diff options
Diffstat (limited to 'drivers/staging/rt2870/common/mlme.c')
-rw-r--r-- | drivers/staging/rt2870/common/mlme.c | 8610 |
1 files changed, 1 insertions, 8609 deletions
diff --git a/drivers/staging/rt2870/common/mlme.c b/drivers/staging/rt2870/common/mlme.c index 8a82cee8bf26..f88040abd26b 100644 --- a/drivers/staging/rt2870/common/mlme.c +++ b/drivers/staging/rt2870/common/mlme.c @@ -1,8609 +1 @@ -/* - ************************************************************************* - * Ralink Tech Inc. - * 5F., No.36, Taiyuan St., Jhubei City, - * Hsinchu County 302, - * Taiwan, R.O.C. - * - * (c) Copyright 2002-2007, Ralink Technology, Inc. - * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - ************************************************************************* - - Module Name: - mlme.c - - Abstract: - - Revision History: - Who When What - -------- ---------- ---------------------------------------------- - John Chang 2004-08-25 Modify from RT2500 code base - John Chang 2004-09-06 modified for RT2600 -*/ - -#include "../rt_config.h" -#include <stdarg.h> - -UCHAR CISCO_OUI[] = {0x00, 0x40, 0x96}; - -UCHAR WPA_OUI[] = {0x00, 0x50, 0xf2, 0x01}; -UCHAR RSN_OUI[] = {0x00, 0x0f, 0xac}; -UCHAR WAPI_OUI[] = {0x00, 0x14, 0x72}; -UCHAR WME_INFO_ELEM[] = {0x00, 0x50, 0xf2, 0x02, 0x00, 0x01}; -UCHAR WME_PARM_ELEM[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01}; -UCHAR Ccx2QosInfo[] = {0x00, 0x40, 0x96, 0x04}; -UCHAR RALINK_OUI[] = {0x00, 0x0c, 0x43}; -UCHAR BROADCOM_OUI[] = {0x00, 0x90, 0x4c}; -UCHAR WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04}; -#ifdef CONFIG_STA_SUPPORT -#ifdef DOT11_N_SUPPORT -UCHAR PRE_N_HT_OUI[] = {0x00, 0x90, 0x4c}; -#endif // DOT11_N_SUPPORT // -#endif // CONFIG_STA_SUPPORT // - -UCHAR RateSwitchTable[] = { -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x11, 0x00, 0, 0, 0, // Initial used item after association - 0x00, 0x00, 0, 40, 101, - 0x01, 0x00, 1, 40, 50, - 0x02, 0x00, 2, 35, 45, - 0x03, 0x00, 3, 20, 45, - 0x04, 0x21, 0, 30, 50, - 0x05, 0x21, 1, 20, 50, - 0x06, 0x21, 2, 20, 50, - 0x07, 0x21, 3, 15, 50, - 0x08, 0x21, 4, 15, 30, - 0x09, 0x21, 5, 10, 25, - 0x0a, 0x21, 6, 8, 25, - 0x0b, 0x21, 7, 8, 25, - 0x0c, 0x20, 12, 15, 30, - 0x0d, 0x20, 13, 8, 20, - 0x0e, 0x20, 14, 8, 20, - 0x0f, 0x20, 15, 8, 25, - 0x10, 0x22, 15, 8, 25, - 0x11, 0x00, 0, 0, 0, - 0x12, 0x00, 0, 0, 0, - 0x13, 0x00, 0, 0, 0, - 0x14, 0x00, 0, 0, 0, - 0x15, 0x00, 0, 0, 0, - 0x16, 0x00, 0, 0, 0, - 0x17, 0x00, 0, 0, 0, - 0x18, 0x00, 0, 0, 0, - 0x19, 0x00, 0, 0, 0, - 0x1a, 0x00, 0, 0, 0, - 0x1b, 0x00, 0, 0, 0, - 0x1c, 0x00, 0, 0, 0, - 0x1d, 0x00, 0, 0, 0, - 0x1e, 0x00, 0, 0, 0, - 0x1f, 0x00, 0, 0, 0, -}; - -UCHAR RateSwitchTable11B[] = { -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x04, 0x03, 0, 0, 0, // Initial used item after association - 0x00, 0x00, 0, 40, 101, - 0x01, 0x00, 1, 40, 50, - 0x02, 0x00, 2, 35, 45, - 0x03, 0x00, 3, 20, 45, -}; - -UCHAR RateSwitchTable11BG[] = { -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x0a, 0x00, 0, 0, 0, // Initial used item after association - 0x00, 0x00, 0, 40, 101, - 0x01, 0x00, 1, 40, 50, - 0x02, 0x00, 2, 35, 45, - 0x03, 0x00, 3, 20, 45, - 0x04, 0x10, 2, 20, 35, - 0x05, 0x10, 3, 16, 35, - 0x06, 0x10, 4, 10, 25, - 0x07, 0x10, 5, 16, 25, - 0x08, 0x10, 6, 10, 25, - 0x09, 0x10, 7, 10, 13, -}; - -UCHAR RateSwitchTable11G[] = { -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x08, 0x00, 0, 0, 0, // Initial used item after association - 0x00, 0x10, 0, 20, 101, - 0x01, 0x10, 1, 20, 35, - 0x02, 0x10, 2, 20, 35, - 0x03, 0x10, 3, 16, 35, - 0x04, 0x10, 4, 10, 25, - 0x05, 0x10, 5, 16, 25, - 0x06, 0x10, 6, 10, 25, - 0x07, 0x10, 7, 10, 13, -}; - -#ifdef DOT11_N_SUPPORT -UCHAR RateSwitchTable11N1S[] = { -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x09, 0x00, 0, 0, 0, // Initial used item after association - 0x00, 0x21, 0, 30, 101, - 0x01, 0x21, 1, 20, 50, - 0x02, 0x21, 2, 20, 50, - 0x03, 0x21, 3, 15, 50, - 0x04, 0x21, 4, 15, 30, - 0x05, 0x21, 5, 10, 25, - 0x06, 0x21, 6, 8, 14, - 0x07, 0x21, 7, 8, 14, - 0x08, 0x23, 7, 8, 14, -}; - -UCHAR RateSwitchTable11N2S[] = { -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x0a, 0x00, 0, 0, 0, // Initial used item after association - 0x00, 0x21, 0, 30, 101, - 0x01, 0x21, 1, 20, 50, - 0x02, 0x21, 2, 20, 50, - 0x03, 0x21, 3, 15, 50, - 0x04, 0x21, 4, 15, 30, - 0x05, 0x20, 12, 15, 30, - 0x06, 0x20, 13, 8, 20, - 0x07, 0x20, 14, 8, 20, - 0x08, 0x20, 15, 8, 25, - 0x09, 0x22, 15, 8, 25, -}; - -UCHAR RateSwitchTable11N3S[] = { -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x0a, 0x00, 0, 0, 0, // Initial used item after association - 0x00, 0x21, 0, 30, 101, - 0x01, 0x21, 1, 20, 50, - 0x02, 0x21, 2, 20, 50, - 0x03, 0x21, 3, 15, 50, - 0x04, 0x21, 4, 15, 30, - 0x05, 0x20, 12, 15, 30, - 0x06, 0x20, 13, 8, 20, - 0x07, 0x20, 14, 8, 20, - 0x08, 0x20, 15, 8, 25, - 0x09, 0x22, 15, 8, 25, -}; - -UCHAR RateSwitchTable11N2SForABand[] = { -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x0b, 0x09, 0, 0, 0, // Initial used item after association - 0x00, 0x21, 0, 30, 101, - 0x01, 0x21, 1, 20, 50, - 0x02, 0x21, 2, 20, 50, - 0x03, 0x21, 3, 15, 50, - 0x04, 0x21, 4, 15, 30, - 0x05, 0x21, 5, 15, 30, - 0x06, 0x20, 12, 15, 30, - 0x07, 0x20, 13, 8, 20, - 0x08, 0x20, 14, 8, 20, - 0x09, 0x20, 15, 8, 25, - 0x0a, 0x22, 15, 8, 25, -}; - -UCHAR RateSwitchTable11N3SForABand[] = { // 3*3 -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x0b, 0x09, 0, 0, 0, // Initial used item after association - 0x00, 0x21, 0, 30, 101, - 0x01, 0x21, 1, 20, 50, - 0x02, 0x21, 2, 20, 50, - 0x03, 0x21, 3, 15, 50, - 0x04, 0x21, 4, 15, 30, - 0x05, 0x21, 5, 15, 30, - 0x06, 0x20, 12, 15, 30, - 0x07, 0x20, 13, 8, 20, - 0x08, 0x20, 14, 8, 20, - 0x09, 0x20, 15, 8, 25, - 0x0a, 0x22, 15, 8, 25, -}; - -UCHAR RateSwitchTable11BGN1S[] = { -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x0d, 0x00, 0, 0, 0, // Initial used item after association - 0x00, 0x00, 0, 40, 101, - 0x01, 0x00, 1, 40, 50, - 0x02, 0x00, 2, 35, 45, - 0x03, 0x00, 3, 20, 45, - 0x04, 0x21, 0, 30,101, //50 - 0x05, 0x21, 1, 20, 50, - 0x06, 0x21, 2, 20, 50, - 0x07, 0x21, 3, 15, 50, - 0x08, 0x21, 4, 15, 30, - 0x09, 0x21, 5, 10, 25, - 0x0a, 0x21, 6, 8, 14, - 0x0b, 0x21, 7, 8, 14, - 0x0c, 0x23, 7, 8, 14, -}; - -UCHAR RateSwitchTable11BGN2S[] = { -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x0a, 0x00, 0, 0, 0, // Initial used item after association - 0x00, 0x21, 0, 30,101, //50 - 0x01, 0x21, 1, 20, 50, - 0x02, 0x21, 2, 20, 50, - 0x03, 0x21, 3, 15, 50, - 0x04, 0x21, 4, 15, 30, - 0x05, 0x20, 12, 15, 30, - 0x06, 0x20, 13, 8, 20, - 0x07, 0x20, 14, 8, 20, - 0x08, 0x20, 15, 8, 25, - 0x09, 0x22, 15, 8, 25, -}; - -UCHAR RateSwitchTable11BGN3S[] = { // 3*3 -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x0a, 0x00, 0, 0, 0, // Initial used item after association - 0x00, 0x21, 0, 30,101, //50 - 0x01, 0x21, 1, 20, 50, - 0x02, 0x21, 2, 20, 50, - 0x03, 0x21, 3, 20, 50, - 0x04, 0x21, 4, 15, 50, -#if 1 - 0x05, 0x20, 20, 15, 30, - 0x06, 0x20, 21, 8, 20, - 0x07, 0x20, 22, 8, 20, - 0x08, 0x20, 23, 8, 25, - 0x09, 0x22, 23, 8, 25, -#else // for RT2860 2*3 test - 0x05, 0x20, 12, 15, 30, - 0x06, 0x20, 13, 8, 20, - 0x07, 0x20, 14, 8, 20, - 0x08, 0x20, 15, 8, 25, - 0x09, 0x22, 15, 8, 25, -#endif -}; - -UCHAR RateSwitchTable11BGN2SForABand[] = { -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x0b, 0x09, 0, 0, 0, // Initial used item after association - 0x00, 0x21, 0, 30,101, //50 - 0x01, 0x21, 1, 20, 50, - 0x02, 0x21, 2, 20, 50, - 0x03, 0x21, 3, 15, 50, - 0x04, 0x21, 4, 15, 30, - 0x05, 0x21, 5, 15, 30, - 0x06, 0x20, 12, 15, 30, - 0x07, 0x20, 13, 8, 20, - 0x08, 0x20, 14, 8, 20, - 0x09, 0x20, 15, 8, 25, - 0x0a, 0x22, 15, 8, 25, -}; - -UCHAR RateSwitchTable11BGN3SForABand[] = { // 3*3 -// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) - 0x0c, 0x09, 0, 0, 0, // Initial used item after association - 0x00, 0x21, 0, 30,101, //50 - 0x01, 0x21, 1, 20, 50, - 0x02, 0x21, 2, 20, 50, - 0x03, 0x21, 3, 15, 50, - 0x04, 0x21, 4, 15, 30, - 0x05, 0x21, 5, 15, 30, - 0x06, 0x21, 12, 15, 30, - 0x07, 0x20, 20, 15, 30, - 0x08, 0x20, 21, 8, 20, - 0x09, 0x20, 22, 8, 20, - 0x0a, 0x20, 23, 8, 25, - 0x0b, 0x22, 23, 8, 25, -}; -#endif // DOT11_N_SUPPORT // - -PUCHAR ReasonString[] = { - /* 0 */ "Reserved", - /* 1 */ "Unspecified Reason", - /* 2 */ "Previous Auth no longer valid", - /* 3 */ "STA is leaving / has left", - /* 4 */ "DIS-ASSOC due to inactivity", - /* 5 */ "AP unable to hanle all associations", - /* 6 */ "class 2 error", - /* 7 */ "class 3 error", - /* 8 */ "STA is leaving / has left", - /* 9 */ "require auth before assoc/re-assoc", - /* 10 */ "Reserved", - /* 11 */ "Reserved", - /* 12 */ "Reserved", - /* 13 */ "invalid IE", - /* 14 */ "MIC error", - /* 15 */ "4-way handshake timeout", - /* 16 */ "2-way (group key) handshake timeout", - /* 17 */ "4-way handshake IE diff among AssosReq/Rsp/Beacon", - /* 18 */ -}; - -extern UCHAR OfdmRateToRxwiMCS[]; -// since RT61 has better RX sensibility, we have to limit TX ACK rate not to exceed our normal data TX rate. -// otherwise the WLAN peer may not be able to receive the ACK thus downgrade its data TX rate -ULONG BasicRateMask[12] = {0xfffff001 /* 1-Mbps */, 0xfffff003 /* 2 Mbps */, 0xfffff007 /* 5.5 */, 0xfffff00f /* 11 */, - 0xfffff01f /* 6 */ , 0xfffff03f /* 9 */ , 0xfffff07f /* 12 */ , 0xfffff0ff /* 18 */, - 0xfffff1ff /* 24 */ , 0xfffff3ff /* 36 */ , 0xfffff7ff /* 48 */ , 0xffffffff /* 54 */}; - -UCHAR MULTICAST_ADDR[MAC_ADDR_LEN] = {0x1, 0x00, 0x00, 0x00, 0x00, 0x00}; -UCHAR BROADCAST_ADDR[MAC_ADDR_LEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; -UCHAR ZERO_MAC_ADDR[MAC_ADDR_LEN] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; - -// e.g. RssiSafeLevelForTxRate[RATE_36]" means if the current RSSI is greater than -// this value, then it's quaranteed capable of operating in 36 mbps TX rate in -// clean environment. -// TxRate: 1 2 5.5 11 6 9 12 18 24 36 48 54 72 100 -CHAR RssiSafeLevelForTxRate[] ={ -92, -91, -90, -87, -88, -86, -85, -83, -81, -78, -72, -71, -40, -40 }; - -UCHAR RateIdToMbps[] = { 1, 2, 5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 72, 100}; -USHORT RateIdTo500Kbps[] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108, 144, 200}; - -UCHAR SsidIe = IE_SSID; -UCHAR SupRateIe = IE_SUPP_RATES; -UCHAR ExtRateIe = IE_EXT_SUPP_RATES; -#ifdef DOT11_N_SUPPORT -UCHAR HtCapIe = IE_HT_CAP; -UCHAR AddHtInfoIe = IE_ADD_HT; -UCHAR NewExtChanIe = IE_SECONDARY_CH_OFFSET; -#ifdef DOT11N_DRAFT3 -UCHAR ExtHtCapIe = IE_EXT_CAPABILITY; -#endif // DOT11N_DRAFT3 // -#endif // DOT11_N_SUPPORT // -UCHAR ErpIe = IE_ERP; -UCHAR DsIe = IE_DS_PARM; -UCHAR TimIe = IE_TIM; -UCHAR WpaIe = IE_WPA; -UCHAR Wpa2Ie = IE_WPA2; -UCHAR IbssIe = IE_IBSS_PARM; -UCHAR Ccx2Ie = IE_CCX_V2; -UCHAR WapiIe = IE_WAPI; - -extern UCHAR WPA_OUI[]; - -UCHAR SES_OUI[] = {0x00, 0x90, 0x4c}; - -UCHAR ZeroSsid[32] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}; - -// Reset the RFIC setting to new series -RTMP_RF_REGS RF2850RegTable[] = { -// ch R1 R2 R3(TX0~4=0) R4 - {1, 0x98402ecc, 0x984c0786, 0x9816b455, 0x9800510b}, - {2, 0x98402ecc, 0x984c0786, 0x98168a55, 0x9800519f}, - {3, 0x98402ecc, 0x984c078a, 0x98168a55, 0x9800518b}, - {4, 0x98402ecc, 0x984c078a, 0x98168a55, 0x9800519f}, - {5, 0x98402ecc, 0x984c078e, 0x98168a55, 0x9800518b}, - {6, 0x98402ecc, 0x984c078e, 0x98168a55, 0x9800519f}, - {7, 0x98402ecc, 0x984c0792, 0x98168a55, 0x9800518b}, - {8, 0x98402ecc, 0x984c0792, 0x98168a55, 0x9800519f}, - {9, 0x98402ecc, 0x984c0796, 0x98168a55, 0x9800518b}, - {10, 0x98402ecc, 0x984c0796, 0x98168a55, 0x9800519f}, - {11, 0x98402ecc, 0x984c079a, 0x98168a55, 0x9800518b}, - {12, 0x98402ecc, 0x984c079a, 0x98168a55, 0x9800519f}, - {13, 0x98402ecc, 0x984c079e, 0x98168a55, 0x9800518b}, - {14, 0x98402ecc, 0x984c07a2, 0x98168a55, 0x98005193}, - - // 802.11 UNI / HyperLan 2 - {36, 0x98402ecc, 0x984c099a, 0x98158a55, 0x980ed1a3}, - {38, 0x98402ecc, 0x984c099e, 0x98158a55, 0x980ed193}, - {40, 0x98402ec8, 0x984c0682, 0x98158a55, 0x980ed183}, - {44, 0x98402ec8, 0x984c0682, 0x98158a55, 0x980ed1a3}, - {46, 0x98402ec8, 0x984c0686, 0x98158a55, 0x980ed18b}, - {48, 0x98402ec8, 0x984c0686, 0x98158a55, 0x980ed19b}, - {52, 0x98402ec8, 0x984c068a, 0x98158a55, 0x980ed193}, - {54, 0x98402ec8, 0x984c068a, 0x98158a55, 0x980ed1a3}, - {56, 0x98402ec8, 0x984c068e, 0x98158a55, 0x980ed18b}, - {60, 0x98402ec8, 0x984c0692, 0x98158a55, 0x980ed183}, - {62, 0x98402ec8, 0x984c0692, 0x98158a55, 0x980ed193}, - {64, 0x98402ec8, 0x984c0692, 0x98158a55, 0x980ed1a3}, // Plugfest#4, Day4, change RFR3 left4th 9->5. - - // 802.11 HyperLan 2 - {100, 0x98402ec8, 0x984c06b2, 0x98178a55, 0x980ed783}, - - // 2008.04.30 modified - // The system team has AN to improve the EVM value - // for channel 102 to 108 for the RT2850/RT2750 dual band solution. - {102, 0x98402ec8, 0x985c06b2, 0x98578a55, 0x980ed793}, - {104, 0x98402ec8, 0x985c06b2, 0x98578a55, 0x980ed1a3}, - {108, 0x98402ecc, 0x985c0a32, 0x98578a55, 0x980ed193}, - - {110, 0x98402ecc, 0x984c0a36, 0x98178a55, 0x980ed183}, - {112, 0x98402ecc, 0x984c0a36, 0x98178a55, 0x980ed19b}, - {116, 0x98402ecc, 0x984c0a3a, 0x98178a55, 0x980ed1a3}, - {118, 0x98402ecc, 0x984c0a3e, 0x98178a55, 0x980ed193}, - {120, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed183}, - {124, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed193}, - {126, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed15b}, // 0x980ed1bb->0x980ed15b required by Rory 20070927 - {128, 0x98402ec4, 0x984c0382, 0x98178a55, 0x980ed1a3}, - {132, 0x98402ec4, 0x984c0386, 0x98178a55, 0x980ed18b}, - {134, 0x98402ec4, 0x984c0386, 0x98178a55, 0x980ed193}, - {136, 0x98402ec4, 0x984c0386, 0x98178a55, 0x980ed19b}, - {140, 0x98402ec4, 0x984c038a, 0x98178a55, 0x980ed183}, - - // 802.11 UNII - {149, 0x98402ec4, 0x984c038a, 0x98178a55, 0x980ed1a7}, - {151, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed187}, - {153, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed18f}, - {157, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed19f}, - {159, 0x98402ec4, 0x984c038e, 0x98178a55, 0x980ed1a7}, - {161, 0x98402ec4, 0x984c0392, 0x98178a55, 0x980ed187}, - {165, 0x98402ec4, 0x984c0392, 0x98178a55, 0x980ed197}, - - // Japan - {184, 0x95002ccc, 0x9500491e, 0x9509be55, 0x950c0a0b}, - {188, 0x95002ccc, 0x95004922, 0x9509be55, 0x950c0a13}, - {192, 0x95002ccc, 0x95004926, 0x9509be55, 0x950c0a1b}, - {196, 0x95002ccc, 0x9500492a, 0x9509be55, 0x950c0a23}, - {208, 0x95002ccc, 0x9500493a, 0x9509be55, 0x950c0a13}, - {212, 0x95002ccc, 0x9500493e, 0x9509be55, 0x950c0a1b}, - {216, 0x95002ccc, 0x95004982, 0x9509be55, 0x950c0a23}, - - // still lack of MMAC(Japan) ch 34,38,42,46 -}; -UCHAR NUM_OF_2850_CHNL = (sizeof(RF2850RegTable) / sizeof(RTMP_RF_REGS)); - -FREQUENCY_ITEM FreqItems3020[] = -{ - /**************************************************/ - // ISM : 2.4 to 2.483 GHz // - /**************************************************/ - // 11g - /**************************************************/ - //-CH---N-------R---K----------- - {1, 241, 2, 2}, - {2, 241, 2, 7}, - {3, 242, 2, 2}, - {4, 242, 2, 7}, - {5, 243, 2, 2}, - {6, 243, 2, 7}, - {7, 244, 2, 2}, - {8, 244, 2, 7}, - {9, 245, 2, 2}, - {10, 245, 2, 7}, - {11, 246, 2, 2}, - {12, 246, 2, 7}, - {13, 247, 2, 2}, - {14, 248, 2, 4}, -}; -#define NUM_OF_3020_CHNL (sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM)) - -/* - ========================================================================== - Description: - initialize the MLME task and its data structure (queue, spinlock, - timer, state machines). - - IRQL = PASSIVE_LEVEL - - Return: - always return NDIS_STATUS_SUCCESS - - ========================================================================== -*/ -NDIS_STATUS MlmeInit( - IN PRTMP_ADAPTER pAd) -{ - NDIS_STATUS Status = NDIS_STATUS_SUCCESS; - - DBGPRINT(RT_DEBUG_TRACE, ("--> MLME Initialize\n")); - - do - { - Status = MlmeQueueInit(&pAd->Mlme.Queue); - if(Status != NDIS_STATUS_SUCCESS) - break; - - pAd->Mlme.bRunning = FALSE; - NdisAllocateSpinLock(&pAd->Mlme.TaskLock); - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - BssTableInit(&pAd->ScanTab); - - // init STA state machines - AssocStateMachineInit(pAd, &pAd->Mlme.AssocMachine, pAd->Mlme.AssocFunc); - AuthStateMachineInit(pAd, &pAd->Mlme.AuthMachine, pAd->Mlme.AuthFunc); - AuthRspStateMachineInit(pAd, &pAd->Mlme.AuthRspMachine, pAd->Mlme.AuthRspFunc); - SyncStateMachineInit(pAd, &pAd->Mlme.SyncMachine, pAd->Mlme.SyncFunc); - WpaPskStateMachineInit(pAd, &pAd->Mlme.WpaPskMachine, pAd->Mlme.WpaPskFunc); - AironetStateMachineInit(pAd, &pAd->Mlme.AironetMachine, pAd->Mlme.AironetFunc); - -#ifdef QOS_DLS_SUPPORT - DlsStateMachineInit(pAd, &pAd->Mlme.DlsMachine, pAd->Mlme.DlsFunc); -#endif // QOS_DLS_SUPPORT // - - - // Since we are using switch/case to implement it, the init is different from the above - // state machine init - MlmeCntlInit(pAd, &pAd->Mlme.CntlMachine, NULL); - } -#endif // CONFIG_STA_SUPPORT // - - - - ActionStateMachineInit(pAd, &pAd->Mlme.ActMachine, pAd->Mlme.ActFunc); - - // Init mlme periodic timer - RTMPInitTimer(pAd, &pAd->Mlme.PeriodicTimer, GET_TIMER_FUNCTION(MlmePeriodicExec), pAd, TRUE); - - // Set mlme periodic timer - RTMPSetTimer(&pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV); - - // software-based RX Antenna diversity - RTMPInitTimer(pAd, &pAd->Mlme.RxAntEvalTimer, GET_TIMER_FUNCTION(AsicRxAntEvalTimeout), pAd, FALSE); - - } while (FALSE); - - DBGPRINT(RT_DEBUG_TRACE, ("<-- MLME Initialize\n")); - - return Status; -} - -/* - ========================================================================== - Description: - main loop of the MLME - Pre: - Mlme has to be initialized, and there are something inside the queue - Note: - This function is invoked from MPSetInformation and MPReceive; - This task guarantee only one MlmeHandler will run. - - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID MlmeHandler( - IN PRTMP_ADAPTER pAd) -{ - MLME_QUEUE_ELEM *Elem = NULL; -#ifdef APCLI_SUPPORT - SHORT apcliIfIndex; -#endif - - // Only accept MLME and Frame from peer side, no other (control/data) frame should - // get into this state machine - - NdisAcquireSpinLock(&pAd->Mlme.TaskLock); - if(pAd->Mlme.bRunning) - { - NdisReleaseSpinLock(&pAd->Mlme.TaskLock); - return; - } - else - { - pAd->Mlme.bRunning = TRUE; - } - NdisReleaseSpinLock(&pAd->Mlme.TaskLock); - - while (!MlmeQueueEmpty(&pAd->Mlme.Queue)) - { - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS) || - RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS) || - RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) - { - DBGPRINT(RT_DEBUG_TRACE, ("Device Halted or Removed or MlmeRest, exit MlmeHandler! (queue num = %ld)\n", pAd->Mlme.Queue.Num)); - break; - } - -#ifdef RALINK_ATE - if(ATE_ON(pAd)) - { - DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now in MlmeHandler\n")); - break; - } -#endif // RALINK_ATE // - - //From message type, determine which state machine I should drive - if (MlmeDequeue(&pAd->Mlme.Queue, &Elem)) - { -#ifdef RT2870 - if (Elem->MsgType == MT2_RESET_CONF) - { - DBGPRINT_RAW(RT_DEBUG_TRACE, ("!!! reset MLME state machine !!!\n")); - MlmeRestartStateMachine(pAd); - Elem->Occupied = FALSE; - Elem->MsgLen = 0; - continue; - } -#endif // RT2870 // - - // if dequeue success - switch (Elem->Machine) - { - // STA state machines -#ifdef CONFIG_STA_SUPPORT - case ASSOC_STATE_MACHINE: - StateMachinePerformAction(pAd, &pAd->Mlme.AssocMachine, Elem); - break; - case AUTH_STATE_MACHINE: - StateMachinePerformAction(pAd, &pAd->Mlme.AuthMachine, Elem); - break; - case AUTH_RSP_STATE_MACHINE: - StateMachinePerformAction(pAd, &pAd->Mlme.AuthRspMachine, Elem); - break; - case SYNC_STATE_MACHINE: - StateMachinePerformAction(pAd, &pAd->Mlme.SyncMachine, Elem); - break; - case MLME_CNTL_STATE_MACHINE: - MlmeCntlMachinePerformAction(pAd, &pAd->Mlme.CntlMachine, Elem); - break; - case WPA_PSK_STATE_MACHINE: - StateMachinePerformAction(pAd, &pAd->Mlme.WpaPskMachine, Elem); - break; -#ifdef LEAP_SUPPORT - case LEAP_STATE_MACHINE: - LeapMachinePerformAction(pAd, &pAd->Mlme.LeapMachine, Elem); - break; -#endif - case AIRONET_STATE_MACHINE: - StateMachinePerformAction(pAd, &pAd->Mlme.AironetMachine, Elem); - break; - -#ifdef QOS_DLS_SUPPORT - case DLS_STATE_MACHINE: - StateMachinePerformAction(pAd, &pAd->Mlme.DlsMachine, Elem); - break; -#endif // QOS_DLS_SUPPORT // -#endif // CONFIG_STA_SUPPORT // - - case ACTION_STATE_MACHINE: - StateMachinePerformAction(pAd, &pAd->Mlme.ActMachine, Elem); - break; - - - - - default: - DBGPRINT(RT_DEBUG_TRACE, ("ERROR: Illegal machine %ld in MlmeHandler()\n", Elem->Machine)); - break; - } // end of switch - - // free MLME element - Elem->Occupied = FALSE; - Elem->MsgLen = 0; - - } - else { - DBGPRINT_ERR(("MlmeHandler: MlmeQueue empty\n")); - } - } - - NdisAcquireSpinLock(&pAd->Mlme.TaskLock); - pAd->Mlme.bRunning = FALSE; - NdisReleaseSpinLock(&pAd->Mlme.TaskLock); -} - -/* - ========================================================================== - Description: - Destructor of MLME (Destroy queue, state machine, spin lock and timer) - Parameters: - Adapter - NIC Adapter pointer - Post: - The MLME task will no longer work properly - - IRQL = PASSIVE_LEVEL - - ========================================================================== - */ -VOID MlmeHalt( - IN PRTMP_ADAPTER pAd) -{ - BOOLEAN Cancelled; - - DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeHalt\n")); - - if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) - { - // disable BEACON generation and other BEACON related hardware timers - AsicDisableSync(pAd); - } - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { -#ifdef QOS_DLS_SUPPORT - UCHAR i; -#endif // QOS_DLS_SUPPORT // - // Cancel pending timers - RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled); - -#ifdef QOS_DLS_SUPPORT - for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++) - { - RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &Cancelled); - } -#endif // QOS_DLS_SUPPORT // - } -#endif // CONFIG_STA_SUPPORT // - - RTMPCancelTimer(&pAd->Mlme.PeriodicTimer, &Cancelled); - RTMPCancelTimer(&pAd->Mlme.RxAntEvalTimer, &Cancelled); - - - - if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) - { - // Set LED - RTMPSetLED(pAd, LED_HALT); - RTMPSetSignalLED(pAd, -100); // Force signal strength Led to be turned off, firmware is not done it. -#ifdef RT2870 - { - LED_CFG_STRUC LedCfg; - RTMP_IO_READ32(pAd, LED_CFG, &LedCfg.word); - LedCfg.field.LedPolar = 0; - LedCfg.field.RLedMode = 0; - LedCfg.field.GLedMode = 0; - LedCfg.field.YLedMode = 0; - RTMP_IO_WRITE32(pAd, LED_CFG, LedCfg.word); - } -#endif // RT2870 // - } - - RTMPusecDelay(5000); // 5 msec to gurantee Ant Diversity timer canceled - - MlmeQueueDestroy(&pAd->Mlme.Queue); - NdisFreeSpinLock(&pAd->Mlme.TaskLock); - - DBGPRINT(RT_DEBUG_TRACE, ("<== MlmeHalt\n")); -} - -VOID MlmeResetRalinkCounters( - IN PRTMP_ADAPTER pAd) -{ - pAd->RalinkCounters.LastOneSecRxOkDataCnt = pAd->RalinkCounters.OneSecRxOkDataCnt; - // clear all OneSecxxx counters. - pAd->RalinkCounters.OneSecBeaconSentCnt = 0; - pAd->RalinkCounters.OneSecFalseCCACnt = 0; - pAd->RalinkCounters.OneSecRxFcsErrCnt = 0; - pAd->RalinkCounters.OneSecRxOkCnt = 0; - pAd->RalinkCounters.OneSecTxFailCount = 0; - pAd->RalinkCounters.OneSecTxNoRetryOkCount = 0; - pAd->RalinkCounters.OneSecTxRetryOkCount = 0; - pAd->RalinkCounters.OneSecRxOkDataCnt = 0; - - // TODO: for debug only. to be removed - pAd->RalinkCounters.OneSecOsTxCount[QID_AC_BE] = 0; - pAd->RalinkCounters.OneSecOsTxCount[QID_AC_BK] = 0; - pAd->RalinkCounters.OneSecOsTxCount[QID_AC_VI] = 0; - pAd->RalinkCounters.OneSecOsTxCount[QID_AC_VO] = 0; - pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_BE] = 0; - pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_BK] = 0; - pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_VI] = 0; - pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_VO] = 0; - pAd->RalinkCounters.OneSecTxDoneCount = 0; - pAd->RalinkCounters.OneSecRxCount = 0; - pAd->RalinkCounters.OneSecTxAggregationCount = 0; - pAd->RalinkCounters.OneSecRxAggregationCount = 0; - - return; -} - -unsigned long rx_AMSDU; -unsigned long rx_Total; - -/* - ========================================================================== - Description: - This routine is executed periodically to - - 1. Decide if it's a right time to turn on PwrMgmt bit of all - outgoiing frames - 2. Calculate ChannelQuality based on statistics of the last - period, so that TX rate won't toggling very frequently between a - successful TX and a failed TX. - 3. If the calculated ChannelQuality indicated current connection not - healthy, then a ROAMing attempt is tried here. - - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -#define ADHOC_BEACON_LOST_TIME (8*OS_HZ) // 8 sec -VOID MlmePeriodicExec( - IN PVOID SystemSpecific1, - IN PVOID FunctionContext, - IN PVOID SystemSpecific2, - IN PVOID SystemSpecific3) -{ - ULONG TxTotalCnt; - PRTMP_ADAPTER pAd = (RTMP_ADAPTER *)FunctionContext; - - // Do nothing if the driver is starting halt state. - // This might happen when timer already been fired before cancel timer with mlmehalt - if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_HALT_IN_PROGRESS | - fRTMP_ADAPTER_RADIO_OFF | - fRTMP_ADAPTER_RADIO_MEASUREMENT | - fRTMP_ADAPTER_RESET_IN_PROGRESS)))) - return; - - RT28XX_MLME_PRE_SANITY_CHECK(pAd); - -#ifdef RALINK_ATE - /* Do not show RSSI until "Normal 1 second Mlme PeriodicExec". */ - if (ATE_ON(pAd)) - { - if (pAd->Mlme.PeriodicRound % MLME_TASK_EXEC_MULTIPLE != (MLME_TASK_EXEC_MULTIPLE - 1)) - { - pAd->Mlme.PeriodicRound ++; - return; - } - } -#endif // RALINK_ATE // - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // Do nothing if monitor mode is on - if (MONITOR_ON(pAd)) - return; - - if (pAd->Mlme.PeriodicRound & 0x1) - { - // This is the fix for wifi 11n extension channel overlapping test case. for 2860D - if (((pAd->MACVersion & 0xffff) == 0x0101) && - (STA_TGN_WIFI_ON(pAd)) && - (pAd->CommonCfg.IOTestParm.bToggle == FALSE)) - - { - RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x24Bf); - pAd->CommonCfg.IOTestParm.bToggle = TRUE; - } - else if ((STA_TGN_WIFI_ON(pAd)) && - ((pAd->MACVersion & 0xffff) == 0x0101)) - { - RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x243f); - pAd->CommonCfg.IOTestParm.bToggle = FALSE; - } - } - } -#endif // CONFIG_STA_SUPPORT // - - pAd->bUpdateBcnCntDone = FALSE; - -// RECBATimerTimeout(SystemSpecific1,FunctionContext,SystemSpecific2,SystemSpecific3); - pAd->Mlme.PeriodicRound ++; - - // execute every 500ms - if ((pAd->Mlme.PeriodicRound % 5 == 0) && RTMPAutoRateSwitchCheck(pAd)/*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))*/) - { -#ifdef CONFIG_STA_SUPPORT - // perform dynamic tx rate switching based on past TX history - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) - ) - && (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))) - MlmeDynamicTxRateSwitching(pAd); - } -#endif // CONFIG_STA_SUPPORT // - } - - // Normal 1 second Mlme PeriodicExec. - if (pAd->Mlme.PeriodicRound %MLME_TASK_EXEC_MULTIPLE == 0) - { - pAd->Mlme.OneSecPeriodicRound ++; - -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - /* request from Baron : move this routine from later to here */ - /* for showing Rx error count in ATE RXFRAME */ - NICUpdateRawCounters(pAd); - if (pAd->ate.bRxFer == 1) - { - pAd->ate.RxTotalCnt += pAd->ate.RxCntPerSec; - ate_print(KERN_EMERG "MlmePeriodicExec: Rx packet cnt = %d/%d\n", pAd->ate.RxCntPerSec, pAd->ate.RxTotalCnt); - pAd->ate.RxCntPerSec = 0; - - if (pAd->ate.RxAntennaSel == 0) - ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi0=%d, AvgRssi1=%d, AvgRssi2=%d\n\n", - pAd->ate.AvgRssi0, pAd->ate.AvgRssi1, pAd->ate.AvgRssi2); - else - ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi=%d\n\n", pAd->ate.AvgRssi0); - } - MlmeResetRalinkCounters(pAd); - return; - } -#endif // RALINK_ATE // - - - if (rx_Total) - { - - // reset counters - rx_AMSDU = 0; - rx_Total = 0; - } - - //ORIBATimerTimeout(pAd); - - // Media status changed, report to NDIS - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE)) - { - RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE); - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) - { - pAd->IndicateMediaState = NdisMediaStateConnected; - RTMP_IndicateMediaState(pAd); - - } - else - { - pAd->IndicateMediaState = NdisMediaStateDisconnected; - RTMP_IndicateMediaState(pAd); - } - } - - NdisGetSystemUpTime(&pAd->Mlme.Now32); - - // add the most up-to-date h/w raw counters into software variable, so that - // the dynamic tuning mechanism below are based on most up-to-date information - NICUpdateRawCounters(pAd); - -#ifdef RT2870 - RT2870_WatchDog(pAd); -#endif // RT2870 // - -#ifdef DOT11_N_SUPPORT - // Need statistics after read counter. So put after NICUpdateRawCounters - ORIBATimerTimeout(pAd); -#endif // DOT11_N_SUPPORT // - - // if MGMT RING is full more than twice within 1 second, we consider there's - // a hardware problem stucking the TX path. In this case, try a hardware reset - // to recover the system - // if (pAd->RalinkCounters.MgmtRingFullCount >= 2) - // RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HARDWARE_ERROR); - // else - // pAd->RalinkCounters.MgmtRingFullCount = 0; - - // The time period for checking antenna is according to traffic - if (pAd->Mlme.bEnableAutoAntennaCheck) - { - TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount + - pAd->RalinkCounters.OneSecTxRetryOkCount + - pAd->RalinkCounters.OneSecTxFailCount; - - if (TxTotalCnt > 50) - { - if (pAd->Mlme.OneSecPeriodicRound % 10 == 0) - { - AsicEvaluateRxAnt(pAd); - } - } - else - { - if (pAd->Mlme.OneSecPeriodicRound % 3 == 0) - { - AsicEvaluateRxAnt(pAd); - } - } - } - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - STAMlmePeriodicExec(pAd); -#endif // CONFIG_STA_SUPPORT // - - MlmeResetRalinkCounters(pAd); - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - { - // When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock - // and sending CTS-to-self over and over. - // Software Patch Solution: - // 1. Polling debug state register 0x10F4 every one second. - // 2. If in 0x10F4 the ((bit29==1) && (bit7==1)) OR ((bit29==1) && (bit5==1)), it means the deadlock has occurred. - // 3. If the deadlock occurred, reset MAC/BBP by setting 0x1004 to 0x0001 for a while then setting it back to 0x000C again. - - UINT32 MacReg = 0; - - RTMP_IO_READ32(pAd, 0x10F4, &MacReg); - if (((MacReg & 0x20000000) && (MacReg & 0x80)) || ((MacReg & 0x20000000) && (MacReg & 0x20))) - { - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1); - RTMPusecDelay(1); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0xC); - - DBGPRINT(RT_DEBUG_WARN,("Warning, MAC specific condition occurs \n")); - } - } - } -#endif // CONFIG_STA_SUPPORT // - - RT28XX_MLME_HANDLER(pAd); - } - - - pAd->bUpdateBcnCntDone = FALSE; -} - -#ifdef CONFIG_STA_SUPPORT -VOID STAMlmePeriodicExec( - PRTMP_ADAPTER pAd) -{ - ULONG TxTotalCnt; - int i; - -// -// We return here in ATE mode, because the statistics -// that ATE needs are not collected via this routine. -// -#ifdef RALINK_ATE - // It is supposed that we will never reach here in ATE mode. - ASSERT(!