aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/8250
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/8250')
-rw-r--r--drivers/tty/serial/8250/8250_aspeed_vuart.c84
-rw-r--r--drivers/tty/serial/8250/8250_dw.c83
-rw-r--r--drivers/tty/serial/8250/8250_exar.c19
-rw-r--r--drivers/tty/serial/8250/8250_lpss.c21
-rw-r--r--drivers/tty/serial/8250/8250_mtk.c2
-rw-r--r--drivers/tty/serial/8250/8250_of.c31
-rw-r--r--drivers/tty/serial/8250/8250_pci.c300
-rw-r--r--drivers/tty/serial/8250/8250_port.c14
-rw-r--r--drivers/tty/serial/8250/Kconfig3
9 files changed, 188 insertions, 369 deletions
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 0438d9a905ce..6e67fd89445a 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -14,6 +14,8 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/clk.h>
@@ -22,6 +24,7 @@
#define ASPEED_VUART_GCRA 0x20
#define ASPEED_VUART_GCRA_VUART_EN BIT(0)
+#define ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY BIT(1)
#define ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD BIT(5)
#define ASPEED_VUART_GCRB 0x24
#define ASPEED_VUART_GCRB_HOST_SIRQ_MASK GENMASK(7, 4)
@@ -131,8 +134,53 @@ static ssize_t sirq_store(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR_RW(sirq);
+static ssize_t sirq_polarity_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+ u8 reg;
+
+ reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+ reg &= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY;
+
+ return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg ? 1 : 0);
+}
+
+static void aspeed_vuart_set_sirq_polarity(struct aspeed_vuart *vuart,
+ bool polarity)
+{
+ u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+
+ if (polarity)
+ reg |= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY;
+ else
+ reg &= ~ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY;
+
+ writeb(reg, vuart->regs + ASPEED_VUART_GCRA);
+}
+
+static ssize_t sirq_polarity_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 0, &val);
+ if (err)
+ return err;
+
+ aspeed_vuart_set_sirq_polarity(vuart, val != 0);
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(sirq_polarity);
+
static struct attribute *aspeed_vuart_attrs[] = {
&dev_attr_sirq.attr,
+ &dev_attr_sirq_polarity.attr,
&dev_attr_lpc_address.attr,
NULL,
};
@@ -302,8 +350,30 @@ static int aspeed_vuart_handle_irq(struct uart_port *port)
return 1;
}
+static void aspeed_vuart_auto_configure_sirq_polarity(
+ struct aspeed_vuart *vuart, struct device_node *syscon_np,
+ u32 reg_offset, u32 reg_mask)
+{
+ struct regmap *regmap;
+ u32 value;
+
+ regmap = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(regmap)) {
+ dev_warn(vuart->dev,
+ "could not get regmap for aspeed,sirq-polarity-sense\n");
+ return;
+ }
+ if (regmap_read(regmap, reg_offset, &value)) {
+ dev_warn(vuart->dev, "could not read hw strap table\n");
+ return;
+ }
+
+ aspeed_vuart_set_sirq_polarity(vuart, (value & reg_mask) == 0);
+}
+
static int aspeed_vuart_probe(struct platform_device *pdev)
{
+ struct of_phandle_args sirq_polarity_sense_args;
struct uart_8250_port port;
struct aspeed_vuart *vuart;
struct device_node *np;
@@ -402,6 +472,20 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
vuart->line = rc;
+ rc = of_parse_phandle_with_fixed_args(
+ np, "aspeed,sirq-polarity-sense", 2, 0,
+ &sirq_polarity_sense_args);
+ if (rc < 0) {
+ dev_dbg(&pdev->dev,
+ "aspeed,sirq-polarity-sense property not found\n");
+ } else {
+ aspeed_vuart_auto_configure_sirq_polarity(
+ vuart, sirq_polarity_sense_args.np,
+ sirq_polarity_sense_args.args[0],
+ BIT(sirq_polarity_sense_args.args[1]));
+ of_node_put(sirq_polarity_sense_args.np);
+ }
+
aspeed_vuart_set_enabled(vuart, true);
aspeed_vuart_set_host_tx_discard(vuart, true);
platform_set_drvdata(pdev, vuart);
