diff options
Diffstat (limited to 'drivers/staging/rtl8188eu/include/pwrseq.h')
| -rw-r--r-- | drivers/staging/rtl8188eu/include/pwrseq.h | 84 |
1 files changed, 42 insertions, 42 deletions
diff --git a/drivers/staging/rtl8188eu/include/pwrseq.h b/drivers/staging/rtl8188eu/include/pwrseq.h index 43db92dcb8b3..8c876c6c7a4f 100644 --- a/drivers/staging/rtl8188eu/include/pwrseq.h +++ b/drivers/staging/rtl8188eu/include/pwrseq.h @@ -65,31 +65,31 @@ * comment here */ \ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1}, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)}, \ /* wait till 0x04[17] = 1 power ready*/ \ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0|BIT1, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0) | BIT(1), 0}, \ /* 0x02[1:0] = 0 reset BB*/ \ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \ /*0x24[23] = 2b'01 schmit trigger */ \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, \ /* 0x04[15] = 0 disable HWPDN (control by DRV)*/ \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4|BIT3, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4) | BIT(3), 0}, \ /*0x04[12:11] = 2b'00 disable WL suspend*/ \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ /*0x04[8] = 1 polling until return 0*/ \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, \ /*wait till 0x04[8] = 0*/ \ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \ /*LDO normal mode*/ \ {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ /*SDIO Driving*/ #define RTL8188E_TRANS_ACT_TO_CARDEMU \ @@ -102,13 +102,13 @@ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \ /*0x1F[7:0] = 0 turn off RF*/ \ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ /*LDO Sleep mode*/ \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ /*0x04[9] = 1 turn off MAC by HW state machine*/ \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, \ /*wait till 0x04[9] = 0 polling until return 0 to disable*/ #define RTL8188E_TRANS_CARDEMU_TO_SUS \ @@ -119,28 +119,28 @@ */ \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ - PWR_CMD_WRITE, BIT3|BIT4, BIT3}, \ + PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \ /* 0x04[12:11] = 2b'01enable WL suspend */ \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3|BIT4}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) | BIT(4)}, \ /* 0x04[12:11] = 2b'11enable WL suspend for PCIe */ \ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ - PWR_CMD_WRITE, 0xFF, BIT7}, \ + PWR_CMD_WRITE, 0xFF, BIT(7)}, \ /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ - PWR_CMD_WRITE, BIT4, 0}, \ + PWR_CMD_WRITE, BIT(4), 0}, \ /*Clear SIC_EN register 0x40[12] = 1'b0 */ \ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ - PWR_CMD_WRITE, BIT4, BIT4}, \ + PWR_CMD_WRITE, BIT(4), BIT(4)}, \ /*Set USB suspend enable local register 0xfe10[4]=1 */ \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ /*Set SDIO suspend local register*/ \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0}, \ /*wait power state to suspend*/ #define RTL8188E_TRANS_SUS_TO_CARDEMU \ @@ -150,13 +150,13 @@ * comments here */ \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \ /*Set SDIO suspend local register*/ \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \ /*wait power state to suspend*/ \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), 0}, \ /*0x04[12:11] = 2b'01enable WL suspend*/ #define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \ @@ -166,11 +166,11 @@ * comments here */ \ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \ /*0x24[23] = 2b'01 schmit trigger */ \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ - PWR_CMD_WRITE, BIT3|BIT4, BIT3}, \ + PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \ /*0x04[12:11] = 2b'01 enable WL suspend*/ \ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ @@ -178,16 +178,16 @@ /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \ - PWR_CMD_WRITE, BIT4, 0}, \ + PWR_CMD_WRITE, BIT(4), 0}, \ /*Clear SIC_EN register 0x40[12] = 1'b0 */ \ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ /*Set USB suspend enable local register 0xfe10[4]=1 */ \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ /*Set SDIO suspend local register*/ \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0}, \ /*wait power state to suspend*/ #define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \ @@ -197,13 +197,13 @@ * comments here */ \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \ /*Set SDIO suspend local register*/ \ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ - PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \ /*wait power state to suspend*/ \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), 0}, \ /*0x04[12:11] = 2b'01enable WL suspend*/ #define RTL8188E_TRANS_CARDEMU_TO_PDN \ @@ -213,10 +213,10 @@ * comments here */ \ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \ /* 0x04[16] = 0*/ \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \ /* 0x04[15] = 1*/ #define RTL8188E_TRANS_PDN_TO_CARDEMU \ @@ -226,7 +226,7 @@ * comments here */ \ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, \ /* 0x04[15] = 0*/ /* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */ @@ -251,7 +251,7 @@ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ /*Should be zero if no packet is transmitting*/ \ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \ /*CCK and OFDM are disabled,and clock are gated*/ \ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, \ @@ -259,9 +259,9 @@ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0},/*check if removed later*/\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0},/*check if removed later*/\ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)}, \ /*Respond TxOK to scheduler*/ @@ -280,22 +280,22 @@ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/ \ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \ /* 0x08[4] = 0 switch TSF to 40M */ \ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0}, \ /* Polling 0x109[7]=0 TSF in 40M */ \ {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6) | BIT(7), 0}, \ /* 0x29[7:6] = 2b'00 enable BB clock */ \ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ /* 0x101[1] = 1 */ \ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \ /* 0x100[7:0] = 0xFF enable WMAC TRX */ \ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ - PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0}, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)}, \ /* 0x02[1:0] = 2b'11 enable BB macro */ \ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/ |