diff options
Diffstat (limited to 'drivers/thermal')
-rw-r--r-- | drivers/thermal/Kconfig | 1 | ||||
-rw-r--r-- | drivers/thermal/spear_thermal.c | 26 | ||||
-rw-r--r-- | drivers/thermal/thermal_sys.c | 88 |
3 files changed, 100 insertions, 15 deletions
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 514a691abea0..3ab2bd540b54 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -23,6 +23,7 @@ config SPEAR_THERMAL bool "SPEAr thermal sensor driver" depends on THERMAL depends on PLAT_SPEAR + depends on OF help Enable this to plug the SPEAr thermal sensor driver into the Linux thermal framework diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c index 69a55d46aaa6..5f8ee39f2000 100644 --- a/drivers/thermal/spear_thermal.c +++ b/drivers/thermal/spear_thermal.c @@ -20,9 +20,9 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/kernel.h> +#include <linux/of.h> #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/platform_data/spear_thermal.h> #include <linux/thermal.h> #define MD_FACTOR 1000 @@ -103,21 +103,20 @@ static int spear_thermal_probe(struct platform_device *pdev) { struct thermal_zone_device *spear_thermal = NULL; struct spear_thermal_dev *stdev; - struct spear_thermal_pdata *pdata; - int ret = 0; + struct device_node *np = pdev->dev.of_node; struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int ret = 0, val; + + if (!np || !of_property_read_u32(np, "st,thermal-flags", &val)) { + dev_err(&pdev->dev, "Failed: DT Pdata not passed\n"); + return -EINVAL; + } if (!stres) { dev_err(&pdev->dev, "memory resource missing\n"); return -ENODEV; } - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) { - dev_err(&pdev->dev, "platform data is NULL\n"); - return -EINVAL; - } - stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL); if (!stdev) { dev_err(&pdev->dev, "kzalloc fail\n"); @@ -144,7 +143,7 @@ static int spear_thermal_probe(struct platform_device *pdev) goto put_clk; } - stdev->flags = pdata->thermal_flags; + stdev->flags = val; writel_relaxed(stdev->flags, stdev->thermal_base); spear_thermal = thermal_zone_device_register("spear_thermal", 0, 0, @@ -189,6 +188,12 @@ static int spear_thermal_exit(struct platform_device *pdev) return 0; } +static const struct of_device_id spear_thermal_id_table[] = { + { .compatible = "st,thermal-spear1340" }, + {} +}; +MODULE_DEVICE_TABLE(of, spear_thermal_id_table); + static struct platform_driver spear_thermal_driver = { .probe = spear_thermal_probe, .remove = spear_thermal_exit, @@ -196,6 +201,7 @@ static struct platform_driver spear_thermal_driver = { .name = "spear_thermal", .owner = THIS_MODULE, .pm = &spear_thermal_pm_ops, + .of_match_table = of_match_ptr(spear_thermal_id_table), }, }; diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 32aa66d7d6b3..2ab31e4f02cc 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -240,6 +240,52 @@ trip_point_temp_show(struct device *dev, struct device_attribute *attr, } static ssize_t +trip_point_hyst_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int trip, ret; + unsigned long temperature; + + if (!tz->ops->set_trip_hyst) + return -EPERM; + + if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip)) + return -EINVAL; + + if (kstrtoul(buf, 10, &temperature)) + return -EINVAL; + + /* + * We are not doing any check on the 'temperature' value + * here. The driver implementing 'set_trip_hyst' has to + * take care of this. + */ + ret = tz->ops->set_trip_hyst(tz, trip, temperature); + + return ret ? ret : count; +} + +static ssize_t +trip_point_hyst_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int trip, ret; + unsigned long temperature; + + if (!tz->ops->get_trip_hyst) + return -EPERM; + + if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip)) + return -EINVAL; + + ret = tz->ops->get_trip_hyst(tz, trip, &temperature); + + return ret ? ret : sprintf(buf, "%ld\n", temperature); +} + +static ssize_t passive_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { @@ -1091,21 +1137,29 @@ EXPORT_SYMBOL(thermal_zone_device_update); static int create_trip_attrs(struct thermal_zone_device *tz, int mask) { int indx; + int size = sizeof(struct thermal_attr) * tz->trips; - tz->trip_type_attrs = - kzalloc(sizeof(struct thermal_attr) * tz->trips, GFP_KERNEL); + tz->trip_type_attrs = kzalloc(size, GFP_KERNEL); if (!tz->trip_type_attrs) return -ENOMEM; - tz->trip_temp_attrs = - kzalloc(sizeof(struct thermal_attr) * tz->trips, GFP_KERNEL); + tz->trip_temp_attrs = kzalloc(size, GFP_KERNEL); if (!tz->trip_temp_attrs) { kfree(tz->trip_type_attrs); return -ENOMEM; } - for (indx = 0; indx < tz->trips; indx++) { + if (tz->ops->get_trip_hyst) { + tz->trip_hyst_attrs = kzalloc(size, GFP_KERNEL); + if (!tz->trip_hyst_attrs) { + kfree(tz->trip_type_attrs); + kfree(tz->trip_temp_attrs); + return -ENOMEM; + } + } + + for (indx = 0; indx < tz->trips; indx++) { /* create trip type attribute */ snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH, "trip_point_%d_type", indx); @@ -1136,6 +1190,26 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask) device_create_file(&tz->device, &tz->trip_temp_attrs[indx].attr); + + /* create Optional trip hyst attribute */ + if (!tz->ops->get_trip_hyst) + continue; + snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH, + "trip_point_%d_hyst", indx); + + sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr); + tz->trip_hyst_attrs[indx].attr.attr.name = + tz->trip_hyst_attrs[indx].name; + tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO; + tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show; + if (tz->ops->set_trip_hyst) { + tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR; + tz->trip_hyst_attrs[indx].attr.store = + trip_point_hyst_store; + } + + device_create_file(&tz->device, + &tz->trip_hyst_attrs[indx].attr); } return 0; } @@ -1149,9 +1223,13 @@ static void remove_trip_attrs(struct thermal_zone_device *tz) &tz->trip_type_attrs[indx].attr); device_remove_file(&tz->device, &tz->trip_temp_attrs[indx].attr); + if (tz->ops->get_trip_hyst) + device_remove_file(&tz->device, + &tz->trip_hyst_attrs[indx].attr); } kfree(tz->trip_type_attrs); kfree(tz->trip_temp_attrs); + kfree(tz->trip_hyst_attrs); } /** |