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 1c72fdc2dd37..aab3cccc6789 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -280,9 +280,6 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
long rate;
int ret;
- if (IS_ERR(d->clk))
- goto out;
-
clk_disable_unprepare(d->clk);
rate = clk_round_rate(d->clk, baud * 16);
if (rate < 0)
@@ -293,8 +290,10 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
ret = clk_set_rate(d->clk, rate);
clk_prepare_enable(d->clk);
- if (!ret)
- p->uartclk = rate;
+ if (ret)
+ goto out;
+
+ p->uartclk = rate;
out:
p->status &= ~UPSTAT_AUTOCTS;
@@ -386,10 +385,10 @@ static int dw8250_probe(struct platform_device *pdev)
{
struct uart_8250_port uart = {}, *up = &uart;
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- int irq = platform_get_irq(pdev, 0);
struct uart_port *p = &up->port;
struct device *dev = &pdev->dev;
struct dw8250_data *data;
+ int irq;
int err;
u32 val;
@@ -398,11 +397,9 @@ static int dw8250_probe(struct platform_device *pdev)
return -EINVAL;
}
- if (irq < 0) {
- if (irq != -EPROBE_DEFER)
- dev_err(dev, "cannot get irq\n");
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
return irq;
- }
spin_lock_init(&p->lock);
p->mapbase = regs->start;
@@ -472,19 +469,18 @@ static int dw8250_probe(struct platform_device *pdev)
device_property_read_u32(dev, "clock-frequency", &p->uartclk);
/* If there is separate baudclk, get the rate from it. */
- data->clk = devm_clk_get(dev, "baudclk");
- if (IS_ERR(data->clk) && PTR_ERR(data->clk) != -EPROBE_DEFER)
- data->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(data->clk) && PTR_ERR(data->clk) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- if (!IS_ERR_OR_NULL(data->clk)) {
- err = clk_prepare_enable(data->clk);
- if (err)
- dev_warn(dev, "could not enable optional baudclk: %d\n",
- err);
- else
- p->uartclk = clk_get_rate(data->clk);
- }
+ data->clk = devm_clk_get_optional(dev, "baudclk");
+ if (data->clk == NULL)
+ data->clk = devm_clk_get_optional(dev, NULL);
+ if (IS_ERR(data->clk))
+ return PTR_ERR(data->clk);
+
+ err = clk_prepare_enable(data->clk);
+ if (err)
+ dev_warn(dev, "could not enable optional baudclk: %d\n", err);
+
+ if (data->clk)
+ p->uartclk = clk_get_rate(data->clk);
/* If no clock rate is defined, fail. */
if (!p->uartclk) {
@@ -493,17 +489,16 @@ static int dw8250_probe(struct platform_device *pdev)
goto err_clk;
}
- data->pclk = devm_clk_get(dev, "apb_pclk");
- if (IS_ERR(data->pclk) && PTR_ERR(data->pclk) == -EPROBE_DEFER) {
- err = -EPROBE_DEFER;
+ data->pclk = devm_clk_get_optional(dev, "apb_pclk");
+ if (IS_ERR(data->pclk)) {
+ err = PTR_ERR(data->pclk);
goto err_clk;
}
- if (!IS_ERR(data->pclk)) {
- err = clk_prepare_enable(data->pclk);
- if (err) {
- dev_err(dev, "could not enable apb_pclk\n");
- goto err_clk;
- }
+
+ err = clk_prepare_enable(data->pclk);
+ if (err) {
+ dev_err(dev, "could not enable apb_pclk\n");
+ goto err_clk;
}
data->rst = devm_reset_control_get_optional_exclusive(dev, NULL);
@@ -546,12 +541,10 @@ err_reset:
reset_control_assert(data->rst);
err_pclk:
- if (!IS_ERR(data->pclk))
- clk_disable_unprepare(data->pclk);
+ clk_disable_unprepare(data->pclk);
err_clk:
- if (!IS_ERR(data->clk))
- clk_disable_unprepare(data->clk);
+ clk_disable_unprepare(data->clk);
return err;
}
@@ -567,11 +560,9 @@ static int dw8250_remove(struct platform_device *pdev)
reset_control_assert(data->rst);
- if (!IS_ERR(data->pclk))
- clk_disable_unprepare(data->pclk);
+ clk_disable_unprepare(data->pclk);
- if (!IS_ERR(data->clk))
- clk_disable_unprepare(data->clk);
+ clk_disable_unprepare(data->clk);
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
@@ -604,11 +595,9 @@ static int dw8250_runtime_suspend(struct device *dev)
{
struct dw8250_data *data = dev_get_drvdata(dev);
- if (!IS_ERR(data->clk))
- clk_disable_unprepare(data->clk);
+ clk_disable_unprepare(data->clk);
