CH_RST); + rx_dma_stop(card, ch); + tx_dma_stop(card, ch); + + if (card->hw.type == PC300_TE) { + memset(pfalc, 0, sizeof(falc_t)); + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) & + ~((CPLD_REG2_FALC_TX_CLK | CPLD_REG2_FALC_RX_CLK | + CPLD_REG2_FALC_LED2) << (2 * ch))); + /* Reset the FALC chip */ + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) | + (CPLD_REG1_FALC_RESET << (2 * ch))); + udelay(10000); + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) & + ~(CPLD_REG1_FALC_RESET << (2 * ch))); + } +} + +int cpc_open(struct net_device *dev) +{ + pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv; + struct ifreq ifr; + int result; + +#ifdef PC300_DEBUG_OTHER + printk("pc300: cpc_open"); +#endif + + result = hdlc_open(dev); + + if (result) + return result; + + sprintf(ifr.ifr_name, "%s", dev->name); + result = cpc_opench(d); + if (result) + goto err_out; + + netif_start_queue(dev); + return 0; + +err_out: + hdlc_close(dev); + return result; +} + +static int cpc_close(struct net_device *dev) +{ + pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv; + pc300ch_t *chan = (pc300ch_t *) d->chan; + pc300_t *card = (pc300_t *) chan->card; + unsigned long flags; + +#ifdef PC300_DEBUG_OTHER + printk("pc300: cpc_close"); +#endif + + netif_stop_queue(dev); + + CPC_LOCK(card, flags); + cpc_closech(d); + CPC_UNLOCK(card, flags); + + hdlc_close(dev); + +#ifdef CONFIG_PC300_MLPPP + if (chan->conf.proto == PC300_PROTO_MLPPP) { + cpc_tty_unregister_service(d); + chan->conf.proto = 0xffff; + } +#endif + + return 0; +} + +static u32 detect_ram(pc300_t * card) +{ + u32 i; + u8 data; + void __iomem *rambase = card->hw.rambase; + + card->hw.ramsize = PC300_RAMSIZE; + /* Let's find out how much RAM is present on this board */ + for (i = 0; i < card->hw.ramsize; i++) { + data = (u8)(i & 0xff); + cpc_writeb(rambase + i, data); + if (cpc_readb(rambase + i) != data) { + break; + } + } + return i; +} + +static void plx_init(pc300_t * card) +{ + struct RUNTIME_9050 __iomem *plx_ctl = card->hw.plxbase; + + /* Reset PLX */ + cpc_writel(&plx_ctl->init_ctrl, + cpc_readl(&plx_ctl->init_ctrl) | 0x40000000); + udelay(10000L); + cpc_writel(&plx_ctl->init_ctrl, + cpc_readl(&plx_ctl->init_ctrl) & ~0x40000000); + + /* Reload Config. Registers from EEPROM */ + cpc_writel(&plx_ctl->init_ctrl, + cpc_readl(&plx_ctl->init_ctrl) | 0x20000000); + udelay(10000L); + cpc_writel(&plx_ctl->init_ctrl, + cpc_readl(&plx_ctl->init_ctrl) & ~0x20000000); + +} + +static void show_version(void) +{ + char *rcsvers, *rcsdate, *tmp; + + rcsvers = strchr(rcsid, ' '); + rcsvers++; + tmp = strchr(rcsvers, ' '); + *tmp++ = '\0'; + rcsdate = strchr(tmp, ' '); + rcsdate++; + tmp = strrchr(rcsdate, ' '); + *tmp = '\0'; + pr_info("Cyclades-PC300 driver %s %s\n", rcsvers, rcsdate); +} /* show_version */ + +static const struct net_device_ops cpc_netdev_ops = { + .ndo_open = cpc_open, + .ndo_stop = cpc_close, + .ndo_tx_timeout = cpc_tx_timeout, + .ndo_set_mac_address = NULL, + .ndo_change_mtu = cpc_change_mtu, + .ndo_do_ioctl = cpc_ioctl, + .ndo_validate_addr = eth_validate_addr, +}; + +static void cpc_init_card(pc300_t * card) +{ + int i, devcount = 0; + static int board_nbr = 1; + + /* Enable interrupts on the PCI bridge */ + plx_init(card); + cpc_writew(card->hw.plxbase + card->hw.intctl_reg, + cpc_readw(card->hw.plxbase + card->hw.intctl_reg) | 0x0040); + +#ifdef USE_PCI_CLOCK + /* Set board clock to PCI clock */ + cpc_writel(card->hw.plxbase + card->hw.gpioc_reg, + cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) | 0x00000004UL); + card->hw.clock = PC300_PCI_CLOCK; +#else + /* Set board clock to internal oscillator clock */ + cpc_writel(card->hw.plxbase + card->hw.gpioc_reg, + cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) & ~0x00000004UL); + card->hw.clock = PC300_OSC_CLOCK; +#endif + + /* Detect actual on-board RAM size */ + card->hw.ramsize = detect_ram(card); + + /* Set Global SCA-II registers */ + cpc_writeb(card->hw.scabase + PCR, PCR_PR2); + cpc_writeb(card->hw.scabase + BTCR, 0x10); + cpc_writeb(card->hw.scabase + WCRL, 0); + cpc_writeb(card->hw.scabase + DMER, 0x80); + + if (card->hw.type == PC300_TE) { + u8 reg1; + + /* Check CPLD version */ + reg1 = cpc_readb(card->hw.falcbase + CPLD_REG1); + cpc_writeb(card->hw.falcbase + CPLD_REG1, (reg1 + 0x5a)); + if (cpc_readb(card->hw.falcbase + CPLD_REG1) == reg1) { + /* New CPLD */ + card->hw.cpld_id = cpc_readb(card->hw.falcbase + CPLD_ID_REG); + card->hw.cpld_reg1 = CPLD_V2_REG1; + card->hw.cpld_reg2 = CPLD_V2_REG2; + } else { + /* old CPLD */ + card->hw.cpld_id = 0; + card->hw.cpld_reg1 = CPLD_REG1; + card->hw.cpld_reg2 = CPLD_REG2; + cpc_writeb(card->hw.falcbase + CPLD_REG1, reg1); + } + + /* Enable the board's global clock */ + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) | + CPLD_REG1_GLOBAL_CLK); + + } + + for (i = 0; i < card->hw.nchan; i++) { + pc300ch_t *chan = &card->chan[i]; + pc300dev_t *d = &chan->d; + hdlc_device *hdlc; + struct net_device *dev; + + chan->card = card; + chan->channel = i; + chan->conf.phys_settings.clock_rate = 0; + chan->conf.phys_settings.clock_type = CLOCK_EXT; + chan->conf.proto_settings.encoding = ENCODING_NRZ; + chan->conf.proto_settings.parity = PARITY_CRC16_PR1_CCITT; + switch (card->hw.type) { + case PC300_TE: + chan->conf.media = IF_IFACE_T1; + chan->conf.lcode = PC300_LC_B8ZS; + chan->conf.fr_mode = PC300_FR_ESF; + chan->conf.lbo = PC300_LBO_0_DB; + chan->conf.rx_sens = PC300_RX_SENS_SH; + chan->conf.tslot_bitmap = 0xffffffffUL; + break; + + case PC300_X21: + chan->conf.media = IF_IFACE_X21; + break; + + case PC300_RSV: + default: + chan->conf.media = IF_IFACE_V35; + break; + } + chan->conf.proto = IF_PROTO_PPP; + chan->tx_first_bd = 0; + chan->tx_next_bd = 0; + chan->rx_first_bd = 0; + chan->rx_last_bd = N_DMA_RX_BUF - 1; + chan->nfree_tx_bd = N_DMA_TX_BUF; + + d->chan = chan; + d->trace_on = 0; + d->line_on = 0; + d->line_off = 0; + + dev = alloc_hdlcdev(d); + if (dev == NULL) + continue; + + hdlc = dev_to_hdlc(dev); + hdlc->xmit = cpc_queue_xmit; + hdlc->attach = cpc_attach; + d->dev = dev; + dev->mem_start = card->hw.ramphys; + dev->mem_end = card->hw.ramphys + card->hw.ramsize - 1; + dev->irq = card->hw.irq; + dev->tx_queue_len = PC300_TX_QUEUE_LEN; + dev->mtu = PC300_DEF_MTU; + + dev->netdev_ops = &cpc_netdev_ops; + dev->watchdog_timeo = PC300_TX_TIMEOUT; + + if (register_hdlc_device(dev) == 0) { + printk("%s: Cyclades-PC300/", dev->name); + switch (card->hw.type) { + case PC300_TE: + if (card->hw.bus == PC300_PMC) { + printk("TE-M"); + } else { + printk("TE "); + } + break; + + case PC300_X21: + printk("X21 "); + break; + + case PC300_RSV: + default: + printk("RSV "); + break; + } + printk (" #%d, %dKB of RAM at 0x%08x, IRQ%d, channel %d.\n", + board_nbr, card->hw.ramsize / 1024, + card->hw.ramphys, card->hw.irq, i + 1); + devcount++; + } else { + printk ("Dev%d on card(0x%08x): unable to allocate i/f name.\n", + i + 1, card->hw.ramphys); + free_netdev(dev); + continue; + } + } + spin_lock_init(&card->card_lock); + + board_nbr++; +} + +static int __devinit +cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int err, eeprom_outdated = 0; + u16 device_id; + pc300_t *card; + + if ((err = pci_enable_device(pdev)) < 0) + return err; + + card = kzalloc(sizeof(pc300_t), GFP_KERNEL); + if (card == NULL) { + printk("PC300 found at RAM 0x%016llx, " + "but could not allocate card structure.\n", + (unsigned long long)pci_resource_start(pdev, 3)); + err = -ENOMEM; + goto err_disable_dev; + } + + err = -ENODEV; + + /* read PCI configuration area */ + device_id = ent->device; + card->hw.irq = pdev->irq; + card->hw.iophys = pci_resource_start(pdev, 1); + card->hw.iosize = pci_resource_len(pdev, 1); + card->hw.scaphys = pci_resource_start(pdev, 2); + card->hw.scasize = pci_resource_len(pdev, 2); + card->hw.ramphys = pci_resource_start(pdev, 3); + card->hw.alloc_ramsize = pci_resource_len(pdev, 3); + card->hw.falcphys = pci_resource_start(pdev, 4); + card->hw.falcsize = pci_resource_len(pdev, 4); + card->hw.plxphys = pci_resource_start(pdev, 5); + card->hw.plxsize = pci_resource_len(pdev, 5); + + switch (device_id) { + case PCI_DEVICE_ID_PC300_RX_1: + case PCI_DEVICE_ID_PC300_TE_1: + case PCI_DEVICE_ID_PC300_TE_M_1: + card->hw.nchan = 1; + break; + + case PCI_DEVICE_ID_PC300_RX_2: + case PCI_DEVICE_ID_PC300_TE_2: + case PCI_DEVICE_ID_PC300_TE_M_2: + default: + card->hw.nchan = PC300_MAXCHAN; + break; + } +#ifdef PC300_DEBUG_PCI + printk("cpc (bus=0x0%x,pci_id=0x%x,", pdev->bus->number, pdev->devfn); + printk("rev_id=%d) IRQ%d\n", pdev->revision, card->hw.irq); + printk("cpc:found ramaddr=0x%08lx plxaddr=0x%08lx " + "ctladdr=0x%08lx falcaddr=0x%08lx\n", + card->hw.ramphys, card->hw.plxphys, card->hw.scaphys, + card->hw.falcphys); +#endif + /* Although we don't use this I/O region, we should + * request it from the kernel anyway, to avoid problems + * with other drivers accessing it. */ + if (!request_region(card->hw.iophys, card->hw.iosize, "PLX Registers")) { + /* In case we can't allocate it, warn user */ + printk("WARNING: couldn't allocate I/O region for PC300 board " + "at 0x%08x!\n", card->hw.ramphys); + } + + if (card->hw.plxphys) { + pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, card->hw.plxphys); + } else { + eeprom_outdated = 1; + card->hw.plxphys = pci_resource_start(pdev, 0); + card->hw.plxsize = pci_resource_len(pdev, 0); + } + + if (!request_mem_region(card->hw.plxphys, card->hw.plxsize, + "PLX Registers")) { + printk("PC300 found at RAM 0x%08x, " + "but could not allocate PLX mem region.\n", + card->hw.ramphys); + goto err_release_io; + } + if (!request_mem_region(card->hw.ramphys, card->hw.alloc_ramsize, + "On-board RAM")) { + printk("PC300 found at RAM 0x%08x, " + "but could not allocate RAM mem region.\n", + card->hw.ramphys); + goto err_release_plx; + } + if (!request_mem_region(card->hw.scaphys, card->hw.scasize, + "SCA-II Registers")) { + printk("PC300 found at RAM 0x%08x, " + "but could not allocate SCA mem region.\n", + card->hw.ramphys); + goto err_release_ram; + } + + card->hw.plxbase = ioremap(card->hw.plxphys, card->hw.plxsize); + card->hw.rambase = ioremap(card->hw.ramphys, card->hw.alloc_ramsize); + card->hw.scabase = ioremap(card->hw.scaphys, card->hw.scasize); + switch (device_id) { + case PCI_DEVICE_ID_PC300_TE_1: + case PCI_DEVICE_ID_PC300_TE_2: + case PCI_DEVICE_ID_PC300_TE_M_1: + case PCI_DEVICE_ID_PC300_TE_M_2: + request_mem_region(card->hw.falcphys, card->hw.falcsize, + "FALC Registers"); + card->hw.falcbase = ioremap(card->hw.falcphys, card->hw.falcsize); + break; + + case PCI_DEVICE_ID_PC300_RX_1: + case PCI_DEVICE_ID_PC300_RX_2: + default: + card->hw.falcbase = NULL; + break; + } + +#ifdef PC300_DEBUG_PCI + printk("cpc: relocate ramaddr=0x%08lx plxaddr=0x%08lx " + "ctladdr=0x%08lx