diff options
Diffstat (limited to 'drivers/staging/rt2860/mlme.h')
| -rw-r--r-- | drivers/staging/rt2860/mlme.h | 41 |
1 files changed, 21 insertions, 20 deletions
diff --git a/drivers/staging/rt2860/mlme.h b/drivers/staging/rt2860/mlme.h index 01414c3b4889..cd1ee3d7a91d 100644 --- a/drivers/staging/rt2860/mlme.h +++ b/drivers/staging/rt2860/mlme.h @@ -32,8 +32,9 @@ Revision History: Who When What -------- ---------- ------------------------------ - John Chang 2003-08-28 Created - John Chang 2004-09-06 modified for RT2600 + John Chang 2003-08-28 Created + John Chang 2004-09-06 modified for RT2600 + Justin P. Mattock 11/07/2010 Fix typos in comments */ #ifndef __MLME_H__ @@ -41,7 +42,7 @@ #include "rtmp_dot11.h" -/* maximum supported capability information - */ +/* maximum supported capability information */ /* ESS, IBSS, Privacy, Short Preamble, Spectrum mgmt, Short Slot */ #define SUPPORTED_CAPABILITY_INFO 0x0533 @@ -77,7 +78,7 @@ #define CW_MAX_IN_BITS 10 /* actual CwMax = 2^CW_MAX_IN_BITS - 1 */ /* Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720). */ -/* SHould not refer to this constant anymore */ +/* Should not refer to this constant anymore */ /*#define RSSI_TO_DBM_OFFSET 120 // for RT2530 RSSI-115 = dBm */ #define RSSI_FOR_MID_TX_POWER -55 /* -55 db is considered mid-distance */ #define RSSI_FOR_LOW_TX_POWER -45 /* -45 db is considered very short distance and */ @@ -123,7 +124,7 @@ #define TID_MAC_HASH_INDEX(Addr, TID) (TID_MAC_HASH(Addr, TID) % HASH_TABLE_SIZE) /* LED Control */ -/* assoiation ON. one LED ON. another blinking when TX, OFF when idle */ +/* association ON. one LED ON. another blinking when TX, OFF when idle */ /* no association, both LED off */ #define ASIC_LED_ACT_ON(pAd) RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00031e46) #define ASIC_LED_ACT_OFF(pAd) RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00001e46) @@ -284,8 +285,8 @@ struct PACKED rt_ht_capability_ie { /* 802.11n draft3 related structure definitions. */ /* 7.3.2.60 */ -#define dot11OBSSScanPassiveDwell 20 /* in TU. min amount of time that the STA continously scans each channel when performing an active OBSS scan. */ -#define dot11OBSSScanActiveDwell 10 /* in TU.min amount of time that the STA continously scans each channel when performing an passive OBSS scan. */ +#define dot11OBSSScanPassiveDwell 20 /* in TU. min amount of time that the STA continuously scans each channel when performing an active OBSS scan. */ +#define dot11OBSSScanActiveDwell 10 /* in TU.min amount of time that the STA continuously scans each channel when performing an passive OBSS scan. */ #define dot11BSSWidthTriggerScanInterval 300 /* in sec. max interval between scan operations to be performed to detect BSS channel width trigger events. */ #define dot11OBSSScanPassiveTotalPerChannel 200 /* in TU. min total amount of time that the STA scans each channel when performing a passive OBSS scan. */ #define dot11OBSSScanActiveTotalPerChannel 20 /*in TU. min total amount of time that the STA scans each channel when performing a active OBSS scan */ @@ -325,7 +326,7 @@ struct rt_trigger_eventa { }; /* 20/40 trigger event table */ -/* If one Event A delete or created, or if Event B is detected or not detected, STA should send 2040BSSCoexistence to AP. */ +/* If one Event (A) is deleted or created, or if Event (B) is detected or not detected, STA should send 2040BSSCoexistence to AP. */ #define MAX_TRIGGER_EVENT 64 struct rt_trigger_event_tab { u8 EventANo; @@ -357,14 +358,14 @@ struct PACKED rt_bss_2040_intolerant_ch_report { u8 ChList[0]; }; -/* The structure for channel switch annoucement IE. This is in 802.11n D3.03 */ +/* The structure for channel switch announcement IE. This is in 802.11n D3.03 */ struct PACKED rt_cha_switch_announce_ie { u8 SwitchMode; /*channel