1 files changed, 2 insertions, 81 deletions

diff --git a/drivers/staging/rts5139/rts51x.c b/drivers/staging/rts5139/rts51x.c
index 2b9f785954df..c3fe7dda1f4e 100644
--- a/drivers/staging/rts5139/rts51x.c
+++ b/drivers/staging/rts5139/rts51x.c
@@ -56,12 +56,6 @@ MODULE_DESCRIPTION(RTS51X_DESC);
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRIVER_VERSION);
 
-#ifdef SCSI_SCAN_DELAY
-static unsigned int delay_use = 5;
-module_param(delay_use, uint, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
-#endif
-
 static int auto_delink_en;
 module_param(auto_delink_en, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(auto_delink_en, "enable auto delink");
@@ -114,7 +108,7 @@ static inline void usb_autopm_disable(struct usb_interface *intf)
 	usb_autopm_get_interface(intf);
 }
 
-void rts51x_try_to_enter_ss(struct rts51x_chip *chip)
+static void rts51x_try_to_enter_ss(struct rts51x_chip *chip)
 {
 	RTS51X_DEBUGP("Ready to enter SS state\n");
 	usb_autopm_enable(chip->usb->pusb_intf);
@@ -207,7 +201,7 @@ int rts51x_reset_resume(struct usb_interface *iface)
 
 #else /* CONFIG_PM */
 
-void rts51x_try_to_enter_ss(struct rts51x_chip *chip)
+static void rts51x_try_to_enter_ss(struct rts51x_chip *chip)
 {
 }
 
@@ -364,11 +358,6 @@ static int rts51x_polling_thread(void *__chip)
 {
 	struct rts51x_chip *chip = (struct rts51x_chip *)__chip;
 
-#ifdef SCSI_SCAN_DELAY
-	/* Wait until SCSI scan finished */
-	wait_timeout((delay_use + 5) * HZ);
-#endif
-
 	for (;;) {
 		wait_timeout(POLLING_INTERVAL);
 
@@ -432,38 +421,6 @@ static int rts51x_polling_thread(void *__chip)
 	return 0;
 }
 
-#ifdef SCSI_SCAN_DELAY
-/* Thread to carry out delayed SCSI-device scanning */
-static int rts51x_scan_thread(void *__chip)
-{
-	struct rts51x_chip *chip = (struct rts51x_chip *)__chip;
-
-	printk(KERN_DEBUG
-	       "rts51x: device found at %d\n", chip->usb->pusb_dev->devnum);
-
-	set_freezable();
-	/* Wait for the timeout to expire or for a disconnect */
-	if (delay_use > 0) {
-		printk(KERN_DEBUG "rts51x: waiting for device "
-		       "to settle before scanning\n");
-		wait_event_freezable_timeout(chip->usb->delay_wait,
-					     test_bit(FLIDX_DONT_SCAN,
-						      &chip->usb->dflags),
-					     delay_use * HZ);
-	}
-
-	/* If the device is still connected, perform the scanning */
-	if (!test_bit(FLIDX_DONT_SCAN, &chip->usb->dflags)) {
-		scsi_scan_host(rts51x_to_host(chip));
-		printk(KERN_DEBUG "rts51x: device scan complete\n");
-
-		/* Should we unbind if no devices were detected? */
-	}
-
-	complete_and_exit(&chip->usb->scanning_done, 0);
-}
-#endif
-
 /* Associate our private data with the USB device */
 static int associate_dev(struct rts51x_chip *chip, struct usb_interface *intf)
 {
@@ -521,7 +478,6 @@ static void rts51x_init_options(struct rts51x_chip *chip)
 {
 	struct rts51x_option *option = &(chip->option);
 
-	option->led_blink_speed = 7;
 	option->mspro_formatter_enable = 1;
 
 	option->fpga_sd_sdr104_clk = CLK_100;
@@ -549,7 +505,6 @@ static void rts51x_init_options(struct rts51x_chip *chip)
 
 	option->ss_en = ss_en;
 	option->ss_delay = ss_delay;
-	option->needs_remote_wakeup = needs_remote_wakeup;
 
 	option->auto_delink_en = auto_delink_en;
 
@@ -561,10 +516,7 @@ static void rts51x_init_options(struct rts51x_chip *chip)
 	option->rts5129_D3318_off_enable = 0;
 	option->sd20_pad_drive = 0;
 	option->reset_or_rw_fail_set_pad_drive = 1;
-	option->rcc_fail_flag = 0;
-	option->rcc_bug_fix_en = 1;
 	option->debounce_num = 2;
-	option->polling_time = 100;
 	option->led_toggle_interval = 6;
 	option->xd_rwn_step = 0;
 	option->sd_send_status_en = 0;
@@ -737,15 +689,6 @@ static void quiesce_and_remove_host(struct rts51x_chip *chip)
 	if (rts51x->pusb_dev->state == USB_STATE_NOTATTACHED)
 		set_bit(FLIDX_DISCONNECTING, &rts51x->dflags);
 
-#ifdef SCSI_SCAN_DELAY
-	/* Prevent SCSI-scanning (if it hasn't started yet)
-	 * and wait for the SCSI-scanning thread to stop.
-	 */
-	set_bit(FLIDX_DONT_SCAN, &rts51x->dflags);
-	wake_up(&rts51x->delay_wait);
-	wait_for_completion(&rts51x->scanning_done);
-#endif
-
 	/* Removing the host will perform an orderly shutdown: caches
 	 * synchronized, disks spun down, etc.
 	 */
@@ -757,9 +700,6 @@ static void quiesce_and_remove_host(struct rts51x_chip *chip)
 	scsi_lock(host);
 	set_bit(FLIDX_DISCONNECTING, &rts51x->dflags);
 	scsi_unlock(host);
-#ifdef SCSI_SCAN_DELAY
-	wake_up(&rts51x->delay_wait);
-#endif
 }
 
 /* Second stage of disconnect processing: deallocate all resources */
@@ -818,10 +758,6 @@ static int rts51x_probe(struct usb_interface *intf,
 	init_completion(&rts51x->control_exit);
 	init_completion(&rts51x->polling_exit);
 	init_completion(&(rts51x->notify));
-#ifdef SCSI_SCAN_DELAY
-	init_waitqueue_head(&rts51x->delay_wait);
-	init_completion(&rts51x->scanning_done);
-#endif
 
 	chip->usb = rts51x;
 
@@ -855,22 +791,7 @@ static int rts51x_probe(struct usb_interface *intf,
 		printk(KERN_WARNING RTS51X_TIP "Unable to add the scsi host\n");
 		goto BadDevice;
 	}
-#ifdef SCSI_SCAN_DELAY
-	/* Start up the thread for delayed SCSI-device scanning */
-	th = kthread_create(rts51x_scan_thread, chip, RTS51X_SCAN_THREAD);
-	if (IS_ERR(th)) {
-		printk(KERN_WARNING RTS51X_TIP
-		       "Unable to start the device-scanning thread\n");
-		complete(&rts51x->scanning_done);
-		quiesce_and_remove_host(chip);
-		result = PTR_ERR(th);
-		goto BadDevice;
-	}
-
-	wake_up_process(th);
-#else
 	scsi_scan_host(rts51x_to_host(chip));
-#endif
 
 	/* Start up our polling thread */
 	th = kthread_run(rts51x_polling_thread, chip, RTS51X_POLLING_THREAD);