diff options
Diffstat (limited to 'drivers/staging/rt2860/rtmp_def.h')
| -rw-r--r-- | drivers/staging/rt2860/rtmp_def.h | 1109 |
1 files changed, 536 insertions, 573 deletions
diff --git a/drivers/staging/rt2860/rtmp_def.h b/drivers/staging/rt2860/rtmp_def.h index f5fee57fbe3e..9c54bacb845b 100644 --- a/drivers/staging/rt2860/rtmp_def.h +++ b/drivers/staging/rt2860/rtmp_def.h @@ -41,9 +41,9 @@ #include "oid.h" -// -// Debug information verbosity: lower values indicate higher urgency -// +/* */ +/* Debug information verbosity: lower values indicate higher urgency */ +/* */ #define RT_DEBUG_OFF 0 #define RT_DEBUG_ERROR 1 #define RT_DEBUG_WARN 2 @@ -51,111 +51,101 @@ #define RT_DEBUG_INFO 4 #define RT_DEBUG_LOUD 5 -#define NIC_TAG ((ULONG)'0682') -#define NIC_DBG_STRING ("**RT28xx**") +#define NIC_TAG ((unsigned long)'0682') +#define NIC_DBG_char ("**RT28xx**") -#define RALINK_2883_VERSION ((UINT32)0x28830300) -#define RALINK_2880E_VERSION ((UINT32)0x28720200) -#define RALINK_3070_VERSION ((UINT32)0x30700200) +#ifdef RTMP_MAC_USB +#define TX_RING_SIZE 8 /* 1 */ +#define PRIO_RING_SIZE 8 +#define MGMT_RING_SIZE 32 /* PRIO_RING_SIZE */ +#define RX_RING_SIZE 8 +#define MAX_TX_PROCESS 4 +#define LOCAL_TXBUF_SIZE 2048 +#endif /* RTMP_MAC_USB // */ -// -// NDIS version in use by the NIC driver. -// The high byte is the major version. The low byte is the minor version. -// -#ifdef NDIS51_MINIPORT -#define NIC_DRIVER_VERSION 0x0501 -#else -#define NIC_DRIVER_VERSION 0x0500 -#endif +/*#define PACKED */ -// -// NDIS media type, current is ethernet, change if native wireless supported -// -#define NIC_MEDIA_TYPE NdisMedium802_3 -#define NIC_PCI_HDR_LENGTH 0xe2 -#define NIC_MAX_PACKET_SIZE 2304 -#define NIC_HEADER_SIZE 14 -#define MAX_MAP_REGISTERS_NEEDED 32 -#define MIN_MAP_REGISTERS_NEEDED 2 //Todo: should consider fragment issue. - -// -// interface type, we use PCI -// -#define NIC_INTERFACE_TYPE NdisInterfacePci -#define NIC_INTERRUPT_MODE NdisInterruptLevelSensitive - -// -// buffer size passed in NdisMQueryAdapterResources -// We should only need three adapter resources (IO, interrupt and memory), -// Some devices get extra resources, so have room for 10 resources -// UF_SIZE (sizeof(NDIS_RESOURCE_LIST) + (10*sizeof(CM_PARTIAL_RESOURCE_DESCRIPTOR))) - - -#define NIC_RESOURCE_B// -// IO space length -// -#define NIC_MAP_IOSPACE_LENGTH sizeof(CSR_STRUC) +#define RALINK_2883_VERSION ((u32)0x28830300) +#define RALINK_2880E_VERSION ((u32)0x28720200) +#define RALINK_3070_VERSION ((u32)0x30700200) #define MAX_RX_PKT_LEN 1520 -// -// Entry number for each DMA descriptor ring -// +/* */ +/* Entry number for each DMA descriptor ring */ +/* */ -#ifdef RT2860 -#define TX_RING_SIZE 64 //64 +#ifdef RTMP_MAC_PCI +#define TX_RING_SIZE 64 /*64 */ #define MGMT_RING_SIZE 128 -#define RX_RING_SIZE 128 //64 -#define MAX_TX_PROCESS TX_RING_SIZE //8 +#define RX_RING_SIZE 128 /*64 */ +#define MAX_TX_PROCESS TX_RING_SIZE /*8 */ #define MAX_DMA_DONE_PROCESS TX_RING_SIZE -#define MAX_TX_DONE_PROCESS TX_RING_SIZE //8 +#define MAX_TX_DONE_PROCESS TX_RING_SIZE /*8 */ #define LOCAL_TXBUF_SIZE 2 -#endif -#ifdef RT2870 -#define TX_RING_SIZE 8 // 1 -#define PRIO_RING_SIZE 8 -#define MGMT_RING_SIZE 32 // PRIO_RING_SIZE -#define RX_RING_SIZE 8 -#define MAX_TX_PROCESS 4 -#define LOCAL_TXBUF_SIZE 2048 -#endif // RT2870 // +#endif /* RTMP_MAC_PCI // */ -#define MAX_RX_PROCESS 128 //64 //32 +#define MAX_RX_PROCESS 128 /*64 //32 */ #define NUM_OF_LOCAL_TXBUF 2 #define TXD_SIZE 16 #define TXWI_SIZE 16 #define RXD_SIZE 16 #define RXWI_SIZE 16 -// TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header -#define TX_DMA_1ST_BUFFER_SIZE 96 // only the 1st physical buffer is pre-allocated -#define MGMT_DMA_BUFFER_SIZE 1536 //2048 -#define RX_BUFFER_AGGRESIZE 3840 //3904 //3968 //4096 //2048 //4096 -#define RX_BUFFER_NORMSIZE 3840 //3904 //3968 //4096 //2048 //4096 +/* TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header */ +#define TX_DMA_1ST_BUFFER_SIZE 96 /* only the 1st physical buffer is pre-allocated */ +#define MGMT_DMA_BUFFER_SIZE 1536 /*2048 */ +#define RX_BUFFER_AGGRESIZE 3840 /*3904 //3968 //4096 //2048 //4096 */ +#define RX_BUFFER_NORMSIZE 3840 /*3904 //3968 //4096 //2048 //4096 */ #define TX_BUFFER_NORMSIZE RX_BUFFER_NORMSIZE -#define MAX_FRAME_SIZE 2346 // Maximum 802.11 frame size -#define MAX_AGGREGATION_SIZE 3840 //3904 //3968 //4096 +#define MAX_FRAME_SIZE 2346 /* Maximum 802.11 frame size */ +#define MAX_AGGREGATION_SIZE 3840 /*3904 //3968 //4096 */ #define MAX_NUM_OF_TUPLE_CACHE 2 #define MAX_MCAST_LIST_SIZE 32 #define MAX_LEN_OF_VENDOR_DESC 64 -//#define MAX_SIZE_OF_MCAST_PSQ (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ +/*#define MAX_SIZE_OF_MCAST_PSQ (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ */ #define MAX_SIZE_OF_MCAST_PSQ 32 #define MAX_RX_PROCESS_CNT (RX_RING_SIZE) +/* + WMM Note: If memory of your system is not much, please reduce the definition; + or when you do WMM test, the queue for low priority AC will be full, i.e. + TX_RING_SIZE + MAX_PACKETS_IN_QUEUE packets for the AC will be buffered in + WLAN, maybe no any packet buffer can be got in Ethernet driver. + + Sometimes no packet buffer can be got in Ethernet driver, the system will + send flow control packet to the sender to slow down its sending rate. + So no WMM can be saw in the air. +*/ + +/* + Need to use 64 in vxworks for test case WMM A5-T07 + Two dnlink (10Mbps) from a WMM station to a non-WMM station. + If use 256, queue is not enough. + And in rt_main_end.c, clConfig.clNum = RX_RING_SIZE * 3; is changed to + clConfig.clNum = RX_RING_SIZE * 4; +*/ +/* TODO: For VxWorks the size is 256. Shall we cahnge the value as 256 for all OS????? */ +#define MAX_PACKETS_IN_QUEUE (512) /*(512) // to pass WMM A5-WPAPSK */ -#define MAX_PACKETS_IN_QUEUE (512) //(512) // to pass WMM A5-WPAPSK #define MAX_PACKETS_IN_MCAST_PS_QUEUE 32 -#define MAX_PACKETS_IN_PS_QUEUE 128 //32 -#define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */ +#define MAX_PACKETS_IN_PS_QUEUE 128 /*32 */ +#define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */ +#ifdef RTMP_EFUSE_SUPPORT +/*2008/09/11:KH add to support efuse<-- */ #define MAX_EEPROM_BIN_FILE_SIZE 1024 +#define EFUSE_BUFFER_PATH "/tmp/RT30xxEEPROM.bin" +/*2008/09/11:KH add to support efuse--> */ +#endif /* RTMP_EFUSE_SUPPORT // */ -// RxFilter +/* RxFilter */ #define STANORMAL 0x17f97 #define APNORMAL 0x15f97 -// -// RTMP_ADAPTER flags -// +#define PSPXLINK 0x17f93 +/* */ +/* struct rt_rtmp_adapter flags */ +/* */ #define fRTMP_ADAPTER_MAP_REGISTER 0x00000001 #define fRTMP_ADAPTER_INTERRUPT_IN_USE 0x00000002 #define fRTMP_ADAPTER_HARDWARE_ERROR 0x00000004 @@ -181,13 +171,13 @@ #define fRTMP_ADAPTER_SCAN_2040 0x04000000 #define fRTMP_ADAPTER_RADIO_MEASUREMENT 0x08000000 -#define fRTMP_ADAPTER_START_UP 0x10000000 //Devive already initialized and enabled Tx/Rx. +#define fRTMP_ADAPTER_START_UP 0x10000000 /*Devive already initialized and enabled Tx/Rx. */ #define fRTMP_ADAPTER_MEDIA_STATE_CHANGE 0x20000000 #define fRTMP_ADAPTER_IDLE_RADIO_OFF 0x40000000 -// -// STA operation status flags -// +/* */ +/* STA operation status flags */ +/* */ #define fOP_STATUS_INFRA_ON 0x00000001 #define fOP_STATUS_ADHOC_ON 0x00000002 #define fOP_STATUS_BG_PROTECTION_INUSED 0x00000004 @@ -197,28 +187,34 @@ #define fOP_STATUS_MEDIA_STATE_CONNECTED 0x00000080 #define fOP_STATUS_WMM_INUSED 0x00000100 #define fOP_STATUS_AGGREGATION_INUSED 0x00000200 -#define fOP_STATUS_DOZE 0x00000400 // debug purpose -#define fOP_STATUS_PIGGYBACK_INUSED 0x00000800 // piggy-back, and aggregation +#define fOP_STATUS_DOZE 