aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/8250/8250.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/8250/8250.c')
-rw-r--r--drivers/tty/serial/8250/8250.c156
1 files changed, 79 insertions, 77 deletions
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 8123f784bcda..3ba4234592bc 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -290,6 +290,9 @@ static const struct serial8250_config uart_config[] = {
UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
.flags = UART_CAP_FIFO,
},
+ [PORT_8250_CIR] = {
+ .name = "CIR port"
+ }
};
/* Uart divisor latch read */
@@ -1037,6 +1040,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
unsigned char save_lcr, save_mcr;
struct uart_port *port = &up->port;
unsigned long flags;
+ unsigned int old_capabilities;
if (!port->iobase && !port->mapbase && !port->membase)
return;
@@ -1087,6 +1091,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
/*
* We failed; there's nothing here
*/
+ spin_unlock_irqrestore(&port->lock, flags);
DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
scratch2, scratch3);
goto out;
@@ -1110,6 +1115,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
status1 = serial_in(up, UART_MSR) & 0xF0;
serial_out(up, UART_MCR, save_mcr);
if (status1 != 0x90) {
+ spin_unlock_irqrestore(&port->lock, flags);
DEBUG_AUTOCONF("LOOP test failed (%02x) ",
status1);
goto out;
@@ -1132,8 +1138,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
scratch = serial_in(up, UART_IIR) >> 6;
- DEBUG_AUTOCONF("iir=%d ", scratch);
-
switch (scratch) {
case 0:
autoconfig_8250(up);
@@ -1167,19 +1171,13 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
serial_out(up, UART_LCR, save_lcr);
- if (up->capabilities != uart_config[port->type].flags) {
- printk(KERN_WARNING
- "ttyS%d: detected caps %08x should be %08x\n",
- serial_index(port), up->capabilities,
- uart_config[port->type].flags);
- }
-
port->fifosize = uart_config[up->port.type].fifo_size;
+ old_capabilities = up->capabilities;
up->capabilities = uart_config[port->type].flags;
up->tx_loadsz = uart_config[port->type].tx_loadsz;
if (port->type == PORT_UNKNOWN)
- goto out;
+ goto out_lock;
/*
* Reset the UART.
@@ -1196,8 +1194,16 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
else
serial_out(up, UART_IER, 0);
- out:
+out_lock:
spin_unlock_irqrestore(&port->lock, flags);
+ if (up->capabilities != old_capabilities) {
+ printk(KERN_WARNING
+ "ttyS%d: detected caps %08x should be %08x\n",
+ serial_index(port), old_capabilities,
+ up->capabilities);
+ }
+out:
+ DEBUG_AUTOCONF("iir=%d ", scratch);
DEBUG_AUTOCONF("type=%s\n", uart_config[port->type].name);
}
@@ -1897,6 +1903,9 @@ static int serial8250_startup(struct uart_port *port)
unsigned char lsr, iir;
int retval;
+ if (port->type == PORT_8250_CIR)
+ return -ENODEV;
+
port->fifosize = uart_config[up->port.type].fifo_size;
up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
up->capabilities = uart_config[up->port.type].flags;
@@ -2202,6 +2211,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
+ int fifo_bug = 0;
switch (termios->c_cflag & CSIZE) {
case CS5:
@@ -2221,8 +2231,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
if (termios->c_cflag & CSTOPB)
cval |= UART_LCR_STOP;
- if (termios->c_cflag & PARENB)
+ if (termios->c_cflag & PARENB) {
cval |= UART_LCR_PARITY;
+ if (up->bugs & UART_BUG_PARITY)
+ fifo_bug = 1;
+ }
if (!(termios->c_cflag & PARODD))
cval |= UART_LCR_EPAR;
#ifdef CMSPAR
@@ -2246,7 +2259,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
fcr = uart_config[port->type].fcr;
- if (baud < 2400) {
+ if (baud < 2400 || fifo_bug) {
fcr &= ~UART_FCR_TRIGGER_MASK;
fcr |= UART_FCR_TRIGGER_1;
}
@@ -2336,7 +2349,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
serial_port_out(port, UART_EFR, efr);
}
-#ifdef CONFIG_ARCH_OMAP
+#ifdef CONFIG_ARCH_OMAP1
/* Workaround to enable 115200 baud on OMAP1510 internal ports */
if (cpu_is_omap1510() && is_omap_port(up)) {
if (baud == 115200) {
@@ -2426,7 +2439,7 @@ static unsigned int serial8250_port_size(struct uart_8250_port *pt)
{
if (pt->port.iotype == UPIO_AU)
return 0x1000;
-#ifdef CONFIG_ARCH_OMAP
+#ifdef CONFIG_ARCH_OMAP1
if (is_omap_port(pt))
return 0x16 << pt->port.regshift;
#endif
@@ -2550,7 +2563,10 @@ static int serial8250_request_port(struct uart_port *port)
{
struct uart_8250_port *up =
container_of(port, struct uart_8250_port, port);
- int ret = 0;
+ int ret;
+
+ if (port->type == PORT_8250_CIR)
+ return -ENODEV;
ret = serial8250_request_std_resource(up);
if (ret == 0 && port->type == PORT_RSA) {
@@ -2569,6 +2585,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
int probeflags = PROBE_ANY;
int ret;
+ if (port->type == PORT_8250_CIR)
+ return;
+
/*
* Find the region that we can probe for. This in turn
* tells us whether we can probe for the type of port.
