diff options
Diffstat (limited to 'drivers/staging/rt3090/chips/rt3370.c')
| -rw-r--r-- | drivers/staging/rt3090/chips/rt3370.c | 121 |
1 files changed, 0 insertions, 121 deletions
diff --git a/drivers/staging/rt3090/chips/rt3370.c b/drivers/staging/rt3090/chips/rt3370.c deleted file mode 100644 index 38ecb0623424..000000000000 --- a/drivers/staging/rt3090/chips/rt3370.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - ************************************************************************* - * Ralink Tech Inc. - * 5F., No.36, Taiyuan St., Jhubei City, - * Hsinchu County 302, - * Taiwan, R.O.C. - * - * (c) Copyright 2002-2007, Ralink Technology, Inc. - * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - ************************************************************************* - - Module Name: - rt3370.c - - Abstract: - Specific funcitons and variables for RT30xx. - - Revision History: - Who When What - -------- ---------- ---------------------------------------------- -*/ - -#ifdef RT3370 - -#include "../rt_config.h" - - -#ifndef RTMP_RF_RW_SUPPORT -#error "You Should Enable compile flag RTMP_RF_RW_SUPPORT for this chip" -#endif // RTMP_RF_RW_SUPPORT // - - -VOID NICInitRT3370RFRegisters(IN PRTMP_ADAPTER pAd) -{ - INT i; - // Driver must read EEPROM to get RfIcType before initial RF registers - // Initialize RF register to default value - if (IS_RT3090(pAd)||IS_RT3390(pAd)||IS_RT3572(pAd)) - { - // Init RF calibration - // Driver should toggle RF R30 bit7 before init RF registers - UINT32 RfReg = 0, data; - - RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg); - RfReg |= 0x80; - RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); - RTMPusecDelay(1000); - RfReg &= 0x7F; - RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); - - // init R24, R31 - RT30xxWriteRFRegister(pAd, RF_R24, 0x0F); - RT30xxWriteRFRegister(pAd, RF_R31, 0x0F); - - if (IS_RT3390(pAd)) - { - // patch LNA_PE_G1 failed issue - RTMP_IO_READ32(pAd, GPIO_SWITCH, &data); - data &= ~(0x20); - RTMP_IO_WRITE32(pAd, GPIO_SWITCH, data); - - // RF registers initialization - for (i = 0; i < NUM_RF_REG_PARMS_OVER_RT3390; i++) - { - RT30xxWriteRFRegister(pAd, RFRegTableOverRT3390[i].Register, RFRegTableOverRT3390[i].Value); - } - } - - // patch LNA_PE_G1 failed issue - RTMP_IO_READ32(pAd, GPIO_SWITCH, &data); - data &= ~(0x20); - RTMP_IO_WRITE32(pAd, GPIO_SWITCH, data); - - // Initialize RF register to default value - for (i = 0; i < NUM_RF_REG_PARMS_OVER_RT3390; i++) - { - RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value); - } - - // Driver should set RF R6 bit6 on before calibration - RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RfReg); - RfReg |= 0x40; - RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RfReg); - - //For RF filter Calibration - RTMPFilterCalibration(pAd); - - // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() - if ((pAd->MACVersion & 0xffff) < 0x0211) - RT30xxWriteRFRegister(pAd, RF_R27, 0x3); - - // set led open drain enable - RTMP_IO_READ32(pAd, OPT_14, &data); - data |= 0x01; - RTMP_IO_WRITE32(pAd, OPT_14, data); - - // set default antenna as main - if (pAd->RfIcType == RFIC_3020) - AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt); - - // add by johnli, RF power sequence setup, load RF normal operation-mode setup - RT30xxLoadRFNormalModeSetup(pAd); - } - -} -#endif // RT3070 // |