(ATE_ON(pAd))); - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - -#ifdef WPA_SUPPLICANT_SUPPORT - if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE) -#endif // WPA_SUPPLICANT_SUPPORT // - { - // WPA MIC error should block association attempt for 60 seconds - if (pAd->StaCfg.bBlockAssoc && (pAd->StaCfg.LastMicErrorTime + (60 * OS_HZ) < pAd->Mlme.Now32)) - pAd->StaCfg.bBlockAssoc = FALSE; - } - - if ((pAd->PreMediaState != pAd->IndicateMediaState) && (pAd->CommonCfg.bWirelessEvent)) - { - if (pAd->IndicateMediaState == NdisMediaStateConnected) - { - RTMPSendWirelessEvent(pAd, IW_STA_LINKUP_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0); - } - pAd->PreMediaState = pAd->IndicateMediaState; - } - - - - - AsicStaBbpTuning(pAd); - - TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount + - pAd->RalinkCounters.OneSecTxRetryOkCount + - pAd->RalinkCounters.OneSecTxFailCount; - - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) - { - // update channel quality for Roaming and UI LinkQuality display - MlmeCalculateChannelQuality(pAd, pAd->Mlme.Now32); - } - - // must be AFTER MlmeDynamicTxRateSwitching() because it needs to know if - // Radio is currently in noisy environment - if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) - AsicAdjustTxPower(pAd); - - if (INFRA_ON(pAd)) - { -#ifdef QOS_DLS_SUPPORT - // Check DLS time out, then tear down those session - RTMPCheckDLSTimeOut(pAd); -#endif // QOS_DLS_SUPPORT // - - // Is PSM bit consistent with user power management policy? - // This is the only place that will set PSM bit ON. - if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) - MlmeCheckPsmChange(pAd, pAd->Mlme.Now32); - - pAd->RalinkCounters.LastOneSecTotalTxCount = TxTotalCnt; - - if ((pAd->StaCfg.LastBeaconRxTime + 1*OS_HZ < pAd->Mlme.Now32) && - (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) && - ((TxTotalCnt + pAd->RalinkCounters.OneSecRxOkCnt < 600))) - { - RTMPSetAGCInitValue(pAd, BW_20); - DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - No BEACON. restore R66 to the low bound(%d) \n", (0x2E + GET_LNA_GAIN(pAd)))); - } - - //if ((pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) && - // (pAd->RalinkCounters.OneSecTxRetryOkCount == 0)) - { - if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable) - { - // When APSD is enabled, the period changes as 20 sec - if ((pAd->Mlme.OneSecPeriodicRound % 20) == 8) - RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE); - } - else - { - // Send out a NULL frame every 10 sec to inform AP that STA is still alive (Avoid being age out) - if ((pAd->Mlme.OneSecPeriodicRound % 10) == 8) - { - if (pAd->CommonCfg.bWmmCapable) - RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE); - else - RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, FALSE); - } - } - } - - if (CQI_IS_DEAD(pAd->Mlme.ChannelQuality)) - { - DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - No BEACON. Dead CQI. Auto Recovery attempt #%ld\n", pAd->RalinkCounters.BadCQIAutoRecoveryCount)); - pAd->StaCfg.CCXAdjacentAPReportFlag = TRUE; - pAd->StaCfg.CCXAdjacentAPLinkDownTime = pAd->StaCfg.LastBeaconRxTime; - - // Lost AP, send disconnect & link down event - LinkDown(pAd, FALSE); - -#ifdef WPA_SUPPLICANT_SUPPORT -#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT - if (pAd->StaCfg.WpaSupplicantUP) - { - union iwreq_data wrqu; - //send disassociate event to wpa_supplicant - memset(&wrqu, 0, sizeof(wrqu)); - wrqu.data.flags = RT_DISASSOC_EVENT_FLAG; - wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL); - } -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // -#endif // WPA_SUPPLICANT_SUPPORT // - -#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT - { - union iwreq_data wrqu; - memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN); - wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL); - } -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // - - // RTMPPatchMacBbpBug(pAd); - MlmeAutoReconnectLastSSID(pAd); - } - else if (CQI_IS_BAD(pAd->Mlme.ChannelQuality)) - { - pAd->RalinkCounters.BadCQIAutoRecoveryCount ++; - DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Bad CQI. Auto Recovery attempt #%ld\n", pAd->RalinkCounters.BadCQIAutoRecoveryCount)); - MlmeAutoReconnectLastSSID(pAd); - } - - // Add auto seamless roaming - if (pAd->StaCfg.bFastRoaming) - { - SHORT dBmToRoam = (SHORT)pAd->StaCfg.dBmToRoam; - - DBGPRINT(RT_DEBUG_TRACE, ("Rssi=%d, dBmToRoam=%d\n", RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2), (CHAR)dBmToRoam)); - - if (RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2) <= (CHAR)dBmToRoam) - { - MlmeCheckForFastRoaming(pAd, pAd->Mlme.Now32); - } - } - } - else if (ADHOC_ON(pAd)) - { - //radar detect - if ((pAd->CommonCfg.Channel > 14) - && (pAd->CommonCfg.bIEEE80211H == 1) - && RadarChannelCheck(pAd, pAd->CommonCfg.Channel)) - { - RadarDetectPeriodic(pAd); - } - - // If all peers leave, and this STA becomes the last one in this IBSS, then change MediaState - // to DISCONNECTED. But still holding this IBSS (i.e. sending BEACON) so that other STAs can - // join later. - if ((pAd->StaCfg.LastBeaconRxTime + ADHOC_BEACON_LOST_TIME < pAd->Mlme.Now32) && - OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) - { - MLME_START_REQ_STRUCT StartReq; - - DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - excessive BEACON lost, last STA in this IBSS, MediaState=Disconnected\n")); - LinkDown(pAd, FALSE); - - StartParmFill(pAd, &StartReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen); - MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ, sizeof(MLME_START_REQ_STRUCT), &StartReq); - pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START; - } - - for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++) - { - MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[i]; - - if (pEntry->ValidAsCLI == FALSE) - continue; - - if (pEntry->LastBeaconRxTime + ADHOC_BEACON_LOST_TIME < pAd->Mlme.Now32) - MacTableDeleteEntry(pAd, pEntry->Aid, pEntry->Addr); - } - } - else // no INFRA nor ADHOC connection - { - - if (pAd->StaCfg.bScanReqIsFromWebUI && - ((pAd->StaCfg.LastScanTime + 30 * OS_HZ) > pAd->Mlme.Now32)) - goto SKIP_AUTO_SCAN_CONN; - else - pAd->StaCfg.bScanReqIsFromWebUI = FALSE; - - if ((pAd->StaCfg.bAutoReconnect == TRUE) - && RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP) - && (MlmeValidateSSID(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen) == TRUE)) - { - if ((pAd->ScanTab.BssNr==0) && (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)) - { - MLME_SCAN_REQ_STRUCT ScanReq; - - if ((pAd->StaCfg.LastScanTime + 10 * OS_HZ) < pAd->Mlme.Now32) - { - DBGPRINT(RT_DEBUG_TRACE, ("STAMlmePeriodicExec():CNTL - ScanTab.BssNr==0, start a new ACTIVE scan SSID[%s]\n", pAd->MlmeAux.AutoReconnectSsid)); - ScanParmFill(pAd, &ScanReq, pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen, BSS_ANY, SCAN_ACTIVE); - MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq); - pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN; - // Reset Missed scan number - pAd->StaCfg.LastScanTime = pAd->Mlme.Now32; - } - else if (pAd->StaCfg.BssType == BSS_ADHOC) // Quit the forever scan when in a very clean room - MlmeAutoReconnectLastSSID(pAd); - } - else if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) - { - if ((pAd->Mlme.OneSecPeriodicRound % 7) == 0) - { - MlmeAutoScan(pAd); - pAd->StaCfg.LastScanTime = pAd->Mlme.Now32; - } - else - { -#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier - if (pAd->CommonCfg.CarrierDetect.Enable == TRUE) - { - if ((pAd->Mlme.OneSecPeriodicRound % 5) == 1) - MlmeAutoReconnectLastSSID(pAd); - } - else -#endif // CARRIER_DETECTION_SUPPORT // - MlmeAutoReconnectLastSSID(pAd); - } - } - } - } - -SKIP_AUTO_SCAN_CONN: - -#ifdef DOT11_N_SUPPORT - if ((pAd->MacTab.Content[BSSID_WCID].TXBAbitmap !=0) && (pAd->MacTab.fAnyBASession == FALSE)) - { - pAd->MacTab.fAnyBASession = TRUE; - AsicUpdateProtect(pAd, HT_FORCERTSCTS, ALLN_SETPROTECT, FALSE, FALSE); - } - else if ((pAd->MacTab.Content[BSSID_WCID].TXBAbitmap ==0) && (pAd->MacTab.fAnyBASession == TRUE)) - { - pAd->MacTab.fAnyBASession = FALSE; - AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, FALSE, FALSE); - } -#endif // DOT11_N_SUPPORT // - - -#ifdef DOT11_N_SUPPORT -#ifdef DOT11N_DRAFT3 - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SCAN_2040)) - TriEventCounterMaintenance(pAd); -#endif // DOT11N_DRAFT3 // -#endif // DOT11_N_SUPPORT // - - return; -} - -// Link down report -VOID LinkDownExec( - IN PVOID SystemSpecific1, - IN PVOID FunctionContext, - IN PVOID SystemSpecific2, - IN PVOID SystemSpecific3) -{ - - RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext; - - pAd->IndicateMediaState = NdisMediaStateDisconnected; - RTMP_IndicateMediaState(pAd); - pAd->ExtraInfo = GENERAL_LINK_DOWN; -} - -// IRQL = DISPATCH_LEVEL -VOID MlmeAutoScan( - IN PRTMP_ADAPTER pAd) -{ - // check CntlMachine.CurrState to avoid collision with NDIS SetOID request - if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) - { - DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Driver auto scan\n")); - MlmeEnqueue(pAd, - MLME_CNTL_STATE_MACHINE, - OID_802_11_BSSID_LIST_SCAN, - 0, - NULL); - RT28XX_MLME_HANDLER(pAd); - } -} - -// IRQL = DISPATCH_LEVEL -VOID MlmeAutoReconnectLastSSID( - IN PRTMP_ADAPTER pAd) -{ - - - // check CntlMachine.CurrState to avoid collision with NDIS SetOID request - if ((pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) && - (MlmeValidateSSID(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen) == TRUE)) - { - NDIS_802_11_SSID OidSsid; - OidSsid.SsidLength = pAd->MlmeAux.AutoReconnectSsidLen; - NdisMoveMemory(OidSsid.Ssid, pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen); - - DBGPRINT(RT_DEBUG_TRACE, ("Driver auto reconnect to last OID_802_11_SSID setting - %s, len - %d\n", pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen)); - MlmeEnqueue(pAd, - MLME_CNTL_STATE_MACHINE, - OID_802_11_SSID, - sizeof(NDIS_802_11_SSID), - &OidSsid); - RT28XX_MLME_HANDLER(pAd); - } -} -#endif // CONFIG_STA_SUPPORT // - -/* - ========================================================================== - Validate SSID for connection try and rescan purpose - Valid SSID will have visible chars only. - The valid length is from 0 to 32. - IRQL = DISPATCH_LEVEL - ========================================================================== - */ -BOOLEAN MlmeValidateSSID( - IN PUCHAR pSsid, - IN UCHAR SsidLen) -{ - int index; - - if (SsidLen > MAX_LEN_OF_SSID) - return (FALSE); - - // Check each character value - for (index = 0; index < SsidLen; index++) - { - if (pSsid[index] < 0x20) - return (FALSE); - } - - // All checked - return (TRUE); -} - -VOID MlmeSelectTxRateTable( - IN PRTMP_ADAPTER pAd, - IN PMAC_TABLE_ENTRY pEntry, - IN PUCHAR *ppTable, - IN PUCHAR pTableSize, - IN PUCHAR pInitTxRateIdx) -{ - do - { - // decide the rate table for tuning - if (pAd->CommonCfg.TxRateTableSize > 0) - { - *ppTable = RateSwitchTable; - *pTableSize = RateSwitchTable[0]; - *pInitTxRateIdx = RateSwitchTable[1]; - - break; - } - -#ifdef CONFIG_STA_SUPPORT - if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd)) - { -#ifdef DOT11_N_SUPPORT - if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && - (pEntry->HTCapability.MCSSet[0] == 0xff) && - ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1))) - {// 11N 1S Adhoc - *ppTable = RateSwitchTable11N1S; - *pTableSize = RateSwitchTable11N1S[0]; - *pInitTxRateIdx = RateSwitchTable11N1S[1]; - - } - else if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && - (pEntry->HTCapability.MCSSet[0] == 0xff) && - (pEntry->HTCapability.MCSSet[1] == 0xff) && - (pAd->Antenna.field.TxPath == 2)) - {// 11N 2S Adhoc - if (pAd->LatchRfRegs.Channel <= 14) - { - *ppTable = RateSwitchTable11N2S; - *pTableSize = RateSwitchTable11N2S[0]; - *pInitTxRateIdx = RateSwitchTable11N2S[1]; - } - else - { - *ppTable = RateSwitchTable11N2SForABand; - *pTableSize = RateSwitchTable11N2SForABand[0]; - *pInitTxRateIdx = RateSwitchTable11N2SForABand[1]; - } - - } - else -#endif // DOT11_N_SUPPORT // - if ((pEntry->RateLen == 4) -#ifdef DOT11_N_SUPPORT - && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0) -#endif // DOT11_N_SUPPORT // - ) - { - *ppTable = RateSwitchTable11B; - *pTableSize = RateSwitchTable11B[0]; - *pInitTxRateIdx = RateSwitchTable11B[1]; - - } - else if (pAd->LatchRfRegs.Channel <= 14) - { - *ppTable = RateSwitchTable11BG; - *pTableSize = RateSwitchTable11BG[0]; - *pInitTxRateIdx = RateSwitchTable11BG[1]; - - } - else - { - *ppTable = RateSwitchTable11G; - *pTableSize = RateSwitchTable11G[0]; - *pInitTxRateIdx = RateSwitchTable11G[1]; - - } - break; - } -#endif // CONFIG_STA_SUPPORT // - -#ifdef DOT11_N_SUPPORT - //if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && - // ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1))) - if ((pEntry->RateLen == 12) && (pEntry->HTCapability.MCSSet[0] == 0xff) && - ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1))) - {// 11BGN 1S AP - *ppTable = RateSwitchTable11BGN1S; - *pTableSize = RateSwitchTable11BGN1S[0]; - *pInitTxRateIdx = RateSwitchTable11BGN1S[1]; - - break; - } - - //else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && - // (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2)) - if ((pEntry->RateLen == 12) && (pEntry->HTCapability.MCSSet[0] == 0xff) && - (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2)) - {// 11BGN 2S AP - if (pAd->LatchRfRegs.Channel <= 14) - { - *ppTable = RateSwitchTable11BGN2S; - *pTableSize = RateSwitchTable11BGN2S[0]; - *pInitTxRateIdx = RateSwitchTable11BGN2S[1]; - - } - else - { - *ppTable = RateSwitchTable11BGN2SForABand; - *pTableSize = RateSwitchTable11BGN2SForABand[0]; - *pInitTxRateIdx = RateSwitchTable11BGN2SForABand[1]; - - } - break; - } - - //else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1))) - if ((pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1))) - {// 11N 1S AP - *ppTable = RateSwitchTable11N1S; - *pTableSize = RateSwitchTable11N1S[0]; - *pInitTxRateIdx = RateSwitchTable11N1S[1]; - - break; - } - - //else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2)) - if ((pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2)) - {// 11N 2S AP - if (pAd->LatchRfRegs.Channel <= 14) - { - *ppTable = RateSwitchTable11N2S; - *pTableSize = RateSwitchTable11N2S[0]; - *pInitTxRateIdx = RateSwitchTable11N2S[1]; - } - else - { - *ppTable = RateSwitchTable11N2SForABand; - *pTableSize = RateSwitchTable11N2SForABand[0]; - *pInitTxRateIdx = RateSwitchTable11N2SForABand[1]; - } - - break; - } -#endif // DOT11_N_SUPPORT // - //else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) - if ((pEntry->RateLen == 4) -#ifdef DOT11_N_SUPPORT - && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0) -#endif // DOT11_N_SUPPORT // - ) - {// B only AP - *ppTable = RateSwitchTable11B; - *pTableSize = RateSwitchTable11B[0]; - *pInitTxRateIdx = RateSwitchTable11B[1]; - - break; - } - - //else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen > 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) - if ((pEntry->RateLen > 8) -#ifdef DOT11_N_SUPPORT - && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0) -#endif // DOT11_N_SUPPORT // - ) - {// B/G mixed AP - *ppTable = RateSwitchTable11BG; - *pTableSize = RateSwitchTable11BG[0]; - *pInitTxRateIdx = RateSwitchTable11BG[1]; - - break; - } - - //else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) - if ((pEntry->RateLen == 8) -#ifdef DOT11_N_SUPPORT - && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0) -#endif // DOT11_N_SUPPORT // - ) - {// G only AP - *ppTable = RateSwitchTable11G; - *pTableSize = RateSwitchTable11G[0]; - *pInitTxRateIdx = RateSwitchTable11G[1]; - - break; - } -#ifdef DOT11_N_SUPPORT -#endif // DOT11_N_SUPPORT // - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { -#ifdef DOT11_N_SUPPORT - //else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) - if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)) -#endif // DOT11_N_SUPPORT // - { // Legacy mode - if (pAd->CommonCfg.MaxTxRate <= RATE_11) - { - *ppTable = RateSwitchTable11B; - *pTableSize = RateSwitchTable11B[0]; - *pInitTxRateIdx = RateSwitchTable11B[1]; - } - else if ((pAd->CommonCfg.MaxTxRate > RATE_11) && (pAd->CommonCfg.MinTxRate > RATE_11)) - { - *ppTable = RateSwitchTable11G; - *pTableSize = RateSwitchTable11G[0]; - *pInitTxRateIdx = RateSwitchTable11G[1]; - - } - else - { - *ppTable = RateSwitchTable11BG; - *pTableSize = RateSwitchTable11BG[0]; - *pInitTxRateIdx = RateSwitchTable11BG[1]; - } - break; - } -#ifdef DOT11_N_SUPPORT - if (pAd->LatchRfRegs.Channel <= 14) - { - if (pAd->CommonCfg.TxStream == 1) - { - *ppTable = RateSwitchTable11N1S; - *pTableSize = RateSwitchTable11N1S[0]; - *pInitTxRateIdx = RateSwitchTable11N1S[1]; - DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 1S AP \n")); - } - else - { - *ppTable = RateSwitchTable11N2S; - *pTableSize = RateSwitchTable11N2S[0]; - *pInitTxRateIdx = RateSwitchTable11N2S[1]; - DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 2S AP \n")); - } - } - else - { - if (pAd->CommonCfg.TxStream == 1) - { - *ppTable = RateSwitchTable11N1S; - *pTableSize = RateSwitchTable11N1S[0]; - *pInitTxRateIdx = RateSwitchTable11N1S[1]; - DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 1S AP \n")); - } - else - { - *ppTable = RateSwitchTable11N2SForABand; - *pTableSize = RateSwitchTable11N2SForABand[0]; - *pInitTxRateIdx = RateSwitchTable11N2SForABand[1]; - DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 2S AP \n")); - } - } -#endif // DOT11_N_SUPPORT // - DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n", - pAd->StaActive.SupRateLen, pAd->StaActive.ExtRateLen, pAd->StaActive.SupportedPhyInfo.MCSSet[0], pAd->StaActive.SupportedPhyInfo.MCSSet[1])); - } -#endif // CONFIG_STA_SUPPORT // - } while(FALSE); -} - -#ifdef CONFIG_STA_SUPPORT -/* - ========================================================================== - Description: - This routine checks if there're other APs out there capable for - roaming. Caller should call this routine only when Link up in INFRA mode - and channel quality is below CQI_GOOD_THRESHOLD. - - IRQL = DISPATCH_LEVEL - - Output: - ========================================================================== - */ -VOID MlmeCheckForRoaming( - IN PRTMP_ADAPTER pAd, - IN ULONG Now32) -{ - USHORT i; - BSS_TABLE *pRoamTab = &pAd->MlmeAux.RoamTab; - BSS_ENTRY *pBss; - - DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeCheckForRoaming\n")); - // put all roaming candidates into RoamTab, and sort in RSSI order - BssTableInit(pRoamTab); - for (i = 0; i < pAd->ScanTab.BssNr; i++) - { - pBss = &pAd->ScanTab.BssEntry[i]; - - if ((pBss->LastBeaconRxTime + BEACON_LOST_TIME) < Now32) - continue; // AP disappear - if (pBss->Rssi <= RSSI_THRESHOLD_FOR_ROAMING) - continue; // RSSI too weak. forget it. - if (MAC_ADDR_EQUAL(pBss->Bssid, pAd->CommonCfg.Bssid)) - continue; // skip current AP - if (pBss->Rssi < (pAd->StaCfg.RssiSample.LastRssi0 + RSSI_DELTA)) - continue; // only AP with stronger RSSI is eligible for roaming - - // AP passing all above rules is put into roaming candidate table - NdisMoveMemory(&pRoamTab->BssEntry[pRoamTab->BssNr], pBss, sizeof(BSS_ENTRY)); - pRoamTab->BssNr += 1; - } - - if (pRoamTab->BssNr > 0) - { - // check CntlMachine.CurrState to avoid collision with NDIS SetOID request - if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) - { - pAd->RalinkCounters.PoorCQIRoamingCount ++; - DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Roaming attempt #%ld\n", pAd->RalinkCounters.PoorCQIRoamingCount)); - MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_MLME_ROAMING_REQ, 0, NULL); - RT28XX_MLME_HANDLER(pAd); - } - } - DBGPRINT(RT_DEBUG_TRACE, ("<== MlmeCheckForRoaming(# of candidate= %d)\n",pRoamTab->BssNr)); -} - -/* - ========================================================================== - Description: - This routine checks if there're other APs out there capable for - roaming. Caller should call this routine only when link up in INFRA mode - and channel quality is below CQI_GOOD_THRESHOLD. - - IRQL = DISPATCH_LEVEL - - Output: - ========================================================================== - */ -VOID MlmeCheckForFastRoaming( - IN PRTMP_ADAPTER pAd, - IN ULONG Now) -{ - USHORT i; - BSS_TABLE *pRoamTab = &pAd->MlmeAux.RoamTab; - BSS_ENTRY *pBss; - - DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeCheckForFastRoaming\n")); - // put all roaming candidates into RoamTab, and sort in RSSI order - BssTableInit(pRoamTab); - for (i = 0; i < pAd->ScanTab.BssNr; i++) - { - pBss = &pAd->ScanTab.BssEntry[i]; - - if ((pBss->Rssi <= -50) && (pBss->Channel == pAd->CommonCfg.Channel)) - continue; // RSSI too weak. forget it. - if (MAC_ADDR_EQUAL(pBss->Bssid, pAd->CommonCfg.Bssid)) - continue; // skip current AP - if (!SSID_EQUAL(pBss->Ssid, pBss->SsidLen, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen)) - continue; // skip different SSID - if (pBss->Rssi < (RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2) + RSSI_DELTA)) - continue; // skip AP without better RSSI - - DBGPRINT(RT_DEBUG_TRACE, ("LastRssi0 = %d, pBss->Rssi = %d\n", RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2), pBss->Rssi)); - // AP passing all above rules is put into roaming candidate table - NdisMoveMemory(&pRoamTab->BssEntry[pRoamTab->BssNr], pBss, sizeof(BSS_ENTRY)); - pRoamTab->BssNr += 1; - } - - if (pRoamTab->BssNr > 0) - { - // check CntlMachine.CurrState to avoid collision with NDIS SetOID request - if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) - { - pAd->RalinkCounters.PoorCQIRoamingCount ++; - DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Roaming attempt #%ld\n", pAd->RalinkCounters.PoorCQIRoamingCount)); - MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_MLME_ROAMING_REQ, 0, NULL); - RT28XX_MLME_HANDLER(pAd); - } - } - // Maybe site survey required - else - { - if ((pAd->StaCfg.LastScanTime + 10 * 1000) < Now) - { - // check CntlMachine.CurrState to avoid collision with NDIS SetOID request - DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Roaming, No eligable entry, try new scan!\n")); - pAd->StaCfg.ScanCnt = 2; - pAd->StaCfg.LastScanTime = Now; - MlmeAutoScan(pAd); - } - } - - DBGPRINT(RT_DEBUG_TRACE, ("<== MlmeCheckForFastRoaming (BssNr=%d)\n", pRoamTab->BssNr)); -} - -/* - ========================================================================== - Description: - This routine calculates TxPER, RxPER of the past N-sec period. And - according to the calculation result, ChannelQuality is calculated here - to decide if current AP is still doing the job. - - If ChannelQuality is not good, a ROAMing attempt may be tried later. - Output: - StaCfg.ChannelQuality - 0..100 - - IRQL = DISPATCH_LEVEL - - NOTE: This routine decide channle quality based on RX CRC error ratio. - Caller should make sure a function call to NICUpdateRawCounters(pAd) - is performed right before this routine, so that this routine can decide - channel quality based on the most up-to-date information - ========================================================================== - */ -VOID MlmeCalculateChannelQuality( - IN PRTMP_ADAPTER pAd, - IN ULONG Now32) -{ - ULONG TxOkCnt, TxCnt, TxPER, TxPRR; - ULONG RxCnt, RxPER; - UCHAR NorRssi; - CHAR MaxRssi; - ULONG BeaconLostTime = BEACON_LOST_TIME; - -#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier - // longer beacon lost time when carrier detection enabled - if (pAd->CommonCfg.CarrierDetect.Enable == TRUE) - { - BeaconLostTime = BEACON_LOST_TIME + BEACON_LOST_TIME/2; - } -#endif // CARRIER_DETECTION_SUPPORT // - - MaxRssi = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2); - - // - // calculate TX packet error ratio and TX retry ratio - if too few TX samples, skip TX related statistics - // - TxOkCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount + pAd->RalinkCounters.OneSecTxRetryOkCount; - TxCnt = TxOkCnt + pAd->RalinkCounters.OneSecTxFailCount; - if (TxCnt < 5) - { - TxPER = 0; - TxPRR = 0; - } - else - { - TxPER = (pAd->RalinkCounters.OneSecTxFailCount * 100) / TxCnt; - TxPRR = ((TxCnt - pAd->RalinkCounters.OneSecTxNoRetryOkCount) * 100) / TxCnt; - } - - // - // calculate RX PER - don't take RxPER into consideration if too few sample - // - RxCnt = pAd->RalinkCounters.OneSecRxOkCnt + pAd->RalinkCounters.OneSecRxFcsErrCnt; - if (RxCnt < 5) - RxPER = 0; - else - RxPER = (pAd->RalinkCounters.OneSecRxFcsErrCnt * 100) / RxCnt; - - // - // decide ChannelQuality based on: 1)last BEACON received time, 2)last RSSI, 3)TxPER, and 4)RxPER - // - if (INFRA_ON(pAd) && - (pAd->RalinkCounters.OneSecTxNoRetryOkCount < 2) && // no heavy traffic - (pAd->StaCfg.LastBeaconRxTime + BeaconLostTime < Now32)) - { - DBGPRINT(RT_DEBUG_TRACE, ("BEACON lost > %ld msec with TxOkCnt=%ld -> CQI=0\n", BeaconLostTime, TxOkCnt)); - pAd->Mlme.ChannelQuality = 0; - } - else - { - // Normalize Rssi - if (MaxRssi > -40) - NorRssi = 100; - else if (MaxRssi < -90) - NorRssi = 0; - else - NorRssi = (MaxRssi + 90) * 2; - - // ChannelQuality = W1*RSSI + W2*TxPRR + W3*RxPER (RSSI 0..100), (TxPER 100..0), (RxPER 100..0) - pAd->Mlme.ChannelQuality = (RSSI_WEIGHTING * NorRssi + - TX_WEIGHTING * (100 - TxPRR) + - RX_WEIGHTING* (100 - RxPER)) / 100; - if (pAd->Mlme.ChannelQuality >= 100) - pAd->Mlme.ChannelQuality = 100; - } - -} - -VOID MlmeSetTxRate( - IN PRTMP_ADAPTER pAd, - IN PMAC_TABLE_ENTRY pEntry, - IN PRTMP_TX_RATE_SWITCH pTxRate) -{ - UCHAR MaxMode = MODE_OFDM; - -#ifdef DOT11_N_SUPPORT - MaxMode = MODE_HTGREENFIELD; - - if (pTxRate->STBC && (pAd->StaCfg.MaxHTPhyMode.field.STBC) && (pAd->Antenna.field.TxPath == 2)) - pAd->StaCfg.HTPhyMode.field.STBC = STBC_USE; - else -#endif // DOT11_N_SUPPORT // - pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE; - - if (pTxRate->CurrMCS < MCS_AUTO) - pAd->StaCfg.HTPhyMode.field.MCS = pTxRate->CurrMCS; - - if (pAd->StaCfg.HTPhyMode.field.MCS > 7) - pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE; - - if (ADHOC_ON(pAd)) - { - // If peer adhoc is b-only mode, we can't send 11g rate. - pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800; - pEntry->HTPhyMode.field.STBC = STBC_NONE; - - // - // For Adhoc MODE_CCK, driver will use AdhocBOnlyJoined flag to roll back to B only if necessary - // - pEntry->HTPhyMode.field.MODE = pTxRate->Mode; - pEntry->HTPhyMode.field.ShortGI = pAd->StaCfg.HTPhyMode.field.ShortGI; - pEntry->HTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS; - - // Patch speed error in status page - pAd->StaCfg.HTPhyMode.field.MODE = pEntry->HTPhyMode.field.MODE; - } - else - { - if (pTxRate->Mode <= MaxMode) - pAd->StaCfg.HTPhyMode.field.MODE = pTxRate->Mode; - -#ifdef DOT11_N_SUPPORT - if (pTxRate->ShortGI && (pAd->StaCfg.MaxHTPhyMode.field.ShortGI)) - pAd->StaCfg.HTPhyMode.field.ShortGI = GI_400; - else -#endif // DOT11_N_SUPPORT // - pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800; - -#ifdef DOT11_N_SUPPORT - // Reexam each bandwidth's SGI support. - if (pAd->StaCfg.HTPhyMode.field.ShortGI == GI_400) - { - if ((pEntry->HTPhyMode.field.BW == BW_20) && (!CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE))) - pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800; - if ((pEntry->HTPhyMode.field.BW == BW_40) && (!CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE))) - pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800; - } - - // Turn RTS/CTS rate to 6Mbps. - if ((pEntry->HTPhyMode.field.MCS == 0) && (pAd->StaCfg.HTPhyMode.field.MCS != 0)) - { - pEntry->HTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS; - if (pAd->MacTab.fAnyBASession) - { - AsicUpdateProtect(pAd, HT_FORCERTSCTS, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent); - } - else - { - AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent); - } - } - else if ((pEntry->HTPhyMode.field.MCS == 8) && (pAd->StaCfg.HTPhyMode.field.MCS != 8)) - { - pEntry->HTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS; - if (pAd->MacTab.fAnyBASession) - { - AsicUpdateProtect(pAd, HT_FORCERTSCTS, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent); - } - else - { - AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent); - } - } - else if ((pEntry->HTPhyMode.field.MCS != 0) && (pAd->StaCfg.HTPhyMode.field.MCS == 0)) - { - AsicUpdateProtect(pAd, HT_RTSCTS_6M, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent); - - } - else if ((pEntry->HTPhyMode.field.MCS != 8) && (pAd->StaCfg.HTPhyMode.field.MCS == 8)) - { - AsicUpdateProtect(pAd, HT_RTSCTS_6M, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent); - } -#endif // DOT11_N_SUPPORT // - - pEntry->HTPhyMode.field.STBC = pAd->StaCfg.HTPhyMode.field.STBC; - pEntry->HTPhyMode.field.ShortGI = pAd->StaCfg.HTPhyMode.field.ShortGI; - pEntry->HTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS; - pEntry->HTPhyMode.field.MODE = pAd->StaCfg.HTPhyMode.field.MODE; -#ifdef DOT11_N_SUPPORT - if ((pAd->StaCfg.MaxHTPhyMode.field.MODE == MODE_HTGREENFIELD) && - pAd->WIFItestbed.bGreenField) - pEntry->HTPhyMode.field.MODE = MODE_HTGREENFIELD; -#endif // DOT11_N_SUPPORT // - } - - pAd->LastTxRate = (USHORT)(pEntry->HTPhyMode.word); -} - -/* - ========================================================================== - Description: - This routine calculates the acumulated TxPER of eaxh TxRate. And - according to the calculation result, change CommonCfg.TxRate