1 files changed, 370 insertions, 0 deletions

diff --git a/drivers/staging/tm6000/tm6000-i2c.c b/drivers/staging/tm6000/tm6000-i2c.c
new file mode 100644
index 000000000000..94ff489a1bbb
--- /dev/null
+++ b/drivers/staging/tm6000/tm6000-i2c.c
@@ -0,0 +1,370 @@
+/*
+   tm6000-i2c.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+
+   Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+
+   Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
+	- Fix SMBus Read Byte command
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation version 2
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include "tuner-xc2028.h"
+
+
+/*FIXME: Hack to avoid needing to patch i2c-id.h */
+#define I2C_HW_B_TM6000 I2C_HW_B_EM28XX
+/* ----------------------------------------------------------- */
+
+static unsigned int i2c_debug = 0;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+
+#define i2c_dprintk(lvl,fmt, args...) if (i2c_debug>=lvl) do{ \
+			printk(KERN_DEBUG "%s at %s: " fmt, \
+			dev->name, __FUNCTION__ , ##args); } while (0)
+
+static int tm6000_i2c_send_regs(struct tm6000_core *dev, unsigned char addr,
+				__u8 reg, char *buf, int len)
+{
+	int rc;
+	unsigned int tsleep;
+	unsigned int i2c_packet_limit = 16;
+
+	if (dev->dev_type == TM6010)
+		i2c_packet_limit = 64;
+
+	if (!buf)
+		return -1;
+
+	if (len < 1 || len > i2c_packet_limit) {
+		printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n",
+			len, i2c_packet_limit);
+		return -1;
+	}
+
+	/* capture mutex */
+	rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
+		USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
+		addr | reg << 8, 0, buf, len);
+
+	if (rc < 0) {
+		/* release mutex */
+		return rc;
+	}
+
+	/* Calculate delay time, 14000us for 64 bytes */
+	tsleep = ((len * 200) + 200 + 1000) / 1000;
+	msleep(tsleep);
+
+	/* release mutex */
+	return rc;
+}
+
+/* Generic read - doesn't work fine with 16bit registers */
+static int tm6000_i2c_recv_regs(struct tm6000_core *dev, unsigned char addr,
+				__u8 reg, char *buf, int len)
+{
+	int rc;
+	u8 b[2];
+	unsigned int i2c_packet_limit = 16;
+
+	if (dev->dev_type == TM6010)
+		i2c_packet_limit = 64;
+
+	if (!buf)
+		return -1;
+
+	if (len < 1 || len > i2c_packet_limit) {
+		printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n",
+			len, i2c_packet_limit);
+		return -1;
+	}
+
+	/* capture mutex */
+	if ((dev->caps.has_zl10353) && (dev->demod_addr << 1 == addr) && (reg % 2 == 0)) {
+		/*
+		 * Workaround an I2C bug when reading from zl10353
+		 */
+		reg -= 1;
+		len += 1;
+
+		rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, b, len);
+
+		*buf = b[1];
+	} else {
+		rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, buf, len);
+	}
+
+	/* release mutex */
+	return rc;
+}
+
+/*
+ * read from a 16bit register
+ * for example xc2028, xc3028 or xc3028L
+ */
+static int tm6000_i2c_recv_regs16(struct tm6000_core *dev, unsigned char addr,
+				  __u16 reg, char *buf, int len)
+{
+	int rc;
+	unsigned char ureg;
+
+	if (!buf || len != 2)
+		return -1;
+
+	/* capture mutex */
+	if (dev->dev_type == TM6010) {
+		ureg = reg & 0xFF;
+		rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
+			USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
+			addr | (reg & 0xFF00), 0, &ureg, 1);
+
+		if (rc < 0) {
+			/* release mutex */
+			return rc;
+		}
+
+		msleep(1400 / 1000);
+		rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
+			USB_RECIP_DEVICE, REQ_35_AFTEK_TUNER_READ,
+			reg, 0, buf, len);
+	} else {
+		rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
+			USB_RECIP_DEVICE, REQ_14_SET_GET_I2C_WR2_RDN,
+			addr, reg, buf, len);
+	}
+
+	/* release mutex */
+	return rc;
+}
+
+static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
+			   struct i2c_msg msgs[], int num)
+{
+	struct tm6000_core *dev = i2c_adap->algo_data;
+	int addr, rc, i, byte;
+
+	if (num <= 0)
+		return 0;
+	for (i = 0; i < num; i++) {
+		addr = (msgs[i].addr << 1) & 0xff;
+		i2c_dprintk(2,"%s %s addr=0x%x len=%d:",
+			 (msgs[i].flags & I2C_M_RD) ? "read" : "write",
+			 i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
+		if (msgs[i].flags & I2C_M_RD) {
+			/* read request without preceding register selection */
+			/*
+			 * The TM6000 only supports a read transaction
+			 * immediately after a 1 or 2 byte write to select
+			 * a register.  We cannot fulfil this request.