0x00000400 /* debug purpose */ +#define fOP_STATUS_PIGGYBACK_INUSED 0x00000800 /* piggy-back, and aggregation */ #define fOP_STATUS_APSD_INUSED 0x00001000 #define fOP_STATUS_TX_AMSDU_INUSED 0x00002000 #define fOP_STATUS_MAX_RETRY_ENABLED 0x00004000 #define fOP_STATUS_WAKEUP_NOW 0x00008000 -#define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE 0x00020000 +#define fOP_STATUS_PCIE_DEVICE 0x00020000 +#define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE fOP_STATUS_PCIE_DEVICE -#ifdef RT2860 -// -// RTMP_ADAPTER PSFlags : related to advanced power save. -// -// Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up +/* */ +/* struct rt_rtmp_adapter PSFlags : related to advanced power save. */ +/* */ +/* Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up */ #define fRTMP_PS_CAN_GO_SLEEP 0x00000001 -// Indicate whether driver has issue a LinkControl command to PCIe L1 +/* Indicate whether driver has issue a LinkControl command to PCIe L1 */ #define fRTMP_PS_SET_PCI_CLK_OFF_COMMAND 0x00000002 -// Indicate driver should disable kick off hardware to send packets from now. +/* Indicate driver should disable kick off hardware to send packets from now. */ #define fRTMP_PS_DISABLE_TX 0x00000004 -// Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me -//. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. +/* Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me */ +/*. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. */ #define fRTMP_PS_GO_TO_SLEEP_NOW 0x00000008 -#endif +#define fRTMP_PS_TOGGLE_L1 0x00000010 /* Use Toggle L1 mechanism for rt28xx PCIe */ + +#ifdef RT3090 +#define WAKE_MCU_CMD 0x31 +#define SLEEP_MCU_CMD 0x30 +#define RFOFF_MCU_CMD 0x35 +#endif /* RT3090 // */ #define CCKSETPROTECT 0x1 #define OFDMSETPROTECT 0x2 @@ -228,12 +224,12 @@ #define GR40SETPROTECT 0x20 #define ALLN_SETPROTECT (GR40SETPROTECT | GF20SETPROTECT | MM40SETPROTECT | MM20SETPROTECT) -// -// AP's client table operation status flags -// -#define fCLIENT_STATUS_WMM_CAPABLE 0x00000001 // CLIENT can parse QOS DATA frame -#define fCLIENT_STATUS_AGGREGATION_CAPABLE 0x00000002 // CLIENT can receive Ralink's proprietary TX aggregation frame -#define fCLIENT_STATUS_PIGGYBACK_CAPABLE 0x00000004 // CLIENT support piggy-back +/* */ +/* AP's client table operation status flags */ +/* */ +#define fCLIENT_STATUS_WMM_CAPABLE 0x00000001 /* CLIENT can parse QOS DATA frame */ +#define fCLIENT_STATUS_AGGREGATION_CAPABLE 0x00000002 /* CLIENT can receive Ralink's proprietary TX aggregation frame */ +#define fCLIENT_STATUS_PIGGYBACK_CAPABLE 0x00000004 /* CLIENT support piggy-back */ #define fCLIENT_STATUS_AMSDU_INUSED 0x00000008 #define fCLIENT_STATUS_SGI20_CAPABLE 0x00000010 #define fCLIENT_STATUS_SGI40_CAPABLE 0x00000020 @@ -242,47 +238,48 @@ #define fCLIENT_STATUS_HTC_CAPABLE 0x00000100 #define fCLIENT_STATUS_RDG_CAPABLE 0x00000200 #define fCLIENT_STATUS_MCSFEEDBACK_CAPABLE 0x00000400 -#define fCLIENT_STATUS_APSD_CAPABLE 0x00000800 /* UAPSD STATION */ +#define fCLIENT_STATUS_APSD_CAPABLE 0x00000800 /* UAPSD STATION */ #define fCLIENT_STATUS_RALINK_CHIPSET 0x00100000 -// -// STA configuration flags -// +/* */ +/* STA configuration flags */ +/* */ -// 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case +/* 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case */ #define HT_NO_PROTECT 0 #define HT_LEGACY_PROTECT 1 #define HT_40_PROTECT 2 #define HT_2040_PROTECT 3 #define HT_RTSCTS_6M 7 -//following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE. -#define HT_ATHEROS 8 // rt2860c has problem with atheros chip. we need to turn on RTS/CTS . -#define HT_FORCERTSCTS 9 // Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary. +/*following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE. */ +#define HT_ATHEROS 8 /* rt2860c has problem with atheros chip. we need to turn on RTS/CTS . */ +#define HT_FORCERTSCTS 9 /* Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary. */ -// -// RX Packet Filter control flags. Apply on pAd->PacketFilter -// +/* */ +/* RX Packet Filter control flags. Apply on pAd->PacketFilter */ +/* */ #define fRX_FILTER_ACCEPT_DIRECT NDIS_PACKET_TYPE_DIRECTED #define fRX_FILTER_ACCEPT_MULTICAST NDIS_PACKET_TYPE_MULTICAST #define fRX_FILTER_ACCEPT_BROADCAST NDIS_PACKET_TYPE_BROADCAST #define fRX_FILTER_ACCEPT_ALL_MULTICAST NDIS_PACKET_TYPE_ALL_MULTICAST +#define fRX_FILTER_ACCEPT_PROMISCUOUS NDIS_PACKET_TYPE_PROMISCUOUS -// -// Error code section -// -// NDIS_ERROR_CODE_ADAPTER_NOT_FOUND +/* */ +/* Error code section */ +/* */ +/* NDIS_ERROR_CODE_ADAPTER_NOT_FOUND */ #define ERRLOG_READ_PCI_SLOT_FAILED 0x00000101L #define ERRLOG_WRITE_PCI_SLOT_FAILED 0x00000102L #define ERRLOG_VENDOR_DEVICE_NOMATCH 0x00000103L -// NDIS_ERROR_CODE_ADAPTER_DISABLED +/* NDIS_ERROR_CODE_ADAPTER_DISABLED */ #define ERRLOG_BUS_MASTER_DISABLED 0x00000201L -// NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION +/* NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION */ #define ERRLOG_INVALID_SPEED_DUPLEX 0x00000301L #define ERRLOG_SET_SECONDARY_FAILED 0x00000302L -// NDIS_ERROR_CODE_OUT_OF_RESOURCES +/* NDIS_ERROR_CODE_OUT_OF_RESOURCES */ #define ERRLOG_OUT_OF_MEMORY 0x00000401L #define ERRLOG_OUT_OF_SHARED_MEMORY 0x00000402L #define ERRLOG_OUT_OF_MAP_REGISTERS 0x00000403L @@ -292,22 +289,21 @@ #define ERRLOG_OUT_OF_NDIS_PACKET 0x00000407L #define ERRLOG_OUT_OF_LOOKASIDE_MEMORY 0x00000408L -// NDIS_ERROR_CODE_HARDWARE_FAILURE +/* NDIS_ERROR_CODE_HARDWARE_FAILURE */ #define ERRLOG_SELFTEST_FAILED 0x00000501L #define ERRLOG_INITIALIZE_ADAPTER 0x00000502L #define ERRLOG_REMOVE_MINIPORT 0x00000503L -// NDIS_ERROR_CODE_RESOURCE_CONFLICT +/* NDIS_ERROR_CODE_RESOURCE_CONFLICT */ #define ERRLOG_MAP_IO_SPACE 0x00000601L #define ERRLOG_QUERY_ADAPTER_RESOURCES 0x00000602L #define ERRLOG_NO_IO_RESOURCE 0x00000603L #define ERRLOG_NO_INTERRUPT_RESOURCE 0x00000604L #define ERRLOG_NO_MEMORY_RESOURCE 0x00000605L - -// WDS definition +/* WDS definition */ #define MAX_WDS_ENTRY 4 -#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table +#define WDS_PAIRWISE_KEY_OFFSET 60 /* WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table */ #define WDS_DISABLE_MODE 0 #define WDS_RESTRICT_MODE 1 @@ -315,23 +311,20 @@ #define WDS_REPEATER_MODE 3 #define WDS_LAZY_MODE 4 - #define MAX_MESH_NUM 0 #define MAX_APCLI_NUM 0 #define MAX_MBSSID_NUM 1 -#if defined(RT2860) || defined(RT30xx) #ifdef MBSS_SUPPORT #undef MAX_MBSSID_NUM #define MAX_MBSSID_NUM (8 - MAX_MESH_NUM - MAX_APCLI_NUM) -#endif // MBSS_SUPPORT // -#endif +#endif /* MBSS_SUPPORT // */ /* sanity check for apidx */ #define MBSS_MR_APIDX_SANITY_CHECK(apidx) \ { if (apidx > MAX_MBSSID_NUM) { \ - printk("%s> Error! apidx = %d > MAX_MBSSID_NUM!\n", __func__, apidx); \ + DBGPRINT(RT_DEBUG_ERROR, ("%s> Error! apidx = %d > MAX_MBSSID_NUM!