which - is the stable TX Rate we expect the Radio situation could sustained. - - CommonCfg.TxRate will change dynamically within {RATE_1/RATE_6, MaxTxRate} - Output: - CommonCfg.TxRate - - - IRQL = DISPATCH_LEVEL - - NOTE: - call this routine every second - ========================================================================== - */ -VOID MlmeDynamicTxRateSwitching( - IN PRTMP_ADAPTER pAd) -{ - UCHAR UpRateIdx = 0, DownRateIdx = 0, CurrRateIdx; - ULONG i, AccuTxTotalCnt = 0, TxTotalCnt; - ULONG TxErrorRatio = 0; - BOOLEAN bTxRateChanged, bUpgradeQuality = FALSE; - PRTMP_TX_RATE_SWITCH pCurrTxRate, pNextTxRate = NULL; - PUCHAR pTable; - UCHAR TableSize = 0; - UCHAR InitTxRateIdx = 0, TrainUp, TrainDown; - CHAR Rssi, RssiOffset = 0; - TX_STA_CNT1_STRUC StaTx1; - TX_STA_CNT0_STRUC TxStaCnt0; - ULONG TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0; - MAC_TABLE_ENTRY *pEntry; - -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - return; - } -#endif // RALINK_ATE // - - // - // walk through MAC table, see if need to change AP's TX rate toward each entry - // - for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++) - { - pEntry = &pAd->MacTab.Content[i]; - - // check if this entry need to switch rate automatically - if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE) - continue; - - if ((pAd->MacTab.Size == 1) || (pEntry->ValidAsDls)) - { - Rssi = RTMPMaxRssi(pAd, - pAd->StaCfg.RssiSample.AvgRssi0, - pAd->StaCfg.RssiSample.AvgRssi1, - pAd->StaCfg.RssiSample.AvgRssi2); - - // Update statistic counter - RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word); - RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word); - pAd->bUpdateBcnCntDone = TRUE; - TxRetransmit = StaTx1.field.TxRetransmit; - TxSuccess = StaTx1.field.TxSuccess; - TxFailCount = TxStaCnt0.field.TxFailCount; - TxTotalCnt = TxRetransmit + TxSuccess + TxFailCount; - - pAd->RalinkCounters.OneSecTxRetryOkCount += StaTx1.field.TxRetransmit; - pAd->RalinkCounters.OneSecTxNoRetryOkCount += StaTx1.field.TxSuccess; - pAd->RalinkCounters.OneSecTxFailCount += TxStaCnt0.field.TxFailCount; - pAd->WlanCounters.TransmittedFragmentCount.u.LowPart += StaTx1.field.TxSuccess; - pAd->WlanCounters.RetryCount.u.LowPart += StaTx1.field.TxRetransmit; - pAd->WlanCounters.FailedCount.u.LowPart += TxStaCnt0.field.TxFailCount; - - // if no traffic in the past 1-sec period, don't change TX rate, - // but clear all bad history. because the bad history may affect the next - // Chariot throughput test - AccuTxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount + - pAd->RalinkCounters.OneSecTxRetryOkCount + - pAd->RalinkCounters.OneSecTxFailCount; - - if (TxTotalCnt) - TxErrorRatio = ((TxRetransmit + TxFailCount) * 100) / TxTotalCnt; - } - else - { - if (INFRA_ON(pAd) && (i == 1)) - Rssi = RTMPMaxRssi(pAd, - pAd->StaCfg.RssiSample.AvgRssi0, - pAd->StaCfg.RssiSample.AvgRssi1, - pAd->StaCfg.RssiSample.AvgRssi2); - else - Rssi = RTMPMaxRssi(pAd, - pEntry->RssiSample.AvgRssi0, - pEntry->RssiSample.AvgRssi1, - pEntry->RssiSample.AvgRssi2); - - TxTotalCnt = pEntry->OneSecTxNoRetryOkCount + - pEntry->OneSecTxRetryOkCount + - pEntry->OneSecTxFailCount; - - if (TxTotalCnt) - TxErrorRatio = ((pEntry->OneSecTxRetryOkCount + pEntry->OneSecTxFailCount) * 100) / TxTotalCnt; - } - - CurrRateIdx = pEntry->CurrTxRateIndex; - - MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &InitTxRateIdx); - - if (CurrRateIdx >= TableSize) - { - CurrRateIdx = TableSize - 1; - } - - // When switch from Fixed rate -> auto rate, the REAL TX rate might be different from pAd->CommonCfg.TxRateIndex. - // So need to sync here. - pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5]; - if ((pEntry->HTPhyMode.field.MCS != pCurrTxRate->CurrMCS) - //&& (pAd->StaCfg.bAutoTxRateSwitch == TRUE) - ) - { - - // Need to sync Real Tx rate and our record. - // Then return for next DRS. - pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(InitTxRateIdx+1)*5]; - pEntry->CurrTxRateIndex = InitTxRateIdx; - MlmeSetTxRate(pAd, pEntry, pCurrTxRate); - - // reset all OneSecTx counters - RESET_ONE_SEC_TX_CNT(pEntry); - continue; - } - - // decide the next upgrade rate and downgrade rate, if any - if ((CurrRateIdx > 0) && (CurrRateIdx < (TableSize - 1))) - { - UpRateIdx = CurrRateIdx + 1; - DownRateIdx = CurrRateIdx -1; - } - else if (CurrRateIdx == 0) - { - UpRateIdx = CurrRateIdx + 1; - DownRateIdx = CurrRateIdx; - } - else if (CurrRateIdx == (TableSize - 1)) - { - UpRateIdx = CurrRateIdx; - DownRateIdx = CurrRateIdx - 1; - } - - pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5]; - -#ifdef DOT11_N_SUPPORT - if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX)) - { - TrainUp = (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1)); - TrainDown = (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1)); - } - else -#endif // DOT11_N_SUPPORT // - { - TrainUp = pCurrTxRate->TrainUp; - TrainDown = pCurrTxRate->TrainDown; - } - - //pAd->DrsCounters.LastTimeTxRateChangeAction = pAd->DrsCounters.LastSecTxRateChangeAction; - - // - // Keep the last time TxRateChangeAction status. - // - pEntry->LastTimeTxRateChangeAction = pEntry->LastSecTxRateChangeAction; - - - - // - // CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI - // (criteria copied from RT2500 for Netopia case) - // - if (TxTotalCnt <= 15) - { - CHAR idx = 0; - UCHAR TxRateIdx; - //UCHAR MCS0 = 0, MCS1 = 0, MCS2 = 0, MCS3 = 0, MCS4 = 0, MCS7 = 0, MCS12 = 0, MCS13 = 0, MCS14 = 0, MCS15 = 0; - UCHAR MCS0 = 0, MCS1 = 0, MCS2 = 0, MCS3 = 0, MCS4 = 0, MCS5 =0, MCS6 = 0, MCS7 = 0; - UCHAR MCS12 = 0, MCS13 = 0, MCS14 = 0, MCS15 = 0; - UCHAR MCS20 = 0, MCS21 = 0, MCS22 = 0, MCS23 = 0; // 3*3 - - // check the existence and index of each needed MCS - while (idx < pTable[0]) - { - pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(idx+1)*5]; - - if (pCurrTxRate->CurrMCS == MCS_0) - { - MCS0 = idx; - } - else if (pCurrTxRate->CurrMCS == MCS_1) - { - MCS1 = idx; - } - else if (pCurrTxRate->CurrMCS == MCS_2) - { - MCS2 = idx; - } - else if (pCurrTxRate->CurrMCS == MCS_3) - { - MCS3 = idx; - } - else if (pCurrTxRate->CurrMCS == MCS_4) - { - MCS4 = idx; - } - else if (pCurrTxRate->CurrMCS == MCS_5) - { - MCS5 = idx; - } - else if (pCurrTxRate->CurrMCS == MCS_6) - { - MCS6 = idx; - } - //else if (pCurrTxRate->CurrMCS == MCS_7) - else if ((pCurrTxRate->CurrMCS == MCS_7) && (pCurrTxRate->ShortGI == GI_800)) // prevent the highest MCS using short GI when 1T and low throughput - { - MCS7 = idx; - } - else if (pCurrTxRate->CurrMCS == MCS_12) - { - MCS12 = idx; - } - else if (pCurrTxRate->CurrMCS == MCS_13) - { - MCS13 = idx; - } - else if (pCurrTxRate->CurrMCS == MCS_14) - { - MCS14 = idx; - } - //else if ((pCurrTxRate->CurrMCS == MCS_15)/* && (pCurrTxRate->ShortGI == GI_800)*/) //we hope to use ShortGI as initial rate - else if ((pCurrTxRate->CurrMCS == MCS_15) && (pCurrTxRate->ShortGI == GI_800)) //we hope to use ShortGI as initial rate, however Atheros's chip has bugs when short GI - { - MCS15 = idx; - } - else if (pCurrTxRate->CurrMCS == MCS_20) // 3*3 - { - MCS20 = idx; - } - else if (pCurrTxRate->CurrMCS == MCS_21) - { - MCS21 = idx; - } - else if (pCurrTxRate->CurrMCS == MCS_22) - { - MCS22 = idx; - } - else if (pCurrTxRate->CurrMCS == MCS_23) - { - MCS23 = idx; - } - idx ++; - } - - if (pAd->LatchRfRegs.Channel <= 14) - { - if (pAd->NicConfig2.field.ExternalLNAForG) - { - RssiOffset = 2; - } - else - { - RssiOffset = 5; - } - } - else - { - if (pAd->NicConfig2.field.ExternalLNAForA) - { - RssiOffset = 5; - } - else - { - RssiOffset = 8; - } - } -#ifdef DOT11_N_SUPPORT - /*if (MCS15)*/ - if ((pTable == RateSwitchTable11BGN3S) || - (pTable == RateSwitchTable11N3S) || - (pTable == RateSwitchTable)) - {// N mode with 3 stream // 3*3 - if (MCS23 && (Rssi >= -70)) - TxRateIdx = MCS15; - else if (MCS22 && (Rssi >= -72)) - TxRateIdx = MCS14; - else if (MCS21 && (Rssi >= -76)) - TxRateIdx = MCS13; - else if (MCS20 && (Rssi >= -78)) - TxRateIdx = MCS12; - else if (MCS4 && (Rssi >= -82)) - TxRateIdx = MCS4; - else if (MCS3 && (Rssi >= -84)) - TxRateIdx = MCS3; - else if (MCS2 && (Rssi >= -86)) - TxRateIdx = MCS2; - else if (MCS1 && (Rssi >= -88)) - TxRateIdx = MCS1; - else - TxRateIdx = MCS0; - } -// else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) ||(pTable == RateSwitchTable11N2S) ||(pTable == RateSwitchTable11N2SForABand) || (pTable == RateSwitchTable)) - else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) ||(pTable == RateSwitchTable11N2S) ||(pTable == RateSwitchTable11N2SForABand)) // 3*3 - {// N mode with 2 stream - if (MCS15 && (Rssi >= (-70+RssiOffset))) - TxRateIdx = MCS15; - else if (MCS14 && (Rssi >= (-72+RssiOffset))) - TxRateIdx = MCS14; - else if (MCS13 && (Rssi >= (-76+RssiOffset))) - TxRateIdx = MCS13; - else if (MCS12 && (Rssi >= (-78+RssiOffset))) - TxRateIdx = MCS12; - else if (MCS4 && (Rssi >= (-82+RssiOffset))) - TxRateIdx = MCS4; - else if (MCS3 && (Rssi >= (-84+RssiOffset))) - TxRateIdx = MCS3; - else if (MCS2 && (Rssi >= (-86+RssiOffset))) - TxRateIdx = MCS2; - else if (MCS1 && (Rssi >= (-88+RssiOffset))) - TxRateIdx = MCS1; - else - TxRateIdx = MCS0; - } - else if ((pTable == RateSwitchTable11BGN1S) || (pTable == RateSwitchTable11N1S)) - {// N mode with 1 stream - if (MCS7 && (Rssi > (-72+RssiOffset))) - TxRateIdx = MCS7; - else if (MCS6 && (Rssi > (-74+RssiOffset))) - TxRateIdx = MCS6; - else if (MCS5 && (Rssi > (-77+RssiOffset))) - TxRateIdx = MCS5; - else if (MCS4 && (Rssi > (-79+RssiOffset))) - TxRateIdx = MCS4; - else if (MCS3 && (Rssi > (-81+RssiOffset))) - TxRateIdx = MCS3; - else if (MCS2 && (Rssi > (-83+RssiOffset))) - TxRateIdx = MCS2; - else if (MCS1 && (Rssi > (-86+RssiOffset))) - TxRateIdx = MCS1; - else - TxRateIdx = MCS0; - } - else -#endif // DOT11_N_SUPPORT // - {// Legacy mode - if (MCS7 && (Rssi > -70)) - TxRateIdx = MCS7; - else if (MCS6 && (Rssi > -74)) - TxRateIdx = MCS6; - else if (MCS5 && (Rssi > -78)) - TxRateIdx = MCS5; - else if (MCS4 && (Rssi > -82)) - TxRateIdx = MCS4; - else if (MCS4 == 0) // for B-only mode - TxRateIdx = MCS3; - else if (MCS3 && (Rssi > -85)) - TxRateIdx = MCS3; - else if (MCS2 && (Rssi > -87)) - TxRateIdx = MCS2; - else if (MCS1 && (Rssi > -90)) - TxRateIdx = MCS1; - else - TxRateIdx = MCS0; - } - - // if (TxRateIdx != pAd->CommonCfg.TxRateIndex) - { - pEntry->CurrTxRateIndex = TxRateIdx; - pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(pEntry->CurrTxRateIndex+1)*5]; - MlmeSetTxRate(pAd, pEntry, pNextTxRate); - } - - NdisZeroMemory(pEntry->TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH); - NdisZeroMemory(pEntry->PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH); - pEntry->fLastSecAccordingRSSI = TRUE; - // reset all OneSecTx counters - RESET_ONE_SEC_TX_CNT(pEntry); - - continue; - } - - if (pEntry->fLastSecAccordingRSSI == TRUE) - { - pEntry->fLastSecAccordingRSSI = FALSE; - pEntry->LastSecTxRateChangeAction = 0; - // reset all OneSecTx counters - RESET_ONE_SEC_TX_CNT(pEntry); - - continue; - } - - do - { - BOOLEAN bTrainUpDown = FALSE; - - pEntry->CurrTxRateStableTime ++; - - // downgrade TX quality if PER >= Rate-Down threshold - if (TxErrorRatio >= TrainDown) - { - bTrainUpDown = TRUE; - pEntry->TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND; - } - // upgrade TX quality if PER <= Rate-Up threshold - else if (TxErrorRatio <= TrainUp) - { - bTrainUpDown = TRUE; - bUpgradeQuality = TRUE; - if (pEntry->TxQuality[CurrRateIdx]) - pEntry->TxQuality[CurrRateIdx] --; // quality very good in CurrRate - - if (pEntry->TxRateUpPenalty) - pEntry->TxRateUpPenalty --; - else if (pEntry->TxQuality[UpRateIdx]) - pEntry->TxQuality[UpRateIdx] --; // may improve next UP rate's quality - } - - pEntry->PER[CurrRateIdx] = (UCHAR)TxErrorRatio; - - if (bTrainUpDown) - { - // perform DRS - consider TxRate Down first, then rate up. - if ((CurrRateIdx != DownRateIdx) && (pEntry->TxQuality[CurrRateIdx] >= DRS_TX_QUALITY_WORST_BOUND)) - { - pEntry->CurrTxRateIndex = DownRateIdx; - } - else if ((CurrRateIdx != UpRateIdx) && (pEntry->TxQuality[UpRateIdx] <= 0)) - { - pEntry->CurrTxRateIndex = UpRateIdx; - } - } - } while (FALSE); - - // if rate-up happen, clear all bad history of all TX rates - if (pEntry->CurrTxRateIndex > CurrRateIdx) - { - pEntry->CurrTxRateStableTime = 0; - pEntry->TxRateUpPenalty = 0; - pEntry->LastSecTxRateChangeAction = 1; // rate UP - NdisZeroMemory(pEntry->TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH); - NdisZeroMemory(pEntry->PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH); - - // - // For TxRate fast train up - // - if (!pAd->StaCfg.StaQuickResponeForRateUpTimerRunning) - { - RTMPSetTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, 100); - - pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = TRUE; - } - bTxRateChanged = TRUE; - } - // if rate-down happen, only clear DownRate's bad history - else if (pEntry->CurrTxRateIndex < CurrRateIdx) - { - pEntry->CurrTxRateStableTime = 0; - pEntry->TxRateUpPenalty = 0; // no penalty - pEntry->LastSecTxRateChangeAction = 2; // rate DOWN - pEntry->TxQuality[pEntry->CurrTxRateIndex] = 0; - pEntry->PER[pEntry->CurrTxRateIndex] = 0; - - // - // For TxRate fast train down - // - if (!pAd->StaCfg.StaQuickResponeForRateUpTimerRunning) - { - RTMPSetTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, 100); - - pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = TRUE; - } - bTxRateChanged = TRUE; - } - else - { - pEntry->LastSecTxRateChangeAction = 0; // rate no change - bTxRateChanged = FALSE; - } - - pEntry->LastTxOkCount = TxSuccess; - - // reset all OneSecTx counters - RESET_ONE_SEC_TX_CNT(pEntry); - - pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(pEntry->CurrTxRateIndex+1)*5]; - if (bTxRateChanged && pNextTxRate) - { - MlmeSetTxRate(pAd, pEntry, pNextTxRate); - } - } -} - -/* - ======================================================================== - Routine Description: - Station side, Auto TxRate faster train up timer call back function. - - Arguments: - SystemSpecific1 - Not used. - FunctionContext - Pointer to our Adapter context. - SystemSpecific2 - Not used. - SystemSpecific3 - Not used. - - Return Value: - None - - ======================================================================== -*/ -VOID StaQuickResponeForRateUpExec( - IN PVOID SystemSpecific1, - IN PVOID FunctionContext, - IN PVOID SystemSpecific2, - IN PVOID SystemSpecific3) -{ - PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)FunctionContext; - UCHAR UpRateIdx = 0, DownRateIdx = 0, CurrRateIdx = 0; - ULONG TxTotalCnt; - ULONG TxErrorRatio = 0; - BOOLEAN bTxRateChanged; //, bUpgradeQuality = FALSE; - PRTMP_TX_RATE_SWITCH pCurrTxRate, pNextTxRate = NULL; - PUCHAR pTable; - UCHAR TableSize = 0; - UCHAR InitTxRateIdx = 0, TrainUp, TrainDown; - TX_STA_CNT1_STRUC StaTx1; - TX_STA_CNT0_STRUC TxStaCnt0; - CHAR Rssi, ratio; - ULONG TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0; - MAC_TABLE_ENTRY *pEntry; - ULONG i; - - pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE; - - // - // walk through MAC table, see if need to change AP's TX rate toward each entry - // - for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++) - { - pEntry = &pAd->MacTab.Content[i]; - - // check if this entry need to switch rate automatically - if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE) - continue; - - if (INFRA_ON(pAd) && (i == 1)) - Rssi = RTMPMaxRssi(pAd, - pAd->StaCfg.RssiSample.AvgRssi0, - pAd->StaCfg.RssiSample.AvgRssi1, - pAd->StaCfg.RssiSample.AvgRssi2); - else - Rssi = RTMPMaxRssi(pAd, - pEntry->RssiSample.AvgRssi0, - pEntry->RssiSample.AvgRssi1, - pEntry->RssiSample.AvgRssi2); - - CurrRateIdx = pAd->CommonCfg.TxRateIndex; - - MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &InitTxRateIdx); - - // decide the next upgrade rate and downgrade rate, if any - if ((CurrRateIdx > 0) && (CurrRateIdx < (TableSize - 1))) - { - UpRateIdx = CurrRateIdx + 1; - DownRateIdx = CurrRateIdx -1; - } - else if (CurrRateIdx == 0) - { - UpRateIdx = CurrRateIdx + 1; - DownRateIdx = CurrRateIdx; - } - else if (CurrRateIdx == (TableSize - 1)) - { - UpRateIdx = CurrRateIdx; - DownRateIdx = CurrRateIdx - 1; - } - - pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5]; - -#ifdef DOT11_N_SUPPORT - if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX)) - { - TrainUp = (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1)); - TrainDown = (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1)); - } - else -#endif // DOT11_N_SUPPORT // - { - TrainUp = pCurrTxRate->TrainUp; - TrainDown = pCurrTxRate->TrainDown; - } - - if (pAd->MacTab.Size == 1) - { - // Update statistic counter - RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word); - RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word); - - TxRetransmit = StaTx1.field.TxRetransmit; - TxSuccess = StaTx1.field.TxSuccess; - TxFailCount = TxStaCnt0.field.TxFailCount; - TxTotalCnt = TxRetransmit + TxSuccess + TxFailCount; - - pAd->RalinkCounters.OneSecTxRetryOkCount += StaTx1.field.TxRetransmit; - pAd->RalinkCounters.OneSecTxNoRetryOkCount += StaTx1.field.TxSuccess; - pAd->RalinkCounters.OneSecTxFailCount += TxStaCnt0.field.TxFailCount; - pAd->WlanCounters.TransmittedFragmentCount.u.LowPart += StaTx1.field.TxSuccess; - pAd->WlanCounters.RetryCount.u.LowPart += StaTx1.field.TxRetransmit; - pAd->WlanCounters.FailedCount.u.LowPart += TxStaCnt0.field.TxFailCount; - -#if 0 // test by Gary. - // if no traffic in the past 1-sec period, don't change TX rate, - // but clear all bad history. because the bad history may affect the next - // Chariot throughput test - TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount + - pAd->RalinkCounters.OneSecTxRetryOkCount + - pAd->RalinkCounters.OneSecTxFailCount; -#endif - if (TxTotalCnt) - TxErrorRatio = ((TxRetransmit + TxFailCount) * 100) / TxTotalCnt; - } - else - { - TxTotalCnt = pEntry->OneSecTxNoRetryOkCount + - pEntry->OneSecTxRetryOkCount + - pEntry->OneSecTxFailCount; - - if (TxTotalCnt) - TxErrorRatio = ((pEntry->OneSecTxRetryOkCount + pEntry->OneSecTxFailCount) * 100) / TxTotalCnt; - } - - - // - // CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI - // (criteria copied from RT2500 for Netopia case) - // - if (TxTotalCnt <= 12) - { - NdisZeroMemory(pAd->DrsCounters.TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH); - NdisZeroMemory(pAd->DrsCounters.PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH); - - if ((pAd->DrsCounters.LastSecTxRateChangeAction == 1) && (CurrRateIdx != DownRateIdx)) - { - pAd->CommonCfg.TxRateIndex = DownRateIdx; - pAd->DrsCounters.TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND; - } - else if ((pAd->DrsCounters.LastSecTxRateChangeAction == 2) && (CurrRateIdx != UpRateIdx)) - { - pAd->CommonCfg.TxRateIndex = UpRateIdx; - } - - DBGPRINT_RAW(RT_DEBUG_TRACE,("QuickDRS: TxTotalCnt <= 15, train back to original rate \n")); - return; - } - - do - { - ULONG OneSecTxNoRetryOKRationCount; - - if (pAd->DrsCounters.LastTimeTxRateChangeAction == 0) - ratio = 5; - else - ratio = 4; - - // downgrade TX quality if PER >= Rate-Down threshold - if (TxErrorRatio >= TrainDown) - { - pAd->DrsCounters.TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND; - } - - pAd->DrsCounters.PER[CurrRateIdx] = (UCHAR)TxErrorRatio; - - OneSecTxNoRetryOKRationCount = (TxSuccess * ratio); - - // perform DRS - consider TxRate Down first, then rate up. - if ((pAd->DrsCounters.LastSecTxRateChangeAction == 1) && (CurrRateIdx != DownRateIdx)) - { - if ((pAd->DrsCounters.LastTxOkCount + 2) >= OneSecTxNoRetryOKRationCount) - { - pAd->CommonCfg.TxRateIndex = DownRateIdx; - pAd->DrsCounters.TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND; - - } - - } - else if ((pAd->DrsCounters.LastSecTxRateChangeAction == 2) && (CurrRateIdx != UpRateIdx)) - { - if ((TxErrorRatio >= 50) || (TxErrorRatio >= TrainDown)) - { - - } - else if ((pAd->DrsCounters.LastTxOkCount + 2) >= OneSecTxNoRetryOKRationCount) - { - pAd->CommonCfg.TxRateIndex = UpRateIdx; - } - } - }while (FALSE); - - // if rate-up happen, clear all bad history of all TX rates - if (pAd->CommonCfg.TxRateIndex > CurrRateIdx) - { - pAd->DrsCounters.TxRateUpPenalty = 0; - NdisZeroMemory(pAd->DrsCounters.TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH); - NdisZeroMemory(pAd->DrsCounters.PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH); - bTxRateChanged = TRUE; - } - // if rate-down happen, only clear DownRate's bad history - else if (pAd->CommonCfg.TxRateIndex < CurrRateIdx) - { - DBGPRINT_RAW(RT_DEBUG_TRACE,("QuickDRS: --TX rate from %d to %d \n", CurrRateIdx, pAd->CommonCfg.TxRateIndex)); - - pAd->DrsCounters.TxRateUpPenalty = 0; // no penalty - pAd->DrsCounters.TxQuality[pAd->CommonCfg.TxRateIndex] = 0; - pAd->DrsCounters.PER[pAd->CommonCfg.TxRateIndex] = 0; - bTxRateChanged = TRUE; - } - else - { - bTxRateChanged = FALSE; - } - - pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(pAd->CommonCfg.TxRateIndex+1)*5]; - if (bTxRateChanged && pNextTxRate) - { - MlmeSetTxRate(pAd, pEntry, pNextTxRate); - } - } -} - -/* - ========================================================================== - Description: - This routine is executed periodically inside MlmePeriodicExec() after - association with an AP. - It checks if StaCfg.Psm is consistent with user policy (recorded in - StaCfg.WindowsPowerMode). If not, enforce user policy. However, - there're some conditions to consider: - 1. we don't support power-saving in ADHOC mode, so Psm=PWR_ACTIVE all - the time when Mibss==TRUE - 2. When link up in INFRA mode, Psm should not be switch to PWR_SAVE - if outgoing traffic available in TxRing or MgmtRing. - Output: - 1. change pAd->StaCfg.Psm to PWR_SAVE or leave it untouched - - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID MlmeCheckPsmChange( - IN PRTMP_ADAPTER pAd, - IN ULONG Now32) -{ - ULONG PowerMode; - - // condition - - // 1. Psm maybe ON only happen in INFRASTRUCTURE mode - // 2. user wants either MAX_PSP or FAST_PSP - // 3. but current psm is not in PWR_SAVE - // 4. CNTL state machine is not doing SCANning - // 5. no TX SUCCESS event for the past 1-sec period -#ifdef NDIS51_MINIPORT - if (pAd->StaCfg.WindowsPowerProfile == NdisPowerProfileBattery) - PowerMode = pAd->StaCfg.WindowsBatteryPowerMode; - else -#endif - PowerMode = pAd->StaCfg.WindowsPowerMode; - - if (INFRA_ON(pAd) && - (PowerMode != Ndis802_11PowerModeCAM) && - (pAd->StaCfg.Psm == PWR_ACTIVE) && -// (! RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) - (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) /*&& - (pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) && - (pAd->RalinkCounters.OneSecTxRetryOkCount == 0)*/) - { - NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime); - pAd->RalinkCounters.RxCountSinceLastNULL = 0; - MlmeSetPsmBit(pAd, PWR_SAVE); - if (!(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable)) - { - RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, FALSE); - } - else - { - RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE); - } - } -} - -// IRQL = PASSIVE_LEVEL -// IRQL = DISPATCH_LEVEL -VOID MlmeSetPsmBit( - IN PRTMP_ADAPTER pAd, - IN USHORT psm) -{ - AUTO_RSP_CFG_STRUC csr4; - - pAd->StaCfg.Psm = psm; - RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word); - csr4.field.AckCtsPsmBit = (psm == PWR_SAVE)? 1:0; - RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word); - DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetPsmBit = %d\n", psm)); -} -#endif // CONFIG_STA_SUPPORT // - - -// IRQL = DISPATCH_LEVEL -VOID MlmeSetTxPreamble( - IN PRTMP_ADAPTER pAd, - IN USHORT TxPreamble) -{ - AUTO_RSP_CFG_STRUC csr4; - - // - // Always use Long preamble before verifiation short preamble functionality works well. - // Todo: remove the following line if short preamble functionality works - // - //TxPreamble = Rt802_11PreambleLong; - - RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word); - if (TxPreamble == Rt802_11PreambleLong) - { - DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetTxPreamble (= LONG PREAMBLE)\n")); - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED); - csr4.field.AutoResponderPreamble = 0; - } - else - { - // NOTE: 1Mbps should always use long preamble - DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetTxPreamble (= SHORT PREAMBLE)\n")); - OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED); - csr4.field.AutoResponderPreamble = 1; - } - - RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word); -} - -/* - ========================================================================== - Description: - Update basic rate bitmap - ========================================================================== - */ - -VOID UpdateBasicRateBitmap( - IN PRTMP_ADAPTER pAdapter) -{ - INT i, j; - /* 1 2 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */ - UCHAR rate[] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 }; - UCHAR *sup_p = pAdapter->CommonCfg.SupRate; - UCHAR *ext_p = pAdapter->CommonCfg.ExtRate; - ULONG bitmap = pAdapter->CommonCfg.BasicRateBitmap; - - - /* if A mode, always use fix BasicRateBitMap */ - //if (pAdapter->CommonCfg.Channel == PHY_11A) - if (pAdapter->CommonCfg.Channel > 14) - pAdapter->CommonCfg.BasicRateBitmap = 0x150; /* 6, 12, 24M */ - /* End of if */ - - if (pAdapter->CommonCfg.BasicRateBitmap > 4095) - { - /* (2 ^ MAX_LEN_OF_SUPPORTED_RATES) -1 */ - return; - } /* End of if */ - - for(i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++) - { - sup_p[i] &= 0x7f; - ext_p[i] &= 0x7f; - } /* End of for */ - - for(i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++) - { - if (bitmap & (1 << i)) - { - for(j=0; j<MAX_LEN_OF_SUPPORTED_RATES; j++) - { - if (sup_p[j] == rate[i]) - sup_p[j] |= 0x80; - /* End of if */ - } /* End of for */ - - for(j=0; j<MAX_LEN_OF_SUPPORTED_RATES; j++) - { - if (ext_p[j] == rate[i]) - ext_p[j] |= 0x80; - /* End of if */ - } /* End of for */ - } /* End of if */ - } /* End of for */ -} /* End of UpdateBasicRateBitmap */ - -// IRQL = PASSIVE_LEVEL -// IRQL = DISPATCH_LEVEL -// bLinkUp is to identify the inital link speed. -// TRUE indicates the rate update at linkup, we should not try to set the rate at 54Mbps. -VOID MlmeUpdateTxRates( - IN PRTMP_ADAPTER pAd, - IN BOOLEAN bLinkUp, - IN UCHAR apidx) -{ - int i, num; - UCHAR Rate = RATE_6, MaxDesire = RATE_1, MaxSupport = RATE_1; - UCHAR MinSupport = RATE_54; - ULONG BasicRateBitmap = 0; - UCHAR CurrBasicRate = RATE_1; - UCHAR *pSupRate, SupRateLen, *pExtRate, ExtRateLen; - PHTTRANSMIT_SETTING pHtPhy = NULL; - PHTTRANSMIT_SETTING pMaxHtPhy = NULL; - PHTTRANSMIT_SETTING pMinHtPhy = NULL; - BOOLEAN *auto_rate_cur_p; - UCHAR HtMcs = MCS_AUTO; - - // find max desired rate - UpdateBasicRateBitmap(pAd); - - num = 0; - auto_rate_cur_p = NULL; - for (i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++) - { - switch (pAd->CommonCfg.DesireRate[i] & 0x7f) - { - case 2: Rate = RATE_1; num++; break; - case 4: Rate = RATE_2; num++; break; - case 11: Rate = RATE_5_5; num++; break; - case 22: Rate = RATE_11; num++; break; - case 12: Rate = RATE_6; num++; break; - case 18: Rate = RATE_9; num++; break; - case 24: Rate = RATE_12; num++; break; - case 36: Rate = RATE_18; num++; break; - case 48: Rate = RATE_24; num++; break; - case 72: Rate = RATE_36; num++; break; - case 96: Rate = RATE_48; num++; break; - case 108: Rate = RATE_54; num++; break; - //default: Rate = RATE_1; break; - } - if (MaxDesire < Rate) MaxDesire = Rate; - } - -//=========================================================================== -//=========================================================================== - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - pHtPhy = &pAd->StaCfg.HTPhyMode; - pMaxHtPhy = &pAd->StaCfg.MaxHTPhyMode; - pMinHtPhy = &pAd->StaCfg.MinHTPhyMode; - - auto_rate_cur_p = &pAd->StaCfg.bAutoTxRateSwitch; - HtMcs = pAd->StaCfg.DesiredTransmitSetting.field.MCS; - - if ((pAd->StaCfg.BssType == BSS_ADHOC) && - (pAd->CommonCfg.PhyMode == PHY_11B) && - (MaxDesire > RATE_11)) - { - MaxDesire = RATE_11; - } - } -#endif // CONFIG_STA_SUPPORT // - - pAd->CommonCfg.MaxDesiredRate = MaxDesire; - pMinHtPhy->word = 0; - pMaxHtPhy->word = 0; - pHtPhy->word = 0; - - // Auto rate switching is enabled only if more than one DESIRED RATES are - // specified; otherwise disabled - if (num <= 1) - { - //OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED); - //pAd->CommonCfg.bAutoTxRateSwitch = FALSE; - *auto_rate_cur_p = FALSE; - } - else - { - //OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED); - //pAd->CommonCfg.bAutoTxRateSwitch = TRUE; - *auto_rate_cur_p = TRUE; - } - -#if 1 - if (HtMcs != MCS_AUTO) - { - //OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED); - //pAd->CommonCfg.bAutoTxRateSwitch = FALSE; - *auto_rate_cur_p = FALSE; - } - else - { - //OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED); - //pAd->CommonCfg.bAutoTxRateSwitch = TRUE; - *auto_rate_cur_p = TRUE; - } -#endif - -#ifdef CONFIG_STA_SUPPORT - if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) - { - pSupRate = &pAd->StaActive.SupRate[0]; - pExtRate = &pAd->StaActive.ExtRate[0]; - SupRateLen = pAd->StaActive.SupRateLen; - ExtRateLen = pAd->StaActive.ExtRateLen; - } - else -#endif // CONFIG_STA_SUPPORT // - { - pSupRate = &pAd->CommonCfg.SupRate[0]; - pExtRate = &pAd->CommonCfg.ExtRate[0]; - SupRateLen = pAd->CommonCfg.SupRateLen; - ExtRateLen = pAd->CommonCfg.ExtRateLen; - } - - // find max supported rate - for (i=0; i<SupRateLen; i++) - { - switch (pSupRate[i] & 0x7f) - { - case 2: Rate = RATE_1; if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0001; break; - case 4: Rate = RATE_2; if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0002; break; - case 11: Rate = RATE_5_5; if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0004; break; - case 22: Rate = RATE_11; if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0008; break; - case 12: Rate = RATE_6; /*if (pSupRate[i] & 0x80)*/ BasicRateBitmap |= 0x0010; break; - case 18: Rate = RATE_9; if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0020; break; - case 24: Rate = RATE_12; /*if (pSupRate[i] & 0x80)*/ BasicRateBitmap |= 0x0040; break; - case 36: Rate = RATE_18; if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0080; break; - case 48: Rate = RATE_24; /*if (pSupRate[i] & 