falcaddr=0x%08lx\n", + card->hw.rambase, card->hw.plxbase, card->hw.scabase, + card->hw.falcbase); +#endif + + /* Set PCI drv pointer to the card structure */ + pci_set_drvdata(pdev, card); + + /* Set board type */ + switch (device_id) { + case PCI_DEVICE_ID_PC300_TE_1: + case PCI_DEVICE_ID_PC300_TE_2: + case PCI_DEVICE_ID_PC300_TE_M_1: + case PCI_DEVICE_ID_PC300_TE_M_2: + card->hw.type = PC300_TE; + + if ((device_id == PCI_DEVICE_ID_PC300_TE_M_1) || + (device_id == PCI_DEVICE_ID_PC300_TE_M_2)) { + card->hw.bus = PC300_PMC; + /* Set PLX register offsets */ + card->hw.gpioc_reg = 0x54; + card->hw.intctl_reg = 0x4c; + } else { + card->hw.bus = PC300_PCI; + /* Set PLX register offsets */ + card->hw.gpioc_reg = 0x50; + card->hw.intctl_reg = 0x4c; + } + break; + + case PCI_DEVICE_ID_PC300_RX_1: + case PCI_DEVICE_ID_PC300_RX_2: + default: + card->hw.bus = PC300_PCI; + /* Set PLX register offsets */ + card->hw.gpioc_reg = 0x50; + card->hw.intctl_reg = 0x4c; + + if ((cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) & PC300_CTYPE_MASK)) { + card->hw.type = PC300_X21; + } else { + card->hw.type = PC300_RSV; + } + break; + } + + /* Allocate IRQ */ + if (request_irq(card->hw.irq, cpc_intr, IRQF_SHARED, "Cyclades-PC300", card)) { + printk ("PC300 found at RAM 0x%08x, but could not allocate IRQ%d.\n", + card->hw.ramphys, card->hw.irq); + goto err_io_unmap; + } + + cpc_init_card(card); + + if (eeprom_outdated) + printk("WARNING: PC300 with outdated EEPROM.\n"); + return 0; + +err_io_unmap: + iounmap(card->hw.plxbase); + iounmap(card->hw.scabase); + iounmap(card->hw.rambase); + if (card->hw.type == PC300_TE) { + iounmap(card->hw.falcbase); + release_mem_region(card->hw.falcphys, card->hw.falcsize); + } + release_mem_region(card->hw.scaphys, card->hw.scasize); +err_release_ram: + release_mem_region(card->hw.ramphys, card->hw.alloc_ramsize); +err_release_plx: + release_mem_region(card->hw.plxphys, card->hw.plxsize); +err_release_io: + release_region(card->hw.iophys, card->hw.iosize); + kfree(card); +err_disable_dev: + pci_disable_device(pdev); + return err; +} + +static void __devexit cpc_remove_one(struct pci_dev *pdev) +{ + pc300_t *card = pci_get_drvdata(pdev); + + if (card->hw.rambase) { + int i; + + /* Disable interrupts on the PCI bridge */ + cpc_writew(card->hw.plxbase + card->hw.intctl_reg, + cpc_readw(card->hw.plxbase + card->hw.intctl_reg) & ~(0x0040)); + + for (i = 0; i < card->hw.nchan; i++) { + unregister_hdlc_device(card->chan[i].d.dev); + } + iounmap(card->hw.plxbase); + iounmap(card->hw.scabase); + iounmap(card->hw.rambase); + release_mem_region(card->hw.plxphys, card->hw.plxsize); + release_mem_region(card->hw.ramphys, card->hw.alloc_ramsize); + release_mem_region(card->hw.scaphys, card->hw.scasize); + release_region(card->hw.iophys, card->hw.iosize); + if (card->hw.type == PC300_TE) { + iounmap(card->hw.falcbase); + release_mem_region(card->hw.falcphys, card->hw.falcsize); + } + for (i = 0; i < card->hw.nchan; i++) + if (card->chan[i].d.dev) + free_netdev(card->chan[i].d.dev); + if (card->hw.irq) + free_irq(card->hw.irq, card); + kfree(card); + pci_disable_device(pdev); + } +} + +static struct pci_driver cpc_driver = { + .name = "pc300", + .id_table = cpc_pci_dev_id, + .probe = cpc_init_one, + .remove = __devexit_p(cpc_remove_one), +}; + +static int __init cpc_init(void) +{ + show_version(); + return pci_register_driver(&cpc_driver); +} + +static void __exit cpc_cleanup_module(void) +{ + pci_unregister_driver(&cpc_driver); +} + +module_init(cpc_init); +module_exit(cpc_cleanup_module); + +MODULE_DESCRIPTION("Cyclades-PC300 cards driver"); +MODULE_AUTHOR( "Author: Ivan Passos <ivan@cyclades.com>\r\n" + "Maintainer: PC300 Maintainer <pc300@cyclades.com"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/staging/net/pc300_tty.c b/drivers/staging/net/pc300_tty.c new file mode 100644 index 000000000000..4709f4228561 --- /dev/null +++ b/drivers/staging/net/pc300_tty.c @@ -0,0 +1,1079 @@ +/* + * pc300_tty.c Cyclades-PC300(tm) TTY Driver. + * + * Author: Regina Kodato <reginak@cyclades.com> + * + * Copyright: (c) 1999-2002 Cyclades Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * $Log: pc300_tty.c,v $ + * Revision 3.7 2002/03/07 14:17:09 henrique + * License data fixed + * + * Revision 3.6 2001/12/10 12:29:42 regina + * Fix the MLPPP bug + * + * Revision 3.5 2001/10/31 11:20:05 regina + * automatic pppd starts + * + * Revision 3.4 2001/08/06 12:01:51 regina + * problem in DSR_DE bit + * + * Revision 3.3 2001/07/26 22:58:41 regina + * update EDA value + * + * Revision 3.2 2001/07/12 13:11:20 regina + * bug fix - DCD-OFF in pc300 tty driver + * + * DMA transmission bug fix + * + * Revision 3.1 2001/06/22 13:13:02 regina + * MLPPP implementation + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/if.h> +#include <linux/skbuff.h> +/* TTY includes */ +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> + +#include <asm/io.h> +#include <asm/uaccess.h> + +#include "pc300.h" + +/* defines and macros */ +/* TTY Global definitions */ +#define CPC_TTY_NPORTS 8 /* maximum number of the sync tty connections */ +#define CPC_TTY_MAJOR CYCLADES_MAJOR +#define CPC_TTY_MINOR_START 240 /* minor of the first PC300 interface */ + +#define CPC_TTY_MAX_MTU 2000 + +/* tty interface state */ +#define CPC_TTY_ST_IDLE 0 +#define CPC_TTY_ST_INIT 1 /* configured with MLPPP and up */ +#define CPC_TTY_ST_OPEN 2 /* opened by application */ + +#define