aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/thunderbolt/switch.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thunderbolt/switch.c')
-rw-r--r--drivers/thunderbolt/switch.c40
1 files changed, 38 insertions, 2 deletions
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 52ff854f0d6c..cd96994dc094 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -863,6 +863,30 @@ static ssize_t key_store(struct device *dev, struct device_attribute *attr,
}
static DEVICE_ATTR(key, 0600, key_show, key_store);
+static void nvm_authenticate_start(struct tb_switch *sw)
+{
+ struct pci_dev *root_port;
+
+ /*
+ * During host router NVM upgrade we should not allow root port to
+ * go into D3cold because some root ports cannot trigger PME
+ * itself. To be on the safe side keep the root port in D0 during
+ * the whole upgrade process.
+ */
+ root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev);
+ if (root_port)
+ pm_runtime_get_noresume(&root_port->dev);
+}
+
+static void nvm_authenticate_complete(struct tb_switch *sw)
+{
+ struct pci_dev *root_port;
+
+ root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev);
+ if (root_port)
+ pm_runtime_put(&root_port->dev);
+}
+
static ssize_t nvm_authenticate_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -912,10 +936,18 @@ static ssize_t nvm_authenticate_store(struct device *dev,
sw->nvm->authenticating = true;
- if (!tb_route(sw))
+ if (!tb_route(sw)) {
+ /*
+ * Keep root port from suspending as long as the
+ * NVM upgrade process is running.
+ */
+ nvm_authenticate_start(sw);
ret = nvm_authenticate_host(sw);
- else
+ if (ret)
+ nvm_authenticate_complete(sw);
+ } else {
ret = nvm_authenticate_device(sw);
+ }
pm_runtime_mark_last_busy(&sw->dev);
pm_runtime_put_autosuspend(&sw->dev);
}
@@ -1334,6 +1366,10 @@ static int tb_switch_add_dma_port(struct tb_switch *sw)
if (ret <= 0)
return ret;
+ /* Now we can allow root port to suspend again */
+ if (!tb_route(sw))
+ nvm_authenticate_complete(sw);
+
if (status) {
tb_sw_info(sw, "switch flash authentication failed\n");
tb_switch_set_uuid(sw);