0x80)*/ BasicRateBitmap |= 0x0100; break; - case 72: Rate = RATE_36; if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0200; break; - case 96: Rate = RATE_48; if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0400; break; - case 108: Rate = RATE_54; if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0800; break; - default: Rate = RATE_1; break; - } - if (MaxSupport < Rate) MaxSupport = Rate; - - if (MinSupport > Rate) MinSupport = Rate; - } - - for (i=0; i<ExtRateLen; i++) - { - switch (pExtRate[i] & 0x7f) - { - case 2: Rate = RATE_1; if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0001; break; - case 4: Rate = RATE_2; if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0002; break; - case 11: Rate = RATE_5_5; if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0004; break; - case 22: Rate = RATE_11; if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0008; break; - case 12: Rate = RATE_6; /*if (pExtRate[i] & 0x80)*/ BasicRateBitmap |= 0x0010; break; - case 18: Rate = RATE_9; if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0020; break; - case 24: Rate = RATE_12; /*if (pExtRate[i] & 0x80)*/ BasicRateBitmap |= 0x0040; break; - case 36: Rate = RATE_18; if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0080; break; - case 48: Rate = RATE_24; /*if (pExtRate[i] & 0x80)*/ BasicRateBitmap |= 0x0100; break; - case 72: Rate = RATE_36; if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0200; break; - case 96: Rate = RATE_48; if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0400; break; - case 108: Rate = RATE_54; if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0800; break; - default: Rate = RATE_1; break; - } - if (MaxSupport < Rate) MaxSupport = Rate; - - if (MinSupport > Rate) MinSupport = Rate; - } - - RTMP_IO_WRITE32(pAd, LEGACY_BASIC_RATE, BasicRateBitmap); - - // bug fix - // pAd->CommonCfg.BasicRateBitmap = BasicRateBitmap; - - // calculate the exptected ACK rate for each TX rate. This info is used to caculate - // the DURATION field of outgoing uniicast DATA/MGMT frame - for (i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++) - { - if (BasicRateBitmap & (0x01 << i)) - CurrBasicRate = (UCHAR)i; - pAd->CommonCfg.ExpectedACKRate[i] = CurrBasicRate; - } - - DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateTxRates[MaxSupport = %d] = MaxDesire %d Mbps\n", RateIdToMbps[MaxSupport], RateIdToMbps[MaxDesire])); - // max tx rate = min {max desire rate, max supported rate} - if (MaxSupport < MaxDesire) - pAd->CommonCfg.MaxTxRate = MaxSupport; - else - pAd->CommonCfg.MaxTxRate = MaxDesire; - - pAd->CommonCfg.MinTxRate = MinSupport; - // 2003-07-31 john - 2500 doesn't have good sensitivity at high OFDM rates. to increase the success - // ratio of initial DHCP packet exchange, TX rate starts from a lower rate depending - // on average RSSI - // 1. RSSI >= -70db, start at 54 Mbps (short distance) - // 2. -70 > RSSI >= -75, start at 24 Mbps (mid distance) - // 3. -75 > RSSI, start at 11 Mbps (long distance) - //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)/* && - // OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)*/) - if (*auto_rate_cur_p) - { - short dbm = 0; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - dbm = pAd->StaCfg.RssiSample.AvgRssi0 - pAd->BbpRssiToDbmDelta; -#endif // CONFIG_STA_SUPPORT // - if (bLinkUp == TRUE) - pAd->CommonCfg.TxRate = RATE_24; - else - pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate; - - if (dbm < -75) - pAd->CommonCfg.TxRate = RATE_11; - else if (dbm < -70) - pAd->CommonCfg.TxRate = RATE_24; - - // should never exceed MaxTxRate (consider 11B-only mode) - if (pAd->CommonCfg.TxRate > pAd->CommonCfg.MaxTxRate) - pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate; - - pAd->CommonCfg.TxRateIndex = 0; - } - else - { - pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate; - pHtPhy->field.MCS = (pAd->CommonCfg.MaxTxRate > 3) ? (pAd->CommonCfg.MaxTxRate - 4) : pAd->CommonCfg.MaxTxRate; - pHtPhy->field.MODE = (pAd->CommonCfg.MaxTxRate > 3) ? MODE_OFDM : MODE_CCK; - - pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.STBC = pHtPhy->field.STBC; - pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.ShortGI = pHtPhy->field.ShortGI; - pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MCS = pHtPhy->field.MCS; - pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE = pHtPhy->field.MODE; - } - - if (pAd->CommonCfg.TxRate <= RATE_11) - { - pMaxHtPhy->field.MODE = MODE_CCK; - pMaxHtPhy->field.MCS = pAd->CommonCfg.TxRate; - pMinHtPhy->field.MCS = pAd->CommonCfg.MinTxRate; - } - else - { - pMaxHtPhy->field.MODE = MODE_OFDM; - pMaxHtPhy->field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.TxRate]; - if (pAd->CommonCfg.MinTxRate >= RATE_6 && (pAd->CommonCfg.MinTxRate <= RATE_54)) - {pMinHtPhy->field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MinTxRate];} - else - {pMinHtPhy->field.MCS = pAd->CommonCfg.MinTxRate;} - } - - pHtPhy->word = (pMaxHtPhy->word); - if (bLinkUp && (pAd->OpMode == OPMODE_STA)) - { - pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word = pHtPhy->word; - pAd->MacTab.Content[BSSID_WCID].MaxHTPhyMode.word = pMaxHtPhy->word; - pAd->MacTab.Content[BSSID_WCID].MinHTPhyMode.word = pMinHtPhy->word; - } - else - { - switch (pAd->CommonCfg.PhyMode) - { - case PHY_11BG_MIXED: - case PHY_11B: -#ifdef DOT11_N_SUPPORT - case PHY_11BGN_MIXED: -#endif // DOT11_N_SUPPORT // - pAd->CommonCfg.MlmeRate = RATE_1; - pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK; - pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1; - -//#ifdef WIFI_TEST - pAd->CommonCfg.RtsRate = RATE_11; -//#else -// pAd->CommonCfg.RtsRate = RATE_1; -//#endif - break; - case PHY_11G: - case PHY_11A: -#ifdef DOT11_N_SUPPORT - case PHY_11AGN_MIXED: - case PHY_11GN_MIXED: - case PHY_11N_2_4G: - case PHY_11AN_MIXED: - case PHY_11N_5G: -#endif // DOT11_N_SUPPORT // - pAd->CommonCfg.MlmeRate = RATE_6; - pAd->CommonCfg.RtsRate = RATE_6; - pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM; - pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate]; - break; - case PHY_11ABG_MIXED: -#ifdef DOT11_N_SUPPORT - case PHY_11ABGN_MIXED: -#endif // DOT11_N_SUPPORT // - if (pAd->CommonCfg.Channel <= 14) - { - pAd->CommonCfg.MlmeRate = RATE_1; - pAd->CommonCfg.RtsRate = RATE_1; - pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK; - pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1; - } - else - { - pAd->CommonCfg.MlmeRate = RATE_6; - pAd->CommonCfg.RtsRate = RATE_6; - pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM; - pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate]; - } - break; - default: // error - pAd->CommonCfg.MlmeRate = RATE_6; - pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM; - pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate]; - pAd->CommonCfg.RtsRate = RATE_1; - break; - } - // - // Keep Basic Mlme Rate. - // - pAd->MacTab.Content[MCAST_WCID].HTPhyMode.word = pAd->CommonCfg.MlmeTransmit.word; - if (pAd->CommonCfg.MlmeTransmit.field.MODE == MODE_OFDM) - pAd->MacTab.Content[MCAST_WCID].HTPhyMode.field.MCS = OfdmRateToRxwiMCS[RATE_24]; - else - pAd->MacTab.Content[MCAST_WCID].HTPhyMode.field.MCS = RATE_1; - pAd->CommonCfg.BasicMlmeRate = pAd->CommonCfg.MlmeRate; - } - - DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (MaxDesire=%d, MaxSupport=%d, MaxTxRate=%d, MinRate=%d, Rate Switching =%d)\n", - RateIdToMbps[MaxDesire], RateIdToMbps[MaxSupport], RateIdToMbps[pAd->CommonCfg.MaxTxRate], RateIdToMbps[pAd->CommonCfg.MinTxRate], - /*OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)*/*auto_rate_cur_p)); - DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (TxRate=%d, RtsRate=%d, BasicRateBitmap=0x%04lx)\n", - RateIdToMbps[pAd->CommonCfg.TxRate], RateIdToMbps[pAd->CommonCfg.RtsRate], BasicRateBitmap)); - DBGPRINT(RT_DEBUG_TRACE, ("MlmeUpdateTxRates (MlmeTransmit=0x%x, MinHTPhyMode=%x, MaxHTPhyMode=0x%x, HTPhyMode=0x%x)\n", - pAd->CommonCfg.MlmeTransmit.word, pAd->MacTab.Content[BSSID_WCID].MinHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].MaxHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word )); -} - -#ifdef DOT11_N_SUPPORT -/* - ========================================================================== - Description: - This function update HT Rate setting. - Input Wcid value is valid for 2 case : - 1. it's used for Station in infra mode that copy AP rate to Mactable. - 2. OR Station in adhoc mode to copy peer's HT rate to Mactable. - - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID MlmeUpdateHtTxRates( - IN PRTMP_ADAPTER pAd, - IN UCHAR apidx) -{ - UCHAR StbcMcs; //j, StbcMcs, bitmask; - CHAR i; // 3*3 - RT_HT_CAPABILITY *pRtHtCap = NULL; - RT_HT_PHY_INFO *pActiveHtPhy = NULL; - ULONG BasicMCS; - UCHAR j, bitmask; - PRT_HT_PHY_INFO pDesireHtPhy = NULL; - PHTTRANSMIT_SETTING pHtPhy = NULL; - PHTTRANSMIT_SETTING pMaxHtPhy = NULL; - PHTTRANSMIT_SETTING pMinHtPhy = NULL; - BOOLEAN *auto_rate_cur_p; - - DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates===> \n")); - - auto_rate_cur_p = NULL; - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - pDesireHtPhy = &pAd->StaCfg.DesiredHtPhyInfo; - pActiveHtPhy = &pAd->StaCfg.DesiredHtPhyInfo; - pHtPhy = &pAd->StaCfg.HTPhyMode; - pMaxHtPhy = &pAd->StaCfg.MaxHTPhyMode; - pMinHtPhy = &pAd->StaCfg.MinHTPhyMode; - - auto_rate_cur_p = &pAd->StaCfg.bAutoTxRateSwitch; - } -#endif // CONFIG_STA_SUPPORT // - -#ifdef CONFIG_STA_SUPPORT - if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) - { - if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) - return; - - pRtHtCap = &pAd->StaActive.SupportedHtPhy; - pActiveHtPhy = &pAd->StaActive.SupportedPhyInfo; - StbcMcs = (UCHAR)pAd->MlmeAux.AddHtInfo.AddHtInfo3.StbcMcs; - BasicMCS =pAd->MlmeAux.AddHtInfo.MCSSet[0]+(pAd->MlmeAux.AddHtInfo.MCSSet[1]<<8)+(StbcMcs<<16); - if ((pAd->CommonCfg.DesiredHtPhy.TxSTBC) && (pRtHtCap->RxSTBC) && (pAd->Antenna.field.TxPath == 2)) - pMaxHtPhy->field.STBC = STBC_USE; - else - pMaxHtPhy->field.STBC = STBC_NONE; - } - else -#endif // CONFIG_STA_SUPPORT // - { - if (pDesireHtPhy->bHtEnable == FALSE) - return; - - pRtHtCap = &pAd->CommonCfg.DesiredHtPhy; - StbcMcs = (UCHAR)pAd->CommonCfg.AddHTInfo.AddHtInfo3.StbcMcs; - BasicMCS = pAd->CommonCfg.AddHTInfo.MCSSet[0]+(pAd->CommonCfg.AddHTInfo.MCSSet[1]<<8)+(StbcMcs<<16); - if ((pAd->CommonCfg.DesiredHtPhy.TxSTBC) && (pRtHtCap->RxSTBC) && (pAd->Antenna.field.TxPath == 2)) - pMaxHtPhy->field.STBC = STBC_USE; - else - pMaxHtPhy->field.STBC = STBC_NONE; - } - - // Decide MAX ht rate. - if ((pRtHtCap->GF) && (pAd->CommonCfg.DesiredHtPhy.GF)) - pMaxHtPhy->field.MODE = MODE_HTGREENFIELD; - else - pMaxHtPhy->field.MODE = MODE_HTMIX; - - if ((pAd->CommonCfg.DesiredHtPhy.ChannelWidth) && (pRtHtCap->ChannelWidth)) - pMaxHtPhy->field.BW = BW_40; - else - pMaxHtPhy->field.BW = BW_20; - - if (pMaxHtPhy->field.BW == BW_20) - pMaxHtPhy->field.ShortGI = (pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 & pRtHtCap->ShortGIfor20); - else - pMaxHtPhy->field.ShortGI = (pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 & pRtHtCap->ShortGIfor40); - - for (i=23; i>=0; i--) // 3*3 - { - j = i/8; - bitmask = (1<<(i-(j*8))); - - if ((pActiveHtPhy->MCSSet[j] & bitmask) && (pDesireHtPhy->MCSSet[j] & bitmask)) - { - pMaxHtPhy->field.MCS = i; - break; - } - - if (i==0) - break; - } - - // Copy MIN ht rate. rt2860??? - pMinHtPhy->field.BW = BW_20; - pMinHtPhy->field.MCS = 0; - pMinHtPhy->field.STBC = 0; - pMinHtPhy->field.ShortGI = 0; - //If STA assigns fixed rate. update to fixed here. -#ifdef CONFIG_STA_SUPPORT - if ( (pAd->OpMode == OPMODE_STA) && (pDesireHtPhy->MCSSet[0] != 0xff)) - { - if (pDesireHtPhy->MCSSet[4] != 0) - { - pMaxHtPhy->field.MCS = 32; - pMinHtPhy->field.MCS = 32; - DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates<=== Use Fixed MCS = %d\n",pMinHtPhy->field.MCS)); - } - - for (i=23; (CHAR)i >= 0; i--) // 3*3 - { - j = i/8; - bitmask = (1<<(i-(j*8))); - if ( (pDesireHtPhy->MCSSet[j] & bitmask) && (pActiveHtPhy->MCSSet[j] & bitmask)) - { - pMaxHtPhy->field.MCS = i; - pMinHtPhy->field.MCS = i; - break; - } - if (i==0) - break; - } - } -#endif // CONFIG_STA_SUPPORT // - - - // Decide ht rate - pHtPhy->field.STBC = pMaxHtPhy->field.STBC; - pHtPhy->field.BW = pMaxHtPhy->field.BW; - pHtPhy->field.MODE = pMaxHtPhy->field.MODE; - pHtPhy->field.MCS = pMaxHtPhy->field.MCS; - pHtPhy->field.ShortGI = pMaxHtPhy->field.ShortGI; - - // use default now. rt2860 - if (pDesireHtPhy->MCSSet[0] != 0xff) - *auto_rate_cur_p = FALSE; - else - *auto_rate_cur_p = TRUE; - - DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateHtTxRates<---.AMsduSize = %d \n", pAd->CommonCfg.DesiredHtPhy.AmsduSize )); - DBGPRINT(RT_DEBUG_TRACE,("TX: MCS[0] = %x (choose %d), BW = %d, ShortGI = %d, MODE = %d, \n", pActiveHtPhy->MCSSet[0],pHtPhy->field.MCS, - pHtPhy->field.BW, pHtPhy->field.ShortGI, pHtPhy->field.MODE)); - DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates<=== \n")); -} -#endif // DOT11_N_SUPPORT // - -// IRQL = DISPATCH_LEVEL -VOID MlmeRadioOff( - IN PRTMP_ADAPTER pAd) -{ - RT28XX_MLME_RADIO_OFF(pAd); -} - -// IRQL = DISPATCH_LEVEL -VOID MlmeRadioOn( - IN PRTMP_ADAPTER pAd) -{ - RT28XX_MLME_RADIO_ON(pAd); -} - -// =========================================================================================== -// bss_table.c -// =========================================================================================== - - -/*! \brief initialize BSS table - * \param p_tab pointer to the table - * \return none - * \pre - * \post - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - */ -VOID BssTableInit( - IN BSS_TABLE *Tab) -{ - int i; - - Tab->BssNr = 0; - Tab->BssOverlapNr = 0; - for (i = 0; i < MAX_LEN_OF_BSS_TABLE; i++) - { - NdisZeroMemory(&Tab->BssEntry[i], sizeof(BSS_ENTRY)); - Tab->BssEntry[i].Rssi = -127; // initial the rssi as a minimum value - } -} - -#ifdef DOT11_N_SUPPORT -VOID BATableInit( - IN PRTMP_ADAPTER pAd, - IN BA_TABLE *Tab) -{ - int i; - - Tab->numAsOriginator = 0; - Tab->numAsRecipient = 0; - NdisAllocateSpinLock(&pAd->BATabLock); - for (i = 0; i < MAX_LEN_OF_BA_REC_TABLE; i++) - { - Tab->BARecEntry[i].REC_BA_Status = Recipient_NONE; - NdisAllocateSpinLock(&(Tab->BARecEntry[i].RxReRingLock)); - } - for (i = 0; i < MAX_LEN_OF_BA_ORI_TABLE; i++) - { - Tab->BAOriEntry[i].ORI_BA_Status = Originator_NONE; - } -} -#endif // DOT11_N_SUPPORT // - -/*! \brief search the BSS table by SSID - * \param p_tab pointer to the bss table - * \param ssid SSID string - * \return index of the table, BSS_NOT_FOUND if not in the table - * \pre - * \post - * \note search by sequential search - - IRQL = DISPATCH_LEVEL - - */ -ULONG BssTableSearch( - IN BSS_TABLE *Tab, - IN PUCHAR pBssid, - IN UCHAR Channel) -{ - UCHAR i; - - for (i = 0; i < Tab->BssNr; i++) - { - // - // Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G. - // We should distinguish this case. - // - if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) || - ((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) && - MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid)) - { - return i; - } - } - return (ULONG)BSS_NOT_FOUND; -} - -ULONG BssSsidTableSearch( - IN BSS_TABLE *Tab, - IN PUCHAR pBssid, - IN PUCHAR pSsid, - IN UCHAR SsidLen, - IN UCHAR Channel) -{ - UCHAR i; - - for (i = 0; i < Tab->BssNr; i++) - { - // - // Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G. - // We should distinguish this case. - // - if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) || - ((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) && - MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid) && - SSID_EQUAL(pSsid, SsidLen, Tab->BssEntry[i].Ssid, Tab->BssEntry[i].SsidLen)) - { - return i; - } - } - return (ULONG)BSS_NOT_FOUND; -} - -ULONG BssTableSearchWithSSID( - IN BSS_TABLE *Tab, - IN PUCHAR Bssid, - IN PUCHAR pSsid, - IN UCHAR SsidLen, - IN UCHAR Channel) -{ - UCHAR i; - - for (i = 0; i < Tab->BssNr; i++) - { - if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) || - ((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) && - MAC_ADDR_EQUAL(&(Tab->BssEntry[i].Bssid), Bssid) && - (SSID_EQUAL(pSsid, SsidLen, Tab->BssEntry[i].Ssid, Tab->BssEntry[i].SsidLen) || - (NdisEqualMemory(pSsid, ZeroSsid, SsidLen)) || - (NdisEqualMemory(Tab->BssEntry[i].Ssid, ZeroSsid, Tab->BssEntry[i].SsidLen)))) - { - return i; - } - } - return (ULONG)BSS_NOT_FOUND; -} - -// IRQL = DISPATCH_LEVEL -VOID BssTableDeleteEntry( - IN OUT BSS_TABLE *Tab, - IN PUCHAR pBssid, - IN UCHAR Channel) -{ - UCHAR i, j; - - for (i = 0; i < Tab->BssNr; i++) - { - if ((Tab->BssEntry[i].Channel == Channel) && - (MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid))) - { - for (j = i; j < Tab->BssNr - 1; j++) - { - NdisMoveMemory(&(Tab->BssEntry[j]), &(Tab->BssEntry[j + 1]), sizeof(BSS_ENTRY)); - } - NdisZeroMemory(&(Tab->BssEntry[Tab->BssNr - 1]), sizeof(BSS_ENTRY)); - Tab->BssNr -= 1; - return; - } - } -} - -#ifdef DOT11_N_SUPPORT -/* - ======================================================================== - Routine Description: - Delete the Originator Entry in BAtable. Or decrease numAs Originator by 1 if needed. - - Arguments: - // IRQL = DISPATCH_LEVEL - ======================================================================== -*/ -VOID BATableDeleteORIEntry( - IN OUT PRTMP_ADAPTER pAd, - IN BA_ORI_ENTRY *pBAORIEntry) -{ - - if (pBAORIEntry->ORI_BA_Status != Originator_NONE) - { - NdisAcquireSpinLock(&pAd->BATabLock); - if (pBAORIEntry->ORI_BA_Status == Originator_Done) - { - pAd->BATable.numAsOriginator -= 1; - DBGPRINT(RT_DEBUG_TRACE, ("BATableDeleteORIEntry numAsOriginator= %ld\n", pAd->BATable.numAsRecipient)); - // Erase Bitmap flag. - } - pAd->MacTab.Content[pBAORIEntry->Wcid].TXBAbitmap &= (~(1<<(pBAORIEntry->TID) )); // If STA mode, erase flag here - pAd->MacTab.Content[pBAORIEntry->Wcid].BAOriWcidArray[pBAORIEntry->TID] = 0; // If STA mode, erase flag here - pBAORIEntry->ORI_BA_Status = Originator_NONE; - pBAORIEntry->Token = 1; - // Not clear Sequence here. - NdisReleaseSpinLock(&pAd->BATabLock); - } -} -#endif // DOT11_N_SUPPORT // - -/*! \brief - * \param - * \return - * \pre - * \post - - IRQL = DISPATCH_LEVEL - - */ -VOID BssEntrySet( - IN PRTMP_ADAPTER pAd, - OUT BSS_ENTRY *pBss, - IN PUCHAR pBssid, - IN CHAR Ssid[], - IN UCHAR SsidLen, - IN UCHAR BssType, - IN USHORT BeaconPeriod, - IN PCF_PARM pCfParm, - IN USHORT AtimWin, - IN USHORT CapabilityInfo, - IN UCHAR SupRate[], - IN UCHAR SupRateLen, - IN UCHAR ExtRate[], - IN UCHAR ExtRateLen, - IN HT_CAPABILITY_IE *pHtCapability, - IN ADD_HT_INFO_IE *pAddHtInfo, // AP might use this additional ht info IE - IN UCHAR HtCapabilityLen, - IN UCHAR AddHtInfoLen, - IN UCHAR NewExtChanOffset, - IN UCHAR Channel, - IN CHAR Rssi, - IN LARGE_INTEGER TimeStamp, - IN UCHAR CkipFlag, - IN PEDCA_PARM pEdcaParm, - IN PQOS_CAPABILITY_PARM pQosCapability, - IN PQBSS_LOAD_PARM pQbssLoad, - IN USHORT LengthVIE, - IN PNDIS_802_11_VARIABLE_IEs pVIE) -{ - COPY_MAC_ADDR(pBss->Bssid, pBssid); - // Default Hidden SSID to be TRUE, it will be turned to FALSE after coping SSID - pBss->Hidden = 1; - if (SsidLen > 0) - { - // For hidden SSID AP, it might send beacon with SSID len equal to 0 - // Or send beacon /probe response with SSID len matching real SSID length, - // but SSID is all zero. such as "00-00-00-00" with length 4. - // We have to prevent this case overwrite correct table - if (NdisEqualMemory(Ssid, ZeroSsid, SsidLen) == 0) - { - NdisZeroMemory(pBss->Ssid, MAX_LEN_OF_SSID); - NdisMoveMemory(pBss->Ssid, Ssid, SsidLen); - pBss->SsidLen = SsidLen; - pBss->Hidden = 0; - } - } - else - pBss->SsidLen = 0; - pBss->BssType = BssType; - pBss->BeaconPeriod = BeaconPeriod; - if (BssType == BSS_INFRA) - { - if (pCfParm->bValid) - { - pBss->CfpCount = pCfParm->CfpCount; - pBss->CfpPeriod = pCfParm->CfpPeriod; - pBss->CfpMaxDuration = pCfParm->CfpMaxDuration; - pBss->CfpDurRemaining = pCfParm->CfpDurRemaining; - } - } - else - { - pBss->AtimWin = AtimWin; - } - - pBss->CapabilityInfo = CapabilityInfo; - // The privacy bit indicate security is ON, it maight be WEP, TKIP or AES - // Combine with AuthMode, they will decide the connection methods. - pBss->Privacy = CAP_IS_PRIVACY_ON(pBss->CapabilityInfo); - ASSERT(SupRateLen <= MAX_LEN_OF_SUPPORTED_RATES); - if (SupRateLen <= MAX_LEN_OF_SUPPORTED_RATES) - NdisMoveMemory(pBss->SupRate, SupRate, SupRateLen); - else - NdisMoveMemory(pBss->SupRate, SupRate, MAX_LEN_OF_SUPPORTED_RATES); - pBss->SupRateLen = SupRateLen; - ASSERT(ExtRateLen <= MAX_LEN_OF_SUPPORTED_RATES); - NdisMoveMemory(pBss->ExtRate, ExtRate, ExtRateLen); - NdisMoveMemory(&pBss->HtCapability, pHtCapability, HtCapabilityLen); - NdisMoveMemory(&pBss->AddHtInfo, pAddHtInfo, AddHtInfoLen); - pBss->NewExtChanOffset = NewExtChanOffset; - pBss->ExtRateLen = ExtRateLen; - pBss->Channel = Channel; - pBss->CentralChannel = Channel; - pBss->Rssi = Rssi; - // Update CkipFlag. if not exists, the value is 0x0 - pBss->CkipFlag = CkipFlag; - - // New for microsoft Fixed IEs - NdisMoveMemory(pBss->FixIEs.Timestamp, &TimeStamp, 8); - pBss->FixIEs.BeaconInterval = BeaconPeriod; - pBss->FixIEs.Capabilities = CapabilityInfo; - - // New for microsoft Variable IEs - if (LengthVIE != 0) - { - pBss->VarIELen = LengthVIE; - NdisMoveMemory(pBss->VarIEs, pVIE, pBss->VarIELen); - } - else - { - pBss->VarIELen = 0; - } - - pBss->AddHtInfoLen = 0; - pBss->HtCapabilityLen = 0; -#ifdef DOT11_N_SUPPORT - if (HtCapabilityLen> 0) - { - pBss->HtCapabilityLen = HtCapabilityLen; - NdisMoveMemory(&pBss->HtCapability, pHtCapability, HtCapabilityLen); - if (AddHtInfoLen > 0) - { - pBss->AddHtInfoLen = AddHtInfoLen; - NdisMoveMemory(&pBss->AddHtInfo, pAddHtInfo, AddHtInfoLen); - - if ((pAddHtInfo->ControlChan > 2)&& (pAddHtInfo->AddHtInfo.ExtChanOffset == EXTCHA_BELOW) && (pHtCapability->HtCapInfo.ChannelWidth == BW_40)) - { - pBss->CentralChannel = pAddHtInfo->ControlChan - 2; - } - else if ((pAddHtInfo->AddHtInfo.ExtChanOffset == EXTCHA_ABOVE) && (pHtCapability->HtCapInfo.ChannelWidth == BW_40)) - { - pBss->CentralChannel = pAddHtInfo->ControlChan + 2; - } - } - } -#endif // DOT11_N_SUPPORT // - - BssCipherParse(pBss); - - // new for QOS - if (pEdcaParm) - NdisMoveMemory(&pBss->EdcaParm, pEdcaParm, sizeof(EDCA_PARM)); - else - pBss->EdcaParm.bValid = FALSE; - if (pQosCapability) - NdisMoveMemory(&pBss->QosCapability, pQosCapability, sizeof(QOS_CAPABILITY_PARM)); - else - pBss->QosCapability.bValid = FALSE; - if (pQbssLoad) - NdisMoveMemory(&pBss->QbssLoad, pQbssLoad, sizeof(QBSS_LOAD_PARM)); - else - pBss->QbssLoad.bValid = FALSE; - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - PEID_STRUCT pEid; - USHORT Length = 0; - - - NdisZeroMemory(&pBss->WpaIE.IE[0], MAX_CUSTOM_LEN); - NdisZeroMemory(&pBss->RsnIE.IE[0], MAX_CUSTOM_LEN); -#ifdef EXT_BUILD_CHANNEL_LIST - NdisZeroMemory(&pBss->CountryString[0], 3); - pBss->bHasCountryIE = FALSE; -#endif // EXT_BUILD_CHANNEL_LIST // - pEid = (PEID_STRUCT) pVIE; - while ((Length + 2 + (USHORT)pEid->Len) <= LengthVIE) - { - switch(pEid->Eid) - { - case IE_WPA: - if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4)) - { - if ((pEid->Len + 2) > MAX_CUSTOM_LEN) - { - pBss->WpaIE.IELen = 0; - break; - } - pBss->WpaIE.IELen = pEid->Len + 2; - NdisMoveMemory(pBss->WpaIE.IE, pEid, pBss->WpaIE.IELen); - } - break; - case IE_RSN: - if (NdisEqualMemory(pEid->Octet + 2, RSN_OUI, 3)) - { - if ((pEid->Len + 2) > MAX_CUSTOM_LEN) - { - pBss->RsnIE.IELen = 0; - break; - } - pBss->RsnIE.IELen = pEid->Len + 2; - NdisMoveMemory(pBss->RsnIE.IE, pEid, pBss->RsnIE.IELen); - } - break; -#ifdef EXT_BUILD_CHANNEL_LIST - case IE_COUNTRY: - NdisMoveMemory(&pBss->CountryString[0], pEid->Octet, 3); - pBss->bHasCountryIE = TRUE; - break; -#endif // EXT_BUILD_CHANNEL_LIST // - } - Length = Length + 2 + (USHORT)pEid->Len; // Eid[1] + Len[1]+ content[Len] - pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len); - } - } -#endif // CONFIG_STA_SUPPORT // -} - -/*! - * \brief insert an entry into the bss table - * \param p_tab The BSS table - * \param Bssid BSSID - * \param ssid SSID - * \param ssid_len Length of SSID - * \param bss_type - * \param beacon_period - * \param timestamp - * \param p_cf - * \param atim_win - * \param cap - * \param rates - * \param rates_len - * \param channel_idx - * \return none - * \pre - * \post - * \note If SSID is identical, the old entry will be replaced by the new one - - IRQL = DISPATCH_LEVEL - - */ -ULONG BssTableSetEntry( - IN PRTMP_ADAPTER pAd, - OUT BSS_TABLE *Tab, - IN PUCHAR pBssid, - IN CHAR Ssid[], - IN UCHAR SsidLen, - IN UCHAR BssType, - IN USHORT BeaconPeriod, - IN CF_PARM *CfParm, - IN USHORT AtimWin, - IN USHORT CapabilityInfo, - IN UCHAR SupRate[], - IN UCHAR SupRateLen, - IN UCHAR ExtRate[], - IN UCHAR ExtRateLen, - IN HT_CAPABILITY_IE *pHtCapability, - IN ADD_HT_INFO_IE *pAddHtInfo, // AP might use this additional ht info IE - IN UCHAR HtCapabilityLen, - IN UCHAR AddHtInfoLen, - IN UCHAR NewExtChanOffset, - IN UCHAR ChannelNo, - IN CHAR Rssi, - IN LARGE_INTEGER TimeStamp, - IN UCHAR CkipFlag, - IN PEDCA_PARM pEdcaParm, - IN PQOS_CAPABILITY_PARM pQosCapability, - IN PQBSS_LOAD_PARM pQbssLoad, - IN USHORT LengthVIE, - IN PNDIS_802_11_VARIABLE_IEs pVIE) -{ - ULONG Idx; - - Idx = BssTableSearchWithSSID(Tab, pBssid, Ssid, SsidLen, ChannelNo); - if (Idx == BSS_NOT_FOUND) - { - if (Tab->BssNr >= MAX_LEN_OF_BSS_TABLE) - { - // - // It may happen when BSS Table was full. - // The desired AP will not be added into BSS Table - // In this case, if we found the desired AP then overwrite BSS Table. - // - if(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) - { - if (MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, pBssid) || - SSID_EQUAL(pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen, Ssid, SsidLen)) - { - Idx = Tab->BssOverlapNr; - BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod, CfParm, AtimWin, - CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen, - NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE); - Tab->BssOverlapNr = (Tab->BssOverlapNr++) % MAX_LEN_OF_BSS_TABLE; - } - return Idx; - } - else - { - return BSS_NOT_FOUND; - } - } - Idx = Tab->BssNr; - BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod, CfParm, AtimWin, - CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen, - NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE); - Tab->BssNr++; - } - else - { - BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod,CfParm, AtimWin, - CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen, - NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE); - } - - return Idx; -} - -#ifdef CONFIG_STA_SUPPORT -#ifdef DOT11_N_SUPPORT -#ifdef DOT11N_DRAFT3 -VOID TriEventInit( - IN PRTMP_ADAPTER pAd) -{ - UCHAR i; - - for (i = 0;i < MAX_TRIGGER_EVENT;i++) - pAd->CommonCfg.TriggerEventTab.EventA[i].bValid = FALSE; - - pAd->CommonCfg.TriggerEventTab.EventANo = 0; - pAd->CommonCfg.TriggerEventTab.EventBCountDown = 0; -} - -ULONG TriEventTableSetEntry( - IN PRTMP_ADAPTER pAd, - OUT TRIGGER_EVENT_TAB *Tab, - IN PUCHAR pBssid, - IN HT_CAPABILITY_IE *pHtCapability, - IN UCHAR HtCapabilityLen, - IN UCHAR RegClass, - IN UCHAR ChannelNo) -{ - // Event A - if (HtCapabilityLen == 0) - { - if (Tab->EventANo < MAX_TRIGGER_EVENT) - { - RTMPMoveMemory(Tab->EventA[Tab->EventANo].BSSID, pBssid, 6); - Tab->EventA[Tab->EventANo].bValid = TRUE; - Tab->EventA[Tab->EventANo].Channel = ChannelNo; - Tab->EventA[Tab->EventANo].CDCounter = pAd->CommonCfg.Dot11BssWidthChanTranDelay; - if (RegClass != 0) - { - // Beacon has Regulatory class IE. So use beacon's - Tab->EventA[Tab->EventANo].RegClass = RegClass; - } - else - { - // Use Station's Regulatory class instead. - if (pAd->StaActive.SupportedHtPhy.bHtEnable == TRUE) - { - if (pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel) - { - Tab->EventA[Tab->EventANo].RegClass = 32; - } - else if (pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel) - Tab->EventA[Tab->EventANo].RegClass = 33; - } - else - Tab->EventA[Tab->EventANo].RegClass = ??; - - } - - Tab->EventANo ++; - } - } - else if (pHtCapability->HtCapInfo.Intolerant40) - { - Tab->EventBCountDown = pAd->CommonCfg.Dot11BssWidthChanTranDelay; - } - -} - -/* - ======================================================================== - Routine Description: - Trigger Event table Maintainence called once every second. - - Arguments: - // IRQL = DISPATCH_LEVEL - ======================================================================== -*/ -VOID TriEventCounterMaintenance( - IN PRTMP_ADAPTER pAd) -{ - UCHAR i; - BOOLEAN bNotify = FALSE; - for (i = 0;i < MAX_TRIGGER_EVENT;i++) - { - if (pAd->CommonCfg.TriggerEventTab.EventA[i].bValid && (pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter > 0)) - { - pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter--; - if (pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter == 0) - { - pAd->CommonCfg.TriggerEventTab.EventA[i].bValid = FALSE; - pAd->CommonCfg.TriggerEventTab.EventANo --; - // Need to send 20/40 Coexistence Notify frame if has status change. - bNotify = TRUE; - } - } - } - if (pAd->CommonCfg.TriggerEventTab.EventBCountDown > 0) - { - pAd->CommonCfg.TriggerEventTab.EventBCountDown--; - if (pAd->CommonCfg.TriggerEventTab.EventBCountDown == 0) - bNotify = TRUE; - } - - if (bNotify == TRUE) - Update2040CoexistFrameAndNotify(pAd, BSSID_WCID, TRUE); -} -#endif // DOT11N_DRAFT3 // -#endif // DOT11_N_SUPPORT // - -// IRQL = DISPATCH_LEVEL -VOID BssTableSsidSort( - IN PRTMP_ADAPTER pAd, - OUT BSS_TABLE *OutTab, - IN CHAR Ssid[], - IN UCHAR SsidLen) -{ - INT i; - BssTableInit(OutTab); - - for (i = 0; i < pAd->ScanTab.BssNr; i++) - { - BSS_ENTRY *pInBss = &pAd->ScanTab.BssEntry[i]; - BOOLEAN bIsHiddenApIncluded = FALSE; - - if (((pAd->CommonCfg.bIEEE80211H == 1) && - (pAd->MlmeAux.Channel > 14) && - RadarChannelCheck(pAd, pInBss->Channel)) -#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier - || (pAd->CommonCfg.CarrierDetect.Enable == TRUE) -#endif // CARRIER_DETECTION_SUPPORT // - ) - { - if (pInBss->Hidden) - bIsHiddenApIncluded = TRUE; - } - - if ((pInBss->BssType == pAd->StaCfg.BssType) && - (SSID_EQUAL(Ssid, SsidLen, pInBss->Ssid, pInBss->SsidLen) || bIsHiddenApIncluded)) - { - BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr]; - - -#ifdef EXT_BUILD_CHANNEL_LIST - // If no Country IE exists no Connection will be established when IEEE80211dClientMode is strict. - if ((pAd->StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict) && - (pInBss->bHasCountryIE == FALSE)) - { - DBGPRINT(RT_DEBUG_TRACE,("StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict, but this AP doesn't have country IE.