diff options
Diffstat (limited to 'drivers/staging/rtl8188eu/include/odm.h')
| -rw-r--r-- | drivers/staging/rtl8188eu/include/odm.h | 46 |
1 files changed, 29 insertions, 17 deletions
diff --git a/drivers/staging/rtl8188eu/include/odm.h b/drivers/staging/rtl8188eu/include/odm.h index 4fb3bb07ceaa..95426b7c6dbf 100644 --- a/drivers/staging/rtl8188eu/include/odm.h +++ b/drivers/staging/rtl8188eu/include/odm.h @@ -36,7 +36,8 @@ /* Mainly, it just retains last scan result and scan again. */ /* After that, it compares the scan result to see which one gets better * RSSI. It selects antenna with better receiving power and returns better - * scan result. */ + * scan result. + */ #define TP_MODE 0 #define RSSI_MODE 1 @@ -173,10 +174,12 @@ struct rx_hpc { /* This indicates two different steps. */ /* In SWAW_STEP_PEAK, driver needs to switch antenna and listen to - * the signal on the air. */ + * the signal on the air. + */ /* In SWAW_STEP_DETERMINE, driver just compares the signal captured in * SWAW_STEP_PEAK with original RSSI to determine if it is necessary to - * switch antenna. */ + * switch antenna. + */ #define SWAW_STEP_PEAK 0 #define SWAW_STEP_DETERMINE 1 @@ -265,7 +268,8 @@ struct odm_phy_status_info { s8 RxPower; /* in dBm Translate from PWdB */ s8 RecvSignalPower;/* Real power in dBm for this packet, no * beautification and aggregation. Keep this raw - * info to be used for the other procedures. */ + * info to be used for the other procedures. + */ u8 BTRxRSSIPercentage; u8 SignalStrength; /* in 0-100 index. */ u8 RxPwr[MAX_PATH_NUM_92CS];/* per-path's pwdb */ @@ -478,7 +482,7 @@ enum odm_operation_mode { /* ODM_CMNINFO_WM_MODE */ enum odm_wireless_mode { - ODM_WM_UNKNOW = 0x0, + ODM_WM_UNKNOWN = 0x0, ODM_WM_B = BIT(0), ODM_WM_G = BIT(1), ODM_WM_A = BIT(2), @@ -509,7 +513,7 @@ enum odm_security { ODM_SEC_RESERVE = 3, ODM_SEC_AESCCMP = 4, ODM_SEC_WEP104 = 5, - ODM_WEP_WPA_MIXED = 6, /* WEP + WPA */ + ODM_WEP_WPA_MIXED = 6, /* WEP + WPA */ ODM_SEC_SMS4 = 7, }; @@ -567,7 +571,8 @@ struct odm_ra_info { u8 PTPreRssi; /* if RSSI change 5% do PT */ u8 PTModeSS; /* decide whitch rate should do PT */ u8 RAstage; /* StageRA, decide how many times RA will be done - * between PT */ + * between PT + */ u8 PTSmoothFactor; }; @@ -587,12 +592,14 @@ struct odm_rf_cal { u8 TXPowercount; bool bTXPowerTracking; u8 TxPowerTrackControl; /* for mp mode, turn off txpwrtracking - * as default */ + * as default + */ u8 TM_Trigger; u8 InternalPA5G[2]; /* pathA / pathB */ u8 ThermalMeter[2]; /* ThermalMeter, index 0 for RFIC0, - * and 1 for RFIC1 */ + * and 1 for RFIC1 + */ u8 ThermalValue; u8 ThermalValue_LCK; u8 ThermalValue_IQK; @@ -688,7 +695,7 @@ enum ant_div_type { /* Copy from SD4 defined structure. We use to support PHY DM integration. */ struct odm_dm_struct { - /* Add for different team use temporarily */ + /* Add for different team use temporarily */ struct adapter *Adapter; /* For CE/NIC team */ struct rtl8192cd_priv *priv; /* For AP/ADSL team */ /* WHen you use above pointers, they must be initialized. */ @@ -714,7 +721,8 @@ struct odm_dm_struct { /* ODM PCIE/USB/SDIO/GSPI = 0/1/2/3 */ u8 SupportInterface; /* ODM composite or independent. Bit oriented/ 92C+92D+ .... or any - * other type = 1/2/3/... */ + * other type = 1/2/3/... + */ u32 SupportICType; /* Cut Version TestChip/A-cut/B-cut... = 0/1/2/3/... */ u8 CutVersion; @@ -788,19 +796,21 @@ struct odm_dm_struct { bool bBtHsOperation; /* BT HS mode is under progress */ u8 btHsDigVal; /* use BT rssi to decide the DIG value */ bool bBtDisableEdcaTurbo;/* Under some condition, don't enable the - * EDCA Turbo */ + * EDCA Turbo + */ bool bBtBusy; /* BT is busy. */ /* CALL BY VALUE------------- */ /* 2 Define STA info. */ /* _ODM_STA_INFO */ - /* For MP, we need to reduce one array pointer for default port.?? */ + /* For MP, we need to reduce one array pointer for default port.??*/ struct sta_info *pODM_StaInfo[ODM_ASSOCIATE_ENTRY_NUM]; u16 CurrminRptTime; struct odm_ra_info RAInfo[ODM_ASSOCIATE_ENTRY_NUM]; /* Use MacID as - * array index. STA MacID=0, - * VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1} */ + * array index. STA MacID=0, + * VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1} + */ /* */ /* 2012/02/14 MH Add to share 88E ra with other SW team. */ /* We need to colelct all support abilit to a proper area. */ @@ -1029,9 +1039,11 @@ extern u8 CCKSwingTable_Ch14[CCK_TABLE_SIZE][8]; /* 20100514 Joseph: Add definition for antenna switching test after link. */ /* This indicates two different the steps. */ /* In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the - * signal on the air. */ + * signal on the air. + */ /* In SWAW_STEP_DETERMINE, driver just compares the signal captured in - * SWAW_STEP_PEAK */ + * SWAW_STEP_PEAK + */ /* with original RSSI to determine if it is necessary to switch antenna. */ #define SWAW_STEP_PEAK 0 #define SWAW_STEP_DETERMINE 1 |