\n", __func__, apidx)); \ apidx = MAIN_MBSSID; } } #define VALID_WCID(_wcid) ((_wcid) > 0 && (_wcid) < MAX_LEN_OF_MAC_TABLE ) @@ -339,12 +332,11 @@ #define MAIN_MBSSID 0 #define FIRST_MBSSID 1 - #define MAX_BEACON_SIZE 512 -// If the MAX_MBSSID_NUM is larger than 6, -// it shall reserve some WCID space(wcid 222~253) for beacon frames. -// - these wcid 238~253 are reserved for beacon#6(ra6). -// - these wcid 222~237 are reserved for beacon#7(ra7). +/* If the MAX_MBSSID_NUM is larger than 6, */ +/* it shall reserve some WCID space(wcid 222~253) for beacon frames. */ +/* - these wcid 238~253 are reserved for beacon#6(ra6). */ +/* - these wcid 222~237 are reserved for beacon#7(ra7). */ #if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8) #define HW_RESERVED_WCID 222 #elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7) @@ -353,17 +345,17 @@ #define HW_RESERVED_WCID 255 #endif -// Then dedicate wcid of DFS and Carrier-Sense. +/* Then dedicate wcid of DFS and Carrier-Sense. */ #define DFS_CTS_WCID (HW_RESERVED_WCID - 1) #define CS_CTS_WCID (HW_RESERVED_WCID - 2) #define LAST_SPECIFIC_WCID (HW_RESERVED_WCID - 2) -// If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211. -// If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228. +/* If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211. */ +/* If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228. */ #define MAX_AVAILABLE_CLIENT_WCID (LAST_SPECIFIC_WCID - MAX_MBSSID_NUM - 1) -// TX need WCID to find Cipher Key -// these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8. +/* TX need WCID to find Cipher Key */ +/* these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8. */ #define GET_GroupKey_WCID(__wcid, __bssidx) \ { \ __wcid = LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM) + __bssidx; \ @@ -371,8 +363,7 @@ #define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM)))) - -// definition to support multiple BSSID +/* definition to support multiple BSSID */ #define BSS0 0 #define BSS1 1 #define BSS2 2 @@ -382,26 +373,26 @@ #define BSS6 6 #define BSS7 7 - -//============================================================ -// Length definitions +/*============================================================ */ +/* Length definitions */ #define PEER_KEY_NO 2 #define MAC_ADDR_LEN 6 #define TIMESTAMP_LEN 8 -#define MAX_LEN_OF_SUPPORTED_RATES MAX_LENGTH_OF_SUPPORT_RATES // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 -#define MAX_LEN_OF_KEY 32 // 32 octets == 256 bits, Redefine for WPA -#define MAX_NUM_OF_CHANNELS MAX_NUM_OF_CHS // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination -#define MAX_NUM_OF_11JCHANNELS 20 // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination +#define MAX_LEN_OF_SUPPORTED_RATES MAX_LENGTH_OF_SUPPORT_RATES /* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */ +#define MAX_LEN_OF_KEY 32 /* 32 octets == 256 bits, Redefine for WPA */ +#define MAX_NUM_OF_CHANNELS MAX_NUM_OF_CHS /* 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination */ +#define MAX_NUM_OF_11JCHANNELS 20 /* 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination */ #define MAX_LEN_OF_SSID 32 #define CIPHER_TEXT_LEN 128 #define HASH_TABLE_SIZE 256 -#define MAX_VIE_LEN 1024 // New for WPA cipher suite variable IE sizes. +#define MAX_VIE_LEN 1024 /* New for WPA cipher suite variable IE sizes. */ #define MAX_SUPPORT_MCS 32 +#define MAX_NUM_OF_BBP_LATCH 140 -//============================================================ -// ASIC WCID Table definition. -//============================================================ -#define BSSID_WCID 1 // in infra mode, always put bssid with this WCID +/*============================================================ */ +/* ASIC WCID Table definition. */ +/*============================================================ */ +#define BSSID_WCID 1 /* in infra mode, always put bssid with this WCID */ #define MCAST_WCID 0x0 #define BSS0Mcast_WCID 0x0 #define BSS1Mcast_WCID 0xf8 @@ -415,10 +406,10 @@ #define MAX_NUM_OF_ACL_LIST MAX_NUMBER_OF_ACL -#define MAX_LEN_OF_MAC_TABLE MAX_NUMBER_OF_MAC // if MAX_MBSSID_NUM is 8, this value can't be larger than 211 +#define MAX_LEN_OF_MAC_TABLE MAX_NUMBER_OF_MAC /* if MAX_MBSSID_NUM is 8, this value can't be larger than 211 */ #if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID -#error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!! +#error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID! #endif #define MAX_NUM_OF_WDS_LINK_PERBSSID 3 @@ -428,42 +419,41 @@ #define NUM_OF_TID 8 #define MAX_AID_BA 4 -#define MAX_LEN_OF_BA_REC_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)// (NUM_OF_TID*MAX_AID_BA + 32) //Block ACK recipient -#define MAX_LEN_OF_BA_ORI_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)// (NUM_OF_TID*MAX_AID_BA + 32) // Block ACK originator +#define MAX_LEN_OF_BA_REC_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2) /* (NUM_OF_TID*MAX_AID_BA + 32) //Block ACK recipient */ +#define MAX_LEN_OF_BA_ORI_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2) /* (NUM_OF_TID*MAX_AID_BA + 32) // Block ACK originator */ #define MAX_LEN_OF_BSS_TABLE 64 #define MAX_REORDERING_MPDU_NUM 512 -// key related definitions +/* key related definitions */ #define SHARE_KEY_NUM 4 -#define MAX_LEN_OF_SHARE_KEY 16 // byte count -#define MAX_LEN_OF_PEER_KEY 16 // byte count -#define PAIRWISE_KEY_NUM 64 // in MAC ASIC pairwise key table +#define MAX_LEN_OF_SHARE_KEY 16 /* byte count */ +#define MAX_LEN_OF_PEER_KEY 16 /* byte count */ +#define PAIRWISE_KEY_NUM 64 /* in MAC ASIC pairwise key table */ #define GROUP_KEY_NUM 4 #define PMK_LEN 32 -#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table -#define PMKID_NO 4 // Number of PMKID saved supported +#define WDS_PAIRWISE_KEY_OFFSET 60 /* WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table */ +#define PMKID_NO 4 /* Number of PMKID saved supported */ #define MAX_LEN_OF_MLME_BUFFER 2048 -// power status related definitions +/* power status related definitions */ #define PWR_ACTIVE 0 #define PWR_SAVE 1 -#define PWR_MMPS 2 //MIMO power save +#define PWR_MMPS 2 /*MIMO power save */ -// Auth and Assoc mode related definitions +/* Auth and Assoc mode related definitions */ #define AUTH_MODE_OPEN 0x00 #define AUTH_MODE_KEY 0x01 -// BSS Type definitions -#define BSS_ADHOC 0 // = Ndis802_11IBSS -#define BSS_INFRA 1 // = Ndis802_11Infrastructure -#define BSS_ANY 2 // = Ndis802_11AutoUnknown -#define BSS_MONITOR 3 // = Ndis802_11Monitor - +/* BSS Type definitions */ +#define BSS_ADHOC 0 /* = Ndis802_11IBSS */ +#define BSS_INFRA 1 /* = Ndis802_11Infrastructure */ +#define BSS_ANY 2 /* = Ndis802_11AutoUnknown */ +#define BSS_MONITOR 3 /* = Ndis802_11Monitor */ -// Reason code definitions +/* Reason code definitions */ #define REASON_RESERVED 0 #define REASON_UNSPECIFY 1 -#define REASON_NO_LONGER_VALID 2 +#define REASON_NO_longER_VALID 2 #define REASON_DEAUTH_STA_LEAVING 3 #define REASON_DISASSOC_INACTIVE 4 #define REASON_DISASSPC_AP_UNABLE 5 @@ -495,7 +485,7 @@ #define REASON_QOS_REQUEST_TIMEOUT 39 #define REASON_QOS_CIPHER_NOT_SUPPORT 45 -// Status code definitions +/* Status code definitions */ #define MLME_SUCCESS 0 #define MLME_UNSPECIFY_FAIL 1 #define MLME_CANNOT_SUPPORT_CAP 10 @@ -515,6 +505,9 @@ #define MLME_QOS_UNSPECIFY 32 #define MLME_REQUEST_DECLINED 37 #define MLME_REQUEST_WITH_INVALID_PARAM 38 +#define MLME_INVALID_GROUP_CIPHER 41 +#define MLME_INVALID_PAIRWISE_CIPHER 42 +#define MLME_INVALID_AKMP 43 #define MLME_DLS_NOT_ALLOW_IN_QBSS 48 #define MLME_DEST_STA_NOT_IN_QBSS 49 #define MLME_DEST_STA_IS_NOT_A_QSTA 50 @@ -524,7 +517,7 @@ #define MLME_STATE_MACHINE_REJECT 0x53 #define MLME_MAC_TABLE_FAIL 0x54 -// IE code +/* IE code */ #define IE_SSID 0 #define IE_SUPP_RATES 1 #define IE_FH_PARM 2 @@ -532,94 +525,95 @@ #define IE_CF_PARM 4 #define IE_TIM 5 #define IE_IBSS_PARM 6 -#define IE_COUNTRY 7 // 802.11d -#define IE_802_11D_REQUEST 10 // 802.11d -#define IE_QBSS_LOAD 11 // 802.11e d9 -#define IE_EDCA_PARAMETER 12 // 802.11e d9 -#define IE_TSPEC 13 // 802.11e d9 -#define IE_TCLAS 14 // 802.11e d9 -#define IE_SCHEDULE 15 // 802.11e d9 +#define IE_COUNTRY 7 /* 802.11d */ +#define IE_802_11D_REQUEST 10 /* 802.11d */ +#define IE_QBSS_LOAD 11 /* 802.11e d9 */ +#define IE_EDCA_PARAMETER 12 /* 802.11e d9 */ +#define IE_TSPEC 13 /* 802.11e d9 */ +#define IE_TCLAS 14 /* 802.11e d9 */ +#define IE_SCHEDULE 15 /* 802.11e d9 */ #define IE_CHALLENGE_TEXT 