aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/unisys/common-spar/include/channels/iochannel.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/unisys/common-spar/include/channels/iochannel.h')
-rw-r--r--drivers/staging/unisys/common-spar/include/channels/iochannel.h160
1 files changed, 80 insertions, 80 deletions
diff --git a/drivers/staging/unisys/common-spar/include/channels/iochannel.h b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
index 6dcfa6e78375..24e11858e0ee 100644
--- a/drivers/staging/unisys/common-spar/include/channels/iochannel.h
+++ b/drivers/staging/unisys/common-spar/include/channels/iochannel.h
@@ -213,7 +213,7 @@ typedef enum { NET_RCV_POST = 0, /* submit buffer to hold receiving
#endif /* MAX_MACADDR_LEN */
#define ETH_IS_LOCALLY_ADMINISTERED(Address) \
- (((U8 *) (Address))[0] & ((U8) 0x02))
+ (((u8 *) (Address))[0] & ((u8) 0x02))
#define NIC_VENDOR_ID 0x0008000B
/* various types of scsi task mgmt commands */
@@ -250,35 +250,35 @@ typedef enum { VDISK_MGMT_ACQUIRE = 1, VDISK_MGMT_RELEASE,
#pragma pack(push, 1)
struct guest_phys_info {
- U64 address;
- U64 length;
+ u64 address;
+ u64 length;
};
#define GPI_ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(struct guest_phys_info))
struct uisscsi_dest {
- U32 channel; /* channel == bus number */
- U32 id; /* id == target number */
- U32 lun; /* lun == logical unit number */
+ u32 channel; /* channel == bus number */
+ u32 id; /* id == target number */
+ u32 lun; /* lun == logical unit number */
};
struct vhba_wwnn {
- U32 wwnn1;
- U32 wwnn2;
+ u32 wwnn1;
+ u32 wwnn2;
};
/* WARNING: Values stired in this structure must contain maximum counts (not
* maximum values). */
struct vhba_config_max { /* 20 bytes */
- U32 max_channel; /* maximum channel for devices attached to this
+ u32 max_channel; /* maximum channel for devices attached to this
* bus */
- U32 max_id; /* maximum SCSI ID for devices attached to this
+ u32 max_id; /* maximum SCSI ID for devices attached to this
* bus */
- U32 max_lun; /* maximum SCSI LUN for devices attached to this
+ u32 max_lun; /* maximum SCSI LUN for devices attached to this
* bus */
- U32 cmd_per_lun; /* maximum number of outstanding commands per
+ u32 cmd_per_lun; /* maximum number of outstanding commands per
* lun that are allowed at one time */
- U32 max_io_size; /* maximum io size for devices attached to this
+ u32 max_io_size; /* maximum io size for devices attached to this
* bus */
/* max io size is often determined by the resource of the hba. e.g */
/* max scatter gather list length * page size / sector size */
@@ -287,9 +287,9 @@ struct vhba_config_max { /* 20 bytes */
struct uiscmdrsp_scsi {
void *scsicmd; /* the handle to the cmd that was received -
* send it back as is in the rsp packet. */
- U8 cmnd[MAX_CMND_SIZE]; /* the cdb for the command */
- U32 bufflen; /* length of data to be transferred out or in */
- U16 guest_phys_entries; /* Number of entries in scatter-gather (sg)
+ u8 cmnd[MAX_CMND_SIZE]; /* the cdb for the command */
+ u32 bufflen; /* length of data to be transferred out or in */
+ u16 guest_phys_entries; /* Number of entries in scatter-gather (sg)
* list */
