diff options
Diffstat (limited to 'drivers/staging/rtl8192u/r819xU_HTType.h')
| -rw-r--r-- | drivers/staging/rtl8192u/r819xU_HTType.h | 411 |
1 files changed, 200 insertions, 211 deletions
diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h index 19a7bdd1973a..2cbb8e6584f8 100644 --- a/drivers/staging/rtl8192u/r819xU_HTType.h +++ b/drivers/staging/rtl8192u/r819xU_HTType.h @@ -2,41 +2,36 @@ #define _R819XU_HTTYPE_H_ -//------------------------------------------------------------ -// The HT Capability element is present in beacons, association request, -// reassociation request and probe response frames -//------------------------------------------------------------ - -// -// Operation mode value -// +/*---------------------------------------------------------------------- + * The HT Capability element is present in beacons, association request, + * reassociation request and probe response frames + *----------------------------------------------------------------------*/ + +/* Operation mode value */ #define HT_OPMODE_NO_PROTECT 0 #define HT_OPMODE_OPTIONAL 1 -#define HT_OPMODE_40MHZ_PROTECT 2 +#define HT_OPMODE_40MHZ_PROTECT 2 #define HT_OPMODE_MIXED 3 -// -// MIMO Power Save Settings -// -#define MIMO_PS_STATIC 0 +/* MIMO Power Save Settings */ +#define MIMO_PS_STATIC 0 #define MIMO_PS_DYNAMIC 1 #define MIMO_PS_NOLIMIT 3 -// -// There should be 128 bits to cover all of the MCS rates. However, since -// 8190 does not support too much rates, one integer is quite enough. -// +/* There should be 128 bits to cover all of the MCS rates. However, since + * 8190 does not support too much rates, one integer is quite enough. */ -#define sHTCLng 4 +#define sHTCLng 4 -#define HT_SUPPORTED_MCS_1SS_BITMAP 0x000000ff -#define HT_SUPPORTED_MCS_2SS_BITMAP 0x0000ff00 -#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP +#define HT_SUPPORTED_MCS_1SS_BITMAP 0x000000ff +#define HT_SUPPORTED_MCS_2SS_BITMAP 0x0000ff00 +#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP \ + (HT_MCS_1SS_BITMAP | HT_MCS_1SS_2SS_BITMAP) -typedef enum _HT_MCS_RATE{ +typedef enum _HT_MCS_RATE { HT_MCS0 = 0x00000001, HT_MCS1 = 0x00000002, HT_MCS2 = 0x00000004, @@ -47,71 +42,67 @@ typedef enum _HT_MCS_RATE{ HT_MCS7 = 0x00000080, HT_MCS8 = 0x00000100, HT_MCS9 = 0x00000200, - HT_MCS10 = 0x00000400, - HT_MCS11 = 0x00000800, - HT_MCS12 = 0x00001000, - HT_MCS13 = 0x00002000, - HT_MCS14 = 0x00004000, - HT_MCS15 = 0x00008000, - // Do not define MCS32 here although 8190 support MCS32 -}HT_MCS_RATE,*PHT_MCS_RATE; - -// -// Represent Channel Width in HT Capabilities -// -typedef enum _HT_CHANNEL_WIDTH{ - HT_CHANNEL_WIDTH_20 = 0, + HT_MCS10 = 0x00000400, + HT_MCS11 = 0x00000800, + HT_MCS12 = 0x00001000, + HT_MCS13 = 0x00002000, + HT_MCS14 = 0x00004000, + HT_MCS15 = 0x00008000, + /* Do not define MCS32 here although 8190 support MCS32 */ +} HT_MCS_RATE, *PHT_MCS_RATE; + +/* Represent Channel Width in HT Capabilities */ +typedef enum _HT_CHANNEL_WIDTH { + HT_CHANNEL_WIDTH_20 = 0, HT_CHANNEL_WIDTH_20_40 = 1, -}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH; +} HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH; -// -// Represent Extension Channel Offset in HT Capabilities -// This is available only in 40Mhz mode. -// -typedef enum _HT_EXTCHNL_OFFSET{ +/* Represent Extension Channel Offset in HT Capabilities + * This is available only in 40Mhz mode. */ +typedef enum _HT_EXTCHNL_OFFSET { HT_EXTCHNL_OFFSET_NO_EXT = 0, - HT_EXTCHNL_OFFSET_UPPER = 1, + HT_EXTCHNL_OFFSET_UPPER = 1, HT_EXTCHNL_OFFSET_NO_DEF = 2, - HT_EXTCHNL_OFFSET_LOWER = 3, -}HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET; - -typedef enum _CHNLOP{ - CHNLOP_NONE = 0, // No Action now - CHNLOP_SCAN = 1, // Scan in progress - CHNLOP_SWBW = 2, // Bandwidth switching in progress - CHNLOP_SWCHNL = 3, // Software Channel switching in progress + HT_EXTCHNL_OFFSET_LOWER = 3, +} HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET; + +typedef enum _CHNLOP { + CHNLOP_NONE = 0, /* No Action now */ + CHNLOP_SCAN = 1, /* Scan in progress */ + CHNLOP_SWBW = 2, /* Bandwidth switching in progress */ + CHNLOP_SWCHNL = 3, /* Software Channel switching in progress */ } CHNLOP, *PCHNLOP; -// Determine if the Channel Operation is in progress +/* Determine if the Channel Operation is in progress */ #define CHHLOP_IN_PROGRESS(_pHTInfo) \ - ((_pHTInfo)->ChnlOp > CHNLOP_NONE) ? TRUE : FALSE + (((_pHTInfo)->ChnlOp > CHNLOP_NONE) ? TRUE : FALSE) -typedef enum _HT_ACTION{ +typedef enum _HT_ACTION { ACT_RECOMMAND_WIDTH = 0, ACT_MIMO_PWR_SAVE = 1, - ACT_PSMP = 2, + ACT_PSMP = 2, ACT_SET_PCO_PHASE = 3, - ACT_MIMO_CHL_MEASURE = 4, - ACT_RECIPROCITY_CORRECT = 5, + ACT_MIMO_CHL_MEASURE = 4, + ACT_RECIPROCITY_CORRECT = 5, ACT_MIMO_CSI_MATRICS = 6, - ACT_MIMO_NOCOMPR_STEER = 7, + ACT_MIMO_NOCOMPR_STEER = 7, ACT_MIMO_COMPR_STEER = 8, ACT_ANTENNA_SELECT = 9, } HT_ACTION, *PHT_ACTION; -/* 2007/06/07 MH Define sub-carrier mode for 40MHZ. */ -typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier{ +/* Define sub-carrier mode for 40MHZ. */ +typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier { SC_MODE_DUPLICATE = 0, - SC_MODE_LOWER = 1, - SC_MODE_UPPER = 2, + SC_MODE_LOWER = 1, + SC_MODE_UPPER = 2, SC_MODE_FULL40MHZ = 3, -}HT_BW40_SC_E; +} HT_BW40_SC_E; -typedef struct _HT_CAPABILITY_ELE{ +typedef struct _HT_CAPABILITY_ELE { - //HT capability info + /* HT capability info */ u8 AdvCoding:1; u8 ChlWidth:1; u8 MimoPwrSave:2; @@ -127,32 +118,32 @@ typedef struct _HT_CAPABILITY_ELE{ u8 Rsvd1:1; u8 LSigTxopProtect:1; - //MAC HT parameters info + /* MAC HT parameters info */ u8 MaxRxAMPDUFactor:2; u8 MPDUDensity:3; u8 Rsvd2:3; - //Supported MCS set + /* Supported MCS set */ u8 MCS[16]; - //Extended HT Capability Info + /* Extended HT Capability Info */ u16 ExtHTCapInfo; - //TXBF Capabilities + /* TXBF Capabilities */ u8 TxBFCap[4]; - //Antenna Selection Capabilities + /* Antenna Selection Capabilities */ u8 ASCap; -}__attribute__((packed)) HT_CAPABILITY_ELE, *PHT_CAPABILITY_ELE; +} __packed HT_CAPABILITY_ELE, *PHT_CAPABILITY_ELE; -//------------------------------------------------------------ -// The HT Information element is present in beacons -// Only AP is required to include this element -//------------------------------------------------------------ +/*------------------------------------------------------------ + * The HT Information element is present in beacons + * Only AP is required to include this element + *------------------------------------------------------------*/ -typedef struct _HT_INFORMATION_ELE{ +typedef struct _HT_INFORMATION_ELE { u8 ControlChl; u8 ExtChlOffset:2; @@ -177,146 +168,146 @@ typedef struct _HT_INFORMATION_ELE{ u8 Rsvd4:4; u8 BasicMSC[16]; -}__attribute__((packed)) HT_INFORMATION_ELE, *PHT_INFORMATION_ELE; +} __packed HT_INFORMATION_ELE, *PHT_INFORMATION_ELE; -// -// MIMO Power Save control field. -// This is appear in MIMO Power Save Action Frame -// -typedef struct _MIMOPS_CTRL{ +/* MIMO Power Save control field. + * This is appear in MIMO Power Save Action Frame */ +typedef struct _MIMOPS_CTRL { u8 MimoPsEnable:1; u8 MimoPsMode:1; u8 Reserved:6; } MIMOPS_CTRL, *PMIMOPS_CTRL; -typedef enum _HT_SPEC_VER{ +typedef enum _HT_SPEC_VER { HT_SPEC_VER_IEEE = 0, HT_SPEC_VER_EWC = 1, -}HT_SPEC_VER, *PHT_SPEC_VER; +} HT_SPEC_VER, *PHT_SPEC_VER; -typedef enum _HT_AGGRE_MODE_E{ +typedef enum _HT_AGGRE_MODE_E { HT_AGG_AUTO = 0, HT_AGG_FORCE_ENABLE = 1, HT_AGG_FORCE_DISABLE = 2, -}HT_AGGRE_MODE_E, *PHT_AGGRE_MODE_E; - -//------------------------------------------------------------ -// The Data structure is used to keep HT related variables when card is -// configured as non-AP STA mode. **Note** Current_xxx should be set -// to default value in HTInitializeHTInfo() -//------------------------------------------------------------ - -typedef struct _RT_HIGH_THROUGHPUT{ -// DECLARE_RT_OBJECT(_RT_HIGH_THROUGHPUT); - u8 bEnableHT; - u8 bCurrentHTSupport; - - u8 bRegBW40MHz; // Tx 40MHz channel capability - u8 bCurBW40MHz; // Tx 40MHz channel capability - - u8 bRegShortGI40MHz; // Tx Short GI for 40Mhz - u8 bCurShortGI40MHz; // Tx Short GI for 40MHz - - u8 bRegShortGI20MHz; // Tx Short GI for 20MHz - u8 bCurShortGI20MHz; // Tx Short GI for 20MHz - - u8 bRegSuppCCK; // Tx CCK rate capability - u8 bCurSuppCCK; // Tx CCK rate capability - - // 802.11n spec version for "peer" - HT_SPEC_VER ePeerHTSpecVer; - +} HT_AGGRE_MODE_E, *PHT_AGGRE_MODE_E; - // HT related information for "Self" - HT_CAPABILITY_ELE SelfHTCap; // This is HT cap element sent to peer STA, which also indicate HT Rx capabilities. - HT_INFORMATION_ELE SelfHTInfo; // This is HT info element sent to peer STA, which also indicate HT Rx capabilities. +/*---------------------------------------------------------------------------- + * The Data structure is used to keep HT related variables when card is + * configured as non-AP STA mode. + * **Note** Current_xxx should be set to default value in HTInitializeHTInfo() + *----------------------------------------------------------------------------*/ - // HT related information for "Peer" - u8 PeerHTCapBuf[32]; - u8 PeerHTInfoBuf[32]; - - - // A-MSDU related - u8 bAMSDU_Support; // This indicates Tx A-MSDU capability - u16 nAMSDU_MaxSize; // This indicates Tx A-MSDU capability - u8 bCurrent_AMSDU_Support; // This indicates Tx A-MSDU capability - u16 nCurrent_AMSDU_MaxSize; // This indicates Tx A-MSDU capability - - - // AMPDU related <2006.08.10 Emily> - u8 bAMPDUEnable; // This indicate Tx A-MPDU capability - u8 bCurrentAMPDUEnable; // This indicate Tx A-MPDU capability - u8 AMPDU_Factor; // This