16 -#define IE_POWER_CONSTRAINT 32 // 802.11h d3.3 -#define IE_POWER_CAPABILITY 33 // 802.11h d3.3 -#define IE_TPC_REQUEST 34 // 802.11h d3.3 -#define IE_TPC_REPORT 35 // 802.11h d3.3 -#define IE_SUPP_CHANNELS 36 // 802.11h d3.3 -#define IE_CHANNEL_SWITCH_ANNOUNCEMENT 37 // 802.11h d3.3 -#define IE_MEASUREMENT_REQUEST 38 // 802.11h d3.3 -#define IE_MEASUREMENT_REPORT 39 // 802.11h d3.3 -#define IE_QUIET 40 // 802.11h d3.3 -#define IE_IBSS_DFS 41 // 802.11h d3.3 -#define IE_ERP 42 // 802.11g -#define IE_TS_DELAY 43 // 802.11e d9 -#define IE_TCLAS_PROCESSING 44 // 802.11e d9 -#define IE_QOS_CAPABILITY 46 // 802.11e d6 -#define IE_HT_CAP 45 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD -#define IE_AP_CHANNEL_REPORT 51 // 802.11k d6 -#define IE_HT_CAP2 52 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD -#define IE_RSN 48 // 802.11i d3.0 -#define IE_WPA2 48 // WPA2 -#define IE_EXT_SUPP_RATES 50 // 802.11g -#define IE_SUPP_REG_CLASS 59 // 802.11y. Supported regulatory classes. -#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT 60 // 802.11n -#define IE_ADD_HT 61 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD -#define IE_ADD_HT2 53 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD - - -// For 802.11n D3.03 -//#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet -#define IE_SECONDARY_CH_OFFSET 62 // 802.11n D3.03 Secondary Channel Offset element -#define IE_2040_BSS_COEXIST 72 // 802.11n D3.0.3 -#define IE_2040_BSS_INTOLERANT_REPORT 73 // 802.11n D3.03 -#define IE_OVERLAPBSS_SCAN_PARM 74 // 802.11n D3.03 -#define IE_EXT_CAPABILITY 127 // 802.11n D3.03 - - -#define IE_WPA 221 // WPA -#define IE_VENDOR_SPECIFIC 221 // Wifi WMM (WME) - -#define OUI_BROADCOM_HT 51 // -#define OUI_BROADCOM_HTADD 52 // -#define OUI_PREN_HT_CAP 51 // -#define OUI_PREN_ADD_HT 52 // - -// CCX information -#define IE_AIRONET_CKIP 133 // CCX1.0 ID 85H for CKIP -#define IE_AP_TX_POWER 150 // CCX 2.0 for AP transmit power -#define IE_MEASUREMENT_CAPABILITY 221 // CCX 2.0 +#define IE_POWER_CONSTRAint 32 /* 802.11h d3.3 */ +#define IE_POWER_CAPABILITY 33 /* 802.11h d3.3 */ +#define IE_TPC_REQUEST 34 /* 802.11h d3.3 */ +#define IE_TPC_REPORT 35 /* 802.11h d3.3 */ +#define IE_SUPP_CHANNELS 36 /* 802.11h d3.3 */ +#define IE_CHANNEL_SWITCH_ANNOUNCEMENT 37 /* 802.11h d3.3 */ +#define IE_MEASUREMENT_REQUEST 38 /* 802.11h d3.3 */ +#define IE_MEASUREMENT_REPORT 39 /* 802.11h d3.3 */ +#define IE_QUIET 40 /* 802.11h d3.3 */ +#define IE_IBSS_DFS 41 /* 802.11h d3.3 */ +#define IE_ERP 42 /* 802.11g */ +#define IE_TS_DELAY 43 /* 802.11e d9 */ +#define IE_TCLAS_PROCESSING 44 /* 802.11e d9 */ +#define IE_QOS_CAPABILITY 46 /* 802.11e d6 */ +#define IE_HT_CAP 45 /* 802.11n d1. HT CAPABILITY. ELEMENT ID TBD */ +#define IE_AP_CHANNEL_REPORT 51 /* 802.11k d6 */ +#define IE_HT_CAP2 52 /* 802.11n d1. HT CAPABILITY. ELEMENT ID TBD */ +#define IE_RSN 48 /* 802.11i d3.0 */ +#define IE_WPA2 48 /* WPA2 */ +#define IE_EXT_SUPP_RATES 50 /* 802.11g */ +#define IE_SUPP_REG_CLASS 59 /* 802.11y. Supported regulatory classes. */ +#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT 60 /* 802.11n */ +#define IE_ADD_HT 61 /* 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD */ +#define IE_ADD_HT2 53 /* 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD */ + +/* For 802.11n D3.03 */ +/*#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet */ +#define IE_SECONDARY_CH_OFFSET 62 /* 802.11n D3.03 Secondary Channel Offset element */ +#define IE_WAPI 68 /* WAPI information element */ +#define IE_2040_BSS_COEXIST 72 /* 802.11n D3.0.3 */ +#define IE_2040_BSS_INTOLERANT_REPORT 73 /* 802.11n D3.03 */ +#define IE_OVERLAPBSS_SCAN_PARM 74 /* 802.11n D3.03 */ +#define IE_EXT_CAPABILITY 127 /* 802.11n D3.03 */ + +#define IE_WPA 221 /* WPA */ +#define IE_VENDOR_SPECIFIC 221 /* Wifi WMM (WME) */ + +#define OUI_BROADCOM_HT 51 /* */ +#define OUI_BROADCOM_HTADD 52 /* */ +#define OUI_PREN_HT_CAP 51 /* */ +#define OUI_PREN_ADD_HT 52 /* */ + +/* CCX information */ +#define IE_AIRONET_CKIP 133 /* CCX1.0 ID 85H for CKIP */ +#define IE_AP_TX_POWER 150 /* CCX 2.0 for AP transmit power */ +#define IE_MEASUREMENT_CAPABILITY 221 /* CCX 2.0 */ #define IE_CCX_V2 221 -#define IE_AIRONET_IPADDRESS 149 // CCX ID 95H for IP Address -#define IE_AIRONET_CCKMREASSOC 156 // CCX ID 9CH for CCKM Reassociation Request element +#define IE_AIRONET_IPADDRESS 149 /* CCX ID 95H for IP Address */ +#define IE_AIRONET_CCKMREASSOC 156 /* CCX ID 9CH for CCKM Reassociation Request element */ #define CKIP_NEGOTIATION_LENGTH 30 #define AIRONET_IPADDRESS_LENGTH 10 #define AIRONET_CCKMREASSOC_LENGTH 24 -// ======================================================== -// MLME state machine definition -// ======================================================== +/* ======================================================== */ +/* MLME state machine definition */ +/* ======================================================== */ -// STA MLME state mahcines +/* STA MLME state mahcines */ #define ASSOC_STATE_MACHINE 1 #define AUTH_STATE_MACHINE 2 #define AUTH_RSP_STATE_MACHINE 3 #define SYNC_STATE_MACHINE 4 #define MLME_CNTL_STATE_MACHINE 5 #define WPA_PSK_STATE_MACHINE 6 -#define LEAP_STATE_MACHINE 7 +/*#define LEAP_STATE_MACHINE 7 */ #define AIRONET_STATE_MACHINE 8 #define ACTION_STATE_MACHINE 9 -// AP MLME state machines +/* AP MLME state machines */ #define AP_ASSOC_STATE_MACHINE 11 #define AP_AUTH_STATE_MACHINE 12 -#define AP_AUTH_RSP_STATE_MACHINE 13 #define AP_SYNC_STATE_MACHINE 14 #define AP_CNTL_STATE_MACHINE 15 -#define AP_WPA_STATE_MACHINE 16 +#define WSC_STATE_MACHINE 17 +#define WSC_UPNP_STATE_MACHINE 18 + +#define WPA_STATE_MACHINE 23 -// -// STA's CONTROL/CONNECT state machine: states, events, total function # -// +/* */ +/* STA's CONTROL/CONNECT state machine: states, events, total function # */ +/* */ #define CNTL_IDLE 0 #define CNTL_WAIT_DISASSOC 1 #define CNTL_WAIT_JOIN 2 @@ -630,9 +624,9 @@ #define CNTL_WAIT_AUTH2 7 #define CNTL_WAIT_OID_LIST_SCAN 8 #define CNTL_WAIT_OID_DISASSOC 9 -#ifdef RT2870 +#ifdef RTMP_MAC_USB #define CNTL_WAIT_SCAN_FOR_CONNECT 10 -#endif // RT2870 // +#endif /* RTMP_MAC_USB // */ #define MT2_ASSOC_CONF 34 #define MT2_AUTH_CONF 35 @@ -646,13 +640,14 @@ #define MT2_GET_CONF 43 #define MT2_SET_CONF 44 #define MT2_RESET_CONF 45 +#define MT2_FT_OTD_CONF 46 #define MT2_MLME_ROAMING_REQ 52 #define CNTL_FUNC_SIZE 1 -// -// STA's ASSOC state machine: states, events, total function # -// +/* */ +/* STA's ASSOC state machine: states, events, total function # */ +/* */ #define ASSOC_IDLE 0 #define ASSOC_WAIT_RSP 1 #define REASSOC_WAIT_RSP 2 @@ -675,24 +670,26 @@ #define ASSOC_FUNC_SIZE (MAX_ASSOC_STATE * MAX_ASSOC_MSG) -// -// ACT state machine: states, events, total function # -// +/* */ +/* ACT state machine: states, events, total function # */ +/* */ #define ACT_IDLE 0 #define MAX_ACT_STATE 1 #define ACT_MACHINE_BASE 0 -//Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self. -//Category +/*Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self. */ +/*Category */ #define MT2_PEER_SPECTRUM_CATE 0 #define MT2_PEER_QOS_CATE 1 #define MT2_PEER_DLS_CATE 2 #define MT2_PEER_BA_CATE 3 #define MT2_PEER_PUBLIC_CATE 4 #define MT2_PEER_RM_CATE 5 -#define MT2_PEER_HT_CATE 7 // 7.4.7 +/* "FT_CATEGORY_BSS_TRANSITION equal to 6" is defined file of "dot11r_ft.h" */ +#define MT2_PEER_HT_CATE 7 /* 7.4.7 */ #define MAX_PEER_CATE_MSG 7 + #define MT2_MLME_ADD_BA_CATE 8 #define MT2_MLME_ORI_DELBA_CATE 9 #define MT2_MLME_REC_DELBA_CATE 10 @@ -701,7 +698,7 @@ #define MT2_ACT_INVALID 13 #define MAX_ACT_MSG 14 -//Category field +/*Category field */ #define