- if (!IS_ERR(data->pclk))
- clk_disable_unprepare(data->pclk);
+ clk_disable_unprepare(data->pclk);
return 0;
}
@@ -617,11 +606,9 @@ static int dw8250_runtime_resume(struct device *dev)
{
struct dw8250_data *data = dev_get_drvdata(dev);
- if (!IS_ERR(data->pclk))
- clk_prepare_enable(data->pclk);
+ clk_prepare_enable(data->pclk);
- if (!IS_ERR(data->clk))
- clk_prepare_enable(data->clk);
+ clk_prepare_enable(data->clk);
return 0;
}
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 597eb9d16f21..108cd55f9c4d 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -166,6 +166,23 @@ static void xr17v35x_set_divisor(struct uart_port *p, unsigned int baud,
serial_port_out(p, 0x2, quot_frac);
}
+static int xr17v35x_startup(struct uart_port *port)
+{
+ /*
+ * First enable access to IER [7:5], ISR [5:4], FCR [5:4],
+ * MCR [7:5] and MSR [7:0]
+ */
+ serial_port_out(port, UART_XR_EFR, UART_EFR_ECB);
+
+ /*
+ * Make sure all interrups are masked until initialization is
+ * complete and the FIFOs are cleared
+ */
+ serial_port_out(port, UART_IER, 0);
+
+ return serial8250_do_startup(port);
+}
+
static void exar_shutdown(struct uart_port *port)
{
unsigned char lsr;
@@ -212,6 +229,8 @@ static int default_setup(struct exar8250 *priv, struct pci_dev *pcidev,
port->port.get_divisor = xr17v35x_get_divisor;
port->port.set_divisor = xr17v35x_set_divisor;
+
+ port->port.startup = xr17v35x_startup;
} else {
port->port.type = PORT_XR17D15X;
}
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 5f72ef3ea574..60eff3240c8a 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -221,17 +221,6 @@ static void qrk_serial_exit_dma(struct lpss8250 *lpss) {}
static int qrk_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
{
- struct pci_dev *pdev = to_pci_dev(port->dev);
- int ret;
-
- pci_set_master(pdev);
-
- ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
- if (ret < 0)
- return ret;
-
- port->irq = pci_irq_vector(pdev, 0);
-
qrk_serial_setup_dma(lpss, port);
return 0;
}
@@ -293,16 +282,22 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (ret)
return ret;
+ pci_set_master(pdev);
+
lpss = devm_kzalloc(&pdev->dev, sizeof(*lpss), GFP_KERNEL);
if (!lpss)
return -ENOMEM;
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (ret < 0)
+ return ret;
+
lpss->board = (struct lpss8250_board *)id->driver_data;
memset(&uart, 0, sizeof(struct uart_8250_port));
uart.port.dev = &pdev->dev;
- uart.port.irq = pdev->irq;
+ uart.port.irq = pci_irq_vector(pdev, 0);
uart.port.private_data = &lpss->data;
uart.port.type = PORT_16550A;
uart.port.iotype = UPIO_MEM;
@@ -337,6 +332,7 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
err_exit:
if (lpss->board->exit)
lpss->board->exit(lpss);
+ pci_free_irq_vectors(pdev);
return ret;
}
@@ -348,6 +344,7 @@ static void lpss8250_remove(struct pci_dev *pdev)
if (lpss->board->exit)
lpss->board->exit(lpss);
+ pci_free_irq_vectors(pdev);
}
static const struct lpss8250_board byt_board = {
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index b411ba4eb5e9..4d067f515f74 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -544,7 +544,7 @@ static int mtk8250_probe(struct platform_device *pdev)
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
- data->rx_wakeup_irq = platform_get_irq(pdev, 1);
+ data->rx_wakeup_irq = platform_get_irq_optional(pdev, 1);
return 0;
}
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 0826cfdbd406..92fbf46ce3bd 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -48,6 +48,36 @@ static inline void tegra_serial_handle_break(struct uart_port *port)
}
#endif
+static int of_8250_rs485_config(struct uart_port *port,
+ struct serial_rs485 *rs485)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ /* Clamp the delays to [0, 100ms] */
+ rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
+ rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U);
+
+ port->rs485 = *rs485;
+
+ /*
+ * Both serial8250_em485_init and serial8250_em485_destroy
+ * are idempotent
+ */
+ if (rs485->flags & SER_RS485_ENABLED) {
+ int ret = serial8250_em485_init(up);
+
+ if (ret) {
+ rs485->flags &= ~SER_RS485_ENABLED;
+ port->rs485.flags &= ~SER_RS485_ENABLED;
+ }
+ return ret;
+ }
+
+ serial8250_em485_destroy(up);
+
+ return 0;
+}
+
/*
* Fill a struct uart_port for a given device node
*/
@@ -178,6 +208,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
port->flags |= UPF_SKIP_TEST;
port->dev = &ofdev->dev;
+ port->rs485_config = of_8250_rs485_config;
switch (type) {
case PORT_TEGRA:
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 6adbadd6a56a..022924d5ad54 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -48,8 +48,6 @@ struct f815xxa_data {
int idx;
};
-#define PCI_NUM_BAR_RESOURCES 6
-
struct serial_private {
struct pci_dev *dev;
unsigned int nr;
@@ -89,7 +87,7 @@ setup_port(struct serial_private *priv, struct uart_8250_port *port,
{
struct pci_dev *dev = priv->dev;
- if (bar >= PCI_NUM_BAR_RESOURCES)
+ if (bar >= PCI_STD_NUM_BARS)
return -EINVAL;
if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
@@ -745,16 +743,8 @@ static int pci_ni8430_init(struct pci_dev *dev)
}
/* UART Port Control Register */
-#define NI16550_PCR_OFFSET 0x0f
-#define NI16550_PCR_RS422 0x00
-#define NI16550_PCR_ECHO_RS485 0x01
-#define NI16550_PCR_DTR_RS485 0x02
-#define NI16550_PCR_AUTO_RS485 0x03
-#define NI16550_PCR_WIRE_MODE_MASK 0x03
-#define NI16550_PCR_TXVR_ENABLE_BIT BIT(3)
-#define NI16550_PCR_RS485_TERMINATION_BIT BIT(6)
-#define NI16550_ACR_DTR_AUTO_DTR (0x2 << 3)
-#define NI16550_ACR_DTR_MANUAL_DTR (0x0 << 3)
+#define NI8430_PORTCON 0x0f
+#define NI8430_PORTCON_TXVR_ENABLE (1 << 3)
static int
pci_ni8430_setup(struct serial_private *priv,
@@ -776,117 +766,14 @@ pci_ni8430_setup(struct serial_private *priv,
return -ENOMEM;
/* enable the transceiver */
- writeb(readb(p + offset + NI16550_PCR_OFFSET) | NI16550_PCR_TXVR_ENABLE_BIT,
- p + offset + NI16550_PCR_OFFSET);
+ writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
+ p + offset + NI8430_PORTCON);
iounmap(p);
return setup_port(priv, port, bar, offset, board->reg_shift);
}
-static int pci_ni8431_config_rs485(struct uart_port *port,
- struct serial_rs485 *rs485)
-{
- u8 pcr, acr;
- struct uart_8250_port *up;
-
- up = container_of(port, struct uart_8250_port, port);
- acr = up->acr;
- pcr = port->serial_in(port, NI16550_PCR_OFFSET);
- pcr &= ~NI16550_PCR_WIRE_MODE_MASK;
-
- if (rs485->flags & SER_RS485_ENABLED) {
- /* RS-485 */
- if ((rs485->flags & SER_RS485_RX_DURING_TX) &&
- (rs485->flags & SER_RS485_RTS_ON_SEND)) {
- dev_dbg(port->dev, "Invalid 2-wire mode\n");
- return -EINVAL;
- }
-
- if (rs485->flags & SER_RS485_RX_DURING_TX) {
- /* Echo */
- dev_vdbg(port->dev, "2-wire DTR with echo\n");
- pcr |= NI16550_PCR_ECHO_RS485;
- acr |= NI16550_ACR_DTR_MANUAL_DTR;
- } else {
- /* Auto or DTR */
- if (rs485->flags & SER_RS485_RTS_ON_SEND) {
- /* Auto */
- dev_vdbg(port->dev, "2-wire Auto\n");
- pcr |= NI16550_PCR_AUTO_RS485;
- acr |= NI16550_ACR_DTR_AUTO_DTR;
- } else {
- /* DTR-controlled */
- /* No Echo */
- dev_vdbg(port->dev, "2-wire DTR no echo\n");
- pcr |= NI16550_PCR_DTR_RS485;
- acr |= NI16550_ACR_DTR_MANUAL_DTR;
- }
- }
- } else {
- /* RS-422 */
- dev_vdbg(port->dev, "4-wire\n");
- pcr |= NI16550_PCR_RS422;
- acr |= NI16550_ACR_DTR_MANUAL_DTR;
- }
-
- dev_dbg(port->dev, "write pcr: 0x%08x\n", pcr);
- port->serial_out(port, NI16550_PCR_OFFSET, pcr);
-
- up->acr = acr;
- port->serial_out(port, UART_SCR, UART_ACR);
- port->serial_out(port, UART_ICR, up->acr);
-
- /* Update the cache. */
- port->rs485 = *rs485;
-
- return 0;
-}
-
-static int pci_ni8431_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *uart, int idx)