indicate Tx A-MPDU capability - u8 CurrentAMPDUFactor; // This indicate Tx A-MPDU capability - u8 MPDU_Density; // This indicate Tx A-MPDU capability - u8 CurrentMPDUDensity; // This indicate Tx A-MPDU capability +typedef struct _RT_HIGH_THROUGHPUT { + u8 bEnableHT; + u8 bCurrentHTSupport; + /* Tx 40MHz channel capability */ + u8 bRegBW40MHz; + u8 bCurBW40MHz; + /* Tx Short GI for 40Mhz */ + u8 bRegShortGI40MHz; + u8 bCurShortGI40MHz; + /* Tx Short GI for 20MHz */ + u8 bRegShortGI20MHz; + u8 bCurShortGI20MHz; + /* Tx CCK rate capability */ + u8 bRegSuppCCK; + u8 bCurSuppCCK; + + /* 802.11n spec version for "peer" */ + HT_SPEC_VER ePeerHTSpecVer; + + + /* HT related information for "Self" */ + /* This is HT cap element sent to peer STA, which also indicate + * HT Rx capabilities. */ + HT_CAPABILITY_ELE SelfHTCap; + HT_INFORMATION_ELE SelfHTInfo; + + /* HT related information for "Peer" */ + u8 PeerHTCapBuf[32]; + u8 PeerHTInfoBuf[32]; + + + /* A-MSDU related */ + /* This indicates Tx A-MSDU capability */ + u8 bAMSDU_Support; + u16 nAMSDU_MaxSize; + u8 bCurrent_AMSDU_Support; + u16 nCurrent_AMSDU_MaxSize; + + + /* A-MPDU related */ + /* This indicate Tx A-MPDU capability */ + u8 bAMPDUEnable; + u8 bCurrentAMPDUEnable; + u8 AMPDU_Factor; + u8 CurrentAMPDUFactor; + u8 MPDU_Density; + u8 CurrentMPDUDensity; - // Forced A-MPDU enable - HT_AGGRE_MODE_E ForcedAMPDUMode; - u8 ForcedAMPDUFactor; - u8 ForcedMPDUDensity; + /* Forced A-MPDU enable */ + HT_AGGRE_MODE_E ForcedAMPDUMode; + u8 ForcedAMPDUFactor; + u8 ForcedMPDUDensity; - // Forced A-MSDU enable - HT_AGGRE_MODE_E ForcedAMSDUMode; - u16 ForcedAMSDUMaxSize; + /* Forced A-MSDU enable */ + HT_AGGRE_MODE_E ForcedAMSDUMode; + u16 ForcedAMSDUMaxSize; - u8 bForcedShortGI; + u8 bForcedShortGI; - u8 CurrentOpMode; + u8 CurrentOpMode; - // MIMO PS related - u8 SelfMimoPs; - u8 PeerMimoPs; + /* MIMO PS related */ + u8 SelfMimoPs; + u8 PeerMimoPs; - // 40MHz Channel Offset settings. + /* 40MHz Channel Offset settings. */ HT_EXTCHNL_OFFSET CurSTAExtChnlOffset; - u8 bCurTxBW40MHz; // If we use 40 MHz to Tx - u8 PeerBandwidth; - - // For Bandwidth Switching - u8 bSwBwInProgress; - CHNLOP ChnlOp; // software switching channel in progress. By Bruce, 2008-02-15. - u8 SwBwStep; - //RT_TIMER SwBwTimer; - struct timer_list SwBwTimer; - - // For Realtek proprietary A-MPDU factor for aggregation - u8 bRegRT2RTAggregation; - u8 bCurrentRT2RTAggregation; - u8 bCurrentRT2RTLongSlotTime; - u8 szRT2RTAggBuffer[10]; - - // Rx Reorder control - u8 bRegRxReorderEnable; - u8 bCurRxReorderEnable; - u8 RxReorderWinSize; - u8 RxReorderPendingTime; - u16 RxReorderDropCounter; + u8 bCurTxBW40MHz; /* If we use 40 MHz to Tx */ + u8 PeerBandwidth; + + /* For Bandwidth Switching */ + u8 bSwBwInProgress; + CHNLOP ChnlOp; /* sw switching channel in progress. */ + u8 SwBwStep; + struct timer_list SwBwTimer; + + /* For Realtek proprietary A-MPDU factor for aggregation */ + u8 bRegRT2RTAggregation; + u8 bCurrentRT2RTAggregation; + u8 bCurrentRT2RTLongSlotTime; + u8 szRT2RTAggBuffer[10]; + + /* Rx Reorder control */ + u8 bRegRxReorderEnable; + u8 bCurRxReorderEnable; + u8 RxReorderWinSize; + u8 RxReorderPendingTime; + u16 