aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/rtl8192e/rtllib.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/rtl8192e/rtllib.h')
-rw-r--r--drivers/staging/rtl8192e/rtllib.h175
1 files changed, 55 insertions, 120 deletions
diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index cef2dc27103f..3c8b708df5c3 100644
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -66,25 +66,8 @@
#define IW_CUSTOM_MAX 256 /* In bytes */
#endif
-#ifndef container_of
-/**
- * container_of - cast a member of a structure out to the containing structure
- *
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({ \
- const typeof(((type *)0)->member)*__mptr = (ptr); \
- (type *)((char *)__mptr - offsetof(type, member)); })
-#endif
-
#define skb_tail_pointer_rsl(skb) skb_tail_pointer(skb)
-#define EXPORT_SYMBOL_RSL(x) EXPORT_SYMBOL(x)
-
-
#define queue_delayed_work_rsl(x, y, z) queue_delayed_work(x, y, z)
#define INIT_DELAYED_WORK_RSL(x, y, z) INIT_DELAYED_WORK(x, y)
@@ -482,9 +465,6 @@ enum rt_op_mode {
#define IEEE_CRYPT_ALG_NAME_LEN 16
#define MAX_IE_LEN 0xff
-#define RT_ASSERT_RET(_Exp) do {} while (0)
-#define RT_ASSERT_RET_VALUE(_Exp, Ret) \
- do {} while (0)
struct ieee_param {
u32 cmd;
@@ -525,17 +505,17 @@ struct ieee_param {
#define IW_QUAL_NOISE_UPDATED 0x4
#endif
-#define MSECS(t) msecs_to_jiffies(t)
#define msleep_interruptible_rsl msleep_interruptible
#define RTLLIB_DATA_LEN 2304
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
- 6.2.1.1.2.
-
- The figure in section 7.1.2 suggests a body size of up to 2312
- bytes is allowed, which is a bit confusing, I suspect this
- represents the 2304 bytes of real data, plus a possible 8 bytes of
- WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+ * 6.2.1.1.2.
+ *
+ * The figure in section 7.1.2 suggests a body size of up to 2312
+ * bytes is allowed, which is a bit confusing, I suspect this
+ * represents the 2304 bytes of real data, plus a possible 8 bytes of
+ * WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro)
+ */
#define RTLLIB_1ADDR_LEN 10
#define RTLLIB_2ADDR_LEN 16
#define RTLLIB_3ADDR_LEN 24
@@ -711,20 +691,13 @@ do { \
#define RTLLIB_DEBUG_DATA(level, data, datalen) \
do { \
if ((rtllib_debug_level & (level)) == (level)) { \
- int i; \
- u8 *pdata = (u8 *)data; \
printk(KERN_DEBUG "rtllib: %s()\n", __func__); \
- for (i = 0; i < (int)(datalen); i++) { \
- printk("%2.2x ", pdata[i]); \
- if ((i+1)%16 == 0) \
- printk("\n"); \
- } \
- printk("\n"); \
+ print_hex_dump_bytes(KERN_DEBUG, DUMP_PREFIX_NONE, \
+ data, datalen); \
} \
} while (0)
-/*
- * To use the debug system;
+/* To use the debug system;
*
* If you are defining a new debug classification, simply add it to the #define
* list here in the form of:
@@ -743,8 +716,6 @@ do { \
* % cat /proc/net/ipw/debug_level
*
* you simply need to add your entry to the ipw_debug_levels array.
- *
- *
*/
#define RTLLIB_DL_INFO (1<<0)
@@ -769,8 +740,8 @@ do { \
#define RTLLIB_DL_TRACE (1<<29)
#define RTLLIB_DL_DATA (1<<30)
#define RTLLIB_DL_ERR (1<<31)
-#define RTLLIB_ERROR(f, a...) printk(KERN_ERR "rtllib: " f, ## a)
-#define RTLLIB_WARNING(f, a...) printk(KERN_WARNING "rtllib: " f, ## a)
+#define RTLLIB_ERROR(f, a...) pr_err("rtllib: " f, ## a)
+#define RTLLIB_WARNING(f, a...) pr_warn("rtllib: " f, ## a)
#define RTLLIB_DEBUG_INFO(f, a...) RTLLIB_DEBUG(RTLLIB_DL_INFO, f, ## a)
#define RTLLIB_DEBUG_WX(f, a...) RTLLIB_DEBUG(RTLLIB_DL_WX, f, ## a)
@@ -784,26 +755,6 @@ do { \
#define RTLLIB_DEBUG_RX(f, a...) RTLLIB_DEBUG(RTLLIB_DL_RX, f, ## a)
#define RTLLIB_DEBUG_QOS(f, a...) RTLLIB_DEBUG(RTLLIB_DL_QOS, f, ## a)
-/* Added by Annie, 2005-11-22. */
-#define MAX_STR_LEN 64
-/* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. */
-#define PRINTABLE(_ch) (_ch > '!' && _ch < '~')
-#define RTLLIB_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) \
- if ((_Comp) & level) { \
- int __i; \
- u8 struct buffer[MAX_STR_LEN]; \
- int length = (_Len < MAX_STR_LEN) ? _Len : (MAX_STR_LEN-1) ;\
- memset(struct buffer, 0, MAX_STR_LEN); \
- memcpy(struct buffer, (u8 *)_Ptr, length); \
- for (__i = 0; __i < MAX_STR_LEN; __i++) { \
- if (!PRINTABLE(struct buffer[__i])) \
- struct buffer[__i] = '?'; \
- } \
- struct buffer[length] = '\0'; \
- printk(KERN_INFO "Rtl819x: "); \
- printk(_TitleString); \
- printk(": %d, <%s>\n", _Len, struct buffer); \
- }
#ifndef ETH_P_PAE
#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
#define ETH_P_IP 0x0800 /* Internet Protocol packet */
@@ -1022,7 +973,8 @@ struct rtllib_rx_stats {
/* IEEE 802.11 requires that STA supports concurrent reception of at least
* three fragmented frames. This define can be increased to support more
* concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly.