CATEGORY_SPECTRUM 0 #define CATEGORY_QOS 1 #define CATEGORY_DLS 2 @@ -710,38 +707,35 @@ #define CATEGORY_RM 5 #define CATEGORY_HT 7 - -// DLS Action frame definition +/* DLS Action frame definition */ #define ACTION_DLS_REQUEST 0 #define ACTION_DLS_RESPONSE 1 #define ACTION_DLS_TEARDOWN 2 -//Spectrum Action field value 802.11h 7.4.1 -#define SPEC_MRQ 0 // Request -#define SPEC_MRP 1 //Report +/*Spectrum Action field value 802.11h 7.4.1 */ +#define SPEC_MRQ 0 /* Request */ +#define SPEC_MRP 1 /*Report */ #define SPEC_TPCRQ 2 #define SPEC_TPCRP 3 #define SPEC_CHANNEL_SWITCH 4 - -//BA Action field value +/*BA Action field value */ #define ADDBA_REQ 0 #define ADDBA_RESP 1 #define DELBA 2 -//Public's Action field value in Public Category. Some in 802.11y and some in 11n -#define ACTION_BSS_2040_COEXIST 0 // 11n -#define ACTION_DSE_ENABLEMENT 1 // 11y D9.0 -#define ACTION_DSE_DEENABLEMENT 2 // 11y D9.0 -#define ACTION_DSE_REG_LOCATION_ANNOUNCE 3 // 11y D9.0 -#define ACTION_EXT_CH_SWITCH_ANNOUNCE 4 // 11y D9.0 -#define ACTION_DSE_MEASUREMENT_REQ 5 // 11y D9.0 -#define ACTION_DSE_MEASUREMENT_REPORT 6 // 11y D9.0 -#define ACTION_MEASUREMENT_PILOT_ACTION 7 // 11y D9.0 -#define ACTION_DSE_POWER_CONSTRAINT 8 // 11y D9.0 - - -//HT Action field value +/*Public's Action field value in Public Category. Some in 802.11y and some in 11n */ +#define ACTION_BSS_2040_COEXIST 0 /* 11n */ +#define ACTION_DSE_ENABLEMENT 1 /* 11y D9.0 */ +#define ACTION_DSE_DEENABLEMENT 2 /* 11y D9.0 */ +#define ACTION_DSE_REG_LOCATION_ANNOUNCE 3 /* 11y D9.0 */ +#define ACTION_EXT_CH_SWITCH_ANNOUNCE 4 /* 11y D9.0 */ +#define ACTION_DSE_MEASUREMENT_REQ 5 /* 11y D9.0 */ +#define ACTION_DSE_MEASUREMENT_REPORT 6 /* 11y D9.0 */ +#define ACTION_MEASUREMENT_PILOT_ACTION 7 /* 11y D9.0 */ +#define ACTION_DSE_POWER_CONSTRAINT 8 /* 11y D9.0 */ + +/*HT Action field value */ #define NOTIFY_BW_ACTION 0 #define SMPS_ACTION 1 #define PSMP_ACTION 2 @@ -753,9 +747,9 @@ #define HT_INFO_EXCHANGE 8 #define ACT_FUNC_SIZE (MAX_ACT_STATE * MAX_ACT_MSG) -// -// STA's AUTHENTICATION state machine: states, evvents, total function # -// +/* */ +/* STA's AUTHENTICATION state machine: states, evvents, total function # */ +/* */ #define AUTH_REQ_IDLE 0 #define AUTH_WAIT_SEQ2 1 #define AUTH_WAIT_SEQ4 2 @@ -769,9 +763,9 @@ #define AUTH_FUNC_SIZE (MAX_AUTH_STATE * MAX_AUTH_MSG) -// -// STA's AUTH_RSP state machine: states, events, total function # -// +/* */ +/* STA's AUTH_RSP state machine: states, events, total function # */ +/* */ #define AUTH_RSP_IDLE 0 #define AUTH_RSP_WAIT_CHAL 1 #define MAX_AUTH_RSP_STATE 2 @@ -784,10 +778,10 @@ #define AUTH_RSP_FUNC_SIZE (MAX_AUTH_RSP_STATE * MAX_AUTH_RSP_MSG) -// -// STA's SYNC state machine: states, events, total function # -// -#define SYNC_IDLE 0 // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state +/* */ +/* STA's SYNC state machine: states, events, total function # */ +/* */ +#define SYNC_IDLE 0 /* merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state */ #define JOIN_WAIT_BEACON 1 #define SCAN_LISTEN 2 #define MAX_SYNC_STATE 3 @@ -807,7 +801,7 @@ #define SYNC_FUNC_SIZE (MAX_SYNC_STATE * MAX_SYNC_MSG) -//Messages for the DLS state machine +/*Messages for the DLS state machine */ #define DLS_IDLE 0 #define MAX_DLS_STATE 1 @@ -821,45 +815,18 @@ #define DLS_FUNC_SIZE (MAX_DLS_STATE * MAX_DLS_MSG) -// -// STA's WPA-PSK State machine: states, events, total function # -// -#define WPA_PSK_IDLE 0 -#define MAX_WPA_PSK_STATE 1 - -#define WPA_MACHINE_BASE 0 -#define MT2_EAPPacket 0 -#define MT2_EAPOLStart 1 -#define MT2_EAPOLLogoff 2 -#define MT2_EAPOLKey 3 -#define MT2_EAPOLASFAlert 4 -#define MAX_WPA_PSK_MSG 5 - -#define WPA_PSK_FUNC_SIZE (MAX_WPA_PSK_STATE * MAX_WPA_PSK_MSG) - -// -// STA's CISCO-AIRONET State machine: states, events, total function # -// -#define AIRONET_IDLE 0 -#define AIRONET_SCANNING 1 -#define MAX_AIRONET_STATE 2 - -#define AIRONET_MACHINE_BASE 0 -#define MT2_AIRONET_MSG 0 -#define MT2_AIRONET_SCAN_REQ 1 -#define MT2_AIRONET_SCAN_DONE 2 -#define MAX_AIRONET_MSG 3 - -#define AIRONET_FUNC_SIZE (MAX_AIRONET_STATE * MAX_AIRONET_MSG) - -// -// AP's CONTROL/CONNECT state machine: states, events, total function # -// +/* */ +/* WSC State machine: states, events, total function # */ +/* */ + +/* */ +/* AP's CONTROL/CONNECT state machine: states, events, total function # */ +/* */ #define AP_CNTL_FUNC_SIZE 1 -// -// AP's ASSOC state machine: states, events, total function # -// +/* */ +/* AP's ASSOC state machine: states, events, total function # */ +/* */ #define AP_ASSOC_IDLE 0 #define AP_MAX_ASSOC_STATE 1 @@ -873,36 +840,25 @@ #define AP_ASSOC_FUNC_SIZE (AP_MAX_ASSOC_STATE * AP_MAX_ASSOC_MSG) -// -// AP's AUTHENTICATION state machine: states, events, total function # -// +/* */ +/* AP's AUTHENTICATION state machine: states, events, total function # */ +/* */ #define AP_AUTH_REQ_IDLE 0 #define AP_MAX_AUTH_STATE 1 #define AP_AUTH_MACHINE_BASE 0 #define APMT2_MLME_DEAUTH_REQ 0 #define APMT2_CLS2ERR 1 -#define AP_MAX_AUTH_MSG 2 - -#define AP_AUTH_FUNC_SIZE (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG) - -// -// AP's AUTH-RSP state machine: states, events, total function # -// -#define AP_AUTH_RSP_IDLE 0 -#define AP_MAX_AUTH_RSP_STATE 1 - -#define AP_AUTH_RSP_MACHINE_BASE 0 -#define APMT2_AUTH_CHALLENGE_TIMEOUT 0 -#define APMT2_PEER_AUTH_ODD 1 #define APMT2_PEER_DEAUTH 2 -#define AP_MAX_AUTH_RSP_MSG 3 +#define APMT2_PEER_AUTH_REQ 3 +#define APMT2_PEER_AUTH_CONFIRM 4 +#define AP_MAX_AUTH_MSG 5 -#define AP_AUTH_RSP_FUNC_SIZE (AP_MAX_AUTH_RSP_STATE * AP_MAX_AUTH_RSP_MSG) +#define AP_AUTH_FUNC_SIZE (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG) -// -// AP's SYNC state machine: states, events, total function # -// +/* */ +/* AP's SYNC state machine: states, events, total function # */ +/* */ #define AP_SYNC_IDLE 0 #define AP_SCAN_LISTEN 1 #define AP_MAX_SYNC_STATE 2 @@ -918,30 +874,30 @@ #define AP_SYNC_FUNC_SIZE (AP_MAX_SYNC_STATE * AP_MAX_SYNC_MSG) -// -// AP's WPA state machine: states, events, total function # -// -#define AP_WPA_PTK 0 -#define AP_MAX_WPA_PTK_STATE 1 +/* */ +/* Common WPA state machine: states, events, total function # */ +/* */ +#define WPA_PTK 0 +#define MAX_WPA_PTK_STATE 1 -#define AP_WPA_MACHINE_BASE 0 -#define APMT2_EAPPacket 0 -#define APMT2_EAPOLStart 1 -#define APMT2_EAPOLLogoff 2 -#define APMT2_EAPOLKey 3 -#define APMT2_EAPOLASFAlert 4 -#define AP_MAX_WPA_MSG 5 +#define WPA_MACHINE_BASE 0 +#define MT2_EAPPacket 0 +#define MT2_EAPOLStart 1 +#define MT2_EAPOLLogoff 2 +#define MT2_EAPOLKey 3 +#define MT2_EAPOLASFAlert 4 +#define MAX_WPA_MSG 5 -#define AP_WPA_FUNC_SIZE (AP_MAX_WPA_PTK_STATE * AP_MAX_WPA_MSG) +#define WPA_FUNC_SIZE (MAX_WPA_PTK_STATE * MAX_WPA_MSG) -// ============================================================================= +/* ============================================================================= */ -// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header +/* value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header */ #define BTYPE_MGMT 0 #define BTYPE_CNTL 1 #define BTYPE_DATA 2 -// value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header +/* value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */ #define SUBTYPE_ASSOC_REQ 0 #define SUBTYPE_ASSOC_RSP 1 #define SUBTYPE_REASSOC_REQ 2 @@ -956,7 +912,7 @@ #define SUBTYPE_ACTION 13 #define SUBTYPE_ACTION_NO_ACK 14 -// value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header +/* value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */ #define SUBTYPE_WRAPPER 7 #define SUBTYPE_BLOCK_ACK_REQ 8 #define SUBTYPE_BLOCK_ACK 9 @@ -967,7 +923,7 @@ #define SUBTYPE_CFEND 14 #define SUBTYPE_CFEND_CFACK 15 -// value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header +/* value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */ #define SUBTYPE_DATA 0 #define SUBTYPE_DATA_CFACK 1 #define SUBTYPE_DATA_CFPOLL 2 @@ -985,15 +941,15 @@ #define SUBTYPE_QOS_CFPOLL 14 #define SUBTYPE_QOS_CFACK_CFPOLL 15 -// ACK policy of QOS Control field bit 6:5 -#define NORMAL_ACK 0x00 // b6:5 = 00 -#define NO_ACK 0x20 // b6:5 = 01 -#define NO_EXPLICIT_ACK 0x40 // b6:5 = 10 -#define BLOCK_ACK 0x60 // b6:5 = 11 +/* ACK policy of QOS Control field bit 6:5 */ +#define NORMAL_ACK 0x00 /* b6:5 = 00 */ +#define NO_ACK 0x20 /* b6:5 = 01 */ +#define NO_EXPLICIT_ACK 0x40 /* b6:5 = 10 */ +#define BLOCK_ACK 0x60 /* b6:5 = 11 */ -// -// rtmp_data.c use these definition -// +/* */ +/* rtmp_data.c use these definition */ +/* */ #define LENGTH_802_11 24 #define LENGTH_802_11_AND_H 30 #define LENGTH_802_11_CRC_H 34 @@ -1007,42 +963,42 @@ #define LENGTH_CRC 4 #define MAX_SEQ_NUMBER 0x0fff #define LENGTH_802_3_NO_TYPE 12 -#define LENGTH_802_1Q 4 /* VLAN related */ +#define LENGTH_802_1Q 4 /* VLAN related */ -// STA_CSR4.field.TxResult +/* STA_CSR4.field.TxResult */ #define TX_RESULT_SUCCESS 0 #define TX_RESULT_ZERO_LENGTH 1 #define TX_RESULT_UNDER_RUN 2 #define TX_RESULT_OHY_ERROR 4 #define TX_RESULT_RETRY_FAIL 6 -// All PHY rate summary in TXD -// Preamble MODE in TxD +/* All PHY rate summary in TXD */ +/* Preamble MODE in TxD */ #define MODE_CCK 0 #define MODE_OFDM 1 #define MODE_HTMIX 2 #define MODE_HTGREENFIELD 3 -// MCS for CCK. BW.SGI.STBC are reserved -#define MCS_LONGP_RATE_1 0 // long preamble CCK 1Mbps -#define MCS_LONGP_RATE_2 1 // long preamble CCK 1Mbps -#define MCS_LONGP_RATE_5_5 2 -#define MCS_LONGP_RATE_11 3 -#define MCS_SHORTP_RATE_1 4 // long preamble CCK 1Mbps. short is forbidden in 1Mbps -#define MCS_SHORTP_RATE_2 5 // short preamble CCK 2Mbps +/* MCS for CCK. BW.SGI.STBC are reserved */ +#define MCS_longP_RATE_1 0 /* long preamble CCK 1Mbps */ +#define MCS_longP_RATE_2 1 /* long preamble CCK 1Mbps */ +#define MCS_longP_RATE_5_5 2 +#define MCS_longP_RATE_11 3 +#define MCS_SHORTP_RATE_1 4 /* long preamble CCK 1Mbps. short is forbidden in 1Mbps */ +#define MCS_SHORTP_RATE_2 5 /* short preamble CCK 2Mbps */ #define MCS_SHORTP_RATE_5_5 6 #define MCS_SHORTP_RATE_11 7 -// To send duplicate legacy OFDM. set BW=BW_40. SGI.STBC are reserved -#define MCS_RATE_6 0 // legacy OFDM -#define MCS_RATE_9 1 // OFDM -#define MCS_RATE_12 2 // OFDM -#define MCS_RATE_18 3 // OFDM -#define MCS_RATE_24 4 // OFDM -#define MCS_RATE_36 5 // OFDM -#define MCS_RATE_48 6 // OFDM -#define MCS_RATE_54 7 // OFDM -// HT -#define MCS_0 0 // 1S +/* To send duplicate legacy OFDM. set BW=BW_40. SGI.STBC are reserved */ +#define MCS_RATE_6 0 /* legacy OFDM */ +#define MCS_RATE_9 1 /* OFDM */ +#define MCS_RATE_12 2 /* OFDM */ +#define MCS_RATE_18 3 /* OFDM */ +#define MCS_RATE_24 4 /* OFDM */ +#define MCS_RATE_36 5 /* OFDM */ +#define MCS_RATE_48 6 /* OFDM */ +#define MCS_RATE_54 7 /* OFDM */ +/* HT */ +#define MCS_0 0 /* 1S */ #define MCS_1 1 #define MCS_2 2 #define MCS_3 3 @@ -1050,7 +1006,7 @@ #define MCS_5 5 #define MCS_6 6 #define MCS_7 7 -#define MCS_8 8 // 2S +#define MCS_8 8 /* 2S */ #define MCS_9 9 #define MCS_10 10 #define MCS_11 11 @@ -1058,7 +1014,7 @@ #define MCS_13 13 #define MCS_14 14 #define MCS_15 15 -#define MCS_16 16 // 3*3 +#define MCS_16 16 /* 3*3 */ #define MCS_17 17 #define MCS_18 18 #define MCS_19 19 @@ -1069,49 +1025,48 @@ #define MCS_32 32 #define MCS_AUTO 33 -// OID_HTPHYMODE -// MODE +/* OID_HTPHYMODE */ +/* MODE */ #define HTMODE_MM 0 #define HTMODE_GF 1 -// Fixed Tx MODE - HT, CCK or OFDM +/* Fixed Tx MODE - HT, CCK or OFDM */ #define FIXED_TXMODE_HT 0 #define FIXED_TXMODE_CCK 1 #define FIXED_TXMODE_OFDM 2 -// BW +/* BW */ #define BW_20 BAND_WIDTH_20 #define BW_40 BAND_WIDTH_40 #define BW_BOTH BAND_WIDTH_BOTH -#define BW_10 BAND_WIDTH_10 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field. +#define BW_10 BAND_WIDTH_10 /* 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field. */ -// SHORTGI -#define GI_400 GAP_INTERVAL_400 // only support in HT mode +/* SHORTGI */ +#define GI_400 GAP_INTERVAL_400 /* only support in HT mode */ #define GI_BOTH GAP_INTERVAL_BOTH #define GI_800 GAP_INTERVAL_800 -// STBC +/* STBC */ #define STBC_NONE 0 -#define STBC_USE 1 // limited use in rt2860b phy -#define RXSTBC_ONE 1 // rx support of one spatial stream -#define RXSTBC_TWO 2 // rx support of 1 and 2 spatial stream -#define RXSTBC_THR 3 // rx support of 1~3 spatial stream -// MCS FEEDBACK -#define MCSFBK_NONE 0 // not support mcs feedback / -#define MCSFBK_RSV 1 // reserved -#define MCSFBK_UNSOLICIT 2 // only support unsolict mcs feedback -#define MCSFBK_MRQ 3 // response to both MRQ and unsolict mcs feedback - -// MIMO power safe +#define STBC_USE 1 /* limited use in rt2860b phy */ +#define RXSTBC_ONE 1 /* rx support of one spatial stream */ +#define RXSTBC_TWO 2 /* rx support of 1 and 2 spatial stream */ +#define RXSTBC_THR 3 /* rx support of 1~3 spatial stream */ +/* MCS FEEDBACK */ +#define MCSFBK_NONE 0 /* not support mcs feedback / */ +#define MCSFBK_RSV 1 /* reserved */ +#define MCSFBK_UNSOLICIT 2 /* only support unsolict mcs feedback */ +#define MCSFBK_MRQ 3 /* response to both MRQ and unsolict mcs feedback */ + +/* MIMO power safe */ #define MMPS_STATIC 0 #define MMPS_DYNAMIC 1 #define MMPS_RSV 2 #define MMPS_ENABLE 3 - -// A-MSDU size +/* A-MSDU size */ #define AMSDU_0 0 #define AMSDU_1 1 -// MCS use 7 bits +/* MCS use 7 bits */ #define TXRATEMIMO 0x80 #define TXRATEMCS 0x7F #define TXRATEOFDM 0x7F @@ -1119,73 +1074,77 @@ #define RATE_2 1 #define RATE_5_5 2 #define RATE_11 3 -#define RATE_6 4 // OFDM -#define RATE_9 5 // OFDM -#define RATE_12 6 // OFDM -#define RATE_18 7 // OFDM -#define RATE_24 8 // OFDM -#define RATE_36 9 // OFDM -#define RATE_48 10 // OFDM -#define RATE_54 11 // OFDM +#define RATE_6 4 /* OFDM */ +#define RATE_9 5 /* OFDM */ +#define RATE_12 6 /* OFDM */ +#define RATE_18 7 /* OFDM */ +#define RATE_24 8 /* OFDM */ +#define RATE_36 9 /* OFDM */ +#define RATE_48 10 /* OFDM */ +#define RATE_54 11 /* OFDM */ #define RATE_FIRST_OFDM_RATE RATE_6 #define RATE_LAST_OFDM_RATE RATE_54 -#define RATE_6_5 12 // HT mix -#define RATE_13 13 // HT mix -#define RATE_19_5 14 // HT mix -#define RATE_26 15 // HT mix -#define RATE_39 16 // HT mix -#define RATE_52 17 // HT mix -#define RATE_58_5 18 // HT mix -#define RATE_65 19 // HT mix -#define RATE_78 20 // HT mix -#define RATE_104 21 // HT mix -#define RATE_117 22 // HT mix -#define RATE_130 23 // HT mix -//#define RATE_AUTO_SWITCH 255 // for StaCfg.FixedTxRate only +#define RATE_6_5 12 /* HT mix */ +#define RATE_13 13 /* HT mix */ +#define RATE_19_5 14 /* HT mix */ +#define RATE_26 15 /* HT mix */ +#define RATE_39 16 /* HT mix */ +#define RATE_52 17 /* HT mix */ +#define RATE_58_5 18 /* HT mix */ +#define RATE_65 19 /* HT mix */ +#define RATE_78 20 /* HT mix */ +#define RATE_104 21 /* HT mix */ +#define RATE_117 22 /* HT mix */ +#define RATE_130 23 /* HT mix */ +/*#define RATE_AUTO_SWITCH 255 // for StaCfg.FixedTxRate only */ #define HTRATE_0 12 #define RATE_FIRST_MM_RATE HTRATE_0 #define RATE_FIRST_HT_RATE HTRATE_0 #define RATE_LAST_HT_RATE HTRATE_0 -// pTxWI->txop -#define IFS_HTTXOP 0 // The txop will be handles by ASIC. +/* pTxWI->txop */ +#define IFS_HTTXOP 0 /* The txop will be handles by ASIC. */ #define IFS_PIFS 1 #define IFS_SIFS 2 #define IFS_BACKOFF 3 -// pTxD->RetryMode -#define LONG_RETRY 1 +/* pTxD->RetryMode */ +#define long_RETRY 1 #define SHORT_RETRY 0 -// Country Region