+			 */
+			i2c_dprintk(2, " read without preceding write not"
+				       " supported");
+			rc = -EOPNOTSUPP;
+			goto err;
+		} else if (i + 1 < num && msgs[i].len <= 2 &&
+			   (msgs[i + 1].flags & I2C_M_RD) &&
+			   msgs[i].addr == msgs[i + 1].addr) {
+			/* 1 or 2 byte write followed by a read */
+			if (i2c_debug >= 2)
+				for (byte = 0; byte < msgs[i].len; byte++)
+					printk(" %02x", msgs[i].buf[byte]);
+			i2c_dprintk(2, "; joined to read %s len=%d:",
+				    i == num - 2 ? "stop" : "nonstop",
+				    msgs[i + 1].len);
+
+			if (msgs[i].len == 2) {
+				rc = tm6000_i2c_recv_regs16(dev, addr,
+					msgs[i].buf[0] << 8 | msgs[i].buf[1],
+					msgs[i + 1].buf, msgs[i + 1].len);
+			} else {
+				rc = tm6000_i2c_recv_regs(dev, addr, msgs[i].buf[0],
+					msgs[i + 1].buf, msgs[i + 1].len);
+			}
+
+			i++;
+
+			if (addr == dev->tuner_addr << 1) {
+				tm6000_set_reg(dev, REQ_50_SET_START, 0, 0);
+				tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0);
+			}
+			if (i2c_debug >= 2)
+				for (byte = 0; byte < msgs[i].len; byte++)
+					printk(" %02x", msgs[i].buf[byte]);
+		} else {
+			/* write bytes */
+			if (i2c_debug >= 2)
+				for (byte = 0; byte < msgs[i].len; byte++)
+					printk(" %02x", msgs[i].buf[byte]);
+			rc = tm6000_i2c_send_regs(dev, addr, msgs[i].buf[0],
+				msgs[i].buf + 1, msgs[i].len - 1);
+
+			if (addr == dev->tuner_addr  << 1) {
+				tm6000_set_reg(dev, REQ_50_SET_START, 0, 0);
+				tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0);
+			}
+		}
+		if (i2c_debug >= 2)
+			printk("\n");
+		if (rc < 0)
+			goto err;
+	}
+
+	return num;
+err:
+	i2c_dprintk(2," ERROR: %i\n", rc);
+	return rc;
+}
+
+static int tm6000_i2c_eeprom(struct tm6000_core *dev,
+			     unsigned char *eedata, int len)
+{
+	int i, rc;
+	unsigned char *p = eedata;
+	unsigned char bytes[17];
+
+	dev->i2c_client.addr = 0xa0 >> 1;
+
+	bytes[16] = '\0';
+	for (i = 0; i < len; ) {
+	*p = i;
+	rc = tm6000_i2c_recv_regs(dev, 0xa0, i, p, 1);
+		if (rc < 1) {
+			if (p == eedata)
+				goto noeeprom;
+			else {
+				printk(KERN_WARNING
+				"%s: i2c eeprom read error (err=%d)\n",
+				dev->name, rc);
+			}
+			return -1;
+		}
+		p++;
+		if (0 == (i % 16))
+			printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i);
+		printk(" %02x", eedata[i]);
+		if ((eedata[i] >= ' ') && (eedata[i] <= 'z')) {
+			bytes[i%16] = eedata[i];
+		} else {
+			bytes[i%16]='.';
+		}
+
+		i++;
+
+		if (0 == (i % 16)) {
+			bytes[16] = '\0';
+			printk("  %s\n", bytes);
+		}
+	}
+	if (0 != (i%16)) {
+		bytes[i%16] = '\0';
+		for (i %= 16; i < 16; i++)
+			printk("   ");
+	}
+	printk("  %s\n", bytes);
+
+	return 0;
+
+noeeprom:
+	printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
+		       dev->name, rc);
+	return rc;
+}
+
+/* ----------------------------------------------------------- */
+
+/*
+ * functionality()
+ */
+static u32 functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL;
+}
+
+#define mass_write(addr, reg, data...)					\
+	{ const static u8 _val[] = data;				\
+	rc=tm6000_read_write_usb(dev,USB_DIR_OUT | USB_TYPE_VENDOR,	\
+	REQ_16_SET_GET_I2C_WR1_RDN,(reg<<8)+addr, 0x00, (u8 *) _val,	\
+	ARRAY_SIZE(_val));						\
+	if (rc<0) {							\
+		printk(KERN_ERR "Error on line %d: %d\n",__LINE__,rc);	\
+		return rc;						\
+	}								\
+	msleep (10);							\
+	}
+
+static struct i2c_algorithm tm6000_algo = {
+	.master_xfer   = tm6000_i2c_xfer,
+	.functionality = functionality,
+};
+
+static struct i2c_adapter tm6000_adap_template = {
+	.owner = THIS_MODULE,
+	.class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL,
+	.name = "tm6000",
+	.id = I2C_HW_B_TM6000,
+	.algo = &tm6000_algo,
+};
+
+static struct i2c_client tm6000_client_template = {
+	.name = "tm6000 internal",
+};
+
+/* ----------------------------------------------------------- */
+
+/*
+ * tm6000_i2c_register()
+ * register i2c bus
+ */
+int tm6000_i2c_register(struct tm6000_core *dev)
+{
+	unsigned char eedata[256];
+
+	dev->i2c_adap = tm6000_adap_template;
+	dev->i2c_adap.dev.parent = &dev->udev->dev;
+	strcpy(dev->i2c_adap.name, dev->name);
+	dev->i2c_adap.algo_data = dev;
+	i2c_add_adapter(&dev->i2c_adap);
+
+	dev->i2c_client = tm6000_client_template;
+	dev->i2c_client.adapter = &dev->i2c_adap;
+
+	i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
+
+	tm6000_i2c_eeprom(dev, eedata, sizeof(eedata));
+
+	return 0;
+}
+
+/*
+ * tm6000_i2c_unregister()
+ * unregister i2c_bus
+ */
+int tm6000_i2c_unregister(struct tm6000_core *dev)
+{
+	i2c_del_adapter(&dev->i2c_adap);
+	return 0;
+}