diff options
Diffstat (limited to 'drivers/staging/r8188eu/include/rtl8188e_hal.h')
-rw-r--r-- | drivers/staging/r8188eu/include/rtl8188e_hal.h | 212 |
1 files changed, 21 insertions, 191 deletions
diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h index d7db1dfc39d0..ed4091e7cc7e 100644 --- a/drivers/staging/r8188eu/include/rtl8188e_hal.h +++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h @@ -13,82 +13,28 @@ #include "rtl8188e_recv.h" #include "rtl8188e_xmit.h" #include "rtl8188e_cmd.h" -#include "Hal8188EPwrSeq.h" -#include "rtl8188e_sreset.h" #include "rtw_efuse.h" - -#include "odm_precomp.h" - -/* RTL8188E Power Configuration CMDs for USB/SDIO interfaces */ -#define Rtl8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow -#define Rtl8188E_NIC_DISABLE_FLOW rtl8188E_card_disable_flow -#define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188E_enter_lps_flow +#include "odm_types.h" +#include "odm.h" +#include "odm_HWConfig.h" +#include "odm_RegDefine11N.h" +#include "HalPhyRf_8188e.h" +#include "Hal8188ERateAdaptive.h" +#include "HalHWImg8188E_MAC.h" +#include "HalHWImg8188E_RF.h" +#include "HalHWImg8188E_BB.h" +#include "odm_RTL8188E.h" #define DRVINFO_SZ 4 /* unit is 8bytes */ #define PageNum_128(_Len) (u32)(((_Len)>>7) + ((_Len) & 0x7F ? 1 : 0)) -/* download firmware related data structure */ -#define FW_8188E_SIZE 0x4000 /* 16384,16k */ -#define FW_8188E_START_ADDRESS 0x1000 - -#define MAX_PAGE_SIZE 4096 /* @ page : 4k bytes */ - -#define IS_FW_HEADER_EXIST(_pFwHdr) \ - ((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 || \ - (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 || \ - (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x2300 || \ - (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88E0) - -/* This structure must be careful with byte-ordering */ - -struct rt_firmware_hdr { - /* 8-byte alinment required */ - /* LONG WORD 0 ---- */ - __le16 Signature; /* 92C0: test chip; 92C, - * 88C0: test chip; 88C1: MP A-cut; - * 92C1: MP A-cut */ - u8 Category; /* AP/NIC and USB/PCI */ - u8 Function; /* Reserved for different FW function - * indcation, for further use when - * driver needs to download different - * FW for different conditions */ - __le16 Version; /* FW Version */ - u8 Subversion; /* FW Subversion, default 0x00 */ - u16 Rsvd1; - - /* LONG WORD 1 ---- */ - u8 Month; /* Release time Month field */ - u8 Date; /* Release time Date field */ - u8 Hour; /* Release time Hour field */ - u8 Minute; /* Release time Minute field */ - __le16 RamCodeSize; /* The size of RAM code */ - u8 Foundry; - u8 Rsvd2; - - /* LONG WORD 2 ---- */ - __le32 SvnIdx; /* The SVN entry index */ - u32 Rsvd3; - - /* LONG WORD 3 ---- */ - u32 Rsvd4; - u32 Rsvd5; -}; - #define DRIVER_EARLY_INT_TIME 0x05 #define BCN_DMA_ATIME_INT_TIME 0x02 -enum usb_rx_agg_mode { - USB_RX_AGG_DISABLE, - USB_RX_AGG_DMA, - USB_RX_AGG_USB, - USB_RX_AGG_MIX -}; - #define MAX_RX_DMA_BUFFER_SIZE_88E \ 0x2400 /* 9k for 88E nornal chip , MaxRxBuff=10k-max(TxReportSize(64*8), * WOLPattern(16*24)) */ -#define TX_SELE_HQ BIT(0) /* High Queue */ #define TX_SELE_LQ BIT(1) /* Low Queue */ #define TX_SELE_NQ BIT(2) /* Normal Queue */ @@ -103,12 +49,6 @@ enum usb_rx_agg_mode { #define TX_PAGE_BOUNDARY_88E (TX_TOTAL_PAGE_NUMBER_88E + 1) -/* Note: For Normal Chip Setting ,modify later */ -#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER \ - TX_TOTAL_PAGE_NUMBER_88E /* 0xA9 , 0xb0=>176=>22k */ -#define WMM_NORMAL_TX_PAGE_BOUNDARY_88E \ - (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER + 1) /* 0xA9 */ - #include "HalVerDef.h" #include "hal_com.h" @@ -153,57 +93,25 @@ struct txpowerinfo24g { #define EFUSE_PROTECT_BYTES_BANK 16 +#define USB_RXAGG_PAGE_COUNT 48 +#define USB_RXAGG_PAGE_TIMEOUT 0x4 + struct hal_data_8188e { struct HAL_VERSION VersionID; - u16 FirmwareVersion; - u16 FirmwareVersionRev; - u16 FirmwareSubVersion; - u16 FirmwareSignature; - u8 PGMaxGroup; /* current WIFI_PHY values */ - u32 ReceiveConfig; enum ht_channel_width CurrentChannelBW; u8 CurrentChannel; u8 nCur40MhzPrimeSC;/* Control channel sub-carrier */ - u16 BasicRateSet; - - /* rf_ctrl */ - u8 rf_chip; - u8 rf_type; - - u8 BoardType; - - /* EEPROM setting. */ - u16 EEPROMVID; - u16 EEPROMPID; - u16 EEPROMSVID; - u16 EEPROMSDID; - u8 EEPROMCustomerID; - u8 EEPROMSubCustomerID; - u8 EEPROMVersion; u8 EEPROMRegulatory; - - u8 bTXPowerDataReadFromEEPORM; u8 EEPROMThermalMeter; - u8 bAPKThermalMeterIgnore; - bool EepromOrEfuse; - struct efuse_hal EfuseHal; - - u8 Index24G_CCK_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; - u8 Index24G_BW40_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; + u8 Index24G_CCK_Base[CHANNEL_MAX_NUMBER]; + u8 Index24G_BW40_Base[CHANNEL_MAX_NUMBER]; /* If only one tx, only BW20 and OFDM are used. */ - s8 CCK_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT]; - s8 OFDM_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT]; - s8 BW20_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT]; - s8 BW40_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT]; - - u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; - /* For HT 40MHZ pwr */ - u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; - /* For HT 40MHZ pwr */ - u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; + s8 OFDM_24G_Diff[MAX_TX_COUNT]; + s8 BW20_24G_Diff[MAX_TX_COUNT]; + /* HT 20<->40 Pwr diff */ u8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; /* For HT<->legacy pwr diff */ @@ -212,39 +120,17 @@ struct hal_data_8188e { u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; - u8 LegacyHTTxPowerDiff;/* Legacy to HT rate power diff */ - /* The current Tx Power Level */ - u8 CurrentCckTxPwrIdx; - u8 CurrentOfdm24GTxPwrIdx; - u8 CurrentBW2024GTxPwrIdx; - u8 CurrentBW4024GTxPwrIdx; - /* Read/write are allow for following hardware information variables */ - u8 framesync; - u32 framesyncC34; - u8 framesyncMonitor; - u8 DefaultInitialGain[4]; u8 pwrGroupCnt; u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16]; - u32 CCKTxPowerLevelOriginalOffset; u8 CrystalCap; - u32 AntennaTxPath; /* Antenna path Tx */ - u32 AntennaRxPath; /* Antenna path Rx */ - u8 ExternalPA; - - u8 bLedOpenDrain; /* Open-drain support for controlling the LED.