definition +/* Country Region definition */ #define REGION_MINIMUM_BG_BAND 0 -#define REGION_0_BG_BAND 0 // 1-11 -#define REGION_1_BG_BAND 1 // 1-13 -#define REGION_2_BG_BAND 2 // 10-11 -#define REGION_3_BG_BAND 3 // 10-13 -#define REGION_4_BG_BAND 4 // 14 -#define REGION_5_BG_BAND 5 // 1-14 -#define REGION_6_BG_BAND 6 // 3-9 -#define REGION_7_BG_BAND 7 // 5-13 -#define REGION_31_BG_BAND 31 // 5-13 +#define REGION_0_BG_BAND 0 /* 1-11 */ +#define REGION_1_BG_BAND 1 /* 1-13 */ +#define REGION_2_BG_BAND 2 /* 10-11 */ +#define REGION_3_BG_BAND 3 /* 10-13 */ +#define REGION_4_BG_BAND 4 /* 14 */ +#define REGION_5_BG_BAND 5 /* 1-14 */ +#define REGION_6_BG_BAND 6 /* 3-9 */ +#define REGION_7_BG_BAND 7 /* 5-13 */ +#define REGION_31_BG_BAND 31 /* 5-13 */ #define REGION_MAXIMUM_BG_BAND 7 #define REGION_MINIMUM_A_BAND 0 -#define REGION_0_A_BAND 0 // 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 -#define REGION_1_A_BAND 1 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 -#define REGION_2_A_BAND 2 // 36, 40, 44, 48, 52, 56, 60, 64 -#define REGION_3_A_BAND 3 // 52, 56, 60, 64, 149, 153, 157, 161 -#define REGION_4_A_BAND 4 // 149, 153, 157, 161, 165 -#define REGION_5_A_BAND 5 // 149, 153, 157, 161 -#define REGION_6_A_BAND 6 // 36, 40, 44, 48 -#define REGION_7_A_BAND 7 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 -#define REGION_8_A_BAND 8 // 52, 56, 60, 64 -#define REGION_9_A_BAND 9 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 -#define REGION_10_A_BAND 10 // 36, 40, 44, 48, 149, 153, 157, 161, 165 -#define REGION_11_A_BAND 11 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 -#define REGION_MAXIMUM_A_BAND 11 - -// pTxD->CipherAlg +#define REGION_0_A_BAND 0 /* 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 */ +#define REGION_1_A_BAND 1 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 */ +#define REGION_2_A_BAND 2 /* 36, 40, 44, 48, 52, 56, 60, 64 */ +#define REGION_3_A_BAND 3 /* 52, 56, 60, 64, 149, 153, 157, 161 */ +#define REGION_4_A_BAND 4 /* 149, 153, 157, 161, 165 */ +#define REGION_5_A_BAND 5 /* 149, 153, 157, 161 */ +#define REGION_6_A_BAND 6 /* 36, 40, 44, 48 */ +#define REGION_7_A_BAND 7 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165, 169, 173 */ +#define REGION_8_A_BAND 8 /* 52, 56, 60, 64 */ +#define REGION_9_A_BAND 9 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 */ +#define REGION_10_A_BAND 10 /* 36, 40, 44, 48, 149, 153, 157, 161, 165 */ +#define REGION_11_A_BAND 11 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 */ +#define REGION_12_A_BAND 12 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 */ +#define REGION_13_A_BAND 13 /* 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161 */ +#define REGION_14_A_BAND 14 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165 */ +#define REGION_15_A_BAND 15 /* 149, 153, 157, 161, 165, 169, 173 */ +#define REGION_MAXIMUM_A_BAND 15 + +/* pTxD->CipherAlg */ #define CIPHER_NONE 0 #define CIPHER_WEP64 1 #define CIPHER_WEP128 2 @@ -1193,20 +1152,10 @@ #define CIPHER_AES 4 #define CIPHER_CKIP64 5 #define CIPHER_CKIP128 6 -#define CIPHER_TKIP_NO_MIC 7 // MIC appended by driver: not a valid value in hardware key table +#define CIPHER_TKIP_NO_MIC 7 /* MIC appended by driver: not a valid value in hardware key table */ #define CIPHER_SMS4 8 -// value domain of pAd->RfIcType -#define RFIC_2820 1 // 2.4G 2T3R -#define RFIC_2850 2 // 2.4G/5G 2T3R -#define RFIC_2720 3 // 2.4G 1T2R -#define RFIC_2750 4 // 2.4G/5G 1T2R -#define RFIC_3020 5 // 2.4G 1T1R -#define RFIC_2020 6 // 2.4G B/G -#define RFIC_3021 7 // 2.4G 1T2R -#define RFIC_3022 8 // 2.4G 2T2R - -// LED Status. +/* LED Status. */ #define LED_LINK_DOWN 0 #define LED_LINK_UP 1 #define LED_RADIO_OFF 2 @@ -1216,35 +1165,35 @@ #define LED_ON_SITE_SURVEY 6 #define LED_POWER_UP 7 -// value domain of pAd->LedCntl.LedMode and E2PROM +/* value domain of pAd->LedCntl.LedMode and E2PROM */ #define LED_MODE_DEFAULT 0 #define LED_MODE_TWO_LED 1 -#define LED_MODE_SIGNAL_STREGTH 8 // EEPROM define =8 +/*#define LED_MODE_SIGNAL_STREGTH 8 // EEPROM define =8 */ +#define LED_MODE_SIGNAL_STREGTH 0x40 /* EEPROM define = 64 */ -// RC4 init value, used fro WEP & TKIP -#define PPPINITFCS32 0xffffffff /* Initial FCS value */ +/* RC4 init value, used fro WEP & TKIP */ +#define PPPINITFCS32 0xffffffff /* Initial FCS value */ -// value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition +/* value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition */ #define WPA_802_1X_PORT_SECURED 1 #define WPA_802_1X_PORT_NOT_SECURED 2 #define PAIRWISE_KEY 1 #define GROUP_KEY 2 -//definition of DRS +/*definition of DRS */ #define MAX_STEP_OF_TX_RATE_SWITCH 32 - -// pre-allocated free NDIS PACKET/BUFFER poll for internal usage +/* pre-allocated free NDIS PACKET/BUFFER poll for internal usage */ #define MAX_NUM_OF_FREE_NDIS_PACKET 128 -//Block ACK +/*Block ACK */ #define MAX_TX_REORDERBUF 64 #define MAX_RX_REORDERBUF 64 #define DEFAULT_TX_TIMEOUT 30 #define DEFAULT_RX_TIMEOUT 30 -// definition of Recipient or Originator +/* definition of Recipient or Originator */ #define I_RECIPIENT TRUE #define I_ORIGINATOR FALSE @@ -1252,46 +1201,45 @@ #define DEFAULT_RF_TX_POWER 5 #define MAX_INI_BUFFER_SIZE 4096 -#define MAX_PARAM_BUFFER_SIZE (2048) // enough for ACL (18*64) - //18 : the length of Mac address acceptable format "01:02:03:04:05:06;") - //64 : MAX_NUM_OF_ACL_LIST -// definition of pAd->OpMode +#define MAX_PARAM_BUFFER_SIZE (2048) /* enough for ACL (18*64) */ + /*18 : the length of Mac address acceptable format "01:02:03:04:05:06;") */ + /*64 : MAX_NUM_OF_ACL_LIST */ +/* definition of pAd->OpMode */ #define OPMODE_STA 0 #define OPMODE_AP 1 -//#define OPMODE_L3_BRG 2 // as AP and STA at the same time - -// ========================= AP rtmp_def.h =========================== -// value domain for pAd->EventTab.Log[].Event -#define EVENT_RESET_ACCESS_POINT 0 // Log = "hh:mm:ss Restart Access Point" -#define EVENT_ASSOCIATED 1 // Log = "hh:mm:ss STA 00:01:02:03:04:05 associated" -#define EVENT_DISASSOCIATED 2 // Log = "hh:mm:ss STA 00:01:02:03:04:05 left this BSS" -#define EVENT_AGED_OUT 3 // Log = "hh:mm:ss STA 00:01:02:03:04:05 was aged-out and removed from this BSS" +/*#define OPMODE_L3_BRG 2 // as AP and STA at the same time */ + +/* ========================= AP rtmp_def.h =========================== */ +/* value domain for pAd->EventTab.Log[].Event */ +#define EVENT_RESET_ACCESS_POint 0 /* Log = "hh:mm:ss Restart Access Point" */ +#define EVENT_ASSOCIATED 1 /* Log = "hh:mm:ss STA 00:01:02:03:04:05 associated" */ +#define EVENT_DISASSOCIATED 2 /* Log = "hh:mm:ss STA 00:01:02:03:04:05 left this BSS" */ +#define EVENT_AGED_OUT 3 /* Log = "hh:mm:ss STA 00:01:02:03:04:05 was aged-out and removed from this BSS" */ #define EVENT_COUNTER_M 4 #define EVENT_INVALID_PSK 5 #define EVENT_MAX_EVENT_TYPE 6 -// ==== end of AP rtmp_def.h ============ +/* ==== end of AP rtmp_def.h ============ */ -// definition RSSI Number +/* definition RSSI Number */ #define RSSI_0 0 #define RSSI_1 1 #define RSSI_2 2 -// definition of radar detection -#define RD_NORMAL_MODE 0 // Not found radar signal -#define RD_SWITCHING_MODE 1 // Found radar signal, and doing channel switch -#define RD_SILENCE_MODE 2 // After channel switch, need to be silence a while to ensure radar not found +/* definition of radar detection */ +#define RD_NORMAL_MODE 0 /* Not found radar signal */ +#define RD_SWITCHING_MODE 1 /* Found radar signal, and doing channel switch */ +#define RD_SILENCE_MODE 2 /* After channel switch, need to be silence a while to ensure radar not found */ -//Driver defined cid for mapping