aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/rtl8192ee/rtl8192ee/pwrseq.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/rtl8192ee/rtl8192ee/pwrseq.h')
-rw-r--r--drivers/staging/rtl8192ee/rtl8192ee/pwrseq.h355
1 files changed, 0 insertions, 355 deletions
diff --git a/drivers/staging/rtl8192ee/rtl8192ee/pwrseq.h b/drivers/staging/rtl8192ee/rtl8192ee/pwrseq.h
deleted file mode 100644
index 528897213224..000000000000
--- a/drivers/staging/rtl8192ee/rtl8192ee/pwrseq.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2009-2010 Realtek Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * wlanfae <wlanfae@realtek.com>
- * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
- * Hsinchu 300, Taiwan.
- *
- * Larry Finger <Larry.Finger@lwfinger.net>
- *
- *****************************************************************************/
-
-#ifndef __RTL92E_PWRSEQ_H__
-#define __RTL92E_PWRSEQ_H__
-
-#include "pwrseqcmd.h"
-/*
- Check document WM-20110607-Paul-RTL8192E_Power_Architecture-R02.vsd
- There are 6 HW Power States:
- 0: POFF--Power Off
- 1: PDN--Power Down
- 2: CARDEMU--Card Emulation
- 3: ACT--Active Mode
- 4: LPS--Low Power State
- 5: SUS--Suspend
-
- The transision from different states are defined below
- TRANS_CARDEMU_TO_ACT
- TRANS_ACT_TO_CARDEMU
- TRANS_CARDEMU_TO_SUS
- TRANS_SUS_TO_CARDEMU
- TRANS_CARDEMU_TO_PDN
- TRANS_ACT_TO_LPS
- TRANS_LPS_TO_ACT
-
- TRANS_END
- PWR SEQ Version: rtl8192E_PwrSeq_V09.h
-*/
-
-#define RTL8192E_TRANS_CARDEMU_TO_ACT_STEPS 18
-#define RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS 18
-#define RTL8192E_TRANS_CARDEMU_TO_SUS_STEPS 18
-#define RTL8192E_TRANS_SUS_TO_CARDEMU_STEPS 18
-#define RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS 18
-#define RTL8192E_TRANS_PDN_TO_CARDEMU_STEPS 18
-#define RTL8192E_TRANS_ACT_TO_LPS_STEPS 23
-#define RTL8192E_TRANS_LPS_TO_ACT_STEPS 23
-#define RTL8192E_TRANS_END_STEPS 1
-
-
-#define RTL8192E_TRANS_CARDEMU_TO_ACT \
- /* format */ \
- /* comments here */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
- /* disable HWPDN 0x04[15]=0*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), 0}, \
- /* disable SW LPS 0x04[10]=0*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), 0}, \
- /* disable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, (BIT(4)|BIT(3)), 0}, \
- /* wait till 0x04[17] = 1 power ready*/ \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(1), BIT(1)}, \
- /* release WLON reset 0x04[16]=1*/ \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), BIT(0)}, \
- /* polling until return 0*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), BIT(0)}, \
- /**/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(0), 0},
-
-
-#define RTL8192E_TRANS_ACT_TO_CARDEMU \
- /* format */ \
- /* comments here */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
- /*0x1F[7:0] = 0 turn off RF*/ \
- {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0}, \
- /*0x4C[23]=0x4E[7]=0, switch DPDT_SEL_P output from register 0x65[2] */\
- {0x004E, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), 0}, \
- /*0x04[9] = 1 turn off MAC by HW state machine*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), BIT(1)}, \
- /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(1), 0},
-
-
-#define RTL8192E_TRANS_CARDEMU_TO_SUS \
- /* format */ \
- /* comments here */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
- /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(4) | BIT(3), (BIT(4) | BIT(3))},\
- /*0x04[12:11] = 2b'01 enable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \
- /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) | BIT(4)},\
- /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), BIT(0)}, \
- /*wait power state to suspend*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), 0},
-
-
-#define RTL8192E_TRANS_SUS_TO_CARDEMU \
- /* format */ \
- /* comments here */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
- /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), 0}, \
- /*wait power state to suspend*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), BIT(1)}, \
- /*0x04[12:11] = 2b'01enable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(3) | BIT(4), 0},
-
-
-#define RTL8192E_TRANS_CARDEMU_TO_CARDDIS \
- /* format */ \
- /* comments here */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
- /*0x07=0x20 , SOP option to disable BG/MB*/ \
- {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x20}, \
- /*Unlock small LDO Register*/ \
- {0x00CC, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), BIT(2)}, \
- /*Disable small LDO*/ \
- {0x0011, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), 0}, \
- /*0x04[12:11] = 2b'01 enable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
- PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK,PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \
- /*0x04[10] = 1, enable SW LPS*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), BIT(2)}, \
- /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), BIT(0)}, \
- /*wait power state to suspend*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), 0},
-
-
-#define RTL8192E_TRANS_CARDDIS_TO_CARDEMU \
- /* format */ \
- /* comments here */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
- /*Set SDIO suspend local register*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), 0}, \
- /*wait power state to suspend*/ \
- {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), BIT(1)}, \
- /*Enable small LDO*/ \