CPC_TTY_LOCK(card,flags)\ + do {\ + spin_lock_irqsave(&card->card_lock, flags); \ + } while (0) + +#define CPC_TTY_UNLOCK(card,flags) \ + do {\ + spin_unlock_irqrestore(&card->card_lock, flags); \ + } while (0) + +//#define CPC_TTY_DBG(format,a...) printk(format,##a) +#define CPC_TTY_DBG(format,a...) + +/* data structures */ +typedef struct _st_cpc_rx_buf { + struct _st_cpc_rx_buf *next; + int size; + unsigned char data[1]; +} st_cpc_rx_buf; + +struct st_cpc_rx_list { + st_cpc_rx_buf *first; + st_cpc_rx_buf *last; +}; + +typedef struct _st_cpc_tty_area { + int state; /* state of the TTY interface */ + int num_open; + unsigned int tty_minor; /* minor this interface */ + volatile struct st_cpc_rx_list buf_rx; /* ptr. to reception buffer */ + unsigned char* buf_tx; /* ptr. to transmission buffer */ + pc300dev_t* pc300dev; /* ptr. to info struct in PC300 driver */ + unsigned char name[20]; /* interf. name + "-tty" */ + struct tty_struct *tty; + struct work_struct tty_tx_work; /* tx work - tx interrupt */ + struct work_struct tty_rx_work; /* rx work - rx interrupt */ + } st_cpc_tty_area; + +/* TTY data structures */ +static struct tty_driver serial_drv; + +/* local variables */ +static st_cpc_tty_area cpc_tty_area[CPC_TTY_NPORTS]; + +static int cpc_tty_cnt = 0; /* number of intrfaces configured with MLPPP */ +static int cpc_tty_unreg_flag = 0; + +/* TTY functions prototype */ +static int cpc_tty_open(struct tty_struct *tty, struct file *flip); +static void cpc_tty_close(struct tty_struct *tty, struct file *flip); +static int cpc_tty_write(struct tty_struct *tty, const unsigned char *buf, int count); +static int cpc_tty_write_room(struct tty_struct *tty); +static int cpc_tty_chars_in_buffer(struct tty_struct *tty); +static void cpc_tty_flush_buffer(struct tty_struct *tty); +static void cpc_tty_hangup(struct tty_struct *tty); +static void cpc_tty_rx_work(struct work_struct *work); +static void cpc_tty_tx_work(struct work_struct *work); +static int cpc_tty_send_to_card(pc300dev_t *dev,void *buf, int len); +static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx); +static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char); +static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char); + +static int pc300_tiocmset(struct tty_struct *, unsigned int, unsigned int); +static int pc300_tiocmget(struct tty_struct *); + +/* functions called by PC300 driver */ +void cpc_tty_init(pc300dev_t *dev); +void cpc_tty_unregister_service(pc300dev_t *pc300dev); +void cpc_tty_receive(pc300dev_t *pc300dev); +void cpc_tty_trigger_poll(pc300dev_t *pc300dev); + +/* + * PC300 TTY clear "signal" + */ +static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char signal) +{ + pc300ch_t *pc300chan = (pc300ch_t *)pc300dev->chan; + pc300_t *card = (pc300_t *) pc300chan->card; + int ch = pc300chan->channel; + unsigned long flags; + + CPC_TTY_DBG("%s-tty: Clear signal %x\n", + pc300dev->dev->name, signal); + CPC_TTY_LOCK(card, flags); + cpc_writeb(card->hw.scabase + M_REG(CTL,ch), + cpc_readb(card->hw.scabase+M_REG(CTL,ch))& signal); + CPC_TTY_UNLOCK(card,flags); +} + +/* + * PC300 TTY set "signal" to ON + */ +static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char signal) +{ + pc300ch_t *pc300chan = (pc300ch_t *)pc300dev->chan; + pc300_t *card = (pc300_t *) pc300chan->card; + int ch = pc300chan->channel; + unsigned long flags; + + CPC_TTY_DBG("%s-tty: Set signal %x\n", + pc300dev->dev->name, signal); + CPC_TTY_LOCK(card, flags); + cpc_writeb(card->hw.scabase + M_REG(CTL,ch), + cpc_readb(card->hw.scabase+M_REG(CTL,ch))& ~signal); + CPC_TTY_UNLOCK(card,flags); +} + + +static const struct tty_operations pc300_ops = { + .open = cpc_tty_open, + .close = cpc_tty_close, + .write = cpc_tty_write, + .write_room = cpc_tty_write_room, + .chars_in_buffer = cpc_tty_chars_in_buffer, + .tiocmset = pc300_tiocmset, + .tiocmget = pc300_tiocmget, + .flush_buffer = cpc_tty_flush_buffer, + .hangup = cpc_tty_hangup, +}; + + +/* + * PC300 TTY initialization routine + * + * This routine is called by the PC300 driver during board configuration + * (ioctl=SIOCSP300CONF). At this point the adapter is completely + * initialized. + * o verify kernel version (only 2.4.x) + * o register TTY driver + * o init cpc_tty_area struct + */ +void cpc_tty_init(pc300dev_t *pc300dev) +{ + unsigned long port; + int aux; + st_cpc_tty_area * cpc_tty; + + /* hdlcX - X=interface number */ + port = pc300dev->dev->name[4] - '0'; + if (port >= CPC_TTY_NPORTS) { + printk("%s-tty: invalid interface selected (0-%i): %li", + pc300dev->dev->name, + CPC_TTY_NPORTS-1,port); + return; + } + + if (cpc_tty_cnt == 0) { /* first TTY connection -> register driver */ + CPC_TTY_DBG("%s-tty: driver init, major:%i, minor range:%i=%i\n", + pc300dev->dev->name, + CPC_TTY_MAJOR, CPC_TTY_MINOR_START, + CPC_TTY_MINOR_START+CPC_TTY_NPORTS); + /* initialize tty driver struct */ + memset(&serial_drv,0,sizeof(struct tty_driver)); + serial_drv.magic = TTY_DRIVER_MAGIC; + serial_drv.owner = THIS_MODULE; + serial_drv.driver_name = "pc300_tty"; + serial_drv.name = "ttyCP"; + serial_drv.major = CPC_TTY_MAJOR; + serial_drv.minor_start = CPC_TTY_MINOR_START; + serial_drv.num = CPC_TTY_NPORTS; + serial_drv.type = TTY_DRIVER_TYPE_SERIAL; + serial_drv.subtype = SERIAL_TYPE_NORMAL; + + serial_drv.init_termios = tty_std_termios; + serial_drv.init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; + serial_drv.flags = TTY_DRIVER_REAL_RAW; + + /* interface routines from the upper tty layer to the tty driver */ + tty_set_operations(&serial_drv, &pc300_ops); + + /* register the TTY driver */ + if (tty_register_driver(&serial_drv)) { + printk("%s-tty: Failed to register serial driver! ", + pc300dev->dev->name); + return; + } + + memset((void *)cpc_tty_area, 0, + sizeof(st_cpc_tty_area) * CPC_TTY_NPORTS); + } + + cpc_tty = &cpc_tty_area[port]; + + if (cpc_tty->state != CPC_TTY_ST_IDLE) { + CPC_TTY_DBG("%s-tty: TTY port %i, already in use.