diff options
Diffstat (limited to 'drivers/tty/serial/8250')
-rw-r--r-- | drivers/tty/serial/8250/8250_mtk.c | 16 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 29 |
2 files changed, 12 insertions, 33 deletions
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index dd5e1cede2b5..c3f933d10295 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -213,17 +213,17 @@ static int mtk8250_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); - pm_runtime_enable(&pdev->dev); - if (!pm_runtime_enabled(&pdev->dev)) { - err = mtk8250_runtime_resume(&pdev->dev); - if (err) - return err; - } + err = mtk8250_runtime_resume(&pdev->dev); + if (err) + return err; data->line = serial8250_register_8250_port(&uart); if (data->line < 0) return data->line; + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + return 0; } @@ -234,13 +234,11 @@ static int mtk8250_remove(struct platform_device *pdev) pm_runtime_get_sync(&pdev->dev); serial8250_unregister_port(data->line); + mtk8250_runtime_suspend(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); - if (!pm_runtime_status_suspended(&pdev->dev)) - mtk8250_runtime_suspend(&pdev->dev); - return 0; } diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index f776b3eafb96..3f779d25ec0c 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -552,30 +552,11 @@ static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) */ static void serial8250_clear_fifos(struct uart_8250_port *p) { - unsigned char fcr; - unsigned char clr_mask = UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT; - if (p->capabilities & UART_CAP_FIFO) { - /* - * Make sure to avoid changing FCR[7:3] and ENABLE_FIFO bits. - * In case ENABLE_FIFO is not set, there is nothing to flush - * so just return. Furthermore, on certain implementations of - * the 8250 core, the FCR[7:3] bits may only be changed under - * specific conditions and changing them if those conditions - * are not met can have nasty side effects. One such core is - * the 8250-omap present in TI AM335x. - */ - fcr = serial_in(p, UART_FCR); - - /* FIFO is not enabled, there's nothing to clear. */ - if (!(fcr & UART_FCR_ENABLE_FIFO)) - return; - - fcr |= clr_mask; - serial_out(p, UART_FCR, fcr); - - fcr &= ~clr_mask; - serial_out(p, UART_FCR, fcr); + serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(p, UART_FCR, 0); } } @@ -1467,7 +1448,7 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p) * Enable previously disabled RX interrupts. */ if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) { - serial8250_clear_fifos(p); + serial8250_clear_and_reinit_fifos(p); p->ier |= UART_IER_RLSI | UART_IER_RDI; serial_port_out(&p->port, UART_IER, p->ier); |