1 files changed, 24 insertions, 21 deletions

diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 80b6b1b1f725..35ee6a2c6877 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -955,7 +955,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
 /* Calculate the chartime depending on baudrate, numbor of bits etc. */
 static void update_char_time(struct e100_serial * info)
 {
-	tcflag_t cflags = info->port.tty->termios->c_cflag;
+	tcflag_t cflags = info->port.tty->termios.c_cflag;
 	int bits;
 
 	/* calc. number of bits / data byte */
@@ -1473,7 +1473,7 @@ rs_stop(struct tty_struct *tty)
 		xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char,
 				STOP_CHAR(info->port.tty));
 		xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop);
-		if (tty->termios->c_iflag & IXON ) {
+		if (tty->termios.c_iflag & IXON ) {
 			xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
 		}
 
@@ -1496,7 +1496,7 @@ rs_start(struct tty_struct *tty)
 					 info->xmit.tail,SERIAL_XMIT_SIZE)));
 		xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty));
 		xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
-		if (tty->termios->c_iflag & IXON ) {
+		if (tty->termios.c_iflag & IXON ) {
 			xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
 		}
 
@@ -2929,7 +2929,7 @@ shutdown(struct e100_serial * info)
 			descr[i].buf = 0;
 		}
 
-	if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
+	if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) {
 		/* hang up DTR and RTS if HUPCL is enabled */
 		e100_dtr(info, 0);
 		e100_rts(info, 0); /* could check CRTSCTS before doing this */
@@ -2953,12 +2953,12 @@ change_speed(struct e100_serial *info)
 	unsigned long flags;
 	/* first some safety checks */
 
-	if (!info->port.tty || !info->port.tty->termios)
+	if (!info->port.tty)
 		return;
 	if (!info->ioport)
 		return;
 
-	cflag = info->port.tty->termios->c_cflag;
+	cflag = info->port.tty->termios.c_cflag;
 
 	/* possibly, the tx/rx should be disabled first to do this safely */
 
@@ -3088,7 +3088,7 @@ change_speed(struct e100_serial *info)
 	info->ioport[REG_REC_CTRL] = info->rx_ctrl;
 	xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty));
 	xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
-	if (info->port.tty->termios->c_iflag & IXON ) {
+	if (info->port.tty->termios.c_iflag & IXON ) {
 		DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n",
 				STOP_CHAR(info->port.tty)));
 		xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
@@ -3355,7 +3355,7 @@ rs_throttle(struct tty_struct * tty)
 	DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty)));
 
 	/* Do RTS before XOFF since XOFF might take some time */
-	if (tty->termios->c_cflag & CRTSCTS) {
+	if (tty->termios.c_cflag & CRTSCTS) {
 		/* Turn off RTS line */
 		e100_rts(info, 0);
 	}
@@ -3377,7 +3377,7 @@ rs_unthrottle(struct tty_struct * tty)
 	DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty)));
 	DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count));
 	/* Do RTS before XOFF since XOFF might take some time */
-	if (tty->termios->c_cflag & CRTSCTS) {
+	if (tty->termios.c_cflag & CRTSCTS) {
 		/* Assert RTS line  */
 		e100_rts(info, 1);
 	}
@@ -3748,7 +3748,7 @@ rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios->c_cflag & CRTSCTS)) {
+	    !(tty->termios.c_cflag & CRTSCTS)) {
 		tty->hw_stopped = 0;
 		rs_start(tty);
 	}
@@ -3815,7 +3815,7 @@ rs_close(struct tty_struct *tty, struct file * filp)
 	 * separate termios for callout and dialin.
 	 */
 	if (info->flags & ASYNC_NORMAL_ACTIVE)
-		info->normal_termios = *tty->termios;
+		info->normal_termios = tty->termios;
 	/*
 	 * Now we wait for the transmit buffer to clear; and we notify
 	 * the line discipline to only process XON/XOFF characters.
@@ -3976,7 +3976,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 	 */
 	if (tty_hung_up_p(filp) ||
 	    (info->flags & ASYNC_CLOSING)) {
-		wait_event_interruptible_tty(info->close_wait,
+		wait_event_interruptible_tty(tty, info->close_wait,
 			!(info->flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
 		if (info->flags & ASYNC_HUP_NOTIFY)
@@ -3998,7 +3998,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 		return 0;
 	}
 
-	if (tty->termios->c_cflag & CLOCAL) {
+	if (tty->termios.c_cflag & CLOCAL) {
 			do_clocal = 1;
 	}
 
@@ -4052,9 +4052,9 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 		printk("block_til_ready blocking: ttyS%d, count = %d\n",
 		       info->line, info->count);
 #endif
-		tty_unlock();
+		tty_unlock(tty);
 		schedule();
-		tty_lock();
+		tty_lock(tty);
 	}
 	set_current_state(TASK_RUNNING);
 	remove_wait_queue(&info->open_wait, &wait);
@@ -4115,7 +4115,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
 	 */
 	if (tty_hung_up_p(filp) ||
 	    (info->flags & ASYNC_CLOSING)) {
-		wait_event_interruptible_tty(info->close_wait,
+		wait_event_interruptible_tty(tty, info->close_wait,
 			!(info->flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
 		return ((info->flags & ASYNC_HUP_NOTIFY) ?
@@ -4219,7 +4219,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
 	}
 
 	if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
-		*tty->termios = info->normal_termios;
+		tty->termios = info->normal_termios;
 		change_speed(info);
 	}
 
@@ -4443,14 +4443,12 @@ static int __init rs_init(void)
 		B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
 	driver->init_termios.c_ispeed = 115200;
 	driver->init_termios.c_ospeed = 115200;
-	driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	driver->flags = TTY_DRIVER_REAL_RAW;
 
 	tty_set_operations(driver, &rs_ops);
         serial_driver = driver;
-	if (tty_register_driver(driver))
-		panic("Couldn't register serial driver\n");
-	/* do some initializing for the separate ports */
 
+	/* do some initializing for the separate ports */
 	for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) {
 		if (info->enabled) {
 			if (cris_request_io_interface(info->io_if,
@@ -4502,7 +4500,12 @@ static int __init rs_init(void)
 			printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n",
 			       serial_driver->name, info->line, info->ioport);
 		}
+		tty_port_link_device(&info->port, driver, i);
 	}
+
+	if (tty_register_driver(driver))
+		panic("Couldn't register serial driver\n");
+
 #ifdef CONFIG_ETRAX_FAST_TIMER
 #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
 	memset(fast_timers, 0, sizeof(fast_timers));