+ */
#define RTLLIB_FRAG_CACHE_LEN 4
struct rtllib_frag_entry {
@@ -1100,16 +1052,15 @@ struct rtllib_security {
} __packed;
-/*
- 802.11 data frame from AP
- ,-------------------------------------------------------------------.
-Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
- |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
- | | tion | (BSSID) | | | ence | data | |
- `-------------------------------------------------------------------'
-Total: 28-2340 bytes
-*/
+/* 802.11 data frame from AP
+ * ,-------------------------------------------------------------------.
+ * Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
+ * |------|------|---------|---------|---------|------|---------|------|
+ * Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
+ * | | tion | (BSSID) | | | ence | data | |
+ * `-------------------------------------------------------------------'
+ * Total: 28-2340 bytes
+ */
/* Management Frame Information Element Types */
enum rtllib_mfie {
@@ -1147,7 +1098,8 @@ enum rtllib_mfie {
/* Minimal header; can be used for passing 802.11 frames with sufficient
* information to determine what type of underlying data type is actually
- * stored in the data. */
+ * stored in the data.
+ */
struct rtllib_pspoll_hdr {
__le16 frame_ctl;
__le16 aid;
@@ -1257,7 +1209,8 @@ struct rtllib_probe_response {
__le16 beacon_interval;
__le16 capability;
/* SSID, supported rates, FH params, DS params,
- * CF params, IBSS params, TIM (if beacon), RSN */
+ * CF params, IBSS params, TIM (if beacon), RSN
+ */
struct rtllib_info_element info_element[0];
} __packed;
@@ -1332,7 +1285,8 @@ union frameqos {
/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
* only use 8, and then use extended rates for the remaining supported
* rates. Other APs, however, stick all of their supported rates on the
- * main rates information element... */
+ * main rates information element...
+ */
#define MAX_RATES_LENGTH ((u8)12)
#define MAX_RATES_EX_LENGTH ((u8)16)
#define MAX_NETWORK_COUNT 96
@@ -1519,22 +1473,21 @@ struct rtllib_info_element_hdr {
u8 len;
} __packed;
-/*
- * These are the data types that can make up management packets
+/* These are the data types that can make up management packets
*
- u16 auth_algorithm;
- u16 auth_sequence;
- u16 beacon_interval;
- u16 capability;
- u8 current_ap[ETH_ALEN];
- u16 listen_interval;
- struct {
- u16 association_id:14, reserved:2;
- } __packed;
- u32 time_stamp[2];
- u16 reason;
- u16 status;
-*/
+ * u16 auth_algorithm;
+ * u16 auth_sequence;
+ * u16 beacon_interval;
+ * u16 capability;
+ * u8 current_ap[ETH_ALEN];
+ * u16 listen_interval;
+ * struct {
+ * u16 association_id:14, reserved:2;
+ * } __packed;
+ * u32 time_stamp[2];
+ * u16 reason;
+ * u16 status;
+ */
#define RTLLIB_DEFAULT_TX_ESSID "Penguin"
#define RTLLIB_DEFAULT_BASIC_RATE 2
@@ -1670,7 +1623,6 @@ struct rtllib_network {
struct list_head list;
};
-#if 1
enum rtllib_state {
/* the card is not linked at all */
@@ -1708,17 +1660,6 @@ enum rtllib_state {
*/
RTLLIB_LINKED_SCANNING,
};
-#else
-enum rtllib_state {
- RTLLIB_UNINITIALIZED = 0,
- RTLLIB_INITIALIZED,
- RTLLIB_ASSOCIATING,
- RTLLIB_ASSOCIATED,
- RTLLIB_AUTHENTICATING,
- RTLLIB_AUTHENTICATED,
- RTLLIB_SHUTDOWN
-};
-#endif
#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
#define DEFAULT_FTS 2346
@@ -1736,11 +1677,6 @@ enum rtllib_state {
#define RTLLIB_52GHZ_MAX_CHANNEL 165
#define RTLLIB_52GHZ_CHANNELS (RTLLIB_52GHZ_MAX_CHANNEL - \
RTLLIB_52GHZ_MIN_CHANNEL + 1)
-#ifndef eqMacAddr
-#define eqMacAddr(a, b) \
- (((a)[0] == (b)[0] && (a)[1] == (b)[1] && (a)[2] == (b)[2] && \