\n", + pc300dev->dev->name, port); + return; + } + + cpc_tty_cnt++; + cpc_tty->state = CPC_TTY_ST_INIT; + cpc_tty->num_open= 0; + cpc_tty->tty_minor = port + CPC_TTY_MINOR_START; + cpc_tty->pc300dev = pc300dev; + + INIT_WORK(&cpc_tty->tty_tx_work, cpc_tty_tx_work); + INIT_WORK(&cpc_tty->tty_rx_work, cpc_tty_rx_work); + + cpc_tty->buf_rx.first = cpc_tty->buf_rx.last = NULL; + + pc300dev->cpc_tty = (void *)cpc_tty; + + aux = strlen(pc300dev->dev->name); + memcpy(cpc_tty->name, pc300dev->dev->name, aux); + memcpy(&cpc_tty->name[aux], "-tty", 5); + + cpc_open(pc300dev->dev); + cpc_tty_signal_off(pc300dev, CTL_DTR); + + CPC_TTY_DBG("%s: Initializing TTY Sync Driver, tty major#%d minor#%i\n", + cpc_tty->name,CPC_TTY_MAJOR,cpc_tty->tty_minor); + return; +} + +/* + * PC300 TTY OPEN routine + * + * This routine is called by the tty driver to open the interface + * o verify minor + * o allocate buffer to Rx and Tx + */ +static int cpc_tty_open(struct tty_struct *tty, struct file *flip) +{ + int port ; + st_cpc_tty_area *cpc_tty; + + if (!tty) { + return -ENODEV; + } + + port = tty->index; + + if ((port < 0) || (port >= CPC_TTY_NPORTS)){ + CPC_TTY_DBG("pc300_tty: open invalid port %d\n", port); + return -ENODEV; + } + + cpc_tty = &cpc_tty_area[port]; + + if (cpc_tty->state == CPC_TTY_ST_IDLE){ + CPC_TTY_DBG("%s: open - invalid interface, port=%d\n", + cpc_tty->name, tty->index); + return -ENODEV; + } + + if (cpc_tty->num_open == 0) { /* first open of this tty */ + if (!cpc_tty_area[port].buf_tx){ + cpc_tty_area[port].buf_tx = kmalloc(CPC_TTY_MAX_MTU,GFP_KERNEL); + if (!cpc_tty_area[port].buf_tx) { + CPC_TTY_DBG("%s: error in memory allocation\n",cpc_tty->name); + return -ENOMEM; + } + } + + if (cpc_tty_area[port].buf_rx.first) { + unsigned char * aux; + while (cpc_tty_area[port].buf_rx.first) { + aux = (unsigned char *)cpc_tty_area[port].buf_rx.first; + cpc_tty_area[port].buf_rx.first = cpc_tty_area[port].buf_rx.first->next; + kfree(aux); + } + cpc_tty_area[port].buf_rx.first = NULL; + cpc_tty_area[port].buf_rx.last = NULL; + } + + cpc_tty_area[port].state = CPC_TTY_ST_OPEN; + cpc_tty_area[port].tty = tty; + tty->driver_data = &cpc_tty_area[port]; + + cpc_tty_signal_on(cpc_tty->pc300dev, CTL_DTR); + } + + cpc_tty->num_open++; + + CPC_TTY_DBG("%s: opening TTY driver\n", cpc_tty->name); + + /* avisar driver PC300 */ + return 0; +} + +/* + * PC300 TTY CLOSE routine + * + * This routine is called by the tty driver to close the interface + * o call close channel in PC300 driver (cpc_closech) + * o free Rx and Tx buffers + */ + +static void cpc_tty_close(struct tty_struct *tty, struct file *flip) +{ + st_cpc_tty_area *cpc_tty; + unsigned long flags; + int res; + + if (!tty || !tty->driver_data ) { + CPC_TTY_DBG("hdlx-tty: no TTY in close\n"); + return; + } + + cpc_tty = (st_cpc_tty_area *) tty->driver_data; + + if ((cpc_tty->tty != tty)|| (cpc_tty->state != CPC_TTY_ST_OPEN)) { + CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name); + return; + } + + if (!cpc_tty->num_open) { + CPC_TTY_DBG("%s: TTY is closed\n",cpc_tty->name); + return; + } + + if (--cpc_tty->num_open > 0) { + CPC_TTY_DBG("%s: TTY closed\n",cpc_tty->name); + return; + } + + cpc_tty_signal_off(cpc_tty->pc300dev, CTL_DTR); + + CPC_TTY_LOCK(cpc_tty->pc300dev->chan->card, flags); /* lock irq */ + cpc_tty->tty = NULL; + cpc_tty->state = CPC_TTY_ST_INIT; + CPC_TTY_UNLOCK(cpc_tty->pc300dev->chan->card, flags); /* unlock irq */ + + if (cpc_tty->buf_rx.first) { + unsigned char * aux; + while (cpc_tty->buf_rx.first) { + aux = (unsigned char *)cpc_tty->buf_rx.first; + cpc_tty->buf_rx.first = cpc_tty->buf_rx.first->next; + kfree(aux); + } + cpc_tty->buf_rx.first = NULL; + cpc_tty->buf_rx.last = NULL; + } + + kfree(cpc_tty->buf_tx); + cpc_tty->buf_tx = NULL; + + CPC_TTY_DBG("%s: TTY closed\n",cpc_tty->name); + + if (!serial_drv.refcount && cpc_tty_unreg_flag) { + cpc_tty_unreg_flag = 0; + CPC_TTY_DBG("%s: unregister the tty driver\n", cpc_tty->name); + if ((res=tty_unregister_driver(&serial_drv))) { + CPC_TTY_DBG("%s: ERROR ->unregister the tty driver error=%d\n", + cpc_tty->name,res); + } + } + return; +} + +/* + * PC300 TTY WRITE routine + * + * This routine is called by the tty driver to write a series of characters + * to the tty device. The characters may come from user or kernel space. + * o verify the DCD signal + * o send characters to board and start the transmission + */ +static int cpc_tty_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + st_cpc_tty_area *cpc_tty; + pc300ch_t *pc300chan; + pc300_t *card; + int ch; + unsigned long flags; + struct net_device_stats *stats; + + if (!tty || !tty->driver_data ) { + CPC_TTY_DBG("hdlcX-tty: no TTY in write\n"); + return -ENODEV; + } + + cpc_tty = (st_cpc_tty_area *) tty->driver_data; + + if ((cpc_tty->tty != tty) || (cpc_tty->state != CPC_TTY_ST_OPEN)) { + CPC_TTY_DBG("%s: TTY is not