switch mode */ u8 NewChannel; /* */ u8 SwitchCount; /* */ }; -/* The structure for channel switch annoucement IE. This is in 802.11n D3.03 */ +/* The structure for channel switch announcement IE. This is in 802.11n D3.03 */ struct PACKED rt_sec_cha_offset_ie { u8 SecondaryChannelOffset; /* 1: Secondary above, 3: Secondary below, 0: no Secondary */ }; @@ -377,7 +378,7 @@ struct rt_ht_phy_info { u8 MCSSet[16]; }; -/*This structure substracts ralink supports from all 802.11n-related features. */ +/*This structure subtracts ralink supports from all 802.11n-related features. */ /*Features not listed here but contained in 802.11n spec are not supported in rt2860. */ struct rt_ht_capability { u16 ChannelWidth:1; @@ -387,14 +388,14 @@ struct rt_ht_capability { u16 ShortGIfor40:1; /*for40MHz */ u16 TxSTBC:1; u16 RxSTBC:2; /* 2 bits */ - u16 AmsduEnable:1; /* Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n */ + u16 AmsduEnable:1; /* Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benefit of 802.11n */ u16 AmsduSize:1; /* Max receiving A-MSDU size */ u16 rsv:5; /*Substract from Addiont HT INFO IE */ u8 MaxRAmpduFactor:2; u8 MpduDensity:3; - u8 ExtChanOffset:2; /* Please not the difference with following u8 NewExtChannelOffset; from 802.11n */ + u8 ExtChanOffset:2; /* Please note the difference with following u8 NewExtChannelOffset; from 802.11n */ u8 RecomWidth:1; u16 OperaionMode:2; @@ -481,7 +482,7 @@ struct PACKED rt_ba_parm { u16 AMSDUSupported:1; /* 0: not permitted 1: permitted */ u16 BAPolicy:1; /* 1: immediately BA 0:delayed BA */ u16 TID:4; /* value of TC os TS */ - u16 BufSize:10; /* number of buffe of size 2304 octetsr */ + u16 BufSize:10; /* number of buffer of size 2304 octetsr */ }; /* 2-byte BA Starting Seq CONTROL field */ @@ -551,7 +552,7 @@ struct PACKED rt_frame_mtba_req { BASEQ_CONTROL BAStartingSeq; }; -/* Compressed format is mandantory in HT STA */ +/* Compressed format is mandatory in HT STA */ struct PACKED rt_frame_mtba { struct rt_frame_control FC; u16 Duration; @@ -647,7 +648,7 @@ struct PACKED rt_frame_ba { u8 bitmask[8]; }; -/* Radio Measuement Request Frame Format */ +/* Radio Measurement Request Frame Format */ struct PACKED rt_frame_rm_req_action { struct rt_header_802_11 Hdr; u8 Category; @@ -709,7 +710,7 @@ struct rt_edca_parm { u8 Cwmin[4]; u8 Cwmax[4]; u16 Txop[4]; /* in unit of 32-us */ - BOOLEAN bACM[4]; /* 1: Admission Control of AC_BK is mandattory */ + BOOLEAN bACM[4]; /* 1: Admission Control of AC_BK is mandatory */ }; /* QBSS LOAD information from QAP's BEACON/ProbeRsp */ @@ -757,7 +758,7 @@ struct rt_wpa_ie { struct rt_bss_entry { u8 Bssid[MAC_ADDR_LEN]; u8 Channel; - u8 CentralChannel; /*Store the wide-band central channel for 40MHz. .used in 40MHz AP. Or this is the same as Channel. */ + u8 CentralChannel; /*Store the wide-band central channel for 40MHz. used in 40MHz AP. Or this is the same as Channel. */ u8 BssType; u16 AtimWin; u16 BeaconPeriod; @@ -855,7 +856,7 @@ struct rt_state_machine { STATE_MACHINE_FUNC *TransFunc; }; -/* MLME AUX data structure that hold temporarliy settings during a connection attempt. */ +/* MLME AUX data structure that holds temporarliy settings during a connection attempt. */ /* Once this attemp succeeds, all settings will be copy to pAd->StaActive. */ /* A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of */ /* several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely */ @@ -996,7 +997,7 @@ struct PACKED rt_rtmp_tx_rate_switch { #define MAC_TABLE_ASSOC_TIMEOUT 5 /* unit: sec */ #define MAC_TABLE_FULL(Tab) ((Tab).size == MAX_LEN_OF_MAC_TABLE) -/* AP shall drop the sta if contine Tx fail count reach it. */ +/* AP shall drop the sta if continue Tx fail count reach it. */ #define MAC_ENTRY_LIFE_CHECK_CNT 20 /* packet cnt. */ /* Value domain of pMacEntry->Sst */ |