struct guest_phys_info gpi_list[MAX_PHYS_INFO]; /* physical address
* information for each
@@ -302,8 +302,8 @@ struct uiscmdrsp_scsi {
* originator */
int linuxstat; /* the original Linux status - for use by linux
* vdisk code */
- U8 scsistat; /* the scsi status */
- U8 addlstat; /* non-scsi status - covers cases like timeout
+ u8 scsistat; /* the scsi status */
+ u8 addlstat; /* non-scsi status - covers cases like timeout
* needed by windows guests */
#define ADDL_RESET 1
#define ADDL_TIMEOUT 2
@@ -314,7 +314,7 @@ struct uiscmdrsp_scsi {
#define ADDL_RETRY 7
/* the following fields are need to determine the result of command */
- U8 sensebuf[MAX_SENSE_SIZE]; /* sense info in case cmd failed; */
+ u8 sensebuf[MAX_SENSE_SIZE]; /* sense info in case cmd failed; */
/* it holds the sense_data struct; */
/* see that struct for details. */
void *vdisk; /* contains pointer to the vdisk so that we can clean up
@@ -376,16 +376,16 @@ struct uiscmdrsp_scsi {
#define SET_NO_DISK_INQUIRY_RESULT(buf, len, lun, lun0notpresent, notpresent) \
do { \
- MEMSET(buf, 0, \
+ memset(buf, 0, \
MINNUM(len, \
(unsigned int) NO_DISK_INQUIRY_RESULT_LEN)); \
- buf[2] = (U8) SCSI_SPC2_VER; \
+ buf[2] = (u8) SCSI_SPC2_VER; \
if (lun == 0) { \
- buf[0] = (U8) lun0notpresent; \
- buf[3] = (U8) DEV_HISUPPORT; \
+ buf[0] = (u8) lun0notpresent; \
+ buf[3] = (u8) DEV_HISUPPORT; \
} else \
- buf[0] = (U8) notpresent; \
- buf[4] = (U8) ( \
+ buf[0] = (u8) notpresent; \
+ buf[4] = (u8) ( \
MINNUM(len, \
(unsigned int) NO_DISK_INQUIRY_RESULT_LEN) - 5); \
if (len >= NO_DISK_INQUIRY_RESULT_LEN) { \
@@ -430,21 +430,21 @@ struct uiscmdrsp_scsi {
* AdditionalSenseLength contains will be sizeof(sense_data)-8=10.
*/
struct sense_data {
- U8 ErrorCode:7;
- U8 Valid:1;
- U8 SegmentNumber;
- U8 SenseKey:4;
- U8 Reserved:1;
- U8 IncorrectLength:1;
- U8 EndOfMedia:1;
- U8 FileMark:1;
- U8 Information[4];
- U8 AdditionalSenseLength;
- U8 CommandSpecificInformation[4];
- U8 AdditionalSenseCode;
- U8 AdditionalSenseCodeQualifier;
- U8 FieldReplaceableUnitCode;
- U8 SenseKeySpecific[3];
+ u8 ErrorCode:7;
+ u8 Valid:1;
+ u8 SegmentNumber;
+ u8 SenseKey:4;
+ u8 Reserved:1;
+ u8 IncorrectLength:1;
+ u8 EndOfMedia:1;
+ u8 FileMark:1;
+ u8 Information[4];
+ u8 AdditionalSenseLength;
+ u8 CommandSpecificInformation[4];
+ u8 AdditionalSenseCode;
+ u8 AdditionalSenseCodeQualifier;
+ u8 FieldReplaceableUnitCode;
+ u8 SenseKeySpecific[3];
};
/* some SCSI ADSENSE codes */
@@ -487,15 +487,15 @@ struct net_pkt_xmt {
struct {
/* these are needed for csum at uisnic end */
- U8 valid; /* 1 = rest of this struct is valid - else
+ u8 valid; /* 1 = rest of this struct is valid - else
* ignore */
- U8 hrawoffv; /* 1 = hwrafoff is valid */
- U8 nhrawoffv; /* 1 = nhwrafoff is valid */
- U16 protocol; /* specifies packet protocol */
- U32 csum; /* value used to set skb->csum at IOPart */
- U32 hrawoff; /* value used to set skb->h.raw at IOPart */
+ u8 hrawoffv; /* 1 = hwrafoff is valid */
+ u8 nhrawoffv; /* 1 = nhwrafoff is valid */
+ u16 protocol; /* specifies packet protocol */
+ u32 csum; /* value used to set skb->csum at IOPart */
+ u32 hrawoff; /* value used to set skb->h.raw at IOPart */
