diff options
Diffstat (limited to 'drivers/staging/rtl8188eu/include/rtw_cmd.h')
| -rw-r--r-- | drivers/staging/rtl8188eu/include/rtw_cmd.h | 222 |
1 files changed, 113 insertions, 109 deletions
diff --git a/drivers/staging/rtl8188eu/include/rtw_cmd.h b/drivers/staging/rtl8188eu/include/rtw_cmd.h index f79feeb4e38f..2c026bf6fecb 100644 --- a/drivers/staging/rtl8188eu/include/rtw_cmd.h +++ b/drivers/staging/rtl8188eu/include/rtw_cmd.h @@ -97,13 +97,13 @@ enum RFINTFS { }; /* -Caller Mode: Infra, Ad-HoC(C) - -Notes: To disconnect the current associated BSS - -Command Mode - -*/ + * Caller Mode: Infra, Ad-HoC(C) + * + * Notes: To disconnect the current associated BSS + * + * Command Mode + * + */ struct disconnect_parm { u32 deauth_timeout_ms; }; @@ -114,13 +114,13 @@ struct setopmode_parm { }; /* -Caller Mode: AP, Ad-HoC, Infra - -Notes: To ask RTL8711 performing site-survey - -Command-Event Mode - -*/ + * Caller Mode: AP, Ad-HoC, Infra + * + * Notes: To ask RTL8711 performing site-survey + * + * Command-Event Mode + * + */ #define RTW_SSID_SCAN_AMOUNT 9 /* for WEXT_CSCAN_AMOUNT 9 */ #define RTW_CHANNEL_SCAN_AMOUNT (14+37) @@ -133,13 +133,13 @@ struct sitesurvey_parm { }; /* -Caller Mode: Any - -Notes: To set the auth type of RTL8711. open/shared/802.1x - -Command Mode - -*/ + * Caller Mode: Any + * + * Notes: To set the auth type of RTL8711. open/shared/802.1x + * + * Command Mode + * + */ struct setauth_parm { u8 mode; /* 0: legacy open, 1: legacy shared 2: 802.1x */ u8 _1x; /* 0: PSK, 1: TLS */ @@ -147,40 +147,42 @@ struct setauth_parm { }; /* -Caller Mode: Infra - -a. algorithm: wep40, wep104, tkip & aes -b. keytype: grp key/unicast key -c. key contents - -when shared key ==> keyid is the camid -when 802.1x ==> keyid [0:1] ==> grp key -when 802.1x ==> keyid > 2 ==> unicast key - -*/ + * Caller Mode: Infra + * + * a. algorithm: wep40, wep104, tkip & aes + * b. keytype: grp key/unicast key + * c. key contents + * + * when shared key ==> keyid is the camid + * when 802.1x ==> keyid [0:1] ==> grp key + * when 802.1x ==> keyid > 2 ==> unicast key + * + */ struct setkey_parm { u8 algorithm; /* could be none, wep40, TKIP, CCMP, wep104 */ u8 keyid; u8 grpkey; /* 1: this is the grpkey for 802.1x. - * 0: this is the unicast key for 802.1x */ + * 0: this is the unicast key for 802.1x + */ u8 set_tx; /* 1: main tx key for wep. 0: other key. */ u8 key[16]; /* this could be 40 or 104 */ }; /* -When in AP or Ad-Hoc mode, this is used to -allocate an sw/hw entry for a newly associated sta. - -Command - -when shared key ==> algorithm/keyid - -*/ + * When in AP or Ad-Hoc mode, this is used to + * allocate an sw/hw entry for a newly associated sta. + * + * Command + * + * when shared key ==> algorithm/keyid + * + */ struct set_stakey_parm { u8 addr[ETH_ALEN]; u8 algorithm; u8 id;/* currently for erasing cam entry if - * algorithm == _NO_PRIVACY_ */ + * algorithm == _NO_PRIVACY_ + */ u8 key[16]; }; @@ -191,15 +193,15 @@ struct set_stakey_rsp { }; /* -Caller Ad-Hoc/AP - -Command -Rsp(AID == CAMID) mode - -This is to force fw to add an sta_data entry per driver's request. - -FW will write an cam entry associated with it. - -*/ + * Caller Ad-Hoc/AP + * + * Command -Rsp(AID == CAMID) mode + * + * This is to force fw to add an sta_data entry