1 files changed, 0 insertions, 110 deletions
diff --git a/drivers/staging/nokia_h4p/nokia_fw-ti1273.c b/drivers/staging/nokia_h4p/nokia_fw-ti1273.c
deleted file mode 100644
index f5500f71c839..000000000000
--- a/drivers/staging/nokia_h4p/nokia_fw-ti1273.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * This file is part of Nokia H4P bluetooth driver
- *
- * Copyright (C) 2009 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/serial_reg.h>
-
-#include "hci_h4p.h"
-
-static struct sk_buff_head *fw_q;
-
-void hci_h4p_ti1273_parse_fw_event(struct hci_h4p_info *info,
-			struct sk_buff *skb)
-{
-	struct sk_buff *fw_skb;
-	unsigned long flags;
-
-	if (skb->data[5] != 0x00) {
-		dev_err(info->dev, "Firmware sending command failed 0x%.2x\n",
-			skb->data[5]);
-		info->fw_error = -EPROTO;
-	}
-
-	kfree_skb(skb);
-
-	fw_skb = skb_dequeue(fw_q);
-	if (fw_skb == NULL || info->fw_error) {
-		complete(&info->fw_completion);
-		return;
-	}
-
-	skb_queue_tail(&info->txq, fw_skb);
-	spin_lock_irqsave(&info->lock, flags);
-	hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) |
-			UART_IER_THRI);
-	spin_unlock_irqrestore(&info->lock, flags);
-}
-
-
-int hci_h4p_ti1273_send_fw(struct hci_h4p_info *info,
-			struct sk_buff_head *fw_queue)
-{
-	struct sk_buff *skb;
-	unsigned long flags, time;
-
-	info->fw_error = 0;
-
-	BT_DBG("Sending firmware");
-
-	time = jiffies;
-
-	fw_q = fw_queue;
-	skb = skb_dequeue(fw_queue);
-	if (!skb)
-		return -ENODATA;
-
-	BT_DBG("Sending commands");
-	/* Check if this is bd_address packet */
-	init_completion(&info->fw_completion);
-	hci_h4p_smart_idle(info, 0);
-	skb_queue_tail(&info->txq, skb);
-	spin_lock_irqsave(&info->lock, flags);
-	hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) |
-			UART_IER_THRI);
-	spin_unlock_irqrestore(&info->lock, flags);
-
-	if (!wait_for_completion_timeout(&info->fw_completion,
-				msecs_to_jiffies(2000))) {
-		dev_err(info->dev, "No reply to fw command\n");
-		return -ETIMEDOUT;
-	}
-
-	if (info->fw_error) {
-		dev_err(info->dev, "FW error\n");
-		return -EPROTO;
-	}
-
-	BT_DBG("Firmware sent in %d msecs",
-		   jiffies_to_msecs(jiffies-time));
-
-	hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_RTS);
-	hci_h4p_set_rts(info, 0);
-	hci_h4p_change_speed(info, BC4_MAX_BAUD_RATE);
-	if (hci_h4p_wait_for_cts(info, 1, 100)) {
-		dev_err(info->dev,
-			"cts didn't go down after final speed change\n");
-		return -ETIMEDOUT;
-	}
-	hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_RTS);
-
-	return 0;
-}