/* hrawoff points to the start of the TRANSPORT LAYER HEADER */
- U32 nhrawoff; /* value used to set skb->nh.raw at IOPart */
+ u32 nhrawoff; /* value used to set skb->nh.raw at IOPart */
/* nhrawoff points to the start of the NETWORK LAYER HEADER */
} lincsum;
@@ -508,7 +508,7 @@ struct net_pkt_xmt {
};
struct net_pkt_xmtdone {
- U32 xmt_done_result; /* result of NET_XMIT */
+ u32 xmt_done_result; /* result of NET_XMIT */
#define XMIT_SUCCESS 0
#define XMIT_FAILED 1
};
@@ -529,7 +529,7 @@ struct net_pkt_rcvpost {
* to be describable */
struct phys_info frag; /* physical page information for the
* single fragment 2K rcv buf */
- U64 UniqueNum; /* This is used to make sure that
+ u64 UniqueNum; /* This is used to make sure that
* receive posts are returned to */
/* the Adapter which sent them origonally. */
};
@@ -538,25 +538,25 @@ struct net_pkt_rcv {
/* the number of receive buffers that can be chained */
/* is based on max mtu and size of each rcv buf */
- U32 rcv_done_len; /* length of received data */
- U8 numrcvbufs; /* number of receive buffers that contain the */
+ u32 rcv_done_len; /* length of received data */
+ u8 numrcvbufs; /* number of receive buffers that contain the */
/* incoming data; guest end MUST chain these together. */
void *rcvbuf[MAX_NET_RCV_CHAIN]; /* the list of receive buffers
* that must be chained; */
/* each entry is a receive buffer provided by NET_RCV_POST. */
/* NOTE: first rcvbuf in the chain will also be provided in net.buf. */
- U64 UniqueNum;
- U32 RcvsDroppedDelta;
+ u64 UniqueNum;
+ u32 RcvsDroppedDelta;
};
struct net_pkt_enbdis {
void *context;
- U16 enable; /* 1 = enable, 0 = disable */
+ u16 enable; /* 1 = enable, 0 = disable */
};
struct net_pkt_macaddr {
void *context;
- U8 macaddr[MAX_MACADDR_LEN]; /* 6 bytes */
+ u8 macaddr[MAX_MACADDR_LEN]; /* 6 bytes */
};
/* cmd rsp packet used for VNIC network traffic */
@@ -615,10 +615,10 @@ struct uiscmdrsp_scsitaskmgmt {
* Guest */
/* Note that the vHba pointer is not used by the Client/Guest side. */
struct uiscmdrsp_disknotify {
- U8 add; /* 0-remove, 1-add */
+ u8 add; /* 0-remove, 1-add */
void *vHba; /* Pointer to vhba_info for channel info to
* route msg */
- U32 channel, id, lun; /* SCSI Path of Disk to added or removed */
+ u32 channel, id, lun; /* SCSI Path of Disk to added or removed */
};
/* The following is used by virthba/vSCSI to send the Acquire/Release commands
@@ -695,15 +695,15 @@ typedef struct _ULTRA_IO_CHANNEL_PROTOCOL {
struct vhba_config_max max; /* 20 bytes */
} vhba; /* 28 */
struct {
- U8 macaddr[MAX_MACADDR_LEN]; /* 6 bytes */
- U32 num_rcv_bufs; /* 4 */
- U32 mtu; /* 4 */
+ u8 macaddr[MAX_MACADDR_LEN]; /* 6 bytes */
+ u32 num_rcv_bufs; /* 4 */
+ u32 mtu; /* 4 */
uuid_le zoneGuid; /* 16 */
} vnic; /* total 30 */
};
#define MAX_CLIENTSTRING_LEN 1024
- U8 clientString[MAX_CLIENTSTRING_LEN]; /* NULL terminated - so holds
+ u8 clientString[MAX_CLIENTSTRING_LEN]; /* NULL terminated - so holds
* max - 1 bytes */
} ULTRA_IO_CHANNEL_PROTOCOL;
@@ -777,9 +777,9 @@ typedef struct _ULTRA_IO_CHANNEL_PROTOCOL {
OFFSETOF(type, clientString); \
MEMCPY(chan->clientString, clientStr, \
MINNUM(clientStrLen, \