opened\n", cpc_tty->name); + return -ENODEV; + } + + if (count > CPC_TTY_MAX_MTU) { + CPC_TTY_DBG("%s: count is invalid\n",cpc_tty->name); + return -EINVAL; /* frame too big */ + } + + CPC_TTY_DBG("%s: cpc_tty_write data len=%i\n",cpc_tty->name,count); + + pc300chan = (pc300ch_t *)((pc300dev_t*)cpc_tty->pc300dev)->chan; + stats = &cpc_tty->pc300dev->dev->stats; + card = (pc300_t *) pc300chan->card; + ch = pc300chan->channel; + + /* verify DCD signal*/ + if (cpc_readb(card->hw.scabase + M_REG(ST3,ch)) & ST3_DCD) { + /* DCD is OFF */ + CPC_TTY_DBG("%s : DCD is OFF\n", cpc_tty->name); + stats->tx_errors++; + stats->tx_carrier_errors++; + CPC_TTY_LOCK(card, flags); + cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_BUF_CLR); + + if (card->hw.type == PC300_TE) { + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) & + ~(CPLD_REG2_FALC_LED1 << (2 *ch))); + } + + CPC_TTY_UNLOCK(card, flags); + + return -EINVAL; + } + + if (cpc_tty_send_to_card(cpc_tty->pc300dev, (void*)buf, count)) { + /* failed to send */ + CPC_TTY_DBG("%s: trasmition error\n", cpc_tty->name); + return 0; + } + return count; +} + +/* + * PC300 TTY Write Room routine + * + * This routine returns the numbers of characteres the tty driver will accept + * for queuing to be written. + * o return MTU + */ +static int cpc_tty_write_room(struct tty_struct *tty) +{ + st_cpc_tty_area *cpc_tty; + + if (!tty || !tty->driver_data ) { + CPC_TTY_DBG("hdlcX-tty: no TTY to write room\n"); + return -ENODEV; + } + + cpc_tty = (st_cpc_tty_area *) tty->driver_data; + + if ((cpc_tty->tty != tty) || (cpc_tty->state != CPC_TTY_ST_OPEN)) { + CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name); + return -ENODEV; + } + + CPC_TTY_DBG("%s: write room\n",cpc_tty->name); + + return CPC_TTY_MAX_MTU; +} + +/* + * PC300 TTY chars in buffer routine + * + * This routine returns the chars number in the transmission buffer + * o returns 0 + */ +static int cpc_tty_chars_in_buffer(struct tty_struct *tty) +{ + st_cpc_tty_area *cpc_tty; + + if (!tty || !tty->driver_data ) { + CPC_TTY_DBG("hdlcX-tty: no TTY to chars in buffer\n"); + return -ENODEV; + } + + cpc_tty = (st_cpc_tty_area *) tty->driver_data; + + if ((cpc_tty->tty != tty) || (cpc_tty->state != CPC_TTY_ST_OPEN)) { + CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name); + return -ENODEV; + } + + return 0; +} + +static int pc300_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + st_cpc_tty_area *cpc_tty; + + CPC_TTY_DBG("%s: set:%x clear:%x\n", __func__, set, clear); + + if (!tty || !tty->driver_data ) { + CPC_TTY_DBG("hdlcX-tty: no TTY to chars in buffer\n"); + return -ENODEV; + } + + cpc_tty = (st_cpc_tty_area *) tty->driver_data; + + if (set & TIOCM_RTS) + cpc_tty_signal_on(cpc_tty->pc300dev, CTL_RTS); + if (set & TIOCM_DTR) + cpc_tty_signal_on(cpc_tty->pc300dev, CTL_DTR); + + if (clear & TIOCM_RTS) + cpc_tty_signal_off(cpc_tty->pc300dev, CTL_RTS); + if (clear & TIOCM_DTR) + cpc_tty_signal_off(cpc_tty->pc300dev, CTL_DTR); + + return 0; +} + +static int pc300_tiocmget(struct tty_struct *tty) +{ + unsigned int result; + unsigned char status; + unsigned long flags; + st_cpc_tty_area *cpc_tty = (st_cpc_tty_area *) tty->driver_data; + pc300dev_t *pc300dev = cpc_tty->pc300dev; + pc300ch_t *pc300chan = (pc300ch_t *)pc300dev->chan; + pc300_t *card = (pc300_t *) pc300chan->card; + int ch = pc300chan->channel; + + cpc_tty = (st_cpc_tty_area *) tty->driver_data; + + CPC_TTY_DBG("%s-tty: tiocmget\n", + ((struct net_device*)(pc300dev->hdlc))->name); + + CPC_TTY_LOCK(card, flags); + status = cpc_readb(card->hw.scabase+M_REG(CTL,ch)); + CPC_TTY_UNLOCK(card,flags); + + result = ((status & CTL_DTR) ? TIOCM_DTR : 0) | + ((status & CTL_RTS) ? TIOCM_RTS : 0); + + return result; +} + +/* + * PC300 TTY Flush Buffer routine + * + * This routine resets the transmission buffer + */ +static void cpc_tty_flush_buffer(struct tty_struct *tty) +{ + st_cpc_tty_area *cpc_tty; + + if (!tty || !tty->driver_data ) { + CPC_TTY_DBG("hdlcX-tty: no TTY to flush buffer\n"); + return; + } + + cpc_tty = (st_cpc_tty_area *) tty->driver_data; + + if ((cpc_tty->tty != tty) || (cpc_tty->state != CPC_TTY_ST_OPEN)) { + CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name); + return; + } + + CPC_TTY_DBG("%s: call wake_up_interruptible\n",cpc_tty->name); + + tty_wakeup(tty); + return; +} + +/* + * PC300 TTY Hangup routine + * + * This routine is called by the tty driver to hangup the interface + * o clear DTR signal + */ + +static void cpc_tty_hangup(struct tty_struct *tty) +{ + st_cpc_tty_area *cpc_tty; + int res; + + if (!tty || !tty->driver_data ) { + CPC_TTY_DBG("hdlcX-tty: no TTY to hangup\n"); + return ; + } + + cpc_tty = (st_cpc_tty_area *) tty->driver_data; + + if ((cpc_tty->tty != tty) || (cpc_tty->state != CPC_TTY_ST_OPEN)) { + CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name); + return ; + } + if (!serial_drv.refcount && cpc_tty_unreg_flag) { + cpc_tty_unreg_flag = 0; + CPC_TTY_DBG("%s: unregister the tty driver\n", cpc_tty->name); + if ((res=tty_unregister_driver(&serial_drv))) { + CPC_TTY_DBG("%s: ERROR ->unregister the tty driver error=%d\n", + cpc_tty->name,res); + } + } + cpc_tty_signal_off(cpc_tty->pc300dev, CTL_DTR); +} + +/* + * PC300 TTY RX work routine + * This routine treats RX work + * o verify read buffer + * o call the line disc. read + * o free memory + */ +static void cpc_tty_rx_work(struct work_struct *work) +{ + st_cpc_tty_area *cpc_tty; + unsigned long port; + int i, j; + volatile st_cpc_rx_buf *buf; + char flags=0,flg_rx=1; + struct tty_ldisc *ld; + + if (cpc_tty_cnt == 0) return; + + for (i=0; (i < 4) && flg_rx ; i++) { + flg_rx = 0; + + cpc_tty = container_of(work, st_cpc_tty_area, tty_rx_work); + port = cpc_tty - cpc_tty_area; + + for (j=0; j < CPC_TTY_NPORTS; j++) { + cpc_tty = &cpc_tty_area[port]; + + if ((buf=cpc_tty->buf_rx.first) != NULL) { + if (cpc_tty->tty) { + ld = tty_ldisc_ref(cpc_tty->tty); + if (ld) { + if (ld->ops->receive_buf) { + CPC_TTY_DBG("%s: call line disc. receive_buf\n",cpc_tty->name); + ld->ops->receive_buf(cpc_tty->tty, (char *)(buf->data), &flags, buf->size); + } + tty_ldisc_deref(ld); + } + } + cpc_tty->buf_rx.first = cpc_tty->buf_rx.first->next; + kfree((void *)buf); + buf = cpc_tty->buf_rx.first; + flg_rx = 1; + } + if (++port == CPC_TTY_NPORTS) port = 0; + } + } +} + +/* + * PC300 TTY RX work routine + * + * This routine treats RX interrupt. + * o read all frames in card + * o verify the frame size + * o read the frame in rx buffer + */ +static void cpc_tty_rx_disc_frame(pc300ch_t *pc300chan) +{ + volatile pcsca_bd_t __iomem * ptdescr; + volatile unsigned char status; + pc300_t *card = (pc300_t *)pc300chan->card; + int ch = pc300chan->channel; + + /* dma buf read */ + ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + + RX_BD_ADDR(ch, pc300chan->rx_first_bd)); + while (pc300chan->rx_first_bd != pc300chan->rx_last_bd) { + status = cpc_readb(&ptdescr->status); + cpc_writeb(&ptdescr->status, 0); + cpc_writeb(&ptdescr->len, 0); + pc300chan->rx_first_bd = (pc300chan->rx_first_bd + 1) & + (N_DMA_RX_BUF - 1); + if (status & DST_EOM) { + break; /* end of message */ + } + ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + cpc_readl(&ptdescr->next)); + } +} + +void cpc_tty_receive(pc300dev_t *pc300dev) +{ + st_cpc_tty_area *cpc_tty; + pc300ch_t *pc300chan = (pc300ch_t *)pc300dev->chan; + pc300_t *card = (pc300_t *)pc300chan->card; + int ch = pc300chan->channel; + volatile pcsca_bd_t __iomem * ptdescr; + struct net_device_stats *stats = &pc300dev->dev->stats; + int rx_len, rx_aux; + volatile unsigned char status; + unsigned short first_bd = pc300chan->rx_first_bd; + st_cpc_rx_buf *new = NULL; + unsigned char dsr_rx; + + if (pc300dev->cpc_tty == NULL) { + return; + } + + dsr_rx = cpc_readb(card->hw.scabase + DSR_RX(ch)); + + cpc_tty = pc300dev->cpc_tty; + + while (1) { + rx_len = 0; + ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + RX_BD_ADDR(ch, first_bd)); + while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) { + rx_len += cpc_readw(&ptdescr->len); + first_bd = (first_bd + 1) & (N_DMA_RX_BUF - 1); + if (status & DST_EOM) { + break; + } + ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase+cpc_readl(&ptdescr->next)); + } + + if (!rx_len) { + if (dsr_rx & DSR_BOF) { + /* update EDA */ + cpc_writel(card->hw.scabase + DRX_REG(EDAL, ch), + RX_BD_ADDR(ch, pc300chan->rx_last_bd)); + } + kfree(new); + return; + } + + if (rx_len > CPC_TTY_MAX_MTU) { + /* Free RX descriptors */ + CPC_TTY_DBG("%s: frame size is invalid.\n",cpc_tty->name); + stats->rx_errors++; + stats->rx_frame_errors++; + cpc_tty_rx_disc_frame(pc300chan); + continue; + } + + new = kmalloc(rx_len + sizeof(st_cpc_rx_buf), GFP_ATOMIC); + if (!new) { + cpc_tty_rx_disc_frame(pc300chan); + continue; + } + + /* dma buf read */ + ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + + RX_BD_ADDR(ch, pc300chan->rx_first_bd)); + + rx_len = 0; /* counter frame size */ + + while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) { + rx_aux = cpc_readw(&ptdescr->len); + if ((status & (DST_OVR | DST_CRC | DST_RBIT | DST_SHRT | DST_ABT)) + || (rx_aux > BD_DEF_LEN)) { + CPC_TTY_DBG("%s: reception error\n", cpc_tty->name); + stats->rx_errors++; + if (status & DST_OVR) { + stats->rx_fifo_errors++; + } + if (status & DST_CRC) { + stats->rx_crc_errors++; + } + if ((status & (DST_RBIT | DST_SHRT | DST_ABT)) || + (rx_aux > BD_DEF_LEN)) { + stats->rx_frame_errors++; + } + /* discard remainig descriptors used by the bad frame */ + CPC_TTY_DBG("%s: reception error - discard descriptors", + cpc_tty->name); + cpc_tty_rx_disc_frame(pc300chan); + rx_len = 0; + kfree(new); + new = NULL; + break; /* read next frame - while(1) */ + } + + if (cpc_tty->state != CPC_TTY_ST_OPEN) { + /* Free RX descriptors */ + cpc_tty_rx_disc_frame(pc300chan); + stats->rx_dropped++; + rx_len = 0; + kfree(new); + new = NULL; + break; /* read next frame - while(1) */ + } + + /* read the segment of the frame */ + if (rx_aux != 0) { + memcpy_fromio((new->data + rx_len), + (void __iomem *)(card->hw.rambase + + cpc_readl(&ptdescr->ptbuf)), rx_aux); + rx_len += rx_aux; + } + cpc_writeb(&ptdescr->status,0); + cpc_writeb(&ptdescr->len, 0); + pc300chan->rx_first_bd = (pc300chan->rx_first_bd + 1) & + (N_DMA_RX_BUF -1); + if (status & DST_EOM)break; + + ptdescr = (pcsca_bd_t __iomem *) (card->hw.rambase + + cpc_readl(&ptdescr->next)); + } + /* update pointer */ + pc300chan->rx_last_bd = (pc300chan->rx_first_bd - 1) & + (N_DMA_RX_BUF - 1) ; + if (!