diff options
Diffstat (limited to 'drivers/staging/rt2870/common/cmm_info.c')
| -rw-r--r-- | drivers/staging/rt2870/common/cmm_info.c | 3712 |
1 files changed, 3712 insertions, 0 deletions
diff --git a/drivers/staging/rt2870/common/cmm_info.c b/drivers/staging/rt2870/common/cmm_info.c new file mode 100644 index 000000000000..47a1b1a73f09 --- /dev/null +++ b/drivers/staging/rt2870/common/cmm_info.c @@ -0,0 +1,3712 @@ +/* + ************************************************************************* + * Ralink Tech Inc. + * 5F., No.36, Taiyuan St., Jhubei City, + * Hsinchu County 302, + * Taiwan, R.O.C. + * + * (c) Copyright 2002-2007, Ralink Technology, Inc. + * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + ************************************************************************* +*/ + +#include "../rt_config.h" + +INT Show_SSID_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_WirelessMode_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_TxBurst_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_TxPreamble_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_TxPower_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_Channel_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_BGProtection_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_RTSThreshold_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_FragThreshold_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +#ifdef DOT11_N_SUPPORT +INT Show_HtBw_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_HtMcs_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_HtGi_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_HtOpMode_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_HtExtcha_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_HtMpduDensity_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_HtBaWinSize_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_HtRdg_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_HtAmsdu_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_HtAutoBa_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); +#endif // DOT11_N_SUPPORT // + +INT Show_CountryRegion_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_CountryRegionABand_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_CountryCode_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +#ifdef AGGREGATION_SUPPORT +INT Show_PktAggregate_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); +#endif // AGGREGATION_SUPPORT // + +#ifdef WMM_SUPPORT +INT Show_WmmCapable_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); +#endif // WMM_SUPPORT // + +INT Show_IEEE80211H_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +#ifdef CONFIG_STA_SUPPORT +INT Show_NetworkType_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); +#endif // CONFIG_STA_SUPPORT // + +INT Show_AuthMode_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_EncrypType_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_DefaultKeyID_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_Key1_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_Key2_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_Key3_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_Key4_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +INT Show_WPAPSK_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf); + +static struct { + CHAR *name; + INT (*show_proc)(PRTMP_ADAPTER pAdapter, PUCHAR arg); +} *PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC, RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC[] = { + {"SSID", Show_SSID_Proc}, + {"WirelessMode", Show_WirelessMode_Proc}, + {"TxBurst", Show_TxBurst_Proc}, + {"TxPreamble", Show_TxPreamble_Proc}, + {"TxPower", Show_TxPower_Proc}, + {"Channel", Show_Channel_Proc}, + {"BGProtection", Show_BGProtection_Proc}, + {"RTSThreshold", Show_RTSThreshold_Proc}, + {"FragThreshold", Show_FragThreshold_Proc}, +#ifdef DOT11_N_SUPPORT + {"HtBw", Show_HtBw_Proc}, + {"HtMcs", Show_HtMcs_Proc}, + {"HtGi", Show_HtGi_Proc}, + {"HtOpMode", Show_HtOpMode_Proc}, + {"HtExtcha", Show_HtExtcha_Proc}, + {"HtMpduDensity", Show_HtMpduDensity_Proc}, + {"HtBaWinSize", Show_HtBaWinSize_Proc}, + {"HtRdg", Show_HtRdg_Proc}, + {"HtAmsdu", Show_HtAmsdu_Proc}, + {"HtAutoBa", Show_HtAutoBa_Proc}, +#endif // DOT11_N_SUPPORT // + {"CountryRegion", Show_CountryRegion_Proc}, + {"CountryRegionABand", Show_CountryRegionABand_Proc}, + {"CountryCode", Show_CountryCode_Proc}, +#ifdef AGGREGATION_SUPPORT + {"PktAggregate", Show_PktAggregate_Proc}, +#endif + +#ifdef WMM_SUPPORT + {"WmmCapable", Show_WmmCapable_Proc}, +#endif + {"IEEE80211H", Show_IEEE80211H_Proc}, +#ifdef CONFIG_STA_SUPPORT + {"NetworkType", Show_NetworkType_Proc}, +#endif // CONFIG_STA_SUPPORT // + {"AuthMode", Show_AuthMode_Proc}, + {"EncrypType", Show_EncrypType_Proc}, + {"DefaultKeyID", Show_DefaultKeyID_Proc}, + {"Key1", Show_Key1_Proc}, + {"Key2", Show_Key2_Proc}, + {"Key3", Show_Key3_Proc}, + {"Key4", Show_Key4_Proc}, + {"WPAPSK", Show_WPAPSK_Proc}, + {NULL, NULL} +}; + +/* + ========================================================================== + Description: + Get Driver version. + + Return: + ========================================================================== +*/ +INT Set_DriverVersion_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION)); +#endif // CONFIG_STA_SUPPORT // + + return TRUE; +} + +/* + ========================================================================== + Description: + Set Country Region. + This command will not work, if the field of CountryRegion in eeprom is programmed. + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_CountryRegion_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG region; + + region = simple_strtol(arg, 0, 10); + +#ifdef EXT_BUILD_CHANNEL_LIST + return -EOPNOTSUPP; +#endif // EXT_BUILD_CHANNEL_LIST // + + // Country can be set only when EEPROM not programmed + if (pAd->CommonCfg.CountryRegion & 0x80) + { + DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegion_Proc::parameter of CountryRegion in eeprom is programmed \n")); + return FALSE; + } + + if((region >= 0) && (region <= REGION_MAXIMUM_BG_BAND)) + { + pAd->CommonCfg.CountryRegion = (UCHAR) region; + } + else if (region == REGION_31_BG_BAND) + { + pAd->CommonCfg.CountryRegion = (UCHAR) region; + } + else + { + DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegion_Proc::parameters out of range\n")); + return FALSE; + } + + // if set country region, driver needs to be reset + BuildChannelList(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_CountryRegion_Proc::(CountryRegion=%d)\n", pAd->CommonCfg.CountryRegion)); + + return TRUE; +} + +/* + ========================================================================== + Description: + Set Country Region for A band. + This command will not work, if the field of CountryRegion in eeprom is programmed. + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_CountryRegionABand_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG region; + + region = simple_strtol(arg, 0, 10); + +#ifdef EXT_BUILD_CHANNEL_LIST + return -EOPNOTSUPP; +#endif // EXT_BUILD_CHANNEL_LIST // + + // Country can be set only when EEPROM not programmed + if (pAd->CommonCfg.CountryRegionForABand & 0x80) + { + DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegionABand_Proc::parameter of CountryRegion in eeprom is programmed \n")); + return FALSE; + } + + if((region >= 0) && (region <= REGION_MAXIMUM_A_BAND)) + { + pAd->CommonCfg.CountryRegionForABand = (UCHAR) region; + } + else + { + DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegionABand_Proc::parameters out of range\n")); + return FALSE; + } + + // if set country region, driver needs to be reset + BuildChannelList(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_CountryRegionABand_Proc::(CountryRegion=%d)\n", pAd->CommonCfg.CountryRegionForABand)); + + return TRUE; +} + +/* + ========================================================================== + Description: + Set Wireless Mode + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_WirelessMode_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG WirelessMode; + INT success = TRUE; + + WirelessMode = simple_strtol(arg, 0, 10); + + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { + INT MaxPhyMode = PHY_11G; + +#ifdef DOT11_N_SUPPORT + MaxPhyMode = PHY_11N_5G; +#endif // DOT11_N_SUPPORT // + + if (WirelessMode <= MaxPhyMode) + { + RTMPSetPhyMode(pAd, WirelessMode); +#ifdef DOT11_N_SUPPORT + if (WirelessMode >= PHY_11ABGN_MIXED) + { + pAd->CommonCfg.BACapability.field.AutoBA = TRUE; + pAd->CommonCfg.REGBACapability.field.AutoBA = TRUE; + } + else + { + pAd->CommonCfg.BACapability.field.AutoBA = FALSE; + pAd->CommonCfg.REGBACapability.field.AutoBA = FALSE; + } +#endif // DOT11_N_SUPPORT // + // Set AdhocMode rates + if (pAd->StaCfg.BssType == BSS_ADHOC) + { + MlmeUpdateTxRates(pAd, FALSE, 0); + MakeIbssBeacon(pAd); // re-build BEACON frame + AsicEnableIbssSync(pAd); // copy to on-chip memory + } + } + else + { + success = FALSE; + } + } +#endif // CONFIG_STA_SUPPORT // + + // it is needed to set SSID to take effect + if (success == TRUE) + { +#ifdef DOT11_N_SUPPORT + SetCommonHT(pAd); +#endif // DOT11_N_SUPPORT // + DBGPRINT(RT_DEBUG_TRACE, ("Set_WirelessMode_Proc::(=%ld)\n", WirelessMode)); + } + else + { + DBGPRINT(RT_DEBUG_ERROR, ("Set_WirelessMode_Proc::parameters out of range\n")); + } + + return success; +} + +/* + ========================================================================== + Description: + Set Channel + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_Channel_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + INT success = TRUE; + UCHAR Channel; + + Channel = (UCHAR) simple_strtol(arg, 0, 10); + + // check if this channel is valid + if (ChannelSanity(pAd, Channel) == TRUE) + { +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { + pAd->CommonCfg.Channel = Channel; + + if (MONITOR_ON(pAd)) + { +#ifdef DOT11_N_SUPPORT + N_ChannelCheck(pAd); + if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED && + pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40) + { + N_SetCenCh(pAd); + AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); + DBGPRINT(RT_DEBUG_TRACE, ("BW_40, control_channel(%d), CentralChannel(%d) \n", + pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel)); + } + else +#endif // DOT11_N_SUPPORT // + { + AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.Channel); + DBGPRINT(RT_DEBUG_TRACE, ("BW_20, Channel(%d)\n", pAd->CommonCfg.Channel)); + } + } + } +#endif // CONFIG_STA_SUPPORT // + success = TRUE; + } + else + { + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + success = FALSE; +#endif // CONFIG_STA_SUPPORT // + } + + + if (success == TRUE) + DBGPRINT(RT_DEBUG_TRACE, ("Set_Channel_Proc::(Channel=%d)\n", pAd->CommonCfg.Channel)); + + return success; +} + +/* + ========================================================================== + Description: + Set Short Slot Time Enable or Disable + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_ShortSlot_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG ShortSlot; + + ShortSlot = simple_strtol(arg, 0, 10); + + if (ShortSlot == 1) + pAd->CommonCfg.bUseShortSlotTime = TRUE; + else if (ShortSlot == 0) + pAd->CommonCfg.bUseShortSlotTime = FALSE; + else + return FALSE; //Invalid argument + + DBGPRINT(RT_DEBUG_TRACE, ("Set_ShortSlot_Proc::(ShortSlot=%d)\n", pAd->CommonCfg.bUseShortSlotTime)); + + return TRUE; +} + +/* + ========================================================================== + Description: + Set Tx power + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_TxPower_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG TxPower; + INT success = FALSE; + + TxPower = (ULONG) simple_strtol(arg, 0, 10); + if (TxPower <= 100) + { + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { + pAd->CommonCfg.TxPowerDefault = TxPower; + pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault; + } +#endif // CONFIG_STA_SUPPORT // + success = TRUE; + } + else + success = FALSE; + + DBGPRINT(RT_DEBUG_TRACE, ("Set_TxPower_Proc::(TxPowerPercentage=%ld)\n", pAd->CommonCfg.TxPowerPercentage)); + + return success; +} + +/* + ========================================================================== + Description: + Set 11B/11G Protection + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_BGProtection_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + switch (simple_strtol(arg, 0, 10)) + { + case 0: //AUTO + pAd->CommonCfg.UseBGProtection = 0; + break; + case 1: //Always On + pAd->CommonCfg.UseBGProtection = 1; + break; + case 2: //Always OFF + pAd->CommonCfg.UseBGProtection = 2; + break; + default: //Invalid argument + return FALSE; + } + + + DBGPRINT(RT_DEBUG_TRACE, ("Set_BGProtection_Proc::(BGProtection=%ld)\n", pAd->CommonCfg.UseBGProtection)); + + return TRUE; +} + +/* + ========================================================================== + Description: + Set TxPreamble + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_TxPreamble_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + RT_802_11_PREAMBLE Preamble; + + Preamble = simple_strtol(arg, 0, 10); + + + switch (Preamble) + { + case Rt802_11PreambleShort: + pAd->CommonCfg.TxPreamble = Preamble; +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + MlmeSetTxPreamble(pAd, Rt802_11PreambleShort); +#endif // CONFIG_STA_SUPPORT // + break; + case Rt802_11PreambleLong: +#ifdef CONFIG_STA_SUPPORT + case Rt802_11PreambleAuto: + // if user wants AUTO, initialize to LONG here, then change according to AP's + // capability upon association. +#endif // CONFIG_STA_SUPPORT // + pAd->CommonCfg.TxPreamble = Preamble; +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + MlmeSetTxPreamble(pAd, Rt802_11PreambleLong); +#endif // CONFIG_STA_SUPPORT // + break; + default: //Invalid argument + return FALSE; + } + + DBGPRINT(RT_DEBUG_TRACE, ("Set_TxPreamble_Proc::(TxPreamble=%ld)\n", pAd->CommonCfg.TxPreamble)); + + return TRUE; +} + +/* + ========================================================================== + Description: + Set RTS Threshold + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_RTSThreshold_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + NDIS_802_11_RTS_THRESHOLD RtsThresh; + + RtsThresh = simple_strtol(arg, 0, 10); + + if((RtsThresh > 0) && (RtsThresh <= MAX_RTS_THRESHOLD)) + pAd->CommonCfg.RtsThreshold = (USHORT)RtsThresh; +#ifdef CONFIG_STA_SUPPORT + else if (RtsThresh == 0) + pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD; +#endif // CONFIG_STA_SUPPORT // + else + return FALSE; //Invalid argument + + DBGPRINT(RT_DEBUG_TRACE, ("Set_RTSThreshold_Proc::(RTSThreshold=%d)\n", pAd->CommonCfg.RtsThreshold)); + + return TRUE; +} + +/* + ========================================================================== + Description: + Set Fragment Threshold + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_FragThreshold_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh; + + FragThresh = simple_strtol(arg, 0, 10); + + if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD) + { + //Illegal FragThresh so we set it to default + pAd->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD; + } + else if (FragThresh % 2 == 1) + { + // The length of each fragment shall always be an even number of octets, except for the last fragment + // of an MSDU or MMPDU, which may be either an even or an odd number of octets. + pAd->CommonCfg.FragmentThreshold = (USHORT)(FragThresh - 1); + } + else + { + pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh; + } + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { + if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD) + pAd->CommonCfg.bUseZeroToDisableFragment = TRUE; + else + pAd->CommonCfg.bUseZeroToDisableFragment = FALSE; + } +#endif // CONFIG_STA_SUPPORT // + + DBGPRINT(RT_DEBUG_TRACE, ("Set_FragThreshold_Proc::(FragThreshold=%d)\n", pAd->CommonCfg.FragmentThreshold)); + + return TRUE; +} + +/* + ========================================================================== + Description: + Set TxBurst + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_TxBurst_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG TxBurst; + + TxBurst = simple_strtol(arg, 0, 10); + if (TxBurst == 1) + pAd->CommonCfg.bEnableTxBurst = TRUE; + else if (TxBurst == 0) + pAd->CommonCfg.bEnableTxBurst = FALSE; + else + return FALSE; //Invalid argument + + DBGPRINT(RT_DEBUG_TRACE, ("Set_TxBurst_Proc::(TxBurst=%d)\n", pAd->CommonCfg.bEnableTxBurst)); + + return TRUE; +} + +#ifdef AGGREGATION_SUPPORT +/* + ========================================================================== + Description: + Set TxBurst + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_PktAggregate_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG aggre; + + aggre = simple_strtol(arg, 0, 10); + + if (aggre == 1) + pAd->CommonCfg.bAggregationCapable = TRUE; + else if (aggre == 0) + pAd->CommonCfg.bAggregationCapable = FALSE; + else + return FALSE; //Invalid argument + + + DBGPRINT(RT_DEBUG_TRACE, ("Set_PktAggregate_Proc::(AGGRE=%d)\n", pAd->CommonCfg.bAggregationCapable)); + + return TRUE; +} +#endif + +/* + ========================================================================== + Description: + Set IEEE80211H. + This parameter is 1 when needs radar detection, otherwise 0 + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_IEEE80211H_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG ieee80211h; + + ieee80211h = simple_strtol(arg, 0, 10); + + if (ieee80211h == 1) + pAd->CommonCfg.bIEEE80211H = TRUE; + else if (ieee80211h == 0) + pAd->CommonCfg.bIEEE80211H = FALSE; + else + return FALSE; //Invalid argument + + DBGPRINT(RT_DEBUG_TRACE, ("Set_IEEE80211H_Proc::(IEEE80211H=%d)\n", pAd->CommonCfg.bIEEE80211H)); + + return TRUE; +} + + +#ifdef DBG +/* + ========================================================================== + Description: + For Debug information + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_Debug_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + DBGPRINT(RT_DEBUG_TRACE, ("==> Set_Debug_Proc *******************\n")); + + if(simple_strtol(arg, 0, 10) <= RT_DEBUG_LOUD) + RTDebugLevel = simple_strtol(arg, 0, 10); + + DBGPRINT(RT_DEBUG_TRACE, ("<== Set_Debug_Proc(RTDebugLevel = %ld)\n", RTDebugLevel)); + + return TRUE; +} +#endif + +INT Show_DescInfo_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + + return TRUE; +} + +/* + ========================================================================== + Description: + Reset statistics counter + + Arguments: + pAdapter Pointer to our adapter + arg + + Return: + TRUE if all parameters are OK, FALSE otherwise + ========================================================================== +*/ +INT Set_ResetStatCounter_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + //UCHAR i; + //MAC_TABLE_ENTRY *pEntry; + + DBGPRINT(RT_DEBUG_TRACE, ("==>Set_ResetStatCounter_Proc\n")); + + // add the most up-to-date h/w raw counters into software counters + NICUpdateRawCounters(pAd); + + NdisZeroMemory(&pAd->WlanCounters, sizeof(COUNTER_802_11)); + NdisZeroMemory(&pAd->Counters8023, sizeof(COUNTER_802_3)); + NdisZeroMemory(&pAd->RalinkCounters, sizeof(COUNTER_RALINK)); + + // Reset HotSpot counter +#if 0 // ToDo. + for (i = 0; i < MAX_LEN_OF_MAC_TABLE; i++) + { + pEntry = &pAd->MacTab.Content[i]; + + if ((pEntry->Valid == FALSE) || (pEntry->Sst != SST_ASSOC)) + continue; + + pEntry->HSCounter.LastDataPacketTime = 0; + pEntry->HSCounter.TotalRxByteCount= 0; + pEntry->HSCounter.TotalTxByteCount= 0; + } +#endif + + + return TRUE; +} + +/* + ======================================================================== + + Routine Description: + Add WPA key process. + In Adhoc WPANONE, bPairwise = 0; KeyIdx = 0; + + Arguments: + pAd Pointer to our adapter + pBuf Pointer to the where the key stored + + Return Value: + NDIS_SUCCESS Add key successfully + + IRQL = DISPATCH_LEVEL + + Note: + + ======================================================================== +*/ +#if 0 // remove by AlbertY +NDIS_STATUS RTMPWPAAddKeyProc( + IN PRTMP_ADAPTER pAd, + IN PVOID pBuf) +{ + PNDIS_802_11_KEY pKey; + ULONG KeyIdx; +// NDIS_STATUS Status; +// ULONG offset; // unused variable, snowpin 2006.07.13 + + PUCHAR pTxMic, pRxMic; + BOOLEAN bTxKey; // Set the key as transmit key + BOOLEAN bPairwise; // Indicate the key is pairwise key + BOOLEAN bKeyRSC; // indicate the receive SC set by KeyRSC value. + // Otherwise, it will set by the NIC. + BOOLEAN bAuthenticator; // indicate key is set by authenticator. + UCHAR apidx = BSS0; + + pKey = (PNDIS_802_11_KEY) pBuf; + KeyIdx = pKey->KeyIndex & 0xff; + // Bit 31 of Add-key, Tx Key + bTxKey = (pKey->KeyIndex & 0x80000000) ? TRUE : FALSE; + // Bit 30 of Add-key PairwiseKey + bPairwise = (pKey->KeyIndex & 0x40000000) ? TRUE : FALSE; + // Bit 29 of Add-key KeyRSC + bKeyRSC = (pKey->KeyIndex & 0x20000000) ? TRUE : FALSE; + // Bit 28 of Add-key Authenticator + bAuthenticator = (pKey->KeyIndex & 0x10000000) ? TRUE : FALSE; + + DBGPRINT(RT_DEBUG_TRACE,("RTMPWPAAddKeyProc==>pKey->KeyIndex = %x. bPairwise= %d\n", pKey->KeyIndex, bPairwise)); + // 1. Check Group / Pairwise Key + if (bPairwise) // Pairwise Key + { + // 1. KeyIdx must be 0, otherwise, return NDIS_STATUS_INVALID_DATA + if (KeyIdx != 0) + return(NDIS_STATUS_INVALID_DATA); + + // 2. Check bTx, it must be true, otherwise, return NDIS_STATUS_INVALID_DATA + if (bTxKey == FALSE) + return(NDIS_STATUS_INVALID_DATA); + + // 3. If BSSID is all 0xff, return NDIS_STATUS_INVALID_DATA + if (MAC_ADDR_EQUAL(pKey->BSSID, BROADCAST_ADDR)) + return(NDIS_STATUS_INVALID_DATA); + + // 3.1 Check Pairwise key length for TKIP key. For AES, it's always 128 bits + //if ((pAdapter->PortCfg.WepStatus == Ndis802_11Encryption2Enabled) && (pKey->KeyLength != LEN_TKIP_KEY)) + if ((pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled) && (pKey->KeyLength != LEN_TKIP_KEY)) + return(NDIS_STATUS_INVALID_DATA); + + pAd->SharedKey[apidx][KeyIdx].Type = PAIRWISE_KEY; + + if (pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2) + { + // Send media specific event to start PMKID caching + RTMPIndicateWPA2Status(pAd); + } + } + else + { + // 1. Check BSSID, if not current BSSID or Bcast, return NDIS_STATUS_INVALID_DATA + if ((! MAC_ADDR_EQUAL(pKey->BSSID, BROADCAST_ADDR)) && + (! MAC_ADDR_EQUAL(pKey->BSSID, pAd->ApCfg.MBSSID[apidx].Bssid))) + return(NDIS_STATUS_INVALID_DATA); + + // 2. Check Key index for supported Group Key + if (KeyIdx >= GROUP_KEY_NUM) + return(NDIS_STATUS_INVALID_DATA); + + // 3. Set as default Tx Key if bTxKey is TRUE + if (bTxKey == TRUE) + pAd->ApCfg.MBSSID[apidx].DefaultKeyId = (UCHAR) KeyIdx; + + pAd->SharedKey[apidx][KeyIdx].Type = GROUP_KEY; + } + + // 4. Select RxMic / TxMic based on Supp / Authenticator + if (pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPANone) + { + // for WPA-None Tx, Rx MIC is the same + pTxMic = (PUCHAR) (&pKey->KeyMaterial) + 16; + pRxMic = pTxMic; + } + else if (bAuthenticator == TRUE) + { + pTxMic = (PUCHAR) (&pKey->KeyMaterial) + 16; + pRxMic = (PUCHAR) (&pKey->KeyMaterial) + 24; + } + else + { + pRxMic = (PUCHAR) (&pKey->KeyMaterial) + 16; + pTxMic = (PUCHAR) (&pKey->KeyMaterial) + 24; + } + + // 6. Check RxTsc + if (bKeyRSC == TRUE) + { + NdisMoveMemory(pAd->SharedKey[apidx][KeyIdx].RxTsc, &pKey->KeyRSC, 6); + NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].PairwiseKey.RxTsc, &pKey->KeyRSC, 6); + } + else + { + NdisZeroMemory(pAd->SharedKey[apidx][KeyIdx].RxTsc, 6); + } + + // 7. Copy information into Pairwise Key structure. + // pKey->KeyLength will include TxMic and RxMic, therefore, we use 16 bytes hardcoded. + pAd->SharedKey[apidx][KeyIdx].KeyLen = (UCHAR) pKey->KeyLength; + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.KeyLen = (UCHAR)pKey->KeyLength; + NdisMoveMemory(pAd->SharedKey[BSS0][KeyIdx].Key, &pKey->KeyMaterial, 16); + NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].PairwiseKey.Key, &pKey->KeyMaterial, 16); + if (pKey->KeyLength == LEN_TKIP_KEY) + { + // Only Key lenth equal to TKIP key have these + NdisMoveMemory(pAd->SharedKey[apidx][KeyIdx].RxMic, pRxMic, 8); + NdisMoveMemory(pAd->SharedKey[apidx][KeyIdx].TxMic, pTxMic, 8); + NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].PairwiseKey.RxMic, pRxMic, 8); + NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxMic, pTxMic, 8); + } + + COPY_MAC_ADDR(pAd->SharedKey[BSS0][KeyIdx].BssId, pKey->BSSID); + + // Init TxTsc to one based on WiFi WPA specs + pAd->SharedKey[apidx][KeyIdx].TxTsc[0] = 1; + pAd->SharedKey[apidx][KeyIdx].TxTsc[1] = 0; + pAd->SharedKey[apidx][KeyIdx].TxTsc[2] = 0; + pAd->SharedKey[apidx][KeyIdx].TxTsc[3] = 0; + pAd->SharedKey[apidx][KeyIdx].TxTsc[4] = 0; + pAd->SharedKey[apidx][KeyIdx].TxTsc[5] = 0; + // 4. Init TxTsc to one based on WiFi WPA specs + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[0] = 1; + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[1] = 0; + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[2] = 0; + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[3] = 0; + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[4] = 0; + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[5] = 0; + + if (pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11Encryption3Enabled) + { + pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_AES; + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_AES; + } + else if (pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11Encryption2Enabled) + { + pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_TKIP; + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_TKIP; + } + else if (pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11Encryption1Enabled) + { + if (pAd->SharedKey[apidx][KeyIdx].KeyLen == 5) + { + pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_WEP64; + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_WEP64; + } + else if (pAd->SharedKey[apidx][KeyIdx].KeyLen == 13) + { + pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_WEP128; + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_WEP128; + } + else + { + pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_NONE; + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_NONE; + } + } + else + { + pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_NONE; + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_NONE; + } + + if ((pAd->OpMode == OPMODE_STA)) // Pairwise Key. Add BSSID to WCTable + { + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][KeyIdx].CipherAlg; + pAd->MacTab.Content[BSSID_WCID].PairwiseKey.KeyLen = pAd->SharedKey[BSS0][KeyIdx].KeyLen; + } + + if ((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2) || + (pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2PSK)) + { + // + // On WPA2, Update Group Key Cipher. + // + if (!bPairwise) + { + if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled) + pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_AES; + else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled) + pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_TKIP; + } + } + + DBGPRINT(RT_DEBUG_TRACE, ("pAd->SharedKey[%d][%d].CipherAlg = %d\n", apidx, KeyIdx, pAd->SharedKey[apidx][KeyIdx].CipherAlg)); + +#if 0 + DBGPRINT_RAW(RT_DEBUG_TRACE, ("%s Key #%d", CipherName[pAd->SharedKey[apidx][KeyIdx].CipherAlg],KeyIdx)); + for (i = 0; i < 16; i++) + { + DBGPRINT_RAW(RT_DEBUG_TRACE, ("%02x:", pAd->SharedKey[apidx][KeyIdx].Key[i])); + } + DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n Rx MIC Key = ")); + for (i = 0; i < 8; i++) + { + DBGPRINT_RAW(RT_DEBUG_TRACE, ("%02x:", pAd->SharedKey[apidx][KeyIdx].RxMic[i])); + } + DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n Tx MIC Key = ")); + for (i = 0; i < 8; i++) + { + DBGPRINT_RAW(RT_DEBUG_TRACE, ("%02x:", pAd->SharedKey[apidx][KeyIdx].TxMic[i])); + } + DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n RxTSC = ")); + for (i = 0; i < 6; i++) + { + DBGPRINT_RAW(RT_DEBUG_TRACE, ("%02x:", pAd->SharedKey[apidx][KeyIdx].RxTsc[i])); + } +#endif + DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n pKey-> BSSID:%02x:%02x:%02x:%02x:%02x:%02x \n", + pKey->BSSID[0],pKey->BSSID[1],pKey->BSSID[2],pKey->BSSID[3],pKey->BSSID[4],pKey->BSSID[5])); + + if ((bTxKey) && (pAd->OpMode == OPMODE_STA)) // Pairwise Key. Add BSSID to WCTable + RTMPAddBSSIDCipher(pAd, BSSID_WCID, pKey, pAd->SharedKey[BSS0][KeyIdx].CipherAlg); + + + // No matter pairwise key or what leyidx is, always has a copy at on-chip SharedKeytable. + AsicAddSharedKeyEntry(pAd, + apidx, + (UCHAR)KeyIdx, + pAd->SharedKey[apidx][KeyIdx].CipherAlg, + pAd->SharedKey[apidx][KeyIdx].Key, + pAd->SharedKey[apidx][KeyIdx].TxMic, + pAd->SharedKey[apidx][KeyIdx].RxMic); + + // The WCID key specified in used at Tx. For STA, always use pairwise key. + + // ad-hoc mode need to specify WAP Group key with WCID index=BSS0Mcast_WCID. Let's always set this key here. +/* if (bPairwise == FALSE) + { + offset = MAC_IVEIV_TABLE_BASE + (BSS0Mcast_WCID * HW_IVEIV_ENTRY_SIZE); + NdisZeroMemory(IVEIV, 8); + // 1. IV/EIV + // Specify key index to find shared key. + if ((pAd->SharedKey[BSS0][KeyIdx].CipherAlg==CIPHER_TKIP) || + (pAd->SharedKey[BSS0][KeyIdx].CipherAlg==CIPHER_AES)) + IVEIV[3] = 0x20; // Eiv bit on. keyid always 0 for pairwise key + IVEIV[3] |= (KeyIdx<< 6); // groupkey index is not 0 + for (i=0; i<8; i++) + { + RTMP_IO_WRITE8(pAd, offset+i, IVEIV[i]); + } + + // 2. WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:use share key, BSSIdx is 0 + WCIDAttri = (pAd->SharedKey[BSS0][KeyIdx].CipherAlg<<1)|PAIRWISEKEYTABLE; + offset = MAC_WCID_ATTRIBUTE_BASE + (BSS0Mcast_WCID* HW_WCID_ATTRI_SIZE); + RTMP_IO_WRITE32(pAd, offset, WCIDAttri); + + } + +*/ + + if (pAd->SharedKey[apidx][KeyIdx].Type == GROUP_KEY) + { + // 802.1x port control + pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; + DBGPRINT(RT_DEBUG_TRACE,("!!WPA_802_1X_PORT_SECURED!!\n")); + + } + + return (NDIS_STATUS_SUCCESS); +} +#endif + +BOOLEAN RTMPCheckStrPrintAble( + IN CHAR *pInPutStr, + IN UCHAR strLen) +{ + UCHAR i=0; + + for (i=0; i<strLen; i++) + { + if ((pInPutStr[i] < 0x21) || + (pInPutStr[i] > 0x7E)) + return FALSE; + } + + return TRUE; +} + +/* + ======================================================================== + + Routine Description: + Remove WPA Key process + + Arguments: + pAd Pointer to our adapter + pBuf Pointer to the where the key stored + + Return Value: + NDIS_SUCCESS Add key successfully + + IRQL = DISPATCH_LEVEL + + Note: + + ======================================================================== +*/ +#ifdef CONFIG_STA_SUPPORT +VOID RTMPSetDesiredRates( + IN PRTMP_ADAPTER pAdapter, + IN LONG Rates) +{ + NDIS_802_11_RATES aryRates; + + memset(&aryRates, 0x00, sizeof(NDIS_802_11_RATES)); + switch (pAdapter->CommonCfg.PhyMode) + { + case PHY_11A: // A only + switch (Rates) + { + case 6000000: //6M + aryRates[0] = 0x0c; // 6M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0; + break; + case 9000000: //9M + aryRates[0] = 0x12; // 9M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1; + break; + case 12000000: //12M + aryRates[0] = 0x18; // 12M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2; + break; + case 18000000: //18M + aryRates[0] = 0x24; // 18M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3; + break; + case 24000000: //24M + aryRates[0] = 0x30; // 24M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4; + break; + case 36000000: //36M + aryRates[0] = 0x48; // 36M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5; + break; + case 48000000: //48M + aryRates[0] = 0x60; // 48M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6; + break; + case 54000000: //54M + aryRates[0] = 0x6c; // 54M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7; + break; + case -1: //Auto + default: + aryRates[0] = 0x6c; // 54Mbps + aryRates[1] = 0x60; // 48Mbps + aryRates[2] = 0x48; // 36Mbps + aryRates[3] = 0x30; // 24Mbps + aryRates[4] = 0x24; // 18M + aryRates[5] = 0x18; // 12M + aryRates[6] = 0x12; // 9M + aryRates[7] = 0x0c; // 6M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO; + break; + } + break; + case PHY_11BG_MIXED: // B/G Mixed + case PHY_11B: // B only + case PHY_11ABG_MIXED: // A/B/G Mixed + default: + switch (Rates) + { + case 1000000: //1M + aryRates[0] = 0x02; + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0; + break; + case 2000000: //2M + aryRates[0] = 0x04; + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1; + break; + case 5000000: //5.5M + aryRates[0] = 0x0b; // 5.5M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2; + break; + case 11000000: //11M + aryRates[0] = 0x16; // 11M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3; + break; + case 6000000: //6M + aryRates[0] = 0x0c; // 6M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0; + break; + case 9000000: //9M + aryRates[0] = 0x12; // 9M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1; + break; + case 12000000: //12M + aryRates[0] = 0x18; // 12M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2; + break; + case 18000000: //18M + aryRates[0] = 0x24; // 18M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3; + break; + case 24000000: //24M + aryRates[0] = 0x30; // 24M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4; + break; + case 36000000: //36M + aryRates[0] = 0x48; // 36M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5; + break; + case 48000000: //48M + aryRates[0] = 0x60; // 48M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6; + break; + case 54000000: //54M + aryRates[0] = 0x6c; // 54M + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7; + break; + case -1: //Auto + default: + if (pAdapter->CommonCfg.PhyMode == PHY_11B) + { //B Only + aryRates[0] = 0x16; // 11Mbps + aryRates[1] = 0x0b; // 5.5Mbps + aryRates[2] = 0x04; // 2Mbps + aryRates[3] = 0x02; // 1Mbps + } + else + { //(B/G) Mixed or (A/B/G) Mixed + aryRates[0] = 0x6c; // 54Mbps + aryRates[1] = 0x60; // 48Mbps + aryRates[2] = 0x48; // 36Mbps + aryRates[3] = 0x30; // 24Mbps + aryRates[4] = 0x16; // 11Mbps + aryRates[5] = 0x0b; // 5.5Mbps + aryRates[6] = 0x04; // 2Mbps + aryRates[7] = 0x02; // 1Mbps + } + pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO; + break; + } + break; + } + + NdisZeroMemory(pAdapter->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES); + NdisMoveMemory(pAdapter->CommonCfg.DesireRate, &aryRates, sizeof(NDIS_802_11_RATES)); + DBGPRINT(RT_DEBUG_TRACE, (" RTMPSetDesiredRates (%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x)\n", + pAdapter->CommonCfg.DesireRate[0],pAdapter->CommonCfg.DesireRate[1], + pAdapter->CommonCfg.DesireRate[2],pAdapter->CommonCfg.DesireRate[3], + pAdapter->CommonCfg.DesireRate[4],pAdapter->CommonCfg.DesireRate[5], + pAdapter->CommonCfg.DesireRate[6],pAdapter->CommonCfg.DesireRate[7] )); + // Changing DesiredRate may affect the MAX TX rate we used to TX frames out + MlmeUpdateTxRates(pAdapter, FALSE, 0); +} + +NDIS_STATUS RTMPWPARemoveKeyProc( + IN PRTMP_ADAPTER pAd, + IN PVOID pBuf) +{ + PNDIS_802_11_REMOVE_KEY pKey; + ULONG KeyIdx; + NDIS_STATUS Status = NDIS_STATUS_FAILURE; + BOOLEAN bTxKey; // Set the key as transmit key + BOOLEAN bPairwise; // Indicate the key is pairwise key + BOOLEAN bKeyRSC; // indicate the receive SC set by KeyRSC value. + // Otherwise, it will set by the NIC. + BOOLEAN bAuthenticator; // indicate key is set by authenticator. + INT i; + + DBGPRINT(RT_DEBUG_TRACE,("---> RTMPWPARemoveKeyProc\n")); + + pKey = (PNDIS_802_11_REMOVE_KEY) pBuf; + KeyIdx = pKey->KeyIndex & 0xff; + // Bit 31 of Add-key, Tx Key + bTxKey = (pKey->KeyIndex & 0x80000000) ? TRUE : FALSE; + // Bit 30 of Add-key PairwiseKey + bPairwise = (pKey->KeyIndex & 0x40000000) ? TRUE : FALSE; + // Bit 29 of Add-key KeyRSC + bKeyRSC = (pKey->KeyIndex & 0x20000000) ? TRUE : FALSE; + // Bit 28 of Add-key Authenticator + bAuthenticator = (pKey->KeyIndex & 0x10000000) ? TRUE : FALSE; + + // 1. If bTx is TRUE, return failure information + if (bTxKey == TRUE) + return(NDIS_STATUS_INVALID_DATA); + + // 2. Check Pairwise Key + if (bPairwise) + { + // a. If BSSID is broadcast, remove all pairwise