- (U32) (MAX_CLIENTSTRING_LEN - 1))); \
+ (u32) (MAX_CLIENTSTRING_LEN - 1))); \
chan->clientString[MINNUM(clientStrLen, \
- (U32) (MAX_CLIENTSTRING_LEN \
+ (u32) (MAX_CLIENTSTRING_LEN \
- 1))] \
= '\0'; \
} \
@@ -801,8 +801,8 @@ static inline int ULTRA_VHBA_init_channel(ULTRA_IO_CHANNEL_PROTOCOL *x,
struct vhba_wwnn *wwnn,
struct vhba_config_max *max,
unsigned char *clientStr,
- U32 clientStrLen, U64 bytes) {
- MEMSET(x, 0, sizeof(ULTRA_IO_CHANNEL_PROTOCOL));
+ u32 clientStrLen, u64 bytes) {
+ memset(x, 0, sizeof(ULTRA_IO_CHANNEL_PROTOCOL));
x->ChannelHeader.VersionId = ULTRA_VHBA_CHANNEL_PROTOCOL_VERSIONID;
x->ChannelHeader.Signature = ULTRA_VHBA_CHANNEL_PROTOCOL_SIGNATURE;
x->ChannelHeader.SrvState = CHANNELSRV_UNINITIALIZED;
@@ -833,12 +833,12 @@ static inline void ULTRA_VHBA_set_max(ULTRA_IO_CHANNEL_PROTOCOL *x,
static inline int ULTRA_VNIC_init_channel(ULTRA_IO_CHANNEL_PROTOCOL *x,
unsigned char *macaddr,
- U32 num_rcv_bufs, U32 mtu,
+ u32 num_rcv_bufs, u32 mtu,
uuid_le zoneGuid,
unsigned char *clientStr,
- U32 clientStrLen,
- U64 bytes) {
- MEMSET(x, 0, sizeof(ULTRA_IO_CHANNEL_PROTOCOL));
+ u32 clientStrLen,
+ u64 bytes) {
+ memset(x, 0, sizeof(ULTRA_IO_CHANNEL_PROTOCOL));
x->ChannelHeader.VersionId = ULTRA_VNIC_CHANNEL_PROTOCOL_VERSIONID;
x->ChannelHeader.Signature = ULTRA_VNIC_CHANNEL_PROTOCOL_SIGNATURE;
x->ChannelHeader.SrvState = CHANNELSRV_UNINITIALIZED;
@@ -882,22 +882,22 @@ static inline int ULTRA_VNIC_init_channel(ULTRA_IO_CHANNEL_PROTOCOL *x,
/* returns next non-zero index on success or zero on failure (i.e. out of
* room)
*/
-static INLINE U16
-add_physinfo_entries(U32 inp_pfn, /* input - specifies the pfn to be used
+static INLINE u16
+add_physinfo_entries(u32 inp_pfn, /* input - specifies the pfn to be used
* to add entries */
- U16 inp_off, /* input - specifies the off to be used
+ u16 inp_off, /* input - specifies the off to be used
* to add entries */
- U32 inp_len, /* input - specifies the len to be used
+ u32 inp_len, /* input - specifies the len to be used
* to add entries */
- U16 index, /* input - index in array at which new
+ u16 index, /* input - index in array at which new
* entries are added */
- U16 max_pi_arr_entries, /* input - specifies the maximum
+ u16 max_pi_arr_entries, /* input - specifies the maximum
* entries pi_arr can hold */
struct phys_info pi_arr[]) /* input & output - array to
* which entries are added */
{
- U32 len;
- U16 i, firstlen;
+ u32 len;
+ u16 i, firstlen;
firstlen = PI_PAGE_SIZE - inp_off;
if (inp_len <= firstlen) {
@@ -906,8 +906,8 @@ add_physinfo_entries(U32 inp_pfn, /* input - specifies the pfn to be used
if (index >= max_pi_arr_entries)
return 0;
pi_arr[index].pi_pfn = inp_pfn;
- pi_arr[index].pi_off = (U16) inp_off;
- pi_arr[index].pi_len = (U16) inp_len;
+ pi_arr[index].pi_off = (u16) inp_off;
+ pi_arr[index].pi_len = (u16) inp_len;
return index + 1;
}
@@ -925,7 +925,7 @@ add_physinfo_entries(U32 inp_pfn, /* input - specifies the pfn to be used
else {
pi_arr[index + i].pi_off = 0;
pi_arr[index + i].pi_len =
- (U16) MINNUM(len, (U32) PI_PAGE_SIZE);
+ (u16) MINNUM(len, (u32) PI_PAGE_SIZE);
}
}
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.