diff options
Diffstat (limited to 'drivers/staging/sep/sep_driver_config.h')
-rw-r--r-- | drivers/staging/sep/sep_driver_config.h | 225 |
1 files changed, 0 insertions, 225 deletions
diff --git a/drivers/staging/sep/sep_driver_config.h b/drivers/staging/sep/sep_driver_config.h deleted file mode 100644 index 6008fe5eca09..000000000000 --- a/drivers/staging/sep/sep_driver_config.h +++ /dev/null @@ -1,225 +0,0 @@ -/* - * - * sep_driver_config.h - Security Processor Driver configuration - * - * Copyright(c) 2009 Intel Corporation. All rights reserved. - * Copyright(c) 2009 Discretix. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * CONTACTS: - * - * Mark Allyn mark.a.allyn@intel.com - * - * CHANGES: - * - * 2009.06.26 Initial publish - * - */ - -#ifndef __SEP_DRIVER_CONFIG_H__ -#define __SEP_DRIVER_CONFIG_H__ - - -/*-------------------------------------- - DRIVER CONFIGURATION FLAGS - -------------------------------------*/ - -/* if flag is on , then the driver is running in polling and - not interrupt mode */ -#define SEP_DRIVER_POLLING_MODE 1 - -/* flag which defines if the shared area address should be - reconfiged (send to SEP anew) during init of the driver */ -#define SEP_DRIVER_RECONFIG_MESSAGE_AREA 0 - -/* the mode for running on the ARM1172 Evaluation platform (flag is 1) */ -#define SEP_DRIVER_ARM_DEBUG_MODE 0 - -/*------------------------------------------- - INTERNAL DATA CONFIGURATION - -------------------------------------------*/ - -/* flag for the input array */ -#define SEP_DRIVER_IN_FLAG 0 - -/* flag for output array */ -#define SEP_DRIVER_OUT_FLAG 1 - -/* maximum number of entries in one LLI tables */ -#define SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP 8 - - -/*-------------------------------------------------------- - SHARED AREA memory total size is 36K - it is divided is following: - - SHARED_MESSAGE_AREA 8K } - } - STATIC_POOL_AREA 4K } MAPPED AREA ( 24 K) - } - DATA_POOL_AREA 12K } - - SYNCHRONIC_DMA_TABLES_AREA 5K - - FLOW_DMA_TABLES_AREA 4K - - SYSTEM_MEMORY_AREA 3k - - SYSTEM_MEMORY total size is 3k - it is divided as following: - - TIME_MEMORY_AREA 8B ------------------------------------------------------------*/ - - - -/* - the maximum length of the message - the rest of the message shared - area will be dedicated to the dma lli tables -*/ -#define SEP_DRIVER_MAX_MESSAGE_SIZE_IN_BYTES (8 * 1024) - -/* the size of the message shared area in pages */ -#define SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES (8 * 1024) - -/* the size of the data pool static area in pages */ -#define SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES (4 * 1024) - -/* the size of the data pool shared area size in pages */ -#define SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES (12 * 1024) - -/* the size of the message shared area in pages */ -#define SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_SIZE_IN_BYTES (1024 * 5) - - -/* the size of the data pool shared area size in pages */ -#define SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES (1024 * 4) - -/* system data (time, caller id etc') pool */ -#define SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES 100 - - -/* area size that is mapped - we map the MESSAGE AREA, STATIC POOL and - DATA POOL areas. area must be module 4k */ -#define SEP_DRIVER_MMMAP_AREA_SIZE (1024 * 24) - - -/*----------------------------------------------- - offsets of the areas starting from the shared area start address -*/ - -/* message area offset */ -#define SEP_DRIVER_MESSAGE_AREA_OFFSET_IN_BYTES 0 - -/* static pool area offset */ -#define SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES \ - (SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES) - -/* data pool area offset */ -#define SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES \ - (SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES + \ - SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES) - -/* synhronic dma tables area offset */ -#define SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES \ - (SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + \ - SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) - -/* sep driver flow dma tables area offset */ -#define SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES \ - (SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES + \ - SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_SIZE_IN_BYTES) - -/* system memory offset in bytes */ -#define SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES \ - (SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES + \ - SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES) - -/* offset of the time area */ -#define SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES \ - (SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES) - - - -/* start physical address of the SEP registers memory in HOST */ -#define SEP_IO_MEM_REGION_START_ADDRESS 0x80000000 - -/* size of the SEP registers memory region in HOST (for now 100 registers) */ -#define SEP_IO_MEM_REGION_SIZE (2 * 0x100000) - -/* define the number of IRQ for SEP interrupts */ -#define SEP_DIRVER_IRQ_NUM 1 - -/* maximum number of add buffers */ -#define SEP_MAX_NUM_ADD_BUFFERS 100 - -/* number of flows */ -#define SEP_DRIVER_NUM_FLOWS 4 - -/* maximum number of entries in flow table */ -#define SEP_DRIVER_MAX_FLOW_NUM_ENTRIES_IN_TABLE 25 - -/* offset of the num entries in the block length entry of the LLI */ -#define SEP_NUM_ENTRIES_OFFSET_IN_BITS 24 - -/* offset of the interrupt flag in the block length entry of the LLI */ -#define SEP_INT_FLAG_OFFSET_IN_BITS 31 - -/* mask for extracting data size from LLI */ -#define SEP_TABLE_DATA_SIZE_MASK 0xFFFFFF - -/* mask for entries after being shifted left */ -#define SEP_NUM_ENTRIES_MASK 0x7F - -/* default flow id */ -#define SEP_FREE_FLOW_ID 0xFFFFFFFF - -/* temp flow id used during cretiong of new flow until receiving - real flow id from sep */ -#define SEP_TEMP_FLOW_ID (SEP_DRIVER_NUM_FLOWS + 1) - -/* maximum add buffers message length in bytes */ -#define SEP_MAX_ADD_MESSAGE_LENGTH_IN_BYTES (7 * 4) - -/* maximum number of concurrent virtual buffers */ -#define SEP_MAX_VIRT_BUFFERS_CONCURRENT 100 - -/* the token that defines the start of time address */ -#define SEP_TIME_VAL_TOKEN 0x12345678 - -/* DEBUG LEVEL MASKS */ -#define SEP_DEBUG_LEVEL_BASIC 0x1 - -#define SEP_DEBUG_LEVEL_EXTENDED 0x4 - - -/* Debug helpers */ - -#define dbg(fmt, args...) \ -do {\ - if (debug & SEP_DEBUG_LEVEL_BASIC) \ - printk(KERN_DEBUG fmt, ##args); \ -} while(0); - -#define edbg(fmt, args...) \ -do { \ - if (debug & SEP_DEBUG_LEVEL_EXTENDED) \ - printk(KERN_DEBUG fmt, ##args); \ -} while(0); - - - -#endif |