1 files changed, 30 insertions, 4 deletions

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index a402878c9f30..38af306ca0e8 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -34,6 +34,7 @@
 #define PCI_DEVICE_ID_EXAR_XR17V4358		0x4358
 #define PCI_DEVICE_ID_EXAR_XR17V8358		0x8358
 
+#define UART_EXAR_INT0		0x80
 #define UART_EXAR_8XMODE	0x88	/* 8X sampling rate select */
 
 #define UART_EXAR_FCTR		0x08	/* Feature Control Register */
@@ -121,6 +122,7 @@ struct exar8250_board {
 struct exar8250 {
 	unsigned int		nr;
 	struct exar8250_board	*board;
+	void __iomem		*virt;
 	int			line[0];
 };
 
@@ -131,12 +133,9 @@ static int default_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 	const struct exar8250_board *board = priv->board;
 	unsigned int bar = 0;
 
-	if (!pcim_iomap_table(pcidev)[bar] && !pcim_iomap(pcidev, bar, 0))
-		return -ENOMEM;
-
 	port->port.iotype = UPIO_MEM;
 	port->port.mapbase = pci_resource_start(pcidev, bar) + offset;
-	port->port.membase = pcim_iomap_table(pcidev)[bar] + offset;
+	port->port.membase = priv->virt + offset;
 	port->port.regshift = board->reg_shift;
 
 	return 0;
@@ -420,6 +419,25 @@ static void pci_xr17v35x_exit(struct pci_dev *pcidev)
 	port->port.private_data = NULL;
 }
 
+/*
+ * These Exar UARTs have an extra interrupt indicator that could fire for a
+ * few interrupts that are not presented/cleared through IIR.  One of which is
+ * a wakeup interrupt when coming out of sleep.  These interrupts are only
+ * cleared by reading global INT0 or INT1 registers as interrupts are
+ * associated with channel 0. The INT[3:0] registers _are_ accessible from each
+ * channel's address space, but for the sake of bus efficiency we register a
+ * dedicated handler at the PCI device level to handle them.
+ */
+static irqreturn_t exar_misc_handler(int irq, void *data)
+{
+	struct exar8250 *priv = data;
+
+	/* Clear all PCI interrupts by reading INT0. No effect on IIR */
+	ioread8(priv->virt + UART_EXAR_INT0);
+
+	return IRQ_HANDLED;
+}
+
 static int
 exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 {
@@ -448,6 +466,9 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 		return -ENOMEM;
 
 	priv->board = board;
+	priv->virt = pcim_iomap(pcidev, bar, 0);
+	if (!priv->virt)
+		return -ENOMEM;
 
 	pci_set_master(pcidev);
 
@@ -461,6 +482,11 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 	uart.port.irq = pci_irq_vector(pcidev, 0);
 	uart.port.dev = &pcidev->dev;
 
+	rc = devm_request_irq(&pcidev->dev, uart.port.irq, exar_misc_handler,
+			 IRQF_SHARED, "exar_uart", priv);
+	if (rc)
+		return rc;
+
 	for (i = 0; i < nr_ports && i < maxnr; i++) {
 		rc = board->setup(priv, pcidev, &uart, i);
 		if (rc) {