@@ -2668,6 +2687,9 @@ static void __init serial8250_isa_init_ports(void)
return;
first = 0;
+ if (nr_uarts > UART_NR)
+ nr_uarts = UART_NR;
+
for (i = 0; i < nr_uarts; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
struct uart_port *port = &up->port;
@@ -2677,6 +2699,7 @@ static void __init serial8250_isa_init_ports(void)
init_timer(&up->timer);
up->timer.function = serial8250_timeout;
+ up->cur_iotype = 0xFF;
/*
* ALPHA_KLUDGE_MCR needs to be killed.
@@ -2728,13 +2751,9 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
for (i = 0; i < nr_uarts; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
- up->cur_iotype = 0xFF;
- }
-
- serial8250_isa_init_ports();
- for (i = 0; i < nr_uarts; i++) {
- struct uart_8250_port *up = &serial8250_ports[i];
+ if (up->port.dev)
+ continue;
up->port.dev = dev;
@@ -2859,9 +2878,6 @@ static struct console serial8250_console = {
static int __init serial8250_console_init(void)
{
- if (nr_uarts > UART_NR)
- nr_uarts = UART_NR;
-
serial8250_isa_init_ports();
register_console(&serial8250_console);
return 0;
@@ -2979,36 +2995,36 @@ void serial8250_resume_port(int line)
static int __devinit serial8250_probe(struct platform_device *dev)
{
struct plat_serial8250_port *p = dev->dev.platform_data;
- struct uart_port port;
+ struct uart_8250_port uart;
int ret, i, irqflag = 0;
- memset(&port, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));
if (share_irqs)
irqflag = IRQF_SHARED;
for (i = 0; p && p->flags != 0; p++, i++) {
- port.iobase = p->iobase;
- port.membase = p->membase;
- port.irq = p->irq;
- port.irqflags = p->irqflags;
- port.uartclk = p->uartclk;
- port.regshift = p->regshift;
- port.iotype = p->iotype;
- port.flags = p->flags;
- port.mapbase = p->mapbase;
- port.hub6 = p->hub6;
- port.private_data = p->private_data;
- port.type = p->type;
- port.serial_in = p->serial_in;
- port.serial_out = p->serial_out;
- port.handle_irq = p->handle_irq;
- port.handle_break = p->handle_break;
- port.set_termios = p->set_termios;
- port.pm = p->pm;
- port.dev = &dev->dev;
- port.irqflags |= irqflag;
- ret = serial8250_register_port(&port);
+ uart.port.iobase = p->iobase;
+ uart.port.membase = p->membase;
+ uart.port.irq = p->irq;
+ uart.port.irqflags = p->irqflags;
+ uart.port.uartclk = p->uartclk;
+ uart.port.regshift = p->regshift;
+ uart.port.iotype = p->iotype;
+ uart.port.flags = p->flags;
+ uart.port.mapbase = p->mapbase;
+ uart.port.hub6 = p->hub6;
+ uart.port.private_data = p->private_data;
+ uart.port.type = p->type;
+ uart.port.serial_in = p->serial_in;
+ uart.port.serial_out = p->serial_out;
+ uart.port.handle_irq = p->handle_irq;
+ uart.port.handle_break = p->handle_break;
+ uart.port.set_termios = p->set_termios;
+ uart.port.pm = p->pm;
+ uart.port.dev = &dev->dev;
+ uart.port.irqflags |= irqflag;
+ ret = serial8250_register_8250_port(&uart);
if (ret < 0) {
dev_err(&dev->dev, "unable to register port at index %d "
"(IO%lx MEM%llx IRQ%d): %d\n", i,
@@ -3081,7 +3097,7 @@ static struct platform_driver serial8250_isa_driver = {
static struct platform_device *serial8250_isa_devs;
/*
- * serial8250_register_port and serial8250_unregister_port allows for
+ * serial8250_register_8250_port and serial8250_unregister_port allows for
* 16x50 serial ports to be configured at run-time, to support PCMCIA
* modems and PCI multiport cards.