status and command. +/*Driver defined cid for mapping status and command. */ #define SLEEPCID 0x11 #define WAKECID 0x22 #define QUERYPOWERCID 0x33 #define OWNERMCU 0x1 #define OWNERCPU 0x0 -// MBSSID definition +/* MBSSID definition */ #define ENTRY_NOT_FOUND 0xFF - /* After Linux 2.6.9, * VLAN module use Private (from user) interface flags (netdevice->priv_flags). * #define IFF_802_1Q_VLAN 0x1 -- 802.1Q VLAN device. in if.h @@ -1305,19 +1253,21 @@ #define INT_APCLI 0x0400 #define INT_MESH 0x0500 -// Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode) +#define INF_MAIN_DEV_NAME "wlan" +#define INF_MBSSID_DEV_NAME "ra" +#define INF_WDS_DEV_NAME "wds" +#define INF_APCLI_DEV_NAME "apcli" +#define INF_MESH_DEV_NAME "mesh" -// WEP Key TYPE +/* WEP Key TYPE */ #define WEP_HEXADECIMAL_TYPE 0 #define WEP_ASCII_TYPE 1 - - -// WIRELESS EVENTS definition +/* WIRELESS EVENTS definition */ /* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */ #define IW_CUSTOM_MAX_LEN 255 /* In bytes */ -// For system event - start +/* For system event - start */ #define IW_SYS_EVENT_FLAG_START 0x0200 #define IW_ASSOC_EVENT_FLAG 0x0200 #define IW_DISASSOC_EVENT_FLAG 0x0201 @@ -1338,12 +1288,12 @@ #define IW_STA_LINKDOWN_EVENT_FLAG 0x0210 #define IW_SCAN_COMPLETED_EVENT_FLAG 0x0211 #define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG 0x0212 -// if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END +/* if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END */ #define IW_SYS_EVENT_FLAG_END 0x0212 #define IW_SYS_EVENT_TYPE_NUM (IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1) -// For system event - end +/* For system event - end */ -// For spoof attack event - start +/* For spoof attack event - start */ #define IW_SPOOF_EVENT_FLAG_START 0x0300 #define IW_CONFLICT_SSID_EVENT_FLAG 0x0300 #define IW_SPOOF_ASSOC_RESP_EVENT_FLAG 0x0301 @@ -1355,12 +1305,12 @@ #define IW_SPOOF_DEAUTH_EVENT_FLAG 0x0307 #define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG 0x0308 #define IW_REPLAY_ATTACK_EVENT_FLAG 0x0309 -// if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END +/* if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END */ #define IW_SPOOF_EVENT_FLAG_END 0x0309 #define IW_SPOOF_EVENT_TYPE_NUM (IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1) -// For spoof attack event - end +/* For spoof attack event - end */ -// For flooding attack event - start +/* For flooding attack event - start */ #define IW_FLOOD_EVENT_FLAG_START 0x0400 #define IW_FLOOD_AUTH_EVENT_FLAG 0x0400 #define IW_FLOOD_ASSOC_REQ_EVENT_FLAG 0x0401 @@ -1369,18 +1319,18 @@ #define IW_FLOOD_DISASSOC_EVENT_FLAG 0x0404 #define IW_FLOOD_DEAUTH_EVENT_FLAG 0x0405 #define IW_FLOOD_EAP_REQ_EVENT_FLAG 0x0406 -// if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END +/* if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END */ #define IW_FLOOD_EVENT_FLAG_END 0x0406 #define IW_FLOOD_EVENT_TYPE_NUM (IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1) -// For flooding attack - end +/* For flooding attack - end */ -// End - WIRELESS EVENTS definition +/* End - WIRELESS EVENTS definition */ -// definition for DLS, kathy +/* definition for DLS, kathy */ #define MAX_NUM_OF_INIT_DLS_ENTRY 1 #define MAX_NUM_OF_DLS_ENTRY MAX_NUMBER_OF_DLS_ENTRY -//Block ACK , rt2860, kathy +/*Block ACK, kathy */ #define MAX_TX_REORDERBUF 64 #define MAX_RX_REORDERBUF 64 #define DEFAULT_TX_TIMEOUT 30 @@ -1392,65 +1342,48 @@ #define IW_ESSID_MAX_SIZE 32 #endif -#ifdef MCAST_RATE_SPECIFIC -#define MCAST_DISABLE 0 -#define MCAST_CCK 1 -#define MCAST_OFDM 2 -#define MCAST_HTMIX 3 -#endif // MCAST_RATE_SPECIFIC // - -#ifdef RT2860 -// For AsicRadioOff/AsicRadioOn/AsicForceWakeup function -// This is to indicate from where to call this function. -#define DOT11POWERSAVE 0 // TO do .11 power save sleep -#define GUIRADIO_OFF 1 // To perform Radio OFf command from GUI -#define RTMP_HALT 2 // Called from Halt handler. -#define GUI_IDLE_POWER_SAVE 3 // Call to sleep before link up with AP -#define FROM_TX 4 // Force wake up from Tx packet. -#endif -#ifdef RT2870 -// For AsicRadioOff/AsicRadioOn function +/* For AsicRadioOff/AsicRadioOn function */ #define DOT11POWERSAVE 0 #define GUIRADIO_OFF 1 #define RTMP_HALT 2 #define GUI_IDLE_POWER_SAVE 3 -#endif +/* -- */ -// definition for WpaSupport flag +/* definition for WpaSupport flag */ #define WPA_SUPPLICANT_DISABLE 0 #define WPA_SUPPLICANT_ENABLE 1 #define WPA_SUPPLICANT_ENABLE_WITH_WEB_UI 2 -// Endian byte swapping codes +/* Endian byte swapping codes */ #define SWAP16(x) \ - ((UINT16)( \ - (((UINT16)(x) & (UINT16) 0x00ffU) << 8) | \ - (((UINT16)(x) & (UINT16) 0xff00U) >> 8) )) + ((u16)( \ + (((u16)(x) & (u16)0x00ffU) << 8) | \ + (((u16)(x) & (u16)0xff00U) >> 8) )) #define SWAP32(x) \ - ((UINT32)( \ - (((UINT32)(x) & (UINT32) 0x000000ffUL) << 24) | \ - (((UINT32)(x) & (UINT32) 0x0000ff00UL) << 8) | \ - (((UINT32)(x) & (UINT32) 0x00ff0000UL) >> 8) | \ - (((UINT32)(x) & (UINT32) 0xff000000UL) >> 24) )) + ((u32)( \ + (((u32)(x) & (u32)0x000000ffUL) << 24) | \ + (((u32)(x) & (u32)0x0000ff00UL) << 8) | \ + (((u32)(x) & (u32)0x00ff0000UL) >> 8) | \ + (((u32)(x) & (u32)0xff000000UL) >> 24) )) #define SWAP64(x) \ - ((UINT64)( \ - (UINT64)(((UINT64)(x) & (UINT64) 0x00000000000000ffULL) << 56) | \ - (UINT64)(((UINT64)(x) & (UINT64) 0x000000000000ff00ULL) << 40) | \ - (UINT64)(((UINT64)(x) & (UINT64) 0x0000000000ff0000ULL) << 24) | \ - (UINT64)(((UINT64)(x) & (UINT64) 0x00000000ff000000ULL) << 8) | \ - (UINT64)(((UINT64)(x) & (UINT64) 0x000000ff00000000ULL) >> 8) | \ - (UINT64)(((UINT64)(x) & (UINT64) 0x0000ff0000000000ULL) >> 24) | \ - (UINT64)(((UINT64)(x) & (UINT64) 0x00ff000000000000ULL) >> 40) | \ - (UINT64)(((UINT64)(x) & (UINT64) 0xff00000000000000ULL) >> 56) )) - -#define cpu2le64(x) ((UINT64)(x)) -#define le2cpu64(x) ((UINT64)(x)) -#define cpu2le32(x) ((UINT32)(x)) -#define le2cpu32(x) ((UINT32)(x)) -#define cpu2le16(x) ((UINT16)(x)) -#define le2cpu16(x) ((UINT16)(x)) + ((u64)( \ + (u64)(((u64)(x) & (u64)0x00000000000000ffULL) << 56) | \ + (u64)(((u64)(x) & (u64)0x000000000000ff00ULL) << 40) | \ + (u64)(((u64)(x) & (u64)0x0000000000ff0000ULL) << 24) | \ + (u64)(((u64)(x) & (u64)0x00000000ff000000ULL) << 8) | \ + (u64)(((u64)(x) & (u64)0x000000ff00000000ULL) >> 8) | \ + (u64)(((u64)(x) & (u64)0x0000ff0000000000ULL) >> 24) | \ + (u64)(((u64)(x) & (u64)0x00ff000000000000ULL) >> 40) | \ + (u64)(((u64)(x) & (u64)0xff00000000000000ULL) >> 56) )) + +#define cpu2le64(x) ((u64)(x)) +#define le2cpu64(x) ((u64)(x)) +#define cpu2le32(x) ((u32)(x)) +#define le2cpu32(x) ((u32)(x)) +#define cpu2le16(x) ((u16)(x)) +#define le2cpu16(x) ((u16)(x)) #define cpu2be64(x) SWAP64((x)) #define be2cpu64(x) SWAP64((x)) #define cpu2be32(x) SWAP32((x)) @@ -1458,6 +1391,36 @@ #define cpu2be16(x) SWAP16((x)) #define be2cpu16(x) SWAP16((x)) -#endif // __RTMP_DEF_H__ - - +#define ABS(_x, _y) ((_x) > (_y)) ? ((_x) -(_y)) : ((_y) -(_x)) + +#define A2Dec(_X, _p) \ +{ \ + u8 *p; \ + _X = 0; \ + p = _p; \ + while (((*p >= '0') && (*p <= '9'))) \ + { \ + if ((*p >= '0') && (*p <= '9')) \ + _X = _X * 10 + *p - 48; \ + p++; \ + } \ +} + +#define A2Hex(_X, _p) \ +do{ \ + char *__p; \ + (_X) = 0; \ + __p = (char *)(_p); \ + while (((*__p >= 'a') && (*__p <= 'f')) || ((*__p >= 'A') && (*__p <= 'F')) || ((*__p >= '0') && (*__p <= '9'))) \ + { \ + if ((*__p >= 'a') && (*__p <= 'f')) \ + (_X) = (_X) * 16 + *__p - 87; \ + else if ((*__p >= 'A') && (*__p <= 'F')) \ + (_X) = (_X) * 16 + *__p - 55; \ + else if ((*__p >= '0') && (*__p <= '9')) \ + (_X) = (_X) * 16 + *__p - 48; \ + __p++; \ + } \ +}while(0) + +#endif /* __RTMP_DEF_H__ */ |