diff options
Diffstat (limited to 'drivers/staging/rtl8188eu/include/ieee80211.h')
| -rw-r--r-- | drivers/staging/rtl8188eu/include/ieee80211.h | 114 |
1 files changed, 59 insertions, 55 deletions
diff --git a/drivers/staging/rtl8188eu/include/ieee80211.h b/drivers/staging/rtl8188eu/include/ieee80211.h index 284db7d00f50..9f480ccec531 100644 --- a/drivers/staging/rtl8188eu/include/ieee80211.h +++ b/drivers/staging/rtl8188eu/include/ieee80211.h @@ -202,9 +202,9 @@ enum NETWORK_TYPE { #define IsSupportedTxCCK(NetType) \ ((NetType) & (WIRELESS_11B) ? true : false) #define IsSupportedTxOFDM(NetType) \ - ((NetType) & (WIRELESS_11G|WIRELESS_11A) ? true : false) + ((NetType) & (WIRELESS_11G | WIRELESS_11A) ? true : false) #define IsSupportedTxMCS(NetType) \ - ((NetType) & (WIRELESS_11_24N|WIRELESS_11_5N) ? true : false) + ((NetType) & (WIRELESS_11_24N | WIRELESS_11_5N) ? true : false) struct ieee_param { @@ -276,12 +276,13 @@ struct sta_data { #define IEEE80211_DATA_LEN 2304 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section - 6.2.1.1.2. + * 6.2.1.1.2. - The figure in section 7.1.2 suggests a body size of up to 2312 - bytes is allowed, which is a bit confusing, I suspect this - represents the 2304 bytes of real data, plus a possible 8 bytes of - WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ + * The figure in section 7.1.2 suggests a body size of up to 2312 + * bytes is allowed, which is a bit confusing, I suspect this + * represents the 2304 bytes of real data, plus a possible 8 bytes of + * WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) + */ #define IEEE80211_HLEN 30 @@ -358,11 +359,11 @@ struct ieee80211_snap_hdr { #define IEEE80211_DATA_HDR3_LEN 24 #define IEEE80211_DATA_HDR4_LEN 30 -#define IEEE80211_CCK_MODULATION (1<<0) -#define IEEE80211_OFDM_MODULATION (1<<1) +#define IEEE80211_CCK_MODULATION BIT(0) +#define IEEE80211_OFDM_MODULATION BIT(1) -#define IEEE80211_24GHZ_BAND (1<<0) -#define IEEE80211_52GHZ_BAND (1<<1) +#define IEEE80211_24GHZ_BAND BIT(0) +#define IEEE80211_52GHZ_BAND BIT(1) #define IEEE80211_CCK_RATE_LEN 4 #define IEEE80211_NUM_OFDM_RATESLEN 8 @@ -383,18 +384,18 @@ struct ieee80211_snap_hdr { #define IEEE80211_OFDM_RATE_54MB 0x6C #define IEEE80211_BASIC_RATE_MASK 0x80 -#define IEEE80211_CCK_RATE_1MB_MASK (1<<0) -#define IEEE80211_CCK_RATE_2MB_MASK (1<<1) -#define IEEE80211_CCK_RATE_5MB_MASK (1<<2) -#define IEEE80211_CCK_RATE_11MB_MASK (1<<3) -#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4) -#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5) -#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6) -#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7) -#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8) -#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9) -#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10) -#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11) +#define IEEE80211_CCK_RATE_1MB_MASK BIT(0) +#define IEEE80211_CCK_RATE_2MB_MASK BIT(1) +#define IEEE80211_CCK_RATE_5MB_MASK BIT(2) +#define IEEE80211_CCK_RATE_11MB_MASK BIT(3) +#define IEEE80211_OFDM_RATE_6MB_MASK BIT(4) +#define IEEE80211_OFDM_RATE_9MB_MASK BIT(5) +#define IEEE80211_OFDM_RATE_12MB_MASK BIT(6) +#define IEEE80211_OFDM_RATE_18MB_MASK BIT(7) +#define IEEE80211_OFDM_RATE_24MB_MASK BIT(8) +#define IEEE80211_OFDM_RATE_36MB_MASK BIT(9) +#define IEEE80211_OFDM_RATE_48MB_MASK BIT(10) +#define IEEE80211_OFDM_RATE_54MB_MASK BIT(11) #define IEEE80211_CCK_RATES_MASK 0x0000000F #define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \ @@ -423,18 +424,19 @@ struct