per driver's request. + * + * FW will write an cam entry associated with it. + * + */ struct set_assocsta_parm { u8 addr[ETH_ALEN]; }; @@ -210,55 +212,57 @@ struct set_assocsta_rsp { }; /* - Notes: This command is used for H2C/C2H loopback testing - - mac[0] == 0 - ==> CMD mode, return H2C_SUCCESS. - The following condition must be true under CMD mode - mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0; - s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7; - s2 == (b1 << 8 | b0); - - mac[0] == 1 - ==> CMD_RSP mode, return H2C_SUCCESS_RSP - - The rsp layout shall be: - rsp: parm: - mac[0] = mac[5]; - mac[1] = mac[4]; - mac[2] = mac[3]; - mac[3] = mac[2]; - mac[4] = mac[1]; - mac[5] = mac[0]; - s0 = s1; - s1 = swap16(s0); - w0 = swap32(w1); - b0 = b1 - s2 = s0 + s1 - b1 = b0 - w1 = w0 - - mac[0] == 2 - ==> CMD_EVENT mode, return H2C_SUCCESS - The event layout shall be: - event: parm: - mac[0] = mac[5]; - mac[1] = mac[4]; - mac[2] = event's seq no, starting from 1 to parm's marc[3] - mac[3] = mac[2]; - mac[4] = mac[1]; - mac[5] = mac[0]; - s0 = swap16(s0) - event.mac[2]; - s1 = s1 + event.mac[2]; - w0 = swap32(w0); - b0 = b1 - s2 = s0 + event.mac[2] - b1 = b0 - w1 = swap32(w1) - event.mac[2]; - - parm->mac[3] is the total event counts that host requested. - event will be the same with the cmd's param. -*/ + * Notes: This command is used for H2C/C2H loopback testing + * + * mac[0] == 0 + * ==> CMD mode, return H2C_SUCCESS. + * The following condition must be true under CMD mode + * mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0; + * s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7; + * s2 == (b1 << 8 | b0); + * + * mac[0] == 1 + * ==> CMD_RSP mode, return H2C_SUCCESS_RSP + * + * The rsp layout shall be: + * rsp: parm: + * mac[0] = mac[5]; + * mac[1] = mac[4]; + * mac[2] = mac[3]; + * mac[3] = mac[2]; + * mac[4] = mac[1]; + * mac[5] = mac[0]; + * s0 = s1; + * s1 = swap16(s0); + * w0 = swap32(w1); + * b0 = b1 + * s2 = s0 + s1 + * b1 = b0 + * w1 = w0 + * + * mac[0] == 2 + * ==> CMD_EVENT mode, return H2C_SUCCESS + * The event layout shall be: + * event: parm: + * mac[0] = mac[5]; + * mac[1] = mac[4]; + * mac[2] = event's seq no, starting from 1 to parm's marc[3] + * mac[2] = event's seq no, starting from 1 to parm's marc[3] + * mac[2] = event's seq no, starting from 1 to parm's marc[3] + * mac[3] = mac[2]; + * mac[4] = mac[1]; + * mac[5] = mac[0]; + * s0 = swap16(s0) - event.mac[2]; + * s1 = s1 + event.mac[2]; + * w0 = swap32(w0); + * b0 = b1 + * s2 = s0 + event.mac[2] + * b1 = b0 + * w1 = swap32(w1) - event.mac[2]; + * + * parm->mac[3] is the total event counts that host requested. + * event will be the same with the cmd's param. + */ /* CMD param Format for driver extra cmd handler */ struct drvextra_cmd_parm { @@ -285,15 +289,15 @@ struct SetChannelPlan_param { }; /* - -Result: -0x00: success -0x01: success, and check Response. -0x02: cmd ignored due to duplicated sequcne number -0x03: cmd dropped due to invalid cmd code -0x04: reserved. - -*/ + * + * Result: + * 0x00: success + * 0x01: success, and check Response. + * 0x02: cmd ignored due to duplicated sequcne number + * 0x03: cmd dropped due to invalid cmd code + * 0x04: reserved. + * + */ #define H2C_SUCCESS 0x00 #define H2C_SUCCESS_RSP 0x01 |