\n")); - continue; - } -#endif // EXT_BUILD_CHANNEL_LIST // - -#ifdef DOT11_N_SUPPORT - // 2.4G/5G N only mode - if ((pInBss->HtCapabilityLen == 0) && - ((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G))) - { - DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n")); - continue; - } -#endif // DOT11_N_SUPPORT // - - // New for WPA2 - // Check the Authmode first - if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) - { - // Check AuthMode and AuthModeAux for matching, in case AP support dual-mode - if ((pAd->StaCfg.AuthMode != pInBss->AuthMode) && (pAd->StaCfg.AuthMode != pInBss->AuthModeAux)) - // None matched - continue; - - // Check cipher suite, AP must have more secured cipher than station setting - if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)) - { - // If it's not mixed mode, we should only let BSS pass with the same encryption - if (pInBss->WPA.bMixMode == FALSE) - if (pAd->StaCfg.WepStatus != pInBss->WPA.GroupCipher) - continue; - - // check group cipher - if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) && - (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled) && - (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled)) - continue; - - // check pairwise cipher, skip if none matched - // If profile set to AES, let it pass without question. - // If profile set to TKIP, we must find one mateched - if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) && - (pAd->StaCfg.WepStatus != pInBss->WPA.PairCipher) && - (pAd->StaCfg.WepStatus != pInBss->WPA.PairCipherAux)) - continue; - } - else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)) - { - // If it's not mixed mode, we should only let BSS pass with the same encryption - if (pInBss->WPA2.bMixMode == FALSE) - if (pAd->StaCfg.WepStatus != pInBss->WPA2.GroupCipher) - continue; - - // check group cipher - if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) && - (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled) && - (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled)) - continue; - - // check pairwise cipher, skip if none matched - // If profile set to AES, let it pass without question. - // If profile set to TKIP, we must find one mateched - if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) && - (pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipher) && - (pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipherAux)) - continue; - } - } - // Bss Type matched, SSID matched. - // We will check wepstatus for qualification Bss - else if (pAd->StaCfg.WepStatus != pInBss->WepStatus) - { - DBGPRINT(RT_DEBUG_TRACE,("StaCfg.WepStatus=%d, while pInBss->WepStatus=%d\n", pAd->StaCfg.WepStatus, pInBss->WepStatus)); - // - // For the SESv2 case, we will not qualify WepStatus. - // - if (!pInBss->bSES) - continue; - } - - // Since the AP is using hidden SSID, and we are trying to connect to ANY - // It definitely will fail. So, skip it. - // CCX also require not even try to connect it!! - if (SsidLen == 0) - continue; - -#ifdef DOT11_N_SUPPORT - // If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region - // If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead, - if ((pInBss->CentralChannel != pInBss->Channel) && - (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)) - { - if (RTMPCheckChannel(pAd, pInBss->CentralChannel, pInBss->Channel) == FALSE) - { - pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20; - SetCommonHT(pAd); - pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40; - } - else - { - if (pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BAND_WIDTH_20) - { - SetCommonHT(pAd); - } - } - } -#endif // DOT11_N_SUPPORT // - - // copy matching BSS from InTab to OutTab - NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY)); - - OutTab->BssNr++; - } - else if ((pInBss->BssType == pAd->StaCfg.BssType) && (SsidLen == 0)) - { - BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr]; - - -#ifdef DOT11_N_SUPPORT - // 2.4G/5G N only mode - if ((pInBss->HtCapabilityLen == 0) && - ((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G))) - { - DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n")); - continue; - } -#endif // DOT11_N_SUPPORT // - - // New for WPA2 - // Check the Authmode first - if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) - { - // Check AuthMode and AuthModeAux for matching, in case AP support dual-mode - if ((pAd->StaCfg.AuthMode != pInBss->AuthMode) && (pAd->StaCfg.AuthMode != pInBss->AuthModeAux)) - // None matched - continue; - - // Check cipher suite, AP must have more secured cipher than station setting - if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)) - { - // If it's not mixed mode, we should only let BSS pass with the same encryption - if (pInBss->WPA.bMixMode == FALSE) - if (pAd->StaCfg.WepStatus != pInBss->WPA.GroupCipher) - continue; - - // check group cipher - if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) - continue; - - // check pairwise cipher, skip if none matched - // If profile set to AES, let it pass without question. - // If profile set to TKIP, we must find one mateched - if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) && - (pAd->StaCfg.WepStatus != pInBss->WPA.PairCipher) && - (pAd->StaCfg.WepStatus != pInBss->WPA.PairCipherAux)) - continue; - } - else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)) - { - // If it's not mixed mode, we should only let BSS pass with the same encryption - if (pInBss->WPA2.bMixMode == FALSE) - if (pAd->StaCfg.WepStatus != pInBss->WPA2.GroupCipher) - continue; - - // check group cipher - if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher) - continue; - - // check pairwise cipher, skip if none matched - // If profile set to AES, let it pass without question. - // If profile set to TKIP, we must find one mateched - if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) && - (pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipher) && - (pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipherAux)) - continue; - } - } - // Bss Type matched, SSID matched. - // We will check wepstatus for qualification Bss - else if (pAd->StaCfg.WepStatus != pInBss->WepStatus) - continue; - -#ifdef DOT11_N_SUPPORT - // If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region - // If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead, - if ((pInBss->CentralChannel != pInBss->Channel) && - (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)) - { - if (RTMPCheckChannel(pAd, pInBss->CentralChannel, pInBss->Channel) == FALSE) - { - pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20; - SetCommonHT(pAd); - pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40; - } - } -#endif // DOT11_N_SUPPORT // - - // copy matching BSS from InTab to OutTab - NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY)); - - OutTab->BssNr++; - } - - if (OutTab->BssNr >= MAX_LEN_OF_BSS_TABLE) - break; - } - - BssTableSortByRssi(OutTab); -} - - -// IRQL = DISPATCH_LEVEL -VOID BssTableSortByRssi( - IN OUT BSS_TABLE *OutTab) -{ - INT i, j; - BSS_ENTRY TmpBss; - - for (i = 0; i < OutTab->BssNr - 1; i++) - { - for (j = i+1; j < OutTab->BssNr; j++) - { - if (OutTab->BssEntry[j].Rssi > OutTab->BssEntry[i].Rssi) - { - NdisMoveMemory(&TmpBss, &OutTab->BssEntry[j], sizeof(BSS_ENTRY)); - NdisMoveMemory(&OutTab->BssEntry[j], &OutTab->BssEntry[i], sizeof(BSS_ENTRY)); - NdisMoveMemory(&OutTab->BssEntry[i], &TmpBss, sizeof(BSS_ENTRY)); - } - } - } -} -#endif // CONFIG_STA_SUPPORT // - - -VOID BssCipherParse( - IN OUT PBSS_ENTRY pBss) -{ - PEID_STRUCT pEid; - PUCHAR pTmp; - PRSN_IE_HEADER_STRUCT pRsnHeader; - PCIPHER_SUITE_STRUCT pCipher; - PAKM_SUITE_STRUCT pAKM; - USHORT Count; - INT Length; - NDIS_802_11_ENCRYPTION_STATUS TmpCipher; - - // - // WepStatus will be reset later, if AP announce TKIP or AES on the beacon frame. - // - if (pBss->Privacy) - { - pBss->WepStatus = Ndis802_11WEPEnabled; - } - else - { - pBss->WepStatus = Ndis802_11WEPDisabled; - } - // Set default to disable & open authentication before parsing variable IE - pBss->AuthMode = Ndis802_11AuthModeOpen; - pBss->AuthModeAux = Ndis802_11AuthModeOpen; - - // Init WPA setting - pBss->WPA.PairCipher = Ndis802_11WEPDisabled; - pBss->WPA.PairCipherAux = Ndis802_11WEPDisabled; - pBss->WPA.GroupCipher = Ndis802_11WEPDisabled; - pBss->WPA.RsnCapability = 0; - pBss->WPA.bMixMode = FALSE; - - // Init WPA2 setting - pBss->WPA2.PairCipher = Ndis802_11WEPDisabled; - pBss->WPA2.PairCipherAux = Ndis802_11WEPDisabled; - pBss->WPA2.GroupCipher = Ndis802_11WEPDisabled; - pBss->WPA2.RsnCapability = 0; - pBss->WPA2.bMixMode = FALSE; - - - Length = (INT) pBss->VarIELen; - - while (Length > 0) - { - // Parse cipher suite base on WPA1 & WPA2, they should be parsed differently - pTmp = ((PUCHAR) pBss->VarIEs) + pBss->VarIELen - Length; - pEid = (PEID_STRUCT) pTmp; - switch (pEid->Eid) - { - case IE_WPA: - //Parse Cisco IE_WPA (LEAP, CCKM, etc.) - if ( NdisEqualMemory((pTmp+8), CISCO_OUI, 3)) - { - pTmp += 11; - switch (*pTmp) - { - case 1: - case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway - pBss->WepStatus = Ndis802_11Encryption1Enabled; - pBss->WPA.PairCipher = Ndis802_11Encryption1Enabled; - pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled; - break; - case 2: - pBss->WepStatus = Ndis802_11Encryption2Enabled; - pBss->WPA.PairCipher = Ndis802_11Encryption1Enabled; - pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled; - break; - case 4: - pBss->WepStatus = Ndis802_11Encryption3Enabled; - pBss->WPA.PairCipher = Ndis802_11Encryption1Enabled; - pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled; - break; - default: - break; - } - - // if Cisco IE_WPA, break - break; - } - else if (NdisEqualMemory(pEid->Octet, SES_OUI, 3) && (pEid->Len == 7)) - { - pBss->bSES = TRUE; - break; - } - else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4) != 1) - { - // if unsupported vendor specific IE - break; - } - // Skip OUI, version, and multicast suite - // This part should be improved in the future when AP supported multiple cipher suite. - // For now, it's OK since almost all APs have fixed cipher suite supported. - // pTmp = (PUCHAR) pEid->Octet; - pTmp += 11; - - // Cipher Suite Selectors from Spec P802.11i/D3.2 P26. - // Value Meaning - // 0 None - // 1 WEP-40 - // 2 Tkip - // 3 WRAP - // 4 AES - // 5 WEP-104 - // Parse group cipher - switch (*pTmp) - { - case 1: - pBss->WPA.GroupCipher = Ndis802_11GroupWEP40Enabled; - break; - case 5: - pBss->WPA.GroupCipher = Ndis802_11GroupWEP104Enabled; - break; - case 2: - pBss->WPA.GroupCipher = Ndis802_11Encryption2Enabled; - break; - case 4: - pBss->WPA.GroupCipher = Ndis802_11Encryption3Enabled; - break; - default: - break; - } - // number of unicast suite - pTmp += 1; - - // skip all unicast cipher suites - //Count = *(PUSHORT) pTmp; - Count = (pTmp[1]<<8) + pTmp[0]; - pTmp += sizeof(USHORT); - - // Parsing all unicast cipher suite - while (Count > 0) - { - // Skip OUI - pTmp += 3; - TmpCipher = Ndis802_11WEPDisabled; - switch (*pTmp) - { - case 1: - case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway - TmpCipher = Ndis802_11Encryption1Enabled; - break; - case 2: - TmpCipher = Ndis802_11Encryption2Enabled; - break; - case 4: - TmpCipher = Ndis802_11Encryption3Enabled; - break; - default: - break; - } - if (TmpCipher > pBss->WPA.PairCipher) - { - // Move the lower cipher suite to PairCipherAux - pBss->WPA.PairCipherAux = pBss->WPA.PairCipher; - pBss->WPA.PairCipher = TmpCipher; - } - else - { - pBss->WPA.PairCipherAux = TmpCipher; - } - pTmp++; - Count--; - } - - // 4. get AKM suite counts - //Count = *(PUSHORT) pTmp; - Count = (pTmp[1]<<8) + pTmp[0]; - pTmp += sizeof(USHORT); - pTmp += 3; - - switch (*pTmp) - { - case 1: - // Set AP support WPA mode - if (pBss->AuthMode == Ndis802_11AuthModeOpen) - pBss->AuthMode = Ndis802_11AuthModeWPA; - else - pBss->AuthModeAux = Ndis802_11AuthModeWPA; - break; - case 2: - // Set AP support WPA mode - if (pBss->AuthMode == Ndis802_11AuthModeOpen) - pBss->AuthMode = Ndis802_11AuthModeWPAPSK; - else - pBss->AuthModeAux = Ndis802_11AuthModeWPAPSK; - break; - default: - break; - } - pTmp += 1; - - // Fixed for WPA-None - if (pBss->BssType == BSS_ADHOC) - { - pBss->AuthMode = Ndis802_11AuthModeWPANone; - pBss->AuthModeAux = Ndis802_11AuthModeWPANone; - pBss->WepStatus = pBss->WPA.GroupCipher; - // Patched bugs for old driver - if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled) - pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher; - } - else - pBss->WepStatus = pBss->WPA.PairCipher; - - // Check the Pair & Group, if different, turn on mixed mode flag - if (pBss->WPA.GroupCipher != pBss->WPA.PairCipher) - pBss->WPA.bMixMode = TRUE; - - break; - - case IE_RSN: - pRsnHeader = (PRSN_IE_HEADER_STRUCT) pTmp; - - // 0. Version must be 1 - if (le2cpu16(pRsnHeader->Version) != 1) - break; - pTmp += sizeof(RSN_IE_HEADER_STRUCT); - - // 1. Check group cipher - pCipher = (PCIPHER_SUITE_STRUCT) pTmp; - if (!RTMPEqualMemory(pTmp, RSN_OUI, 3)) - break; - - // Parse group cipher - switch (pCipher->Type) - { - case 1: - pBss->WPA2.GroupCipher = Ndis802_11GroupWEP40Enabled; - break; - case 5: - pBss->WPA2.GroupCipher = Ndis802_11GroupWEP104Enabled; - break; - case 2: - pBss->WPA2.GroupCipher = Ndis802_11Encryption2Enabled; - break; - case 4: - pBss->WPA2.GroupCipher = Ndis802_11Encryption3Enabled; - break; - default: - break; - } - // set to correct offset for next parsing - pTmp += sizeof(CIPHER_SUITE_STRUCT); - - // 2. Get pairwise cipher counts - //Count = *(PUSHORT) pTmp; - Count = (pTmp[1]<<8) + pTmp[0]; - pTmp += sizeof(USHORT); - - // 3. Get pairwise cipher - // Parsing all unicast cipher suite - while (Count > 0) - { - // Skip OUI - pCipher = (PCIPHER_SUITE_STRUCT) pTmp; - TmpCipher = Ndis802_11WEPDisabled; - switch (pCipher->Type) - { - case 1: - case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway - TmpCipher = Ndis802_11Encryption1Enabled; - break; - case 2: - TmpCipher = Ndis802_11Encryption2Enabled; - break; - case 4: - TmpCipher = Ndis802_11Encryption3Enabled; - break; - default: - break; - } - if (TmpCipher > pBss->WPA2.PairCipher) - { - // Move the lower cipher suite to PairCipherAux - pBss->WPA2.PairCipherAux = pBss->WPA2.PairCipher; - pBss->WPA2.PairCipher = TmpCipher; - } - else - { - pBss->WPA2.PairCipherAux = TmpCipher; - } - pTmp += sizeof(CIPHER_SUITE_STRUCT); - Count--; - } - - // 4. get AKM suite counts - //Count = *(PUSHORT) pTmp; - Count = (pTmp[1]<<8) + pTmp[0]; - pTmp += sizeof(USHORT); - - // 5. Get AKM ciphers - pAKM = (PAKM_SUITE_STRUCT) pTmp; - if (!RTMPEqualMemory(pTmp, RSN_OUI, 3)) - break; - - switch (pAKM->Type) - { - case 1: - // Set AP support WPA mode - if (pBss->AuthMode == Ndis802_11AuthModeOpen) - pBss->AuthMode = Ndis802_11AuthModeWPA2; - else - pBss->AuthModeAux = Ndis802_11AuthModeWPA2; - break; - case 2: - // Set AP support WPA mode - if (pBss->AuthMode == Ndis802_11AuthModeOpen) - pBss->AuthMode = Ndis802_11AuthModeWPA2PSK; - else - pBss->AuthModeAux = Ndis802_11AuthModeWPA2PSK; - break; - default: - break; - } - pTmp += (Count * sizeof(AKM_SUITE_STRUCT)); - - // Fixed for WPA-None - if (pBss->BssType == BSS_ADHOC) - { - pBss->AuthMode = Ndis802_11AuthModeWPANone; - pBss->AuthModeAux = Ndis802_11AuthModeWPANone; - pBss->WPA.PairCipherAux = pBss->WPA2.PairCipherAux; - pBss->WPA.GroupCipher = pBss->WPA2.GroupCipher; - pBss->WepStatus = pBss->WPA.GroupCipher; - // Patched bugs for old driver - if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled) - pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher; - } - pBss->WepStatus = pBss->WPA2.PairCipher; - - // 6. Get RSN capability - //pBss->WPA2.RsnCapability = *(PUSHORT) pTmp; - pBss->WPA2.RsnCapability = (pTmp[1]<<8) + pTmp[0]; - pTmp += sizeof(USHORT); - - // Check the Pair & Group, if different, turn on mixed mode flag - if (pBss->WPA2.GroupCipher != pBss->WPA2.PairCipher) - pBss->WPA2.bMixMode = TRUE; - - break; - default: - break; - } - Length -= (pEid->Len + 2); - } -} - -// =========================================================================================== -// mac_table.c -// =========================================================================================== - -/*! \brief generates a random mac address value for IBSS BSSID - * \param Addr the bssid location - * \return none - * \pre - * \post - */ -VOID MacAddrRandomBssid( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pAddr) -{ - INT i; - - for (i = 0; i < MAC_ADDR_LEN; i++) - { - pAddr[i] = RandomByte(pAd); - } - - pAddr[0] = (pAddr[0] & 0xfe) | 0x02; // the first 2 bits must be 01xxxxxxxx -} - -/*! \brief init the management mac frame header - * \param p_hdr mac header - * \param subtype subtype of the frame - * \param p_ds destination address, don't care if it is a broadcast address - * \return none - * \pre the station has the following information in the pAd->StaCfg - * - bssid - * - station address - * \post - * \note this function initializes the following field - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - */ -VOID MgtMacHeaderInit( - IN PRTMP_ADAPTER pAd, - IN OUT PHEADER_802_11 pHdr80211, - IN UCHAR SubType, - IN UCHAR ToDs, - IN PUCHAR pDA, - IN PUCHAR pBssid) -{ - NdisZeroMemory(pHdr80211, sizeof(HEADER_802_11)); - - pHdr80211->FC.Type = BTYPE_MGMT; - pHdr80211->FC.SubType = SubType; -// if (SubType == SUBTYPE_ACK) // sample, no use, it will conflict with ACTION frame sub type -// pHdr80211->FC.Type = BTYPE_CNTL; - pHdr80211->FC.ToDs = ToDs; - COPY_MAC_ADDR(pHdr80211->Addr1, pDA); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress); -#endif // CONFIG_STA_SUPPORT // - COPY_MAC_ADDR(pHdr80211->Addr3, pBssid); -} - -// =========================================================================================== -// mem_mgmt.c -// =========================================================================================== - -/*!*************************************************************************** - * This routine build an outgoing frame, and fill all information specified - * in argument list to the frame body. The actual frame size is the summation - * of all arguments. - * input params: - * Buffer - pointer to a pre-allocated memory segment - * args - a list of <int arg_size, arg> pairs. - * NOTE NOTE NOTE!!!! the last argument must be NULL, otherwise this - * function will FAIL!!! - * return: - * Size of the buffer - * usage: - * MakeOutgoingFrame(Buffer, output_length, 2, &fc, 2, &dur, 6, p_addr1, 6,p_addr2, END_OF_ARGS); - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - ****************************************************************************/ -ULONG MakeOutgoingFrame( - OUT CHAR *Buffer, - OUT ULONG *FrameLen, ...) -{ - CHAR *p; - int leng; - ULONG TotLeng; - va_list Args; - - // calculates the total length - TotLeng = 0; - va_start(Args, FrameLen); - do - { - leng = va_arg(Args, int); - if (leng == END_OF_ARGS) - { - break; - } - p = va_arg(Args, PVOID); - NdisMoveMemory(&Buffer[TotLeng], p, leng); - TotLeng = TotLeng + leng; - } while(TRUE); - - va_end(Args); /* clean up */ - *FrameLen = TotLeng; - return TotLeng; -} - -// =========================================================================================== -// mlme_queue.c -// =========================================================================================== - -/*! \brief Initialize The MLME Queue, used by MLME Functions - * \param *Queue The MLME Queue - * \return Always Return NDIS_STATE_SUCCESS in this implementation - * \pre - * \post - * \note Because this is done only once (at the init stage), no need to be locked - - IRQL = PASSIVE_LEVEL - - */ -NDIS_STATUS MlmeQueueInit( - IN MLME_QUEUE *Queue) -{ - INT i; - - NdisAllocateSpinLock(&Queue->Lock); - - Queue->Num = 0; - Queue->Head = 0; - Queue->Tail = 0; - - for (i = 0; i < MAX_LEN_OF_MLME_QUEUE; i++) - { - Queue->Entry[i].Occupied = FALSE; - Queue->Entry[i].MsgLen = 0; - NdisZeroMemory(Queue->Entry[i].Msg, MGMT_DMA_BUFFER_SIZE); - } - - return NDIS_STATUS_SUCCESS; -} - -/*! \brief Enqueue a message for other threads, if they want to send messages to MLME thread - * \param *Queue The MLME Queue - * \param Machine The State Machine Id - * \param MsgType The Message Type - * \param MsgLen The Message length - * \param *Msg The message pointer - * \return TRUE if enqueue is successful, FALSE if the queue is full - * \pre - * \post - * \note The message has to be initialized - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - */ -BOOLEAN MlmeEnqueue( - IN PRTMP_ADAPTER pAd, - IN ULONG Machine, - IN ULONG MsgType, - IN ULONG MsgLen, - IN VOID *Msg) -{ - INT Tail; - MLME_QUEUE *Queue = (MLME_QUEUE *)&pAd->Mlme.Queue; - - // Do nothing if the driver is starting halt state. - // This might happen when timer already been fired before cancel timer with mlmehalt - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) - return FALSE; - - // First check the size, it MUST not exceed the mlme queue size - if (MsgLen > MGMT_DMA_BUFFER_SIZE) - { - DBGPRINT_ERR(("MlmeEnqueue: msg too large, size = %ld \n", MsgLen)); - return FALSE; - } - - if (MlmeQueueFull(Queue)) - { - return FALSE; - } - - NdisAcquireSpinLock(&(Queue->Lock)); - Tail = Queue->Tail; - Queue->Tail++; - Queue->Num++; - if (Queue->Tail == MAX_LEN_OF_MLME_QUEUE) - { - Queue->Tail = 0; - } - - Queue->Entry[Tail].Wcid = RESERVED_WCID; - Queue->Entry[Tail].Occupied = TRUE; - Queue->Entry[Tail].Machine = Machine; - Queue->Entry[Tail].MsgType = MsgType; - Queue->Entry[Tail].MsgLen = MsgLen; - - if (Msg != NULL) - { - NdisMoveMemory(Queue->Entry[Tail].Msg, Msg, MsgLen); - } - - NdisReleaseSpinLock(&(Queue->Lock)); - return TRUE; -} - -/*! \brief This function is used when Recv gets a MLME message - * \param *Queue The MLME Queue - * \param TimeStampHigh The upper 32 bit of timestamp - * \param TimeStampLow The lower 32 bit of timestamp - * \param Rssi The receiving RSSI strength - * \param MsgLen The length of the message - * \param *Msg The message pointer - * \return TRUE if everything ok, FALSE otherwise (like Queue Full) - * \pre - * \post - - IRQL = DISPATCH_LEVEL - - */ -BOOLEAN MlmeEnqueueForRecv( - IN PRTMP_ADAPTER pAd, - IN ULONG Wcid, - IN ULONG TimeStampHigh, - IN ULONG TimeStampLow, - IN UCHAR Rssi0, - IN UCHAR Rssi1, - IN UCHAR Rssi2, - IN ULONG MsgLen, - IN VOID *Msg, - IN UCHAR Signal) -{ - INT Tail, Machine; - PFRAME_802_11 pFrame = (PFRAME_802_11)Msg; - INT MsgType; - MLME_QUEUE *Queue = (MLME_QUEUE *)&pAd->Mlme.Queue; - -#ifdef RALINK_ATE - /* Nothing to do in ATE mode */ - if(ATE_ON(pAd)) - return FALSE; -#endif // RALINK_ATE // - - // Do nothing if the driver is starting halt state. - // This might happen when timer already been fired before cancel timer with mlmehalt - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) - { - DBGPRINT_ERR(("MlmeEnqueueForRecv: fRTMP_ADAPTER_HALT_IN_PROGRESS\n")); - return FALSE; - } - - // First check the size, it MUST not exceed the mlme queue size - if (MsgLen > MGMT_DMA_BUFFER_SIZE) - { - DBGPRINT_ERR(("MlmeEnqueueForRecv: frame too large, size = %ld \n", MsgLen)); - return FALSE; - } - - if (MlmeQueueFull(Queue)) - { - return FALSE; - } - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if (!MsgTypeSubst(pAd, pFrame, &Machine, &MsgType)) - { - DBGPRINT_ERR(("MlmeEnqueueForRecv: un-recongnized mgmt->subtype=%d\n",pFrame->Hdr.FC.SubType)); - return FALSE; - } - } -#endif // CONFIG_STA_SUPPORT // - - // OK, we got all the informations, it is time to put things into queue - NdisAcquireSpinLock(&(Queue->Lock)); - Tail = Queue->Tail; - Queue->Tail++; - Queue->Num++; - if (Queue->Tail == MAX_LEN_OF_MLME_QUEUE) - { - Queue->Tail = 0; - } - Queue->Entry[Tail].Occupied = TRUE; - Queue->Entry[Tail].Machine = Machine; - Queue->Entry[Tail].MsgType = MsgType; - Queue->Entry[Tail].MsgLen = MsgLen; - Queue->Entry[Tail].TimeStamp.u.LowPart = TimeStampLow; - Queue->Entry[Tail].TimeStamp.u.HighPart = TimeStampHigh; - Queue->Entry[Tail].Rssi0 = Rssi0; - Queue->Entry[Tail].Rssi1 = Rssi1; - Queue->Entry[Tail].Rssi2 = Rssi2; - Queue->Entry[Tail].Signal = Signal; - Queue->Entry[Tail].Wcid = (UCHAR)Wcid; - - Queue->Entry[Tail].Channel = pAd->LatchRfRegs.Channel; - - if (Msg != NULL) - { - NdisMoveMemory(Queue->Entry[Tail].Msg, Msg, MsgLen); - } - - NdisReleaseSpinLock(&(Queue->Lock)); - - RT28XX_MLME_HANDLER(pAd); - - return TRUE; -} - - -/*! \brief Dequeue a message from the MLME Queue - * \param *Queue The MLME Queue - * \param *Elem The message dequeued from MLME Queue - * \return TRUE if the Elem contains something, FALSE otherwise - * \pre - * \post - - IRQL = DISPATCH_LEVEL - - */ -BOOLEAN MlmeDequeue( - IN MLME_QUEUE *Queue, - OUT MLME_QUEUE_ELEM **Elem) -{ - NdisAcquireSpinLock(&(Queue->Lock)); - *Elem = &(Queue->Entry[Queue->Head]); - Queue->Num--; - Queue->Head++; - if (Queue->Head == MAX_LEN_OF_MLME_QUEUE) - { - Queue->Head = 0; - } - NdisReleaseSpinLock(&(Queue->Lock)); - return TRUE; -} - -// IRQL = DISPATCH_LEVEL -VOID MlmeRestartStateMachine( - IN PRTMP_ADAPTER pAd) -{ -#ifdef CONFIG_STA_SUPPORT - BOOLEAN Cancelled; -#endif // CONFIG_STA_SUPPORT // - - DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n")); - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { -#ifdef QOS_DLS_SUPPORT - UCHAR i; -#endif // QOS_DLS_SUPPORT // - // Cancel all timer events - // Be careful to cancel new added timer - RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled); - -#ifdef QOS_DLS_SUPPORT - for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++) - { - RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &Cancelled); - } -#endif // QOS_DLS_SUPPORT // - } -#endif // CONFIG_STA_SUPPORT // - - // Change back to original channel in case of doing scan - AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.Channel); - - // Resume MSDU which is turned off durning scan - RTMPResumeMsduTransmission(pAd); - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // Set all state machines back IDLE - pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; - pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE; - pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE; - pAd->Mlme.AuthRspMachine.CurrState = AUTH_RSP_IDLE; - pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE; - pAd->Mlme.ActMachine.CurrState = ACT_IDLE; -#ifdef QOS_DLS_SUPPORT - pAd->Mlme.DlsMachine.CurrState = DLS_IDLE; -#endif // QOS_DLS_SUPPORT // - } -#endif // CONFIG_STA_SUPPORT // - -} - -/*! \brief test if the MLME Queue is empty - * \param *Queue The MLME Queue - * \return TRUE if the Queue is empty, FALSE otherwise - * \pre - * \post - - IRQL = DISPATCH_LEVEL - - */ -BOOLEAN MlmeQueueEmpty( - IN MLME_QUEUE *Queue) -{ - BOOLEAN Ans; - - NdisAcquireSpinLock(&(Queue->Lock)); - Ans = (Queue->Num == 0); - NdisReleaseSpinLock(&(Queue->Lock)); - - return Ans; -} - -/*! \brief test if the MLME Queue is full - * \param *Queue The MLME Queue - * \return TRUE if the Queue is empty, FALSE otherwise - * \pre - * \post - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - */ -BOOLEAN MlmeQueueFull( - IN MLME_QUEUE *Queue) -{ - BOOLEAN Ans; - - NdisAcquireSpinLock(&(Queue->Lock)); - Ans = (Queue->Num == MAX_LEN_OF_MLME_QUEUE || Queue->Entry[Queue->Tail].Occupied); - NdisReleaseSpinLock(&(Queue->Lock)); - - return Ans; -} - -/*! \brief The destructor of MLME Queue - * \param - * \return - * \pre - * \post - * \note Clear Mlme Queue, Set Queue->Num to Zero. - - IRQL = PASSIVE_LEVEL - - */ -VOID MlmeQueueDestroy( - IN MLME_QUEUE *pQueue) -{ - NdisAcquireSpinLock(&(pQueue->Lock)); - pQueue->Num = 0; - pQueue->Head = 0; - pQueue->Tail = 0; - NdisReleaseSpinLock(&(pQueue->Lock)); - NdisFreeSpinLock(&(pQueue->Lock)); -} - -/*! \brief To substitute the message type if the message is coming from external - * \param pFrame The frame received - * \param *Machine The state machine - * \param *MsgType the message type for the state machine - * \return TRUE if the substitution is successful, FALSE otherwise - * \pre - * \post - - IRQL = DISPATCH_LEVEL - - */ -#ifdef CONFIG_STA_SUPPORT -BOOLEAN MsgTypeSubst( - IN PRTMP_ADAPTER pAd, - IN PFRAME_802_11 pFrame, - OUT INT *Machine, - OUT INT *MsgType) -{ - USHORT Seq; - UCHAR EAPType; - PUCHAR pData; - - // Pointer to start of data frames including SNAP header - pData = (PUCHAR) pFrame + LENGTH_802_11; - - // The only data type will pass to this function is EAPOL frame - if (pFrame->Hdr.FC.Type == BTYPE_DATA) - { - if (NdisEqualMemory(SNAP_AIRONET, pData, LENGTH_802_1_H)) - { - // Cisco Aironet SNAP header - *Machine = AIRONET_STATE_MACHINE; - *MsgType = MT2_AIRONET_MSG; - return (TRUE); - } -#ifdef LEAP_SUPPORT - if ( pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP ) //LEAP - { - // LEAP frames - *Machine = LEAP_STATE_MACHINE; - EAPType = *((UCHAR*)pFrame + LENGTH_802_11 + LENGTH_802_1_H + 1); - return (LeapMsgTypeSubst(EAPType, MsgType)); - } - else -#endif // LEAP_SUPPORT // - { - *Machine = WPA_PSK_STATE_MACHINE; - EAPType = *((UCHAR*)pFrame + LENGTH_802_11 + LENGTH_802_1_H + 1); - return(WpaMsgTypeSubst(EAPType, MsgType)); - } - } - - switch (pFrame->Hdr.FC.SubType) - { - case SUBTYPE_ASSOC_REQ: - *Machine = ASSOC_STATE_MACHINE; - *MsgType = MT2_PEER_ASSOC_REQ; - break; - case SUBTYPE_ASSOC_RSP: - *Machine = ASSOC_STATE_MACHINE; - *MsgType = MT2_PEER_ASSOC_RSP; - break; - case SUBTYPE_REASSOC_REQ: - *Machine = ASSOC_STATE_MACHINE; - *MsgType = MT2_PEER_REASSOC_REQ; - break; - case SUBTYPE_REASSOC_RSP: - *Machine = ASSOC_STATE_MACHINE; - *MsgType = MT2_PEER_REASSOC_RSP; - break; - case SUBTYPE_PROBE_REQ: - *Machine = SYNC_STATE_MACHINE; - *MsgType = MT2_PEER_PROBE_REQ; - break; - case SUBTYPE_PROBE_RSP: - *Machine = SYNC_STATE_MACHINE; - *MsgType = MT2_PEER_PROBE_RSP; - break; - case SUBTYPE_BEACON: - *Machine = SYNC_STATE_MACHINE; - *MsgType = MT2_PEER_BEACON; - break; - case SUBTYPE_ATIM: - *Machine = SYNC_STATE_MACHINE; - *MsgType = MT2_PEER_ATIM; - break; - case SUBTYPE_DISASSOC: - *Machine = ASSOC_STATE_MACHINE; - *MsgType = MT2_PEER_DISASSOC_REQ; - break; - case