diff options
Diffstat (limited to 'drivers/staging/rtl8188eu/include/drv_types.h')
| -rw-r--r-- | drivers/staging/rtl8188eu/include/drv_types.h | 334 |
1 files changed, 334 insertions, 0 deletions
diff --git a/drivers/staging/rtl8188eu/include/drv_types.h b/drivers/staging/rtl8188eu/include/drv_types.h new file mode 100644 index 000000000000..ad073c8af275 --- /dev/null +++ b/drivers/staging/rtl8188eu/include/drv_types.h @@ -0,0 +1,334 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +/*----------------------------------------------------------------------------- + + For type defines and data structure defines + +------------------------------------------------------------------------------*/ + + +#ifndef __DRV_TYPES_H__ +#define __DRV_TYPES_H__ + +#define DRV_NAME "r8188eu" + +#include <osdep_service.h> +#include <wlan_bssdef.h> +#include <drv_types_linux.h> +#include <rtw_ht.h> +#include <rtw_cmd.h> +#include <rtw_xmit.h> +#include <rtw_recv.h> +#include <hal_intf.h> +#include <hal_com.h> +#include <rtw_qos.h> +#include <rtw_security.h> +#include <rtw_pwrctrl.h> +#include <rtw_io.h> +#include <rtw_eeprom.h> +#include <sta_info.h> +#include <rtw_mlme.h> +#include <rtw_debug.h> +#include <rtw_rf.h> +#include <rtw_event.h> +#include <rtw_led.h> +#include <rtw_mlme_ext.h> +#include <rtw_p2p.h> +#include <rtw_ap.h> +#include <rtw_mp.h> +#include <rtw_br_ext.h> + +enum _NIC_VERSION { + RTL8711_NIC, + RTL8712_NIC, + RTL8713_NIC, + RTL8716_NIC +}; + +#define SPEC_DEV_ID_NONE BIT(0) +#define SPEC_DEV_ID_DISABLE_HT BIT(1) +#define SPEC_DEV_ID_ENABLE_PS BIT(2) +#define SPEC_DEV_ID_RF_CONFIG_1T1R BIT(3) +#define SPEC_DEV_ID_RF_CONFIG_2T2R BIT(4) +#define SPEC_DEV_ID_ASSIGN_IFNAME BIT(5) + +struct specific_device_id { + u32 flags; + u16 idVendor; + u16 idProduct; +}; + +struct registry_priv { + u8 chip_version; + u8 rfintfs; + u8 lbkmode; + u8 hci; + struct ndis_802_11_ssid ssid; + u8 network_mode; /* infra, ad-hoc, auto */ + u8 channel;/* ad-hoc support requirement */ + u8 wireless_mode;/* A, B, G, auto */ + u8 scan_mode;/* active, passive */ + u8 radio_enable; + u8 preamble;/* long, short, auto */ + u8 vrtl_carrier_sense;/* Enable, Disable, Auto */ + u8 vcs_type;/* RTS/CTS, CTS-to-self */ + u16 rts_thresh; + u16 frag_thresh; + u8 adhoc_tx_pwr; + u8 soft_ap; + u8 power_mgnt; + u8 ips_mode; + u8 smart_ps; + u8 long_retry_lmt; + u8 short_retry_lmt; + u16 busy_thresh; + u8 ack_policy; + u8 mp_mode; + u8 software_encrypt; + u8 software_decrypt; + u8 acm_method; + /* UAPSD */ + u8 wmm_enable; + u8 uapsd_enable; + u8 uapsd_max_sp; + u8 uapsd_acbk_en; + u8 uapsd_acbe_en; + u8 uapsd_acvi_en; + u8 uapsd_acvo_en; + + struct wlan_bssid_ex dev_network; + + u8 ht_enable; + u8 cbw40_enable; + u8 ampdu_enable;/* for tx */ + u8 rx_stbc; + u8 ampdu_amsdu;/* A-MPDU Supports A-MSDU is permitted */ + u8 lowrate_two_xmit; + + u8 rf_config; + u8 low_power; + + u8 wifi_spec;/* !turbo_mode */ + + u8 channel_plan; + bool bAcceptAddbaReq; + + u8 antdiv_cfg; + u8 antdiv_type; + + u8 usbss_enable;/* 0:disable,1:enable */ + u8 hwpdn_mode;/* 0:disable,1:enable,2:decide by EFUSE config */ + u8 hwpwrp_detect;/* 0:disable,1:enable */ + + u8 hw_wps_pbc;/* 0:disable,1:enable */ + + u8 max_roaming_times; /* the max number driver will try */ + + u8 fw_iol; /* enable iol without other concern */ + + u8 enable80211d; + + u8 ifname[16]; + u8 if2name[16]; + + u8 notch_filter; +}; + +/* For registry parameters */ +#define RGTRY_OFT(field) ((u32)FIELD_OFFSET(struct registry_priv, field)) +#define RGTRY_SZ(field) sizeof(((struct registry_priv *)0)->field) +#define BSSID_OFT(field) ((u32)FIELD_OFFSET(struct wlan_bssid_ex, field)) +#define BSSID_SZ(field) sizeof(((struct wlan_bssid_ex *)0)->field) + +#define MAX_CONTINUAL_URB_ERR 4 + +struct dvobj_priv { + struct adapter *if1; + struct adapter *if2; + + /* For 92D, DMDP have 2 interface. */ + u8 InterfaceNumber; + u8 NumInterfaces; + + /* In /Out Pipe