diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c index 941ff7467c3c..9f016a5401d8 100644 --- a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c +++ b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c @@ -94,7 +94,7 @@ rtl8188e_PHY_QueryBBReg( { u32 ReturnValue = 0, OriginalValue, BitShift; - OriginalValue = rtw_read32(Adapter, RegAddr); + OriginalValue = usb_read32(Adapter, RegAddr); BitShift = phy_CalculateBitShift(BitMask); ReturnValue = (OriginalValue & BitMask) >> BitShift; return ReturnValue; @@ -124,12 +124,12 @@ void rtl8188e_PHY_SetBBReg(struct adapter *Adapter, u32 RegAddr, u32 BitMask, u3 u32 OriginalValue, BitShift; if (BitMask != bMaskDWord) { /* if not "double word" write */ - OriginalValue = rtw_read32(Adapter, RegAddr); + OriginalValue = usb_read32(Adapter, RegAddr); BitShift = phy_CalculateBitShift(BitMask); Data = ((OriginalValue & (~BitMask)) | (Data << BitShift)); } - rtw_write32(Adapter, RegAddr, Data); + usb_write32(Adapter, RegAddr, Data); } @@ -386,7 +386,7 @@ s32 PHY_MACConfig8188E(struct adapter *Adapter) rtStatus = _FAIL; /* 2010.07.13 AMPDU aggregation number B */ - rtw_write16(Adapter, REG_MAX_AGGR_NUM, MAX_AGGR_NUM); + usb_write16(Adapter, REG_MAX_AGGR_NUM, MAX_AGGR_NUM); return rtStatus; } @@ -603,14 +603,14 @@ PHY_BBConfig8188E( /* Enable BB and RF */ - RegVal = rtw_read16(Adapter, REG_SYS_FUNC_EN); - rtw_write16(Adapter, REG_SYS_FUNC_EN, (u16)(RegVal|BIT13|BIT0|BIT1)); + RegVal = usb_read16(Adapter, REG_SYS_FUNC_EN); + usb_write16(Adapter, REG_SYS_FUNC_EN, (u16)(RegVal|BIT13|BIT0|BIT1)); /* 20090923 Joseph: Advised by Steven and Jenyu. Power sequence before init RF. */ - rtw_write8(Adapter, REG_RF_CTRL, RF_EN|RF_RSTB|RF_SDMRSTB); + usb_write8(Adapter, REG_RF_CTRL, RF_EN|RF_RSTB|RF_SDMRSTB); - rtw_write8(Adapter, REG_SYS_FUNC_EN, FEN_USBA | FEN_USBD | FEN_BB_GLB_RSTn | FEN_BBRSTB); + usb_write8(Adapter, REG_SYS_FUNC_EN, FEN_USBA | FEN_USBD | FEN_BB_GLB_RSTn | FEN_BBRSTB); /* Config BB and AGC */ rtStatus = phy_BB8188E_Config_ParaFile(Adapter); @@ -792,21 +792,21 @@ _PHY_SetBWMode92C( /* 3<1>Set MAC register */ /* 3 */ - regBwOpMode = rtw_read8(Adapter, REG_BWOPMODE); - regRRSR_RSC = rtw_read8(Adapter, REG_RRSR+2); + regBwOpMode = usb_read8(Adapter, REG_BWOPMODE); + regRRSR_RSC = usb_read8(Adapter, REG_RRSR+2); switch (pHalData->CurrentChannelBW) { case HT_CHANNEL_WIDTH_20: regBwOpMode |= BW_OPMODE_20MHZ; /* 2007/02/07 Mark by Emily because we have not verify whether this register works */ - rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode); + usb_write8(Adapter, REG_BWOPMODE, regBwOpMode); break; case HT_CHANNEL_WIDTH_40: regBwOpMode &= ~BW_OPMODE_20MHZ; /* 2007/02/07 Mark by Emily because we have not verify whether this register works */ - rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode); + usb_write8(Adapter, REG_BWOPMODE, regBwOpMode); regRRSR_RSC = (regRRSR_RSC&0x90) | (pHalData->nCur40MhzPrimeSC<<5); - rtw_write8(Adapter, REG_RRSR+2, regRRSR_RSC); + usb_write8(Adapter, REG_RRSR+2, regRRSR_RSC); break; default: break; |