SUBTYPE_AUTH: - // get the sequence number from payload 24 Mac Header + 2 bytes algorithm - NdisMoveMemory(&Seq, &pFrame->Octet[2], sizeof(USHORT)); - if (Seq == 1 || Seq == 3) - { - *Machine = AUTH_RSP_STATE_MACHINE; - *MsgType = MT2_PEER_AUTH_ODD; - } - else if (Seq == 2 || Seq == 4) - { - *Machine = AUTH_STATE_MACHINE; - *MsgType = MT2_PEER_AUTH_EVEN; - } - else - { - return FALSE; - } - break; - case SUBTYPE_DEAUTH: - *Machine = AUTH_RSP_STATE_MACHINE; - *MsgType = MT2_PEER_DEAUTH; - break; - case SUBTYPE_ACTION: - *Machine = ACTION_STATE_MACHINE; - // Sometimes Sta will return with category bytes with MSB = 1, if they receive catogory out of their support - if ((pFrame->Octet[0]&0x7F) > MAX_PEER_CATE_MSG) - { - *MsgType = MT2_ACT_INVALID; - } - else - { - *MsgType = (pFrame->Octet[0]&0x7F); - } - break; - default: - return FALSE; - break; - } - - return TRUE; -} -#endif // CONFIG_STA_SUPPORT // - -// =========================================================================================== -// state_machine.c -// =========================================================================================== - -/*! \brief Initialize the state machine. - * \param *S pointer to the state machine - * \param Trans State machine transition function - * \param StNr number of states - * \param MsgNr number of messages - * \param DefFunc default function, when there is invalid state/message combination - * \param InitState initial state of the state machine - * \param Base StateMachine base, internal use only - * \pre p_sm should be a legal pointer - * \post - - IRQL = PASSIVE_LEVEL - - */ -VOID StateMachineInit( - IN STATE_MACHINE *S, - IN STATE_MACHINE_FUNC Trans[], - IN ULONG StNr, - IN ULONG MsgNr, - IN STATE_MACHINE_FUNC DefFunc, - IN ULONG InitState, - IN ULONG Base) -{ - ULONG i, j; - - // set number of states and messages - S->NrState = StNr; - S->NrMsg = MsgNr; - S->Base = Base; - - S->TransFunc = Trans; - - // init all state transition to default function - for (i = 0; i < StNr; i++) - { - for (j = 0; j < MsgNr; j++) - { - S->TransFunc[i * MsgNr + j] = DefFunc; - } - } - - // set the starting state - S->CurrState = InitState; -} - -/*! \brief This function fills in the function pointer into the cell in the state machine - * \param *S pointer to the state machine - * \param St state - * \param Msg incoming message - * \param f the function to be executed when (state, message) combination occurs at the state machine - * \pre *S should be a legal pointer to the state machine, st, msg, should be all within the range, Base should be set in the initial state - * \post - - IRQL = PASSIVE_LEVEL - - */ -VOID StateMachineSetAction( - IN STATE_MACHINE *S, - IN ULONG St, - IN ULONG Msg, - IN STATE_MACHINE_FUNC Func) -{ - ULONG MsgIdx; - - MsgIdx = Msg - S->Base; - - if (St < S->NrState && MsgIdx < S->NrMsg) - { - // boundary checking before setting the action - S->TransFunc[St * S->NrMsg + MsgIdx] = Func; - } -} - -/*! \brief This function does the state transition - * \param *Adapter the NIC adapter pointer - * \param *S the state machine - * \param *Elem the message to be executed - * \return None - - IRQL = DISPATCH_LEVEL - - */ -VOID StateMachinePerformAction( - IN PRTMP_ADAPTER pAd, - IN STATE_MACHINE *S, - IN MLME_QUEUE_ELEM *Elem) -{ - (*(S->TransFunc[S->CurrState * S->NrMsg + Elem->MsgType - S->Base]))(pAd, Elem); -} - -/* - ========================================================================== - Description: - The drop function, when machine executes this, the message is simply - ignored. This function does nothing, the message is freed in - StateMachinePerformAction() - ========================================================================== - */ -VOID Drop( - IN PRTMP_ADAPTER pAd, - IN MLME_QUEUE_ELEM *Elem) -{ -} - -// =========================================================================================== -// lfsr.c -// =========================================================================================== - -/* - ========================================================================== - Description: - - IRQL = PASSIVE_LEVEL - - ========================================================================== - */ -VOID LfsrInit( - IN PRTMP_ADAPTER pAd, - IN ULONG Seed) -{ - if (Seed == 0) - pAd->Mlme.ShiftReg = 1; - else - pAd->Mlme.ShiftReg = Seed; -} - -/* - ========================================================================== - Description: - ========================================================================== - */ -UCHAR RandomByte( - IN PRTMP_ADAPTER pAd) -{ - ULONG i; - UCHAR R, Result; - - R = 0; - - if (pAd->Mlme.ShiftReg == 0) - NdisGetSystemUpTime((ULONG *)&pAd->Mlme.ShiftReg); - - for (i = 0; i < 8; i++) - { - if (pAd->Mlme.ShiftReg & 0x00000001) - { - pAd->Mlme.ShiftReg = ((pAd->Mlme.ShiftReg ^ LFSR_MASK) >> 1) | 0x80000000; - Result = 1; - } - else - { - pAd->Mlme.ShiftReg = pAd->Mlme.ShiftReg >> 1; - Result = 0; - } - R = (R << 1) | Result; - } - - return R; -} - -VOID AsicUpdateAutoFallBackTable( - IN PRTMP_ADAPTER pAd, - IN PUCHAR pRateTable) -{ - UCHAR i; - HT_FBK_CFG0_STRUC HtCfg0; - HT_FBK_CFG1_STRUC HtCfg1; - LG_FBK_CFG0_STRUC LgCfg0; - LG_FBK_CFG1_STRUC LgCfg1; - PRTMP_TX_RATE_SWITCH pCurrTxRate, pNextTxRate; - - // set to initial value - HtCfg0.word = 0x65432100; - HtCfg1.word = 0xedcba988; - LgCfg0.word = 0xedcba988; - LgCfg1.word = 0x00002100; - - pNextTxRate = (PRTMP_TX_RATE_SWITCH)pRateTable+1; - for (i = 1; i < *((PUCHAR) pRateTable); i++) - { - pCurrTxRate = (PRTMP_TX_RATE_SWITCH)pRateTable+1+i; - switch (pCurrTxRate->Mode) - { - case 0: //CCK - break; - case 1: //OFDM - { - switch(pCurrTxRate->CurrMCS) - { - case 0: - LgCfg0.field.OFDMMCS0FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS; - break; - case 1: - LgCfg0.field.OFDMMCS1FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS; - break; - case 2: - LgCfg0.field.OFDMMCS2FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS; - break; - case 3: - LgCfg0.field.OFDMMCS3FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS; - break; - case 4: - LgCfg0.field.OFDMMCS4FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS; - break; - case 5: - LgCfg0.field.OFDMMCS5FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS; - break; - case 6: - LgCfg0.field.OFDMMCS6FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS; - break; - case 7: - LgCfg0.field.OFDMMCS7FBK = (pNextTxRate->Mode == MODE_OFDM) ? (pNextTxRate->CurrMCS+8): pNextTxRate->CurrMCS; - break; - } - } - break; -#ifdef DOT11_N_SUPPORT - case 2: //HT-MIX - case 3: //HT-GF - { - if ((pNextTxRate->Mode >= MODE_HTMIX) && (pCurrTxRate->CurrMCS != pNextTxRate->CurrMCS)) - { - switch(pCurrTxRate->CurrMCS) - { - case 0: - HtCfg0.field.HTMCS0FBK = pNextTxRate->CurrMCS; - break; - case 1: - HtCfg0.field.HTMCS1FBK = pNextTxRate->CurrMCS; - break; - case 2: - HtCfg0.field.HTMCS2FBK = pNextTxRate->CurrMCS; - break; - case 3: - HtCfg0.field.HTMCS3FBK = pNextTxRate->CurrMCS; - break; - case 4: - HtCfg0.field.HTMCS4FBK = pNextTxRate->CurrMCS; - break; - case 5: - HtCfg0.field.HTMCS5FBK = pNextTxRate->CurrMCS; - break; - case 6: - HtCfg0.field.HTMCS6FBK = pNextTxRate->CurrMCS; - break; - case 7: - HtCfg0.field.HTMCS7FBK = pNextTxRate->CurrMCS; - break; - case 8: - HtCfg1.field.HTMCS8FBK = pNextTxRate->CurrMCS; - break; - case 9: - HtCfg1.field.HTMCS9FBK = pNextTxRate->CurrMCS; - break; - case 10: - HtCfg1.field.HTMCS10FBK = pNextTxRate->CurrMCS; - break; - case 11: - HtCfg1.field.HTMCS11FBK = pNextTxRate->CurrMCS; - break; - case 12: - HtCfg1.field.HTMCS12FBK = pNextTxRate->CurrMCS; - break; - case 13: - HtCfg1.field.HTMCS13FBK = pNextTxRate->CurrMCS; - break; - case 14: - HtCfg1.field.HTMCS14FBK = pNextTxRate->CurrMCS; - break; - case 15: - HtCfg1.field.HTMCS15FBK = pNextTxRate->CurrMCS; - break; - default: - DBGPRINT(RT_DEBUG_ERROR, ("AsicUpdateAutoFallBackTable: not support CurrMCS=%d\n", pCurrTxRate->CurrMCS)); - } - } - } - break; -#endif // DOT11_N_SUPPORT // - } - - pNextTxRate = pCurrTxRate; - } - - RTMP_IO_WRITE32(pAd, HT_FBK_CFG0, HtCfg0.word); - RTMP_IO_WRITE32(pAd, HT_FBK_CFG1, HtCfg1.word); - RTMP_IO_WRITE32(pAd, LG_FBK_CFG0, LgCfg0.word); - RTMP_IO_WRITE32(pAd, LG_FBK_CFG1, LgCfg1.word); -} - -/* - ======================================================================== - - Routine Description: - Set MAC register value according operation mode. - OperationMode AND bNonGFExist are for MM and GF Proteciton. - If MM or GF mask is not set, those passing argument doesn't not take effect. - - Operation mode meaning: - = 0 : Pure HT, no preotection. - = 0x01; there may be non-HT devices in both the control and extension channel, protection is optional in BSS. - = 0x10: No Transmission in 40M is protected. - = 0x11: Transmission in both 40M and 20M shall be protected - if (bNonGFExist) - we should choose not to use GF. But still set correct ASIC registers. - ======================================================================== -*/ -VOID AsicUpdateProtect( - IN PRTMP_ADAPTER pAd, - IN USHORT OperationMode, - IN UCHAR SetMask, - IN BOOLEAN bDisableBGProtect, - IN BOOLEAN bNonGFExist) -{ - PROT_CFG_STRUC ProtCfg, ProtCfg4; - UINT32 Protect[6]; - USHORT offset; - UCHAR i; - UINT32 MacReg = 0; - -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - -#ifdef DOT11_N_SUPPORT - if (!(pAd->CommonCfg.bHTProtect) && (OperationMode != 8)) - { - return; - } - - if (pAd->BATable.numAsOriginator) - { - // - // enable the RTS/CTS to avoid channel collision - // - SetMask = ALLN_SETPROTECT; - OperationMode = 8; - } -#endif // DOT11_N_SUPPORT // - - // Config ASIC RTS threshold register - RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg); - MacReg &= 0xFF0000FF; -#if 0 - MacReg |= (pAd->CommonCfg.RtsThreshold << 8); -#else - // If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096 - if (( -#ifdef DOT11_N_SUPPORT - (pAd->CommonCfg.BACapability.field.AmsduEnable) || -#endif // DOT11_N_SUPPORT // - (pAd->CommonCfg.bAggregationCapable == TRUE)) - && pAd->CommonCfg.RtsThreshold == MAX_RTS_THRESHOLD) - { - MacReg |= (0x1000 << 8); - } - else - { - MacReg |= (pAd->CommonCfg.RtsThreshold << 8); - } -#endif - - RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg); - - // Initial common protection settings - RTMPZeroMemory(Protect, sizeof(Protect)); - ProtCfg4.word = 0; - ProtCfg.word = 0; - ProtCfg.field.TxopAllowGF40 = 1; - ProtCfg.field.TxopAllowGF20 = 1; - ProtCfg.field.TxopAllowMM40 = 1; - ProtCfg.field.TxopAllowMM20 = 1; - ProtCfg.field.TxopAllowOfdm = 1; - ProtCfg.field.TxopAllowCck = 1; - ProtCfg.field.RTSThEn = 1; - ProtCfg.field.ProtectNav = ASIC_SHORTNAV; - - // update PHY mode and rate - if (pAd->CommonCfg.Channel > 14) - ProtCfg.field.ProtectRate = 0x4000; - ProtCfg.field.ProtectRate |= pAd->CommonCfg.RtsRate; - - // Handle legacy(B/G) protection - if (bDisableBGProtect) - { - //ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate; - ProtCfg.field.ProtectCtrl = 0; - Protect[0] = ProtCfg.word; - Protect[1] = ProtCfg.word; - } - else - { - //ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate; - ProtCfg.field.ProtectCtrl = 0; // CCK do not need to be protected - Protect[0] = ProtCfg.word; - ProtCfg.field.ProtectCtrl = ASIC_CTS; // OFDM needs using CCK to protect - Protect[1] = ProtCfg.word; - } - -#ifdef DOT11_N_SUPPORT - // Decide HT frame protection. - if ((SetMask & ALLN_SETPROTECT) != 0) - { - switch(OperationMode) - { - case 0x0: - // NO PROTECT - // 1.All STAs in the BSS are 20/40 MHz HT - // 2. in ai 20/40MHz BSS - // 3. all STAs are 20MHz in a 20MHz BSS - // Pure HT. no protection. - - // MM20_PROT_CFG - // Reserved (31:27) - // PROT_TXOP(25:20) -- 010111 - // PROT_NAV(19:18) -- 01 (Short NAV protection) - // PROT_CTRL(17:16) -- 00 (None) - // PROT_RATE(15:0) -- 0x4004 (OFDM 24M) - Protect[2] = 0x01744004; - - // MM40_PROT_CFG - // Reserved (31:27) - // PROT_TXOP(25:20) -- 111111 - // PROT_NAV(19:18) -- 01 (Short NAV protection) - // PROT_CTRL(17:16) -- 00 (None) - // PROT_RATE(15:0) -- 0x4084 (duplicate OFDM 24M) - Protect[3] = 0x03f44084; - - // CF20_PROT_CFG - // Reserved (31:27) - // PROT_TXOP(25:20) -- 010111 - // PROT_NAV(19:18) -- 01 (Short NAV protection) - // PROT_CTRL(17:16) -- 00 (None) - // PROT_RATE(15:0) -- 0x4004 (OFDM 24M) - Protect[4] = 0x01744004; - - // CF40_PROT_CFG - // Reserved (31:27) - // PROT_TXOP(25:20) -- 111111 - // PROT_NAV(19:18) -- 01 (Short NAV protection) - // PROT_CTRL(17:16) -- 00 (None) - // PROT_RATE(15:0) -- 0x4084 (duplicate OFDM 24M) - Protect[5] = 0x03f44084; - - if (bNonGFExist) - { - // PROT_NAV(19:18) -- 01 (Short NAV protectiion) - // PROT_CTRL(17:16) -- 01 (RTS/CTS) - Protect[4] = 0x01754004; - Protect[5] = 0x03f54084; - } - pAd->CommonCfg.IOTestParm.bRTSLongProtOn = FALSE; - break; - - case 1: - // This is "HT non-member protection mode." - // If there may be non-HT STAs my BSS - ProtCfg.word = 0x01744004; // PROT_CTRL(17:16) : 0 (None) - ProtCfg4.word = 0x03f44084; // duplicaet legacy 24M. BW set 1. - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED)) - { - ProtCfg.word = 0x01740003; //ERP use Protection bit is set, use protection rate at Clause 18.. - ProtCfg4.word = 0x03f40003; // Don't duplicate RTS/CTS in CCK mode. 0x03f40083; - } - //Assign Protection method for 20&40 MHz packets - ProtCfg.field.ProtectCtrl = ASIC_RTS; - ProtCfg.field.ProtectNav = ASIC_SHORTNAV; - ProtCfg4.field.ProtectCtrl = ASIC_RTS; - ProtCfg4.field.ProtectNav = ASIC_SHORTNAV; - Protect[2] = ProtCfg.word; - Protect[3] = ProtCfg4.word; - Protect[4] = ProtCfg.word; - Protect[5] = ProtCfg4.word; - pAd->CommonCfg.IOTestParm.bRTSLongProtOn = TRUE; - break; - - case 2: - // If only HT STAs are in BSS. at least one is 20MHz. Only protect 40MHz packets - ProtCfg.word = 0x01744004; // PROT_CTRL(17:16) : 0 (None) - ProtCfg4.word = 0x03f44084; // duplicaet legacy 24M. BW set 1. - - //Assign Protection method for 40MHz packets - ProtCfg4.field.ProtectCtrl = ASIC_RTS; - ProtCfg4.field.ProtectNav = ASIC_SHORTNAV; - Protect[2] = ProtCfg.word; - Protect[3] = ProtCfg4.word; - if (bNonGFExist) - { - ProtCfg.field.ProtectCtrl = ASIC_RTS; - ProtCfg.field.ProtectNav = ASIC_SHORTNAV; - } - Protect[4] = ProtCfg.word; - Protect[5] = ProtCfg4.word; - - pAd->CommonCfg.IOTestParm.bRTSLongProtOn = FALSE; - break; - - case 3: - // HT mixed mode. PROTECT ALL! - // Assign Rate - ProtCfg.word = 0x01744004; //duplicaet legacy 24M. BW set 1. - ProtCfg4.word = 0x03f44084; - // both 20MHz and 40MHz are protected. Whether use RTS or CTS-to-self depends on the - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED)) - { - ProtCfg.word = 0x01740003; //ERP use Protection bit is set, use protection rate at Clause 18.. - ProtCfg4.word = 0x03f40003; // Don't duplicate RTS/CTS in CCK mode. 0x03f40083 - } - //Assign Protection method for 20&40 MHz packets - ProtCfg.field.ProtectCtrl = ASIC_RTS; - ProtCfg.field.ProtectNav = ASIC_SHORTNAV; - ProtCfg4.field.ProtectCtrl = ASIC_RTS; - ProtCfg4.field.ProtectNav = ASIC_SHORTNAV; - Protect[2] = ProtCfg.word; - Protect[3] = ProtCfg4.word; - Protect[4] = ProtCfg.word; - Protect[5] = ProtCfg4.word; - pAd->CommonCfg.IOTestParm.bRTSLongProtOn = TRUE; - break; - - case 8: - // Special on for Atheros problem n chip. - Protect[2] = 0x01754004; - Protect[3] = 0x03f54084; - Protect[4] = 0x01754004; - Protect[5] = 0x03f54084; - pAd->CommonCfg.IOTestParm.bRTSLongProtOn = TRUE; - break; - } - } -#endif // DOT11_N_SUPPORT // - - offset = CCK_PROT_CFG; - for (i = 0;i < 6;i++) - { - if ((SetMask & (1<< i))) - { - RTMP_IO_WRITE32(pAd, offset + i*4, Protect[i]); - } - } -} - -/* - ========================================================================== - Description: - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicSwitchChannel( - IN PRTMP_ADAPTER pAd, - IN UCHAR Channel, - IN BOOLEAN bScan) -{ - ULONG R2 = 0, R3 = DEFAULT_RF_TX_POWER, R4 = 0; - CHAR TxPwer = 0, TxPwer2 = DEFAULT_RF_TX_POWER; //Bbp94 = BBPR94_DEFAULT, TxPwer2 = DEFAULT_RF_TX_POWER; - UCHAR index; - UINT32 Value = 0; //BbpReg, Value; - RTMP_RF_REGS *RFRegTable; - - // Search Tx power value - for (index = 0; index < pAd->ChannelListNum; index++) - { - if (Channel == pAd->ChannelList[index].Channel) - { - TxPwer = pAd->ChannelList[index].Power; - TxPwer2 = pAd->ChannelList[index].Power2; - break; - } - } - - if (index == MAX_NUM_OF_CHANNELS) - { - DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: Cant find the Channel#%d \n", Channel)); - } - -#ifdef RT2870 - // The RF programming sequence is difference between 3xxx and 2xxx - if (IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020))) - { - /* modify by WY for Read RF Reg. error */ - UCHAR RFValue; - - for (index = 0; index < NUM_OF_3020_CHNL; index++) - { - if (Channel == FreqItems3020[index].Channel) - { - // Programming channel parameters - RT30xxWriteRFRegister(pAd, RF_R02, FreqItems3020[index].N); - RT30xxWriteRFRegister(pAd, RF_R03, FreqItems3020[index].K); - - RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RFValue); - RFValue = (RFValue & 0xFC) | FreqItems3020[index].R; - RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RFValue); - - // Set Tx Power - RT30xxReadRFRegister(pAd, RF_R12, (PUCHAR)&RFValue); - RFValue = (RFValue & 0xE0) | TxPwer; - RT30xxWriteRFRegister(pAd, RF_R12, (UCHAR)RFValue); - - // Set RF offset - RT30xxReadRFRegister(pAd, RF_R23, (PUCHAR)&RFValue); - RFValue = (RFValue & 0x80) | pAd->RfFreqOffset; - RT30xxWriteRFRegister(pAd, RF_R23, (UCHAR)RFValue); - - // Set BW - if (!bScan && (pAd->CommonCfg.BBPCurrentBW == BW_40)) - { - RFValue = pAd->Mlme.CaliBW40RfR24; - //DISABLE_11N_CHECK(pAd); - } - else - { - RFValue = pAd->Mlme.CaliBW20RfR24; - } - RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR)RFValue); - - // Enable RF tuning - RT30xxReadRFRegister(pAd, RF_R07, (PUCHAR)&RFValue); - RFValue = RFValue | 0x1; - RT30xxWriteRFRegister(pAd, RF_R07, (UCHAR)RFValue); - - // latch channel for future usage. - pAd->LatchRfRegs.Channel = Channel; - - break; - } - } - - DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n", - Channel, - pAd->RfIcType, - TxPwer, - TxPwer2, - pAd->Antenna.field.TxPath, - FreqItems3020[index].N, - FreqItems3020[index].K, - FreqItems3020[index].R)); - } - else -#endif // RT2870 // - { - RFRegTable = RF2850RegTable; - - switch (pAd->RfIcType) - { - case RFIC_2820: - case RFIC_2850: - case RFIC_2720: - case RFIC_2750: - - for (index = 0; index < NUM_OF_2850_CHNL; index++) - { - if (Channel == RFRegTable[index].Channel) - { - R2 = RFRegTable[index].R2; - if (pAd->Antenna.field.TxPath == 1) - { - R2 |= 0x4000; // If TXpath is 1, bit 14 = 1; - } - - if (pAd->Antenna.field.RxPath == 2) - { - R2 |= 0x40; // write 1 to off Rxpath. - } - else if (pAd->Antenna.field.RxPath == 1) - { - R2 |= 0x20040; // write 1 to off RxPath - } - - if (Channel > 14) - { - // initialize R3, R4 - R3 = (RFRegTable[index].R3 & 0xffffc1ff); - R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->RfFreqOffset << 15); - - // 5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB - // R3 - if ((TxPwer >= -7) && (TxPwer < 0)) - { - TxPwer = (7+TxPwer); - TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer); - R3 |= (TxPwer << 10); - DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: TxPwer=%d \n", TxPwer)); - } - else - { - TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer); - R3 |= (TxPwer << 10) | (1 << 9); - } - - // R4 - if ((TxPwer2 >= -7) && (TxPwer2 < 0)) - { - TxPwer2 = (7+TxPwer2); - TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2); - R4 |= (TxPwer2 << 7); - DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: TxPwer2=%d \n", TxPwer2)); - } - else - { - TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2); - R4 |= (TxPwer2 << 7) | (1 << 6); - } - } - else - { - R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9); // set TX power0 - R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->RfFreqOffset << 15) | (TxPwer2 <<6);// Set freq Offset & TxPwr1 - } - - // Based on BBP current mode before changing RF channel. - if (!bScan && (pAd->CommonCfg.BBPCurrentBW == BW_40)) - { - R4 |=0x200000; - } - - // Update variables - pAd->LatchRfRegs.Channel = Channel; - pAd->LatchRfRegs.R1 = RFRegTable[index].R1; - pAd->LatchRfRegs.R2 = R2; - pAd->LatchRfRegs.R3 = R3; - pAd->LatchRfRegs.R4 = R4; - - // Set RF value 1's set R3[bit2] = [0] - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1); - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2); - RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04))); - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4); - - RTMPusecDelay(200); - - // Set RF value 2's set R3[bit2] = [1] - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1); - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2); - RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 | 0x04)); - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4); - - RTMPusecDelay(200); - - // Set RF value 3's set R3[bit2] = [0] - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1); - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2); - RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04))); - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4); - - break; - } - } - break; - - default: - break; - } - } - - // Change BBP setting during siwtch from a->g, g->a - if (Channel <= 14) - { - ULONG TxPinCfg = 0x00050F0A;//Gary 2007/08/09 0x050A0A - - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd))); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd))); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd))); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0);//(0x44 - GET_LNA_GAIN(pAd))); // According the Rory's suggestion to solve the middle range issue. - //RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62); - - // Rx High power VGA offset for LNA select - if (pAd->NicConfig2.field.ExternalLNAForG) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x46); - } - else - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x84); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x50); - } - - // 5G band selection PIN, bit1 and bit2 are complement - RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value); - Value &= (~0x6); - Value |= (0x04); - RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value); - - // Turn off unused PA or LNA when only 1T or 1R - if (pAd->Antenna.field.TxPath == 1) - { - TxPinCfg &= 0xFFFFFFF3; - } - if (pAd->Antenna.field.RxPath == 1) - { - TxPinCfg &= 0xFFFFF3FF; - } - - RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg); - } - else - { - ULONG TxPinCfg = 0x00050F05;//Gary 2007/8/9 0x050505 - - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd))); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd))); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd))); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0);//(0x44 - GET_LNA_GAIN(pAd))); // According the Rory's suggestion to solve the middle range issue. - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0xF2); - - // Rx High power VGA offset for LNA select - if (pAd->NicConfig2.field.ExternalLNAForA) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x46); - } - else - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R75, 0x50); - } - - // 5G band selection PIN, bit1 and bit2 are complement - RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value); - Value &= (~0x6); - Value |= (0x02); - RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value); - - // Turn off unused PA or LNA when only 1T or 1R - if (pAd->Antenna.field.TxPath == 1) - { - TxPinCfg &= 0xFFFFFFF3; - } - if (pAd->Antenna.field.RxPath == 1) - { - TxPinCfg &= 0xFFFFF3FF; - } - - RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg); - } - - // R66 should be set according to Channel and use 20MHz when scanning - //RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x2E + GET_LNA_GAIN(pAd))); - if (bScan) - RTMPSetAGCInitValue(pAd, BW_20); - else - RTMPSetAGCInitValue(pAd, pAd->CommonCfg.BBPCurrentBW); - - // - // On 11A, We should delay and wait RF/BBP to be stable - // and the appropriate time should be 1000 micro seconds - // 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL. - // - RTMPusecDelay(1000); - - DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%lu, Pwr1=%lu, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n", - Channel, - pAd->RfIcType, - (R3 & 0x00003e00) >> 9, - (R4 & 0x000007c0) >> 6, - pAd->Antenna.field.TxPath, - pAd->LatchRfRegs.R1, - pAd->LatchRfRegs.R2, - pAd->LatchRfRegs.R3, - pAd->LatchRfRegs.R4)); -} - -/* - ========================================================================== - Description: - This function is required for 2421 only, and should not be used during - site survey. It's only required after NIC decided to stay at a channel - for a longer period. - When this function is called, it's always after AsicSwitchChannel(). - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicLockChannel( - IN PRTMP_ADAPTER pAd, - IN UCHAR Channel) -{ -} - -/* - ========================================================================== - Description: - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicAntennaSelect( - IN PRTMP_ADAPTER pAd, - IN UCHAR Channel) -{ -} - -/* - ======================================================================== - - Routine Description: - Antenna miscellaneous setting. - - Arguments: - pAd Pointer to our adapter - BandState Indicate current Band State. - - Return Value: - None - - IRQL <= DISPATCH_LEVEL - - Note: - 1.) Frame End type control - only valid for G only (RF_2527 & RF_2529) - 0: means DPDT, set BBP R4 bit 5 to 1 - 1: means SPDT, set BBP R4 bit 5 to 0 - - - ======================================================================== -*/ -VOID AsicAntennaSetting( - IN PRTMP_ADAPTER pAd, - IN ABGBAND_STATE BandState) -{ -} - -VOID AsicRfTuningExec( - IN PVOID SystemSpecific1, - IN PVOID FunctionContext, - IN PVOID SystemSpecific2, - IN PVOID SystemSpecific3) -{ -} - -/* - ========================================================================== - Description: - Gives CCK TX rate 2 more dB TX power. - This routine works only in LINK UP in INFRASTRUCTURE mode. - - calculate desired Tx power in RF R3.Tx0~5, should consider - - 0. if current radio is a noisy environment (pAd->DrsCounters.fNoisyEnvironment) - 1. TxPowerPercentage - 2. auto calibration based on TSSI feedback - 3. extra 2 db for CCK - 4. -10 db upon very-short distance (AvgRSSI >= -40db) to AP - - NOTE: Since this routine requires the value of (pAd->DrsCounters.fNoisyEnvironment), - it should be called AFTER MlmeDynamicTxRatSwitching() - ========================================================================== - */ -VOID AsicAdjustTxPower( - IN PRTMP_ADAPTER pAd) -{ - INT i, j; - CHAR DeltaPwr = 0; - BOOLEAN bAutoTxAgc = FALSE; - UCHAR TssiRef, *pTssiMinusBoundary, *pTssiPlusBoundary, TxAgcStep; - UCHAR BbpR1 = 0, BbpR49 = 0, idx; - PCHAR pTxAgcCompensate; - ULONG TxPwr[5]; - CHAR Value; - - if (pAd->CommonCfg.BBPCurrentBW == BW_40) - { - if (pAd->CommonCfg.CentralChannel > 14) - { - TxPwr[0] = pAd->Tx40MPwrCfgABand[0]; - TxPwr[1] = pAd->Tx40MPwrCfgABand[1]; - TxPwr[2] = pAd->Tx40MPwrCfgABand[2]; - TxPwr[3] = pAd->Tx40MPwrCfgABand[3]; - TxPwr[4] = pAd->Tx40MPwrCfgABand[4]; - } - else - { - TxPwr[0] = pAd->Tx40MPwrCfgGBand[0]; - TxPwr[1] = pAd->Tx40MPwrCfgGBand[1]; - TxPwr[2] = pAd->Tx40MPwrCfgGBand[2]; - TxPwr[3] = pAd->Tx40MPwrCfgGBand[3]; - TxPwr[4] = pAd->Tx40MPwrCfgGBand[4]; - } - } - else - { - if (pAd->CommonCfg.Channel > 14) - { - TxPwr[0] = pAd->Tx20MPwrCfgABand[0]; - TxPwr[1] = pAd->Tx20MPwrCfgABand[1]; - TxPwr[2] = pAd->Tx20MPwrCfgABand[2]; - TxPwr[3] = pAd->Tx20MPwrCfgABand[3]; - TxPwr[4] = pAd->Tx20MPwrCfgABand[4]; - } - else - { - TxPwr[0] = pAd->Tx20MPwrCfgGBand[0]; - TxPwr[1] = pAd->Tx20MPwrCfgGBand[1]; - TxPwr[2] = pAd->Tx20MPwrCfgGBand[2]; - TxPwr[3] = pAd->Tx20MPwrCfgGBand[3]; - TxPwr[4] = pAd->Tx20MPwrCfgGBand[4]; - } - } - - // TX power compensation for temperature variation based on TSSI. try every 4 second - if (pAd->Mlme.OneSecPeriodicRound % 4 == 0) - { - if (pAd->CommonCfg.Channel <= 14) - { - /* bg channel */ - bAutoTxAgc = pAd->bAutoTxAgcG; - TssiRef = pAd->TssiRefG; - pTssiMinusBoundary = &pAd->TssiMinusBoundaryG[0]; - pTssiPlusBoundary = &pAd->TssiPlusBoundaryG[0]; - TxAgcStep = pAd->TxAgcStepG; - pTxAgcCompensate = &pAd->TxAgcCompensateG; - } - else - { - /* a channel */ - bAutoTxAgc = pAd->bAutoTxAgcA; - TssiRef = pAd->TssiRefA; - pTssiMinusBoundary = &pAd->TssiMinusBoundaryA[0]; - pTssiPlusBoundary = &pAd->TssiPlusBoundaryA[0]; - TxAgcStep = pAd->TxAgcStepA; - pTxAgcCompensate = &pAd->TxAgcCompensateA; - } - - if (bAutoTxAgc) - { - /* BbpR1 is unsigned char */ - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R49, &BbpR49); - - /* (p) TssiPlusBoundaryG[0] = 0 = (m) TssiMinusBoundaryG[0] */ - /* compensate: +4 +3 +2 +1 0 -1 -2 -3 -4 * steps */ - /* step value is defined in pAd->TxAgcStepG for tx power value */ - - /* [4]+1+[4] p4 p3 p2 p1 o1 m1 m2 m3 m4 */ - /* ex: 0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0 - above value are examined in mass factory production */ - /* [4] [3] [2] [1] [0] [1] [2] [3] [4] */ - - /* plus (+) is 0x00 ~ 0x45, minus (-) is 0xa0 ~ 0xf0 */ - /* if value is between p1 ~ o1 or o1 ~ s1, no need to adjust tx power */ - /* if value is 0xa5, tx power will be -= TxAgcStep*(2-1) */ - - if (BbpR49 > pTssiMinusBoundary[1]) - { - // Reading is larger than the reference value - // check for how large we need to decrease the Tx power - for (idx = 1; idx < 5; idx++) - { - if (BbpR49 <= pTssiMinusBoundary[idx]) // Found the range - break; - } - // The index is the step we should decrease, idx = 0 means there is nothing to compensate -// if (R3 > (ULONG) (TxAgcStep * (idx-1))) - *pTxAgcCompensate = -(TxAgcStep * (idx-1)); -// else -// *pTxAgcCompensate = -((UCHAR)R3); - - DeltaPwr += (*pTxAgcCompensate); - DBGPRINT(RT_DEBUG_TRACE, ("-- Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = -%d\n", - BbpR49, TssiRef, TxAgcStep, idx-1)); - } - else if (BbpR49 < pTssiPlusBoundary[1]) - { - // Reading is smaller than the reference value - // check for how large we need to increase the Tx power - for (idx = 1; idx < 5; idx++) - { - if (BbpR49 >= pTssiPlusBoundary[idx]) // Found the range - break; - } - // The index is the step