keys. + // b. If not broadcast, remove the pairwise specified by BSSID + for (i = 0; i < SHARE_KEY_NUM; i++) + { + if (MAC_ADDR_EQUAL(pAd->SharedKey[BSS0][i].BssId, pKey->BSSID)) + { + DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveKeyProc(KeyIdx=%d)\n", i)); + pAd->SharedKey[BSS0][i].KeyLen = 0; + pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_NONE; + AsicRemoveSharedKeyEntry(pAd, BSS0, (UCHAR)i); + Status = NDIS_STATUS_SUCCESS; + break; + } + } + } + // 3. Group Key + else + { + // a. If BSSID is broadcast, remove all group keys indexed + // b. If BSSID matched, delete the group key indexed. + DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveKeyProc(KeyIdx=%ld)\n", KeyIdx)); + pAd->SharedKey[BSS0][KeyIdx].KeyLen = 0; + pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE; + AsicRemoveSharedKeyEntry(pAd, BSS0, (UCHAR)KeyIdx); + Status = NDIS_STATUS_SUCCESS; + } + + return (Status); +} +#endif // CONFIG_STA_SUPPORT // + + +#ifdef CONFIG_STA_SUPPORT +/* + ======================================================================== + + Routine Description: + Remove All WPA Keys + + Arguments: + pAd Pointer to our adapter + + Return Value: + None + + IRQL = DISPATCH_LEVEL + + Note: + + ======================================================================== +*/ +VOID RTMPWPARemoveAllKeys( + IN PRTMP_ADAPTER pAd) +{ + + UCHAR i; + + DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveAllKeys(AuthMode=%d, WepStatus=%d)\n", pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus)); + + // For WEP/CKIP, there is no need to remove it, since WinXP won't set it again after + // Link up. And it will be replaced if user changed it. + if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA) + return; + + // For WPA-None, there is no need to remove it, since WinXP won't set it again after + // Link up. And it will be replaced if user changed it. + if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) + return; + + // set BSSID wcid entry of the Pair-wise Key table as no-security mode + AsicRemovePairwiseKeyEntry(pAd, BSS0, BSSID_WCID); + + // set all shared key mode as no-security. + for (i = 0; i < SHARE_KEY_NUM; i++) + { + DBGPRINT(RT_DEBUG_TRACE,("remove %s key #%d\n", CipherName[pAd->SharedKey[BSS0][i].CipherAlg], i)); + NdisZeroMemory(&pAd->SharedKey[BSS0][i], sizeof(CIPHER_KEY)); + + AsicRemoveSharedKeyEntry(pAd, BSS0, i); + } + +} +#endif // CONFIG_STA_SUPPORT // + +/* + ======================================================================== + Routine Description: + Change NIC PHY mode. Re-association may be necessary. possible settings + include - PHY_11B, PHY_11BG_MIXED, PHY_11A, and PHY_11ABG_MIXED + + Arguments: + pAd - Pointer to our adapter + phymode - + + IRQL = PASSIVE_LEVEL + IRQL = DISPATCH_LEVEL + + ======================================================================== +*/ +VOID RTMPSetPhyMode( + IN PRTMP_ADAPTER pAd, + IN ULONG phymode) +{ + INT i; + // the selected phymode must be supported by the RF IC encoded in E2PROM + + // if no change, do nothing + /* bug fix + if (pAd->CommonCfg.PhyMode == phymode) + return; + */ + pAd->CommonCfg.PhyMode = (UCHAR)phymode; + + DBGPRINT(RT_DEBUG_TRACE,("RTMPSetPhyMode : PhyMode=%d, channel=%d \n", pAd->CommonCfg.PhyMode, pAd->CommonCfg.Channel)); +#ifdef EXT_BUILD_CHANNEL_LIST + BuildChannelListEx(pAd); +#else + BuildChannelList(pAd); +#endif // EXT_BUILD_CHANNEL_LIST // + + // sanity check user setting + for (i = 0; i < pAd->ChannelListNum; i++) + { + if (pAd->CommonCfg.Channel == pAd->ChannelList[i].Channel) + break; + } + + if (i == pAd->ChannelListNum) + { +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + pAd->CommonCfg.Channel = FirstChannel(pAd); +#endif // CONFIG_STA_SUPPORT // + DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel)); + } + + NdisZeroMemory(pAd->CommonCfg.SupRate, MAX_LEN_OF_SUPPORTED_RATES); + NdisZeroMemory(pAd->CommonCfg.ExtRate, MAX_LEN_OF_SUPPORTED_RATES); + NdisZeroMemory(pAd->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES); + switch (phymode) { + case PHY_11B: + pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate + pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate + pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate + pAd->CommonCfg.SupRate[3] = 0x96; // 11 mbps, in units of 0.5 Mbps, basic rate + pAd->CommonCfg.SupRateLen = 4; + pAd->CommonCfg.ExtRateLen = 0; + pAd->CommonCfg.DesireRate[0] = 2; // 1 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[1] = 4; // 2 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[2] = 11; // 5.5 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[3] = 22; // 11 mbps, in units of 0.5 Mbps + //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_CCK; // This MODE is only FYI. not use + break; + + case PHY_11G: + case PHY_11BG_MIXED: + case PHY_11ABG_MIXED: +#ifdef DOT11_N_SUPPORT + case PHY_11N_2_4G: + case PHY_11ABGN_MIXED: + case PHY_11BGN_MIXED: + case PHY_11GN_MIXED: +#endif // DOT11_N_SUPPORT // + pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate + pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate + pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate + pAd->CommonCfg.SupRate[3] = 0x96; // 11 mbps, in units of 0.5 Mbps, basic rate + pAd->CommonCfg.SupRate[4] = 0x12; // 9 mbps, in units of 0.5 Mbps + pAd->CommonCfg.SupRate[5] = 0x24; // 18 mbps, in units of 0.5 Mbps + pAd->CommonCfg.SupRate[6] = 0x48; // 36 mbps, in units of 0.5 Mbps + pAd->CommonCfg.SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps + pAd->CommonCfg.SupRateLen = 8; + pAd->CommonCfg.ExtRate[0] = 0x0C; // 6 mbps, in units of 0.5 Mbps + pAd->CommonCfg.ExtRate[1] = 0x18; // 12 mbps, in units of 0.5 Mbps + pAd->CommonCfg.ExtRate[2] = 0x30; // 24 mbps, in units of 0.5 Mbps + pAd->CommonCfg.ExtRate[3] = 0x60; // 48 mbps, in units of 0.5 Mbps + pAd->CommonCfg.ExtRateLen = 4; + pAd->CommonCfg.DesireRate[0] = 2; // 1 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[1] = 4; // 2 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[2] = 11; // 5.5 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[3] = 22; // 11 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[4] = 12; // 6 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[5] = 18; // 9 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[6] = 24; // 12 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[7] = 36; // 18 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[8] = 48; // 24 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[9] = 72; // 36 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[10] = 96; // 48 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[11] = 108; // 54 mbps, in units of 0.5 Mbps + break; + + case PHY_11A: +#ifdef DOT11_N_SUPPORT + case PHY_11AN_MIXED: + case PHY_11AGN_MIXED: + case PHY_11N_5G: +#endif // DOT11_N_SUPPORT // + pAd->CommonCfg.SupRate[0] = 0x8C; // 6 mbps, in units of 0.5 Mbps, basic rate + pAd->CommonCfg.SupRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps + pAd->CommonCfg.SupRate[2] = 0x98; // 12 mbps, in units of 0.5 Mbps, basic rate + pAd->CommonCfg.SupRate[3] = 0x24; // 18 mbps, in units of 0.5 Mbps + pAd->CommonCfg.SupRate[4] = 0xb0; // 24 mbps, in units of 0.5 Mbps, basic rate + pAd->CommonCfg.SupRate[5] = 0x48; // 36 mbps, in units of 0.5 Mbps + pAd->CommonCfg.SupRate[6] = 0x60; // 48 mbps, in units of 0.5 Mbps + pAd->CommonCfg.SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps + pAd->CommonCfg.SupRateLen = 8; + pAd->CommonCfg.ExtRateLen = 0; + pAd->CommonCfg.DesireRate[0] = 12; // 6 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[1] = 18; // 9 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[2] = 24; // 12 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[3] = 36; // 18 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[4] = 48; // 24 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[5] = 72; // 36 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[6] = 96; // 48 mbps, in units of 0.5 Mbps + pAd->CommonCfg.DesireRate[7] = 108; // 54 mbps, in units of 0.5 Mbps + //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_OFDM; // This MODE is only FYI. not use + break; + + default: + break; + } + + + pAd->CommonCfg.BandState = UNKNOWN_BAND; +} + + +#ifdef DOT11_N_SUPPORT +/* + ======================================================================== + Routine Description: + Caller ensures we has 802.11n support. + Calls at setting HT from AP/STASetinformation + + Arguments: + pAd - Pointer to our adapter + phymode - + + ======================================================================== +*/ +VOID RTMPSetHT( + IN PRTMP_ADAPTER pAd, + IN OID_SET_HT_PHYMODE *pHTPhyMode) +{ + //ULONG *pmcs; + UINT32 Value = 0; + UCHAR BBPValue = 0; + UCHAR BBP3Value = 0; + UCHAR RxStream = pAd->CommonCfg.RxStream; + + DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : HT_mode(%d), ExtOffset(%d), MCS(%d), BW(%d), STBC(%d), SHORTGI(%d)\n", + pHTPhyMode->HtMode, pHTPhyMode->ExtOffset, + pHTPhyMode->MCS, pHTPhyMode->BW, + pHTPhyMode->STBC, pHTPhyMode->SHORTGI)); + + // Don't zero supportedHyPhy structure. + RTMPZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability)); + RTMPZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo)); + RTMPZeroMemory(&pAd->CommonCfg.NewExtChanOffset, sizeof(pAd->CommonCfg.NewExtChanOffset)); + RTMPZeroMemory(&pAd->CommonCfg.DesiredHtPhy, sizeof(pAd->CommonCfg.DesiredHtPhy)); + + if (pAd->CommonCfg.bRdg) + { + pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 1; + pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 1; + } + else + { + pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 0; + pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 0; + } + + pAd->CommonCfg.HtCapability.HtCapParm.MaxRAmpduFactor = 3; + pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor = 3; + + DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : RxBAWinLimit = %d\n", pAd->CommonCfg.BACapability.field.RxBAWinLimit)); + + // Mimo power save, A-MSDU size, + pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable; + pAd->CommonCfg.DesiredHtPhy.AmsduSize = (UCHAR)pAd->CommonCfg.BACapability.field.AmsduSize; + pAd->CommonCfg.DesiredHtPhy.MimoPs = (UCHAR)pAd->CommonCfg.BACapability.field.MMPSmode; + pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; + + pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; + pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; + pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; + + DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : AMsduSize = %d, MimoPs = %d, MpduDensity = %d, MaxRAmpduFactor = %d\n", + pAd->CommonCfg.DesiredHtPhy.AmsduSize, + pAd->CommonCfg.DesiredHtPhy.MimoPs, + pAd->CommonCfg.DesiredHtPhy.MpduDensity, + pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor)); + + if(pHTPhyMode->HtMode == HTMODE_GF) + { + pAd->CommonCfg.HtCapability.HtCapInfo.GF = 1; + pAd->CommonCfg.DesiredHtPhy.GF = 1; + } + else + pAd->CommonCfg.DesiredHtPhy.GF = 0; + + // Decide Rx MCSSet + switch (RxStream) + { + case 1: + pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff; + pAd->CommonCfg.HtCapability.MCSSet[1] = 0x00; + break; + + case 2: + pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff; + pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff; + break; + + case 3: // 3*3 + pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff; + pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff; + pAd->CommonCfg.HtCapability.MCSSet[2] = 0xff; + break; + } + + if (pAd->CommonCfg.bForty_Mhz_Intolerant && (pAd->CommonCfg.Channel <= 14) && (pHTPhyMode->BW == BW_40) ) + { + pHTPhyMode->BW = BW_20; + pAd->CommonCfg.HtCapability.HtCapInfo.Forty_Mhz_Intolerant = 1; + } + + if(pHTPhyMode->BW == BW_40) + { + pAd->CommonCfg.HtCapability.MCSSet[4] = 0x1; // MCS 32 + pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 1; + if (pAd->CommonCfg.Channel <= 14) + pAd->CommonCfg.HtCapability.HtCapInfo.CCKmodein40 = 1; + + pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 1; + pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 1; + pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = (pHTPhyMode->ExtOffset == EXTCHA_BELOW)? (EXTCHA_BELOW): EXTCHA_ABOVE; + // Set Regsiter for extension channel position. + RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value); + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBP3Value); + if ((pHTPhyMode->ExtOffset == EXTCHA_BELOW)) + { + Value |= 0x1; + BBP3Value |= (0x20); + RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value); + } + else if ((pHTPhyMode->ExtOffset == EXTCHA_ABOVE)) + { + Value &= 0xfe; + BBP3Value &= (~0x20); + RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value); + } + + // Turn on BBP 40MHz mode now only as AP . + // Sta can turn on BBP 40MHz after connection with 40MHz AP. Sta only broadcast 40MHz capability before connection. + if ((pAd->OpMode == OPMODE_AP) || INFRA_ON(pAd) || ADHOC_ON(pAd) + ) + { + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); + BBPValue &= (~0x18); + BBPValue |= 0x10; + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); + + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBP3Value); + pAd->CommonCfg.BBPCurrentBW = BW_40; + } + } + else + { + pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 0; + pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 0; + pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 0; + pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = EXTCHA_NONE; + pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel; + // Turn on BBP 20MHz mode by request here. + { + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); + BBPValue &= (~0x18); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); + pAd->CommonCfg.BBPCurrentBW = BW_20; + } + } + + if(pHTPhyMode->STBC == STBC_USE) + { + pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 1; + pAd->CommonCfg.DesiredHtPhy.TxSTBC = 1; + pAd->CommonCfg.HtCapability.HtCapInfo.RxSTBC = 1; + pAd->CommonCfg.DesiredHtPhy.RxSTBC = 1; + } + else + { + pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0; + pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0; + } + +#ifdef RT2870 + /* Frank recommend ,If not, Tx maybe block in high power. Rx has no problem*/ + if(IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020))) + { + pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 0; + pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0; + } +#endif // RT2870 // + + if(pHTPhyMode->SHORTGI == GI_400) + { + pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 1; + pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 1; + pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 1; + pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 1; + } + else + { + pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 0; + pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 0; + pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 0; + pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 0; + } + + // We support link adaptation for unsolicit MCS feedback, set to 2. + pAd->CommonCfg.HtCapability.ExtHtCapInfo.MCSFeedback = MCSFBK_NONE; //MCSFBK_UNSOLICIT; + pAd->CommonCfg.AddHTInfo.ControlChan = pAd->CommonCfg.Channel; + // 1, the extension channel above the control channel. + + // EDCA parameters used for AP's own transmission + if (pAd->CommonCfg.APEdcaParm.bValid == FALSE) + { + pAd->CommonCfg.APEdcaParm.bValid = TRUE; + pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3; + pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7; + pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1; + pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1; + + pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4; + pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4; + pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3; + pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2; + + pAd->CommonCfg.APEdcaParm.Cwmax[0] = 6; + pAd->CommonCfg.APEdcaParm.Cwmax[1] = 10; + pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4; + pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3; + + pAd->CommonCfg.APEdcaParm.Txop[0] = 0; + pAd->CommonCfg.APEdcaParm.Txop[1] = 0; + pAd->CommonCfg.APEdcaParm.Txop[2] = 94; + pAd->CommonCfg.APEdcaParm.Txop[3] = 47; + } + AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm); + + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { + RTMPSetIndividualHT(pAd, 0); + } +#endif // CONFIG_STA_SUPPORT // + +} + +/* + ======================================================================== + Routine Description: + Caller ensures we has 802.11n support. + Calls at setting HT from AP/STASetinformation + + Arguments: + pAd - Pointer to our adapter + phymode - + + ======================================================================== +*/ +VOID RTMPSetIndividualHT( + IN PRTMP_ADAPTER pAd, + IN UCHAR apidx) +{ + PRT_HT_PHY_INFO pDesired_ht_phy = NULL; + UCHAR TxStream = pAd->CommonCfg.TxStream; + UCHAR DesiredMcs = MCS_AUTO; + + do + { + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { + pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo; + DesiredMcs = pAd->StaCfg.DesiredTransmitSetting.field.MCS; + //pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE; + break; + } +#endif // CONFIG_STA_SUPPORT // + } while (FALSE); + + if (pDesired_ht_phy == NULL) + { + DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetIndividualHT: invalid apidx(%d)\n", apidx)); + return; + } + RTMPZeroMemory(pDesired_ht_phy, sizeof(RT_HT_PHY_INFO)); + + DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetIndividualHT : Desired MCS = %d\n", DesiredMcs)); + // Check the validity of MCS + if ((TxStream == 1) && ((DesiredMcs >= MCS_8) && (DesiredMcs <= MCS_15))) + { + DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS(%d) is invalid in 1S, reset it as MCS_7\n", DesiredMcs)); + DesiredMcs = MCS_7; + } + + if ((pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_20) && (DesiredMcs == MCS_32)) + { + DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS_32 is only supported in 40-MHz, reset it as MCS_0\n")); + DesiredMcs = MCS_0; + } + + pDesired_ht_phy->bHtEnable = TRUE; + + // Decide desired Tx MCS + switch (TxStream) + { + case 1: + if (DesiredMcs == MCS_AUTO) + { + pDesired_ht_phy->MCSSet[0]= 0xff; + pDesired_ht_phy->MCSSet[1]= 0x00; + } + else if (DesiredMcs <= MCS_7) + { + pDesired_ht_phy->MCSSet[0]= 1<<DesiredMcs; + pDesired_ht_phy->MCSSet[1]= 0x00; + } + break; + + case 2: + if (DesiredMcs == MCS_AUTO) + { + pDesired_ht_phy->MCSSet[0]= 0xff; + pDesired_ht_phy->MCSSet[1]= 0xff; + } + else if (DesiredMcs <= MCS_15) + { + ULONG mode; + + mode = DesiredMcs / 8; + if (mode < 2) + pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8)); + } + break; + + case 3: // 3*3 + if (DesiredMcs == MCS_AUTO) + { + /* MCS0 ~ MCS23, 3 bytes */ + pDesired_ht_phy->MCSSet[0]= 0xff; + pDesired_ht_phy->MCSSet[1]= 0xff; + pDesired_ht_phy->MCSSet[2]= 0xff; + } + else if (DesiredMcs <= MCS_23) + { + ULONG mode; + + mode = DesiredMcs / 8; + if (mode < 3) + pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8)); + } + break; + } + + if(pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_40) + { + if (DesiredMcs == MCS_AUTO || DesiredMcs == MCS_32) + pDesired_ht_phy->MCSSet[4] = 0x1; + } + + // update HT Rate setting + if (pAd->OpMode == OPMODE_STA) + MlmeUpdateHtTxRates(pAd, BSS0); + else + MlmeUpdateHtTxRates(pAd, apidx); +} + + +/* + ======================================================================== + Routine Description: + Update HT IE from our capability. + + Arguments: + Send all HT IE in beacon/probe rsp/assoc rsp/action frame. + + + ======================================================================== +*/ +VOID RTMPUpdateHTIE( + IN RT_HT_CAPABILITY *pRtHt, + IN UCHAR *pMcsSet, + OUT HT_CAPABILITY_IE *pHtCapability, + OUT ADD_HT_INFO_IE *pAddHtInfo) +{ + RTMPZeroMemory(pHtCapability, sizeof(HT_CAPABILITY_IE)); + RTMPZeroMemory(pAddHtInfo, sizeof(ADD_HT_INFO_IE)); + + pHtCapability->HtCapInfo.ChannelWidth = pRtHt->ChannelWidth; + pHtCapability->HtCapInfo.MimoPs = pRtHt->MimoPs; + pHtCapability->HtCapInfo.GF = pRtHt->GF; + pHtCapability->HtCapInfo.ShortGIfor20 = pRtHt->ShortGIfor20; + pHtCapability->HtCapInfo.ShortGIfor40 = pRtHt->ShortGIfor40; + pHtCapability->HtCapInfo.TxSTBC = pRtHt->TxSTBC; + pHtCapability->HtCapInfo.RxSTBC = pRtHt->RxSTBC; + pHtCapability->HtCapInfo.AMsduSize = pRtHt->AmsduSize; + pHtCapability->HtCapParm.MaxRAmpduFactor = pRtHt->MaxRAmpduFactor; + pHtCapability->HtCapParm.MpduDensity = pRtHt->MpduDensity; + + pAddHtInfo->AddHtInfo.ExtChanOffset = pRtHt->ExtChanOffset ; + pAddHtInfo->AddHtInfo.RecomWidth = pRtHt->RecomWidth; + pAddHtInfo->AddHtInfo2.OperaionMode = pRtHt->OperaionMode; + pAddHtInfo->AddHtInfo2.NonGfPresent = pRtHt->NonGfPresent; + RTMPMoveMemory(pAddHtInfo->MCSSet, /*pRtHt->MCSSet*/pMcsSet, 4); // rt2860 only support MCS max=32, no need to copy all 16 uchar. + + DBGPRINT(RT_DEBUG_TRACE,("RTMPUpdateHTIE <== \n")); +} +#endif // DOT11_N_SUPPORT // + +/* + ======================================================================== + Description: + Add Client security information into ASIC WCID table and IVEIV table. + Return: + ======================================================================== +*/ +VOID RTMPAddWcidAttributeEntry( + IN PRTMP_ADAPTER pAd, + IN UCHAR BssIdx, + IN UCHAR KeyIdx, + IN UCHAR CipherAlg, + IN MAC_TABLE_ENTRY *pEntry) +{ + UINT32 WCIDAttri = 0; + USHORT offset; + UCHAR IVEIV = 0; + USHORT Wcid = 0; + + { +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { + if (BssIdx > BSS0) + { + DBGPRINT(RT_DEBUG_ERROR, ("RTMPAddWcidAttributeEntry: The BSS-index(%d) is out of range for Infra link. \n", BssIdx)); + return; + } + + // 1. In ADHOC mode, the AID is wcid number. And NO mesh link exists. + // 2. In Infra mode, the AID:1 MUST be wcid of infra STA. + // the AID:2~ assign to mesh link entry. + if (pEntry && ADHOC_ON(pAd)) + Wcid = pEntry->Aid; + else if (pEntry && INFRA_ON(pAd)) + { +#ifdef QOS_DLS_SUPPORT + if (pEntry->ValidAsDls == TRUE) + Wcid = pEntry->Aid; + else +#endif // QOS_DLS_SUPPORT // + Wcid = BSSID_WCID; + } + else + Wcid = MCAST_WCID; + } +#endif // CONFIG_STA_SUPPORT // + } + + // Update WCID attribute table + offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE); + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { + if (pEntry && pEntry->ValidAsMesh) + WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE; +#ifdef QOS_DLS_SUPPORT + else if ((pEntry) && (pEntry->ValidAsDls) && + ((CipherAlg == CIPHER_TKIP) || + (CipherAlg == CIPHER_TKIP_NO_MIC) || + (CipherAlg == CIPHER_AES) || + (CipherAlg == CIPHER_NONE))) + WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE; +#endif // QOS_DLS_SUPPORT // + else + WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE; + } +#endif // CONFIG_STA_SUPPORT // + + RTMP_IO_WRITE32(pAd, offset, WCIDAttri); + + + // Update IV/EIV table + offset = MAC_IVEIV_TABLE_BASE + (Wcid * HW_IVEIV_ENTRY_SIZE); + + // WPA mode + if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC) || (CipherAlg == CIPHER_AES)) + { + // Eiv bit on. keyid always is 0 for pairwise key + IVEIV = (KeyIdx <<6) | 0x20; + } + else + { + // WEP KeyIdx is default tx key. + IVEIV = (KeyIdx << 6); + } + + // For key index and ext IV bit, so only need to update the position(offset+3). +#ifdef RT2870 + RTUSBMultiWrite_OneByte(pAd, offset+3, &IVEIV); +#endif // RT2870 // + + DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg])); + DBGPRINT(RT_DEBUG_TRACE,(" WCIDAttri = 0x%x \n", WCIDAttri)); + +} + +/* + ========================================================================== + Description: + Parse encryption type +Arguments: + pAdapter Pointer to our adapter + wrq Pointer to the ioctl argument + + Return Value: + None + + Note: + ========================================================================== +*/ +CHAR *GetEncryptType(CHAR enc) +{ + if(enc == Ndis802_11WEPDisabled) + return "NONE"; + if(enc == Ndis802_11WEPEnabled) + return "WEP"; + if(enc == Ndis802_11Encryption2Enabled) + return "TKIP"; + if(enc == Ndis802_11Encryption3Enabled) + return "AES"; + if(enc == Ndis802_11Encryption4Enabled) + return "TKIPAES"; + else + return "UNKNOW"; +} + +CHAR *GetAuthMode(CHAR auth) +{ + if(auth == Ndis802_11AuthModeOpen) + return "OPEN"; + if(auth == Ndis802_11AuthModeShared) + return "SHARED"; + if(auth == Ndis802_11AuthModeAutoSwitch) + return "AUTOWEP"; + if(auth == Ndis802_11AuthModeWPA) + return "WPA"; + if(auth == Ndis802_11AuthModeWPAPSK) + return "WPAPSK"; + if(auth == Ndis802_11AuthModeWPANone) + return "WPANONE"; + if(auth == Ndis802_11AuthModeWPA2) + return "WPA2"; + if(auth == Ndis802_11AuthModeWPA2PSK) + return "WPA2PSK"; + if(auth == Ndis802_11AuthModeWPA1WPA2) + return "WPA1WPA2"; + if(auth == Ndis802_11AuthModeWPA1PSKWPA2PSK) + return "WPA1PSKWPA2PSK"; + + return "UNKNOW"; +} + +#if 1 //#ifndef UCOS +/* + ========================================================================== + Description: + Get site survey results + Arguments: + pAdapter Pointer to our adapter + wrq Pointer to the ioctl argument + + Return Value: + None + + Note: + Usage: + 1.) UI needs to wait 4 seconds after issue a site survey command + 2.) iwpriv ra0 get_site_survey + 3.) UI needs to prepare at least 4096bytes to get the results + ========================================================================== +*/ +#define LINE_LEN (4+33+20+8+10+9+7+3) // Channel+SSID+Bssid+WepStatus+AuthMode+Signal+WiressMode+NetworkType +VOID RTMPIoctlGetSiteSurvey( + IN PRTMP_ADAPTER pAdapter, + IN struct iwreq *wrq) +{ + CHAR *msg; + INT i=0; + INT WaitCnt; + INT Status=0; + CHAR Ssid[MAX_LEN_OF_SSID +1]; + INT Rssi = 0, max_len = LINE_LEN; + UINT Rssi_Quality = 0; + NDIS_802_11_NETWORK_TYPE wireless_mode; + + os_alloc_mem(NULL, (PUCHAR *)&msg, sizeof(CHAR)*((MAX_LEN_OF_BSS_TABLE)*max_len)); + + if (msg == NULL) + { + DBGPRINT(RT_DEBUG_TRACE, ("RTMPIoctlGetSiteSurvey - msg memory alloc fail.\n")); + return; + } + + memset(msg, 0 ,(MAX_LEN_OF_BSS_TABLE)*max_len ); + memset(Ssid, 0 ,(MAX_LEN_OF_SSID +1)); + sprintf(msg,"%s","\n"); + sprintf(msg+strlen(msg),"%-4s%-33s%-20s%-8s%-10s%-9s%-7s%-3s\n", + "Ch", "SSID", "BSSID", "Enc", "Auth", "Siganl(%)", "W-Mode", " NT"); + + + WaitCnt = 0; +#ifdef CONFIG_STA_SUPPORT + pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE; + while ((ScanRunning(pAdapter) == TRUE) && (WaitCnt++ < 200)) + OS_WAIT(500); +#endif // CONFIG_STA_SUPPORT // + + for(i=0; i<pAdapter->ScanTab.BssNr ;i++) + { + if( pAdapter->ScanTab.BssEntry[i].Channel==0) + break; + + if((strlen(msg)+max_len ) >= IW_SCAN_MAX_DATA) + break; + + //Channel + sprintf(msg+strlen(msg),"%-4d", pAdapter->ScanTab.BssEntry[i].Channel); + //SSID + memcpy(Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen); + Ssid[pAdapter->ScanTab.BssEntry[i].SsidLen] = '\0'; + sprintf(msg+strlen(msg),"%-33s", Ssid); + //BSSID + sprintf(msg+strlen(msg),"%02x:%02x:%02x:%02x:%02x:%02x ", + pAdapter->ScanTab.BssEntry[i].Bssid[0], + pAdapter->ScanTab.BssEntry[i].Bssid[1], + pAdapter->ScanTab.BssEntry[i].Bssid[2], + pAdapter->ScanTab.BssEntry[i].Bssid[3], + pAdapter->ScanTab.BssEntry[i].Bssid[4], + pAdapter->ScanTab.BssEntry[i].Bssid[5]); + //Encryption Type + sprintf(msg+strlen(msg),"%-8s",GetEncryptType(pAdapter->ScanTab.BssEntry[i].WepStatus)); + //Authentication Mode + if (pAdapter->ScanTab.BssEntry[i].WepStatus == Ndis802_11WEPEnabled) + sprintf(msg+strlen(msg),"%-10s", "UNKNOW"); + else + sprintf(msg+strlen(msg),"%-10s",GetAuthMode(pAdapter->ScanTab.BssEntry[i].AuthMode)); + // Rssi + Rssi = (INT)pAdapter->ScanTab.BssEntry[i].Rssi; + if (Rssi >= -50) + Rssi_Quality = 100; + else if (Rssi >= -80) // between -50 ~ -80dbm + Rssi_Quality = (UINT)(24 + ((Rssi + 80) * 26)/10); + else if (Rssi >= -90) // between -80 ~ -90dbm + Rssi_Quality = (UINT)(((Rssi + 90) * 26)/10); + else // < -84 dbm + Rssi_Quality = 0; + sprintf(msg+strlen(msg),"%-9d", Rssi_Quality); + // Wireless Mode + wireless_mode = NetworkTypeInUseSanity(&pAdapter->ScanTab.BssEntry[i]); + if (wireless_mode == Ndis802_11FH || + wireless_mode == Ndis802_11DS) + sprintf(msg+strlen(msg),"%-7s", "11b"); + else if (wireless_mode == Ndis802_11OFDM5) + sprintf(msg+strlen(msg),"%-7s", "11a"); + else if (wireless_mode == Ndis802_11OFDM5_N) + sprintf(msg+strlen(msg),"%-7s", "11a/n"); + else if (wireless_mode == Ndis802_11OFDM24) + sprintf(msg+strlen(msg),"%-7s", "11b/g"); + else if (wireless_mode == Ndis802_11OFDM24_N) + sprintf(msg+strlen(msg),"%-7s", "11b/g/n"); + else + sprintf(msg+strlen(msg),"%-7s", "unknow"); + //Network Type + if (pAdapter->ScanTab.BssEntry[i].BssType == BSS_ADHOC) + sprintf(msg+strlen(msg),"%-3s", " Ad"); + else + sprintf(msg+strlen(msg),"%-3s", " In"); + + sprintf(msg+strlen(msg),"\n"); + } + +#ifdef CONFIG_STA_SUPPORT + pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE; +#endif // CONFIG_STA_SUPPORT // + wrq->u.data.length = strlen(msg); + Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length); + + DBGPRINT(RT_DEBUG_TRACE, ("RTMPIoctlGetSiteSurvey - wrq->u.data.length = %d\n", wrq->u.data.length)); + os_free_mem(NULL, (PUCHAR)msg); +} + + +#define MAC_LINE_LEN (14+4+4+10+10+10+6+6) // Addr+aid+psm+datatime+rxbyte+txbyte+current tx rate+last tx rate +VOID RTMPIoctlGetMacTable( + IN PRTMP_ADAPTER pAd, + IN struct iwreq *wrq) +{ + INT i; + RT_802_11_MAC_TABLE MacTab; + char *msg; + + MacTab.Num = 0; + for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++) + { + if (pAd->MacTab.Content[i].ValidAsCLI && (pAd->MacTab.Content[i].Sst == SST_ASSOC)) + { + COPY_MAC_ADDR(MacTab.Entry[MacTab.Num].Addr, &pAd->MacTab.Content[i].Addr); + MacTab.Entry[MacTab.Num].Aid = (UCHAR)pAd->MacTab.Content[i].Aid; + MacTab.Entry[MacTab.Num].Psm = pAd->MacTab.Content[i].PsMode; +#ifdef DOT11_N_SUPPORT + MacTab.Entry[MacTab.Num].MimoPs = pAd->MacTab.Content[i].MmpsMode; +#endif // DOT11_N_SUPPORT // + + // Fill in RSSI per entry + MacTab.Entry[MacTab.Num].AvgRssi0 = pAd->MacTab.Content[i].RssiSample.AvgRssi0; + MacTab.Entry[MacTab.Num].AvgRssi1 = pAd->MacTab.Content[i].RssiSample.AvgRssi1; + MacTab.Entry[MacTab.Num].AvgRssi2 = pAd->MacTab.Content[i].RssiSample.AvgRssi2; + + // the connected time per entry + MacTab.Entry[MacTab.Num].ConnectedTime = pAd->MacTab.Content[i].StaConnectTime; +#if 0 // ToDo + MacTab.Entry[MacTab.Num].HSCounter.LastDataPacketTime = pAd->MacTab.Content[i].HSCounter.LastDataPacketTime; + MacTab.Entry[MacTab.Num].HSCounter.TotalRxByteCount = pAd->MacTab.Content[i].HSCounter.TotalRxByteCount; + MacTab.Entry[MacTab.Num].HSCounter.TotalTxByteCount = pAd->MacTab.Content[i].HSCounter.TotalTxByteCount; +#endif + MacTab.Entry[MacTab.Num].TxRate.field.MCS = pAd->MacTab.Content[i].HTPhyMode.field.MCS; + MacTab.Entry[MacTab.Num].TxRate.field.BW = pAd->MacTab.Content[i].HTPhyMode.field.BW; + MacTab.Entry[MacTab.Num].TxRate.field.ShortGI = pAd->MacTab.Content[i].HTPhyMode.field.ShortGI; + MacTab.Entry[MacTab.Num].TxRate.field.STBC = pAd->MacTab.Content[i].HTPhyMode.field.STBC; + MacTab.Entry[MacTab.Num].TxRate.field.rsv = pAd->MacTab.Content[i].HTPhyMode.field.rsv; + MacTab.Entry[MacTab.Num].TxRate.field.MODE = pAd->MacTab.Content[i].HTPhyMode.field.MODE; + MacTab.Entry[MacTab.Num].TxRate.word = pAd->MacTab.Content[i].HTPhyMode.word; + + MacTab.Num += 1; + } + } + wrq->u.data.length = sizeof(RT_802_11_MAC_TABLE); + if (copy_to_user(wrq->u.data.pointer, &MacTab, wrq->u.data.length)) + { + DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __func__)); + } + + msg = (CHAR *) kmalloc(sizeof(CHAR)*(MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN), MEM_ALLOC_FLAG); + memset(msg, 0 ,MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN ); + sprintf(msg,"%s","\n"); + sprintf(msg+strlen(msg),"%-14s%-4s%-4s%-10s%-10s%-10s%-6s%-6s\n", + "MAC", "AID", "PSM", "LDT", "RxB", "TxB","CTxR", "LTxR"); + + for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++) + { + PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i]; + if (pEntry->ValidAsCLI && (pEntry->Sst == SST_ASSOC)) + { + if((strlen(msg)+MAC_LINE_LEN ) >= (MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN) ) + break; + sprintf(msg+strlen(msg),"%02x%02x%02x%02x%02x%02x ", + pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2], + pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]); + sprintf(msg+strlen(msg),"%-4d", (int)pEntry->Aid); + sprintf(msg+strlen(msg),"%-4d", (int)pEntry->PsMode); + sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.LastDataPacketTime*/); // ToDo + sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.TotalRxByteCount*/); // ToDo + sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.TotalTxByteCount*/); // ToDo + sprintf(msg+strlen(msg),"%-6d",RateIdToMbps[pAd->MacTab.Content[i].CurrTxRate]); + sprintf(msg+strlen(msg),"%-6d\n",0/*RateIdToMbps[pAd->MacTab.Content[i].LastTxRate]*/); // ToDo + } + } + // for compatible with old API just do the printk to console + //wrq->u.data.length = strlen(msg); + //if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length)) + { + DBGPRINT(RT_DEBUG_TRACE, ("%s", msg)); + } + + kfree(msg); +} +#endif // UCOS // + +#ifdef DOT11_N_SUPPORT +INT Set_BASetup_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + UCHAR mac[6], tid; + char *token, sepValue[] = ":", DASH = '-'; + INT i; + MAC_TABLE_ENTRY *pEntry; + +/* + The BASetup inupt string format should be xx:xx:xx:xx:xx:xx-d, + =>The six 2 digit hex-decimal number previous are the Mac address, + =>The seventh decimal number is the tid value. +*/ + //printk("\n%s\n", arg); + + if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format. + return FALSE; + + token = strchr(arg, DASH); + if ((token != NULL) && (strlen(token)>1)) + { + tid = simple_strtol((token+1), 0, 10); + if (tid > 15) + return FALSE; + + *token = '\0'; + for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++) + { + if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1)))) + return FALSE; + AtoH(token, (PUCHAR)(&mac[i]), 1); + } + if(i != 6) + return FALSE; + + printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x\n", mac[0], mac[1], + mac[2], mac[3], mac[4], mac[5], tid); + + pEntry = MacTableLookup(pAd, mac); + + if (pEntry) { + printk("\nSetup BA Session: Tid = %d\n", tid); + BAOriSessionSetUp(pAd, pEntry, tid, 0, 100, TRUE); + } + + return TRUE; + } + + return FALSE; + +} + +INT Set_BADecline_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG bBADecline; + + bBADecline = simple_strtol(arg, 0, 10); + + if (bBADecline == 0) + { + pAd->CommonCfg.bBADecline = FALSE; + } + else if (bBADecline == 1) + { + pAd->CommonCfg.bBADecline = TRUE; + } + else + { + return FALSE; //Invalid argument + } + + DBGPRINT(RT_DEBUG_TRACE, ("Set_BADecline_Proc::(BADecline=%d)\n", pAd->CommonCfg.bBADecline)); + + return TRUE; +} + +INT Set_BAOriTearDown_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + UCHAR mac[6], tid; + char *token, sepValue[] = ":", DASH = '-'; + INT i; + MAC_TABLE_ENTRY *pEntry; + + //printk("\n%s\n", arg); +/* + The BAOriTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d, + =>The six 2 digit hex-decimal number previous are the Mac address, + =>The seventh decimal number is the tid value. +*/ + if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format. + return FALSE; + + token = strchr(arg, DASH); + if ((token != NULL) && (strlen(token)>1)) + { + tid = simple_strtol((token+1), 0, 10); + if (tid > NUM_OF_TID) + return FALSE; + + *token = '\0'; + for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++) + { + if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1)))) + return FALSE; + AtoH(token, (PUCHAR)(&mac[i]), 1); + } + if(i != 6) + return FALSE; + + printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1], + mac[2], mac[3], mac[4], mac[5], tid); + + pEntry = MacTableLookup(pAd, mac); + + if (pEntry) { + printk("\nTear down Ori BA Session: Tid = %d\n", tid); + BAOriSessionTearDown(pAd, pEntry->Aid, tid, FALSE, TRUE); + } + + return TRUE; + } + + return FALSE; + +} + +INT Set_BARecTearDown_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + UCHAR mac[6], tid; + char *token, sepValue[] = ":", DASH = '-'; + INT