- {0x0011, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), BIT(0)}, \
- /*Lock small LDO Register*/ \
- {0x00CC, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), 0}, \
- /*0x04[12:11] = 2b'01enable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(3) | BIT(4), 0},
-
-
-#define RTL8192E_TRANS_CARDEMU_TO_PDN \
- /* format */ \
- /* comments here */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
- /* 0x04[16] = 0*/ \
- {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), 0}, \
- /* 0x04[15] = 1*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), BIT(7)},
-
-
-#define RTL8192E_TRANS_PDN_TO_CARDEMU \
- /* format */ \
- /* comments here */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
- /* 0x04[15] = 0*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), 0},
-
-
-#define RTL8192E_TRANS_ACT_TO_LPS \
- /* format */ \
- /* comments here */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
- /*PCIe DMA stop*/ \
- {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF}, \
- /*Tx Pause*/ \
- {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF}, \
- /*Should be zero if no packet is transmitting*/ \
- {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0}, \
- /*Should be zero if no packet is transmitting*/ \
- {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0}, \
- /*Should be zero if no packet is transmitting*/ \
- {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0}, \
- /*Should be zero if no packet is transmitting*/ \
- {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0}, \
- /*CCK and OFDM are disabled,and clock are gated*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), 0}, \
- /*Delay 1us*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US}, \
- /*Whole BB is reset*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), 0}, \
- /*Reset MAC TRX*/ \
- {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x03}, \
- /*check if removed later*/ \
- {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), 0}, \
- /*When driver enter Sus/ Disable, enable LOP for BT*/ \
- {0x0093, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x00}, \
- /*Respond TxOK to scheduler*/ \
- {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(5), BIT(5)},
-
-
-#define RTL8192E_TRANS_LPS_TO_ACT \
- /* format */ \
- /* comments here */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
- /*SDIO RPWM, For Repeatly In and out, Taggle bit should be changed*/\
- {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO , PWR_CMD_WRITE, 0xFF, 0x84}, \
- /*USB RPWM*/ \
- {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x84}, \
- /*PCIe RPWM*/ \
- {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x84}, \
- /*Delay*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, \
- /*0x08[4] = 0 switch TSF to 40M*/ \
- {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(4), 0}, \
- /*Polling 0x109[7]=0 TSF in 40M*/ \
- {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(7), 0}, \
- /*0x101[1] = 1*/ \
- {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), BIT(1)}, \
- /*0x100[7:0] = 0xFF enable WMAC TRX*/ \
- {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF}, \
- /* 0x02[1:0] = 2b'11 enable BB macro*/ \
- {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)},\
- /*0x522 = 0*/ \
- {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0}, \
- /*Clear ISR*/ \
- {0x013D, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF},
-
-
-#define RTL8192E_TRANS_END \
- /* format */ \
- /* comments here */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
- {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- 0, PWR_CMD_END, 0, 0},
-
-extern struct wlan_pwr_cfg rtl8192E_power_on_flow
- [RTL8192E_TRANS_CARDEMU_TO_ACT_STEPS +
- RTL8192E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8192E_radio_off_flow
- [RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8192E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8192E_card_disable_flow
- [RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8192E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8192E_card_enable_flow
- [RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8192E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8192E_suspend_flow
- [RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8192E_TRANS_CARDEMU_TO_SUS_STEPS +
- RTL8192E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8192E_resume_flow
- [RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8192E_TRANS_CARDEMU_TO_SUS_STEPS +
- RTL8192E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8192E_hwpdn_flow
- [RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8192E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8192E_enter_lps_flow
- [RTL8192E_TRANS_ACT_TO_LPS_STEPS +
- RTL8192E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8192E_leave_lps_flow
- [RTL8192E_TRANS_LPS_TO_ACT_STEPS +
- RTL8192E_TRANS_END_STEPS];
-
-
-/* RTL8192EE Power Configuration CMDs for PCIe interface */
-#define Rtl8192E_NIC_PWR_ON_FLOW rtl8192E_power_on_flow
-#define Rtl8192E_NIC_RF_OFF_FLOW rtl8192E_radio_off_flow
-#define Rtl8192E_NIC_DISABLE_FLOW rtl8192E_card_disable_flow
-#define Rtl8192E_NIC_ENABLE_FLOW rtl8192E_card_enable_flow
-#define Rtl8192E_NIC_SUSPEND_FLOW rtl8192E_suspend_flow
-#define Rtl8192E_NIC_RESUME_FLOW rtl8192E_resume_flow
-#define Rtl8192E_NIC_PDN_FLOW rtl8192E_hwpdn_flow
-#define Rtl8192E_NIC_LPS_ENTER_FLOW rtl8192E_enter_lps_flow
-#define Rtl8192E_NIC_LPS_LEAVE_FLOW rtl8192E_leave_lps_flow
-#endif
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.