we should increase, idx = 0 means there is nothing to compensate - *pTxAgcCompensate = TxAgcStep * (idx-1); - DeltaPwr += (*pTxAgcCompensate); - DBGPRINT(RT_DEBUG_TRACE, ("++ Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n", - BbpR49, TssiRef, TxAgcStep, idx-1)); - } - else - { - *pTxAgcCompensate = 0; - DBGPRINT(RT_DEBUG_TRACE, (" Tx Power, BBP R49=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n", - BbpR49, TssiRef, TxAgcStep, 0)); - } - } - } - else - { - if (pAd->CommonCfg.Channel <= 14) - { - bAutoTxAgc = pAd->bAutoTxAgcG; - pTxAgcCompensate = &pAd->TxAgcCompensateG; - } - else - { - bAutoTxAgc = pAd->bAutoTxAgcA; - pTxAgcCompensate = &pAd->TxAgcCompensateA; - } - - if (bAutoTxAgc) - DeltaPwr += (*pTxAgcCompensate); - } - - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpR1); - BbpR1 &= 0xFC; - -#ifdef SINGLE_SKU - // Handle regulatory max tx power constrain - do - { - UCHAR TxPwrInEEPROM = 0xFF, CountryTxPwr = 0xFF, criterion; - UCHAR AdjustMaxTxPwr[40]; - - if (pAd->CommonCfg.Channel > 14) // 5G band - TxPwrInEEPROM = ((pAd->CommonCfg.DefineMaxTxPwr & 0xFF00) >> 8); - else // 2.4G band - TxPwrInEEPROM = (pAd->CommonCfg.DefineMaxTxPwr & 0x00FF); - CountryTxPwr = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel); - - // error handling, range check - if ((TxPwrInEEPROM > 0x50) || (CountryTxPwr > 0x50)) - { - DBGPRINT(RT_DEBUG_ERROR,("AsicAdjustTxPower - Invalid max tx power (=0x%02x), CountryTxPwr=%d\n", TxPwrInEEPROM, CountryTxPwr)); - break; - } - - criterion = *((PUCHAR)TxPwr + 2) & 0xF; // FAE use OFDM 6M as criterion - - DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (criterion=%d, TxPwrInEEPROM=%d, CountryTxPwr=%d)\n", criterion, TxPwrInEEPROM, CountryTxPwr)); - - // Adjust max tx power according to the relationship of tx power in E2PROM - for (i=0; i<5; i++) - { - // CCK will have 4dBm larger than OFDM - // Therefore, we should separate to parse the tx power field - if (i == 0) - { - for (j=0; j<8; j++) - { - Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); - - if (j < 4) - { - // CCK will have 4dBm larger than OFDM - AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion) + 4; - } - else - { - AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion); - } - DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j])); - } - } - else - { - for (j=0; j<8; j++) - { - Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); - - AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion); - DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j])); - } - } - } - - // Adjust tx power according to the relationship - for (i=0; i<5; i++) - { - if (TxPwr[i] != 0xffffffff) - { - for (j=0; j<8; j++) - { - Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); - - // The system tx power is larger than the regulatory, the power should be restrain - if (AdjustMaxTxPwr[i*8+j] > CountryTxPwr) - { - // decrease to zero and don't need to take care BBPR1 - if ((Value - (AdjustMaxTxPwr[i*8+j] - CountryTxPwr)) > 0) - Value -= (AdjustMaxTxPwr[i*8+j] - CountryTxPwr); - else - Value = 0; - - DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j])); - } - else - DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d, no change)\n", i, j, Value, AdjustMaxTxPwr[i*8+j])); - - TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4); - } - } - } - } while (FALSE); -#endif // SINGLE_SKU // - - /* calculate delta power based on the percentage specified from UI */ - // E2PROM setting is calibrated for maximum TX power (i.e. 100%) - // We lower TX power here according to the percentage specified from UI - if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff) // AUTO TX POWER control - ; - else if (pAd->CommonCfg.TxPowerPercentage > 90) // 91 ~ 100% & AUTO, treat as 100% in terms of mW - ; - else if (pAd->CommonCfg.TxPowerPercentage > 60) // 61 ~ 90%, treat as 75% in terms of mW // DeltaPwr -= 1; - { - DeltaPwr -= 1; - } - else if (pAd->CommonCfg.TxPowerPercentage > 30) // 31 ~ 60%, treat as 50% in terms of mW // DeltaPwr -= 3; - { - DeltaPwr -= 3; - } - else if (pAd->CommonCfg.TxPowerPercentage > 15) // 16 ~ 30%, treat as 25% in terms of mW // DeltaPwr -= 6; - { - BbpR1 |= 0x01; - } - else if (pAd->CommonCfg.TxPowerPercentage > 9) // 10 ~ 15%, treat as 12.5% in terms of mW // DeltaPwr -= 9; - { - BbpR1 |= 0x01; - DeltaPwr -= 3; - } - else // 0 ~ 9 %, treat as MIN(~3%) in terms of mW // DeltaPwr -= 12; - { - BbpR1 |= 0x02; - } - - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpR1); - - /* reset different new tx power for different TX rate */ - for(i=0; i<5; i++) - { - if (TxPwr[i] != 0xffffffff) - { - for (j=0; j<8; j++) - { - Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); /* 0 ~ 15 */ - - if ((Value + DeltaPwr) < 0) - { - Value = 0; /* min */ - } - else if ((Value + DeltaPwr) > 0xF) - { - Value = 0xF; /* max */ - } - else - { - Value += DeltaPwr; /* temperature compensation */ - } - - /* fill new value to CSR offset */ - TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4); - } - - /* write tx power value to CSR */ - /* TX_PWR_CFG_0 (8 tx rate) for TX power for OFDM 12M/18M - TX power for OFDM 6M/9M - TX power for CCK5.5M/11M - TX power for CCK1M/2M */ - /* TX_PWR_CFG_1 ~ TX_PWR_CFG_4 */ - RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, TxPwr[i]); - } - } - -} - -#ifdef CONFIG_STA_SUPPORT -/* - ========================================================================== - Description: - put PHY to sleep here, and set next wakeup timer. PHY doesn't not wakeup - automatically. Instead, MCU will issue a TwakeUpInterrupt to host after - the wakeup timer timeout. Driver has to issue a separate command to wake - PHY up. - - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicSleepThenAutoWakeup( - IN PRTMP_ADAPTER pAd, - IN USHORT TbttNumToNextWakeUp) -{ - RT28XX_STA_SLEEP_THEN_AUTO_WAKEUP(pAd, TbttNumToNextWakeUp); -} - -/* - ========================================================================== - Description: - AsicForceWakeup() is used whenever manual wakeup is required - AsicForceSleep() should only be used when not in INFRA BSS. When - in INFRA BSS, we should use AsicSleepThenAutoWakeup() instead. - ========================================================================== - */ -VOID AsicForceSleep( - IN PRTMP_ADAPTER pAd) -{ - -} - -/* - ========================================================================== - Description: - AsicForceWakeup() is used whenever Twakeup timer (set via AsicSleepThenAutoWakeup) - expired. - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - ========================================================================== - */ -VOID AsicForceWakeup( - IN PRTMP_ADAPTER pAd, - IN BOOLEAN bFromTx) -{ - DBGPRINT(RT_DEBUG_TRACE, ("--> AsicForceWakeup \n")); - RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx); -} -#endif // CONFIG_STA_SUPPORT // -/* - ========================================================================== - Description: - Set My BSSID - - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicSetBssid( - IN PRTMP_ADAPTER pAd, - IN PUCHAR pBssid) -{ - ULONG Addr4; - DBGPRINT(RT_DEBUG_TRACE, ("==============> AsicSetBssid %x:%x:%x:%x:%x:%x\n", - pBssid[0],pBssid[1],pBssid[2],pBssid[3], pBssid[4],pBssid[5])); - - Addr4 = (ULONG)(pBssid[0]) | - (ULONG)(pBssid[1] << 8) | - (ULONG)(pBssid[2] << 16) | - (ULONG)(pBssid[3] << 24); - RTMP_IO_WRITE32(pAd, MAC_BSSID_DW0, Addr4); - - Addr4 = 0; - // always one BSSID in STA mode - Addr4 = (ULONG)(pBssid[4]) | (ULONG)(pBssid[5] << 8); - - RTMP_IO_WRITE32(pAd, MAC_BSSID_DW1, Addr4); -} - -VOID AsicSetMcastWC( - IN PRTMP_ADAPTER pAd) -{ - MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[MCAST_WCID]; - USHORT offset; - - pEntry->Sst = SST_ASSOC; - pEntry->Aid = MCAST_WCID; // Softap supports 1 BSSID and use WCID=0 as multicast Wcid index - pEntry->PsMode = PWR_ACTIVE; - pEntry->CurrTxRate = pAd->CommonCfg.MlmeRate; - offset = MAC_WCID_BASE + BSS0Mcast_WCID * HW_WCID_ENTRY_SIZE; -} - -/* - ========================================================================== - Description: - - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicDelWcidTab( - IN PRTMP_ADAPTER pAd, - IN UCHAR Wcid) -{ - ULONG Addr0 = 0x0, Addr1 = 0x0; - ULONG offset; - - DBGPRINT(RT_DEBUG_TRACE, ("AsicDelWcidTab==>Wcid = 0x%x\n",Wcid)); - offset = MAC_WCID_BASE + Wcid * HW_WCID_ENTRY_SIZE; - RTMP_IO_WRITE32(pAd, offset, Addr0); - offset += 4; - RTMP_IO_WRITE32(pAd, offset, Addr1); -} - -/* - ========================================================================== - Description: - - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicEnableRDG( - IN PRTMP_ADAPTER pAd) -{ - TX_LINK_CFG_STRUC TxLinkCfg; - UINT32 Data = 0; - - RTMP_IO_READ32(pAd, TX_LINK_CFG, &TxLinkCfg.word); - TxLinkCfg.field.TxRDGEn = 1; - RTMP_IO_WRITE32(pAd, TX_LINK_CFG, TxLinkCfg.word); - - RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data); - Data &= 0xFFFFFF00; - Data |= 0x80; - RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data); - - //OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED); -} - -/* - ========================================================================== - Description: - - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicDisableRDG( - IN PRTMP_ADAPTER pAd) -{ - TX_LINK_CFG_STRUC TxLinkCfg; - UINT32 Data = 0; - - - RTMP_IO_READ32(pAd, TX_LINK_CFG, &TxLinkCfg.word); - TxLinkCfg.field.TxRDGEn = 0; - RTMP_IO_WRITE32(pAd, TX_LINK_CFG, TxLinkCfg.word); - - RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data); - - Data &= 0xFFFFFF00; - //Data |= 0x20; -#ifndef WIFI_TEST - //if ( pAd->CommonCfg.bEnableTxBurst ) - // Data |= 0x60; // for performance issue not set the TXOP to 0 -#endif - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE) -#ifdef DOT11_N_SUPPORT - && (pAd->MacTab.fAnyStationMIMOPSDynamic == FALSE) -#endif // DOT11_N_SUPPORT // - ) - { - // For CWC test, change txop from 0x30 to 0x20 in TxBurst mode - if (pAd->CommonCfg.bEnableTxBurst) - Data |= 0x20; - } - RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Data); -} - -/* - ========================================================================== - Description: - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicDisableSync( - IN PRTMP_ADAPTER pAd) -{ - BCN_TIME_CFG_STRUC csr; - - DBGPRINT(RT_DEBUG_TRACE, ("--->Disable TSF synchronization\n")); - - // 2003-12-20 disable TSF and TBTT while NIC in power-saving have side effect - // that NIC will never wakes up because TSF stops and no more - // TBTT interrupts - pAd->TbttTickCount = 0; - RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word); - csr.field.bBeaconGen = 0; - csr.field.bTBTTEnable = 0; - csr.field.TsfSyncMode = 0; - csr.field.bTsfTicking = 0; - RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word); - -} - -/* - ========================================================================== - Description: - - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicEnableBssSync( - IN PRTMP_ADAPTER pAd) -{ - BCN_TIME_CFG_STRUC csr; - - DBGPRINT(RT_DEBUG_TRACE, ("--->AsicEnableBssSync(INFRA mode)\n")); - - RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word); -// RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, 0x00000000); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - csr.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU - csr.field.bTsfTicking = 1; - csr.field.TsfSyncMode = 1; // sync TSF in INFRASTRUCTURE mode - csr.field.bBeaconGen = 0; // do NOT generate BEACON - csr.field.bTBTTEnable = 1; - } -#endif // CONFIG_STA_SUPPORT // - RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word); -} - -/* - ========================================================================== - Description: - Note: - BEACON frame in shared memory should be built ok before this routine - can be called. Otherwise, a garbage frame maybe transmitted out every - Beacon period. - - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicEnableIbssSync( - IN PRTMP_ADAPTER pAd) -{ - BCN_TIME_CFG_STRUC csr9; - PUCHAR ptr; - UINT i; - - DBGPRINT(RT_DEBUG_TRACE, ("--->AsicEnableIbssSync(ADHOC mode. MPDUtotalByteCount = %d)\n", pAd->BeaconTxWI.MPDUtotalByteCount)); - - RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr9.word); - csr9.field.bBeaconGen = 0; - csr9.field.bTBTTEnable = 0; - csr9.field.bTsfTicking = 0; - RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word); - - -#ifdef RT2870 - // move BEACON TXD and frame content to on-chip memory - ptr = (PUCHAR)&pAd->BeaconTxWI; - for (i=0; i<TXWI_SIZE; i+=2) // 16-byte TXWI field - { - //UINT32 longptr = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24); - //RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + i, longptr); - RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + i, ptr, 2); - ptr += 2; - } - - // start right after the 16-byte TXWI field - ptr = pAd->BeaconBuf; - for (i=0; i< pAd->BeaconTxWI.MPDUtotalByteCount; i+=2) - { - //UINT32 longptr = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24); - //RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr); - RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, ptr, 2); - ptr +=2; - } -#endif // RT2870 // - - // - // For Wi-Fi faily generated beacons between participating stations. - // Set TBTT phase adaptive adjustment step to 8us (default 16us) - // don't change settings 2006-5- by Jerry - //RTMP_IO_WRITE32(pAd, TBTT_SYNC_CFG, 0x00001010); - - // start sending BEACON - csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU - csr9.field.bTsfTicking = 1; - csr9.field.TsfSyncMode = 2; // sync TSF in IBSS mode - csr9.field.bTBTTEnable = 1; - csr9.field.bBeaconGen = 1; - RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word); -} - -/* - ========================================================================== - Description: - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicSetEdcaParm( - IN PRTMP_ADAPTER pAd, - IN PEDCA_PARM pEdcaParm) -{ - EDCA_AC_CFG_STRUC Ac0Cfg, Ac1Cfg, Ac2Cfg, Ac3Cfg; - AC_TXOP_CSR0_STRUC csr0; - AC_TXOP_CSR1_STRUC csr1; - AIFSN_CSR_STRUC AifsnCsr; - CWMIN_CSR_STRUC CwminCsr; - CWMAX_CSR_STRUC CwmaxCsr; - int i; - - Ac0Cfg.word = 0; - Ac1Cfg.word = 0; - Ac2Cfg.word = 0; - Ac3Cfg.word = 0; - if ((pEdcaParm == NULL) || (pEdcaParm->bValid == FALSE)) - { - DBGPRINT(RT_DEBUG_TRACE,("AsicSetEdcaParm\n")); - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_WMM_INUSED); - for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++) - { - if (pAd->MacTab.Content[i].ValidAsCLI || pAd->MacTab.Content[i].ValidAsApCli) - CLIENT_STATUS_CLEAR_FLAG(&pAd->MacTab.Content[i], fCLIENT_STATUS_WMM_CAPABLE); - } - - //======================================================== - // MAC Register has a copy . - //======================================================== -//#ifndef WIFI_TEST - if( pAd->CommonCfg.bEnableTxBurst ) - { - // For CWC test, change txop from 0x30 to 0x20 in TxBurst mode - Ac0Cfg.field.AcTxop = 0x20; // Suggest by John for TxBurst in HT Mode - } - else - Ac0Cfg.field.AcTxop = 0; // QID_AC_BE -//#else -// Ac0Cfg.field.AcTxop = 0; // QID_AC_BE -//#endif - Ac0Cfg.field.Cwmin = CW_MIN_IN_BITS; - Ac0Cfg.field.Cwmax = CW_MAX_IN_BITS; - Ac0Cfg.field.Aifsn = 2; - RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Ac0Cfg.word); - - Ac1Cfg.field.AcTxop = 0; // QID_AC_BK - Ac1Cfg.field.Cwmin = CW_MIN_IN_BITS; - Ac1Cfg.field.Cwmax = CW_MAX_IN_BITS; - Ac1Cfg.field.Aifsn = 2; - RTMP_IO_WRITE32(pAd, EDCA_AC1_CFG, Ac1Cfg.word); - - if (pAd->CommonCfg.PhyMode == PHY_11B) - { - Ac2Cfg.field.AcTxop = 192; // AC_VI: 192*32us ~= 6ms - Ac3Cfg.field.AcTxop = 96; // AC_VO: 96*32us ~= 3ms - } - else - { - Ac2Cfg.field.AcTxop = 96; // AC_VI: 96*32us ~= 3ms - Ac3Cfg.field.AcTxop = 48; // AC_VO: 48*32us ~= 1.5ms - } - Ac2Cfg.field.Cwmin = CW_MIN_IN_BITS; - Ac2Cfg.field.Cwmax = CW_MAX_IN_BITS; - Ac2Cfg.field.Aifsn = 2; - RTMP_IO_WRITE32(pAd, EDCA_AC2_CFG, Ac2Cfg.word); - Ac3Cfg.field.Cwmin = CW_MIN_IN_BITS; - Ac3Cfg.field.Cwmax = CW_MAX_IN_BITS; - Ac3Cfg.field.Aifsn = 2; - RTMP_IO_WRITE32(pAd, EDCA_AC3_CFG, Ac3Cfg.word); - - //======================================================== - // DMA Register has a copy too. - //======================================================== - csr0.field.Ac0Txop = 0; // QID_AC_BE - csr0.field.Ac1Txop = 0; // QID_AC_BK - RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word); - if (pAd->CommonCfg.PhyMode == PHY_11B) - { - csr1.field.Ac2Txop = 192; // AC_VI: 192*32us ~= 6ms - csr1.field.Ac3Txop = 96; // AC_VO: 96*32us ~= 3ms - } - else - { - csr1.field.Ac2Txop = 96; // AC_VI: 96*32us ~= 3ms - csr1.field.Ac3Txop = 48; // AC_VO: 48*32us ~= 1.5ms - } - RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr1.word); - - CwminCsr.word = 0; - CwminCsr.field.Cwmin0 = CW_MIN_IN_BITS; - CwminCsr.field.Cwmin1 = CW_MIN_IN_BITS; - CwminCsr.field.Cwmin2 = CW_MIN_IN_BITS; - CwminCsr.field.Cwmin3 = CW_MIN_IN_BITS; - RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word); - - CwmaxCsr.word = 0; - CwmaxCsr.field.Cwmax0 = CW_MAX_IN_BITS; - CwmaxCsr.field.Cwmax1 = CW_MAX_IN_BITS; - CwmaxCsr.field.Cwmax2 = CW_MAX_IN_BITS; - CwmaxCsr.field.Cwmax3 = CW_MAX_IN_BITS; - RTMP_IO_WRITE32(pAd, WMM_CWMAX_CFG, CwmaxCsr.word); - - RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, 0x00002222); - - NdisZeroMemory(&pAd->CommonCfg.APEdcaParm, sizeof(EDCA_PARM)); - } - else - { - OPSTATUS_SET_FLAG(pAd, fOP_STATUS_WMM_INUSED); - //======================================================== - // MAC Register has a copy. - //======================================================== - // - // Modify Cwmin/Cwmax/Txop on queue[QID_AC_VI], Recommend by Jerry 2005/07/27 - // To degrade our VIDO Queue's throughput for WiFi WMM S3T07 Issue. - // - //pEdcaParm->Txop[QID_AC_VI] = pEdcaParm->Txop[QID_AC_VI] * 7 / 10; // rt2860c need this - - Ac0Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_BE]; - Ac0Cfg.field.Cwmin= pEdcaParm->Cwmin[QID_AC_BE]; - Ac0Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_BE]; - Ac0Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BE]; //+1; - - Ac1Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_BK]; - Ac1Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_BK]; //+2; - Ac1Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_BK]; - Ac1Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BK]; //+1; - - Ac2Cfg.field.AcTxop = (pEdcaParm->Txop[QID_AC_VI] * 6) / 10; - Ac2Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VI]; - Ac2Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VI]; - Ac2Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VI]; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // Tuning for Wi-Fi WMM S06 - if (pAd->CommonCfg.bWiFiTest && - pEdcaParm->Aifsn[QID_AC_VI] == 10) - Ac2Cfg.field.Aifsn -= 1; - - // Tuning for TGn Wi-Fi 5.2.32 - // STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta - if (STA_TGN_WIFI_ON(pAd) && - pEdcaParm->Aifsn[QID_AC_VI] == 10) - { - Ac0Cfg.field.Aifsn = 3; - Ac2Cfg.field.AcTxop = 5; - } - } -#endif // CONFIG_STA_SUPPORT // - - Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO]; - Ac3Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VO]; - Ac3Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VO]; - Ac3Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VO]; - -//#ifdef WIFI_TEST - if (pAd->CommonCfg.bWiFiTest) - { - if (Ac3Cfg.field.AcTxop == 102) - { - Ac0Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_BE] ? pEdcaParm->Txop[QID_AC_BE] : 10; - Ac0Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BE]-1; /* AIFSN must >= 1 */ - Ac1Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_BK]; - Ac1Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_BK]; - Ac2Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VI]; - } /* End of if */ - } -//#endif // WIFI_TEST // - - RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, Ac0Cfg.word); - RTMP_IO_WRITE32(pAd, EDCA_AC1_CFG, Ac1Cfg.word); - RTMP_IO_WRITE32(pAd, EDCA_AC2_CFG, Ac2Cfg.word); - RTMP_IO_WRITE32(pAd, EDCA_AC3_CFG, Ac3Cfg.word); - - - //======================================================== - // DMA Register has a copy too. - //======================================================== - csr0.field.Ac0Txop = Ac0Cfg.field.AcTxop; - csr0.field.Ac1Txop = Ac1Cfg.field.AcTxop; - RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word); - - csr1.field.Ac2Txop = Ac2Cfg.field.AcTxop; - csr1.field.Ac3Txop = Ac3Cfg.field.AcTxop; - RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr1.word); - - CwminCsr.word = 0; - CwminCsr.field.Cwmin0 = pEdcaParm->Cwmin[QID_AC_BE]; - CwminCsr.field.Cwmin1 = pEdcaParm->Cwmin[QID_AC_BK]; - CwminCsr.field.Cwmin2 = pEdcaParm->Cwmin[QID_AC_VI]; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; //for TGn wifi test -#endif // CONFIG_STA_SUPPORT // - RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word); - - CwmaxCsr.word = 0; - CwmaxCsr.field.Cwmax0 = pEdcaParm->Cwmax[QID_AC_BE]; - CwmaxCsr.field.Cwmax1 = pEdcaParm->Cwmax[QID_AC_BK]; - CwmaxCsr.field.Cwmax2 = pEdcaParm->Cwmax[QID_AC_VI]; - CwmaxCsr.field.Cwmax3 = pEdcaParm->Cwmax[QID_AC_VO]; - RTMP_IO_WRITE32(pAd, WMM_CWMAX_CFG, CwmaxCsr.word); - - AifsnCsr.word = 0; - AifsnCsr.field.Aifsn0 = Ac0Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BE]; - AifsnCsr.field.Aifsn1 = Ac1Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BK]; - AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_VI]; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // Tuning for Wi-Fi WMM S06 - if (pAd->CommonCfg.bWiFiTest && - pEdcaParm->Aifsn[QID_AC_VI] == 10) - AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn - 4; - - // Tuning for TGn Wi-Fi 5.2.32 - // STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta - if (STA_TGN_WIFI_ON(pAd) && - pEdcaParm->Aifsn[QID_AC_VI] == 10) - { - AifsnCsr.field.Aifsn0 = 3; - AifsnCsr.field.Aifsn2 = 7; - } - - if (INFRA_ON(pAd)) - CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_WMM_CAPABLE); - } -#endif // CONFIG_STA_SUPPORT // - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test -#endif // CONFIG_STA_SUPPORT // - RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word); - - NdisMoveMemory(&pAd->CommonCfg.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM)); - if (!ADHOC_ON(pAd)) - { - DBGPRINT(RT_DEBUG_TRACE,("EDCA [#%d]: AIFSN CWmin CWmax TXOP(us) ACM\n", pEdcaParm->EdcaUpdateCount)); - DBGPRINT(RT_DEBUG_TRACE,(" AC_BE %2d %2d %2d %4d %d\n", - pEdcaParm->Aifsn[0], - pEdcaParm->Cwmin[0], - pEdcaParm->Cwmax[0], - pEdcaParm->Txop[0]<<5, - pEdcaParm->bACM[0])); - DBGPRINT(RT_DEBUG_TRACE,(" AC_BK %2d %2d %2d %4d %d\n", - pEdcaParm->Aifsn[1], - pEdcaParm->Cwmin[1], - pEdcaParm->Cwmax[1], - pEdcaParm->Txop[1]<<5, - pEdcaParm->bACM[1])); - DBGPRINT(RT_DEBUG_TRACE,(" AC_VI %2d %2d %2d %4d %d\n", - pEdcaParm->Aifsn[2], - pEdcaParm->Cwmin[2], - pEdcaParm->Cwmax[2], - pEdcaParm->Txop[2]<<5, - pEdcaParm->bACM[2])); - DBGPRINT(RT_DEBUG_TRACE,(" AC_VO %2d %2d %2d %4d %d\n", - pEdcaParm->Aifsn[3], - pEdcaParm->Cwmin[3], - pEdcaParm->Cwmax[3], - pEdcaParm->Txop[3]<<5, - pEdcaParm->bACM[3])); - } - } -} - -/* - ========================================================================== - Description: - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicSetSlotTime( - IN PRTMP_ADAPTER pAd, - IN BOOLEAN bUseShortSlotTime) -{ - ULONG SlotTime; - UINT32 RegValue = 0; - -#ifdef CONFIG_STA_SUPPORT - if (pAd->CommonCfg.Channel > 14) - bUseShortSlotTime = TRUE; -#endif // CONFIG_STA_SUPPORT // - - if (bUseShortSlotTime) - OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED); - else - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED); - - SlotTime = (bUseShortSlotTime)? 9 : 20; - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // force using short SLOT time for FAE to demo performance when TxBurst is ON - if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))) -#ifdef DOT11_N_SUPPORT - || ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE)) -#endif // DOT11_N_SUPPORT // - ) - { - // In this case, we will think it is doing Wi-Fi test - // And we will not set to short slot when bEnableTxBurst is TRUE. - } - else if (pAd->CommonCfg.bEnableTxBurst) - SlotTime = 9; - } -#endif // CONFIG_STA_SUPPORT // - - // - // For some reasons, always set it to short slot time. - // - // ToDo: Should consider capability with 11B - // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if (pAd->StaCfg.BssType == BSS_ADHOC) - SlotTime = 20; - } -#endif // CONFIG_STA_SUPPORT // - - RTMP_IO_READ32(pAd, BKOFF_SLOT_CFG, &RegValue); - RegValue = RegValue & 0xFFFFFF00; - - RegValue |= SlotTime; - - RTMP_IO_WRITE32(pAd, BKOFF_SLOT_CFG, RegValue); -} - -/* - ======================================================================== - Description: - Add Shared key information into ASIC. - Update shared key, TxMic and RxMic to Asic Shared key table - Update its cipherAlg to Asic Shared key Mode. - - Return: - ======================================================================== -*/ -VOID AsicAddSharedKeyEntry( - IN PRTMP_ADAPTER pAd, - IN UCHAR BssIndex, - IN UCHAR KeyIdx, - IN UCHAR CipherAlg, - IN PUCHAR pKey, - IN PUCHAR pTxMic, - IN PUCHAR pRxMic) -{ - ULONG offset; //, csr0; - SHAREDKEY_MODE_STRUC csr1; - - DBGPRINT(RT_DEBUG_TRACE, ("AsicAddSharedKeyEntry BssIndex=%d, KeyIdx=%d\n", BssIndex,KeyIdx)); -//============================================================================================ - - DBGPRINT(RT_DEBUG_TRACE,("AsicAddSharedKeyEntry: %s key #%d\n", CipherName[CipherAlg], BssIndex*4 + KeyIdx)); - DBGPRINT_RAW(RT_DEBUG_TRACE, (" Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", - pKey[0],pKey[1],pKey[2],pKey[3],pKey[4],pKey[5],pKey[6],pKey[7],pKey[8],pKey[9],pKey[10],pKey[11],pKey[12],pKey[13],pKey[14],pKey[15])); - if (pRxMic) - { - DBGPRINT_RAW(RT_DEBUG_TRACE, (" Rx MIC Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", - pRxMic[0],pRxMic[1],pRxMic[2],pRxMic[3],pRxMic[4],pRxMic[5],pRxMic[6],pRxMic[7])); - } - if (pTxMic) - { - DBGPRINT_RAW(RT_DEBUG_TRACE, (" Tx MIC Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", - pTxMic[0],pTxMic[1],pTxMic[2],pTxMic[3],pTxMic[4],pTxMic[5],pTxMic[6],pTxMic[7])); - } -//============================================================================================ - // - // fill key material - key + TX MIC + RX MIC - // - -#ifdef RT2870 -{ - offset = SHARED_KEY_TABLE_BASE + (4*BssIndex + KeyIdx)*HW_KEY_ENTRY_SIZE; - RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_SHARE_KEY); - - offset += MAX_LEN_OF_SHARE_KEY; - if (pTxMic) - { - RTUSBMultiWrite(pAd, offset, pTxMic, 8); - } - - offset += 8; - if (pRxMic) - { - RTUSBMultiWrite(pAd, offset, pRxMic, 8); - } -} -#endif // RT2870 // - - // - // Update cipher algorithm. WSTA always use BSS0 - // - RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE+4*(BssIndex/2), &csr1.word); - DBGPRINT(RT_DEBUG_TRACE,("Read: SHARED_KEY_MODE_BASE at this Bss[%d] KeyIdx[%d]= 0x%x \n", BssIndex,KeyIdx, csr1.word)); - if ((BssIndex%2) == 0) - { - if (KeyIdx == 0) - csr1.field.Bss0Key0CipherAlg = CipherAlg; - else if (KeyIdx == 1) - csr1.field.Bss0Key1CipherAlg = CipherAlg; - else if (KeyIdx == 2) - csr1.field.Bss0Key2CipherAlg = CipherAlg; - else - csr1.field.Bss0Key3CipherAlg = CipherAlg; - } - else - { - if (KeyIdx == 0) - csr1.field.Bss1Key0CipherAlg = CipherAlg; - else if (KeyIdx == 1) - csr1.field.Bss1Key1CipherAlg = CipherAlg; - else if (KeyIdx == 2) - csr1.field.Bss1Key2CipherAlg = CipherAlg; - else - csr1.field.Bss1Key3CipherAlg = CipherAlg; - } - DBGPRINT(RT_DEBUG_TRACE,("Write: SHARED_KEY_MODE_BASE at this Bss[%d] = 0x%x \n", BssIndex, csr1.word)); - RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE+4*(BssIndex/2), csr1.word); - -} - -// IRQL = DISPATCH_LEVEL -VOID AsicRemoveSharedKeyEntry( - IN PRTMP_ADAPTER pAd, - IN UCHAR BssIndex, - IN UCHAR KeyIdx) -{ - //ULONG SecCsr0; - SHAREDKEY_MODE_STRUC csr1; - - DBGPRINT(RT_DEBUG_TRACE,("AsicRemoveSharedKeyEntry: #%d \n", BssIndex*4 + KeyIdx)); - - RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE+4*(BssIndex/2), &csr1.word); - if ((BssIndex%2) == 0) - { - if (KeyIdx == 0) - csr1.field.Bss0Key0CipherAlg = 0; - else if (KeyIdx == 1) - csr1.field.Bss0Key1CipherAlg = 0; - else if (KeyIdx == 2) - csr1.field.Bss0Key2CipherAlg = 0; - else - csr1.field.Bss0Key3CipherAlg = 0; - } - else - { - if (KeyIdx == 0) - csr1.field.Bss1Key0CipherAlg = 0; - else if (KeyIdx == 1) - csr1.field.Bss1Key1CipherAlg = 0; - else if (KeyIdx == 2) - csr1.field.Bss1Key2CipherAlg = 0; - else - csr1.field.Bss1Key3CipherAlg = 0; - } - DBGPRINT(RT_DEBUG_TRACE,("Write: SHARED_KEY_MODE_BASE at this Bss[%d] = 0x%x \n", BssIndex, csr1.word)); - RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE+4*(BssIndex/2), csr1.word); - ASSERT(BssIndex < 4); - ASSERT(KeyIdx < 4); - -} - - -VOID AsicUpdateWCIDAttribute( - IN PRTMP_ADAPTER pAd, - IN USHORT WCID, - IN UCHAR BssIndex, - IN UCHAR CipherAlg, - IN BOOLEAN bUsePairewiseKeyTable) -{ - ULONG WCIDAttri = 0, offset; - - // - // Update WCID attribute. - // Only TxKey could update WCID attribute. - // - offset = MAC_WCID_ATTRIBUTE_BASE + (WCID * HW_WCID_ATTRI_SIZE); - WCIDAttri = (BssIndex << 4) | (CipherAlg << 1) | (bUsePairewiseKeyTable); - RTMP_IO_WRITE32(pAd, offset, WCIDAttri); -} - -VOID AsicUpdateWCIDIVEIV( - IN PRTMP_ADAPTER pAd, - IN USHORT WCID, - IN ULONG uIV, - IN ULONG uEIV) -{ - ULONG offset; - - offset = MAC_IVEIV_TABLE_BASE + (WCID * HW_IVEIV_ENTRY_SIZE); - - RTMP_IO_WRITE32(pAd, offset, uIV); - RTMP_IO_WRITE32(pAd, offset + 4, uEIV); -} - -VOID AsicUpdateRxWCIDTable( - IN PRTMP_ADAPTER pAd, - IN USHORT WCID, - IN PUCHAR pAddr) -{ - ULONG offset; - ULONG Addr; - - offset = MAC_WCID_BASE + (WCID * HW_WCID_ENTRY_SIZE); - Addr = pAddr[0] + (pAddr[1] << 8) +(pAddr[2] << 16) +(pAddr[3] << 24); - RTMP_IO_WRITE32(pAd, offset, Addr); - Addr = pAddr[4] + (pAddr[5] << 8); - RTMP_IO_WRITE32(pAd, offset + 4, Addr); -} - - -/* - ======================================================================== - - Routine Description: - Set Cipher Key, Cipher algorithm, IV/EIV to Asic - - Arguments: - pAd Pointer to our adapter - WCID WCID Entry number. - BssIndex BSSID index, station or none multiple BSSID support - this value should be 0. - KeyIdx This KeyIdx will set to IV's KeyID if bTxKey enabled - pCipherKey Pointer to Cipher Key. - bUsePairewiseKeyTable TRUE means saved the key in