i; + MAC_TABLE_ENTRY *pEntry; + + //printk("\n%s\n", arg); +/* + The BARecTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d, + =>The six 2 digit hex-decimal number previous are the Mac address, + =>The seventh decimal number is the tid value. +*/ + if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format. + return FALSE; + + token = strchr(arg, DASH); + if ((token != NULL) && (strlen(token)>1)) + { + tid = simple_strtol((token+1), 0, 10); + if (tid > NUM_OF_TID) + return FALSE; + + *token = '\0'; + for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++) + { + if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1)))) + return FALSE; + AtoH(token, (PUCHAR)(&mac[i]), 1); + } + if(i != 6) + return FALSE; + + printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1], + mac[2], mac[3], mac[4], mac[5], tid); + + pEntry = MacTableLookup(pAd, mac); + + if (pEntry) { + printk("\nTear down Rec BA Session: Tid = %d\n", tid); + BARecSessionTearDown(pAd, pEntry->Aid, tid, FALSE); + } + + return TRUE; + } + + return FALSE; + +} + +INT Set_HtBw_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG HtBw; + + HtBw = simple_strtol(arg, 0, 10); + if (HtBw == BW_40) + pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40; + else if (HtBw == BW_20) + pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20; + else + return FALSE; //Invalid argument + + SetCommonHT(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtBw_Proc::(HtBw=%d)\n", pAd->CommonCfg.RegTransmitSetting.field.BW)); + + return TRUE; +} + +INT Set_HtMcs_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG HtMcs, Mcs_tmp; +#ifdef CONFIG_STA_SUPPORT + BOOLEAN bAutoRate = FALSE; +#endif // CONFIG_STA_SUPPORT // + + Mcs_tmp = simple_strtol(arg, 0, 10); + + if (Mcs_tmp <= 15 || Mcs_tmp == 32) + HtMcs = Mcs_tmp; + else + HtMcs = MCS_AUTO; + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { + pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs; + pAd->StaCfg.bAutoTxRateSwitch = (HtMcs == MCS_AUTO) ? TRUE:FALSE; + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMcs_Proc::(HtMcs=%d, bAutoTxRateSwitch = %d)\n", + pAd->StaCfg.DesiredTransmitSetting.field.MCS, pAd->StaCfg.bAutoTxRateSwitch)); + + if ((pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED) || + (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE < MODE_HTMIX)) + { + if ((pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO) && + (HtMcs >= 0 && HtMcs <= 3) && + (pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode == FIXED_TXMODE_CCK)) + { + RTMPSetDesiredRates(pAd, (LONG) (RateIdToMbps[HtMcs] * 1000000)); + } + else if ((pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO) && + (HtMcs >= 0 && HtMcs <= 7) && + (pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode == FIXED_TXMODE_OFDM)) + { + RTMPSetDesiredRates(pAd, (LONG) (RateIdToMbps[HtMcs+4] * 1000000)); + } + else + bAutoRate = TRUE; + + if (bAutoRate) + { + pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO; + RTMPSetDesiredRates(pAd, -1); + } + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMcs_Proc::(FixedTxMode=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode)); + } + if (ADHOC_ON(pAd)) + return TRUE; + } +#endif // CONFIG_STA_SUPPORT // + + SetCommonHT(pAd); + + return TRUE; +} + +INT Set_HtGi_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG HtGi; + + HtGi = simple_strtol(arg, 0, 10); + + if ( HtGi == GI_400) + pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_400; + else if ( HtGi == GI_800 ) + pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_800; + else + return FALSE; //Invalid argument + + SetCommonHT(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtGi_Proc::(ShortGI=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.ShortGI)); + + return TRUE; +} + + +INT Set_HtTxBASize_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + UCHAR Size; + + Size = simple_strtol(arg, 0, 10); + + if (Size <=0 || Size >=64) + { + Size = 8; + } + pAd->CommonCfg.TxBASize = Size-1; + DBGPRINT(RT_DEBUG_ERROR, ("Set_HtTxBASize ::(TxBASize= %d)\n", Size)); + + return TRUE; +} + + +INT Set_HtOpMode_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + + if (Value == HTMODE_GF) + pAd->CommonCfg.RegTransmitSetting.field.HTMODE = HTMODE_GF; + else if ( Value == HTMODE_MM ) + pAd->CommonCfg.RegTransmitSetting.field.HTMODE = HTMODE_MM; + else + return FALSE; //Invalid argument + + SetCommonHT(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtOpMode_Proc::(HtOpMode=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.HTMODE)); + + return TRUE; + +} + +INT Set_HtStbc_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + + if (Value == STBC_USE) + pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_USE; + else if ( Value == STBC_NONE ) + pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_NONE; + else + return FALSE; //Invalid argument + + SetCommonHT(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_Stbc_Proc::(HtStbc=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.STBC)); + + return TRUE; +} + +INT Set_HtHtc_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + if (Value == 0) + pAd->HTCEnable = FALSE; + else if ( Value ==1 ) + pAd->HTCEnable = TRUE; + else + return FALSE; //Invalid argument + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtHtc_Proc::(HtHtc=%d)\n",pAd->HTCEnable)); + + return TRUE; +} + +INT Set_HtExtcha_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + + if (Value == 0) + pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW; + else if ( Value ==1 ) + pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE; + else + return FALSE; //Invalid argument + + SetCommonHT(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtExtcha_Proc::(HtExtcha=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.EXTCHA)); + + return TRUE; +} + +INT Set_HtMpduDensity_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + + if (Value <=7 && Value >= 0) + pAd->CommonCfg.BACapability.field.MpduDensity = Value; + else + pAd->CommonCfg.BACapability.field.MpduDensity = 4; + + SetCommonHT(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMpduDensity_Proc::(HtMpduDensity=%d)\n",pAd->CommonCfg.BACapability.field.MpduDensity)); + + return TRUE; +} + +INT Set_HtBaWinSize_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + + + if (Value >=1 && Value <= 64) + { + pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = Value; + pAd->CommonCfg.BACapability.field.RxBAWinLimit = Value; + } + else + { + pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = 64; + pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64; + } + + SetCommonHT(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtBaWinSize_Proc::(HtBaWinSize=%d)\n",pAd->CommonCfg.BACapability.field.RxBAWinLimit)); + + return TRUE; +} + +INT Set_HtRdg_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + + if (Value == 0) + pAd->CommonCfg.bRdg = FALSE; + else if ( Value ==1 ) + { + pAd->HTCEnable = TRUE; + pAd->CommonCfg.bRdg = TRUE; + } + else + return FALSE; //Invalid argument + + SetCommonHT(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtRdg_Proc::(HtRdg=%d)\n",pAd->CommonCfg.bRdg)); + + return TRUE; +} + +INT Set_HtLinkAdapt_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + if (Value == 0) + pAd->bLinkAdapt = FALSE; + else if ( Value ==1 ) + { + pAd->HTCEnable = TRUE; + pAd->bLinkAdapt = TRUE; + } + else + return FALSE; //Invalid argument + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtLinkAdapt_Proc::(HtLinkAdapt=%d)\n",pAd->bLinkAdapt)); + + return TRUE; +} + +INT Set_HtAmsdu_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + if (Value == 0) + pAd->CommonCfg.BACapability.field.AmsduEnable = FALSE; + else if ( Value == 1 ) + pAd->CommonCfg.BACapability.field.AmsduEnable = TRUE; + else + return FALSE; //Invalid argument + + SetCommonHT(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAmsdu_Proc::(HtAmsdu=%d)\n",pAd->CommonCfg.BACapability.field.AmsduEnable)); + + return TRUE; +} + +INT Set_HtAutoBa_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + if (Value == 0) + pAd->CommonCfg.BACapability.field.AutoBA = FALSE; + else if (Value == 1) + pAd->CommonCfg.BACapability.field.AutoBA = TRUE; + else + return FALSE; //Invalid argument + + pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA; + SetCommonHT(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAutoBa_Proc::(HtAutoBa=%d)\n",pAd->CommonCfg.BACapability.field.AutoBA)); + + return TRUE; + +} + +INT Set_HtProtect_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + if (Value == 0) + pAd->CommonCfg.bHTProtect = FALSE; + else if (Value == 1) + pAd->CommonCfg.bHTProtect = TRUE; + else + return FALSE; //Invalid argument + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtProtect_Proc::(HtProtect=%d)\n",pAd->CommonCfg.bHTProtect)); + + return TRUE; +} + +INT Set_SendPSMPAction_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + UCHAR mac[6], mode; + char *token, sepValue[] = ":", DASH = '-'; + INT i; + MAC_TABLE_ENTRY *pEntry; + + //printk("\n%s\n", arg); +/* + The BARecTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d, + =>The six 2 digit hex-decimal number previous are the Mac address, + =>The seventh decimal number is the mode value. +*/ + if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and mode value in decimal format. + return FALSE; + + token = strchr(arg, DASH); + if ((token != NULL) && (strlen(token)>1)) + { + mode = simple_strtol((token+1), 0, 10); + if (mode > MMPS_ENABLE) + return FALSE; + + *token = '\0'; + for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++) + { + if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1)))) + return FALSE; + AtoH(token, (PUCHAR)(&mac[i]), 1); + } + if(i != 6) + return FALSE; + + printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1], + mac[2], mac[3], mac[4], mac[5], mode); + + pEntry = MacTableLookup(pAd, mac); + + if (pEntry) { + printk("\nSendPSMPAction MIPS mode = %d\n", mode); + SendPSMPAction(pAd, pEntry->Aid, mode); + } + + return TRUE; + } + + return FALSE; + + +} + +INT Set_HtMIMOPSmode_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + + if (Value <=3 && Value >= 0) + pAd->CommonCfg.BACapability.field.MMPSmode = Value; + else + pAd->CommonCfg.BACapability.field.MMPSmode = 3; + + SetCommonHT(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMIMOPSmode_Proc::(MIMOPS mode=%d)\n",pAd->CommonCfg.BACapability.field.MMPSmode)); + + return TRUE; +} + + +INT Set_ForceShortGI_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + if (Value == 0) + pAd->WIFItestbed.bShortGI = FALSE; + else if (Value == 1) + pAd->WIFItestbed.bShortGI = TRUE; + else + return FALSE; //Invalid argument + + SetCommonHT(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_ForceShortGI_Proc::(ForceShortGI=%d)\n", pAd->WIFItestbed.bShortGI)); + + return TRUE; +} + + + +INT Set_ForceGF_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + if (Value == 0) + pAd->WIFItestbed.bGreenField = FALSE; + else if (Value == 1) + pAd->WIFItestbed.bGreenField = TRUE; + else + return FALSE; //Invalid argument + + SetCommonHT(pAd); + + DBGPRINT(RT_DEBUG_TRACE, ("Set_ForceGF_Proc::(ForceGF=%d)\n", pAd->WIFItestbed.bGreenField)); + + return TRUE; +} + +INT Set_HtMimoPs_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + if (Value == 0) + pAd->CommonCfg.bMIMOPSEnable = FALSE; + else if (Value == 1) + pAd->CommonCfg.bMIMOPSEnable = TRUE; + else + return FALSE; //Invalid argument + + DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMimoPs_Proc::(HtMimoPs=%d)\n",pAd->CommonCfg.bMIMOPSEnable)); + + return TRUE; +} +#endif // DOT11_N_SUPPORT // + + +#ifdef DOT11_N_SUPPORT +INT SetCommonHT( + IN PRTMP_ADAPTER pAd) +{ + OID_SET_HT_PHYMODE SetHT; + + if (pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED) + return FALSE; + + SetHT.PhyMode = pAd->CommonCfg.PhyMode; + SetHT.TransmitNo = ((UCHAR)pAd->Antenna.field.TxPath); + SetHT.HtMode = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.HTMODE; + SetHT.ExtOffset = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.EXTCHA; + SetHT.MCS = MCS_AUTO; + SetHT.BW = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.BW; + SetHT.STBC = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.STBC; + SetHT.SHORTGI = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.ShortGI; + + RTMPSetHT(pAd, &SetHT); + + return TRUE; +} +#endif // DOT11_N_SUPPORT // + +INT Set_FixedTxMode_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + UCHAR fix_tx_mode = FIXED_TXMODE_HT; + + if (strcmp(arg, "OFDM") == 0 || strcmp(arg, "ofdm") == 0) + { + fix_tx_mode = FIXED_TXMODE_OFDM; + } + else if (strcmp(arg, "CCK") == 0 || strcmp(arg, "cck") == 0) + { + fix_tx_mode = FIXED_TXMODE_CCK; + } + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode; +#endif // CONFIG_STA_SUPPORT // + + DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode)); + + return TRUE; +} + +#ifdef CONFIG_APSTA_MIXED_SUPPORT +INT Set_OpMode_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + ULONG Value; + + Value = simple_strtol(arg, 0, 10); + +#ifdef RT2870 + if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP)) +#endif // RT2870 // + { + DBGPRINT(RT_DEBUG_ERROR, ("Can not switch operate mode on interface up !! \n")); + return FALSE; + } + + if (Value == 0) + pAd->OpMode = OPMODE_STA; + else if (Value == 1) + pAd->OpMode = OPMODE_AP; + else + return FALSE; //Invalid argument + + DBGPRINT(RT_DEBUG_TRACE, ("Set_OpMode_Proc::(OpMode=%s)\n", pAd->OpMode == 1 ? "AP Mode" : "STA Mode")); + + return TRUE; +} +#endif // CONFIG_APSTA_MIXED_SUPPORT // + + +///////////////////////////////////////////////////////////////////////// +PCHAR RTMPGetRalinkAuthModeStr( + IN NDIS_802_11_AUTHENTICATION_MODE authMode) +{ + switch(authMode) + { + case Ndis802_11AuthModeOpen: + return "OPEN"; + case Ndis802_11AuthModeWPAPSK: + return "WPAPSK"; + case Ndis802_11AuthModeShared: + return "SHARED"; + case Ndis802_11AuthModeWPA: + return "WPA"; + case Ndis802_11AuthModeWPA2: + return "WPA2"; + case Ndis802_11AuthModeWPA2PSK: + return "WPA2PSK"; + case Ndis802_11AuthModeWPA1PSKWPA2PSK: + return "WPAPSKWPA2PSK"; + case Ndis802_11AuthModeWPA1WPA2: + return "WPA1WPA2"; + case Ndis802_11AuthModeWPANone: + return "WPANONE"; + default: + return "UNKNOW"; + } +} + +PCHAR RTMPGetRalinkEncryModeStr( + IN USHORT encryMode) +{ + switch(encryMode) + { + case Ndis802_11WEPDisabled: + return "NONE"; + case Ndis802_11WEPEnabled: + return "WEP"; + case Ndis802_11Encryption2Enabled: + return "TKIP"; + case Ndis802_11Encryption3Enabled: + return "AES"; + case Ndis802_11Encryption4Enabled: + return "TKIPAES"; + default: + return "UNKNOW"; + } +} + +INT RTMPShowCfgValue( + IN PRTMP_ADAPTER pAd, + IN PUCHAR pName, + IN PUCHAR pBuf) +{ + INT Status = 0; + + for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++) + { + if (!strcmp(pName, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name)) + { + if(PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->show_proc(pAd, pBuf)) + Status = -EINVAL; + break; //Exit for loop. + } + } + + if(PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name == NULL) + { + sprintf(pBuf, "\n"); + for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++) + sprintf(pBuf, "%s%s\n", pBuf, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name); + } + + return Status; +} + +INT Show_SSID_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid); +#endif // CONFIG_STA_SUPPORT // + return 0; +} + +INT Show_WirelessMode_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + switch(pAd->CommonCfg.PhyMode) + { + case PHY_11BG_MIXED: + sprintf(pBuf, "\t11B/G"); + break; + case PHY_11B: + sprintf(pBuf, "\t11B"); + break; + case PHY_11A: + sprintf(pBuf, "\t11A"); + break; + case PHY_11ABG_MIXED: + sprintf(pBuf, "\t11A/B/G"); + break; + case PHY_11G: + sprintf(pBuf, "\t11G"); + break; +#ifdef DOT11_N_SUPPORT + case PHY_11ABGN_MIXED: + sprintf(pBuf, "\t11A/B/G/N"); + break; + case PHY_11N_2_4G: + sprintf(pBuf, "\t11N only with 2.4G"); + break; + case PHY_11GN_MIXED: + sprintf(pBuf, "\t11G/N"); + break; + case PHY_11AN_MIXED: + sprintf(pBuf, "\t11A/N"); + break; + case PHY_11BGN_MIXED: + sprintf(pBuf, "\t11B/G/N"); + break; + case PHY_11AGN_MIXED: + sprintf(pBuf, "\t11A/G/N"); + break; + case PHY_11N_5G: + sprintf(pBuf, "\t11N only with 5G"); + break; +#endif // DOT11_N_SUPPORT // + default: + sprintf(pBuf, "\tUnknow Value(%d)", pAd->CommonCfg.PhyMode); + break; + } + return 0; +} + + +INT Show_TxBurst_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%s", pAd->CommonCfg.bEnableTxBurst ? "TRUE":"FALSE"); + return 0; +} + +INT Show_TxPreamble_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + switch(pAd->CommonCfg.TxPreamble) + { + case Rt802_11PreambleShort: + sprintf(pBuf, "\tShort"); + break; + case Rt802_11PreambleLong: + sprintf(pBuf, "\tLong"); + break; + case Rt802_11PreambleAuto: + sprintf(pBuf, "\tAuto"); + break; + default: + sprintf(pBuf, "\tUnknow Value(%lu)", pAd->CommonCfg.TxPreamble); + break; + } + + return 0; +} + +INT Show_TxPower_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%lu", pAd->CommonCfg.TxPowerPercentage); + return 0; +} + +INT Show_Channel_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%d", pAd->CommonCfg.Channel); + return 0; +} + +INT Show_BGProtection_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + switch(pAd->CommonCfg.UseBGProtection) + { + case 1: //Always On + sprintf(pBuf, "\tON"); + break; + case 2: //Always OFF + sprintf(pBuf, "\tOFF"); + break; + case 0: //AUTO + sprintf(pBuf, "\tAuto"); + break; + default: + sprintf(pBuf, "\tUnknow Value(%lu)", pAd->CommonCfg.UseBGProtection); + break; + } + return 0; +} + +INT Show_RTSThreshold_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%u", pAd->CommonCfg.RtsThreshold); + return 0; +} + +INT Show_FragThreshold_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%u", pAd->CommonCfg.FragmentThreshold); + return 0; +} + +#ifdef DOT11_N_SUPPORT +INT Show_HtBw_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + if (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40) + { + sprintf(pBuf, "\t40 MHz"); + } + else + { + sprintf(pBuf, "\t20 MHz"); + } + return 0; +} + +INT Show_HtMcs_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS); +#endif // CONFIG_STA_SUPPORT // + return 0; +} + +INT Show_HtGi_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + switch(pAd->CommonCfg.RegTransmitSetting.field.ShortGI) + { + case GI_400: + sprintf(pBuf, "\tGI_400"); + break; + case GI_800: + sprintf(pBuf, "\tGI_800"); + break; + default: + sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.ShortGI); + break; + } + return 0; +} + +INT Show_HtOpMode_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + switch(pAd->CommonCfg.RegTransmitSetting.field.HTMODE) + { + case HTMODE_GF: + sprintf(pBuf, "\tGF"); + break; + case HTMODE_MM: + sprintf(pBuf, "\tMM"); + break; + default: + sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.HTMODE); + break; + } + return 0; +} + +INT Show_HtExtcha_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + switch(pAd->CommonCfg.RegTransmitSetting.field.EXTCHA) + { + case EXTCHA_BELOW: + sprintf(pBuf, "\tBelow"); + break; + case EXTCHA_ABOVE: + sprintf(pBuf, "\tAbove"); + break; + default: + sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.EXTCHA); + break; + } + return 0; +} + + +INT Show_HtMpduDensity_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%u", pAd->CommonCfg.BACapability.field.MpduDensity); + return 0; +} + +INT Show_HtBaWinSize_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%u", pAd->CommonCfg.BACapability.field.RxBAWinLimit); + return 0; +} + +INT Show_HtRdg_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%s", pAd->CommonCfg.bRdg ? "TRUE":"FALSE"); + return 0; +} + +INT Show_HtAmsdu_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AmsduEnable ? "TRUE":"FALSE"); + return 0; +} + +INT Show_HtAutoBa_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AutoBA ? "TRUE":"FALSE"); + return 0; +} +#endif // DOT11_N_SUPPORT // + +INT Show_CountryRegion_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%d", pAd->CommonCfg.CountryRegion); + return 0; +} + +INT Show_CountryRegionABand_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%d", pAd->CommonCfg.CountryRegionForABand); + return 0; +} + +INT Show_CountryCode_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%s", pAd->CommonCfg.CountryCode); + return 0; +} + +#ifdef AGGREGATION_SUPPORT +INT Show_PktAggregate_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%s", pAd->CommonCfg.bAggregationCapable ? "TRUE":"FALSE"); + return 0; +} +#endif // AGGREGATION_SUPPORT // + +#ifdef WMM_SUPPORT +INT Show_WmmCapable_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE"); +#endif // CONFIG_STA_SUPPORT // + + return 0; +} +#endif // WMM_SUPPORT // + +INT Show_IEEE80211H_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + sprintf(pBuf, "\t%s", pAd->CommonCfg.bIEEE80211H ? "TRUE":"FALSE"); + return 0; +} + +#ifdef CONFIG_STA_SUPPORT +INT Show_NetworkType_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + switch(pAd->StaCfg.BssType) + { + case BSS_ADHOC: + sprintf(pBuf, "\tAdhoc"); + break; + case BSS_INFRA: + sprintf(pBuf, "\tInfra"); + break; + case BSS_ANY: + sprintf(pBuf, "\tAny"); + break; + case BSS_MONITOR: + sprintf(pBuf, "\tMonitor"); + break; + default: + sprintf(pBuf, "\tUnknow Value(%d)", pAd->StaCfg.BssType); + break; + } + return 0; +} +#endif // CONFIG_STA_SUPPORT // + +INT Show_AuthMode_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + NDIS_802_11_AUTHENTICATION_MODE AuthMode = Ndis802_11AuthModeOpen; + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + AuthMode = pAd->StaCfg.AuthMode; +#endif // CONFIG_STA_SUPPORT // + + if ((AuthMode >= Ndis802_11AuthModeOpen) && + (AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK)) + sprintf(pBuf, "\t%s", RTMPGetRalinkAuthModeStr(AuthMode)); + else + sprintf(pBuf, "\tUnknow Value(%d)", AuthMode); + + return 0; +} + +INT Show_EncrypType_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + NDIS_802_11_WEP_STATUS WepStatus = Ndis802_11WEPDisabled; + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + WepStatus = pAd->StaCfg.WepStatus; +#endif // CONFIG_STA_SUPPORT // + + if ((WepStatus >= Ndis802_11WEPEnabled) && + (WepStatus <= Ndis802_11Encryption4KeyAbsent)) + sprintf(pBuf, "\t%s", RTMPGetRalinkEncryModeStr(WepStatus)); + else + sprintf(pBuf, "\tUnknow Value(%d)", WepStatus); + + return 0; +} + +INT Show_DefaultKeyID_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + UCHAR DefaultKeyId = 0; + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + DefaultKeyId = pAd->StaCfg.DefaultKeyId; +#endif // CONFIG_STA_SUPPORT // + + sprintf(pBuf, "\t%d", DefaultKeyId); + + return 0; +} + +INT Show_WepKey_Proc( + IN PRTMP_ADAPTER pAd, + IN INT KeyIdx, + OUT PUCHAR pBuf) +{ + UCHAR Key[16] = {0}, KeyLength = 0; + INT index = BSS0; + + KeyLength = pAd->SharedKey[index][KeyIdx].KeyLen; + NdisMoveMemory(Key, pAd->SharedKey[index][KeyIdx].Key, KeyLength); + + //check key string is ASCII or not + if (RTMPCheckStrPrintAble(Key, KeyLength)) + sprintf(pBuf, "\t%s", Key); + else + { + int idx; + sprintf(pBuf, "\t"); + for (idx = 0; idx < KeyLength; idx++) + sprintf(pBuf+strlen(pBuf), "%02X", Key[idx]); + } + return 0; +} + +INT Show_Key1_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + Show_WepKey_Proc(pAd, 0, pBuf); + return 0; +} + +INT Show_Key2_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + Show_WepKey_Proc(pAd, 1, pBuf); + return 0; +} + +INT Show_Key3_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + Show_WepKey_Proc(pAd, 2, pBuf); + return 0; +} + +INT Show_Key4_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + Show_WepKey_Proc(pAd, 3, pBuf); + return 0; +} + +INT Show_WPAPSK_Proc( + IN PRTMP_ADAPTER pAd, + OUT PUCHAR pBuf) +{ + INT idx; + UCHAR PMK[32] = {0}; + + +#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32); +#endif // CONFIG_STA_SUPPORT // + + sprintf(pBuf, "\tPMK = "); + for (idx = 0; idx < 32; idx++) + sprintf(pBuf+strlen(pBuf), "%02X", PMK[idx]); + + return 0; +} + |