*/
@@ -3143,8 +3159,9 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
mutex_lock(&serial_mutex);
uart = serial8250_find_match_or_unused(&up->port);
- if (uart) {
- uart_remove_one_port(&serial8250_reg, &uart->port);
+ if (uart && uart->port.type != PORT_8250_CIR) {
+ if (uart->port.dev)
+ uart_remove_one_port(&serial8250_reg, &uart->port);
uart->port.iobase = up->port.iobase;
uart->port.membase = up->port.membase;
@@ -3155,6 +3172,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart->port.regshift = up->port.regshift;
uart->port.iotype = up->port.iotype;
uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF;
+ uart->bugs = up->bugs;
uart->port.mapbase = up->port.mapbase;
uart->port.private_data = up->port.private_data;
if (up->port.dev)
@@ -3198,29 +3216,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
EXPORT_SYMBOL(serial8250_register_8250_port);
/**
- * serial8250_register_port - register a serial port
- * @port: serial port template
- *
- * Configure the serial port specified by the request. If the
- * port exists and is in use, it is hung up and unregistered
- * first.
- *
- * The port is then probed and if necessary the IRQ is autodetected
- * If this fails an error is returned.
- *
- * On success the port is ready to use and the line number is returned.
- */
-int serial8250_register_port(struct uart_port *port)
-{
- struct uart_8250_port up;
-
- memset(&up, 0, sizeof(up));
- memcpy(&up.port, port, sizeof(*port));
- return serial8250_register_8250_port(&up);
-}
-EXPORT_SYMBOL(serial8250_register_port);
-
-/**
* serial8250_unregister_port - remove a 16x50 serial port at runtime
* @line: serial line number
*
@@ -3250,8 +3245,7 @@ static int __init serial8250_init(void)
{
int ret;
- if (nr_uarts > UART_NR)
- nr_uarts = UART_NR;
+ serial8250_isa_init_ports();
printk(KERN_INFO "Serial: 8250/16550 driver, "
"%d ports, IRQ sharing %sabled\n", nr_uarts,
@@ -3266,11 +3260,15 @@ static int __init serial8250_init(void)
if (ret)
goto out;
+ ret = serial8250_pnp_init();
+ if (ret)
+ goto unreg_uart_drv;
+
serial8250_isa_devs = platform_device_alloc("serial8250",
PLAT8250_DEV_LEGACY);
if (!serial8250_isa_devs) {
ret = -ENOMEM;
- goto unreg_uart_drv;
+ goto unreg_pnp;
}
ret = platform_device_add(serial8250_isa_devs);
@@ -3286,6 +3284,8 @@ static int __init serial8250_init(void)
platform_device_del(serial8250_isa_devs);
put_dev:
platform_device_put(serial8250_isa_devs);
+unreg_pnp:
+ serial8250_pnp_exit();
unreg_uart_drv:
#ifdef CONFIG_SPARC
sunserial_unregister_minors(&serial8250_reg, UART_NR);
@@ -3310,6 +3310,8 @@ static void __exit serial8250_exit(void)
platform_driver_unregister(&serial8250_isa_driver);
platform_device_unregister(isa_dev);
+ serial8250_pnp_exit();
+
#ifdef CONFIG_SPARC
sunserial_unregister_minors(&serial8250_reg, UART_NR);
#else
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.