diff options
Diffstat (limited to 'drivers/staging/rdma/ipath/ipath_diag.c')
| -rw-r--r-- | drivers/staging/rdma/ipath/ipath_diag.c | 551 |
1 files changed, 0 insertions, 551 deletions
diff --git a/drivers/staging/rdma/ipath/ipath_diag.c b/drivers/staging/rdma/ipath/ipath_diag.c deleted file mode 100644 index 45802e97332e..000000000000 --- a/drivers/staging/rdma/ipath/ipath_diag.c +++ /dev/null @@ -1,551 +0,0 @@ -/* - * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved. - * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * This file contains support for diagnostic functions. It is accessed by - * opening the ipath_diag device, normally minor number 129. Diagnostic use - * of the InfiniPath chip may render the chip or board unusable until the - * driver is unloaded, or in some cases, until the system is rebooted. - * - * Accesses to the chip through this interface are not similar to going - * through the /sys/bus/pci resource mmap interface. - */ - -#include <linux/io.h> -#include <linux/pci.h> -#include <linux/vmalloc.h> -#include <linux/fs.h> -#include <linux/export.h> -#include <asm/uaccess.h> - -#include "ipath_kernel.h" -#include "ipath_common.h" - -int ipath_diag_inuse; -static int diag_set_link; - -static int ipath_diag_open(struct inode *in, struct file *fp); -static int ipath_diag_release(struct inode *in, struct file *fp); -static ssize_t ipath_diag_read(struct file *fp, char __user *data, - size_t count, loff_t *off); -static ssize_t ipath_diag_write(struct file *fp, const char __user *data, - size_t count, loff_t *off); - -static const struct file_operations diag_file_ops = { - .owner = THIS_MODULE, - .write = ipath_diag_write, - .read = ipath_diag_read, - .open = ipath_diag_open, - .release = ipath_diag_release, - .llseek = default_llseek, -}; - -static ssize_t ipath_diagpkt_write(struct file *fp, - const char __user *data, - size_t count, loff_t *off); - -static const struct file_operations diagpkt_file_ops = { - .owner = THIS_MODULE, - .write = ipath_diagpkt_write, - .llseek = noop_llseek, -}; - -static atomic_t diagpkt_count = ATOMIC_INIT(0); -static struct cdev *diagpkt_cdev; -static struct device *diagpkt_dev; - -int ipath_diag_add(struct ipath_devdata *dd) -{ - char name[16]; - int ret = 0; - - if (atomic_inc_return(&diagpkt_count) == 1) { - ret = ipath_cdev_init(IPATH_DIAGPKT_MINOR, - "ipath_diagpkt", &diagpkt_file_ops, - &diagpkt_cdev, &diagpkt_dev); - - if (ret) { - ipath_dev_err(dd, "Couldn't create ipath_diagpkt " - "device: %d", ret); - goto done; - } - } - - snprintf(name, sizeof(name), "ipath_diag%d", dd->ipath_unit); - - ret = ipath_cdev_init(IPATH_DIAG_MINOR_BASE + dd->ipath_unit, name, - &diag_file_ops, &dd->diag_cdev, - &dd->diag_dev); - if (ret) - ipath_dev_err(dd, "Couldn't create %s device: %d", - name, ret); - -done: - return ret; -} - -void ipath_diag_remove(struct ipath_devdata *dd) -{ - if (atomic_dec_and_test(&diagpkt_count)) - ipath_cdev_cleanup(&diagpkt_cdev, &diagpkt_dev); - - ipath_cdev_cleanup(&dd->diag_cdev, &dd->diag_dev); -} - -/** - * ipath_read_umem64 - read a 64-bit quantity from the chip into user space - * @dd: the infinipath device - * @uaddr: the location to store the data in user memory - * @caddr: the source chip address (full pointer, not offset) - * @count: number of bytes to copy (multiple of 32 bits) - * - * This function also localizes all chip memory accesses. - * The copy should be written such that we read full cacheline packets - * from the chip. This is usually used for a single