-{
- u8 pcr, acr;
- struct pci_dev *dev = priv->dev;
- void __iomem *addr;
- unsigned int bar, offset = board->first_offset;
-
- if (idx >= board->num_ports)
- return 1;
-
- bar = FL_GET_BASE(board->flags);
- offset += idx * board->uart_offset;
-
- addr = pci_ioremap_bar(dev, bar);
- if (!addr)
- return -ENOMEM;
-
- /* enable the transceiver */
- writeb(readb(addr + NI16550_PCR_OFFSET) | NI16550_PCR_TXVR_ENABLE_BIT,
- addr + NI16550_PCR_OFFSET);
-
- pcr = readb(addr + NI16550_PCR_OFFSET);
- pcr &= ~NI16550_PCR_WIRE_MODE_MASK;
-
- /* set wire mode to default RS-422 */
- pcr |= NI16550_PCR_RS422;
- acr = NI16550_ACR_DTR_MANUAL_DTR;
-
- /* write port configuration to register */
- writeb(pcr, addr + NI16550_PCR_OFFSET);
-
- /* access and write to UART acr register */
- writeb(UART_ACR, addr + UART_SCR);
- writeb(acr, addr + UART_ICR);
-
- uart->port.rs485_config = &pci_ni8431_config_rs485;
-
- iounmap(addr);
-
- return setup_port(priv, uart, bar, offset, board->reg_shift);
-}
-
static int pci_netmos_9900_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
@@ -2023,15 +1910,6 @@ pci_moxa_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM 0x10E9
#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM 0x11D8
-#define PCIE_DEVICE_ID_NI_PXIE8430_2328 0x74C2
-#define PCIE_DEVICE_ID_NI_PXIE8430_23216 0x74C1
-#define PCI_DEVICE_ID_NI_PXI8431_4852 0x7081
-#define PCI_DEVICE_ID_NI_PXI8431_4854 0x70DE
-#define PCI_DEVICE_ID_NI_PXI8431_4858 0x70E3
-#define PCI_DEVICE_ID_NI_PXI8433_4852 0x70E9
-#define PCI_DEVICE_ID_NI_PXI8433_4854 0x70ED
-#define PCIE_DEVICE_ID_NI_PXIE8431_4858 0x74C4
-#define PCIE_DEVICE_ID_NI_PXIE8431_48516 0x74C3
#define PCI_DEVICE_ID_MOXA_CP102E 0x1024
#define PCI_DEVICE_ID_MOXA_CP102EL 0x1025
@@ -2269,87 +2147,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.setup = pci_ni8430_setup,
.exit = pci_ni8430_exit,
},
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCIE_DEVICE_ID_NI_PXIE8430_2328,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8430_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCIE_DEVICE_ID_NI_PXIE8430_23216,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8430_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8431_4852,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8431_4854,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8431_4858,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8433_4852,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCI_DEVICE_ID_NI_PXI8433_4854,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCIE_DEVICE_ID_NI_PXIE8431_4858,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_NI,
- .device = PCIE_DEVICE_ID_NI_PXIE8431_48516,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .init = pci_ni8430_init,
- .setup = pci_ni8431_setup,
- .exit = pci_ni8430_exit,
- },
/* Quatech */
{
.vendor = PCI_VENDOR_ID_QUATECH,
@@ -3106,13 +2903,6 @@ enum pci_board_num_t {
pbn_ni8430_4,
pbn_ni8430_8,
pbn_ni8430_16,
- pbn_ni8430_pxie_8,
- pbn_ni8430_pxie_16,
- pbn_ni8431_2,
- pbn_ni8431_4,
- pbn_ni8431_8,
- pbn_ni8431_pxie_8,
- pbn_ni8431_pxie_16,
pbn_ADDIDATA_PCIe_1_3906250,
pbn_ADDIDATA_PCIe_2_3906250,
pbn_ADDIDATA_PCIe_4_3906250,
@@ -3765,55 +3555,6 @@ static struct pciserial_board pci_boards[] = {
.uart_offset = 0x10,
.first_offset = 0x800,
},
- [pbn_ni8430_pxie_16] = {
- .flags = FL_BASE0,
- .num_ports = 16,
- .base_baud = 3125000,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8430_pxie_8] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 3125000,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_8] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 3686400,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_4] = {
- .flags = FL_BASE0,
- .num_ports = 4,