information */ + int RtInPipe[2]; + int RtOutPipe[3]; + u8 Queue2Pipe[HW_QUEUE_ENTRY];/* for out pipe mapping */ + + u8 irq_alloc; + +/*-------- below is for USB INTERFACE --------*/ + + u8 nr_endpoint; + u8 ishighspeed; + u8 RtNumInPipes; + u8 RtNumOutPipes; + int ep_num[5]; /* endpoint number */ + int RegUsbSS; + struct semaphore usb_suspend_sema; + struct mutex usb_vendor_req_mutex; + + u8 *usb_alloc_vendor_req_buf; + u8 *usb_vendor_req_buf; + + struct usb_interface *pusbintf; + struct usb_device *pusbdev; + + ATOMIC_T continual_urb_error; +}; + +static inline struct device *dvobj_to_dev(struct dvobj_priv *dvobj) +{ + /* todo: get interface type from dvobj and the return + * the dev accordingly */ + return &dvobj->pusbintf->dev; +}; + +enum _IFACE_TYPE { + IFACE_PORT0, /* mapping to port0 for C/D series chips */ + IFACE_PORT1, /* mapping to port1 for C/D series chip */ + MAX_IFACE_PORT, +}; + +enum _ADAPTER_TYPE { + PRIMARY_ADAPTER, + SECONDARY_ADAPTER, + MAX_ADAPTER, +}; + +enum driver_state { + DRIVER_NORMAL = 0, + DRIVER_DISAPPEAR = 1, + DRIVER_REPLACE_DONGLE = 2, +}; + +struct adapter { + int DriverState;/* for disable driver using module, use dongle toi + * replace module. */ + int pid[3];/* process id from UI, 0:wps, 1:hostapd, 2:dhcpcd */ + int bDongle;/* build-in module or external dongle */ + u16 chip_type; + u16 HardwareType; + u16 interface_type;/* USB,SDIO,SPI,PCI */ + + struct dvobj_priv *dvobj; + struct mlme_priv mlmepriv; + struct mlme_ext_priv mlmeextpriv; + struct cmd_priv cmdpriv; + struct evt_priv evtpriv; + struct io_priv iopriv; + struct xmit_priv xmitpriv; + struct recv_priv recvpriv; + struct sta_priv stapriv; + struct security_priv securitypriv; + struct registry_priv registrypriv; + struct pwrctrl_priv pwrctrlpriv; + struct eeprom_priv eeprompriv; + struct led_priv ledpriv; + struct mp_priv mppriv; + +#ifdef CONFIG_88EU_AP_MODE + struct hostapd_priv *phostapdpriv; +#endif + + struct wifidirect_info wdinfo; + + void *HalData; + u32 hal_data_sz; + struct hal_ops HalFunc; + + s32 bDriverStopped; + s32 bSurpriseRemoved; + s32 bCardDisableWOHSM; + + u32 IsrContent; + u32 ImrContent; + + u8 EepromAddressSize; + u8 hw_init_completed; + u8 bDriverIsGoingToUnload; + u8 init_adpt_in_progress; + u8 bHaltInProgress; + + void *cmdThread; + void *evtThread; + void *xmitThread; + void *recvThread; + void (*intf_start)(struct adapter *adapter); + void (*intf_stop)(struct adapter *adapter); + struct net_device *pnetdev; + + /* used by rtw_rereg_nd_name related function */ + struct rereg_nd_name_data { + struct net_device *old_pnetdev; + char old_ifname[IFNAMSIZ]; + u8 old_ips_mode; + u8 old_bRegUseLed; + } rereg_nd_name_priv; + + int bup; + struct net_device_stats stats; + struct iw_statistics iwstats; + struct proc_dir_entry *dir_dev;/* for proc directory */ + + int net_closed; + u8 bFWReady; + u8 bBTFWReady; + u8 bReadPortCancel; + u8 bWritePortCancel; + u8 bRxRSSIDisplay; + /* The driver will show up the desired channel number + * when this flag is 1. */ + u8 bNotifyChannelChange; +#ifdef CONFIG_88EU_P2P + /* The driver will show the current P2P status when the + * upper application reads it. */ + u8 bShowGetP2PState; +#endif + struct adapter *pbuddy_adapter; + + struct mutex *hw_init_mutex; + + spinlock_t br_ext_lock; + struct nat25_network_db_entry *nethash[NAT25_HASH_SIZE]; + int pppoe_connection_in_progress; + unsigned char pppoe_addr[MACADDRLEN]; + unsigned char scdb_mac[MACADDRLEN]; + unsigned char scdb_ip[4]; + struct nat25_network_db_entry *scdb_entry; + unsigned char br_mac[MACADDRLEN]; + unsigned char br_ip[4]; + struct br_ext_info ethBrExtInfo; + + u8 fix_rate; + + unsigned char in_cta_test; +}; + +#define adapter_to_dvobj(adapter) (adapter->dvobj) + +int rtw_handle_dualmac(struct adapter *adapter, bool init); + +static inline u8 *myid(struct eeprom_priv *peepriv) +{ + return peepriv->mac_addr; +} + +#endif /* __DRV_TYPES_H__ */ |