- (a)[3] == (b)[3] && (a)[4] == (b)[4] && (a)[5] == (b)[5]) ? 1 : 0)
-#endif
struct tx_pending {
int frag;
struct rtllib_txb *txb;
@@ -2149,14 +2085,16 @@ struct rtllib_device {
spinlock_t wpax_suitlist_lock;
int tx_headroom; /* Set to size of any additional room needed at front
- * of allocated Tx SKBs */
+ * of allocated Tx SKBs
+ */
u32 config;
/* WEP and other encryption related settings at the device level */
int open_wep; /* Set to 1 to allow unencrypted frames */
int auth_mode;
int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
- * WEP key changes */
+ * WEP key changes
+ */
/* If the host performs {en,de}cryption, then set to 1 */
int host_encrypt;
@@ -2276,7 +2214,7 @@ struct rtllib_device {
short raw_tx;
/* used if IEEE_SOFTMAC_TX_QUEUE is set */
short queue_stop;
- short scanning_continue ;
+ short scanning_continue;
short proto_started;
short proto_stoppping;
@@ -2426,7 +2364,7 @@ struct rtllib_device {
/* OK this is complementing to data_poll_hard_stop */
void (*data_hard_resume)(struct net_device *dev);
- /* ask to the driver to retune the radio .
+ /* ask to the driver to retune the radio.
* This function can sleep. the driver should ensure
* the radio has been switched before return.
*/
@@ -2520,7 +2458,8 @@ struct rtllib_device {
void (*rtllib_rfkill_poll)(struct net_device *dev);
/* This must be the last item so that it points to the data
- * allocated beyond this structure by alloc_rtllib */
+ * allocated beyond this structure by alloc_rtllib
+ */
u8 priv[0];
};
@@ -2549,7 +2488,8 @@ struct rtllib_device {
/* The ieee802.11 stack will manage the netif queue
* wake/stop for the driver, taking care of 802.11
- * fragmentation. See softmac.c for details. */
+ * fragmentation. See softmac.c for details.
+ */
#define IEEE_SOFTMAC_TX_QUEUE (1<<7)
/* Uses only the softmac_data_hard_start_xmit
@@ -2586,11 +2526,9 @@ static inline int rtllib_is_empty_essid(const char *essid, int essid_len)
static inline int rtllib_is_valid_mode(struct rtllib_device *ieee, int mode)
{
- /*
- * It is possible for both access points and our device to support
+ /* It is possible for both access points and our device to support
* combinations of modes, so as long as there is one valid combination
* of ap/device supported modes, then return success
- *
*/
if ((mode & IEEE_A) &&
(ieee->modulation & RTLLIB_OFDM_MODULATION) &&
@@ -2882,8 +2820,6 @@ extern int rtllib_wx_get_rts(struct rtllib_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra);
#define MAX_RECEIVE_BUFFER_SIZE 9100
-extern void HTDebugHTCapability(u8 *CapIE, u8 *TitleString);
-extern void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString);
void HTSetConnectBwMode(struct rtllib_device *ieee,
enum ht_channel_width Bandwidth,
@@ -2906,11 +2842,10 @@ extern void HT_update_self_and_peer_setting(struct rtllib_device *ieee,
extern u8 HTGetHighestMCSRate(struct rtllib_device *ieee, u8 *pMCSRateSet,
u8 *pMCSFilter);
extern u8 MCS_FILTER_ALL[];
-extern u16 MCS_DATA_RATE[2][2][77] ;
+extern u16 MCS_DATA_RATE[2][2][77];
extern u8 HTCCheck(struct rtllib_device *ieee, u8 *pFrame);
extern void HTResetIOTSetting(struct rt_hi_throughput *pHTInfo);
extern bool IsHTHalfNmodeAPs(struct rtllib_device *ieee);
-extern u16 HTHalfMcsToDataRate(struct rtllib_device *ieee, u8 nMcsRate);
extern u16 HTMcsToDataRate(struct rtllib_device *ieee, u8 nMcsRate);
extern u16 TxCountToDataRate(struct rtllib_device *ieee, u8 nDataRate);
extern int rtllib_rx_ADDBAReq(struct rtllib_device *ieee, struct sk_buff *skb);
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.