ieee80211_snap_hdr { /* IEEE 802.11 requires that STA supports concurrent reception of at least * three fragmented frames. This define can be increased to support more * concurrent frames, but it should be noted that each entry can consume about - * 2 kB of RAM and increasing cache size will slow down frame reassembly. */ + * 2 kB of RAM and increasing cache size will slow down frame reassembly. + */ #define IEEE80211_FRAG_CACHE_LEN 4 -#define SEC_KEY_1 (1<<0) -#define SEC_KEY_2 (1<<1) -#define SEC_KEY_3 (1<<2) -#define SEC_KEY_4 (1<<3) -#define SEC_ACTIVE_KEY (1<<4) -#define SEC_AUTH_MODE (1<<5) -#define SEC_UNICAST_GROUP (1<<6) -#define SEC_LEVEL (1<<7) -#define SEC_ENABLED (1<<8) +#define SEC_KEY_1 BIT(0) +#define SEC_KEY_2 BIT(1) +#define SEC_KEY_3 BIT(2) +#define SEC_KEY_4 BIT(3) +#define SEC_ACTIVE_KEY BIT(4) +#define SEC_AUTH_MODE BIT(5) +#define SEC_UNICAST_GROUP BIT(6) +#define SEC_LEVEL BIT(7) +#define SEC_ENABLED BIT(8) #define SEC_LEVEL_0 0 /* None */ #define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ @@ -451,7 +453,8 @@ struct ieee80211_snap_hdr { /* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs * only use 8, and then use extended rates for the remaining supported * rates. Other APs, however, stick all of their supported rates on the - * main rates information element... */ + * main rates information element... + */ #define MAX_RATES_LENGTH ((u8)12) #define MAX_RATES_EX_LENGTH ((u8)16) #define MAX_NETWORK_COUNT 128 @@ -467,17 +470,17 @@ struct ieee80211_snap_hdr { #define MAX_P2P_IE_LEN (256) #define MAX_WFD_IE_LEN (128) -#define NETWORK_EMPTY_ESSID (1<<0) -#define NETWORK_HAS_OFDM (1<<1) -#define NETWORK_HAS_CCK (1<<2) +#define NETWORK_EMPTY_ESSID BIT(0) +#define NETWORK_HAS_OFDM BIT(1) +#define NETWORK_HAS_CCK BIT(2) #define IW_ESSID_MAX_SIZE 32 /* -join_res: --1: authentication fail --2: association fail -> 0: TID -*/ + * join_res: + * -1: authentication fail + * -2: association fail + * > 0: TID + */ enum ieee80211_state { /* the card is not linked at all */ @@ -531,15 +534,15 @@ static inline int is_broadcast_mac_addr(const u8 *addr) (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff); } -#define CFG_IEEE80211_RESERVE_FCS (1<<0) -#define CFG_IEEE80211_COMPUTE_FCS (1<<1) +#define CFG_IEEE80211_RESERVE_FCS BIT(0) +#define CFG_IEEE80211_COMPUTE_FCS BIT(1) #define MAXTID 16 -#define IEEE_A (1<<0) -#define IEEE_B (1<<1) -#define IEEE_G (1<<2) -#define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G) +#define IEEE_A BIT(0) +#define IEEE_B BIT(1) +#define IEEE_G BIT(2) +#define IEEE_MODE_MASK (IEEE_A | IEEE_B | IEEE_G) /* Action category code */ enum rtw_ieee80211_category { @@ -615,7 +618,8 @@ enum rtw_ieee80211_back_parties { }; #define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs) - * 00:50:F2 */ + * 00:50:F2 + */ #define WME_OUI_TYPE 2 #define WME_OUI_SUBTYPE_INFORMATION_ELEMENT 0 #define WME_OUI_SUBTYPE_PARAMETER_ELEMENT 1 @@ -655,12 +659,12 @@ enum rtw_ieee80211_back_parties { * is not permitted. */ enum rtw_ieee80211_channel_flags { - RTW_IEEE80211_CHAN_DISABLED = 1<<0, - RTW_IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, - RTW_IEEE80211_CHAN_NO_IBSS = 1<<2, - RTW_IEEE80211_CHAN_RADAR = 1<<3, - RTW_IEEE80211_CHAN_NO_HT40PLUS = 1<<4, - RTW_IEEE80211_CHAN_NO_HT40MINUS = 1<<5, + RTW_IEEE80211_CHAN_DISABLED = BIT(0), + RTW_IEEE80211_CHAN_PASSIVE_SCAN = BIT(1), + RTW_IEEE80211_CHAN_NO_IBSS = BIT(2), + RTW_IEEE80211_CHAN_RADAR = BIT(3), + RTW_IEEE80211_CHAN_NO_HT40PLUS = BIT(4), + RTW_IEEE80211_CHAN_NO_HT40MINUS = BIT(5), }; #define RTW_IEEE80211_CHAN_NO_HT40 \ |