(dsr_rx & DSR_BOF)) { + /* update EDA */ + cpc_writel(card->hw.scabase + DRX_REG(EDAL, ch), + RX_BD_ADDR(ch, pc300chan->rx_last_bd)); + } + if (rx_len != 0) { + stats->rx_bytes += rx_len; + + if (pc300dev->trace_on) { + cpc_tty_trace(pc300dev, new->data,rx_len, 'R'); + } + new->size = rx_len; + new->next = NULL; + if (cpc_tty->buf_rx.first == NULL) { + cpc_tty->buf_rx.first = new; + cpc_tty->buf_rx.last = new; + } else { + cpc_tty->buf_rx.last->next = new; + cpc_tty->buf_rx.last = new; + } + schedule_work(&(cpc_tty->tty_rx_work)); + stats->rx_packets++; + } + } +} + +/* + * PC300 TTY TX work routine + * + * This routine treats TX interrupt. + * o if need call line discipline wakeup + * o call wake_up_interruptible + */ +static void cpc_tty_tx_work(struct work_struct *work) +{ + st_cpc_tty_area *cpc_tty = + container_of(work, st_cpc_tty_area, tty_tx_work); + struct tty_struct *tty; + + CPC_TTY_DBG("%s: cpc_tty_tx_work init\n",cpc_tty->name); + + if ((tty = cpc_tty->tty) == NULL) { + CPC_TTY_DBG("%s: the interface is not opened\n",cpc_tty->name); + return; + } + tty_wakeup(tty); +} + +/* + * PC300 TTY send to card routine + * + * This routine send data to card. + * o clear descriptors + * o write data to DMA buffers + * o start the transmission + */ +static int cpc_tty_send_to_card(pc300dev_t *dev,void* buf, int len) +{ + pc300ch_t *chan = (pc300ch_t *)dev->chan; + pc300_t *card = (pc300_t *)chan->card; + int ch = chan->channel; + struct net_device_stats *stats = &dev->dev->stats; + unsigned long flags; + volatile pcsca_bd_t __iomem *ptdescr; + int i, nchar; + int tosend = len; + int nbuf = ((len - 1)/BD_DEF_LEN) + 1; + unsigned char *pdata=buf; + + CPC_TTY_DBG("%s:cpc_tty_send_to_cars len=%i", + (st_cpc_tty_area *)dev->cpc_tty->name,len); + + if (nbuf >= card->chan[ch].nfree_tx_bd) { + return 1; + } + + /* write buffer to DMA buffers */ + CPC_TTY_DBG("%s: call dma_buf_write\n", + (st_cpc_tty_area *)dev->cpc_tty->name); + for (i = 0 ; i < nbuf ; i++) { + ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + + TX_BD_ADDR(ch, card->chan[ch].tx_next_bd)); + nchar = (BD_DEF_LEN > tosend) ? tosend : BD_DEF_LEN; + if (cpc_readb(&ptdescr->status) & DST_OSB) { + memcpy_toio((void __iomem *)(card->hw.rambase + + cpc_readl(&ptdescr->ptbuf)), + &pdata[len - tosend], + nchar); + card->chan[ch].nfree_tx_bd--; + if ((i + 1) == nbuf) { + /* This must be the last BD to be used */ + cpc_writeb(&ptdescr->status, DST_EOM); + } else { + cpc_writeb(&ptdescr->status, 0); + } + cpc_writew(&ptdescr->len, nchar); + } else { + CPC_TTY_DBG("%s: error in dma_buf_write\n", + (st_cpc_tty_area *)dev->cpc_tty->name); + stats->tx_dropped++; + return 1; + } + tosend -= nchar; + card->chan[ch].tx_next_bd = + (card->chan[ch].tx_next_bd + 1) & (N_DMA_TX_BUF - 1); + } + + if (dev->trace_on) { + cpc_tty_trace(dev, buf, len,'T'); + } + + /* start transmission */ + CPC_TTY_DBG("%s: start transmission\n", + (st_cpc_tty_area *)dev->cpc_tty->name); + + CPC_TTY_LOCK(card, flags); + cpc_writeb(card->hw.scabase + DTX_REG(EDAL, ch), + TX_BD_ADDR(ch, chan->tx_next_bd)); + cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_ENA); + cpc_writeb(card->hw.scabase + DSR_TX(ch), DSR_DE); + + if (card->hw.type == PC300_TE) { + cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, + cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) | + (CPLD_REG2_FALC_LED1 << (2 * ch))); + } + CPC_TTY_UNLOCK(card, flags); + return 0; +} + +/* + * PC300 TTY trace routine + * + * This routine send trace of connection to application. + * o clear descriptors + * o write data to DMA buffers + * o start the transmission + */ + +static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx) +{ + struct sk_buff *skb; + + if ((skb = dev_alloc_skb(10 + len)) == NULL) { + /* out of memory */ + CPC_TTY_DBG("%s: tty_trace - out of memory\n", dev->dev->name); + return; + } + + skb_put (skb, 10 + len); + skb->dev = dev->dev; + skb->protocol = htons(ETH_P_CUST); + skb_reset_mac_header(skb); + skb->pkt_type = PACKET_HOST; + skb->len = 10 + len; + + skb_copy_to_linear_data(skb, dev->dev->name, 5); + skb->data[5] = '['; + skb->data[6] = rxtx; + skb->data[7] = ']'; + skb->data[8] = ':'; + skb->data[9] = ' '; + skb_copy_to_linear_data_offset(skb, 10, buf, len); + netif_rx(skb); +} + +/* + * PC300 TTY unregister service routine + * + * This routine unregister one interface. + */ +void cpc_tty_unregister_service(pc300dev_t *pc300dev) +{ + st_cpc_tty_area *cpc_tty; + ulong flags; + int res; + + if ((cpc_tty= (st_cpc_tty_area *) pc300dev->cpc_tty) == NULL) { + CPC_TTY_DBG("%s: interface is not TTY\n", pc300dev->dev->name); + return; + } + CPC_TTY_DBG("%s: cpc_tty_unregister_service", cpc_tty->name); + + if (cpc_tty->pc300dev != pc300dev) { + CPC_TTY_DBG("%s: invalid tty ptr=%s\n", + pc300dev->dev->name, cpc_tty->name); + return; + } + + if (--cpc_tty_cnt == 0) { + if (serial_drv.refcount) { + CPC_TTY_DBG("%s: unregister is not possible, refcount=%d", + cpc_tty->name, serial_drv.refcount); + cpc_tty_cnt++; + cpc_tty_unreg_flag = 1; + return; + } else { + CPC_TTY_DBG("%s: unregister the tty driver\n", cpc_tty->name); + if ((res=tty_unregister_driver(&serial_drv))) { + CPC_TTY_DBG("%s: ERROR ->unregister the tty driver error=%d\n", + cpc_tty->name,res); + } + } + } + CPC_TTY_LOCK(pc300dev->chan->card,flags); + cpc_tty->tty = NULL; + CPC_TTY_UNLOCK(pc300dev->chan->card, flags); + cpc_tty->tty_minor = 0; + cpc_tty->state = CPC_TTY_ST_IDLE; +} + +/* + * PC300 TTY trigger poll routine + * This routine is called by pc300driver to treats Tx interrupt. + */ +void cpc_tty_trigger_poll(pc300dev_t *pc300dev) +{ + st_cpc_tty_area *cpc_tty = (st_cpc_tty_area *)pc300dev->cpc_tty; + if (!cpc_tty) { + return; + } + schedule_work(&(cpc_tty->tty_tx_work)); +} |