qword - * - * NOTE: This assumes the chip address is 64-bit aligned. - */ -static int ipath_read_umem64(struct ipath_devdata *dd, void __user *uaddr, - const void __iomem *caddr, size_t count) -{ - const u64 __iomem *reg_addr = caddr; - const u64 __iomem *reg_end = reg_addr + (count / sizeof(u64)); - int ret; - - /* not very efficient, but it works for now */ - if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) { - ret = -EINVAL; - goto bail; - } - while (reg_addr < reg_end) { - u64 data = readq(reg_addr); - if (copy_to_user(uaddr, &data, sizeof(u64))) { - ret = -EFAULT; - goto bail; - } - reg_addr++; - uaddr += sizeof(u64); - } - ret = 0; -bail: - return ret; -} - -/** - * ipath_write_umem64 - write a 64-bit quantity to the chip from user space - * @dd: the infinipath device - * @caddr: the destination chip address (full pointer, not offset) - * @uaddr: the source of the data in user memory - * @count: the number of bytes to copy (multiple of 32 bits) - * - * This is usually used for a single qword - * NOTE: This assumes the chip address is 64-bit aligned. - */ - -static int ipath_write_umem64(struct ipath_devdata *dd, void __iomem *caddr, - const void __user *uaddr, size_t count) -{ - u64 __iomem *reg_addr = caddr; - const u64 __iomem *reg_end = reg_addr + (count / sizeof(u64)); - int ret; - - /* not very efficient, but it works for now */ - if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) { - ret = -EINVAL; - goto bail; - } - while (reg_addr < reg_end) { - u64 data; - if (copy_from_user(&data, uaddr, sizeof(data))) { - ret = -EFAULT; - goto bail; - } - writeq(data, reg_addr); - - reg_addr++; - uaddr += sizeof(u64); - } - ret = 0; -bail: - return ret; -} - -/** - * ipath_read_umem32 - read a 32-bit quantity from the chip into user space - * @dd: the infinipath device - * @uaddr: the location to store the data in user memory - * @caddr: the source chip address (full pointer, not offset) - * @count: number of bytes to copy - * - * read 32 bit values, not 64 bit; for memories that only - * support 32 bit reads; usually a single dword. - */ -static int ipath_read_umem32(struct ipath_devdata *dd, void __user *uaddr, - const void __iomem *caddr, size_t count) -{ - const u32 __iomem *reg_addr = caddr; - const u32 __iomem *reg_end = reg_addr + (count / sizeof(u32)); - int ret; - - if (reg_addr < (u32 __iomem *) dd->ipath_kregbase || - reg_end > (u32 __iomem *) dd->ipath_kregend) { - ret = -EINVAL; - goto bail; - } - /* not very efficient, but it works for now */ - while (reg_addr < reg_end) { - u32 data = readl(reg_addr); - if (copy_to_user(uaddr, &data, sizeof(data))) { - ret = -EFAULT; - goto bail; - } - - reg_addr++; - uaddr += sizeof(u32); - - } - ret = 0; -bail: - return ret; -} - -/** - * ipath_write_umem32 - write a 32-bit quantity to the chip from user space - * @dd: the infinipath device - * @caddr: the destination chip address (full pointer, not offset) - * @uaddr: the source of the data in user memory - * @count: number of bytes to copy - * - * write 32 bit values, not 64 bit; for memories that only - * support 32 bit write; usually a single dword. - */ - -static int ipath_write_umem32(struct ipath_devdata *dd, void __iomem *caddr, - const void __user *uaddr, size_t count) -{ - u32 __iomem *reg_addr = caddr; - const u32 __iomem *reg_end = reg_addr + (count / sizeof(u32)); - int ret; - - if (reg_addr < (u32 __iomem *) dd->ipath_kregbase || - reg_end > (u32 __iomem *) dd->ipath_kregend) { - ret = -EINVAL; - goto bail; - } - while (reg_addr < reg_end) { - u32 data; - if (copy_from_user(&data, uaddr, sizeof(data))) { - ret = -EFAULT; - goto bail; - } - writel(data, reg_addr); - - reg_addr++; - uaddr += sizeof(u32); - } - ret = 0; -bail: - return ret; -} - -static int ipath_diag_open(struct inode *in, struct file *fp) -{ - int unit = iminor(in) - IPATH_DIAG_MINOR_BASE; - struct ipath_devdata *dd; - int ret; - - mutex_lock(&ipath_mutex); - - if (ipath_diag_inuse) { - ret = -EBUSY; - goto bail; - } - - dd = ipath_lookup(unit); - - if (dd == NULL || !