SharedKey table, - otherwise PairewiseKey table - bTxKey This is the transmit key if enabled. - - Return Value: - None - - Note: - This routine will set the relative key stuff to Asic including WCID attribute, - Cipher Key, Cipher algorithm and IV/EIV. - - IV/EIV will be update if this CipherKey is the transmission key because - ASIC will base on IV's KeyID value to select Cipher Key. - - If bTxKey sets to FALSE, this is not the TX key, but it could be - RX key - - For AP mode bTxKey must be always set to TRUE. - ======================================================================== -*/ -VOID AsicAddKeyEntry( - IN PRTMP_ADAPTER pAd, - IN USHORT WCID, - IN UCHAR BssIndex, - IN UCHAR KeyIdx, - IN PCIPHER_KEY pCipherKey, - IN BOOLEAN bUsePairewiseKeyTable, - IN BOOLEAN bTxKey) -{ - ULONG offset; -// ULONG WCIDAttri = 0; - UCHAR IV4 = 0; - PUCHAR pKey = pCipherKey->Key; -// ULONG KeyLen = pCipherKey->KeyLen; - PUCHAR pTxMic = pCipherKey->TxMic; - PUCHAR pRxMic = pCipherKey->RxMic; - PUCHAR pTxtsc = pCipherKey->TxTsc; - UCHAR CipherAlg = pCipherKey->CipherAlg; - SHAREDKEY_MODE_STRUC csr1; - -// ASSERT(KeyLen <= MAX_LEN_OF_PEER_KEY); - - DBGPRINT(RT_DEBUG_TRACE, ("==> AsicAddKeyEntry\n")); - // - // 1.) decide key table offset - // - if (bUsePairewiseKeyTable) - offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE); - else - offset = SHARED_KEY_TABLE_BASE + (4 * BssIndex + KeyIdx) * HW_KEY_ENTRY_SIZE; - - // - // 2.) Set Key to Asic - // - //for (i = 0; i < KeyLen; i++) - -#ifdef RT2870 - RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_PEER_KEY); - offset += MAX_LEN_OF_PEER_KEY; - - // - // 3.) Set MIC key if available - // - if (pTxMic) - { - RTUSBMultiWrite(pAd, offset, pTxMic, 8); - } - offset += LEN_TKIP_TXMICK; - - if (pRxMic) - { - RTUSBMultiWrite(pAd, offset, pRxMic, 8); - } -#endif // RT2870 // - - // - // 4.) Modify IV/EIV if needs - // This will force Asic to use this key ID by setting IV. - // - if (bTxKey) - { - -#ifdef RT2870 - UINT32 tmpVal; - - // - // Write IV - // - IV4 = (KeyIdx << 6); - if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC) ||(CipherAlg == CIPHER_AES)) - IV4 |= 0x20; // turn on extension bit means EIV existence - - tmpVal = pTxtsc[1] + (((pTxtsc[1] | 0x20) & 0x7f) << 8) + (pTxtsc[0] << 16) + (IV4 << 24); - RTMP_IO_WRITE32(pAd, offset, tmpVal); - - // - // Write EIV - // - offset += 4; - RTMP_IO_WRITE32(pAd, offset, *(PUINT32)&pCipherKey->TxTsc[2]); -#endif // RT2870 // - AsicUpdateWCIDAttribute(pAd, WCID, BssIndex, CipherAlg, bUsePairewiseKeyTable); - } - - if (!bUsePairewiseKeyTable) - { - // - // Only update the shared key security mode - // - RTMP_IO_READ32(pAd, SHARED_KEY_MODE_BASE + 4 * (BssIndex / 2), &csr1.word); - if ((BssIndex % 2) == 0) - { - if (KeyIdx == 0) - csr1.field.Bss0Key0CipherAlg = CipherAlg; - else if (KeyIdx == 1) - csr1.field.Bss0Key1CipherAlg = CipherAlg; - else if (KeyIdx == 2) - csr1.field.Bss0Key2CipherAlg = CipherAlg; - else - csr1.field.Bss0Key3CipherAlg = CipherAlg; - } - else - { - if (KeyIdx == 0) - csr1.field.Bss1Key0CipherAlg = CipherAlg; - else if (KeyIdx == 1) - csr1.field.Bss1Key1CipherAlg = CipherAlg; - else if (KeyIdx == 2) - csr1.field.Bss1Key2CipherAlg = CipherAlg; - else - csr1.field.Bss1Key3CipherAlg = CipherAlg; - } - RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE + 4 * (BssIndex / 2), csr1.word); - } - - DBGPRINT(RT_DEBUG_TRACE, ("<== AsicAddKeyEntry\n")); -} - - -/* - ======================================================================== - Description: - Add Pair-wise key material into ASIC. - Update pairwise key, TxMic and RxMic to Asic Pair-wise key table - - Return: - ======================================================================== -*/ -VOID AsicAddPairwiseKeyEntry( - IN PRTMP_ADAPTER pAd, - IN PUCHAR pAddr, - IN UCHAR WCID, - IN CIPHER_KEY *pCipherKey) -{ - INT i; - ULONG offset; - PUCHAR pKey = pCipherKey->Key; - PUCHAR pTxMic = pCipherKey->TxMic; - PUCHAR pRxMic = pCipherKey->RxMic; -#ifdef DBG - UCHAR CipherAlg = pCipherKey->CipherAlg; -#endif // DBG // - - // EKEY - offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE); -#ifdef RT2870 - RTUSBMultiWrite(pAd, offset, &pCipherKey->Key[0], MAX_LEN_OF_PEER_KEY); -#endif // RT2870 // - for (i=0; i<MAX_LEN_OF_PEER_KEY; i+=4) - { - UINT32 Value; - RTMP_IO_READ32(pAd, offset + i, &Value); - } - - offset += MAX_LEN_OF_PEER_KEY; - - // MIC KEY - if (pTxMic) - { -#ifdef RT2870 - RTUSBMultiWrite(pAd, offset, &pCipherKey->TxMic[0], 8); -#endif // RT2870 // - } - offset += 8; - if (pRxMic) - { -#ifdef RT2870 - RTUSBMultiWrite(pAd, offset, &pCipherKey->RxMic[0], 8); -#endif // RT2870 // - } - - DBGPRINT(RT_DEBUG_TRACE,("AsicAddPairwiseKeyEntry: WCID #%d Alg=%s\n",WCID, CipherName[CipherAlg])); - DBGPRINT(RT_DEBUG_TRACE,(" Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", - pKey[0],pKey[1],pKey[2],pKey[3],pKey[4],pKey[5],pKey[6],pKey[7],pKey[8],pKey[9],pKey[10],pKey[11],pKey[12],pKey[13],pKey[14],pKey[15])); - if (pRxMic) - { - DBGPRINT(RT_DEBUG_TRACE, (" Rx MIC Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", - pRxMic[0],pRxMic[1],pRxMic[2],pRxMic[3],pRxMic[4],pRxMic[5],pRxMic[6],pRxMic[7])); - } - if (pTxMic) - { - DBGPRINT(RT_DEBUG_TRACE, (" Tx MIC Key = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", - pTxMic[0],pTxMic[1],pTxMic[2],pTxMic[3],pTxMic[4],pTxMic[5],pTxMic[6],pTxMic[7])); - } -} -/* - ======================================================================== - Description: - Remove Pair-wise key material from ASIC. - - Return: - ======================================================================== -*/ -VOID AsicRemovePairwiseKeyEntry( - IN PRTMP_ADAPTER pAd, - IN UCHAR BssIdx, - IN UCHAR Wcid) -{ - ULONG WCIDAttri; - USHORT offset; - - // re-set the entry's WCID attribute as OPEN-NONE. - offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE); - WCIDAttri = (BssIdx<<4) | PAIRWISEKEYTABLE; - RTMP_IO_WRITE32(pAd, offset, WCIDAttri); -} - -BOOLEAN AsicSendCommandToMcu( - IN PRTMP_ADAPTER pAd, - IN UCHAR Command, - IN UCHAR Token, - IN UCHAR Arg0, - IN UCHAR Arg1) -{ - HOST_CMD_CSR_STRUC H2MCmd; - H2M_MAILBOX_STRUC H2MMailbox; - ULONG i = 0; - do - { - RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word); - if (H2MMailbox.field.Owner == 0) - break; - - RTMPusecDelay(2); - } while(i++ < 100); - - if (i >= 100) - { - { - DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command fail\n")); - } - return FALSE; - } - - - H2MMailbox.field.Owner = 1; // pass ownership to MCU - H2MMailbox.field.CmdToken = Token; - H2MMailbox.field.HighByte = Arg1; - H2MMailbox.field.LowByte = Arg0; - RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, H2MMailbox.word); - - H2MCmd.word = 0; - H2MCmd.field.HostCommand = Command; - RTMP_IO_WRITE32(pAd, HOST_CMD_CSR, H2MCmd.word); - - if (Command != 0x80) - { - } - - return TRUE; -} - - -/* - ======================================================================== - - Routine Description: - Verify the support rate for different PHY type - - Arguments: - pAd Pointer to our adapter - - Return Value: - None - - IRQL = PASSIVE_LEVEL - - ======================================================================== -*/ -VOID RTMPCheckRates( - IN PRTMP_ADAPTER pAd, - IN OUT UCHAR SupRate[], - IN OUT UCHAR *SupRateLen) -{ - UCHAR RateIdx, i, j; - UCHAR NewRate[12], NewRateLen; - - NewRateLen = 0; - - if (pAd->CommonCfg.PhyMode == PHY_11B) - RateIdx = 4; - else - RateIdx = 12; - - // Check for support rates exclude basic rate bit - for (i = 0; i < *SupRateLen; i++) - for (j = 0; j < RateIdx; j++) - if ((SupRate[i] & 0x7f) == RateIdTo500Kbps[j]) - NewRate[NewRateLen++] = SupRate[i]; - - *SupRateLen = NewRateLen; - NdisMoveMemory(SupRate, NewRate, NewRateLen); -} - -#ifdef CONFIG_STA_SUPPORT -#ifdef DOT11_N_SUPPORT -BOOLEAN RTMPCheckChannel( - IN PRTMP_ADAPTER pAd, - IN UCHAR CentralChannel, - IN UCHAR Channel) -{ - UCHAR k; - UCHAR UpperChannel = 0, LowerChannel = 0; - UCHAR NoEffectChannelinList = 0; - - // Find upper and lower channel according to 40MHz current operation. - if (CentralChannel < Channel) - { - UpperChannel = Channel; - if (CentralChannel > 2) - LowerChannel = CentralChannel - 2; - else - return FALSE; - } - else if (CentralChannel > Channel) - { - UpperChannel = CentralChannel + 2; - LowerChannel = Channel; - } - - for (k = 0;k < pAd->ChannelListNum;k++) - { - if (pAd->ChannelList[k].Channel == UpperChannel) - { - NoEffectChannelinList ++; - } - if (pAd->ChannelList[k].Channel == LowerChannel) - { - NoEffectChannelinList ++; - } - } - - DBGPRINT(RT_DEBUG_TRACE,("Total Channel in Channel List = [%d]\n", NoEffectChannelinList)); - if (NoEffectChannelinList == 2) - return TRUE; - else - return FALSE; -} - -/* - ======================================================================== - - Routine Description: - Verify the support rate for HT phy type - - Arguments: - pAd Pointer to our adapter - - Return Value: - FALSE if pAd->CommonCfg.SupportedHtPhy doesn't accept the pHtCapability. (AP Mode) - - IRQL = PASSIVE_LEVEL - - ======================================================================== -*/ -BOOLEAN RTMPCheckHt( - IN PRTMP_ADAPTER pAd, - IN UCHAR Wcid, - IN HT_CAPABILITY_IE *pHtCapability, - IN ADD_HT_INFO_IE *pAddHtInfo) -{ - if (Wcid >= MAX_LEN_OF_MAC_TABLE) - return FALSE; - - // If use AMSDU, set flag. - if (pAd->CommonCfg.DesiredHtPhy.AmsduEnable) - CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_AMSDU_INUSED); - // Save Peer Capability - if (pHtCapability->HtCapInfo.ShortGIfor20) - CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_SGI20_CAPABLE); - if (pHtCapability->HtCapInfo.ShortGIfor40) - CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_SGI40_CAPABLE); - if (pHtCapability->HtCapInfo.TxSTBC) - CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_TxSTBC_CAPABLE); - if (pHtCapability->HtCapInfo.RxSTBC) - CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_RxSTBC_CAPABLE); - if (pAd->CommonCfg.bRdg && pHtCapability->ExtHtCapInfo.RDGSupport) - { - CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_RDG_CAPABLE); - } - - if (Wcid < MAX_LEN_OF_MAC_TABLE) - { - pAd->MacTab.Content[Wcid].MpduDensity = pHtCapability->HtCapParm.MpduDensity; - } - - // Will check ChannelWidth for MCSSet[4] below - pAd->MlmeAux.HtCapability.MCSSet[4] = 0x1; - switch (pAd->CommonCfg.RxStream) - { - case 1: - pAd->MlmeAux.HtCapability.MCSSet[0] = 0xff; - pAd->MlmeAux.HtCapability.MCSSet[1] = 0x00; - pAd->MlmeAux.HtCapability.MCSSet[2] = 0x00; - pAd->MlmeAux.HtCapability.MCSSet[3] = 0x00; - break; - case 2: - pAd->MlmeAux.HtCapability.MCSSet[0] = 0xff; - pAd->MlmeAux.HtCapability.MCSSet[1] = 0xff; - pAd->MlmeAux.HtCapability.MCSSet[2] = 0x00; - pAd->MlmeAux.HtCapability.MCSSet[3] = 0x00; - break; - case 3: - pAd->MlmeAux.HtCapability.MCSSet[0] = 0xff; - pAd->MlmeAux.HtCapability.MCSSet[1] = 0xff; - pAd->MlmeAux.HtCapability.MCSSet[2] = 0xff; - pAd->MlmeAux.HtCapability.MCSSet[3] = 0x00; - break; - } - - pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth = pAddHtInfo->AddHtInfo.RecomWidth & pAd->CommonCfg.DesiredHtPhy.ChannelWidth; - - DBGPRINT(RT_DEBUG_TRACE, ("RTMPCheckHt:: HtCapInfo.ChannelWidth=%d, RecomWidth=%d, DesiredHtPhy.ChannelWidth=%d, BW40MAvailForA/G=%d/%d, PhyMode=%d \n", - pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth, pAddHtInfo->AddHtInfo.RecomWidth, pAd->CommonCfg.DesiredHtPhy.ChannelWidth, - pAd->NicConfig2.field.BW40MAvailForA, pAd->NicConfig2.field.BW40MAvailForG, pAd->CommonCfg.PhyMode)); - - pAd->MlmeAux.HtCapability.HtCapInfo.GF = pHtCapability->HtCapInfo.GF &pAd->CommonCfg.DesiredHtPhy.GF; - - // Send Assoc Req with my HT capability. - pAd->MlmeAux.HtCapability.HtCapInfo.AMsduSize = pAd->CommonCfg.DesiredHtPhy.AmsduSize; - pAd->MlmeAux.HtCapability.HtCapInfo.MimoPs = pAd->CommonCfg.DesiredHtPhy.MimoPs; - pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor20 = (pAd->CommonCfg.DesiredHtPhy.ShortGIfor20) & (pHtCapability->HtCapInfo.ShortGIfor20); - pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor40 = (pAd->CommonCfg.DesiredHtPhy.ShortGIfor40) & (pHtCapability->HtCapInfo.ShortGIfor40); - pAd->MlmeAux.HtCapability.HtCapInfo.TxSTBC = (pAd->CommonCfg.DesiredHtPhy.TxSTBC)&(pHtCapability->HtCapInfo.RxSTBC); - pAd->MlmeAux.HtCapability.HtCapInfo.RxSTBC = (pAd->CommonCfg.DesiredHtPhy.RxSTBC)&(pHtCapability->HtCapInfo.TxSTBC); - pAd->MlmeAux.HtCapability.HtCapParm.MaxRAmpduFactor = pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor; - pAd->MlmeAux.HtCapability.HtCapParm.MpduDensity = pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity; - pAd->MlmeAux.HtCapability.ExtHtCapInfo.PlusHTC = pHtCapability->ExtHtCapInfo.PlusHTC; - pAd->MacTab.Content[Wcid].HTCapability.ExtHtCapInfo.PlusHTC = pHtCapability->ExtHtCapInfo.PlusHTC; - if (pAd->CommonCfg.bRdg) - { - pAd->MlmeAux.HtCapability.ExtHtCapInfo.RDGSupport = pHtCapability->ExtHtCapInfo.RDGSupport; - pAd->MlmeAux.HtCapability.ExtHtCapInfo.PlusHTC = 1; - } - - if (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_20) - pAd->MlmeAux.HtCapability.MCSSet[4] = 0x0; // BW20 can't transmit MCS32 - - COPY_AP_HTSETTINGS_FROM_BEACON(pAd, pHtCapability); - return TRUE; -} -#endif // DOT11_N_SUPPORT // -#endif // CONFIG_STA_SUPPORT // - -/* - ======================================================================== - - Routine Description: - Verify the support rate for different PHY type - - Arguments: - pAd Pointer to our adapter - - Return Value: - None - - IRQL = PASSIVE_LEVEL - - ======================================================================== -*/ -VOID RTMPUpdateMlmeRate( - IN PRTMP_ADAPTER pAd) -{ - UCHAR MinimumRate; - UCHAR ProperMlmeRate; //= RATE_54; - UCHAR i, j, RateIdx = 12; //1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 - BOOLEAN bMatch = FALSE; - - switch (pAd->CommonCfg.PhyMode) - { - case PHY_11B: - ProperMlmeRate = RATE_11; - MinimumRate = RATE_1; - break; - case PHY_11BG_MIXED: -#ifdef DOT11_N_SUPPORT - case PHY_11ABGN_MIXED: - case PHY_11BGN_MIXED: -#endif // DOT11_N_SUPPORT // - if ((pAd->MlmeAux.SupRateLen == 4) && - (pAd->MlmeAux.ExtRateLen == 0)) - // B only AP - ProperMlmeRate = RATE_11; - else - ProperMlmeRate = RATE_24; - - if (pAd->MlmeAux.Channel <= 14) - MinimumRate = RATE_1; - else - MinimumRate = RATE_6; - break; - case PHY_11A: -#ifdef DOT11_N_SUPPORT - case PHY_11N_2_4G: // rt2860 need to check mlmerate for 802.11n - case PHY_11GN_MIXED: - case PHY_11AGN_MIXED: - case PHY_11AN_MIXED: - case PHY_11N_5G: -#endif // DOT11_N_SUPPORT // - ProperMlmeRate = RATE_24; - MinimumRate = RATE_6; - break; - case PHY_11ABG_MIXED: - ProperMlmeRate = RATE_24; - if (pAd->MlmeAux.Channel <= 14) - MinimumRate = RATE_1; - else - MinimumRate = RATE_6; - break; - default: // error - ProperMlmeRate = RATE_1; - MinimumRate = RATE_1; - break; - } - - for (i = 0; i < pAd->MlmeAux.SupRateLen; i++) - { - for (j = 0; j < RateIdx; j++) - { - if ((pAd->MlmeAux.SupRate[i] & 0x7f) == RateIdTo500Kbps[j]) - { - if (j == ProperMlmeRate) - { - bMatch = TRUE; - break; - } - } - } - - if (bMatch) - break; - } - - if (bMatch == FALSE) - { - for (i = 0; i < pAd->MlmeAux.ExtRateLen; i++) - { - for (j = 0; j < RateIdx; j++) - { - if ((pAd->MlmeAux.ExtRate[i] & 0x7f) == RateIdTo500Kbps[j]) - { - if (j == ProperMlmeRate) - { - bMatch = TRUE; - break; - } - } - } - - if (bMatch) - break; - } - } - - if (bMatch == FALSE) - { - ProperMlmeRate = MinimumRate; - } - - pAd->CommonCfg.MlmeRate = MinimumRate; - pAd->CommonCfg.RtsRate = ProperMlmeRate; - if (pAd->CommonCfg.MlmeRate >= RATE_6) - { - pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM; - pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate]; - pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MODE = MODE_OFDM; - pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate]; - } - else - { - pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK; - pAd->CommonCfg.MlmeTransmit.field.MCS = pAd->CommonCfg.MlmeRate; - pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MODE = MODE_CCK; - pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MCS = pAd->CommonCfg.MlmeRate; - } - - DBGPRINT(RT_DEBUG_TRACE, ("RTMPUpdateMlmeRate ==> MlmeTransmit = 0x%x \n" , pAd->CommonCfg.MlmeTransmit.word)); -} - -CHAR RTMPMaxRssi( - IN PRTMP_ADAPTER pAd, - IN CHAR Rssi0, - IN CHAR Rssi1, - IN CHAR Rssi2) -{ - CHAR larger = -127; - - if ((pAd->Antenna.field.RxPath == 1) && (Rssi0 != 0)) - { - larger = Rssi0; - } - - if ((pAd->Antenna.field.RxPath >= 2) && (Rssi1 != 0)) - { - larger = max(Rssi0, Rssi1); - } - - if ((pAd->Antenna.field.RxPath == 3) && (Rssi2 != 0)) - { - larger = max(larger, Rssi2); - } - - if (larger == -127) - larger = 0; - - return larger; -} - -/* - ======================================================================== - Routine Description: - Periodic evaluate antenna link status - - Arguments: - pAd - Adapter pointer - - Return Value: - None - - ======================================================================== -*/ -VOID AsicEvaluateRxAnt( - IN PRTMP_ADAPTER pAd) -{ - UCHAR BBPR3 = 0; - -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS | - fRTMP_ADAPTER_HALT_IN_PROGRESS | - fRTMP_ADAPTER_RADIO_OFF | - fRTMP_ADAPTER_NIC_NOT_EXIST | - fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) - return; - - if (pAd->StaCfg.Psm == PWR_SAVE) - return; - } -#endif // CONFIG_STA_SUPPORT // - - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3); - BBPR3 &= (~0x18); - if(pAd->Antenna.field.RxPath == 3) - { - BBPR3 |= (0x10); - } - else if(pAd->Antenna.field.RxPath == 2) - { - BBPR3 |= (0x8); - } - else if(pAd->Antenna.field.RxPath == 1) - { - BBPR3 |= (0x0); - } - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); -#ifdef CONFIG_STA_SUPPORT -#endif // CONFIG_STA_SUPPORT // - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) - ) - { - ULONG TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount + - pAd->RalinkCounters.OneSecTxRetryOkCount + - pAd->RalinkCounters.OneSecTxFailCount; - - if (TxTotalCnt > 50) - { - RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 20); - pAd->Mlme.bLowThroughput = FALSE; - } - else - { - RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300); - pAd->Mlme.bLowThroughput = TRUE; - } - } -} - -/* - ======================================================================== - Routine Description: - After evaluation, check antenna link status - - Arguments: - pAd - Adapter pointer - - Return Value: - None - - ======================================================================== -*/ -VOID AsicRxAntEvalTimeout( - IN PVOID SystemSpecific1, - IN PVOID FunctionContext, - IN PVOID SystemSpecific2, - IN PVOID SystemSpecific3) -{ - RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext; -#ifdef CONFIG_STA_SUPPORT - UCHAR BBPR3 = 0; - CHAR larger = -127, rssi0, rssi1, rssi2; -#endif // CONFIG_STA_SUPPORT // - -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) || - RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS) || - RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF) || - RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) - return; - - if (pAd->StaCfg.Psm == PWR_SAVE) - return; - - - // if the traffic is low, use average rssi as the criteria - if (pAd->Mlme.bLowThroughput == TRUE) - { - rssi0 = pAd->StaCfg.RssiSample.LastRssi0; - rssi1 = pAd->StaCfg.RssiSample.LastRssi1; - rssi2 = pAd->StaCfg.RssiSample.LastRssi2; - } - else - { - rssi0 = pAd->StaCfg.RssiSample.AvgRssi0; - rssi1 = pAd->StaCfg.RssiSample.AvgRssi1; - rssi2 = pAd->StaCfg.RssiSample.AvgRssi2; - } - - if(pAd->Antenna.field.RxPath == 3) - { - larger = max(rssi0, rssi1); - - if (larger > (rssi2 + 20)) - pAd->Mlme.RealRxPath = 2; - else - pAd->Mlme.RealRxPath = 3; - } - else if(pAd->Antenna.field.RxPath == 2) - { - if (rssi0 > (rssi1 + 20)) - pAd->Mlme.RealRxPath = 1; - else - pAd->Mlme.RealRxPath = 2; - } - - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3); - BBPR3 &= (~0x18); - if(pAd->Mlme.RealRxPath == 3) - { - BBPR3 |= (0x10); - } - else if(pAd->Mlme.RealRxPath == 2) - { - BBPR3 |= (0x8); - } - else if(pAd->Mlme.RealRxPath == 1) - { - BBPR3 |= (0x0); - } - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); - } - -#endif // CONFIG_STA_SUPPORT // - -} - - - -VOID APSDPeriodicExec( - IN PVOID SystemSpecific1, - IN PVOID FunctionContext, - IN PVOID SystemSpecific2, - IN PVOID SystemSpecific3) -{ - RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext; - - if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) - return; - - pAd->CommonCfg.TriggerTimerCount++; - -// Driver should not send trigger frame, it should be send by application layer -/* - if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable - && (pAd->CommonCfg.bNeedSendTriggerFrame || - (((pAd->CommonCfg.TriggerTimerCount%20) == 19) && (!pAd->CommonCfg.bAPSDAC_BE || !pAd->CommonCfg.bAPSDAC_BK || !pAd->CommonCfg.bAPSDAC_VI || !pAd->CommonCfg.bAPSDAC_VO)))) - { - DBGPRINT(RT_DEBUG_TRACE,("Sending trigger frame and enter service period when support APSD\n")); - RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE); - pAd->CommonCfg.bNeedSendTriggerFrame = FALSE; - pAd->CommonCfg.TriggerTimerCount = 0; - pAd->CommonCfg.bInServicePeriod = TRUE; - }*/ -} - -/* - ======================================================================== - Routine Description: - Set/reset MAC registers according to bPiggyBack parameter - - Arguments: - pAd - Adapter pointer - bPiggyBack - Enable / Disable Piggy-Back - - Return Value: - None - - ======================================================================== -*/ -VOID RTMPSetPiggyBack( - IN PRTMP_ADAPTER pAd, - IN BOOLEAN bPiggyBack) -{ - TX_LINK_CFG_STRUC TxLinkCfg; - - RTMP_IO_READ32(pAd, TX_LINK_CFG, &TxLinkCfg.word); - - TxLinkCfg.field.TxCFAckEn = bPiggyBack; - RTMP_IO_WRITE32(pAd, TX_LINK_CFG, TxLinkCfg.word); -} - -/* - ======================================================================== - Routine Description: - check if this entry need to switch rate automatically - - Arguments: - pAd - pEntry - - Return Value: - TURE - FALSE - - ======================================================================== -*/ -BOOLEAN RTMPCheckEntryEnableAutoRateSwitch( - IN PRTMP_ADAPTER pAd, - IN PMAC_TABLE_ENTRY pEntry) -{ - BOOLEAN result = TRUE; - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // only associated STA counts - if (pEntry && (pEntry->ValidAsCLI) && (pEntry->Sst == SST_ASSOC)) - { - result = pAd->StaCfg.bAutoTxRateSwitch; - } - else - result = FALSE; - -#ifdef QOS_DLS_SUPPORT - if (pEntry && (pEntry->ValidAsDls)) - result = pAd->StaCfg.bAutoTxRateSwitch; -#endif // QOS_DLS_SUPPORT // - } -#endif // CONFIG_STA_SUPPORT // - - - - return result; -} - - -BOOLEAN RTMPAutoRateSwitchCheck( - IN PRTMP_ADAPTER pAd) -{ - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if (pAd->StaCfg.bAutoTxRateSwitch) - return TRUE; - } -#endif // CONFIG_STA_SUPPORT // - return FALSE; -} - - -/* - ======================================================================== - Routine Description: - check if this entry need to fix tx legacy rate - - Arguments: - pAd - pEntry - - Return Value: - TURE - FALSE - - ======================================================================== -*/ -UCHAR RTMPStaFixedTxMode( - IN PRTMP_ADAPTER pAd, - IN PMAC_TABLE_ENTRY pEntry) -{ - UCHAR tx_mode = FIXED_TXMODE_HT; - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - tx_mode = (UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode; - } -#endif // CONFIG_STA_SUPPORT // - - return tx_mode; -} - -/* - ======================================================================== - Routine Description: - Overwrite HT Tx Mode by Fixed Legency Tx Mode, if specified. - - Arguments: - pAd - pEntry - - Return Value: - TURE - FALSE - - ======================================================================== -*/ -VOID RTMPUpdateLegacyTxSetting( - UCHAR fixed_tx_mode, - PMAC_TABLE_ENTRY pEntry) -{ - HTTRANSMIT_SETTING TransmitSetting; - - if (fixed_tx_mode == FIXED_TXMODE_HT) - return; - - TransmitSetting.word = 0; - - TransmitSetting.field.MODE = pEntry->HTPhyMode.field.MODE; - TransmitSetting.field.MCS = pEntry->HTPhyMode.field.MCS; - - if (fixed_tx_mode == FIXED_TXMODE_CCK) - { - TransmitSetting.field.MODE = MODE_CCK; - // CCK mode allow MCS 0~3 - if (TransmitSetting.field.MCS > MCS_3) - TransmitSetting.field.MCS = MCS_3; - } - else - { - TransmitSetting.field.MODE = MODE_OFDM; - // OFDM mode allow MCS 0~7 - if (TransmitSetting.field.MCS > MCS_7) - TransmitSetting.field.MCS = MCS_7; - } - - if (pEntry->HTPhyMode.field.MODE >= TransmitSetting.field.MODE) - { - pEntry->HTPhyMode.word = TransmitSetting.word; - DBGPRINT(RT_DEBUG_TRACE, ("RTMPUpdateLegacyTxSetting : wcid-%d, MODE=%s, MCS=%d \n", - pEntry->Aid, GetPhyMode(pEntry->HTPhyMode.field.MODE), pEntry->HTPhyMode.field.MCS)); - } -} - -#ifdef CONFIG_STA_SUPPORT -/* - ========================================================================== - Description: - dynamic tune BBP R66 to find a balance between sensibility and - noise isolation - - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -VOID AsicStaBbpTuning( - IN PRTMP_ADAPTER pAd) -{ - UCHAR OrigR66Value = 0, R66;//, R66UpperBound = 0x30, R66LowerBound = 0x30; - CHAR Rssi; - - // 2860C did not support Fase CCA, therefore can't tune - if (pAd->MACVersion == 0x28600100) - return; - - // - // work as a STA - // - if (pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE) // no R66 tuning when SCANNING - return; - - if ((pAd->OpMode == OPMODE_STA) - && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) - ) - && !(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) - ) - { - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &OrigR66Value); - R66 = OrigR66Value; - - if (pAd->Antenna.field.RxPath > 1) - Rssi = (pAd->StaCfg.RssiSample.AvgRssi0 + pAd->StaCfg.RssiSample.AvgRssi1) >> 1; - else - Rssi = pAd->StaCfg.RssiSample.AvgRssi0; - - if (pAd->LatchRfRegs.Channel <= 14) - { //BG band -#ifdef RT2870 - // RT3070 is a no LNA solution, it should have different control regarding to AGC gain control - // Otherwise, it will have some throughput side effect when low RSSI - if (IS_RT3070(pAd)) - { - if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY) - { - R66 = 0x1C + 2*GET_LNA_GAIN(pAd) + 0x20; - if (OrigR66Value != R66) - { - RTUSBWriteBBPRegister(pAd, BBP_R66, R66); - } - } - else - { - R66 = 0x1C + 2*GET_LNA_GAIN(pAd); - if (OrigR66Value != R66) - { - RTUSBWriteBBPRegister(pAd, BBP_R66, R66); - } - } - } - else -#endif // RT2870 // - { - if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY) - { - R66 = (0x2E + GET_LNA_GAIN(pAd)) + 0x10; - if (OrigR66Value != R66) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); - } - } - else - { - R66 = 0x2E + GET_LNA_GAIN(pAd); - if (OrigR66Value != R66) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); - } - } - } - } - else - { //A band - if (pAd->CommonCfg.BBPCurrentBW == BW_20) - { - if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY) - { - R66 = 0x32 + (GET_LNA_GAIN(pAd)*5)/3 + 0x10; - if (OrigR66Value != R66) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); - } - } - else - { - R66 = 0x32 + (GET_LNA_GAIN(pAd)*5)/3; - if (OrigR66Value != R66) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); - } - } - } - else - { - if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY) - { - R66 = 0x3A + (GET_LNA_GAIN(pAd)*5)/3 + 0x10; - if (OrigR66Value != R66) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); - } - } - else - { - R66 = 0x3A + (GET_LNA_GAIN(pAd)*5)/3; - if (OrigR66Value != R66) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); - } - } - } - } - - - } -} -#endif // CONFIG_STA_SUPPORT // - -VOID RTMPSetAGCInitValue( - IN PRTMP_ADAPTER pAd, - IN UCHAR BandWidth) -{ - UCHAR R66 = 0x30; - - if (pAd->LatchRfRegs.Channel <= 14) - { // BG band - R66 = 0x2E + GET_LNA_GAIN(pAd); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); - } - else - { //A band - if (BandWidth == BW_20) - { - R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); - } -#ifdef DOT11_N_SUPPORT - else - { - R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); - } -#endif // DOT11_N_SUPPORT // - } - -} - -VOID AsicTurnOffRFClk( - IN PRTMP_ADAPTER pAd, - IN UCHAR Channel) -{ - - // RF R2 bit 18 = 0 - UINT32 R1 = 0, R2 = 0, R3 = 0; - UCHAR index; - RTMP_RF_REGS *RFRegTable; - - RFRegTable = RF2850RegTable; - - switch (pAd->RfIcType) - { - case RFIC_2820: - case RFIC_2850: - case RFIC_2720: - case RFIC_2750: - - for (index = 0; index < NUM_OF_2850_CHNL; index++) - { - if (Channel == RFRegTable[index].Channel) - { - R1 = RFRegTable[index].R1 & 0xffffdfff; - R2 = RFRegTable[index].R2 & 0xfffbffff; - R3 = RFRegTable[index].R3 & 0xfff3ffff; - - RTMP_RF_IO_WRITE32(pAd, R1); - RTMP_RF_IO_WRITE32(pAd, R2); - - // Program R1b13 to 1, R3/b18,19 to 0, R2b18 to 0. - // Set RF R2 bit18=0, R3 bit[18:19]=0 - //if (pAd->StaCfg.bRadio == FALSE) - if (1) - { - RTMP_RF_IO_WRITE32(pAd, R3); - - DBGPRINT(RT_DEBUG_TRACE, ("AsicTurnOffRFClk#%d(RF=%d, ) , R2=0x%08x, R3 = 0x%08x \n", - Channel, pAd->RfIcType, R2, R3)); - } - else - DBGPRINT(RT_DEBUG_TRACE, ("AsicTurnOffRFClk#%d(RF=%d, ) , R2=0x%08x \n", - Channel, pAd->RfIcType, R2)); - break; - } - } - break; - - default: - break; - } -} - - -VOID AsicTurnOnRFClk( - IN PRTMP_ADAPTER pAd, - IN UCHAR Channel) -{ - - // RF R2 bit 18 = 0 - UINT32 R1 = 0, R2 = 0, R3 = 0; - UCHAR index; - RTMP_RF_REGS *RFRegTable; - - RFRegTable = RF2850RegTable; - - switch (pAd->RfIcType) - { - case RFIC_2820: - case RFIC_2850: - case RFIC_2720: - case RFIC_2750: - - for (index = 0; index < NUM_OF_2850_CHNL; index++) - { - if (Channel == RFRegTable[index].Channel) - { - R3 = pAd->LatchRfRegs.R3; - R3 &= 0xfff3ffff; - R3 |= 0x00080000; - RTMP_RF_IO_WRITE32(pAd, R3); - - R1 = RFRegTable[index].R1; - RTMP_RF_IO_WRITE32(pAd, R1); - - R2 = RFRegTable[index].R2; - if (pAd->Antenna.field.TxPath == 1) - { - R2 |= 0x4000; // If TXpath is 1, bit 14 = 1; - } - - if (pAd->Antenna.field.RxPath == 2) - { - R2 |= 0x40; // write 1 to off Rxpath. - } - else if (pAd->Antenna.field.RxPath == 1) - { - R2 |= 0x20040; // write 1 to off RxPath - } - RTMP_RF_IO_WRITE32(pAd, R2); - - break; - } - } - break; - - default: - break; - } - - DBGPRINT(RT_DEBUG_TRACE, ("AsicTurnOnRFClk#%d(RF=%d, ) , R2=0x%08x\n", - Channel, - pAd->RfIcType, - R2)); -} - +#include "../../rt2860/common/mlme.c" |