*/ - - u8 b1x1RecvCombine; /* for 1T1R receive combining */ u32 AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */ - struct bb_reg_def PHYRegDef[4]; /* Radio A/B/C/D */ + struct bb_reg_def PHYRegDef; - u32 RfRegChnlVal[2]; - - /* RDG enable */ - bool bRDGEnable; + u32 RfRegChnlVal; /* for host message to fw */ u8 LastHMEBoxNum; @@ -261,85 +147,30 @@ struct hal_data_8188e { u8 AntDivCfg; u8 TRxAntDivType; - u8 bDumpRxPkt;/* for debug */ - u8 bDumpTxPkt;/* for debug */ - u8 FwRsvdPageStartOffset; /* Reserve page start offset except - * beacon in TxQ. */ - - /* 2010/08/09 MH Add CU power down mode. */ - bool pwrdown; - - /* Add for dual MAC 0--Mac0 1--Mac1 */ - u32 interfaceIndex; - - u8 OutEpQueueSel; - u8 OutEpNumber; - - /* Add for USB aggreation mode dynamic shceme. */ - bool UsbRxHighSpeedMode; - - /* 2010/11/22 MH Add for slim combo debug mode selective. */ - /* This is used for fix the drawback of CU TSMC-A/UMC-A cut. - * HW auto suspend ability. Close BT clock. */ - bool SlimComboDbg; - - u16 EfuseUsedBytes; + u8 out_ep_extra_queues; struct P2P_PS_Offload_t p2p_ps_offload; /* Auto FSM to Turn On, include clock, isolation, power control * for MAC only */ u8 bMacPwrCtrlOn; - - u32 UsbBulkOutSize; - - /* Interrupt relatd register information. */ - u32 IntArray[3];/* HISR0,HISR1,HSISR */ - u8 C2hArray[16]; - u8 UsbTxAggMode; - u8 UsbTxAggDescNum; - u32 MaxUsbRxAggBlock; - - enum usb_rx_agg_mode UsbRxAggMode; - u8 UsbRxAggBlockCount; /* USB Block count. Block size is - * 512-byte in high speed and 64-byte - * in full speed */ - u8 UsbRxAggBlockTimeout; - u8 UsbRxAggPageCount; /* 8192C DMA page count */ - u8 UsbRxAggPageTimeout; }; -#define GET_HAL_DATA(__pAdapter) \ - ((struct hal_data_8188e *)((__pAdapter)->HalData)) - -/* rtl8188e_hal_init.c */ -s32 rtl8188e_FirmwareDownload(struct adapter *padapter); -void _8051Reset88E(struct adapter *padapter); -void rtl8188e_InitializeFirmwareVars(struct adapter *padapter); - s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy); /* EFuse */ -u8 GetEEPROMSize8188E(struct adapter *padapter); -void Hal_InitPGData88E(struct adapter *padapter); void Hal_EfuseParseIDCode88E(struct adapter *padapter, u8 *hwinfo); void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail); -void Hal_EfuseParseEEPROMVer88E(struct adapter *padapter, u8 *hwinfo, - bool AutoLoadFail); void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail); -void Hal_EfuseParseCustomerID88E(struct adapter *padapter, u8 *hwinfo, - bool AutoLoadFail); void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter,u8 *PROMContent, bool AutoLoadFail); void Hal_ReadThermalMeter_88E(struct adapter * dapter, u8 *PROMContent, bool AutoloadFail); void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail); -void Hal_EfuseParseBoardType88E(struct adapter *pAdapter, u8 *hwinfo, - bool AutoLoadFail); void Hal_ReadPowerSavingMode88E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail); @@ -347,6 +178,5 @@ void rtl8188e_read_chip_version(struct adapter *padapter); s32 rtl8188e_iol_efuse_patch(struct adapter *padapter); void rtw_cancel_all_timer(struct adapter *padapter); -void _ps_open_RF(struct adapter *adapt); #endif /* __RTL8188E_HAL_H__ */ |