(dd->ipath_flags & IPATH_PRESENT) || - !dd->ipath_kregbase) { - ret = -ENODEV; - goto bail; - } - - fp->private_data = dd; - ipath_diag_inuse = -2; - diag_set_link = 0; - ret = 0; - - /* Only expose a way to reset the device if we - make it into diag mode. */ - ipath_expose_reset(&dd->pcidev->dev); - -bail: - mutex_unlock(&ipath_mutex); - - return ret; -} - -/** - * ipath_diagpkt_write - write an IB packet - * @fp: the diag data device file pointer - * @data: ipath_diag_pkt structure saying where to get the packet - * @count: size of data to write - * @off: unused by this code - */ -static ssize_t ipath_diagpkt_write(struct file *fp, - const char __user *data, - size_t count, loff_t *off) -{ - u32 __iomem *piobuf; - u32 plen, pbufn, maxlen_reserve; - struct ipath_diag_pkt odp; - struct ipath_diag_xpkt dp; - u32 *tmpbuf = NULL; - struct ipath_devdata *dd; - ssize_t ret = 0; - u64 val; - u32 l_state, lt_state; /* LinkState, LinkTrainingState */ - - - if (count == sizeof(dp)) { - if (copy_from_user(&dp, data, sizeof(dp))) { - ret = -EFAULT; - goto bail; - } - } else if (count == sizeof(odp)) { - if (copy_from_user(&odp, data, sizeof(odp))) { - ret = -EFAULT; - goto bail; - } - dp.len = odp.len; - dp.unit = odp.unit; - dp.data = odp.data; - dp.pbc_wd = 0; - } else { - ret = -EINVAL; - goto bail; - } - - /* send count must be an exact number of dwords */ - if (dp.len & 3) { - ret = -EINVAL; - goto bail; - } - - plen = dp.len >> 2; - - dd = ipath_lookup(dp.unit); - if (!dd || !(dd->ipath_flags & IPATH_PRESENT) || - !dd->ipath_kregbase) { - ipath_cdbg(VERBOSE, "illegal unit %u for diag data send\n", - dp.unit); - ret = -ENODEV; - goto bail; - } - - if (ipath_diag_inuse && !diag_set_link && - !(dd->ipath_flags & IPATH_LINKACTIVE)) { - diag_set_link = 1; - ipath_cdbg(VERBOSE, "Trying to set to set link active for " - "diag pkt\n"); - ipath_set_linkstate(dd, IPATH_IB_LINKARM); - ipath_set_linkstate(dd, IPATH_IB_LINKACTIVE); - } - - if (!(dd->ipath_flags & IPATH_INITTED)) { - /* no hardware, freeze, etc. */ - ipath_cdbg(VERBOSE, "unit %u not usable\n", dd->ipath_unit); - ret = -ENODEV; - goto bail; - } - /* - * Want to skip check for l_state if using custom PBC, - * because we might be trying to force an SM packet out. - * first-cut, skip _all_ state checking in that case. - */ - val = ipath_ib_state(dd, dd->ipath_lastibcstat); - lt_state = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat); - l_state = ipath_ib_linkstate(dd, dd->ipath_lastibcstat); - if (!dp.pbc_wd && (lt_state != INFINIPATH_IBCS_LT_STATE_LINKUP || - (val != dd->ib_init && val != dd->ib_arm && - val != dd->ib_active))) { - ipath_cdbg(VERBOSE, "unit %u not ready (state %llx)\n", - dd->ipath_unit, (unsigned long long) val); - ret = -EINVAL; - goto bail; - } - - /* - * need total length before first word written, plus 2 Dwords. One Dword - * is for padding so we get the full user data when not aligned on - * a word boundary. The other Dword is to make sure we have room for the - * ICRC which