- .base_baud = 3686400,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_2] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 3686400,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_pxie_16] = {
- .flags = FL_BASE0,
- .num_ports = 16,
- .base_baud = 3125000,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
- [pbn_ni8431_pxie_8] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 3125000,
- .uart_offset = 0x10,
- .first_offset = 0x800,
- },
/*
* ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com>
*/
@@ -4060,7 +3801,7 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
return -ENODEV;
num_iomem = num_port = 0;
- for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+ for (i = 0; i < PCI_STD_NUM_BARS; i++) {
if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
num_port++;
if (first_port == -1)
@@ -4088,7 +3829,7 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
*/
first_port = -1;
num_port = 0;
- for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+ for (i = 0; i < PCI_STD_NUM_BARS; i++) {
if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
pci_resource_len(dev, i) == 8 &&
(first_port == -1 || (first_port + num_port) == i)) {
@@ -5567,33 +5308,6 @@ static const struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_4 },
- { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8430_2328,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_pxie_8 },
- { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8430_23216,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8430_pxie_16 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4852,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_2 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4854,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_4 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8431_4858,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_8 },
- { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8431_4858,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_pxie_8 },
- { PCI_VENDOR_ID_NI, PCIE_DEVICE_ID_NI_PXIE8431_48516,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_pxie_16 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8433_4852,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_2 },
- { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8433_4854,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_ni8431_4 },
/*
* MOXA
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 8407166610ce..90655910b0c7 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2114,20 +2114,6 @@ int serial8250_do_startup(struct uart_port *port)
enable_rsa(up);
#endif
- if (port->type == PORT_XR17V35X) {
- /*
- * First enable access to IER [7:5], ISR [5:4], FCR [5:4],
- * MCR [7:5] and MSR [7:0]
- */
- serial_port_out(port, UART_XR_EFR, UART_EFR_ECB);
-
- /*
- * Make sure all interrups are masked until initialization is
- * complete and the FIFOs are cleared
- */
- serial_port_out(port, UART_IER, 0);
- }
-
/*
* Clear the FIFO buffers and disable them.
* (they will be reenabled in set_termios())
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 7ef60f8b6e2c..fab3d4f20667 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -243,6 +243,7 @@ config SERIAL_8250_ASPEED_VUART
tristate "Aspeed Virtual UART"
depends on SERIAL_8250
depends on OF
+ depends on REGMAP && MFD_SYSCON
help
If you want to use the virtual UART (VUART) device on Aspeed
BMC platforms, enable this option. This enables the 16550A-
@@ -334,7 +335,7 @@ config SERIAL_8250_BCM2835AUX
Features and limitations of the UART are
Registers are similar to 16650 registers,
- set bits in the control registers that are unsupported
+ set bits in the control registers that are unsupported
are ignored and read back as 0
7/8 bit operation with 1 start and 1 stop bit
8 symbols deep fifo for rx and tx
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.