1 files changed, 0 insertions, 149 deletions
diff --git a/drivers/staging/nokia_h4p/nokia_fw-bcm.c b/drivers/staging/nokia_h4p/nokia_fw-bcm.c
deleted file mode 100644
index b55f5ba1134e..000000000000
--- a/drivers/staging/nokia_h4p/nokia_fw-bcm.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * This file is part of Nokia H4P bluetooth driver
- *
- * Copyright (C) 2005-2008 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/serial_reg.h>
-
-#include "hci_h4p.h"
-
-static int hci_h4p_bcm_set_bdaddr(struct hci_h4p_info *info,
-				struct sk_buff *skb)
-{
-	int i;
-	static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
-	int not_valid;
-
-	not_valid = 1;
-	for (i = 0; i < 6; i++) {
-		if (info->bd_addr[i] != 0x00) {
-			not_valid = 0;
-			break;
-		}
-	}
-
-	if (not_valid) {
-		dev_info(info->dev, "Valid bluetooth address not found, setting some random\n");
-		/* When address is not valid, use some random but Nokia MAC */
-		memcpy(info->bd_addr, nokia_oui, 3);
-		get_random_bytes(info->bd_addr + 3, 3);
-	}
-
-	for (i = 0; i < 6; i++)
-		skb->data[9 - i] = info->bd_addr[i];
-
-	return 0;
-}
-
-void hci_h4p_bcm_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb)
-{
-	struct sk_buff *fw_skb;
-	int err;
-	unsigned long flags;
-
-	if (skb->data[5] != 0x00) {
-		dev_err(info->dev, "Firmware sending command failed 0x%.2x\n",
-			skb->data[5]);
-		info->fw_error = -EPROTO;
-	}
-
-	kfree_skb(skb);
-
-	fw_skb = skb_dequeue(info->fw_q);
-	if (fw_skb == NULL || info->fw_error) {
-		complete(&info->fw_completion);
-		return;
-	}
-
-	if (fw_skb->data[1] == 0x01 && fw_skb->data[2] == 0xfc &&
-			fw_skb->len >= 10) {
-		BT_DBG("Setting bluetooth address");
-		err = hci_h4p_bcm_set_bdaddr(info, fw_skb);
-		if (err < 0) {
-			kfree_skb(fw_skb);
-			info->fw_error = err;
-			complete(&info->fw_completion);
-			return;
-		}
-	}
-
-	skb_queue_tail(&info->txq, fw_skb);
-	spin_lock_irqsave(&info->lock, flags);
-	hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) |
-			UART_IER_THRI);
-	spin_unlock_irqrestore(&info->lock, flags);
-}
-
-
-int hci_h4p_bcm_send_fw(struct hci_h4p_info *info,
-			struct sk_buff_head *fw_queue)
-{
-	struct sk_buff *skb;
-	unsigned long flags, time;
-
-	info->fw_error = 0;
-
-	BT_DBG("Sending firmware");
-
-	time = jiffies;
-
-	info->fw_q = fw_queue;
-	skb = skb_dequeue(fw_queue);
-	if (!skb)
-		return -ENODATA;
-
-	BT_DBG("Sending commands");
-
-	/*
-	 * Disable smart-idle as UART TX interrupts
-	 * are not wake-up capable
-	 */
-	hci_h4p_smart_idle(info, 0);
-
-	/* Check if this is bd_address packet */
-	init_completion(&info->fw_completion);
-	skb_queue_tail(&info->txq, skb);
-	spin_lock_irqsave(&info->lock, flags);
-	hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) |
-			UART_IER_THRI);
-	spin_unlock_irqrestore(&info->lock, flags);
-
-	if (!wait_for_completion_timeout(&info->fw_completion,
-				msecs_to_jiffies(2000))) {
-		dev_err(info->dev, "No reply to fw command\n");
-		return -ETIMEDOUT;
-	}
-
-	if (info->fw_error) {
-		dev_err(info->dev, "FW error\n");
-		return -EPROTO;
-	}
-
-	BT_DBG("Firmware sent in %d msecs",
-		   jiffies_to_msecs(jiffies-time));
-
-	hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_RTS);
-	hci_h4p_set_rts(info, 0);
-	hci_h4p_change_speed(info, BC4_MAX_BAUD_RATE);
-	hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_RTS);
-
-	return 0;
-}