RxReorderDropCounter; #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE - u8 UsbTxAggrNum; + u8 UsbTxAggrNum; #endif #ifdef USB_RX_AGGREGATION_SUPPORT - u8 UsbRxFwAggrEn; - u8 UsbRxFwAggrPageNum; - u8 UsbRxFwAggrPacketNum; - u8 UsbRxFwAggrTimeout; + u8 UsbRxFwAggrEn; + u8 UsbRxFwAggrPageNum; + u8 UsbRxFwAggrPacketNum; + u8 UsbRxFwAggrTimeout; #endif - // Add for Broadcom(Linksys) IOT. Joseph - u8 bIsPeerBcm; + /* Add for Broadcom(Linksys) IOT. */ + u8 bIsPeerBcm; - // For IOT issue. - u32 IOTAction; -}RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT; + /* For IOT issue. */ + u32 IOTAction; +} RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT; -//------------------------------------------------------------ -// The Data structure is used to keep HT related variable for "each Sta" -// when card is configured as "AP mode" -//------------------------------------------------------------ +/*---------------------------------------------------------------------- + * The Data structure is used to keep HT related variable for "each Sta" + * when card is configured as "AP mode" + *----------------------------------------------------------------------*/ -typedef struct _RT_HTINFO_STA_ENTRY{ +typedef struct _RT_HTINFO_STA_ENTRY { u8 bEnableHT; u8 bSupportCck; @@ -335,56 +326,54 @@ typedef struct _RT_HTINFO_STA_ENTRY{ u8 McsRateSet[16]; -}RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY; +} RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY; -//------------------------------------------------------------ -// The Data structure is used to keep HT related variable for "each AP" -// when card is configured as "STA mode" -//------------------------------------------------------------ +/*--------------------------------------------------------------------- + * The Data structure is used to keep HT related variable for "each AP" + * when card is configured as "STA mode" + *---------------------------------------------------------------------*/ -typedef struct _BSS_HT{ +typedef struct _BSS_HT { u8 bdSupportHT; - // HT related elements - u8 bdHTCapBuf[32]; - u16 bdHTCapLen; - u8 bdHTInfoBuf[32]; - u16 bdHTInfoLen; + /* HT related elements */ + u8 bdHTCapBuf[32]; + u16 bdHTCapLen; + u8 bdHTInfoBuf[32]; + u16 bdHTInfoLen; - HT_SPEC_VER bdHTSpecVer; - //HT_CAPABILITY_ELE bdHTCapEle; - //HT_INFORMATION_ELE bdHTInfoEle; + HT_SPEC_VER bdHTSpecVer; - u8 bdRT2RTAggregation; - u8 bdRT2RTLongSlotTime; -}BSS_HT, *PBSS_HT; + u8 bdRT2RTAggregation; + u8 bdRT2RTLongSlotTime; +} BSS_HT, *PBSS_HT; -typedef struct _MIMO_RSSI{ +typedef struct _MIMO_RSSI { u32 EnableAntenna; u32 AntennaA; u32 AntennaB; u32 AntennaC; u32 AntennaD; u32 Average; -}MIMO_RSSI, *PMIMO_RSSI; +} MIMO_RSSI, *PMIMO_RSSI; -typedef struct _MIMO_EVM{ +typedef struct _MIMO_EVM { u32 EVM1; - u32 EVM2; -}MIMO_EVM, *PMIMO_EVM; + u32 EVM2; +} MIMO_EVM, *PMIMO_EVM; -typedef struct _FALSE_ALARM_STATISTICS{ +typedef struct _FALSE_ALARM_STATISTICS { u32 Cnt_Parity_Fail; - u32 Cnt_Rate_Illegal; + u32 Cnt_Rate_Illegal; u32 Cnt_Crc8_fail; u32 Cnt_all; -}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS; +} FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS; -#endif //__INC_HTTYPE_H +#endif |