gets tacked on later. - */ - maxlen_reserve = 2 * sizeof(u32); - if (dp.len > dd->ipath_ibmaxlen - maxlen_reserve) { - ipath_dbg("Pkt len 0x%x > ibmaxlen %x\n", - dp.len, dd->ipath_ibmaxlen); - ret = -EINVAL; - goto bail; - } - - plen = sizeof(u32) + dp.len; - - tmpbuf = vmalloc(plen); - if (!tmpbuf) { - dev_info(&dd->pcidev->dev, "Unable to allocate tmp buffer, " - "failing\n"); - ret = -ENOMEM; - goto bail; - } - - if (copy_from_user(tmpbuf, - (const void __user *) (unsigned long) dp.data, - dp.len)) { - ret = -EFAULT; - goto bail; - } - - plen >>= 2; /* in dwords */ - - piobuf = ipath_getpiobuf(dd, plen, &pbufn); - if (!piobuf) { - ipath_cdbg(VERBOSE, "No PIO buffers avail unit for %u\n", - dd->ipath_unit); - ret = -EBUSY; - goto bail; - } - /* disarm it just to be extra sure */ - ipath_disarm_piobufs(dd, pbufn, 1); - - if (ipath_debug & __IPATH_PKTDBG) - ipath_cdbg(VERBOSE, "unit %u 0x%x+1w pio%d\n", - dd->ipath_unit, plen - 1, pbufn); - - if (dp.pbc_wd == 0) - dp.pbc_wd = plen; - writeq(dp.pbc_wd, piobuf); - /* - * Copy all by the trigger word, then flush, so it's written - * to chip before trigger word, then write trigger word, then - * flush again, so packet is sent. - */ - if (dd->ipath_flags & IPATH_PIO_FLUSH_WC) { - ipath_flush_wc(); - __iowrite32_copy(piobuf + 2, tmpbuf, plen - 1); - ipath_flush_wc(); - __raw_writel(tmpbuf[plen - 1], piobuf + plen + 1); - } else - __iowrite32_copy(piobuf + 2, tmpbuf, plen); - - ipath_flush_wc(); - - ret = sizeof(dp); - -bail: - vfree(tmpbuf); - return ret; -} - -static int ipath_diag_release(struct inode *in, struct file *fp) -{ - mutex_lock(&ipath_mutex); - ipath_diag_inuse = 0; - fp->private_data = NULL; - mutex_unlock(&ipath_mutex); - return 0; -} - -static ssize_t ipath_diag_read(struct file *fp, char __user *data, - size_t count, loff_t *off) -{ - struct ipath_devdata *dd = fp->private_data; - void __iomem *kreg_base; - ssize_t ret; - - kreg_base = dd->ipath_kregbase; - - if (count == 0) - ret = 0; - else if ((count % 4) || (*off % 4)) - /* address or length is not 32-bit aligned, hence invalid */ - ret = -EINVAL; - else if (ipath_diag_inuse < 1 && (*off || count != 8)) - ret = -EINVAL; /* prevent cat /dev/ipath_diag* */ - else if ((count % 8) || (*off % 8)) - /* address or length not 64-bit aligned; do 32-bit reads */ - ret = ipath_read_umem32(dd, data, kreg_base + *off, count); - else - ret = ipath_read_umem64(dd, data, kreg_base + *off, count); - - if (ret >= 0) { - *off += count; - ret = count; - if (ipath_diag_inuse == -2) - ipath_diag_inuse++; - } - - return ret; -} - -static ssize_t ipath_diag_write(struct file *fp, const char __user *data, - size_t count, loff_t *off) -{ - struct ipath_devdata *dd = fp->private_data; - void __iomem *kreg_base; - ssize_t ret; - - kreg_base = dd->ipath_kregbase; - - if (count == 0) - ret = 0; - else if ((count % 4) || (*off % 4)) - /* address or length is not 32-bit aligned, hence invalid */ - ret = -EINVAL; - else if ((ipath_diag_inuse == -1 && (*off || count != 8)) || - ipath_diag_inuse == -2) /* read qw off 0, write qw off 0 */ - ret = -EINVAL; /* before any other write allowed */ - else if ((count % 8) || (*off % 8)) - /* address or length not 64-bit aligned; do 32-bit writes */ - ret = ipath_write_umem32(dd, kreg_base + *off, data, count); - else - ret = ipath_write_umem64(dd, kreg_base + *off, data, count); - - if (ret >= 0) { - *off += count; - ret = count; - if (ipath_diag_inuse == -1) - ipath_diag_inuse = 1; /* all read/write OK now */ - } - - return ret; -} |